Answer:
The answer is
1479.60 mLExplanation:
In order to calculate the volume needed we use the formula
[tex]V_2 = \frac{C_1V_1}{C_2} [/tex]
where
C1 is the concentration of the stock solution
V1 is the volume of the stock solution
C2 is the concentration of the diluted solution
V2 is the volume of thevdiluted solution
From the question
C1 = 1.45 M
V1 = 25 mL
C2 = 0.0245 M
So we have
[tex]V_2 = \frac{1.45 \times 25}{0.0245} = \frac{36.25}{0.0245} \\ = 1479.59...[/tex]
We have the final answer as
1479.60 mLHope this helps you
Suppose you are given samples of pentane, 2,2-dimethylpropane, 2-methylbutane and hexane. how you would go about determining which substance had the highest boiling point.
Answer:
Addiction
Explanation:
What is the answer? Please
Answer:
To instill a high degree of personal honor, self-reliance, and confidence in each cadet by presenting a military environment in which cadets will be forced to rely upon themselves and their shipmates to study, work, and learn.
Identify the reagents
Which of the following is equal to an impulse of 18 units?
O A. Force = 10, time = 2
B. Force = 0.1, time = 18
O C. Force = 6, time = 3
OD. Force = 7, time = 3
Answer:
the answer is C. this is because 6 times 3 is 18
How many Calories are there in 4600 Joules?
Answer:
1099.426
Explanation:
Solve: (6.825 x 10-3) (1.2 x 10-8)
Choose the answer with the correct number of significant figures.
a 8.2 x 10-11
b 0.081 x 10-8
C 8.01 x 1011
d None of the above
Answer: a.) 8.2 x 10^-11
Explanation:
Making a Lis changing something to improve your work. A) scenario
B) revision
C) entry event
D) wish list
Why do fireworks produce different colors
Two or more than two atoms with different physical or chemical properties can not combine together to form an element. Energy is the only factor that determines the color of light of fireworks.
What is element?Element generally consist of atoms or we can atoms combine to form element. Atoms of an element is always same, means all the properties of all atoms of one type of element is same.
Fireworks has many different types of element. When any element is given an energy. Then the process of excitation of electrons takes place from its outermost shells. Every element absorb characteristic wavelength of energy and releases light to the corresponding wavelength.
Therefore, energy is the only factor that determines the color of light of fireworks.
To know more about element, here:
https://brainly.com/question/8460633
#SPJ2
why is a lot of energy needed to break covalent bonds
Answer:
The strength of a bond between two atoms increases as the number of electron pairs in the bond increases.
Explanation:
How many sig figs are there
5.00000008
Answer:
2 sig figs.
Explanation:
Sig Fig Rules:
Any non-zero digit is a significant figure.
Any zeros between 2 non-zero digits are significant figures.
Trailing zeros after the decimal are significant figures.
HELPPP ANSWERS ????
A: 3
B: 2
C: 1
D: 4
Answer:
B. 2
Explanation:
We see from the reaction side of the equation that we have 2 Li. That means we need the same number of Li on the products side. Therefore, our only option is 2.
Answer:
b
Explanation:
Convert 542 nanograms to grams.
g.
Answer:
542 nanograms to grams = 5.42E-7g
Explanation:
The density of water at 40°C is 0.992 g/mL. What is the volume of 2.69 g of water at this temperature? V= mL
Answer:
[tex]\boxed {\tt 2.71169355 \ mL}[/tex]
Explanation:
Density can be found using the following formula:
[tex]d=\frac {m}{v}[/tex]
Rearrange the formula for v. Multiply both sides by v, then divide both sides by d.
[tex]d*v =\frac {m}{v}*v[/tex]
[tex]d*v=m[/tex]
[tex]\frac{d*v}{d}=\frac{m}{d}[/tex]
[tex]v=\frac{m}{d}[/tex]
The volume can be found by dividing the mass by the density. The mass is 2.69 grams and the density is 0.992 grams per milliliter.
