Answer:
56.9 amu
Explanation:
Depending on the number of isotopes an element has, the Average atomic mass of isotopes of an element can be calculated using:
(atomic mass of isotope1 × decimal abundance of isotope1) + (atomic mass of isotope2 × decimal abundance of isotope2)
According to this question, two isotopes of element Z were given
- Isotope Z- 56 with atomic mass 56 is 70% abundance. This means that its decimal abundance is 0.70
- Isotope Z- 59 with atomic mass 59 is 30% abundance. This means that its decimal abundance is 0.30
Therefore, average atomic mass of element Z is:
= (56 × 0.70) + (59 × 0.30)
= (39.2) + (17.7)
= 56.9
need a top pick for another slide to talk about crystals
Answer:
tigers eyes
Explanation:
During which phase of the moon do neap tides occur?
A: full
B: gibbous
C: new
D: quarter
Plz I need help I think it’s A plz tell me before time runs out
IT IS NOT A
the full moon is incorrect I just don know the right answer sorry
when water changes state from a liquid to a solid is energy absorbed or lost?
Answer:
Loses
Explanation:
liquid changes into solid, heat is released. The energy released upon freezing, known as the enthalpy of fusion, is a latent heat, and is exactly the same as the energy required to melt the same amount of the solid.
Answer:
Matter either loses or absorbs energy when it changes from one state to another. For example, when matter changes from a liquid to a solid, it loses energy. The opposite happens when matter changes from a solid to a liquid. For a solid to change to a liquid, matter must absorb energy from its surroundings.
Explanation:
Which element would be the least similar to magnesium
Answer:
Chemistry Q&A Library decide which element probably forms a compound with chlorine that has a chemical formula most and least similar to the chemical formula of the compound formed by chlorine and magnesium most and least similar to magnesium:strontium,rubidium,phosphorus, cesium
Explanation:
hope this helped ❤✨
Which of the following occurs when a liquid becomes a gas
Answer:
Boiling occurs when a liquid changes to a gas below its surface as well as at the surface. The temperature at which a liquid boils is called its boiling point. The opposite of vaporization is called condensation. Sublimation occurs when the surface particles of a solid gain enough energy that they form a gas.Boiling occurs when a liquid changes to a gas below its surface as well as at the surface. The temperature at which a liquid boils is called its boiling point. The opposite of vaporization is called condensation. Sublimation occurs when the surface particles of a solid gain enough energy that they form a gas.Boiling occurs when a liquid changes to a gas below its surface as well as at the surface. The temperature at which a liquid boils is called its boiling point. The opposite of vaporization is called condensation. Sublimation occurs when the surface particles of a solid gain enough energy that they form a gas.Boiling occurs when a liquid changes to a gas below its surface as well as at the surface. The temperature at which a liquid boils is called its boiling point. The opposite of vaporization is called condensation. Sublimation occurs when the surface particles of a solid gain enough energy that they form a gas.
During a change in state, energy is transferred in the form of
heat
light
moisture
motion
Answer:
heat I think.....
Hope it will help you......During a change in state, energy is transferred in the form of heat.
Hence, Option (A) is correct.
What is States of matter ?
When energy is added or removed to matter in the form of heat, it changes state to form a state of matter.
A state of matter is defined as one of the ways in which matter can interact with itself to form a homogeneous phase.
Therefore , During a change in state, energy is transferred in the form
of heat. Hence, Option (A) is correct.
Learn more about States of matter here ;
https://brainly.com/question/9402776
#SPJ2
How can we gather more evidence about weather lava or water formed the channel on Mars
Science investigation skills
(I need to have 5 answers )
Answer 1.
Predict
Answer 2.
Use variable
Answer 3.
Plan and conduct investigations
Answer 4.
Draw conclusions
Answer 5.
Hypothesize
Answer 6.
Measure
Answer 7.
Classify and order
Answer 8.
Record and display data
Answer 9.
Use time and space relationships
Answer 10.
