the volume of a gas is proportional to the temperature of a gas is known as avogadro's law. ideal gas law. charles's law. boyle's law. dalton's law.

The solubility of [tex]AgCl[/tex]in a solution that is 0.130 M in [tex]NH3[/tex] is 1.3 × 10⁻⁵ M.

To calculate the solubility of silver chloride ([tex]AgCl[/tex]) in a solution that is 0.130 M in [tex]NH3[/tex], we need to use the following equilibrium reaction:

[tex]AgCl(s)[/tex]+ [tex]2 NH3(aq)[/tex]  ⇌ [tex]Ag(NH3)2+(aq) + Cl-(aq)[/tex]

The equilibrium constant for this reaction is called the formation constant of [tex]Ag(NH3)2[/tex]+ and has a value of Kf = 1.6 × 107.

To solve this problem, we need to use the equation for the formation constant:

[tex]Kf = [Ag(NH3)2+][Cl-]/[AgCl][NH3]2[/tex]

We can rearrange this equation to solve for the solubility of [tex]AgCl[/tex]:

[tex][AgCl] = [Ag(NH3)2+][Cl-]/(Kf[NH3]2)[/tex]

Substituting the values given in the problem, we have:

[[tex]AgCl[/tex]] = (x)(0.130)/(1.6 × 107 × 0.1302)

where x is the concentration of [tex]Ag(NH3)2[/tex]+ and [tex]Cl-[/tex] ions at equilibrium.

Solving for x, we get:

x = 1.3 × 10⁻⁵ M

Therefore, the solubility of [tex]AgCl[/tex]in a solution that is 0.130 M in NH3 is 1.3 × 10⁻⁵ M.

Learn more about solubility

brainly.com/question/28170449

#SPJ11

The HCl reacts with the fluoride ion (F⁻) present in the buffer solution to maintain the pH of the solution. Option A is correct.

The buffer solution is a mixture of hydrofluoric acid (HF) and its conjugate base, fluoride ion (F⁻), so the HCl will react with the F⁻ ion to maintain the pH of the solution.

The reaction that occurs when HCl is added to the buffer solution is;

HCl + F⁻ → HF + Cl⁻

The HCl reacts with the F⁻ ion to form HF and Cl⁻, which shifts the equilibrium of the buffer solution towards HF. This means that some of the F⁻ ions are converted into HF molecules, which helps to maintain the pH of the solution.

The buffer solution resists changes in pH because it contains a weak acid and its conjugate base, which can react with any added acid or base to prevent large changes in the concentration of H₃O⁺ or OH⁻ ions in the solution.

Hence, B. is the correct option.

To know more about buffer solution here

https://brainly.com/question/30332096

#SPJ4

--The given question is incomplete, the complete question is

"A solution is prepared by dissolving 0.26 mol of hydrofluoric acid and 0.23 mol of sodium fluoride in water sufficient to yield 1.00 L of solution. The addition of 0.05 mol of HCl to this buffer solution causes the pH to drop slightly. The pH does not decrease drastically because the HCl reacts with the ________ present in the buffer solution. The Ka of hydrofluoric acid is 6.8 × 10-4. A) fluoride ion B) H₂O C) hydrofluoric acid D) H₃O⁺"--

In these circumstances, the rate of enzyme activity would be 2.74 units per second. Depending on the exact assay used to evaluate the reaction, the units of enzyme activity will vary.

As an inverse measure of affinity, this is typically written as the enzyme's Km (Michaelis constant). In real life, the substrate concentration at which the enzyme may achieve half of Vmax is known as Km. Consequently, the reaction's Vmax increases as the amount of enzyme increases.

(V = Vmax * [S] / (Km + [S])

where [S] is the concentration of the substrate, [V] is the rate of enzyme activity, [Vmax] is the maximum rate of the enzyme-catalyzed reaction, and [Km] is the Michaelis constant.