[tex]m= 2.69 \ g\\d= 0.992 \ g/mL[/tex]
Substitute the values into the formula.
[tex]v=\frac{2.69 \ g}{0.992 \ g/mL}[/tex]
Divide. Note that the grams, or g, will cancel each other out.
[tex]v=\frac{2.69}{0.992 \ mL}[/tex]
[tex]v= 2.71169355 \ mL[/tex]
The volume of the water is 2.71169355 milliliters.
substance A is a nonpolar liquid and has only dispersion forces among its constituent particles. Substance B is also a nonpolar liquid and has about the same magnitude of dispersion forces among its constituent particles as substance A. When substance A and substance B are combined, they spontaneously mix. Why
Explanation:
The substance A and B will mix into one solution as it is a solvent interactions which is greater than or equal to the solute- solute and the solvent-solvent interactions. Thus when such interactions occurs, it is greater or equal to the some of the other two possible interactions. And here both have the same kind of interaction, and same magnitude, so they will makes to form a solution and mixes properly and spontaneously.
What is heat?
O Fire
O Hot
O Energy
O Potential
Answer:
Energy
Explanation:
Heat is a form of energy.
How do the key results indicate
Which of these statements is supported by the results of Thomson’s experiment? Check all of the boxes that apply.
Atoms are indivisible.
Cathode rays are made up of negatively charged particles.
Atoms contain negatively charged particles.
Answer: Cathode rays are made up of negatively charged particles.
Atoms contain negatively charged particles.
Complete hydrolysis of a hexapeptide gives 2 Gly, Leu, Phe, Pro, and Tyr. Reaction of the peptide with phenylisothiocyanate gave the phenylthiohydantoin of Pro. Partial hydrolysis of the peptide gave the following fragments: Phe-Gly-Tyr, Gly-Phe-Gly, Pro-Leu-Gly, Leu-Gly-Phe. What is the structure of the peptide
Answer:
The complete sequence : Pro-Leu-Gly-Phe-Gly-Tyr
Explanation:
For the formation of phenylisothiocyanate, the four peptide sequences overlap common residue to get the the complete sequence of the hexapeptide as shown in the diagram attached below
Attached below is the structure of the peptide
PLEASE HELP(DUE IN 10 Minuets)
Convert a speed of 933 cm/s to units of inches per minute
Answer:
220000 in/min
Explanation:
Step 1: Write out conversions
1 in ≈ 2.54 cm
60 sec = 1 min
Step 2: Set up dimensional analysis
[tex]\frac{933cm}{s} (\frac{60s}{1min} )(\frac{1in}{2.54cm} )[/tex]
Step 3: Evaluate
220039.4 in/min
Step 4: Sig figs
There are 3 sig figs
220039.4 in/min ≈ 220000 in/min
14. Which of the following will result in a chemical change?
A. Melting ice to obtain water
B. Evaporating alcohol into vapor
C. Burning coal in a furnace
D. Drying wood in a shed
Help ASAP
Answer:
C
Explanation:
a chemical change is when a substance changes into another.
wood burning turns into heat which would be considered a chemical change
HELP 100 POINTS WILL MARK BRAINLIEST In ancient times, early astronomers watched stars travel across the sky in one direction for several months, then over the course of a few weeks the stars would reverse course and move in the opposite direction. After these few weeks, the stars would reverse direction again and resume their original course. The ancient astronomers called these “wanderer stars”. After more research was done, it was found that these “wanderer stars” were actually other planets. As more data was collected, it was shown that all planets move at different speeds as they travel in their orbits around the Sun. As the Earth moves in its orbit, it moves faster than some planets and slower than others. This causes the Earth to “pass” some planets as it travels, which results in the appearance that the other planets move backwards. Is this a description of a scientific law or scientific theory? 100 points PLEASE HELP
Which of the following isotopes are NMR inactive?
a. 1H
b. 12C
c. 15N
d. 16o
e. 19F
f. 31P
Answer:
12C and 16O
Explanation:
Here, we want to select which of the options are NMR inactive. For an isotope to be NMR inactive, then the net nuclear spin is zero.