Use numbers
Answer:
Explanation:
-------Choices ---------------
Predict
Use variable
Plan and conduct investigations
Hypothesize
Measure
Classify and order
Record and display data
Use time and space relationships
Use numbers
=================
Selection:
These are in approximate order:
Hypothesize: Build an explanation of the observation. The hypothesis should be done after a thorough review of existing information. Library database searches and researcher interviews are suggested.Predict: prediction of what would happen if the explanation were correct. E.g., If an atom is homogenous and has no internal structure, then bombarding it with with neutrons will result in most neutrons going right through the atom, and none would be reflected backwards.Plan and conduct investigations: Design experiments that test the hypothesis. E.g., see if any neutrons are reflected backwards. If they are, the hypothesis needs to be changed.
Measure: Do the work. Calibrate the equipment and record everything.
Record and display data: Publish the results and conclusions for peer review. Seek other's input in order to generate general agreement that the data, procedure, and conclusions are warranted.
===
Use numbers? Nah. Not if they are not required to reach a conclusion.(e.g., the precipitate will be pink or the reaction will stink).
Use Time and Space Relationships: Yes, but only if the hypothesis depends on them.
Classify and Order: OK, especially if you are a biologist, but not always necessary.
Use variable: usually, but what and how depends on the experiment.
Blame: Place blame on the lab partner (Just kidding).
Which statement best describes a physical change?
Changes can occur to certain chemical properties of the substance, but the overall shape of the substance will remain the same.
Changes can occur to certain physical properties of the substance, but the overall shape of the substance will remain the same.
Changes can occur to physical properties of a substance, but the chemical composition of the substance remains the same.
Changes can occur to chemical properties of a substance, but the chemical composition of the substance remains the same.
Answer:
Changes can occur to physical properties of a substance, but the chemical composition of the substance remains the same.
Explanation:
Answer:
Changes can occur to physical properties of a substance, but the chemical composition of the substance remains the same.
Explanation:
im smart
Gases ___ out and fill their container completely
Answer: Gases have the lowest density of the three, are highly compressible, and completely fill any container in which they are placed. Gases behave this way because their intermolecular forces are relatively weak, so their molecules are constantly moving independently of the other molecules present. Solids, in contrast, are relatively dense, rigid, and incompressible because their intermolecular forces are so strong that the molecules are essentially locked in place.
Explanation:
Put the following scientists in order of their discoveries: 1. Dalton, 2. Bohr, 3. Rutherford, 4. Democritus, 5. Thomson
Please help me I really need the answer
Which statement is not
true?
A. Protons are positive and neutrons are
neutral
B. Electrons have the most mass of the
subatomic particles
C. Protons and Neutrons are found in the
nucleus
Electrons are found outside the nucleus
and have a negative charge
Answer:
B. Electrons have the most mass of the
subatomic particles
Compared to the mass of neutron and proton, mass of electron is negligible.
Answer:
B
Explanation:
when creating a Bohr model, you will usually mark protons + or P and neutrons are usually 0 or N.
Electrons are on the rings surrounding the nucleus, but everything else is inside.
Electrons are typically represented by - or E
What is the freezing point on this graph?
Answer:
Point a becuse it is the closest to -5*
Explanation:
Answer:
-5
Explanation:
Negative numbers get you confused.
- = Negative
5 = Number
You know 5 right?
I I I I I - 5
5 is a really less number already.
If you add a negative it will be double small.
Now lets figure out the problem:
What is the freezing point on this graph?
-5 is the smallest number
5 is bigger than -5
15 is bigger than 5 and -5
25 is bigger than all the numbers.
I know what your thinking. 25 is totally not the answer. Its the biggest number. Freezing is a very low number. What number is the lowest out of -5, 5, 15, 25. You see -5.
Therefore, -5 is freezing.
BE FIRST TO ANSWER PLEASEEE ASAP! :D
Answer:
I want to say E or B
Explanation:
HELPP
A monatomic ion always have one unit of charge. (+1 or -1) on the species
true or false
Answer:
No, this is invalid. The term mono in front of monoatomic simply refers to the number of atoms that are present in a compound or simply by itself it has no relationship with respect to the overall charge of the compound.
Explanation:
For instance Ca is considered as a monoatomic ion but it has a charge of +2.
Explain the law of conservation of mass.
Answer:
The law of conservation of mass or principle of mass conservation states that for any system closed to all transfers of matter and energy, the mass of the system must remain constant over time, as the system's mass cannot change, so quantity can neither be added nor be removed.
Explanation:
Your answer should be- that in a chemical reaction mass is neither created nor destroyed.
Explanation:
Is that good?
