1.5 moles of Al₂O₃ is produced from the reaction of 3.0 mol Al with 2.0 mol Fe₂O₃.
What is mole?In chemistry, a mole, also spelled mol, is a standard scientific unit for measuring large amounts of very small entities such as atoms, molecules, or other specified particles.
The mole denotes a massive amount of units, 6.02214076 10²³. Since May 20, 2019, the General Conference on Weights and Measures has defined the mole as this number for the International System of Units (SI).
Previously, the mole was defined as the number of atoms found in 12 grammes of carbon-12 as determined experimentally. In honour of the Italian physicist Amedeo Avogadro, the number of units in a mole is also known as Avogadro's number, or Avogadro's constant (1776–1856).
Learn more about mole
https://brainly.com/question/26416088
#SPJ4
As a result, the answer we have is 1.5 moles of l 203, and this is it. The reaction results in a significant quantity of al2o3.
What are chemical changes exactly?
The conversion of one or more chemicals, known as chemical components, into one or more new compounds, known as byproducts, is referred to as a reaction mechanism. Substances are composed of chemical elements or compounds.
How do chemical reactions happen?
When atoms' chemical bonds are established or ruptured, chemical processes take place. The materials that initiate a chemical reaction are termed as reactants, while the materials created as a result of the reaction are known as products.
To know more about reaction visit:
https://brainly.com/question/28984750
#SPJ4
how can i determine salt base and acid
Answer: You can do this by using ph strips. It should determine which is a salt base and an acid!
Please hurry its urgent
Describe the findings at the Kewalo Basin Marine Mammal Laboratory and discuss what these findings suggest about dolphin intelligence.
Answer:
One of the key findings of the Kewalo Basin Marine Mammal Laboratory is that dolphins have complex social behaviors and are able to form strong bonds with other dolphins. They are able to communicate with each other using a variety of vocalizations and gestures, and they are also able to learn and mimic the behaviors of other dolphins.
Overall, the findings of the Kewalo Basin Marine Mammal Laboratory suggest that dolphins are highly intelligent animals with advanced social and cognitive abilities. These findings highlight the need for further research on dolphin intelligence and the importance of protecting these intelligent and fascinating animals.
What is the relationship between the concentration and the rate of the reaction?
Positive
Negative
Neutral
The relationship between the concentration and the rate of the reaction is positive (option A).
What is rate of reaction?Rate of reaction or reaction rate is the speed at which a chemical reaction takes place, defined as proportional to the increase in the concentration of a product per unit time and to the decrease in the concentration of a reactant per unit time.
According to the collision theory, the rate of reaction increases with the increase in the concentration of the reactants.
The reaction rate is said to be increased when the formation of products is favoured.
In a positive relationship both variables tend to move in the same direction: If one variable increases, the other tends to also increase. If one decreases, the other tends to also.
Therefore, concentration and rate of reaction can be said to be in a positive relationship with one another.
Learn more about rate of reaction at: https://brainly.com/question/8592296
#SPJ1
The electronegativitie of the period-3 element are lited on the tranparency. Calculate the
electronegativity difference for the following pair of bonded period-3 atom. D. Si and Cl _______________________
b. Mg and S_______________________
e. Si and S ________________________
c. Al and P ______________________
The electronegativitie of the period-3 element are lited on the tranparency.. Si and Cl is 0.7, . Mg and S is 1.3, Si and S is 1.7, Al and P is 1.6.
The electronegativity of the atoms that make up the bond determines whether it is nonpolar or polar covalent. An atom's propensity to draw electrons (or electron density) in its direction is measured by its electronegativity. It controls how the shared electrons between the two atoms in a bond are distributed. The more an atom's electronegativity, the more strongly the electrons in its bonds are drawn to it. In a polar covalent bond, electrons are pushed in the direction of the more electronegative atom; as a result, the atom with the partial negative charge is the more electronegative atom. The electron distribution becomes increasingly polarised and the atoms' partial charges increase with increasing electronegativity differences.
