Though alchemists were often superstitious, they left a rich legacy for modern chemists. What was their main contribution?

Answer:

D d

Explanation:

Answer:

0.5g/cm^3

Explanation:

Density = Mass / Volume

Density = 20g / 42cm^3

Density = 0.476g/cm^3

note*: round to the nearest sigfig

Answer is: 0.5g/cm^3

The box's volume is 42cm³ and the mass is 20g then the density is 0.5g/cm³.

The mass of a substance per unit of volume is its density. Density is most frequently represented by the symbol, however the Latin letter D may also be used. Density is calculated mathematically by dividing mass by volume.

How much "stuff" is contained in a specific quantity of space is determined by its density. For instance, a block of the harder, lighter element gold (Au) will be denser than a block of the heavier element lead (Pb) (Au).

Because it enables us to predict which compounds will float and which will sink in a liquid, density is a crucial notion. As long as an object's density is lower than the liquid's density, it will often float.

Density = Mass ÷ Volume

Density = 20g ÷ 42cm³

Density = 0.476g/cm³

= 0.5g/cm³

Thus, the density is  0.5g/cm³.

To learn more about density, follow the link;

https://brainly.com/question/6107689

#SPJ2

Answer:

A. K₂C₂O₄          Potassium oxalate

B. CuC₂O₄          Copper oxalate

C. Bi₂(C₂O₄)₃         Bismuth (III) oxalate

D. Pb(C₂O₄)₂         Lead (IV) oxalate

E. (NH₄)₂C₂O₄       Ammonium oxalate

F. HC₂O₄⁻             Acid oxalate

Explanation:

C₂O₄⁻²  → oxalate anion

This is the conjugate base from the H₂C₂O₄ which is the oxalic acid. A weak dyprotic acid that can release 2 protons.

A. 2K⁺  +  C₂O₄⁻²  → K₂C₂O₄          Potassium oxalate

It can be formed by the neutralization of the acid with the base

H₂C₂O₄  + 2KOH  → K₂C₂O₄  +  2H₂O

B. Cu²⁺ +  C₂O₄⁻²   ⇄  CuC₂O₄  ↓

This is a precipitate.

C.  2Bi³⁺  +  3C₂O₄⁻²   ⇄  Bi₂(C₂O₄)₃  ↓

This is a precipitate.

D.  Pb⁴⁺ +  2C₂O₄⁻²   ⇄  Pb(C₂O₄)₂  ↓

This is a precipitate.

E. 2NH₄⁺  +  C₂O₄⁻²   ⇄  (NH₄)₂C₂O₄  ↓

This is a precipitate.

F. This is the conjugate strong base, for the weak acid

H⁺  +  C₂O₄⁻²   ⇄  HC₂O₄⁻

HC₂O₄⁻  + H₂O  ⇄  C₂O₄⁻²  +  H₃O⁺    Ka

HC₂O₄⁻  + H₂O  ⇄  H₂C₂O₄  +  OH⁻    Kb

HC₂O₄⁻  is an amphoteric compound

A. K₂C₂O₄            →Potassium oxalate

B. CuC₂O₄           →Copper oxalate

C. Bi₂(C₂O₄)₃        →Bismuth (III) oxalate

D. Pb(C₂O₄)₂        →Lead (IV) oxalate

E. (NH₄)₂C₂O₄      →Ammonium oxalate

F. HC₂O₄⁻             →Acid oxalate

Given:

It is the conjugate base from the H₂C₂O₄ which is the oxalic acid. A weak diprotic acid that can release 2 protons.

The reactions involved in this are:

A. 2K⁺  +  C₂O₄⁻²  → K₂C₂O₄          

B. Cu²⁺ +  C₂O₄⁻²   ⇄  CuC₂O₄  ↓

C. 2Bi³⁺  +  3C₂O₄⁻²   ⇄  Bi₂(C₂O₄)₃  ↓

D. Pb⁴⁺ +  2C₂O₄⁻²   ⇄  Pb(C₂O₄)₂  ↓

E. 2NH₄⁺  +  C₂O₄⁻²   ⇄  (NH₄)₂C₂O₄  ↓

↓- This symbol denotes the precipitate formation.

