the wire is 5.20 cm from the charge and carries a current of 68.5 A in a direction opposite to that of the moving charge. Calculate the magnitude of the force on the charge.

Answers

Answer 1

Complete Question

A 6.00-µc charge is moving with a speed of 7.50x10^4 m/s parallel to a very long, straight wire. the wire is 5.20 cm from the charge and carries a current of 68.5 A in a direction opposite to that of the moving charge. Calculate the magnitude of the force on the charge.

Answer:

The value is [tex]F =1.20 *10^{-4} \ N[/tex]

Explanation:

From the question we are told that

     The magnitude of the charge is  [tex]Q = 6.00\muC = 6.00 *10^{-6} \ C[/tex]

      The speed is  [tex]v = 7.50 *10^{4} \ m/s[/tex]

      The distance of the wire from the charge is  [tex]d = 5.20 \ cm = 0.0520 \ m[/tex]

       The current flowing through the wire in the opposite direction to the charge  is  [tex]I _2 = 68.5 \ A[/tex]

  Gnerally the magnitude of force on that charge is mathematically represented as

      [tex]F = qvB[/tex]

Here B is magnetic field which is mathematically represented as

              [tex]B = \frac{\mu_o * I}{2\pi d}[/tex]

Here  [tex]\mu_o[/tex] is the permeability of free space with value  [tex]\mu_o = 4\pi * 10^{-7} N/A^2[/tex]

 So

       [tex]F = qv[\frac{\mu_o * I}{2\pi d}][/tex]

=>     [tex]F = 6.0*10^{-6} * (7.50 *10^{4})[\frac{4\pi * 10^{-7} * 68.5 }{2* 3.142 * 0.0520 }][/tex]      

=>    [tex]F =1.20 *10^{-4} \ N[/tex]

 


Related Questions

Which statement describes S waves? A. They move side to side.B.They arrive betore P waves. C. They travel through liquids D. They occur at Earth's surtace.​

Answers

Answer: they move side to side

Explanation:

i took the test

What is the formula for speed?

गतत का सूत्र क्या है?

A : Distance covered/Time | तय की गई

दरूी/समय

B : Change in velocity/Time | वेग में

पररवतषन/समय

C : Distance in definite direction /Time |

तनजचचत टदशा में दरूी/समय

D : Change in momentum/Time | संवेग में

पररवतषन/समय
Ans:
A : Distance covered/Time | तय की गई

दरूी/समय

Answers

Explanation:

Formula for speed = Distance covered/Time

Therefore,

Option A is correct.

Answer:

a.distance÷timetaken

Explanation:

The formula for speed is speed = distance ÷ time. To work out what the units are for speed, you need to know the units for distance and time. In this example, distance is in metres (m) and time is in seconds (s), so the units will be in metres per second (m/s).

2
A crane has an arm to which is attached a frictionless pulley. A cable passes over the pulley and
supports a load of 10 kN as shown.
frictionless pulley
104N
30
30°
crane arm
load
10 KN
The crane arm exerts a force F on the pulley.
What is the value of F?
C
8.7 KN
10 KN
D
A
17 kN
B
5.0 KN

Answers

Answer:

17kN

Explanation:

The force of 10 kN in the cable and the load of 10 kN both have a component along the crane arm.

The force F exerted by the crane arm on the pulley is the sum of these 2 components.

Component of force in cable along the crane arm = 10 cos 30°

Component of load along the crane arm = 10 cos 30°

Considering the forces on the pulley,

F = 10 cos 30° + 10 cos 30°

Force F = 17.32 kN = 17 kN

which graph best demonstrates the general relationship between mass and temperature similar to the trend of thermal energy absorbed by your sand and water samples

Answers

Answer: the first one

Explanation: got it right on edg

Answer:

The first graph

Explanation:

Correct on Edge 2022! :]

Erica is working in the lab. She wants to remove the fine dust particles suspended in a sample of oil. Which method is she most likely to u

Answers

Answer:  Option A is your answer

Explanation:

PLEASE HLEP ME ASAP

Tom, a 13 year old boy, wants to train for a 5k Fun Run that his school is organizing. What area of fitness should Tom focus on? What activities should he do to improve this area?