Substituting the given values:

V = 96 * 6.2 / (12 + 6.2)

V = 49.92 / 18.2

V ≈ 2.74

To know more about reaction visit:-

https://brainly.com/question/28984750

#SPJ1

Carbonic acid, H2CO3, is a diprotic acid with two dissociation constants: Ka1 =[tex]4.2 x 10^-7[/tex] and Ka2 = [tex]4.7 x 10^-11[/tex]. The pH of a 0.080 M solution of carbonic acid is found to be 7.40.

Let's denote the concentration of H2CO3 as [H2CO3], the concentration of HCO3- (the first deprotonated form) as [HCO3-], and the concentration of CO32- (the second deprotonated form) as [CO32-]. At equilibrium, the following relationships hold: [H2CO3] = [H+] + [HCO3-] [HCO3-] = [H+] + [CO32-]

We also know that the total concentration of carbonic acid is 0.080 M, so: [H2CO3] + [HCO3-] + [CO32-] = 0.080 M. At equilibrium, the ratio of [HCO3-]/[H2CO3] is given by the dissociation constant Ka1: Ka1 = [H+][HCO3-]/[H2CO3]

Since Ka1 is small compared to the initial concentration of carbonic acid, we can assume that x (the concentration of H+) is much smaller than the initial concentration of H2CO3. Therefore, we can approximate[H2CO3] ≈ 0.080 M [HCO3-] ≈ x [CO32-] ≈ 0

[tex]x = Ka1[H2CO3]/([H2CO3] + Ka1) = (4.2 x 10^-7)(0.080 M)/(0.080 M + 4.2 x 10^-7) ≈ 3.97 x 10^-8 M[/tex]The pH is given by: pH = -log[H+] We can use the relationship between [H+] and x to calculate the pH: [tex][H+] ≈ x = 3.97 x 10^-8 M, pH = -log(3.97 x 10^-8) ≈ 7.40.[/tex]

Therefore, the pH of a 0.080 M solution of carbonic acid is approximately 7.40.

Know more about diprotic acid  here:

https://brainly.com/question/9434046

#SPJ11

The pressure in a 28.0-L cylinder filled with 32.2 g of oxygen gas at a temperature of 334 K is 0.985 atm.

To find the pressure in the cylinder, we can use the Ideal Gas Law equation: PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

First, we need to convert the mass of oxygen gas to moles. The molar mass of oxygen gas (O₂) is 32.0 g/mol.

n = (32.2 g) / (32.0 g/mol) = 1.006 mol

Now, we have all the necessary information to solve for the pressure (P). The volume (V) is 28.0 L, the number of moles (n) is 1.006 mol, the ideal gas constant (R) is 0.0821 L·atm/mol·K, and the temperature (T) is 334 K.

PV = nRT
P(28.0 L) = (1.006 mol)(0.0821 L·atm/mol·K)(334 K)
P = (1.006 mol × 0.0821 L·atm/mol·K × 334 K) / 28.0 L

P = 0.985 atm

So, the pressure in the cylinder is 0.985 atm, expressed to three significant figures with the appropriate units.

Learn more about Ideal Gas Law here: https://brainly.com/question/27870704

#SPJ11

To solve this problem, we can use the Henderson-Hasselbalch equation, which relates the pH of a buffer solution to the pKa and the ratio of the concentrations of the conjugate acid [tex]pH = pKa + log([A-]/[HA])[/tex]. he pH of the resulting buffer is 4.90

First, we need to determine the concentrations of the weak acid (HA) and its conjugate base (A-) after mixing with NaOH. This is a neutralization reaction, and the number of moles of NaOH added is equal to the number of moles of H+ in the weak acid: moles H+ = (0.615 L)(0.250 mol/L) = 0.154 mol H+

To neutralize this amount of H+, we need the same amount of OH-, which can be calculated using the concentration and volume of the NaOH solution: moles OH- = (0.500 L)(0.170 mol/L) = 0.085 mol OH-

The concentration of the weak acid and its conjugate base can be calculated using the volumes of the solutions and the moles of each species: [HA] = moles HA / total volume = 0.109 mol / (0.615 L + 0.500 L) = 0.107 M

[A-] = moles A- / total volume = 0.085 mol / (0.615 L + 0.500 L) = 0.083 M Now we can use the Henderson-Hasselbalch equation to find the pH of the buffer: [tex]pH = pKa + log([A-]/[HA])[/tex]

[tex]pH = -log(8.93×10^-5) + log(0.083/0.107)[/tex]

pH = 4.90

Therefore, the pH of the resulting buffer is 4.90

Know more about conjugate acid here:

https://brainly.com/question/31229565

#SPJ11

Fe3+ cannot oxidize I- to I2 under standard-state conditions.