F. H⁺  +  C₂O₄⁻²   ⇄  HC₂O₄⁻

HC₂O₄⁻  is an amphoteric compound.

Find more information about "Conjugate base" here:

brainly.com/question/22514615

Answer:

5.1  x 10⁻¹

Explanation:

Given:

6.4 × 10⁻³ × 8.0 × 10¹

Find:

Value of equation

Computation:

6.4 × 10⁻³ × 8.0 x 10¹

[6.4 × 8.0] × [10⁻³ × 10¹]

[51.2] × [10⁻²]

5.12 x 10⁻¹

5.1  x 10⁻¹ (Approx)

Answer: the two parameters change inversely; as hydrogen ion concentration increases, pH falls. due to the logarithmic relationship, a large change in hydrogen ion concentration is actually a small change in pH. For example, doubling the hydrogen ion concentration causes pH to fall by just 0.3.

Answer:

150.7

Explanation:

162.5 - 11.8 = 150.7

Answer:

CH₃(CH₂)₁₀COONa

Explanation:

The compounds given are

NaCl

CH₃COOH

CH₃COONH₄

CH₃(CH₂)₁₀COONa

CH₃(CH₂)₁₀CH₃

CH₃(CH₂)₁₀COONa will form micelle . Micelle are formed by soap solution which helps in the removal of oily dirt from our clothes . They are spherical shaped tiny droplet of oil which contains the tail of long chain organic compound like salt of long chain fatty  acids . The surface of the droplet is lined with the tip of the chain which consists of negative charge of the tail end . On the average , each micelle contains a specific amount of charge . Due to it , they make colloidal solution in the water and gets washed off my water . The oily dirt is thus removed .

CH₃(CH₂)₁₀COONa   ⇄     CH₃(CH₂)₁₀COO⁻   +    Na⁺

CH₃(CH₂)₁₀COO⁻  part which is long chain of fatty acid gets adsorbed by oily droplet formed by oily dirt  and forming micelle .

Answer:

compound and elements.

Explanation:

Answer:

THE MOLARITY IS 2.22 MOL/DM3

Explanation:

The solution formed was as a result of dissolving 37.5 g of Na2S in 217 g of water

Relative molecular mass of Na2S = ( 23* 2 + 32) = 78 g/mol

Molarity in g/dm3 is the amount of the substance dissolved in 1000 g or 1 L of the solvent. So we have;

37.5 g of Na2S = 217 g of water

( 37.5 * 1000 / 217 ) g = 1000 g of water

So, 172.81 g/dm3 of the solution

So therefore, molarity in mol/dm3 = mol in g/dm3 / molar mass

Molarity = 172.81 g/dm3 / 78 g/mol

Molarity = 2.22 mol/dm3

The molarity of the solution is 2.22 mol/dm3

Answer:

The answer is 2.22mol

Explanation:

Answer:

Electrolytes are minerals in your body that have an electric charge. They are in your blood, urine, tissues, and other body fluids. Electrolytes are important because they help. Balance the amount of water in your body

Explanation:

Answer:

Explanation:

1.

[tex]1000 \:g = \:1\:kilogram\\x \: grams = 38,000\:kilogram\\\\x = 38,000,000 \:grams[/tex]

2.

[tex]1 \:ml =0.001\:l\\4.3\:ml =x\: l\\\\x = 0.0043[/tex]

3.

[tex]1\:m= 1000\:mm\\6.5\:m = x\\\\x = 6500 mm[/tex]

4.

[tex]1\:km = 100,000\:cm \\0.02km = x\:cm\\\\x = 2000\:cm[/tex]

5 .[tex]20\°C = 20+273 \\= 293 K[/tex]

Answer:

The trade was difficult with the old system.

Explanation:

The existing system for the measurement of goods did not work well in the trade because there are different system used by the people of different cities so metric system was used in the whole country in place of the old system of measurement during the French Revolution in order to make the trade easier and quick across the country. This metric system is extensively used in the trade as compared to the old system of measurement due to its easiness and fast.

