The unknown alcohol = 2-propanol
Further explanationGiven
volume = 50 ml
mass = 39.4 g
Required
The unknown alcohol
Solution
Density of sample :
= mass : volume
= 39.4 g : 50 ml
= 0.788 g/ml
The unknown alcohol at room temperature = liquid, so the unknown alcohol is 2-propanol because it has temperature range between -90 to 82 for liquid and the density = 0.788 g/ml
4. The chemical energy in the person's body is transformed into when they peddle the bike, causing the generator to rotate. Some energy in the bike wheel is lost to . The generator produces electricity, which heats the water, causing it to produce thermal energy in the form of steam. When the person's chemical energy runs out, how do you replenish it? 5. Change the initial energy source to sun, the intermediate energy source to the solar panel, and the final energy source to the windmill. In this system, is produced from the sun and transformed into electricity in the solar panel. Both of these types of energy are considered forms of . The result of this system is that the windmill produces mechanical energy. 6. Try a few more scenarios, choosing different initial, intermediate, and final energy sources. Observe places where energy is transformed and lost. Creating systems with the least amount of energy is important in engineering design.
Answer:
Mechanical Energy, Thermal Energy, By Feeding Them Food, Light Energy, Electromagnetic Energy, it's right on Edge
Explanation:
Answer:
1. mechanical energy, 2. thermal energy, 3. by feeding them food, 4. light energy 5. electromagnetic energy
Explanation:
got it right on edg ;))
What is the overall trend for ionization energy on the periodic chart?
Answer:
The general trend is for ionization energy to increase moving from left to right across an element period. Moving left to right across a period, atomic radius decreases, so electrons are more attracted to the (closer) nucleus.
Explanation:
Brainliest plz
Answer:
Ionization energy increases across the period and decreases down the group.
7. Jasmine wants to prevent getting burned by accidently touching a hot metal pipe, What would be the worst
insulator for her to use to put around the pipe?
a, Glass
b. Rubber
c. Cloth
d. Wood
Answer:
A) Glass
Explanation:
Glass is a conductor, so it allows heat to go through it (Ex. Touching a pie pan that came right out of the oven)
Rubber is an insulator, so heat has a hard time passing through (Ex. Using a rubber grip on a cast iron pan.
Cloth is also an insulator, so heat has a hard time passing through (Ex. Using a pot holder to prevent the counter from getting scarred)
Wood is also an insulator, so heat has a hard time passing through (Ex. Bedding for a rabbit hutch)
Hope this helps!!
Charles's law describes the relationship of the volume and temperature of
gas at a constant mass and pressure. According to this law, what would
happen to the volume of the gas if its temperature increased from 150 K to
300 K?
A. The volume would increase from 150 mL to 300 mL.
B. The volume would be reduced by half.
C. The volume would decrease by 150 mL.
D. The volume would double.
Answer:
Charles's law is: When the pressure on a sample of a dry gas is held constant, the Kelvin temperature and the volume will be in direct proportion. So the volume would increase
Base changes phenolphthalein to pink it is true or false
Answer:
It’s false
Explanation:
it could be true if the question mentioned alkaline solution
Answer:
True
Explanation:
Phenolphthalein is colorless in the presence of an acid and turns pink in the presence of a base.
The proton number of barium (Ba) is 56. It is in Group II of the periidic table how many electrons would you expect a barium atom to contain in its outer energy level?
Answer:
A barium atom would be expected to contain 2 electrons in its outer energy level.
Explanation:
The columns of the periodic table are called groups. There are eighteen groups, numbered from 1 to 18.
The elements of each group have the same number of electrons in their last atomic shell, which is why they have similar chemical properties, because the chemical properties of chemical elements are strongly related to the electrons located in the last atomic shell.
That is, in a group, the chemical properties are very similar, because all the elements of the group have the same number of electrons in their last or last shells.
A barium atom would be expected to contain 2 electrons in its outer energy level.
whats the melting point of water
You need to make an aqueous solution of 0.150 M sodium fluoride for an experiment in lab, using a 500 mL volumetric flask. How much solid sodium fluoride should you add?