Learn more about electronegativity here:
https://brainly.com/question/29810769
#SPJ4
what is the sequence of a peptide based on the following mrna sequence? 5' . . . uuuucuuauugucuu 3'
The sequence of a peptide based on the following mrna sequence, 5' . . . uuuucuuauugucuu 3' is phe-ser-tyr-cys-leu.
'What is peptide sequencing?'
The process of identifying the amino acids that make up a peptide chain's structural sequence is known as peptide sequencing. This knowledge must be made public in order to understand a protein's structure and function in a cell, which is important for biomedical research applications.
The nucleotide sequence of entire genomes or tiny, targeted genomic sections can be determined through sequencing. With the help of Illumina sequencing, a wide range of scientific questions about the genome, transcriptome, or epigenome of any organism can be answered. The preparation of the DNA or RNA samples and the data analysis choices used are the main differences between next-generation sequencing (NGS) approaches.
know more about amino acids here
https://brainly.com/question/14583479#
#SPJ4
2. if 3.45 g of sodium hydroxide is being reacted with 5.23 g of iron (iii) chloride, how many grams of iron (iii) hydroxide would be produced? show all calculations. (8 pts)
If 3.45 g of sodium hydroxide is being reacted with 5.23 g of iron (iii) chloride, grams of iron (iii) hydroxide produced is 3.44 g.
The reaction is given as :
FeCl₃ + 3NaOH ---> Fe(OH)₃ + 3NaCl
mass of NaOH = 3.45 g
mass of FeCl₃ = 5.23 g
moles of NaOH = mass / molar mass
= 3.45 / 40
= 0.086 mol
moles of FeCl₃ = 5.23 / 162
= 0.0322 mol
FeCl₃ is the limiting reactant and depends on the production of the Fe(OH)₃ .
1 mole of FeCl₃ = 1 mole of Fe(OH)₃
0.0322 mol of FeCl₃ = 0.0322 mol of Fe(OH)₃
mass of Fe(OH)₃ = moles × molar mass
= 0.0322 × 107
= 3.44 g
To learn more sodium hydroxide here
https://brainly.com/question/29076435
#SPJ4
Question 4
Write the name and formula of the compound made of magnesium and fluorine.
The compound made of magnesium and fluorine is magnesium fluoride and the chemical formula is MgF₂.
What is a chemical compound?Chemical compound in chemistry is any substance formed by the union of two or more chemical elements in a fixed ratio, the union being a chemical bond.
According to this question, magnesium and fluorine are two chemical elements. When they combine via a chemical bond, the compound formed is termed magnesium fluoride.
Magnesium fluoride is a chemical compound with chemical formula, MgF₂.
Learn more about chemical formula at: https://brainly.com/question/29031056
#SPJ1
you have a solution that is 5.75 wt% licl in water. what mass of solution in grams contains 1.60 g of licl? assume that the density of the solution is 1.00 g/ml.
1.60 g of LiCl is present in a bulk solution of 27.8 grams.
[tex]\frac{1.60 g LiCl * 100 g Sol}{5.75 g Licl} \\[/tex] results in a mass of a solution of 27.8 g.
In order to describe a component in a specific combination or to convey a concentration, one uses the term "mass percent." The mass percentage used to describe the solution composition indicates the mass of solute contained in a given mass of solution. Mass or moles are used to express how much solute is present. The grams of solute per gram of solution is how a solution's mass percent is defined.
To learn more about a solution, refer:-
https://brainly.com/question/15757469
#SPJ4
This data table shows how quickly rope will rot away in freshwater and saltwater. what can you conclude about the rates of the rotting reaction?