Under standard-state conditions, Fe3+ has a standard reduction potential of +0.77 V, while I- has a standard reduction potential of -0.54 V. Since the reduction potential of Fe3+ is greater than that of I-, Fe3+ has a greater tendency to be reduced than I-.

To explain further, for a redox reaction to occur, the reducing agent must have a higher reduction potential than the oxidizing agent. In this case, Fe3+ is the oxidizing agent and I- is the reducing agent. However, since the reduction potential of Fe3+ is higher than that of I-, Fe3+ cannot oxidize I- to I2.

For more such questions on Oxidize.

https://brainly.com/question/14056062#

#SPJ11

We can use the relationship between the pH, pOH, and Kb of a weak base:

Kb = (1.0 x 10^-14) / (OH^-)^2

First, we need to find the pOH of the solution, which is:

pOH = 14.00 - pH = 14.00 - 9.42 = 4.58

Next, we can find the concentration of hydroxide ions in the solution using the equation for the dissociation of water:

Kw = [H+][OH-] = 1.0 x 10^-14

[OH-] = Kw / [H+] = 1.0 x 10^-14 / 10^-9.42 = 3.98 x 10^-6 M

Now we can substitute these values into the Kb equation to solve for Kb:

Kb = (1.0 x 10^-14) / (3.98 x 10^-6)^2 = 6.29 x 10^-10

Therefore, the Kb of the unknown weak base is 6.29 x 10^-10.

Visit here to learn more about dissociation brainly.com/question/30961097

#SPJ11

The pKa of the unknown weak acid is 5.8.

To find the pKa of the unknown weak acid, we need to use the Henderson-Hasselbalch equation:

pKa = pH + log([A-]/[HA])

Where [A-] is the concentration of the conjugate base and [HA] is the concentration of the acid.

Since the solution is weak, we can assume that the majority of the acid has not dissociated and that [HA] ≈ [H+] ≈ 10^-8.1.

The concentration of the conjugate base [A-] can be calculated using the acid dissociation constant (Ka):

Ka = [H+][A-]/[HA]

Therefore, [A-] = Ka/[H+] = 10^-14/Ka

Substituting these values into the Henderson-Hasselbalch equation:

pKa = 8.1 + log(10^-14/Ka / 10^-8.1)

pKa = 8.1 - log(Ka) + log(10^6.9)

pKa = 14 - 8.1 + log(10^6.9) = 5.8

Therefore, the pKa of the unknown weak acid is 5.8.

Learn more about acid here:

https://brainly.com/question/14072179

#SPJ11

It is unlikely to see an α-helix containing only Arg, Lys, Met, Phe, Trp, Tyr, and Val, due to the unfavorable interactions and steric hindrance caused by the combination of charged and bulky side chains.

An α-helix is a common secondary structure found in proteins, where a single polypeptide chain coils into a right-handed helix. The helix is stabilized by hydrogen bonds between the carbonyl group of one amino acid residue and the amide group of an amino acid residue four residues away.

Arginine (Arg) and lysine (Lys) are positively charged amino acids with bulky side chains, while methionine (Met), phenylalanine (Phe), tryptophan (Trp), tyrosine (Tyr), and valine (Val) are nonpolar amino acids.

The bulky and charged side chains of Arg and Lys would create steric hindrance and repulsion within the helix, making it difficult to form and stabilize the helical structure. The presence of multiple bulky and charged residues in close proximity could also disrupt the hydrogen bonding between the amino acid residues, further destabilizing the helix.

learn more about protein here:

https://brainly.com/question/30434429

#SPJ11

1.43 g of solid sodium acetate is required to prepare a buffer solution with a pH of 4 when mixed with 100.0 ml of 0.1 M acetic acid.