Answer:what’s the answer

Explanation:

Answer:

The pH of the solution is 4.69

Explanation:

Given that,

Mass of potassium = 2.643 grams

Weight of water = 50.00 mL

Weight of HCl=100.00 ml

Mole = 0.120 M

We know that,

[tex]KCH_{3}(CH_{2})_{2}CO_{2}[/tex] is a basic salt.

Let's write it as KY.

The acid [tex]HCH_{3}(CH_{2}CO_{2})[/tex] would become HY.

We need to calculate the moles of KY

Using formula of moles

[tex]moles\ of\ KY=\dfrac{m}{M}\times1000[/tex]

[tex]moles\ of\ KY=\dfrac{2.643}{126}\times1000[/tex]

[tex]moles\ of\ KY=20.97\ m\ mole[/tex]

The reaction is

[tex]KY+HCl\Rightarrow HY+ KCl[/tex]

The number of moles of KY is 20.98 m

initial moles = 20.98

Final moles [tex]m=20.98-0.120\times100= 8.98[/tex]

We need to calculate the value of pKa(HY)

Using formula for pKa(HY)

[tex]pKa_{HY}=-log Ka[/tex]

[tex]pKa_{HY}=-log(1.5\times10^{-5})[/tex]

[tex]pKa_{HY}=4.82[/tex]

We need to calculate the pH of the solution

Using formula of pH

[tex]pH=pKa+log(\dfrac{[KY]}{[KH]})[/tex]

Put the value into the formula

[tex]pH=4.82+log(\dfrac{8.98}{12})[/tex]

[tex]pH=4,69[/tex]

Hence, The pH of the solution is 4.69

Answer:

Ionic, metal, organic

Explanation:

In this case, we have to analyze each compound:

-) [tex]CaCl_2 [/tex]

In this compound, we have a non-metal atom (Cl) and a metal atom (Ca) . So, we will have a high electronegativity difference between these atoms, With this in mind, we will have an ionic bond. Ions can be produced:

[tex]CaCl_2~->~Ca^+^2~+~2Cl^-[/tex]

The cation would be [tex]Ca^+^2[/tex] and the anion is [tex]Cl^-[/tex]. So, we will have an ionic compound.

-) [tex]Cu[/tex]

In this case, we have a single atom. If we check the periodic table we will find this atom in the transition metals section (in the middle of the periodic table). So, this indicates that Cu (Copper) is a metal.

-) [tex]C_2H_6[/tex]

In this molecule, we have single bonds between carbon and hydrogen. The electronegativity difference between C and H are not high enough to produce ions. So, with this in mind, we will have covalent bonds. This is the main characteristic of organic compounds. (See figure 1)

CaCl₂, Cu, C₂H₆ are ionic, metal, and organic compounds, respectively.

CaCl₂ is formed by a metal (Ca) and a non-metal (Cl). Due to the difference in their electronegativities, they form ionic compounds. These compounds tend to have high melting and boiling points and conduct electricity in aqueous solution.

Cu is a transition metal. It is a good electric and heat conductor, which is why it is used in cables. It also has high melting and boiling points.

C₂H₆ (ethane) is a hydrocarbon, that is, an organic compound (formed by at least C and H). They are bad conductors and have low melting and boiling points.

CaCl₂, Cu, C₂H₆ are ionic, metal, and organic compounds, respectively.

You can learn more about chemical substances here: https://brainly.com/question/8930926

Given :

Some volume measurements :

[tex]0.75 \times 10^{-3}\ mL,\ 325\ \mu L,\ 4.11 \times 10^{-4}\ dL[/tex]

To Find :

Rank the measurements from largest to smallest.

Solution :

Now , [tex]1\ \mu l=10^{-3}\ ml[/tex].

Also , [tex]1\ dl=100\ ml[/tex].

