True or False
An enterprise data model is created only for documentation, but is otherwise inconsequential.

The given statement "A transitional off-to-on contact will allow logic continuity for one scan and then open, even though the Triggering signal may stay on." is true because a transitional off-to-on contact will allow logic continuity for one scan and then open, even though the triggering signal may stay on.

In ladder logic programming, a transitional off-to-on (TO) contact is a logic element that is used to detect a change in state from off to on of a signal. When the TO contact detects this change in state, it allows logic continuity for one scan cycle and then opens, even if the triggering signal remains on. This means that the TO contact can be used to generate a single pulse or to trigger an event based on a change in state.

For example, if a sensor detects a part on a conveyor belt and sends a signal to a PLC, a TO contact can be used to generate a single pulse to start a timer that controls the operation of a motor to move the conveyor belt. Even if the sensor continues to detect the part on the conveyor belt, the TO contact will only generate a single pulse and not continuously trigger the timer.

The use of transitional off-to-on contacts is a common technique in ladder logic programming to generate single pulses and trigger events based on changes in state.

You can learn more about Triggering signal at

https://brainly.com/question/30830338

#SPJ11

An example of an important physical site characteristic is a: D) Natural harbor

The physical characteristics of a place, such as its terrain, soil, vegetation, latitude, and elevation, are referred to as its "site." The circumstance is the position of one place in respect to another.

Geographers usually describe a place using both natural and human factors. The physical elements of a location that are produced by geological, hydrological, atmospheric, and biological processes make up that area's natural environment.

A natural harbor is defined as a landform where a section of a body of water is protected and deep enough to allow anchorage.

Thus, it is the only option that is an important physical characteristic as the others can't be described as physical site characteristic.

Read more about Physical Site Characteristic at: https://brainly.com/question/27265354

#SPJ1

Early electricians were very proud of their ability to calculate and design electrical systems using only their own knowledge and expertise, without the aid of computers or sophisticated tools.

In the early days of electricity, electrical systems were designed and installed by highly skilled individuals who were known as electricians. These electricians had to have a deep understanding of electrical theory and mathematics in order to design and install electrical systems that were safe, reliable, and efficient. They had to be able to calculate the load requirements of different circuits, design wiring and distribution systems, and ensure that all components were properly installed and grounded.

Despite the challenges they faced, early electricians took great pride in their ability to design and install complex electrical systems. Their work was highly respected, and they were considered to be among the most skilled tradespeople of their time.

You can learn more about electrical systems at

https://brainly.com/question/29767796

#SPJ11

VSEO (Video Search Engine Optimization) include: Video title,  Video description, Video tags, Video transcript,  Video sitemap, Video thumbnail, Video length, Viewer engagement and Viewer engagement.

VSEO (Video Search Engine Optimization) include:

1. Video title: The title should be descriptive, relevant, and include target keywords to help viewers understand the content and improve search rankings.

2. Video description: The description should provide a brief summary of the video content, including important keywords and phrases. This helps search engines index the video and show it in relevant search results.

3. Video tags: Tags are keywords that describe the video and help search engines understand the context. Choose relevant tags to improve visibility in search results.

4. Video transcript: Including a transcript (closed captions) can improve accessibility for users and help search engines understand the video's content.

5. Video sitemap: Submitting a video sitemap to search engines helps them index your video content and display it in search results.

6. Video thumbnail: An eye-catching thumbnail can attract viewers' attention and increase click-through rates.

7. Video length: Aim for an optimal video length based on your target audience and the purpose of the video, as this can impact viewer engagement and search rankings.

8. Viewer engagement: Encourage likes, comments, and shares to increase the video's visibility and improve its search rankings.

Know more about the Search Engine Optimization

https://brainly.com/question/20512550

#SPJ11

A terminal that allows a server to enter guest orders but not settle guest accounts is called a  A. cashier terminal. Other types of terminals that may be used in hospitality settings include precheck terminals.

A terminal is a device or computer that allows a user to access a server or network. In the context of hospitality or restaurants, a terminal can be used by servers to input guest orders into a point-of-sale (POS) system, which is typically managed by a server.

In this scenario, the terminal is restricted to only allowing servers to enter guest orders and is not authorized to settle guest accounts. This is known as a "cashier" terminal, as it is only used for inputting orders and not handling payments or cash transactions.

Other types of terminals that may be used in hospitality settings include precheck terminals, which allow guests to view menus and place orders before being seated, and self-service terminals, which allow guests to place orders and pay without assistance from a server.