A. The reaction occurs more slowly when the concentration of salt is higher.
B. The reaction occurs more quickly when the concentration of salt is higher.
C. The reaction occurs at the same rate, regardless of the concentration salt.
D. There is not enough information to conclude anything about the reaction rates.
The conclusion about the rates of the rotting reaction from the table would be that the reaction occurs more quickly when the concentration of salt is higher—option B.
What is the reaction rate?The rate of reaction, or reaction rate, is the time it takes for a reaction to occur. In other words, it is the time it takes for the reactants of a reaction to become products.
In this case, the reactant is the rope and the product is the rotten product of the rope. From the table, it took 10 years for the rope to decay in a lake. On the other hand, it took the same rope just 4 years to decay in an ocean.
The difference between the two water bodies is the presence of salt. The lake has almost zero salt while the conentration of salt in the ocean water is high.
Thus, the conclusion about the rate of rotting reaction would be that the reaction is hastened by the presence of salt in the ocean water.
More on the rate of reactions can be found here: https://brainly.com/question/8592296
#SPJ1
predict the charges of the monatomic (single-atom) ions formed by these main-group elements.
Magnesium, Aluminum, Strontium, and Nitrogen's monatomic ions have respective charges of +2, +3, +2, and -3.
How are the ions of the magnesium, aluminium, strontium, and nitrogen atoms charged?The valency of the atom is what determines how charged an ion is.
The amount of electrons the atom gained or lost during the process of forming an ion is indicated by the charge on the ion.
The group an element belongs to determines the charge of an ion.
As a result, the monatomic ions of magnesium, aluminium, strontium, and nitrogen have respective charges of +2, +3, +2, and -3.
To learn more about monoatomic ions here:
https://brainly.com/question/18994495#
#SPJ4
Complete Question
Predict the charge on the monatomic ions formed from the following atoms in binary ionic compounds in the following order: Magnesium, Aluminum, Strontium, and Nitrogen.
The name of the compound TiS2
Answer: Titanium disulfide
Explanation:
I remember learning this in class. The TiS2 name is Titanium disulfide. If I am wrong, I am sorry it has been a long time since I learned this.
Answer: titanium disulfide
Explanation:
2. In the reaction NO+NO₂ N₂O3, an experiment finds equilibrium concentrations of [NO] = 3.8 M, [NO₂] = 3.9 M, and [N203] = 1.3 M. What is the equilibrium
constant K K for this reaction?
The equilibrium concentration, Kc for the reaction is: 0.088.
What is equilibrium concentration?A chemical reaction is considered to be in a state of chemical equilibrium when both the reactants and the products are in a concentration that does not change over time anymore. The forward response rate and the backward reaction rate are equal in this condition.
The presence of the chemicals in equal proportions is not a requirement for equilibrium. The fact that both the forward and backward reactions proceed at the same pace indicates that the reaction has progressed to a stage where the concentrations of the reactant and product remain constant throughout time.
Kc= concentration of product divided by concentration of reactant
NO + NO₂ → N₂O₃
or, Kc = N₂O₃ / (No) (NO₂)
or, Kc= ( 1.3 )/{ (3.9) ×(3.8) }
or, Kc=0.088
To know more about equilibrium concentration refer to:
https://brainly.com/question/13414142
#SPJ1
Acid rain occurs in some regions on Earth and has a negative impact on plants and animals. Normal rainwater
has a pH between 5.5 and 6. Which of the following is most likely to be the pH of rainwater that is classified as
acid rain?
O pH above 7
O pH of 7
O pH of 6
O pH below 5
Some parts of the world experience acid rain, which harms both plants and animals. Rainfall with a pH below 5 is referred to as acid rain.
What is acid rain?When chemicals like sulfur dioxide and nitrogen oxide are released into the atmosphere, a chemical reaction occurs that leads to acid rain. These substances have the ability to ascend very far into the sky, where they combine and react with oxygen, water, and other chemicals to produce acid rain, which is a more severe type of ozone pollution.
