Water is a polar solvent and hexane ( (C 6H 14) s a nonpolar solvent. Which of the following correctly describes the solubility of the solute? o octane (nonpolar), soluble in water O Cacl2, soluble in hexane O CCl4 (nonpolar), soluble in water O mineral oil (nonpolar), soluble in water O NaHCO3, soluble in water

The linear combination of 2p1 and 2p2 functions can be used to generate the hydrogenic 2px and 2py orbitals.

Orbitals are regions of space that describe the probable location of an electron around an atom's nucleus. They are usually shown as a cloud-like region and are divided into sub-regions called s, p, d, and f orbitals. Each orbital has a specific energy level and a specific shape. The orbitals determine the properties of the atom and its chemical behavior. Electrons in different orbitals interact in different ways, and this determines the type of bonds that form between atoms.

This is done by adding and subtracting the two functions and then normalizing the resultant wave functions. This gives the following expressions:

2px = (1/√2)(2p1 + 2p2)

2py = (1/√2)(2p1 - 2p2)

The hydrogenic 2pz orbital is simply equal to the 2p0 function, since the z-axis is the axis of highest symmetry.

Thus, 2pz = 2p0.

To know more about orbitals click-

https://brainly.com/question/20319149

#SPJ4

One mole of aluminum and one mole of manganese oxide are placed in a reaction vessel, the correct option is  a.) 1.0 mole of Mn will be produced.

The reaction is given as follows :

2Al + 3MnO  --->   Al₂O₃  +   3Mn

if One mole of aluminum react with one mole of manganese oxide  then,

moles of Al = 0.5 mol

moles of MnO = 0.33

here it is clear that Mn is the limiting reagent, therefore formation of the product is depends on the ,MnO.

the moles MnO = moles of Mn

thus ,  1.0 mole of Mn will be produced by 1 mole of the MnO.

To learn more about moles here

https://brainly.com/question/9584025

#SPJ4

Answer:

manganese dioxide, is a solid chemical compound that is typically not able to conduct electricity when it is in its solid form. This is because the structure of solid manganese dioxide is made up of a network of strong covalent bonds between the manganese and oxygen atoms. These covalent bonds are very stable and do not allow electrons to flow freely through the compound, which is necessary for the conduction of electricity.

However, when manganese dioxide is melted or dissolved in a solvent, the covalent bonds are broken and the electrons become more mobile. This allows the electrons to flow more freely through the compound, enabling it to conduct electricity.

In summary, manganese (IV) oxide is not able to conduct electricity in its solid form due to the strong covalent bonds between its atoms, which do not allow electrons to flow freely. However, when it is in its molten or solution form, the covalent bonds are broken and the electrons become more mobile, allowing the compound to conduct electricity.

The balanced net ionic equation for the formation of the precipitate is Ag⁺(aq) + cl⁻ --> Agcl(s)

Given ,   Nacl(aq) + AgNO₃(aq )  --> ?

since,

   Nacl(aq) + cl⁻(aq) + Ag⁺(aq) + NO₃⁻(aq) --> Na⁺(aq)+NO₃⁻(aq)+ Agcl(s)

Net ionic equation is , Ag⁺(aq) + cl⁻ --> Agcl(s) .

Ionic equations are chemical equations in which electrolytes in aqueous solution are described as dissociated ions.

Example: 1) Sodium chloride(aq) + Silver nitrate(aq) → Silver chloride(s) + Sodium nitrate(aq) >>Ag+(aq) + Cl-(aq) → AgCl(s) 2) Sodium(s) + Hydrochloric acid (aq) -> sodium chloride (aq) + hydrogen (g)

Learn more about  ionic equation here : https://brainly.com/question/13879496

#SPJ4

Minimum daytime temperature typically occurs at sunrise, the time of maximum outgoing earth energy.

The minimum temperature occurs in the early morning whereas maximum temperature of the day occurs in the afternoon.

The lowest temperature is recorded diurnally, monthly, seasonally, or annually. Daily air temperature minima is recorded by screen minimum thermometer.