What this means is that the number of proton present coupled with the number of neutrons are an even number pair.
What we are saying here is that the number of protons is an even number while the number of neutrons too is an even number. So the net nuclear spin in this case is zero.
in the case of oxygen, we have 8 protons and 8 neutrons. This makes the nuclear spin zero and consequently makes the isotope NMR inactive.
Same is in the case of carbon. There are 6 protons and 6 neutrons and this also makes nuclear spin zero .
In all the other isotopes in the question, we have odd number even number or even number odd number pairs of protons and neutrons.
What is the answer? Please
Answer:
true
Explanation:
what is the answer? please
A peregrine falcon dives 176 meters through the air in 8 seconds. Its
average speed during the dive is 22 m/s. *
Answer:
This question is asking to find the average speed during the dive. The answer is 22m/s.
Explanation:
Average speed of a substance can be calculated knowing it's distance over a particular amount of time.
The formula for average speed is:
Average speed (s) = Distance (d) / time (t)
In the case of this question where A peregrine falcon dives 176 meters through the air in 8 seconds, the distance of the falcon is 176m, while the time is 8s. Hence;
Average speed = 176/8
Average speed = 22
Therefore, the average speed of the falcon diver is 22m/s.
A 0.500 g sample of tin (Sn) is reacted with oxygen to give 0.534 g of product. What is the empirical formula of the oxide?
Answer:
[tex]Sn_2O[/tex]
Explanation:
Hello,
In this case, given the mass of the sample and mass of tin we can compute the mass of oxygen via:
[tex]m_O=0.534g-0.500g=0.034g[/tex]
Thus, by using the atomic bas of tin and oxygen we can compute their moles:
[tex]n_{Sn}=0.500gSn*\frac{1molSn}{118.8gSn} =0.00421mol\\\\n_O=0.034gO*\frac{1molO}{16gO}=0.002125mol[/tex]
Next, we need to divide both moles by the moles of oxygen as those are the smallest in order to compute the subscript in the chemical reaction:
[tex]Sn=\frac{0.00421}{0.002125}=2\\ \\O=\frac{0.002125}{0.002125}= 1[/tex]
Therefore, empirical formula of the oxide should be:
[tex]Sn_2O[/tex]
Best regards.
which of the following is not true about water ? *
Water has a freezing point of 0℃
Water is chemically stable and makes a good energy source
Water has a density of 1 g/mL
water is polar
water has a boiling point of 100℃
Water is less dense as a solid
Select the answer from the drop-down, ranging from true or false.
Mixtures have components that are always in fixed ratios.
[ true or false ]
Compounds can only be separated physically.
[ true or false ]
The components of a mixture keep their unique properties.
[ true or false ]
Mixtures can be physically separated
[ true or false ]
Mixtures are pure substances
[ true or false ]
Compounds are pure substances
[ true or false ]
Answer:
False, False, True, True, False, True
Explanation:
Mixtures have components that are always in fixed ratios. FALSE. The ratio of components in a mixture is variableCompounds can only be separated physically. FALSE. Compounds can only be separated chemically.The components of a mixture keep their unique properties. TRUE. Mixtures can be physically separated. TRUE. Mixtures are pure substances. FALSE. Mixtures are formed by a mixture of 2 or more pure substances, not bonded chemically.Compounds are pure substances. TRUE.true? no false. ... no its true uhhhhh no gotta be false true. false. true. fase. gotta be tru false or maybe its true? nah its false
pls brainliest?
Which common item is made from copper?
soap
coins
baby powder
colored pencils
Answer:
coins
Explanation:
2. The four parts, or blocks, on the
periodic table are _d, and f.
s, P
a, b
Answer:
s, p
Explanation:
The four parts, or orbitals, on the periodic table are s, p, d, and f.