The table should be included, but that's okay
hcl naoh: salt neutral (both strong)
hcl nh4oh: salt acidic(strong acid+weak base)
ch3cooh koh: salt basic(weak acid+strong base)
Which describes interactions between substances and stomata during photosynthesis? Check all that apply.
Oxygen enters stomata.
Oxygen is released through stomata.
Carbon dioxide enters stomata.
Carbon dioxide is released through stomata.
Hydrogen enters stomata.
Hydrogen is released through stomata.
During photosynthesis, Oxygen is released through stomata and Carbon dioxide enters stomata.
What is photosynthesis?Photosynthesis is defined as the process by which green plants use sunlight, water, and carbon dioxide to manufacture their own food in the form of sugar.
The stomata is a pore found on the leaves stem and roots which controls the movement of molecules in and out of the plant.
During photosynthesis, Oxygen is released through stomata and Carbon dioxide enters stomata.
Learn more about photosynthesis here:
https://brainly.com/question/19160081
#SPJ1
Answer:
The answer is B, and C
Explanation:
the fastest train on earth, the TGV in france, can travel 800 miles in 2.5. what is the speed?
Answer:
s= 3.20 mph
Explanation:
s=t/d
s=380miles/5hours
Which one of the following molecules can form hydrogen bonding?
Answer:
it is a
Explanation:
i hope this helps you
the planet saturn rotates much more rapidly than earth. this would affect the length of saturn's...
The planet Saturn rotates much more rapidly than earth, this would affect the length of Saturn's day and night.
How day and night occur?Day and night occur on any planet due to the rotation of the planet in its own axis with respect to the position of the sun.
As speed of planet Saturn is much more as compared to the speed of planet Earth. So occurring of day and night in the Saturn takes place faster as compared to earth.
Hence, length of day and night is get affected due to the fast movement.
To know kore about rotation of earth, visit the below link:
https://brainly.com/question/20797098
#SPJ1
The diagram depicts the flow of
water through a dam. The flow
of water causes the turbine
blades to turn. This, in turn,
causes : generator to provide
energy to the power lines.
Which of the flowcharts best
outlines the conversion of
energy
A) chemical energy to kinetic
energy to electrical energy
B) Solar energy to mechanical
energy to electrical energy
C) kinetic energy to mechanical
energy to electrical energy
D) mechanical energy to
electrical energy to kinetic
energy
In IR spectroscopy, a primary amine will produce two signal(s) above 3300 cm-1, because the amino group ________________________.
A primary amine will produce two signal(s) above 3300 [tex]cm^1[/tex], because the amino group has two possible modes of stretching (symmetric and asymmetric)
What is IR?Infrared radiation (IR), sometimes referred to simply as infrared, is a region of the electromagnetic radiation spectrum where wavelengths range from about 700 nanometers (nm) to 1 millimeter (mm).
The N-H stretches of amines are in the region 3300[tex]cm^1[/tex].
These bands are weaker and sharper than those of the alcohol O-H stretches which appear in the same region.
In primary amines ([tex]RNH_2[/tex]), there two bands in this region, the asymmetrical N-H stretch and the symmetrical N-H stretch.
Hence, In IR spectroscopy a primary amine will produce two signal(s) above 3300 cm-1, because the amino group has two possible modes of stretching (symmetric and asymmetric).
Learn more about the IR here:
https://brainly.com/question/20630644
#SPJ1
identify two ways recycling can reduce energy use?
Calculate the heat absorbed when 31.6 g of ice at 0°C is completely melted
Latent heat of fusion for ice is 33600J/k
Mass=31.6J/kHeat absorbed
k_f×m31.6×336001061,740mJ1061JWhat is the molality of a solution in which 13.7 grams of nacl have been dissolved in 500 grams of water?
Answer: 0.5 M
Explanation:
molarity = (moles of solute)/(liters of solution)
To find liters of solution, we can convert the 500 grams of water to liters, which is 0.5 L.The formula mass of NaCl is about 58.44 g/mol, so 13.7 grams is about 13.7/58.44 = 0.234 mol.Hence, the molarity is (0.234)/(0.5) = 0.5 M (to 1 s.f.)
