Answer:
The approach you find to help identify sketches that are not fully constrained by making sure you have not overly dimensioned the sketch. Also, look at the color of the curves blue indicates not fully defined, you can drag to move the entity or change its size.
The source is internet and self-knowledge.
Hope this helps!
Please help. I'm not too sure!
Answer:
I think it would be 83% because petroleum, natural gas, and coal are fossil fuels.
when lifting an engine out of a vehicle, tech a says to lift the engine by looping straps around the rocker arm shafts. tech b says to lift the engine by using a strap under the oil pan. who is right?
Since tech a says to lift the engine by looping straps around the rocker arm shafts and tech b says to lift the engine by using a strap under the oil pan. Neither of them is correct.
How should an engine be lifted correctly?Through direct contact between these components and the tappets and in accordance with the movement of the shaft, the rocker arm is the component in charge of transferring the movement of the camshaft towards the engine's intake and exhaust valves.
Therefore, in lifting, your chains should be in the middle of the hoist hook and the engine. To make certain that everything is disconnected, start carefully jacking up the engine. As soon as the engine is free of the car, continue jacking. Lower the engine onto blocks for security and support after moving the hoist to the desired location.
Thus the two technicians are not correct.
Learn more about lifting engine from
https://brainly.com/question/10663813
#SPJ1
Your job is to order and connect lead-acid cells used to supply an uninterruptible power supply (UPS). The battery output voltage must be 126 V and have a current capacity of not less than 250 A-hr. Each cell has a rating of 2 V and 100 A-hr. How many cells must be ordered and how would you connect them?
189 cells must be ordered and how would you connect them.
What is lead acid cells?Lead acid batteries are affordable, practical, and suitable for a wide range of battery power applications. They are arguably best recognized for their use in traditional internal combustion automobiles, where they provide the power for all of the electronics, starting, and other functions.
The lead acid battery has several benefits for starting internal combustion engines as well as many other applications. They have a big current and surge capability, which is perfect.
Lead acid batteries are a well-recognized technology that may be produced with ease using tools that are rather low-tech.
Therefore, 189 cells must be ordered and how would you connect them.
To learn more about led cells, refer to the link:
https://brainly.com/question/12699760
#SPJ1
The FFA degree program rewards active FFA members for progress in all phases of
FFA is organized as a degree course that benefits active FFA members for advancement in all stages of leadership, skills, and occupational development. At the chapter level, the Greenhand FFA Degree and the Chapter FFA Degree are conferred.
What is FFA degree program?The Discovery FFA Degree is the first degree available to members in the seventh and eighth grades who participate in FFA activities.
The Greenhand FFA Degree is given to members in ninth grade or older who learn about the FFA's history, mission, creed, and emblem and plan an SAE.
FFA is structured as a degree program that benefits active FFA members in all stages of leadership, skill development, and occupational development.
Thus, the FFA degree program rewards active FFA members for progress in all phases of leadership, skills, and occupational development.
For more details regarding FFA degree program, visit:
https://brainly.com/question/5305752
#SPJ1
Answer:
FFA is structured into a degree program which rewards active FFA members for progress in all phases of leadership, skills and occupational development.
Explanation:
what gauge wire does one need for a twenty amp fixture and and twenty foot run?
Answer: #12 AWG Wire.
Explanation:
Answer the following question in a paragraph (5-6 sentences). You may type your answer directly into this assignment.
How is the engineering design process used when designing and constructing a new product?
The engineering design process is used when designing and constructing a new product as the process starts with defining a problem and conducting background research on it.
How to illustrate the information?The requirements are specified, and a solution is selected. A solution prototype is created and tested. If the built solution meets the requirements, the results can be shared.
The engineering design process is a set of steps that engineers take to solve a problem.
Problem-solving processes such as determining your objectives and constraints, prototyping, testing, and evaluation are among the steps.
The primary responsibility of the design engineer when developing new designs is to create a product design that meets the strategic goals of a company or client while integrating the needs of the marketing, sales, and manufacturing departments.
Learn more about engineering on:
https://brainly.com/question/17169621
#SPJ1
Consider a scenario where you are a security analyst for a Linux-based system. You see a user called gamma running a process called exploreallfiles that is not authorized on the system.
Answer:
There are a few steps that could be taken to investigate this scenario:
1. Check the process list to see what exploreallfiles is doing. This can be done with the "ps" command.
2. Check the system logs to see if there are any entries related to exploreallfiles. This can be done with the "grep" command.
3. Check the file permissions on exploreallfiles to see if the user gamma has the appropriate permissions to run it. This can be done with the "ls" command.
4. If necessary, escalate the issue to a higher level of authority to take appropriate action.
What is a shotstring?
Answer:
837
Explanation:
Answer: What you see when you test a gun on a pattern plate.
Explanation: A guess
What is one of the five basic rules of S.M.A.R.T. firearm safety?
O Always keep the firearm pointed in a safe direction
O Always use ammunition made by the same manufacturer
O Always be sure to fire within your safe zone of fire
O Always cross obstacles with the help of another hunter
What types of plumbing supplies are more expensive?