Mean minimum temperature is the long-term average daily minimum air temperature observed during a month and over the year. Lowest temperature (°C) is the lowest recorded temperature observed at the site.

Frigid zone receives less amount of sun rays therefore the temperature in this zone is very low and the climate is usually very cold.

To know more about minimum daytime temperature, refer

https://brainly.com/question/1447361

#SPJ4

Amino acid addition to a growing chain happens at the C terminal and ATP is required.

Proteins are made up of substances called amino acids. Proteins and amino acids are the components of life. Amino acids are the byproducts of the digestion or breakdown of proteins. Amino acids are used by the human body to create proteins that benefit the organism. Two ATP molecules are needed for amino acid activation, two more for peptide bond formation and ribosome translation, as well as an additional ATP molecule or so for error correction and the synthesis of sequences that are lost during protein maturation, in order to add an amino acid to a growing peptide chain.

Want to know more about amino acids visit the link which is given below;

https://brainly.com/question/14583479

#SPJ4

Answer:

Therefore, H2O is being reduced, while CO is being oxidized.

Explanation:

In a chemical reaction, a species that gains electrons is being reduced, while a species that loses electrons is being oxidized.In the reaction given, H2O is gaining electrons, while CO is losing electrons.

Mass of the pure silver deposited on a metal object made into the cathode of the cell is calculated to be 0.0217 gm.

The process of using electrodeposition to coat an object in a layer of metal is called electroplating .

As we know that, Q = I * t

=0.270 * 72

= 19.44 C

Here Q is quantity of electricity , I is current in amperes = 0.270 A (given)

t is time in seconds (72.0 sec)

As 96500 Coulomb of electricity electrolyzes 1 mole of Ag

then,19.44 C of electricity deposits,

=1/96500 * 19.44

= 0.000201 moles of Ag

Mass of Ag is = number of moles * molar mass

= 0.000201 * 108

= 0.0217 gm

Thus, mass of pure silver deposited on a metal object made into the cathode of the cell is  0.0217 gm.

To know more about electroplating, refer

https://brainly.com/question/16266707

#SPJ4

If 6 M HCl is substituted for the 3 M HCl in a procedure, the concentration of the acid will be doubled.

This could have several consequences, depending on the specific procedure. In general, doubling the concentration of the acid will increase the rate of any reaction that involves the acid, so the reaction could proceed more quickly or with greater intensity than it would with the 3 M HCl.

In addition, the increased concentration of HCl could cause the reaction to become more acidic, so other components of the reaction may be affected as well. Finally, the increased concentration of HCl could increase the risk of hazards, such as burns, if proper safety precautions are not taken.

For more questions like HCL click the link below:

https://brainly.com/question/29847167

#SPJ4

True. The presumptive definition of Driving Under the Influence in Florida is having a Blood Alcohol Content (BAC) of .08.

True. In Florida, it is illegal to operate a motor vehicle with a blood alcohol content (BAC) of .08 or higher. This is known as driving under the influence (DUI). The legal limit for DUI in Florida is .08.

If a driver is found to have a BAC of .08 or higher, they can be arrested for DUI. Florida also has a Zero Tolerance Law for drivers under 21, meaning that any BAC .02 or higher can lead to an arrest for DUI.

For more questions like DUI click the link below:

https://brainly.com/question/29771200

#SPJ4

Complete question:

The presumptive definition of Driving Under the Influence in Florida is having a Blood Alcohol Content (BAC) of .08. true or false

The reaction that treated with KOH in ethanol is explained by the E2 Elimination.

Compound has the molecular formula C9H19Cl and when treated with KOH, ethanol is obtained. haloalkanes that on reaction with a base form an alkene as the major product 2-chloro-2,6-dimethylheptane and 3-bromo-2,6-dimethylheptane respectively. On reaction with base, both the compounds form 2,6-dimethylhept-2-ene as major product via E2-elimination. This major product is decided by Zaitsev's rule. The alkene reacts with one mole H2 to form 2,6-dimethylheptane via addition reaction. Reaction with HCl occurs via Markovnikov addition, chlorine group is added to second carbon and 2-chloro-2,6-dimethylheptane is formed again. Therefore,  2-chloro-2,6-dimethyheptane and  3-bromo-2,6-dimethylheptane.