Is acid rain a good or harmful thing?Acid rain has a negative impact on agriculture, vegetation, and animals. Every nutrient required for plant growth and life is washed away
To learn more about acid rain visit:
https://brainly.com/question/17081835
#SPJ1
arrange the organic compounds from most soluble in water to least soluble in water.
The increasing and decreasing order of solubility in water is C₆H₅NH₂<(C₂H₅)NH<C₂H₅NH₂ .
What is solubility, for instance?A typical illustration of a solution is the addition of sugar cubes to a coffee or tea drink. Solubility is a quality that aids in the dissolution of sugar molecules. Thus, the ability of a material (solute) to dissolves in a certain solvent may be characterized as solubility.
Briefing :They can establish hydrogen bonds with water, the lower alkyl alkenes are soluble in water. However, because the hydrophobic alkyl portion of amines grows larger, their solubility diminishes as their molar mass increases.
Compared to primary amines, secondary alcohols have less hydrogen bonding than primary amines do.
In light of this, secondary amines are less soluble than primary amines.
Due to the greater hydrocarbon constituent, which helps to slow down hydrogen bond formation, aromatic amines are insoluble in water.
To know more about solubility visit :
https://brainly.com/question/28170449
#SPJ4
how long would a constant current of 4.5 amperes to produce 15 g of chromium from chromium iii sulfate solution
A constant current of 4.5 amperes to produce 15 g of chromium from chromium iii sulfate solution is t = 5.15 hours.
Calculation:-
From faraday Law
w---weight= 15g
E ---equivalent wt of Cr(III) =17.33
i----current = 4.5amp
t--- time =?
W = ( E x i x t )/ 96,500
15 = (17.33 x4.5 x t) /96,500
t = 18561.26 sec
t = 309.35min
t = 5.15hours
Chromium is an essential trace element that can improve insulin sensitivity and improve protein carbohydrate and fat metabolism. It is a trace metal element required by humans. In addition to its effects on glucose-insulin and lipids metabolism chromium has been reported to increase lean body mass and decrease body fat percentage which may lead to weight loss in humans.
Learn more about Chromium here:- https://brainly.com/question/18193052
#SPJ4
what is the composition, in atom percent, of an alloy that consists of 4.5 wt% pb and 95.5 wt% sn? the atomic weights for pb and sn are 207.19 g/mol and 118.71 g/mol, respectively
The correct answer is 2.6 at% Pb(lead) and 97.4 at% Sn(Tin). is the composition, in atom percent, of an alloy that consists of 4.5 wt% pb and 95.5 wt% sn
We are given:
4.5 wt % of Pb means that 4.5 grams of lead is present in 100 g of alloy.
95.5 wt % of Sn means that 95.5 grams of tin is present in 100 g of alloy.
To calculate the atom percent of any compound in a mixture, we use the equation:
where,
Avogadro's number = 6.0221408e+23
Moles of a compound is given by the formula:
For Lead:
Given mass of lead = 4.5 g
Molar mass of lead = 207.19 g/mol
For Tin:
Given mass of tin = 95.5 g
Molar mass of tin = 118.71 g/mol
therefore the composition in alloy is 2.6 at% Pb(lead) and 97.4 at% Sn(Tin).
learn more about alloy here:
https://brainly.com/question/716507
#SPJ4
if you weigh out 0.205 g of salicylic acid, what is the theoretical yield for aspirin?
a. 0.157 g
b. 0.267 g
c. 0.134 g
d. 0.0786 g
e. none of the above choice
Theoretically, 0.267 g of aspirin will be produced from 0.205 g of salicylic acid.
given:
the salicylic acid weighs 0.205 g.
the salicylic acid's molar mass is 138.12 g/mol.
the amount of acidic salicylic moles = [tex]\frac{mass}{molar mass}[/tex] = [tex]\frac{0.205}{138.12}[/tex]=0.001484 mol
One mole of aspirin is equivalent to one mole of salicylic acid.