Learn more about  point-of-sale (POS) system here:

brainly.com/question/28198761

#SPJ11

"A terminal that allows a server to enter guest orders but not settle guest accounts is called a __________ terminal."

Your answer: A terminal that allows a server to enter guest orders but not settle guest accounts is called a B. precheck terminal.

Learn more about guest orders: https://brainly.com/question/1094377

#SPJ11

Answer: False. While standard and protocol may be related, they do not mean the same thing. A standard is a set of guidelines or requirements that are agreed upon and followed to ensure consistency and quality. A protocol, on the other hand, is a set of rules or procedures that govern the exchange of information or data between systems or devices.

Explanation: 1. Standard: A set of rules, guidelines, or specifications that industries agree upon to ensure the compatibility and interoperability of products, services, and processes. Standards are usually established by recognized organizations or governing bodies.

2. Protocol: A specific set of rules and procedures for communication and data exchange between devices or systems. Protocols define how the data is transmitted, processed, and interpreted.

In summary, a standard defines the overall guidelines, while a protocol provides the specific rules for communication and data exchange within that standard.

Learn more about standard here: brainly.in/question/5363387

#SPJ11

Circuit breakers play an important role in ensuring the safe operation of electrical systems, particularly in fluorescent lighting circuits. As per the National Electrical Code (NEC) section 240.83(d).

Circuit breakers that act as switches in circuits for fluorescent lighting must adhere to particular specifications.

First, these circuit breakers need to be listed, which implies an accredited agency like Underwriters Laboratories (UL) has evaluated and approved them.

Second, "SWD+HID" must be written on the circuit breaker. The abbreviation "SWD" denotes "Switching Duty," indicating that the breaker was created primarily for switching purposes. HID, which stands for "High-Intensity Discharge," refers to the kind of lighting that is frequently used in commercial and industrial environments, such as metal halide or high-pressure sodium lamps.

Section 450.3 of the NEC specifies rules for the protection of transformers and related equipment, with the ultimate objective of guaranteeing safety and reducing the possibility of electrical dangers.

Learn more about National Electrical Code (NEC) here

https://brainly.com/question/30757813

#SPJ11

Servicing a central HVAC system's air distribution network, it is important to perform all of the above tasks to ensure that the system is functioning properly and efficiently. D

Servicing a central HVAC system's air distribution network, All of the above.

The system is functioning properly and efficiently.

This involves checking for obstruction and sufficient airflow, cleaning and sanitizing ductwork as needed, and inspecting all ductwork for leaks and broken dampers.
The first step in servicing a central HVAC system's air distribution network is to check for any obstruction or blockages in the system.

This can include anything from debris buildup in the ductwork to a dirty air filter.

It is important to ensure that there is sufficient airflow in the system to maintain proper operation and prevent any damage or malfunctions.
Next, cleaning and sanitizing the ductwork is an important step in ensuring that the air being circulated throughout the system is clean and free from any contaminants.

Over time, ductwork can become dirty and contaminated with mold, bacteria, and other harmful particles that can affect indoor air quality.

Regular cleaning and sanitizing can help prevent these issues and maintain a healthy living environment.
Finally, inspecting all ductwork for leaks and broken dampers is crucial in preventing any air leakage from the system.

Leaks and broken dampers can cause a loss of efficiency and an increase in energy costs.

By inspecting and repairing any damage, you can help maintain the efficiency of the system and prevent any unnecessary expenses.
Servicing a central HVAC system's air distribution network, it is important to perform all of the above tasks to ensure that the system is functioning properly and efficiently.

By checking for obstruction and sufficient airflow, cleaning and sanitizing ductwork as needed, and inspecting all ductwork for leaks and broken dampers, you can maintain a healthy and comfortable living environment while also reducing energy costs.

For similar questions on HVAC

https://brainly.com/question/535850

#SPJ11

A stud is a unit of building construction that is intended as a "vertical support". In construction, studs are vertical members that form the framework of walls and support the weight of the structure above them.

Construction is the process of building, designing, and maintaining physical structures, such as buildings, roads, bridges, and infrastructure. It involves a wide range of activities, including planning, design, site preparation, foundation work, construction, and finishing. Construction projects may vary in size and complexity, from small renovations to large-scale infrastructure projects that take years to complete. The construction industry employs a diverse range of professionals, including architects, engineers, builders, contractors, and project managers. Construction is an essential part of modern society, providing the infrastructure necessary for economic growth, social development, and quality of life. It requires careful planning and execution to ensure that structures are safe, functional, and sustainable.