To learn more about E2 Elimination please visit:

https://brainly.com/question/18510324

#SPJ4

The temperature at which the gas could have zero volume is called absolute zero. It is a hypothetical condition where all the curves meet at a point at V= 0 and T becomes -273.15°C.

The plot of the volume of a sample of gas versus temperature at three different pressures is a graphical representation of the ideal gas law.

As the temperature of the gas sample increases, the pressure increases, and the volume of the gas sample increases as well.

However, the rate at which the volume of the gas sample increases is different at the three different pressures. At higher pressures, the volume increases more quickly than at lower pressures, indicating that the gas sample is more compressible at higher pressures.

This can be seen in the plot as the curves for the three different pressures diverge. Additionally, the plot also shows that the volume of the gas sample increases more quickly at higher temperatures.

This is because the kinetic energy of the gas molecules increases with temperature, allowing them to move more freely, thus increasing the volume of the gas sample.

To know more about ideal gas law, click here:

https://brainly.com/question/27870704

#SPJ4

The daughter of the parent isotope, which is the end result of a radioactive decay process, may be unstable in which case it will also degrade. Up till a stable nuclide has been produced, the process goes on.

Nuclear reactions are collisions between two nuclei or between a nucleus and an outside subatomic particle that result in the creation of one or more new nuclides in nuclear physics and nuclear chemistry. Consequently, at least one nuclide must change throughout a nuclear reaction.

Ionizing radiation is released as a result of radioactive decay. Among the ionising radiation that is released are alpha, beta, and/or gamma rays. Unbalanced atoms known as radionuclides are the site of radioactive decay. The release of energy in the form of ionising radiation occurs during radioactive decay. Alpha particles, beta particles, and/or gamma rays are all examples of the ionising radiation that is released.

LEARN MORE ABOUT nuclear reactions HERE

https://brainly.com/question/25387647

#SPJ4

22.704 grams of CO2 are produced by burning 7.49 g of C4H10

This can be calculated as :

The basic reaction is: C4H10 + O2 = CO2 + H2O

We have 4 carbons for each reactant molecule, and this reacts with oxygen to form carbon dioxide and water.  We, therefore, need to show 4 CO2 molecules to consume these 4 carbons.

Next, let's balance the H atoms.  The 10 H atoms from the C4H10 must find a home in the water molecules.  5 water molecules can be made from 10 hydrogen atoms.

The only atom left is oxygen.  So far, the product side contains 13 O atoms (8 from the CO2 and 5 from the H2O).  Awkward, since oxygen only comes in pairs, an even number.  Let's use a fraction, 6.5, for the O2 for now, just to get it balanced:

This equation is balanced, but not legal since we can't have 1/2 of an O2 molecule.  So simply multiply all coefficients by 2:

The equation is now properly balanced.  It is telling us that we'll get 8 moles of CO2 for every 2 moles of C4H10.  That's a molar ratio of 4CO2/1 C4H8.

Let's find the moles of C4H8.  Divide the grams of C4H8 by its molar mass (58.04g/mole).

Now multiply moles C4H8 by the molar ratio we calculated above:

Convert to grams CO2 by multiplying by CO2's molar mass:

To learn more about the properties of butane:

https://brainly.com/question/14704834

The statement that is true regarding the solution prepared by adding 0.10 mol of potassium acetate to 1.00 L of water is that it is acidic (option B).

pH refers to the measure of the acidity or alkalinity of a solution. It can be calculated by using the following expression:

pH = - log {H}

Where;

The concentration of the acetate solution must first be calculated by dividing the number of moles by its volume as follows:

Molarity = no of moles ÷ volume

Molarity = 0.10 mol ÷ 1L = 0.1M

pH = - log {0.1}

pH = 1

1 indicates that the solution is acidic, hence, option B is correct.

Learn more about pH at: https://brainly.com/question/14116906

#SPJ1

When a physical change in a sample occurs, composition of sample does not change.