To prepare a buffer of pH 4, we need to use the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

where pH is the desired pH, pKa is the acid dissociation constant of acetic acid, [A-] is the concentration of the acetate ion, and [HA] is the concentration of undissociated acetic acid.

Rearranging the equation gives:

[A-]/[HA] = 10[tex]^(pH - pKa)[/tex]

Substituting the values:

[A-]/[HA] = 10(4 - (-log10(1.8⋅10⁻⁵))) = 1.74

The ratio of [A-]/[HA] is equal to the ratio of their masses, so we can use this ratio to calculate the mass of solid sodium acetate required to prepare the buffer.

The molar mass of sodium acetate is 82.03 g/mol. We can assume that the volume of the solution remains constant after adding the solid sodium acetate. Therefore, the moles of acetic acid initially present in the solution will be equal to the moles of acetic acid and acetate ion in the buffer solution:

0.1 mol/L x 0.1 L = 0.01 mol acetic acid

Since [A-]/[HA] = 1.74, the concentration of acetate ion is:

[A-] = 1.74 x [HA] = 1.74 x 0.1 M = 0.174 M

The moles of acetate ion required in the buffer solution can be calculated as:

moles of acetate ion = [A-] x volume of buffer solution

= 0.174 M x 0.1 L

= 0.0174 mol

The mass of sodium acetate required can be calculated as:

mass = moles x molar mass

= 0.0174 mol x 82.03 g/mol

= 1.43 g

Therefore, 1.43 g of solid sodium acetate is required to prepare a buffer solution with a pH of 4 when mixed with 100.0 ml of 0.1 M acetic acid.

Learn more about sodium acetate ,

https://brainly.com/question/12924347

#SPJ4

When the pressure (P) and temperature (T) are constant, the volume (V) constituting an ideal gas (n) directly varies with the amount of moles constituting the gas (n).

A measurement of three-dimensional space is volume. It is frequently expressed quantitatively using SI-derived units, like the cubic metre or litre, or different imperial or US-standard units, including the gallon, quart and cubic inch. Volume and length (cubed) have a symbiotic relationship.

The volume of an item is typically thought of as its capacity, not as the amount of space it takes up. In other words, the volume is the quantity of fluid (liquid or gas) that the container may hold. When the pressure (P) and temperature (T) are constant, the volume (V) constituting an ideal gas (n) directly varies with the amount of moles constituting the gas (n).

To know more about volume, here:

https://brainly.com/question/23477586

#SPJ1

If the concentration of N2 is decreased, the equilibrium position of the reaction will shift towards the side with more N2 to compensate. In this case, the reaction will shift towards the side with more NH3 and H2. Therefore, the concentration of NH3 and H2 will increase, while the concentration of N2 will decrease.

Based on the reaction 3 H₂(g) + N₂(g) ⇌ 2 NH₃(g), if the concentration of N₂ is decreased at equilibrium, the reaction will shift to the left to re-establish equilibrium. As a result, the concentration of H₂ will increase, and the concentration of NH₃ will decrease. This follows Le Chatelier's principle, which states that if a change is made to a system at equilibrium, the system will adjust to counteract the change and re-establish equilibrium.

Learn more about H₂ here: brainly.com/question/28937951

#SPJ11

The heat liberated when 88.57 grams of methane are burned is -4,909.2 kJ, or approximately -4,910 kJ (rounded to three significant figures).

To solve this problem, we need to first balance the chemical equation:

CH4 + 2O2 ⟶ CO2 + 2H2OΔH=−890.0kJ

Now, we can use stoichiometry to calculate the amount of heat liberated when 88.57 grams of methane are burned. First, we need to convert the mass of methane to moles:

88.57 g CH4 × (1 mol CH4/16.04 g CH4) = 5.52 mol CH4

Next, we can use the balanced equation to determine the mole ratio between CH4 and ΔH:

1 mol CH4 : -890.0 kJ

So, the heat liberated when 5.52 mol CH4 are burned is:

5.52 mol CH4 × (-890.0 kJ/1 mol CH4) = -4,909.2 kJ

However, the question asks for the heat liberated when 88.57 grams of methane are burned. To convert from moles to grams, we can use the molar mass of CH4:

5.52 mol CH4 × (16.04 g CH4/1 mol CH4) = 88.57 g CH4

For more about heat liberated:

https://brainly.com/question/16557142

#SPJ11

To draw the unique Lewis isomers for C4H10O, we first need to determine the possible bonding arrangements and molecular shapes for this molecular formula.