A. Match the term with its definition. (1 point)
A. Frequency
B. Wavelength
C. Velocity
_____ The direction and speed at which a wave is traveling
_____ The distance between two adjacent wave peaks
_____ The number of waves passing a point in 1 second
B. What is the equation that illustrates the relationship between wave velocity, frequency, and wavelength? (1 point)
Taking into account the definition of wavelength, frecuency and propagation speed:
Frequency: The number of waves passing a point in 1 second.Wavelength: The distance between two adjacent wave peaks.Velocity: The direction and speed at which a wave is traveling.The equation that illustrates the relationship between wave velocity, frequency, and wavelength is v = f×λ.
WavelengthWavelength is the minimum distance between two successive points on the wave that are in the same state of vibration. It is expressed in units of length (m).
FrequencyOn the other side, frequency is the number of vibrations that occur in a unit of time. Its unit is s⁻¹ or hertz (Hz).
Propagation speed or velocityFinally, the propagation speed is the speed with which the wave propagates in the medium, that is, it is the magnitude that measures the speed at which the wave disturbance propagates along its displacement.
The propagation speed relate the wavelength (λ) and the frequency (f) inversely proportional using the following equation:
v = f×λ
All electromagnetic waves propagate in a vacuum at a constant speed of 2,998 x 10⁸ m / s, the speed of light.
Therefore, the previous expression establishes an inversely proportional relationship between the frequency and the wavelength: The higher the frequency, the lower the wavelength and when the frequency is lower, the greater the wavelength.
SummaryIn summary, the definition of frequency, wavelength and velocity are:
Frequency: The number of waves passing a point in 1 second.Wavelength: The distance between two adjacent wave peaks.Velocity: The direction and speed at which a wave is traveling.Finally, the equation that illustrates the relationship between wave velocity, frequency, and wavelength is v = f×λ.
Learn more about wavelength, frecuency and propagation speed:
brainly.com/question/2232652?referrer=searchResults
brainly.com/question/7321084?referrer=searchResults
brainly.com/question/14946166?referrer=searchResults
#SPJ1
Name these compounds according to IUPAC.
Functional groups are alcohol, carboxylic acids, ester, ketone, etc. The compounds are 2,2 dimethyl propane, 2-methyl butane, and ethanol.
What are functional groups?Functional groups provide specific chemical properties that are linked to the main chain of the compound and define the role of the compound. The first compound has two methyl (CH₃) groups at the second carbon and a total of three carbons making the compound, 2,2 dimethyl propane.
In the second compound, there is a methyl group on the second carbon and total of four carbons making it 2-methyl butane, and the third compound is two carbon with alcohol as the functional group making it ethanol.
Therefore, the compounds are 2,2 dimethyl propane, 2-methyl butane, and ethanol.
Learn more about functional groups here:
https://brainly.com/question/12150493
#SPJ1
- What mass of sulfur trioxide is formed and what is the limiting reactant? Please show all of your calculations so I can understand, please and thank you?
https://brainly.com/question/11158730
I answered all of the previous questions, but I'm not sure I understand questions 4 and 5, so I'm hoping you can assist me.
why is the ring around saturn
Answer:
Saturn's rings are made up of ice, dust, rocks, moons and other satellite that orbit the gas giant as its equator, where gravity is strongest.
Explanation:
Fill in the blanks to create the lesson question, which is the broad question about gases that Boyle’s law answers. You will explore this question in the lab experiment.
Lesson Question: What is the effect of on the volume of a gas?
A. pressure
B. the number of moles
C. temperature
D. molecular structure
E. The mass of the Gas
Hypothesis: If the pressure on a gas is increased, then its volume will ..
A. Decrease
B. increase
C. Stay the same
D. fluctuate randomly
because the gas molecules will ...
A. scatter at random
B. Break apart
C. change into solid form
D. be pushed closer together
E. be pushed farther apart
Answer:
The kinetic energy would decrease with increaseDraw a complete enthalpy diagram for the following reaction: 4Na(s) + O2(g) → 2Na2O(s). H=-178kJ
The enthalpy change of the given reaction is negative, so the reaction is an exothermic reaction.
What is enthalpy change of a reaction?Enthalpy change of a reaction is the energy changes that occur when reactant molecules form products.
Enthalpy is the heat content of a substance.
When enthalpy change is positive, the heat content of the product is greater than that of the reactant and the reaction is an endothermic reaction.
Whereas, when enthalpy change is negative, the heat content of the reactant is greater than that of the product and the reaction is an exothermic reaction.
Therefore, since the enthalpy change of the given reaction is negative, the reaction is an exothermic reaction.