Physical changes are defined as changes which affect only the form of a substance but not it's chemical composition. They are used to separate mixtures in to chemical components but cannot be used to separate compounds to simpler compounds.

Physical changes are always reversible using physical means and involve a change in the physical properties.Examples of physical changes include melting,boiling , change in texture, size,color,volume and density.Magnetism, crystallization, formation of alloys are all reversible and hence physical changes.

They involve only rearrangement of atoms and are often characterized to be changes which are reversible.

Learn more about physical changes,here:

https://brainly.com/question/17931044

#SPJ1

Answer:

a) combustion reaction

balanced equation: 2C4H10 + 13O2 → 8CO2 + 10H2O

b) synthesis reaction

balance equation: 6Li + N2 → 2Li3N

c) double replacement

balanced equation: 2AgNO3 + Na2CrO4 → 2NaNO3 + Ag2CrO4

d) decomposition

balanced equation: 2MgO → 2Mg + O2

e) double dispalcement

balanced equation: HI + KOH → KI + H2O

f)  single displacement

2AlPO4 + 3Mg → 2Al + Mg3(PO4)2

Explanation (detailed):

a)

Word Equation: Butane + Dioxygen = Carbon Dioxide + Water

How to balance:

1- Label Each Compound With a Variable

Label each compound (reactant or product) in the equation with a variable representing the unknown coefficients.

aC4H10 + bO2 = cCO2 + dH2O

2- Create a System of Equations

Create an equation for each element (C, H, O) where each term represents the number of atoms of the element in each reactant or product.

C: 4a + 0b = 1c + 0d

H: 10a + 0b = 0c + 2d

O: 0a + 2b = 2c + 1d

3-Solve For All Variables

Use substitution, gauss elimination, or a calculator to solve for each variable.

(keep doing this for every equation)

if you have any questions feel free to ask ill be happy to answer

industrial non-metallic mineral resources do not include Diamond

Non-Metallic is Metallic minerals are minerals that contain metal elements in their natural state. Metal substances are not found in non-metallic minerals. A new product is formed when metallic minerals are melted. In the case of non-metallic minerals, such a process yields no new product. Nonmetallic minerals are a category of chemical components that, once melted, yield no new products. Soil, small stones, limestone, terra cotta, and marble are instances of nonmetallic minerals. Non-metallic minerals are composed of chemical elements that lack the properties of a metal.

Learn more about Diamond here:

https://brainly.com/question/7074677

#SPJ4

In this retro synthesis the following two reactant would be involved. [SEE in attachement]

A reaction in which a β-hydroxy carbonyl compound decomposes into an aldehyde or ketone, plus another carbonyl compound. The formal reverse of the aldol reaction.

The stage of an aldol condensation known as dehydration is also reversible in the presence of acid and base catalysts. Therefore, many, -unsaturated carbonyl compounds break into smaller aldehydes or ketones when heated with aqueous solutions of strong acids or bases; this reaction is known as the retro-aldehyde reaction. The aldol reaction is reversible in the presence of acid or base catalysts, and the beta-hydroxy carbonyl products may transform back into the initial aldehyde or ketone reactants. These aldol products are fully stable and isolable chemicals in the absence of such catalysts.

To learn more about catalysts visit:https://brainly.com/question/28813725

#SPJ4

The given pairs of compounds are the stereoisomers and in it they are  enantiomers.

A chemical molecule's atoms can be organized in a variety of ways. Isomerism is the name given to this phenomenon. Isomers are molecules with the same chemical formula but distinct atom configurations.

The nomenclature system used to identify enantiomers is called the R-S system. According to the Cahn-Ingold-Prelog priority rule scheme, which assigns a priority to each of the chiral center's substituents, this method labels the chiral center R or S. On the basis of atomic mass, the priority is determined. Stereoisomers make up the given pair of molecules.

The given pair of compounds are the  R and S enantiomers.

To know more about stereoisomers, please refer:

https://brainly.com/question/17366745

#SPJ4

Pull the glove inside out as you peel it away from your body. Peel one glove away from your body and grab it by the wrist on the outside. Avoid touching your exposed skin.