C4H10O can have either an alcohol functional group (-OH) or an ether functional group (-O-) attached to a carbon chain.

If C4H10O has an alcohol functional group, it would have the molecular formula C4H10O + 1 (for the added hydrogen). This would result in the molecule being a primary alcohol with the formula CH3CH2CH2CH2OH.

On the other hand, if C4H10O has an ether functional group, it would have the molecular formula C4H10O, and the oxygen atom would be attached to one of the carbon atoms in the chain.

Using these two possibilities, we can draw the following unique Lewis isomers for C4H10O:

1. CH3CH2CH2CH2OH (primary alcohol)
2. CH3CH2CH(OH)CH3 (secondary alcohol)
3. CH3CH(OH)CH2CH3 (secondary alcohol)
4. CH3CH2OCH2CH3 (ether)

These are all the unique Lewis isomers that can be drawn for C4H10O.

To know more about Lewis isomers click here:

https://brainly.com/question/29752342

#SPJ11

The change in entropy for the vaporization of ethanol is approximately 109.8 J/mol·K.

To calculate the change in entropy (ΔS) for the vaporization of ethanol, we will use the formula:
ΔS = ΔHvap / T Where ΔHvap is the enthalpy of vaporization, and T is the temperature in Kelvin.
Given:
ΔHvap = 38.6 kJ/mol
Boiling point = 78.3 °C
First, convert the boiling point to Kelvin:
T = 78.3 + 273.15 = 351.45 K
Now, plug the values into the formula:
ΔS = (38.6 kJ/mol) / (351.45 K)
Since 1 kJ is equal to 1000 J, we need to convert kJ to J:
ΔS = (38.6 * 1000 J/mol) / (351.45 K)
ΔS = 38600 J/mol / 351.45 K
ΔS ≈ 109.8 J/mol·K

To learn more about entropy click here https://brainly.com/question/13999732

#SPJ11

The co-existence curve s/l, also known as the solid-liquid coexistence curve, represents the phase equilibrium between a solid and a liquid at various temperatures and pressures. The slope of this curve can provide important information about the thermodynamic properties of the system.

Typically, the slope of the co-existence curve s/l is positive, indicating that the melting temperature of the solid increases as pressure increases. However, since you have specified that the substance in question is not water, it is important to consider the specific properties of the material.

The slope of the co-existence curve s/l can depend on factors such as the crystal structure of the solid, the intermolecular forces between the solid and liquid phases, and the molecular size and shape of the substance. For example, some materials may exhibit negative slopes, indicating that the melting temperature decreases as pressure increases.

Therefore, without further information about the substance in question, it is difficult to determine the exact slope of the co-existence curve s/l. It is important to note that the slope can vary significantly between different materials, and can provide valuable insight into their thermodynamic behavior.

to know more about The co-existance curve   click this link-

brainly.com/question/14449559

#SPJ11

Since NO2 possesses one unpaired electron on the nitrogen atom, giving it a total of 17 valence electrons, it defies the octet rule.

Because SF4 has 34 valence electrons and each atom contains an entire octet of electrons, it complies with the octet rule.

Because BF3 has 24 valence electrons and each atom contains an entire octet of electrons, it complies with the octet rule.

XeF2, which possesses two unpaired electrons on the xenon atom and a total of 22 valence electrons, defies the octet rule.

Because CO2 has 16 valence electrons and each atom contains an entire octet of electrons, it complies with the octet rule.