0.001484 mol of the salicylic acid = 0.001484 mol of aspirin
the molar mass of aspirin = 180 g /mol
the mass of aspirin = moles × molar mass
= 0.001484 × 180 = 0.267 g
Thus the theoretical yield = 0.267 g.
To know more about acids click on the link below:
https://brainly.com/question/27915098
#SPJ4
what is the condition produced when a foot is exposed to water or mud that is very cold, but above freezing tempuratures?
Trench foot is the condition produced when a foot is exposed to water or mud that is very cold, but above freezing temperatures.
What is trench foot?Trench foot (sometimes also called immersion foot) is prolonged exposure to moist or wet environments can cause tissue damage in the soles of the feet.
Tissue damage in the trench foot does not cause the foot tissue to freeze, so it is referred to as a non-freezing injury. Trench foot can occur when the soles of the feet are wet and exposed to temperatures of 0°C to 15°C for a long time.
Trench foot is characterized by swelling of the feet, pallor, tingling, numbness, patches on the skin and itching. This happens because in the trench foot there is damage to the nerves, blood flow, muscles, and skin on the soles of the feet. The soles of the feet can also blister or form bubbles filled with water which is very at risk of causing infection.
Trench foot is generally treated by warming the soles of the feet, such as holding them close to a fire or drying them. However, it can cause redness, pain, and sometimes very light sensitivity which can last six to ten weeks.
Learn more about freezing point here: https://brainly.com/question/24314907
#SPJ4
calcium chloride is dissolved in a beaker of water. the beaker feels warm to the touch and the temperature reading of a thermometer in the beaker rises. is this exothermic or endothermic?
when calcium chloride was dissolved in water, the system released heat into the surroundings, the flask, and thus the flask felt hot. This is an example of an exothermic reaction.
calcium chloride chemical processes known as exothermic reactions result in heat production. We described the heat flow q as negative when heat is emitted from the system to its surroundings. Therefore, the H of reaction for exothermic processes is negative. Endothermic chemical reactions are those in which the reactants take in heat energy from the environment to create products. A cooling effect results from these events because they cause calcium chloride their immediate surroundings to become cooler. The local environment warms up as a result of an exothermic process that releases heat. A process known as endothermy removes heat from the environment and cools it.
learn more about Exothermic here:
https://brainly.com/question/4345448
#SPJ4
cis-1,2-Dimethylcyclohexane is achiral, not because there is a plane of symmetry, but because it consists of two enantiomeric conformations which interconvert rapidly via ring flipping at normal temperatures.
This rapid interconversion results in equal concentrations of both enantiomers and thus, no net optical activity. This is known as conformational equilibrium.
What is Dimethylcyclohexane?Dimethylcyclohexane is an organic compound composed of two methyl groups attached to a cyclohexane ring.
Cis-1,2-dimethylcyclohexane is an example of a compound which is optically inactive. This is because it consists of two enantiomers which are mirror images of each other. These two enantiomers have the same physical and chemical properties; however, they are non-superimposable and their spatial arrangements are different. If a single enantiomer is present, it will have a distinct optical activity, but when both enantiomers are present in equal amounts, their net optical activity is zero.
The rapid interconversion of the two enantiomers of cis-1,2-dimethylcyclohexane occurs through a process known as ring flipping. This is when one of the two rings of the molecule flips over and switches its position with the other ring. This process happens so quickly that there is no net optical activity, as the two enantiomers interconvert and cancel each other out.
Cis-1,2-dimethylcyclohexane is important in the field of stereochemistry as it is an example of how two enantiomers can produce an optically inactive compound. This can be a useful tool in the design of chiral compounds; by ensuring that equal concentrations of the two enantiomers are present, an optically inactive compound can be formed.
To know more about dimethylcyclohexane click-
https://brainly.com/question/13423268
#SPJ4
ibuprofen has the following mass percent composition: c 75.69 % , h 8.80 % , o 15.51 % . what is the empirical formula of ibuprofen? express your answer as a chemical formula.