Learn more about construction here:

https://brainly.com/question/29508580

#SPJ11

A DC generator that supplies rotor current to larger alternators is called an "exciter." Exciters are used to provide the initial electromagnetic field required for the alternators to produce AC voltage.

The photosystem's reaction centre, chlorophyll I transmits its excited electrons to ferrodoxin, a  exciter tiny protein on the stromal side of the thylakoid membrane, via a series of carriers. Then, ferrodoxin's electrons are transferred to NADP+ by the enzyme NADP reductase, producing NADPH.

Two water molecules are the source of the four protons and four electrons. Through an electron transport chain, the excited chlorophyll electrons are moved from photosystem II's electron acceptors to photosystem I.

Photosystems, the functional elements of photosynthesis, are recognised by particular pigment association and organisation patterns. Light energy is absorbed and transferred by photosystems, which also involves the transport of electrons. Photosystems are physically present in the thylakoid membranes.

Learn more about exciter here

https://brainly.com/question/28259864

A duct is defined as a single enclosed tubular space in a cellular metal floor member. It is a type of channel or passage that is designed to carry air or other substances from one location to another. Ducts are typically made of metal, plastic, or other materials that are resistant to corrosion and damage.

In a cellular metal floor member, the ducts are usually located within the floor structure and are used to distribute air or other fluids throughout the building. They may also be used to provide ventilation or to control temperature and humidity levels.

The design and construction of ducts is a complex process that requires careful planning and attention to detail to ensure that they are safe, effective, and efficient.

Learn more about Metal Cellular Floor here : brainly.com/question/21945166

#SPJ11

An airplane leaving ground effect will experience an increase in induced drag and require more thrust. Additionally, it will require a lower angle of attack to maintain the same lift coefficient. However, it will not experience a reduction in ground friction as it is no longer in contact with the ground.

When an airplane leaves ground effect, it means that it is no longer flying close to the ground and is moving into the freer airflow of the atmosphere. This can cause changes in the airplane's performance: Reduction in ground friction and slight power reduction: When an airplane is in ground effect, the ground provides a cushion of air that reduces the amount of drag and allows the airplane to fly more efficiently. Once the airplane leaves ground effect, it will experience an increase in drag due to the lack of this cushioning effect. This increase in drag will require the airplane to use slightly more power to maintain the same speed and altitude.

Learn more about friction here-

https://brainly.com/question/13000653

#SPJ11

Recptacles installed on 15 and 20 amp branch circuits shall be on the specific type designated for that amp rating, as specified in Section 210.21(B) of the National Electrical Code.

Therefore, receptacles on a 15-amp branch circuit shall be rated for 15 amps, and receptacles on a 20-amp branch circuit shall be rated for 20 amps.According to NEC 2017 406.4 (A), receptacles installed on 15 and 20 amp branch circuits shall be of the grounding type. This means that they should have a grounding terminal that is connected to an equipment grounding conductor of the circuit.

To learn more about circuits click the link below:

brainly.com/question/29988666

#SPJ11

The best indicator to the pilot of the load factor on the airplane is how firmly the pilot is pressed into the seat during a maneuver.

This physical sensation provides immediate feedback to the pilot regarding the level of gravitational force acting on the aircraft. While the amount of pressure required to operate the controls and airspeed when pulling out of a descent are important factors, they are not as direct of an indicator of the load factor as the sensation of being pressed into the seat.

To learn more about pilot click the link below:

brainly.com/question/28710972

#SPJ11

A router will search for startup configuration information in the following default order:

1. NVRAM (Non-Volatile Random Access Memory) - This is where the router stores its startup configuration by default.
2. TFTP (Trivial File Transfer Protocol) server - If the router is configured to look for a startup configuration on a TFTP server, it will check there next.
3. ROM (Read-Only Memory) - If the router cannot find a startup configuration in NVRAM or on a TFTP server, it will look for a default configuration in its ROM.
4. Setup mode - If no startup configuration is found in any of the above locations, the router will enter setup mode, where an administrator can manually configure the router.
A router will search for startup configuration information in the following default order:
1. NVRAM (Non-Volatile Random Access Memory)
2. TFTP (Trivial File Transfer Protocol) server
First, the router checks NVRAM for the saved startup configuration file. If it doesn't find one, it proceeds to search for a configuration file on a TFTP server, which is specified by the router's configuration register settings.