Answers

Answer:

cardiovascular endurance

Explanation:

In order for Tom to successfully complete the marathon, he should focus on being able to maintain a constant pace without tiring easily.

the graph below represents the relationship between velocity and time for an object moving along a straight line.

What is the magnitude of the object's acceleration?

1. 5.0 m/s^2

2. 8.0 m/s^2

3. 10. m/s^2

4. 20. m/s^2​

Answers

Answer:

10. m/s^2

Explanation:

40-(-10)= 50

50/5 =10

This question can simply be answered by using the slope of the velocity-time graph.

The correct answer for the magnitude of the acceleration is "3. 10 m/s²".

Since the graph between the velocity and the time is in the form of a straight line. Hence, the acceleration can be calculated as the slope of this line. We will use the first and last point of the line to calculate the slope (acceleration):

[tex]Acceleration = Slope = \frac{v_2 - v_1}{t_2-t_1}[/tex]

where,

v₁ = initial velocity from the graph = - 10 m/s

v₂ = final velocity from the graph = 40 m/s

t₁ = initial time from the graph = 0 s

t₂ = final time from the graph = 5 s

Therefore,

[tex]Acceleration = \frac{40\ m/s\ -\ (-\ 10\ m/s)}{5\ s\ -\ 0\ s}[/tex]

Acceleration = 10 m/s²

The attached picture shows the types of a velocity-time graph.

Learn more about the velocity-time graph here:

https://brainly.com/question/11290682?referrer=searchResults

what are Newton's 3 laws

Answers

Answer:

Newton 3 laws

Explanation:

1.object will not change its motion unless a force acts on it . 2.the force on an object is equal to it's time mass on acceleration. 3. When 2 o jecys interact they apply forces to each other of equal.

Answer- In the first law, an object will not change its motion unless a force acts on it. In the second law, the force on an object is equal to its mass times its acceleration. In the third law, when two objects interact, they apply forces to each other of equal magnitude and opposite direction.
Hope this helps:)

PLEASE PLEASE HELP PICTURE INCLUDED

Answers

Answer:

a is the answer

Explanation:

A 10 [kg] object is dropped from rest. a. How far will it drop in 2 [s]?

Answers

Answer:

y=0.5 g t^2

=0.5*10*2^2

=20 m

Describe two similarities and two differences between electric and magnetic field lines. (Consider such things as where they originate and terminate, how they are related to the direction and strength of the field, whether they are closed curves or lines, and whether there's anything you can say about their flux through a closed surface.). Others

Answers

Answer:

Please see below as the answer is self- explanatory.

Explanation:

Similarities:The field vector is tangent to the field lines at any point of the trajectory.The density of field lines is proportional to the strength of the field.Differences:Electrostatic Field lines originate in charge distributions of positive charges and end in charge distributions of negative charges.Magnetic Field lines are closed lines, due to there are no isolated magnetic charges discovered yet.Electrostatic Field lines have the direction of the trajectory taken by a positive test charge.Magnetic Field lines have the direction defined by right-hand rule.Vector net flux of electrostatic field lines through a closed surface is equal to the net charge enclosed by the surface.Vector net flux of magnetic field lines through a closed surface is always zero.

Similarities

Field vectorDensity of field lines

Differences

Dispersions of positive charges .No separated attractive charges.

Electric and Magnetic field lines.

Similarities:

The field vector is tangent to the field lines at any point of the trajectory. The density of field lines is relative to the quality of the field.

Differences:

Electrostatic Field lines begin in charge dispersions of positive charges and conclusion in charge dispersions of negative charges.

Magnetic Field lines are closed lines, due to there are no separated attractive charges found yet.

Learn more about "Magnetic Lines":

https://brainly.com/question/17012638?referrer=searchResults

When a 600 g mass is suspended from a spring, the spring stretches 1.2 cm. What is the spring constant of the spring? ​

Answers

Well first you need to know the formula for the spring force. It’s -1/2k*d

K being the constant

D being the displacement

We can actually find the force on the spring by calculating the weight of the block. It would be mass multiplied by gravity, convert the grams to kilograms first tho.

600/1000 = 0.6kg

0.6kg * 9.8 m/s^2 = 5.88N

Now plug everything into the equation, also convert the centimeters to meters:

1.2/100 = 0.012 meters

5.88 = -1/2k*(0.012)

5.88 = k*(0.006)

We could drop the negative sign because we really just want the magnitude of the spring constant.