Except for hydrogen, which has a complete valence shell with two electrons, atoms often form molecules with complete valence shells of eight electrons each, according to the octet rule. The octet rule can be broken when there are too few valence electrons or when there are more valence electrons than the required eight. The nitrogen atom in NO2 possesses an unpaired electron, resulting in an odd number of valence electrons and an insufficient octet. Two unpaired electrons on the xenon atom in XeF2 result in an incomplete octet. Both SF4 and BF3 have an atom with a fully completed valence shell of eight electrons, which satisfies the octet rule. CO2 has a full octet on it.

learn more about  octet rule here:

https://brainly.com/question/865531

#SPJ11

2-methyl propanoic acid and butanoic acid are both structural isomers.

2-methyl propanoic acid and bunaoic acid have the same molecular formula (C₄H₈O₂), but their atoms are arranged differently in their chemical structure. Specifically, 2-methyl propanoic acid has a methyl group (CH₃) attached to the second carbon in the chain, while butanoic acid has a straight carbon chain with no branches. This difference in structure can affect their physical and chemical properties, such as boiling point and reactivity.

Learn more about propanoic acid: https://brainly.com/question/28494966

#SPJ11

The solubility of AgCl in a 0.154 M NaCl solution is approximately 1.17 x 10⁻⁹ M.

The solubility of AgCl in a 0.154 M NaCl solution can be determined using the Ksp value and the common ion effect. Given the Ksp of AgCl is 1.8 x 10⁻¹⁰, we can write the solubility product expression as:

Ksp = [Ag+][Cl-]

Since NaCl is a strong electrolyte, it dissociates completely in solution, providing a [Cl-] of 0.154 M. Let the solubility of AgCl be represented by 'x'. Thus, the concentration of Ag+ in the solution is 'x'. Considering the common ion effect, the expression becomes:
1.8 x 10⁻¹⁰ = x(0.154)

Solving for x:
x = (1.8 x 10^-10) / 0.154 ≈ 1.17 x 10⁻⁹ M

Learn more about  ion effect at https://brainly.com/question/28299781

#SPJ11

The result of treating pyrrole with a solution of nitric and sulfuric acids at zero degree temperature is 2-nitropyrrole.

Step 1: Pyrrole protonation:

To create the pyrrole cation, sulfuric acid protonates the pyrrole nitrogen.

Nitric Acid Attack in Step 2:

Nitric acid attacks the pyrrole cation at the 2-position by acting as an electrophile.

Production of the Nitronium Ion in Step 3:

The sulfuric acid subsequently protonates the nitric acid, resulting in the formation of the nitronium ion ([tex]NO^{+} _{2}[/tex]).

Electrophilic Aromatic Substitution, the fourth step:

Being an electrophile, the nitronium ion functions as a replacement at the pyrrole's 2-position.

Deprotonation, at step five:

The ultimate product, 2-nitropyrole, is created when the intermediate is deprotonated by sulfuric acid.

To learn more about reaction mechanism visit:

brainly.com/question/14010810

#SPJ1

The amount of sodium lactate needed to make a pH 4 solution in 100 ml of 0.10 M is 1.1206 grams.

To make a 100 mL solution of 0.10 M sodium lactate with a pH of 4, you will first need to calculate the required amount of sodium lactate in grams. The formula for this calculation is:

grams = moles × molar mass

Sodium lactate has a molar mass of 112.06 g/mol. To find the moles needed for a 0.10 M solution in 100 mL, use the formula:

moles = Molarity × Volume (in Liters)

moles = 0.10 M × (100 mL / 1000 mL/L)

= 0.010 moles

Now, calculate the grams of sodium lactate needed:

grams = 0.010 moles × 112.06 g/mol

= 1.1206 grams

So, you need 1.1206 grams of sodium lactate to make a 100 mL solution with a pH of 4 and a concentration of 0.10 M.

Learn more about sodium lactace: https://brainly.com/question/2274878

#SPJ11

The formal charge on the chlorine atom when it forms one single bond and one double bond to oxygen is +2.