Learn more about configuration here

https://brainly.in/question/9181604

#SPJ11

if  both wires in the twisted pair CANbus need to be repaired, it is best to replace both cables.

Twisted pair cable is described as a type of wiring used for communications in which two conductors of a single circuit are twisted together for the purposes of improving electromagnetic compatibility.

We replace both cables because the twisted pairs are done so in order to cancel out interference arising dur to electromagnetism. One of the disadvantages of using Twisted pair cable is that it is unable to provide secure transmission of data and highly prone to external interference.

Learn more about Twisted pair cable at: https://brainly.com/question/13090298

#SPJ4

To determine the appropriate conductor size for a 104 ampere continuous load that is protected with a 150 ampere breaker, you should refer to the National Electrical Code (NEC) Table 310.15(B)(16).

Based on this table, a conductor with a size of 2 AWG (American Wire Gauge) would be suitable for your requirements, as it has an ampacity of 130 amps, which safely accommodates the 104 ampere continuous load and is protected by the 150 ampere breaker.In order for current to flow within a closed electrical circuit, it is not necessary for one charged particle to travel from the component producing the current (the current source) to those consuming it (the loads). Instead, the charged particle simply needs to nudge its neighbor a finite amount, who will nudge its neighbor, and on and on until a particle is nudged into the consumer, thus powering it. Essentially what is occurring is a long chain of momentum transfer between mobile charge carriers; the Drude model of conduction describes this process more rigorously. This momentum transfer model makes metal an ideal choice for a conductor; metals, characteristically, possess a delocalized sea of electrons which gives the electrons enough mobility to collide and thus affect a momentum transfer.

learn more about conductor here:

https://brainly.com/question/8426444

#SPJ11

The statement" A lamp is to be switched off 10s after a switch has been switched from it's on to off position. The most directly applicable timer to use would be the off-delay non retentive timer" is True.

The off-delay timer is a type of non-retentive timer that is used to delay the turning off of a device or system after a triggering event has occurred. In this case, the triggering event is the switch being moved from the on position to the off position, and the device that needs to be turned off is the lamp.

Since we want the lamp to be switched off 10 seconds after the switch has been moved to the off position, the most directly applicable timer to use would be an off-delay non-retentive timer. This type of timer will start counting down from the moment the switch is moved to the off position, and after the preset time has elapsed (in this case, 10 seconds), it will turn off the lamp.

Learn more about timers and their applications: https://brainly.com/question/13154395

#SPJ11

A technician adjusts the channel on a wireless router to minimize interference and improve the overall performance of the wireless network. By choosing either channel 1, 6, or 11.

The technician ensures that the router operates on non-overlapping channels, reducing the likelihood of signal interference from other nearby wireless networks or electronic devices. This helps maintain a stable and reliable connection for all connected devices.

The purpose of adjusting the channel on a wireless router is to minimize interference from other nearby wireless networks operating on the same frequency. By selecting a different channel, the technician can reduce the likelihood of signal collisions and improve the overall performance of the network. The technician typically chooses channels 1, 6, or 11 because they are non-overlapping and provide the best coverage for most wireless routers.

Learn more about the wireless router here:brainly.com/question/31519183

#SPJ11

Changing the channel on a wireless router is done to minimize interference and improve the network's performance. Channels 1, 6, and 11 are chosen as they are non-overlapping in the 2.4 GHz band used for Wi-Fi.

The purpose of adjusting the channel on a wireless router is to minimize interference and improve the overall performance of your wireless network. Routers operating on the same channel will interfere with each other's signals. Channels 1, 6, and 11 are chosen because they are the only non-overlapping channels in the 2.4 GHz band used for Wi-Fi. If there are many routers in the same area on the same channel, such as in an apartment building, changing the channel can help to reduce interference and improve your Wi-Fi speed.

https://brainly.com/question/32418169

c. quarry tile. Quarry tile is the ideal floor covering for a kitchen due to its durability, slip-resistance, easy maintenance, and ability to withstand high temperatures and heavy foot traffic.