K = 980N

Can you help me please! Love you​

Answers

Answer:

I think its B. wait...U love ME?????

which produces wave particles that move and displace one another

Answers

Answer:

a guitar?

Explanation:

Add the following vectors:

(a) (12, 5) + (6, 3)
(b) (−3, 8) + (6, −2)
(c) (3, 8, −7) + (7, 2, 17)
(d) (a, b, c) + (d, e, f)

Answers

Answer:

a. (18,8)

b. (3, 6)

c. (10, 10, 10)

d. (a+d, b+e, c+f)

Give me brainliest for this... Thanks

a hole is punched at a height h in the side of a container of height h0. The container is full of water. If the water is to shoot as far as possible horizontally, (a) how far from the bottom of the container should the hole be punched? (b) Neglecting frictional losses, how far (initially) from the side of the container will the water land?​

Answers

a) the hole needs to be as close to the bottom as possible for maximum horizontal projection.

b) not sure there is enough information to answer that. It depends where the hole is.

A bus rolls to a stop along a horizontal road without the driver applying the brakes,
What answer choice BEST explains why this occurred?
A. The natural state of the bus is not to be in motion.
B. The bus ran out of momentum.
C. The force of gravity slowed the bus until it stopped.
D. The opposing force of friction stopped the train.

Answers

Answer:

should be d because friction allows things to go faster or slower

It’s opinion a I’m a 100%

need help ASAP. please and thank you ​

Answers

I believe the correct answer is 9

Emmy kicks a soccer ball up at an angle of 45° over a level field. She watches the ball's trajectory and notices that it lands, two seconds after being kicked, about 20 m away to the north. Assume that air resistance is negligible, and plot the horizontal and vertical components of the ball's velocity as a function of time. Consider only the time that the ball is in the air, after being kicked but before landing. Take "north" and "up" as the positive x ‑ and y ‑directions, respectively, and use g≈10 m/s2 for the downward acceleration due to gravity.

Answers

Answer:

v_y = 10 - 10t

v_x = 10 m/s

Explanation:

This is a projectile launch where the x axis and y axis will be treated independently.

Now, towards the north on the x-axis, there will be no acceleration and so the speed is constant

So, vₓ = v₀ₓ

Whereas, on the vertical y - axis, the acceleration due to gravity with be negative since it's in a downward direction.

Thus, the equation is;

v_y  =  v_oy - gt

Now, the initial velocity component will be;

cos 45 = v₀ₓ/v₀

And sin 45 = v_₀y/v₀

Thus, we have;

v₀ₓ = v₀(cos 45)

Also, v_oy = v₀(sin 45)

Now, the initial velocity would be gotten from the equation of range which is;

R = (v₀² × sin 2θ)/g

Making v₀ the subject, we have;

v₀ = √(Rg/sin 2θ)

We are given;

R = 20 m

g = 10 m/s²

θ = 45°

Thus;

v₀ = √[20 × 10/(sin (2 × 45))]

v₀ = √200

v₀ = 14.14 m/s

Thus;

v₀ₓ = 14.14(cos 45) = 10 m/s

v_oy = 14.14(sin 45) = 10 m/s

Earlier we saw that;

v_y  =  v_oy - gt

Thus;

v_y = 10 - 10t

Also,we saw that;

vₓ = v₀ₓ

Thus;

v_x = 10 m/s

For the graph, we will use times of  t = 0, 0.2, 0.4, 0.6, 0.8, 1.0, 1.2

Thus, for each of those values of t, we will have the following values of v_oy

t (s)       v_oy (m / s)

0           10

0.2         8

0.4          6

0.6         4

0.8          2

1.0         0

1.2          -2

Graph is attached

a leaky faucet is dripping at a rate of 1 pint per hour how many hours to fill 10 gallons

Answers

Answer:

80 hours :)))))))))))))


A ball is thrown upward in the air with an initial velocity of 40 m/s. How long does it take to
reach back to the point it was thrown from?

Answers

Answer:

You need the definition of acceleration (a=Vf-Vi/t) and 1 equation of linear motion (deltaX = Vi×t + 1/2×a×t^2). Since you know a is constant (gravity) and you know your initial Vi to be 40 m/s and your final velocity Vf to be zero (maximum height), then you can use thhe definition of acceleration to find time.