Explain why the gamma rays do not bend.
the human eye has three types of cones cells. damage to any one of the types of cone cells doesn't cause total blindness because of the
A. presence of rod cells
B. other two functional Cone cells
C. presence of optic nerves
they have rod cells - this helps them be able to see colors through a spectrrum located in the retina
What is the correct lewis dot structure for
24
12Mg 2+?
Answer:
Mg with 2 dots
Explanation:
Mg: as the valnce shell of Mg has 2 electrons only
presented by 2 dots
40POINTS AND BRAINLIEST Discuss the orders in which electrons are filled in the s and d subshells of the first three elements in group11
Step 1: add electrons to fill the 1s subshell (maximum of 2 electrons), when this is full, go to step 2. Step 2: add electrons to fill the 2s subshell (maximum of 2 electrons), when this is full, go to step 3. Step 3: add electrons to fill the 2p subshell (maximum of 6 electrons), when this is full, go to step 4. Step 4: add electrons to fill the 3s subshell (maximum of 2 electrons), when this is full, go to step 5. Step 5: add electrons to fill the 3p subshell (maximum of 6 electrons), when this is full, go to step 6. Step 6: add electrons to the 4s subshell (maximum of 2 electrons), when this is full, go to step 7. Step 7: add electrons to the 3d subshell (maximum of 10 electrons), when this is full, go to step 8. Step 8: add electrons to the 4p subshell (maximum of 6 electrons), when this is full, go to step 9. etc
So for Cu would be: 1s^22s^22p^63s^23p^63d^9
Ag would be: 1s^22s^22p^63s^23p^63d^104s^24p^64d^105s^1
Au would be: 1s^22s^22p^63s^23p^63d^104s^24p^64d^105s^25p^64f^145d^106s^1
Why does a planet stay in orbit?
Answer:
Gravity
Explanation:
A planet is gravitationally pulled around the sun.
Answer:
beause of gravitys pull and because the atmosphere of the beyond lol also bcs this i hope this helps your welcome boo >3
Explanation:
Newton realized that the reason the planets orbit the Sun is related to why objects fall to Earth when we drop them. The Sun's gravity pulls on the planets, just as Earth's gravity pulls down anything that is not held up by some other force and keeps you and me on the ground.
name the gas formed when metals react with dilute hcl
Answer:
im maybe 80% sure it's hydrogen gas
Answer:
When a metal reacts with dilute hydrochloric acid, it forms a metal chloride salt and hydrogen gas.
Which changes involve forming or breaking chemical bonds?
A.burning and digesting
B.boiling and melting
C.burning and melting
D.rusting and cutting
Answer:
d
Explanation:
i took the test
How can you tell if an element is a metal or a nonmetal??
Answer:
Elements to the left of the line are considered metals. Elements just to the right of the line exhibit properties of both metals and nonmetals and are termed metalloids or semimetals. Elements to the far right of the periodic table are nonmetals. The exception is hydrogen (H), the first element on the periodic table.
Explanation:
Answer:
looking at its metallic luster
Explanation:
Elements may be classified as either metals or nonmetals based on their properties. Much of the time, you can tell an element is a metal simply by looking at its metallic luster, but this isn't the only distinction between these two general groups of elements. Most elements are metals.
Does Magnesium or Carbon have similar properties to Beryllium ? Which one ?
Answer:
Yes, Magnesium
Question 1
Why can't wee see atoms?
Answer:
They're too small
Explanation:
Atoms are smaller than the wavelength of visible light
Answer:
too small
Explanation:
PLS HELP!!! ASAP!! 10 POINTS!!
Which of the subatomic particles are most responsible for the identity of an element?
neutrons
electrons
atoms
protons
Protons
Protons are the subatomic particle that determines the identity of an element.
Answer:
Explanation:Protons and neutrons are located in the nucleus of an atom and determine the mass of an atom. Protons have a positive electrical charge and electrons have a negative electrical charge. Atoms that have the same number of protons and electrons do not have an electrical charge.
NH3 is a _______________
Answer:
compound
Explanation:
Answer:
your answer would be compound
The distance of the Kentucky Derby, a classic horse race, is 1.25 miles. How is this distance expressed in furlongs ?
HELP ME THIS IS DUE TODAY PLEAS HELP SO I DONT FAIL