So , the measurements in same units are :

[tex]0.75 \times 10^{-3}\ mL,\ 325 \times 10^{-3}\ mL , 4.11 \times 10^{-4} \times 100\ mL\\\\0.75\times 10^{-3}\ mL ,\ 325\times 10^{-3}\ mL ,\ 41.1\times 10^{-3}\ mL[/tex]

So , the order from highest to lowest is :

[tex]325\times 10^{-3}\ mL ,\ 41.1\times 10^{-3}\ mL ,\ 0.75\times 10^{-3}\ mL[/tex]

Hence , this is the required solution .

325 µL > 41.1 µL > 0.75 µL is the ranking of the measurements from largest to smallest.

Measurements have a crucial role in many aspects of daily life, including science, engineering, construction, and cookery. They enable precise measurement, comparison, and communication of an object's size, quantity, or amount. The most widely used measurement systems globally are the metric and imperial systems. There are other measurement systems as well. The International System of Units (SI), generally known as the metric system and based on multiples of ten, is extensively used. It comprises measures for length and mass including metres, grammes, and litres. Units like feet, pounds, and gallons are part of the imperial system, which is primarily used in the United States.

1 mL = 1000 µL      

1 dL = 100 mL

.75 x [tex]10^{-3}[/tex] mL = .75 x [tex]10^{-3}[/tex] x 1000 µL

                      = 0.75 µL

4.11 x [tex]10^{-4}[/tex] dL = 4.11 x[tex]10^{-4 }[/tex]x 100 mL

                     = 0.0411 mL

                     = 41.1 µL

325 µL > 41.1 µL > 0.75 µL

To know more about measurements, here:

https://brainly.com/question/2384956

#SPJ6

Answer:

[tex]m_{O_2}=6gO_2[/tex]

Explanation:

Hello,

In this case, given the reaction:

[tex]2S+3O_2\rightarrow 2SO_3[/tex]

Thus, for 4.00 g of sulfur (atomic mass = 32 g/mol), we apply the shown 2:3 mole ratio with oxygen (molar mass = 32 g/mol) in order to compute its requirement:

[tex]m_{O_2}=4.00gS*\frac{1molS}{32gS}*\frac{3molO_2}{2molS}*\frac{32gO_2}{1molO_2}\\ \\m_{O_2}=6gO_2[/tex]

Best regards.

The mass of oxygen would be required is [tex]6gO_2[/tex]

[tex]= 4.00 \times \frac{1molS}{32gS} \times \frac{3molO_2}{2molS} \times \frac{32gO_2}{1molO_2} \\\\= 6gO_2[/tex]

Here for 4.00 g of sulfur (atomic mass = 32 g/mol), we used the shown 2:3 mole ratio with oxygen (molar mass = 32 g/mol).

Learn more: https://brainly.com/question/17961582?referrer=searchResults

Answer: Yes

Explanation:

Density of a liquid depend on its volume. This is because Density is mass of liquid divided by volume.

Density is inversely proportional to volume.

As density increases, volume decreases and vice versa. The density for water is 1g/ milliliter but it changes with changes in temperature or there are impurities dissolved in it. Ice is less dense that liquid water and it's the major reason it's float because it's volume is inversely proportional to it's density.

Answer:

521 nm

Explanation:

The following data were obtained from the question:

Frequency (f) = 5.76×10¹⁴ s¯¹

Wavelength (λ) =?

Velocity (v) , wavelength (λ) and frequency of a wave are related according to the following equation:

Velocity (v) = wavelength (λ) × frequency (f)

v = λf

With the above equation, we can obtain the wavelength of the photon of the green light as follow:

Frequency (f) = 5.76×10¹⁴ s¯¹

Velocity of light (v) = 3×10⁸ m/s

Wavelength (λ) =?

v = λf

3×10⁸ = λ × 5.76×10¹⁴

Divide both side by 5.76×10¹⁴

λ = 3×10⁸ / 5.76×10¹⁴

λ = 5.21×10¯⁷ m

Finally, we shall convert 5.21×10¯⁷ m to nanometer (nm).

This can be obtained as follow:

1 m = 1×10⁹ nm

Therefore,

5.21×10¯⁷ m = 5.21×10¯⁷ × 1×10⁹

5.21×10¯⁷ m = 521 nm

Therefore, the wavelength (λ) of the photon of the green light is 521 nm

Answer:

17.5609grams

Explanation:

According to the question, a sample of mass 6.814 grams is added to another sample weighing 0.08753 grams i.e.