-9.81m/s^2 = (0-40m/s)/t

t = (-40)/(-9.81) s

t = 4.077s

Now that you have time, you should know all but deltaX in the equation of linear motion.

dX = (40m/s)(4.077s) + (1/2)(-9.81m/s^2)(4.077s)^2

dX = (163.099m) — (81.549m)

dX = 81.55m

1) A rigid tank contains 2 kg of 134a refrigerant at 800 kPa and 120°C. Determine tank volume and total internal energy.

Answers

Answer:

V = 0.07525 [m³]

U  = 655.74 [kJ]

Explanation:

To solve this problem we must use the superheated refrigerant table for refrigerant 134a. The attached image shows the specific volume and specific internal energy values for a pressure of 800 [kPa] and a temperature of 120 [°C].

m = mass =2 [kg]

the specific volume = v = 0.037625 [m³/kg]

The volume of the tank can be found using the following expression:

V = v*m

V = 0.037625*2 = 0.07525 [m³]

The Specific internal energy = u = 327.87 [kJ/kg]

U = u*m

U = 327.87*2 = 655.74 [kJ]

A rubber cord catapult has cross-sectional area
25mmand initial length of rubber cord is 10c.
Its is stretched to 5cm and then released to
project a missile of mass 5gm. Taking
Yubber = 5x108N/m² velocity of projected
missile is :
(1) 20ms -
(2) 100ms
(3) 250ms
(4) 200ms)​

Answers

Potential energy stored in the rubber cord catault will be converted into kinetic energy of mass
2
1

mv
2
=
2
1


L
YAl
2



where l=5×10
−2
m, A=25×10
−6
m
2
, L=10×10
−2
m, m=5×10
−3
kg
⇒v=
mL
YAl
2





v=
5×10
−3
×10×10
−2

5×10
8
×25×10
−6
×(5×10
−2
)
2





v=250ms
−1

Why is it important to warm up your muscles?
Warming up the muscles increases lactic acid build up
Warming up the muscles increases temperature and flexibility of your muscles Warming up the muscles increases your risk of injury
All of the above

Answers

Answer: Warming up the muscles increases temperature and flexibility of your muscles
Hey :)

The answer would be

B. Warming up the muscles increase temperature and flexibility of your muscles.

Because, lactic acid buildup is from overexerting yourself when working out, and warming up muscles does not increase your risk in injury, rather, it decreases your risk of injury

Hope this helps!

Select the correct answer.
Which scientist discovered the relationship between electricity and magnetism?
OA.
Nikola Tesla
OB
Alessandro Volta
OC.
Hans Christian Oersted
OD
Isaac Newton

Answers

Answer:

Hans Christian Oersted

Explanation:

A sled of mass m is coasting at a constant velocity on the ice covered surface of a lake. Three birds, with a combined mass 0.5m, gently land at the same time on the sled. The sled and birds continue sliding along the original direction of motion. How does the kinetic energy of the sled and birds compare with the initial kinetic energy of the sled before the birds landed

Answers

Complete Question

A sled of mass m is coasting at a constant velocity on the ice covered surface of a lake. Three birds, with a combined mass 0.5m, gently land at the same time on the sled. The sled and birds continue sliding along the original direction of motion. How does the kinetic energy of the sled and birds compare with the initial kinetic energy of the sled before the birds landed?

a) The final kinetic energy is one half of the initial kinetic energy.

b) The final kinetic energy is one third of the initial kinetic energy.

c) The final kinetic energy is one quarter of the initial kinetic energy.

d) The final kinetic energy is one ninth of the initial kinetic energy.

e) The final kinetic energy is equal to the initial kinetic energy

Answer:

The correct option is b

Explanation:

From the question we are told that

   The mass of the sled is  m  

   The  mass of the three birds is  [tex]m_b = 0.5 m[/tex]

Generally from the law of momentum conservation,

  The initial momentum of the boat  =  final  momentum of the boat

Hence

     [tex]m * v = (m_b+ m) * v_2[/tex]

=>  [tex]m v = (0.5m+ m) * v_2[/tex]

=>  [tex]m v = 1.5m* v_2[/tex]