The empirical formula of ibuprofen is C13H18O2.
Solution:
We have a mass of each element as:
C: 75.69 g
H: 8.8 g
O: 15.52 g
Divide by molar mass to get the number of moles of each:
C: 75.69/12.01 = 6.3022
H: 8.8/1.008 = 8.7302
O: 15.52/16.0 = 0.97
Divide by smallest:
C: 6.3022/0.97 = 6.5
H: 8.7302/0.97 = 9
O: 0.97/0.97 = 1
Multiply by 2 to get the simplest whole number ratio:
C : 6.5*2 = 13
H : 9*2 = 18
o : 1*2 = 2
So the empirical formula is C13H18O2.
An empirical formula is the chemical formula of a compound that indicates the proportion of elements present in the compound but does not indicate the actual number or arrangement of atoms. This will be the smallest integer ratio of the elements in the compound.
Learn more about The empirical formula here:- https://brainly.com/question/1603500
#SPJ4
calculate the number of moles of magnesium, chlorine, and oxygen atoms in 2.70 moles of magnesium perchlorate, mg(clo4)2 .
The number of moles of magnesium, chlorine, and oxygen atoms in 2.70 moles of magnesium perchlorate is 2.70, 5.40, 21.60.
The formula of the compound is Mg(ClO4)2.
From the formula, we can see that 1 molecule of Mg(ClO4)2 contains 1 atom of Mg, 2 atoms of Cl and 8 atoms of O.
So 2.70 mol Mg(ClO4)2 contains
1 * 2.70 mol Mg = 2.70 mol Mg
2 * 2.70 mol Cl = 5.40 mol Cl
8 * 2.70 mol O = 21.60 mol O
So, the required answer is 2.70, 5.40, 21.60.
Therefore, the number of moles of magnesium, chlorine, and oxygen atoms in 2.70 moles of magnesium perchlorate is 2.70, 5.40, 21.60.
To learn more about number of moles from the given link.
https://brainly.com/question/15356425
#SPJ4
write the chemical equation that describes the reaction of room temperature titanium tetrachloride with water vapor to produce a titanium dioxide smokescreen. include phases.
To shed light on the process by which titanium dioxide (TiO2) nanoparticles are formed, titanium tetrachloride (TiCl4) hydrolysis has been investigated.
What takes place when TiCl4 is dissolved in water?Hydrogen chloride (HCl) gas, which is extremely caustic and hazardous, is known to be released violently when TiCl4 reacts with water. The estimate of the scope and gravity of the effects of large accidents that have been identified, such as an unintentional spill of TiCl4, is, however, not shared by the industry.
Why is room temperature titanium chloride liquid?An alternative strategy (which is the opposite of the solution above) would be to assert that since metal chlorides are often ionic, titanium chloride must be a tiny (covalent) molecule with weak molecular interactions if it is a liquid at room temperature.
to know more about titanium dioxide here:
brainly.com/question/16978406
#SPJ4
FILL IN THE BLANK. the most likely reason for colloidal dispersion is ________________.
The most likely reason for colloidal dispersion is electrostatic repulsion.
When two charged particles, whether positively or negatively, approach one another, they repel one another. Electrostatic repulsion is the term used in the case.
The interaction of the electrical double layers around the particles or droplet causes electrostatic repulsion. Repulsion happens when charged colloidal particles in a dispersion become close to one another and the double layers start to overlap (the particle separation is now less than twice the double-layer extension). Since there isn't enough room for complete potential decay, the individual double layers can no longer evolve without restriction.
know more about colloidal particles here
https://brainly.com/question/11640006#
#SPJ4
consider the titration of 100.0 ml of 0.016 m hocl (ka=3.5×10−8) with 0.0400 m naoh.
40.0 mL NaOH required to reach equivalent point.