To determine the formal charge on the chlorine atom when it forms one single bond and one double bond to oxygen, we can follow these steps:
1. Draw the resonance structures: In this case, there are two resonance structures. In the first resonance structure, chlorine forms a single bond with one oxygen atom and a double bond with another oxygen atom. In the second resonance structure, the positions of the single and double bonds between chlorine and oxygen atoms are reversed.
2. Calculate the formal charge: The formula for calculating the formal charge is:
Formal Charge = (Valence Electrons of the Atom) - (Non-Bonding Electrons + 1/2 Bonding Electrons)
3. Determine the valence electrons for chlorine: Chlorine is in Group 17, so it has 7 valence electrons.
4. Determine the non-bonding and bonding electrons: In both resonance structures, chlorine forms 1 single bond (2 electrons) and 1 double bond (4 electrons) with oxygen atoms. Thus, chlorine has a total of 6 bonding electrons. There is one lone pair of electrons (2 non-bonding electrons) on the chlorine atom.
5. Apply the formula:
Formal Charge (Cl) = 7 (Valence Electrons) - (2 Non-Bonding Electrons + 1/2 * 6 Bonding Electrons)
Formal Charge (Cl) = 7 - (2 + 3)
Formal Charge (Cl) = 7 - 5
Formal Charge (Cl) = +2

To learn more about formal charge click here https://brainly.com/question/11723212

#SPJ11

Answer:

0.41

Explanation:

-log [.390]

The pH of the solution is 0.41. The pH of the aqueous solution containing 0.390 M HCl at 25.0 °C can be calculated using the formula pH = -log[H+], where [H+] is the concentration of hydrogen ions in the solution. HCl is a strong acid, which means it completely dissociates in water to form H+ and Cl- ions. Therefore, the concentration of H+ ions in the solution is equal to the concentration of HCl, which is 0.390 M.

Using this concentration in the pH formula, we get:

pH = -log(0.390)

pH = 0.41

Therefore, the pH of the aqueous solution containing 0.390 M HCl at 25.0 °C is 0.41.

Learn more about pH here:

https://brainly.com/question/491373

#SPJ11

The common name for the given compound NH₂CH₃ is methylamine.

Methylamine (NH₂CH₃) is an organic compound that belongs to the amine class of compounds. It consists of a methyl group (CH₃) attached to an amine group (NH₂). Methylamine is a colorless gas at room temperature and has a strong odor similar to ammonia.

It is used in various industrial applications, such as the production of pharmaceuticals, pesticides, and solvents. It can be synthesized by reacting methanol with ammonia under high pressure and temperature in the presence of a catalyst.

Due to its basic properties, methylamine can also form salts with various acids, such as hydrochloric acid, which yields methylammonium chloride.

To know more about pharmaceuticals click on below link:

https://brainly.com/question/30134373#

#SPJ11

To produce a buffer with the highest buffer capacity, you need to combine solutions of citric acid (C6H8O7) and sodium citrate (C6H5Na3O7) with equal concentrations and near their pKa values. Citric acid is a triprotic acid with pKa values of 3.13, 4.76, and 6.40. Sodium citrate is the conjugate base.

When citric acid and sodium citrate are combined in equal volumes, they can form a buffer solution with a specific pH value. The buffer capacity of a buffer solution refers to its ability to resist changes in pH when an acid or a base is added to it. The higher the buffer capacity, the more effective the buffer solution is in maintaining a stable pH.

The pKa value is a measure of the acidity or basicity of a compound. Citric acid has three pKa values, which correspond to the three dissociation steps of the acid. They are 3.1, 4.8, and 6.4. Sodium citrate, on the other hand, has only one pKa value, which is around 7.2.


For the highest buffer capacity, choose the combination closest to the pH you want to maintain. For example, if you want a pH around 4.76, combine equal concentrations of citric acid and sodium citrate with pKa value 4.76. This combination will provide the highest buffer capacity at that specific pH.

To know more about concentrations visit :-

https://brainly.com/question/10725862

#SPJ11

The volume of the diluted solution which contains 17.0 g of KNO₃ is approximately 610 mL.

First, we need to find the concentration of the diluted solution.