Here v is the velocity of the boat before the birds landed and [tex]v_2[/tex] is the velocity after the birds landed

So

       [tex]v_2 = \frac{2}{3} v[/tex]

Generally the initial  velocity of the boat before the birds landed is mathematically represented as

      [tex]K_i = \frac{1}{2} * m * v ^2[/tex]

Generally the final  velocity of the boat when the birds have landed is mathematically represented as

      [tex]K_f = \frac{1}{2} * (m_b + m ) * v_2^2[/tex]

=>   [tex]K_f = \frac{1}{2} * (0.5m + m ) * (\frac{2}{3} v)^2[/tex]

=>  [tex]K_f = \frac{1}{2} * 1.5m * (\frac{2}{3} v)^2[/tex]

=>  [tex]K_f = \frac{1}{2} * 1.5m * \frac{4}{9} v^2[/tex]

=>  [tex]K_f = \frac{1}{2}m v^2 * \frac{1}{3}[/tex]

Comparing this equation with that of the initial  kinetic energy

=>  [tex]K_f = \frac{1}{3} K_i[/tex]      

The kinetic energy of the sled and birds is one-third the initial kinetic energy of the sled before the birds landed.

What is kinetic energy?

When an object is in motion, then the energy possessed by the object at the state of motion is known as its kinetic energy.

Given data -

The combined mass of three birds is, M = 0.5m.

Let m be the mass of the sled. Then applying the conservation of linear momentum as,

The initial momentum of the boat  =  final  momentum of the boat

mv = (M + m)v'

v is the velocity of the boat before the birds landed and v' is the velocity after the birds landed.

mv = (0.5m + m)v'

mv = 1.5mv'

v = 3/2 v'

or

v' =2/3v

The initial kinetic energy of the boat before the birds landed is mathematically represented as

[tex]K_{1}= \dfrac{1}{2}mv^{2}[/tex]

And the final kinetic energy of the boat when the birds have landed is mathematically represented as,

[tex]K_{2}=\dfrac{1}{2}(M+m)v'^{2}\\\\K_{2}=\dfrac{1}{2}(1.5m) \times 4/9v^{2}\\\\K_{2}=\dfrac{1}{3} \times \dfrac{1}{2}mv^{2}\\\\K_{2}=\dfrac{1}{3} \times K_{1}[/tex]

Thus, we can conclude that the kinetic energy of the sled and birds is one-third the initial kinetic energy of the sled before the birds landed.

Learn more about kinetic energy here:

https://brainly.com/question/999862

What is called mass per unit

volume of a substances? | ककसी पदाथष के

द्रव्यमान प्रतत इकाई आयतन को क्या कहते हैं?

A : Mass | द्रव्यमान

B : Weight | भार

C : Density | घनत्व

D : Volume | आयतन

Ans:
C : Density | घनत्व​

Answers

Answer:

Density

Explanation:

The definition of density of a substance is the quotient between its mass and its volume. Such results in the mass per unit of volume.

Which of the following choices is not part of the scientific method

Answers

Answer:

What are the choices?

Explanation:

A projectile is fired into the air at an angle of 50° above ground level and hits a target downrange. Neglecting air drag, it will also hit the target if fired at the same speed at an angle of

Answers

Answer:

18 m/s

Explanation:

Range of a projectile on level ground is:

R = v₀² sin(2θ) / g

14.3 m = v₀² sin(2×13°) / 9.8 m/s²

v₀ = 17.9 m/s

Rounded to two significant figures, the launch speed was 18 m/s.

If the bullet is launched at an angle of 50 degrees above ground level, the target will be struck. The angle remains the same. The launch angle obtained is 50 degrees.

Given:

The initial shot was fired at an angle of 50 degrees above ground.

The projectile's starting velocity (v) and magnitude of velocity will remain constant if it is shot at the same pace.

Let the angle of the projectile is x,

The horizontal component of velocity can be calculated as follows:

[tex]v(x) = v * cos(x)[/tex]

We can write:

since the horizontal part of velocity remains constant:

[tex]v(x1) = v(x2)[/tex]

[tex]cos(50) = cos(x)[/tex]

[tex]50 = x[/tex]

Therefore, if the projectile is launched at the same speed at a 50° angle above ground level, it will strike the target.