Are the more expensive supplies better? And if so how?
What careers are usually unchanged by market factors?
The careers that are usually unchanged by market factors are:
TeachingDoctorEngineeringHR, etc.What three things influence your choice of career?There are a variety of elements that may affect your choices, but the ones that spring to mind first when considering a career are the work description, the training and education needed, the career prospects, and the income.
Note that your future career decision will be heavily influenced by your talents and qualifications as well as market factors.
Therefore, Consumer behavior and economic trends are examples of market dynamics, which can have an impact on a certain sales market. This can include any factors or occurrences that could affect how much money a company makes. These factors can be general, like the economy of a nation, or more specific, like the demographics of a particular area.
Learn more about careers from
https://brainly.com/question/6947486
#SPJ1
Are the more expensive plumbing supplies better? If so why?
Answer:
The higher priced faucets are made of materials such as solid brass, which generally provide a superior look, better performance, and durability.
In regards to nm cable, where were the uses of "romex" cable NOT permitted as listed in the 2020 national electric code book?
In regards to nm cable, the use of "Romex" cable was NOT permitted as listed in the 2020 national electric code book in the house (especially the basement, attic, or inside the home).
What is a Romex Cable?RomexTM is a form of home wire that is classified as an underground feeder (UF) or non-metallic sheathed cable by the National Electrical Code (NEC) (NM and NMC). NM and NMC conductors are made up of two or more insulated conductors surrounded by a non-metallic sheath.
"12-2" or "12-3" will be assigned to a Romex Cable. This is how you can identify it. The first digit specifies the wire's gauge. Typically, you have a choice of 10, 12, or 14 gauge. The second digit represents the number of conductors.
Learn more about Romex Cable:
https://brainly.com/question/24220370
#SPJ1
You are working on an electronic circuit. The circuit current is 5 mA. A resistor is marked with the following bands: brown, black, red, gold. A voltmeter measures a voltage drop of 6.5 V across the resistor. Is this resistor within its tolerance rating?
It should be noted that the resistor is NOT within its tolerance rating since the value of R = 1,300Ω.
What is a Tolerance Rating?The tolerance of a resistor is its variation from its nominal value. It is presented as a percentage and was tested at 25°C with no load applied. Tolerances on certain resistor designs are exceedingly tight. Precision wire-wound resistors, for example, are manufactured with tolerances as fine as 0.005%.
The resistor value may be estimated using the resistor color coding table. The value of resistance may be calculated using Ohm's law.
Ohm's law asserts that if all physical conditions and temperatures are constant, the voltage across a conductor is precisely proportional to the current flowing through it. The proportionality constant, R, is denoted by the symbol Ω and has units of ohms in the equation.
With regard to the above problem, we know that:
The markings of the resistor (bands) are:
Brown = 1
Black = 0
Red = 10²
Gold ± 5%
Hence, the value of the resistor is:
Rt (Resistance True Value) = 10 x 10² ± 5%
Where ±5 is the tolerance level
Rt = 1000 ± 5% ⇒ 950Ω to 1050Ω
Referencing Ohms Law,
R = V/I
Where
R = Resistance
V = Voltage
I = Current
R = 6.5/5mA
R = (6.5/5) x 10³
R = 1.3 x 10³
R = 1, 300Ω
Since Measure Resistance 1, 300Ω is greater than the Resistance True value, we can conclude that the resistor is NOT within its tolerance rating.
Learn more about Resistors:
https://brainly.com/question/24297401
#SPJ1
A condition in which body temperature drops a few degrees below normal is known a
1. heat stress
2. cold stroke
3. cold stress
4. heat exhaustion
Which two energy sources together provided more than 50 per cent of the energy needs of the USA in the year 1980
Hydropower 5%
Nuclear 4%
Other (wind, solar, geothermal) 1%
Coal 23%
Natural Gas 25%
Oil 42%
Options:
a) Nuclear and natural gas
b) Oil and coal
c) Hydropower and oil
d) Natural gas and coal
The two energy sources that combined together to provide more than 50 percent of the energy needs of the USA in the year 1980 is: b) Oil and coal.
What is energy?In Science, energy can be defined as a measure of the ability of a physical body to do work. This ultimately implies that, energy must be possessed or transferred to a physical object or physical body before it can be used in doing a work or heating a system.
The forms of energy.In Science, there are different forms of energy and these include the following;
Wind energyKinetic energy.Gravitational energy.Potential energy.Elastic energyChemical energy.Solar energy.Nuclear energy.Based on the information provided, the two energy sources that would provide more than 50 percent of the energy needs of the USA in the year 1980 when added together should be calculated as follows:
Nuclear and natural gas = 4% + 25% = 29% (less than 50 percent).
Oil and coal = 42% + 23% = 75% (more than 50 percent).
Hydropower and oil = 5% + 42% = 49% (less than 50 percent).
Natural gas and coal = 25% + 23% = 48% (less than 50 percent).
Read more on energy here: brainly.com/question/26035031
#SPJ1