Quarry tile is an ideal floor covering for a kitchen because it is durable, slip-resistant, and easy to clean. It can withstand high temperatures, moisture, and heavy foot traffic, making it a practical choice for a space where spills, stains, and grease are common. Unlike carpet, it does not absorb liquids or odours, and unlike asphalt tile, it does not crack or chip easily. Linoleum is also a good option, but it may not be as resistant to heat and moisture as quarry tile. Overall, quarry tile provides a balance of functionality and aesthetics, as it comes in a variety of colours and styles that can complement any kitchen design.

Learn more about Quarry tile here:

https://brainly.com/question/31073844

#SPJ11

The concept used to derivatively classify the new document is called "aggregation."

Aggregation is the process of combining several related pieces of information into one larger piece of information, without changing the overall meaning or content of the information.

The new document is derived from the source document by aggregating the information about the duration of the exercise.

The original document stated that the exercise would last for nine days, while the new document breaks this down into four days of preparation and five days of execution.

By doing this, the new document is able to provide more specific and detailed information about the exercise, while still accurately reflecting the information in the source document.
Aggregation is a common technique used in document classification, as it allows for the creation of more specific and detailed documents without the need for additional information or data.

By aggregating related information, documents can be created that are more targeted and useful for specific purposes or audiences.

Additionally, aggregation can help to reduce the amount of redundant or repetitive information in documents, making them easier to read and understand.

Overall, aggregation is a valuable tool for document classification and can be used in a variety of contexts to improve the quality and usefulness of documents.

For similar questions on Document

https://brainly.com/question/30365314

#SPJ11

Decreasing quantum can affect throughput by reducing the amount of time allocated to each process before a context switch occurs. This can lead to more frequent context switches, which can cause overhead and potentially decrease overall efficiency.

The following ways in which it affects is :

1. Decrease quantum size: Quantum size, also known as time slice or time quantum, is the amount of time allocated for each process to execute in a round-robin scheduling algorithm.

2. More context switches: When you decrease the quantum size, it leads to more context switches. The context switch occurs when the system switches from executing one process to another. This is because each process gets a smaller time slice to execute before it is preempted by another process.

3. Increased overhead: More context switches result in increased overhead, as the system spends more time switching between processes rather than executing them.

4. Reduced throughput: Throughput, which is the number of tasks completed per unit of time, gets affected negatively in this scenario. The overall efficiency and throughout of the system decrease due to the increased overhead caused by frequent context switches.

In summary, decreasing quantum size can negatively affect throughput by causing more context switches and increased overhead, ultimately reducing the efficiency of the system.

Learn more on Quantum Affect here : brainly.in/question/52916686

#SPJ11

True. A CAC (Common Access Card) is an example of a system that uses automated electronics to enable users to authenticate signatures, securely log onto computer systems, and gain access to designated areas.

The Common Access Card, sometimes known as the CAC, is a smart card that resembles a credit card in size. It is the accepted method of identification for eligible DoD and USCG contractor workers as well as Active Duty United States Defence forces, including the Selected Reserve and National Guard, US Department of Defence (DoD) civilian employees, and US Coast Guard (USCG) civilian employees. It serves as the primary card for granting physical entry to buildings and other restricted areas, as well as access to defense-related computer networks and systems. In accordance with the Geneva Conventions, particularly the Third Geneva Convention, it also functions as an identifying card.

Learn more about computer here-

https://brainly.com/question/30669092

#SPJ11

A single IPv6 hextet is made up of 16 bits. In the hextext 10CD, the first two digits (10) represent 8 bits (4 bits each), and the last two digits (CD) represent another 8 bits (4 bits each), making a total of 16 bits.

To determine the number of bits in a single IPv6 hextet like "10CD", follow these steps:

1. Understand that an IPv6 hextet consists of 4 hexadecimal digits.
2. Recall that each hexadecimal digit is represented by 4 bits.
3. Multiply the number of hexadecimal digits (4) by the number of bits per digit (4).

Calculation: 4 (hexadecimal digits) * 4 (bits per digit) = 16 bits

So, the single IPv6 hextet "10CD" is made up of 16 bits.

Learn more about digits at : brainly.com/question/30142622

#SPJ11

Nonmetallic-sheathed cable shall be secured by staples, cable ties, straps, hangers, or similar fitting at intervals not exceeding 4 1/2 feet and within 12 inches of every cabinet, box, or fitting according to section 334.30 of the National Electrical Code.

NM cable was invented by the Romex company in 1922 and was first described and listed by the NEC (National Electrical Code) in 1926, but it did not come into prevalent use until the early 1960s when plastics replaced woven rayon as the material used for the outer sheathing. From that point forward, NM cable became the standard for running residential electrical wiring in hidden locations, within walls, and in floor and ceiling cavities. Today, NM cable is the standard for nearly all applications—other than in exposed locations such as against basement walls or along exposed exterior walls, where conduit is still the standard.