To know more about the projectile:

https://brainly.com/question/13388411

#SPJ4

The correct response is given when the angle is asked a question.

(DUE IN FIVE MINUTES, QUICK)

Explain why your weight would change if you went to the moon, but your mass wouldn’t.

Answers

The moon's gravitation force is determined by the mass and the size of the moon. Since the moon has significantly less mass than the Earth, it will not pull objects toward itself at the strength that Earth will.

Other Questions
Which shows one way the equation can be represented in words? Z-6=14 A.The dfference of a number and z is the same as one and four-tenths. B.Anumber subtracted from one and four-tenths is equal to six.C.Six less than a number is the same as one and four-tenths. D.Sx decreased by a number is equal to one and four-tenths. Can someone help me with this problem and give the answer how many stanzas does this poem have? HELPPP ASAP PLSSS!!! (HELP ASAP)The map shows disputed territory in Louisiana during the 1810s.Which area was annexed by the United States after the 1810 revolt and later added to Louisiana?Mississippi TerritorySpanish Texasdisputed territory in the eastdisputed territory in the west Which statement best describes the government of Russia in 20th century Until the middle of the 20th century, doctors sometimes suggested thatpeople smoke in order to reduce stress. Since then, doctors have been askingpatients who smoke to quit.What caused this change? A. Studies have shown that tobacco and tar in cigarettes havenegative health effects.B. Tobacco is an illegal drug, and doctors are required to discourageits use.C. Tobacco is a nonrenewable resource, and the government hasrestricted its use.D. Tobacco plants have been categorized as an endangered species, The ultimate goal of operations management is to provide high-quality goods and services instantaneously in response to customer demand. Over the years, low cost often came at the expense of quality and flexibility. Furthermore, suppliers didn't always deliver when they said they would, so manufacturers had to carry large inventories of raw materials and components to keep producing. Such inefficiencies made U.S. companies vulnerable to foreign competitors who were using more advanced production techniques As a result of new global competition, companies have had to make a wide variety of high-quality custom-designed products at a very low cost. Something had to change on the production floor to make that possible. Several major developments have made U.S.companies more competitive: (1) computer-aided design and manufacturing (2) flexible manufacturing, (3) lean manufacturing, and (4) mass customization, (5) CAD(6) CAMMatch the company or role with the most appropriate manufacturing technique. Dress designer: In addition to helping in the design of products, the use of this system allows designers to work in three dimensions Shoe designer: The manufacturer programs the computer to make a simple design change, and then that change is readily Incorporated into production Purse designer: Software programs unite these two computer-aided support systems. While the software is expensive, it cuts as much as 80 percent of the time needed to program machines to make parts. Motor starters: Orders come in daily and, within 24 hours, the company's machines and robots manufacture, test, and package the starters-which are untouched by human hands. This system is so efficient it can even accommodate a special order (even a single item) in the assembly without slowing down the process. Toyota corporation: This company utilizes the strategy of using half the human effort, halving the defects in the finished product, using one-third of the normal engineering effort, using half the floor space, and carrying 90 percent less inventoryDell computers: Dell has set up its manufacturing process so that all its computers can be quickly assembled to individual customer orders. uy?8,251; 8,125; 8,512So,What is the answer I dont know it Question 20 of 66Which of the following species has the same number of protons as Fe3+?A) Mn3+B) Co2+C) Fe2+D) NitE) CO3+ Why do boys hate me so much??? I just want to know. What is the exact distance from (5, 1) to (3, 0)? (-12x^8 2v) - 11x^8 -11-3x=44Can someone help me with this please? Suppose a scientist developed a hypothesis stating that a certain substance slowed down the growth of chili pepper plants. Briefly describe a controlled experimentthe scientist could conduct to test the hypothesis. Identify the controlled variables, the independent variable(s), and the dependent variable(s). What does Lincoln mean by A house divided against itself cannot stand?PLEASE HELP!! PLEASE HELP I AM BEING TIMED!!!Statment: Find the value of x that makes Line U and line V and parallel.Options: 2 6 8 4 Who had the most successful Anglo-American colony in Texas? when four consecutive numbers are added the sum is 46 find the integers plss anyone help me Whom did Hitler blame for Germanys defeat in World War I?(please help! whoever answers can the question correctly will become the brainliest)