Describe chemicals.

Any material with a known composition is a chemical.

How to take off your gloves:

Grab one glove's palm just above your wrist. Turning the glove inside out, carefully remove it.

Hold the glove in the palm of the hand that is still wearing gloves.

The glove must be pulled off from the inside out.

After taking off your gloves and before handling any surfaces or items, always wash your hands.

To know more about chemicals click on the link below:

https://brainly.com/question/13145357

#SPJ4

Giant stars' hydrogen reserves are almost depleted. High-mass stars are defined as having a mass of at least 8 times that of the Sun. These stars are of type O and B, and as we already observed, they only exist for a brief period of time on the Main Sequence, on the order of 10 million years.

Nevertheless, they go through very similar life phases to the low mass stars. Remember that these phases for low mass stars are: hydrogen burning in the core during the Main Sequence; when the hydrogen in the core is spent; the star starts hydrogen burning in a shell around the degenerate helium core; and the star moves up the Red Giant Branch.Extreme pressure increases the temperature to 100 million degrees, where helium burning is feasible, when the hydrogen fuel runs out. As the helium in the core is exhausted, the star starts burning helium in a shell around an inert carbon core while moving back up the H-R diagram to become a Red Supergiant. Suddenly, at the helium flash, the degenerate core starts burning helium and the star moves toward (but not quite to) the Main Sequence again.

To know more about hydrogen please click on the link brainly.com/question/11837837

#SPJ4

true,a multifaceted synthetic route to functional polyacrylates by trans-esterification of poly(pentafluorophenyl acrylates).

polyacrylate, any of a class of synthetic resins derived from the polymerization of acrylic esters. Polyacrylates are used primarily in paints and other surface coatings, adhesives, and textiles because they can be formed into plastic materials with notable clarity and flexibility using certain methods. They are strong and flexible, allowing for the creation of solid products with a supple texture. It is a large compound that cannot pass through the skin's barrier and has been shown to be safe for cosmetic use. Polyacrylate, also known as Acrylate polymers, is a type of polymer that is commonly referred to as a plastic. Transesterification is the process of exchanging the organic group R′′ of an ester with the organic group R' of an alcohol in organic chemistry. The addition of an acid or base catalyst frequently catalyses these reactions. Other enzymes, particularly lipases, can also be used to carry out the reaction.

Learn more about polyacrylate here:

https://brainly.com/question/16038578

#SPJ4

Answer:

In order for a horse to be a (WATER)(GAIT), it must have two (WATER) alleles and two (GAIT) alleles. Both Halter-Man and Erlich-Mane have one (WATER) allele and one (GAIT) allele, so there is a chance that they could produce a (WATER)(GAIT) foal. However, without more information about the genotypes of Halter-Man, Erlich-Mane, and Erlich-Mane's parents, it is not possible to determine the exact chances of them producing a (WATER)(GAIT) foal.

Draw the organic by product(s) of the subsequent reactions, taking stereochemistry into account as necessary. The formula for H2 lindlar catalyst is:

Lindlar catalyst for CH3-C-CH2-CH2-CH3 + H2 - CH2 - CH2 - CH2 - CH3

| |

H H

The bond is hydrogenated into double bonds using the lindlar catalyst. Alkynes that include triple bonds are converted into alkenes that contain double bonds using the H2 + lindlar catalyst. Alkenes do not react with the H2 + lindlar catalyst. The following is a description of the H2 + lindlar catalyst reaction:

Using the Lindlar catalyst, the reaction goes from CH3-C to C-CH2-CH2- CH3 and then to CH3-C=C-CH2-CH2- CH3 and then to hexyne.

                                      H H  

(2) Hexene

To know more about H2 lindlar visit:-

https://brainly.com/question/14464125

#SPJ4

Answer:

7.31 x 10⁵ kJ

Explanation:

To find the energy gained by the iron sample, you need to use the following equation:

Q = mcΔT

In this equation,

-----> Q = energy (J)

-----> m = mass (g)

-----> c = specific heat capacity (J/g°C)

-----> ΔT = T₂ - T₁ = change in temperature (°C)

T₂ represents the final temperature and T₁ represents the initial temperature. After you calculate the value of "Q", you need to convert the energy from joules (J) to kilojoules (kJ).