Its popularity stems from the fact that NM cable is very easy to use and fairly inexpensive when compared to other methods of running wire, such as metal conduit or armored cable.

learn more about  Nonmetallic-sheathed here:

https://brainly.com/question/29644544

#SPJ11

True, in most cases, the reset input to a timer will override the control input of the timer. This is because the reset input is designed to immediately reset the timer's internal state, regardless of the control input status.

A timer is a device or program that measures the passage of time and can be used to control or trigger events at specific intervals. Timers are used in a wide range of applications, from cooking and exercise to industrial automation and electronic devices.

There are many types of timers, including mechanical timers, digital timers, and programmable timers. Mechanical timers use mechanical components, such as springs and gears, to measure and control time, while digital timers use electronic components, such as microprocessors and LCD displays. Programmable timers can be customized with specific time settings and are often used in industrial automation and control systems.

Timers are used in many industries, including manufacturing, healthcare, transportation, and entertainment. They can be used to trigger alarms, control machinery and equipment, and manage workflow and scheduling. Timers are essential tools for achieving precision, efficiency, and reliability in many applications.

Learn more about timer here:

https://brainly.com/question/10534421

#SPJ11

The command "copy running-config startup-config" is used to save the changes made to the running configuration of a Cisco router to its non-volatile RAM (NVRAM), which stores the startup configuration.

The command is a fundamental concept in computing that refers to a specific instruction or set of instructions that a computer program or operating system can execute. Commands are used to perform various tasks, such as launching an application, changing system settings, or performing a file operation. In the context of networking, commands are used to configure and manage networking devices, such as routers and switches. Examples of network commands include ping, traceroute, and telnet. Commands can be entered via a command line interface (CLI) or graphical user interface (GUI), and their syntax and behavior may vary depending on the operating system or application being used.

Learn more about The command  here:

https://brainly.com/question/28285661

#SPJ11

Hot spots in the combustion section of a turbojet engine are possible indicators of inefficient fuel combustion or a malfunctioning fuel injector.

They can also indicate a buildup of deposits or damage to the engine's insulation, which can lead to overheating and potential engine failure. It is important to monitor and address any hot spots in the combustion section to maintain the proper functioning and safety of the engine.
Hot spots in the combustion section of a turbojet engine are possible indicators of uneven fuel distribution, damaged or worn combustor liners, or blocked fuel injectors. These issues can lead to reduced engine efficiency, increased emissions, and potential engine damage if not addressed promptly.

To know more about turbojet engines:- https://brainly.com/question/1449210

#SPJ11

Hot spots in the combustion section of a turbojet engine are possible indicators of inefficient fuel combustion, potential engine damage or failure, and increased emissions.

It is important to monitor and address hot spots in order to maintain optimal engine performance and safety.

Learn more about hot spots: https://brainly.com/question/27561536

#SPJ11

In order to simplify cleanliness, window sills should be sloped toward the room and down at an angle of 20 degrees.

In the context of computers, a window is a graphical user interface element that displays the content of an application or program on a computer screen. Windows typically consist of a rectangular area with a title bar, borders, and controls that allow the user to resize, minimize, or close the window. Multiple windows can be opened simultaneously, allowing the user to multitask and switch between different applications or documents. Windows can also be arranged and tiled to optimize screen real estate and improve workflow. The concept of Windows was first introduced by Microsoft with the release of Windows 1.0 in 1985 and has since become a standard feature in most modern operating systems.

Learn more about window here:

https://brainly.com/question/28525121

#SPJ11

Continuous Load Protection: Overcurrent protection devices are sized at no less than 125% of the continuous load, plus 100% of the non continuous load. This ensures that the protection devices can handle both the sustained current of the continuous load and the occasional spikes of the non continuous load without tripping unnecessarily.

Verbs that we rarely employ with continuous tenses are considered non-continuous verbs. These "stative" verbs cannot convey the continuous or progressive aspect since they are about the state, not action. The most prevalent non-continuous verbs are listed below: feelings of dislike, love, preference, want and wish.

Stative verbs are verbs that aren't used in the  present continuous, so we don't use them with this tense.

Learn more about non continuous here

https://brainly.com/question/29331062

#SPJ11