Milli moles of HOCl = 100 x 0.016 = 1.6
We need 1.6 milli moles of NaOH
1.6 = V x 0.04
V = 1.6 / 0.04 40 mL
Titration is a common laboratory method of quantitative chemical analysis to determine the concentration of identified analytes. Reagents, called titrants or titrators, are prepared as standard solutions of known concentration and volume. The purpose of titration is to establish the equivalence point, the point at which chemically equal amounts of the reactants are mixed.
The indicator used depends on the nature of the reaction. For example: Phenolphthalein or methyl orange can be used for acid and base titrations. The indicator marks the end point by changing color at the end point. One of the reactants may itself act as an indicator.
The equivalence point, or stoichiometric point, of a chemical reaction is the point at which chemically equal amounts of reactants are mixed. In an acid-base reaction, the equivalence point is where a mole of acid and a mole of base neutralize each other according to a chemical reaction.
To learn more about titration, here
https://brainly.com/question/2728613
#SPJ4
Good luck on your finals!
do you think the specific concentrations that you were made were adequate to determine the concentration in question 2? why do you think is it necessary to spread the points out over the entire range
The quantity of solute in a given amount of solution is referred to as a solution's concentration, and a suitable concentration must be maintained to regulate reaction activity.
When researching chemical processes, a solute's concentration is crucial because it affects how frequently molecules collide in solution, concentration which indirectly affects the speeds of reactions and the conditions at equilibrium. One of three methods can be used to calculate the concentration percentage: (1) dividing the solute's mass by the solution's mass; (2) dividing the solute's volume by the solution; or (3) dividing the solute's mass by the solution's volume.
learn more about concentrations here:
https://brainly.com/question/26255204
#SPJ4
nitrogen monoxide and oxygen react to form nitrogen dioxide. if 5.6 moles of no react with 3.1 moles of o 2, how many moles of the reactant in excess will remain after the reaction? (assume 100% yield.)
0.3 moles of Oxygen is excess reactant (reagent) when yield is 100% .
NO =5.6 moles
O2= 3.1 moles
2NO + O2 --> 2NO2 the chemical reaction.
the ratio of NO and O2 is 2:1
therefore for 5.6 moles of NO, 2.8 moles of Oxygen(O2) is required. So 3.1moles - 2.8 moles = 0.3 moles
The reactant in a chemical reaction that is present in a quantity that is larger than what is required to fully react with the limiting yield is known as the excess reactant. The substance(s) still present after a chemical reaction has reached equilibrium in yield are the reactant(s). Subtract the mass of excess reagent eaten from the total mass of excess reagent provided to determine the quantity of yield that is still present. Reactants in a chemical reaction are referred to as excess reagents if they are still present after the reaction is complete.
learn more about yield here:
https://brainly.com/question/25996347
#SPJ4
to change a temputure from celcius to farenheit you ultiply the celciues tep by 9/5 and add 32 to the product if the temp is 40 what is the farenheit temp?
Answer:
Explanation:
104
Ill in the blank with the correct number to balance the equation: ___KClO3 → 2KCl 3O2. (Enter only a whole number. )
Numerical Anwer Expected!
Anwer for Blank 1:
Correct number to balance the equation: ___KClO3 → 2KCl 3O2 is "2".
We obtain KCl and oxygen gas from the breakdown of potassium chlorate (KClO3).
1.5 moles of O2 gas and one mole of KCl are produced from one mole of KClO3.
Therefore, the response will be:
KCL)3 - - > KCL + 3/2 O2
The entire equation will be multiplied by two in order to transform the fractional coefficient to a whole number.
2X [ KCLO3 - - > KCL + 3/2 O2 ]
A balanced equation will therefore be:
2KCLO3 - - > 2KCL + 3 O2
KClO3's coefficient is therefore "2".
To learn more about Equation Please click on the given link:
https://brainly.com/question/11904811
#SPJ4