Learn more about enthalpy changes at: https://brainly.com/question/11628413
#SPJ1
Express your opinion for or against the theory of evolution
Explanation:
Critics of evolution commonly appeal to past scientific hoaxes such as the Piltdown Man forgery. It is argued that because scientists have been mistaken and deceived in the past about evidence for various aspects of evolution, the current evidence for evolution is likely to also be based on fraud and error.
Question:
the initial pressure of a 4.0 l sample of helium gas is measured to be 12 atm.
if the pressure of the sample is reduced 3.0 atm, what is the resulting volume?
options:
a. 12l
b. 16l
c. 1.0 l
d. 9.0 l
Answer:
B
Explanation:
Recall the ideal gas law:
[tex]\displaystyle PV = nRT[/tex]
Because n, R, and T remain constant, we can rewrite the equation as:
[tex]\displaystyle k = P_1V_1 = P_2V_2[/tex]
Where k is some constant. This form of the ideal gas law is referred to as Boyle's Law.
Substitute and evaluate:
[tex]\displaystyle \begin{aligned} (4.0\text{ L})(12\text{ atm}) & = (3.0\text{ atm})V_2 \\ \\ V_2 & = 16\text{ L} \end{aligned}[/tex]
In conclusion, the answer is B .
What happens when a saturated solution is further heated?
Answer:
If a saturated solution is heated to a higher temperature, it becomes unsaturated. Hence, the saturation point of a solution increases with the increase in temperature as there is an increase in solubility of the solute.
Explanation:
I hope this is able to help you! Please feel free to give feedback :)
If the concentration of H+ is 4.29 x 10-4 M, what is the pH?
pH = - log [H⁺]
pH = - log 4.29 x 10⁻⁴
pH = 4 - log 4.29
24. Explain why a saturated solution is not necessarily a concentrated solution.
Answer:
A saturated solution may not be a concentrated solution IF the solute is only sparingly or slightly soluble in the solution.
differentiate between lignite and anthracite
Answer:
Anthracite is the coal of highest grade whereas Lignite is the lowest grade coal
what is an unsaturated solution
Unsaturated solution: a solution in which more solute can be dissolved.
Explanation:
Salt dissolved in water or even sugar dissolved in water is an unsaturated solution if the quantity of dissolved salt/sugar is below the saturation point.
unsaturated solution: a solution in which more solute can be dissolved.
Explanation:
A solution in which the maximum amount of solvent has been dissolved. Any more solute added will sit as crystals on the bottom of the container.
which device requires electrical energy to produce a chemical change
Electrolytic cell is the device which requires electrical energy to produce a chemical change.
What is an Electrolytic cell?This is referred to as electrochemical cell that requires an external source of electricity to effect a chemical change.
Without the source of the electricity, the chemical change won't have been produced at all.
Read more about Electrolytic cell here https://brainly.com/question/19854746
#SPJ1
is there enough oxygen for complete combustion?
Answer:
Complete combustion occurs when there is enough oxygen to completely use up all the reactants. Incomplete combustion occurs when there is not enough oxygen resulting in the production of smoke, and less energy is produced when compared with complete combustion.
A species that has experienced a severe bottleneck event would be expected to _______. a. be better able to adapt to changing environmental pressures b. have few instances of inbreeding c. be more susceptible to disease and famine d. retain significant genetic diversity
Answer:
hi the answer is C
Explanation:
hope i helped :)
Answer:
be more susceptible to disease and famine
Explanation:
Mention five characteristics of an ideal fuel
Answer:
Ideal fuel shows the following characteristics:
• It should be less expensive,
• It should be easily available,
• It should produce a large amount of heat,
• It can be transported easily.
• It has high calorific value.
• It should burns easily in air at a moderate rate.
Which has the most thermal energy?
1 points
200 ml of cold water
200 ml of hot water
100 ml of hot water
100 ml of cold water
1. How can the rate of a chemical reaction be controlled?
Answer:
it can be controlled by balancing of the reaction
What is the compound N₂O3 called?
Answer:
Explanation:
Dinitrogen trioxide is a nitrogen oxide. Nitrogen trioxide appears as a blue liquid with a sharp, unpleasant chemical odor.
Description: Dinitrogen trioxide is a nitrogen oxide.ChEBINitrogen trioxide appears as ...
Synonyms: Dinitrogen trioxideNITROGEN TRIOXIDENitrogen oxide (N2O3)10544-7...
Molecular Formula: N2O3
Molecular Weight: 76.012 g/mol
Answer:
It is called Dinitrogen trioxide. Hope this helps!