To do this, we'll use the formula: C₁V₁ = C₂V₂

C₁ = initial concentration (6.6 M)
V₁ = initial volume (50.8 mL)
C₂ = final concentration (unknown)
V₂ = final volume (1.20 L = 1200 mL)

6.6 M × 50.8 mL = C₂ × 1200 mL

After calculating, we find that C₂ (the final concentration) is 0.2755 M.

Next, we need to determine the volume of the diluted solution that contains 17.0 g of KNO₃. We'll use the formula: mass = volume × concentration × molar mass

Molar mass of KNO₃ = 39.1 g/mol (K) + 14.0 g/mol (N) + 3 × 16.0 g/mol (O) = 101.1 g/mol

17.0 g = volume × 0.2755 M × 101.1 g/mol
volume = 0.610 L = 610 mL

Now, we can solve for the volume of the diluted solution that contains 17.0 g of KNO₃. After calculating, the volume is approximately 610 mL.

Learn more about diluted solution here: https://brainly.com/question/27097060

#SPJ11

The equilibrium constant for the given reaction is greater than 1, so K > 1.

The equilibrium constant (K) is a measure of the position of an equilibrium reaction, indicating the relative amounts of reactants and products at equilibrium. It is calculated as the ratio of the products to reactants, each raised to their respective stoichiometric coefficients. In the given reaction, [tex]CH3COO−(aq) + H2O(l) ⇌ CH3COOH(aq) + OH−(aq)[/tex], the products are CH3COOH and OH-, and the reactants are CH3COO- and H2O. Since the reaction involves the production of hydroxide ions, which are the product of the reaction, and the reactants are weak acid and its conjugate base, it is an acid-base reaction. The equilibrium constant (K) for this reaction is greater than 1, indicating that at equilibrium, the products are favored over the reactants.

Learn more about equilibrium constant here:

https://brainly.com/question/10038290

#SPJ11

The concentration of the remaining OH⁻ ions is 0.040 M. When NaOH and HCl react, they form a neutralization reaction, producing water and a salt (NaCl). The balanced chemical equation is:

To find the concentration of the remaining OH- ions, we first need to determine the amount of HCl that reacted with the NaOH.

Using the balanced chemical equation: NaOH + HCl -> NaCl + H2O

We know that 1 mole of NaOH reacts with 1 mole of HCl to form 1 mole of water.

Therefore, the amount of HCl that reacted with the NaOH is:

0.200 moles/L x 0.0800 L = 0.0160 moles

0.600 moles/L x 0.0200 L = 0.0120 moles

Since HCl and NaOH react in a 1:1 ratio, the limiting reagent is NaOH and 0.0160 moles of NaOH were used in the reaction.

The amount of NaOH that remains is:

0.0200 moles - 0.0160 moles = 0.0040 moles

The total volume of the solution is:

80.0 mL + 20.0 mL = 100.0 mL = 0.1000 L

Therefore, the concentration of the remaining OH- ions is:

0.0040 moles / 0.1000 L = 0.040 M

So the concentration of the remaining OH- ions is 0.040 M.

Learn more about concentration here:

https://brainly.com/question/13872928

#SPJ11

(a) pH = 11.13;

(b) pH = 9.25;

(c) pH = 8.81;

(d) pH = 9.45;

(e) pH = 9.00.

To calculate the pH of each solution, first determine the concentration of NH₃, then find the concentration of NH₄⁺ and OH⁻ ions using equilibrium expressions, and finally calculate the pH using the concentration of OH⁻ ions.


(a) When 40.0 mL of 0.100 M NH₃ is diluted to 20.0 mL, the concentration remains the same (0.100 M). Use Kb (NH₃) to calculate the concentration of OH⁻ ions and then determine pH.

(b)-(e) When mixing NH₃ with HCl or NH4Cl, first calculate the new concentrations of NH₃, H⁺ or NH₄⁺ ions. Then, use Kb (NH₃) and Ka (NH₄⁺) as needed to find the concentration of OH⁻ ions and calculate the pH.

To know more about pH click on below link:

https://brainly.com/question/2288405#

#SPJ11