= 6.814 + 0.08753

= 6.90153 grams

The result of this mixture i.e. 6.90153 grams is divided into three equal parts i.e.

= 6.90153 ÷ 3

= 2.30051 grams

This means that each equal part weighs 2.30051 grams

One of the yield (2.30051 grams) is multiplied by 7.6335 times i.e.

= 2.30051 × 7.6335

= 17.56094309

Hence, the final mass is 17.5609grams

Answer:

65.8 and it is shown considering the significant figures of the shortest number.

Explanation:

Hello,

In this case, when we add 25.4 and 40.433 the result is 65.833, nevertheless, the result is shown based on the initial number having the fewest amount of significant figures that in this case is 25.4 that has three, therefore, the result must be 65.8 and it is shown considering the significant figures of the shortest.

Regards.

Answer:

A. Neopentane.

B. 2,2-dimethyl-propane.

Explanation:

Hello,

In this case, for the given compound we can spell out two possible names:

A. Neopentane: it is, because the molecule has five carbon atoms wherein there is a central one, bonded to the other four.

B. 2,2-dimethyl-propane: it is, because we find two methyl radicals at the second carbon.

Regards.

Answer:

Which jacket traps the most heat.

Explanation:

I took the test

Answer:

B. Which jacket traps the most heat?

Explanation:

Just got it right on Edg

Answer:

aluminium is all of isotope with 14 neutrons .

Answer:

Difference between Vapor and Gas

Usually, a vapour phase consists of a phase with two different substances at room temperature, whereas a gas phase consists of a single substance at a defined thermodynamic range, at room temperature

Explanation:

Answer:

The amino acid will become more negatively charged

Explanation:

Amino acids are organic compounds containing the positive amine (-NH₂) group which is the basic group, and the negative carboxylic (-COOH) group, which is the acidic group. Because they contain both acidic and basic groups with a positive and negative charge that do not contain an overall electric charge, they are known as zwitterions. They are the smallest units of a protein molecule.

When a hydroxide group is added to an amino acid, the PH is increased, and the hydrogen ion on the amine (NH₃+) is removed, making the compound to have an overall negative charge, hence it is no longer a zwitterion.

[tex]\chemfig{N H_3^+-R-CH-COO^- + OH^- \longrightarrow \chemfig{N H_2-R-CH-COO^- + H_2O[/tex]

notice that the amino group has a net negative charge on the product side of the reaction

The addition of hydroxide to an amino acid affects the charge on the amino acid as it will become more negatively charged.

It will become more negatively charged.

When placed in an electromagnetic field, the physical attribute of matter known as electric charge causes it to experience a force.

A positive or negative electric charge can exist. Amino acids are chemical molecules made up of amino and carboxylate. Hydroxide is a polyatomic ion made up of two elements: oxygen and hydrogen.

Find out more information about acid here:

https://brainly.com/question/24784580?referrer=searchResults

Answer:

B. CO2

Explanation:

Because its a neutral compound hence lacks any form of dipole dipole interaction

Answer:

D.ionic interaction is a strong interaction

When atoms come close enough to one another, an ionic connection is created. Atoms can interact with one another ionically, and this distance is greater than the bonding distance. Therefore, option D is correct.

The main interaction taking place in ionic compounds is ionic bonding, a form of chemical bonding that includes the electrostatic attraction between two atoms or ions with dramatically differing electronegativities.

Ions with opposing charges are drawn to one another through ion-ion interactions. They are also known as ionic bonds, because they are what keep ionic compounds together. opposing charges attract each other whereas like charges repel each other.

The whole transfer of valence electrons between atoms is referred to as an ionic bond. It is a kind of chemical connection that produces two ions with opposing charges. In ionic bonding, the nonmetal receives the electrons to become a negatively charged anion while the metal gives them up to become a positively charged cation.

Thus, option D is correct.

To learn more about ionic interaction follow the link;

https://brainly.com/question/4082308

#SPJ5