Q = ? J                                  c = 0.387 J/g°C

m = 24.6 g                         ΔT = 99.8°C - 23.0°C = 76.8°C

Q = mcΔT                                                     <----- Equation

Q = (24.6 g)(0.387 J/g°C)(76.8°)                  <----- Insert values

Q = 731 J                                                       <----- Multiply

1,000 J = 1 kJ

   731 J                  1 kJ
--------------  x  -------------------  =  7.31 x 10⁵ kJ
                          1,000 J

Krebs cycle is a visual organizer that shows the components, locations, and sites for each of the main phases of cellular respiration.

The second crucial stage of oxidative phosphorylation is the Krebs Cycle, often known as the citric acid cycle. The Krebs cycle converts the energy from the smaller, 3-carbon glucose molecules produced by glycolysis into electron carriers, which are then utilised in the electron transport chain to create ATP. The majority of living things utilize glucose as their main fuel source, but they first have to break it down and store the energy in ATP and other molecules. The mitochondria contain the Krebs cycle. The Krebs cycle's processes contribute electrons and protons to a variety of electron carriers inside the mitochondrial matrix.

To know more about  molecules please click on the link brainly.com/question/28238455

#SPJ4

There can be release of radiations like gamma radiation. There can be emission of particles too like alpha particle. Therefore, the given nuclear decay reaction is balanced.

It is process in which the radioactive element releases particles or radiations. Alpha particles is ⁴₂He. Alpha particle is nothing but helium particle.

So, according to our questions Uranium-238 is undergoing alpha emission. The balanced reaction can be written as

²³⁸U₉₂ ²³⁴ [tex]\rightarrow[/tex]Th₉₀+⁴₂He

So, From above reaction we can see that the total mass on reactant side is equal to total mass on product side. So, this reaction is balanced.

Therefore, the given nuclear decay reaction is balanced.

To know more about nuclear decay, here:

brainly.com/question/21114779

#SPJ1

Starting with solid 3-sulfolene and then breaking it down was simpler than doing it with gaseous 1,3-butadiene. Maleic anhydride, a dienophile, reacts with the diene to produce 4-cyclohexene-cis-dicarboxylic anhydride.

A cyclic organic compound with a sulfone functional group is known as sulfolene or butadiene sulfone. It is a crystalline, odorless, white solid that can be stored forever and dissolves in various organic solvents as well as water. The substance is utilized as a butadiene source.

Sulfolane is a common industrial solvent that is used for cleaning natural gas and extracting aromatic hydrocarbons from hydrocarbon mixtures.

Sulfolane, a dipolar aprotic sulfone solvent, is comparable in physicochemical qualities to other dipolar aprotic solvents as DMSO, NMP, DMF, and DMAC. Sulfolane (anhydrous) has the highest freezing point and highest boiling point among the solvents in Table 1 at 28.4 °C.

Thus, solid 3-sulfolene and then breaking it down was simpler than doing it with gaseous 1,3-butadiene.

To learn more about sulfolene, follow the link;

https://brainly.com/question/29854277

#SPJ1

Among Acetone, butane, and propanol except for butane, the other two compounds possess polar bonds.  

Polar bonds are when one end of a molecule has a positive charge and the other end has a negative charge. Butane has no polar bonds because its atoms have the same electronegativity.

Acetone has a polar bond because the oxygen atom has a higher electronegativity than the carbon and hydrogen atoms, creating a charge difference between them.              

Propanol has two polar bonds. The oxygen atom has a higher electronegativity than the hydrogen and carbon atoms, creating a charge difference between them.

Additionally, the hydrogen atoms are slightly more electronegative than the carbon atom, creating a second charge difference within the molecule. This charge difference is what makes the polar bonds in propanol.

The image attached explains the polar bonds in each compound

To know more about electronegativity, click below:

https://brainly.com/question/18258838

#SPJ4