Answer:
Explanation:
Solution required is .15 M 500 mL sodium fluoride .
molecular weight of sodium fluoride = 42
one mole of sodium fluoride = 42 grams
No of moles contained in the solution of .15M , 500 mL solution
= .15 x 0.5 moles = .075 moles
1 mole = 42 g
.075 moles = .075 x 42 = 3.15 grams .
So mass of sodium fluoride required = 3.15 g .
Earths rocks change from one type to another over time die to various earth processes A- igneous rock B- cementation C- metamorphic rock D- rock cycle
Answer:
The rock cycle describes the processes through which the three main rock types (igneous metamorphic, and sedimentary) transform from one type into another.
How are rocks and water cycles similar? how are they different?
Answer: The water cycle is condensation, precipitation, evaporation, and transpiration. The rock cycle and water cycle overlap with erosion, transporting, and deposition.
There are various cycle in nature like water cycle, nitrogen cycle, rock cycle. In terms of cycling, water cycle and rock cycle are similar but in terms of steps these are different.
What is biological cycle?Biological cycle is a cycle in which recycling of element or compound take place in nature. It is circulation of a substance to its original form. It is rhythmic repetition of biological phenomena in associations of organisms. It involves multiple process.
There are various steps in water cycle like condensation, precipitation, evaporation, and transpiration while the process in rock cycle is erosion, transporting, and deposition.
Therefore in terms of cycling water cycle and rock cycle are similar but in terms of steps these are different
To know more about biological cycle, here:
https://brainly.com/question/797002
#SPJ2
Uhm how to do this? I need answers to this please
Answer:
Hi - First you need to determine whether there is a metal or no and from there there are certain rules in order to name the compound. Here is a flowchart to try and help.
Zn + 2MnO2 + 2H2O → Zn(OH)2 + 2MnO(OH) (balanced equation)
a. How many moles of Zn reacts when 0.200 moles of MnO(OH) is formed? (0.100)
b. How many moles of H2O reacts with 0.150 moles of Zn? (0.300)
c. how many moles of Zn(OH)2 are formed when 0.100 moles MnO2 reacts? (0.050)
d. How many moles of H2O react when 0.600 moles of MnO2 react? (0.600)
Answer:
Do you still need help?????????
what happend to that mass when the forest burns?
Answer:
When the forest burns we will lose a huge amount of oxygen and animals will lose their home.
Explanation:
PLSS HELP I GIVE BRAINLIEST
Answer:
you r correct it is layer a and b
Explanation:
Complex animals use their circulatory systems to provide their cells with water and
food. Plants do not have circulatory systems. What have they developed instead to
move nutrients and water?
Answer:
It is Xylem!
Explanation:
I just now took the test in Eduphoria. Just trust me, and you will get this right. I promise!
It is through circulatory system through which tissues get required oxygen, nutrients and also helps to remove waste products. The plants move water and nutrients through Xylem.
What is Xylem?The vascular tissue which carries water and minerals from the soil to the leaves and stems is defined as the xylem. It is composed of some specialized cells called tracheary components which carry water.
There are two types of xylem, they are primary xylem and secondary xylem. The primary xylem is developed during the primary growth of the plant whereas the secondary xylem is formed during the secondary growth of the plant.
The most important function of xylem is to transport water and minerals from the roots of the plant to other parts of the plant. This transportation occurs by passive transport which does not require any external energy.
The materials which flow through the xylem cell is called the xylem sap.
Thus xylem helps plants to move nutrients and water.
To know more about xylem, visit;
https://brainly.com/question/15918718
#SPJ6
Is water a reactant or product?
Answer: Reactant
Explanation:
In simple wording, Water act as a reactant and it broke or we can say split the larger molecule in the smaller ones, The H and OH bonds are attached to the two products that are formed after the reaction. Another process in which water is used as an important reactant is photosynthesis.
PLLLZZZZZZZZZZZZZZZ HELPPPPPP MEEEEEEEEEEEE THHHXXX
Balance the following chemical equations.
1. Al + HCl → AlCl3 + H2
2. Al+S → ALS:
3. NO2 + O2 + N2O5
4. A1,03 → A1+ O2
5. Ba(C103)2 → BaCl2 + O2
The basic principle of the number of elements in reactants and products is the same used in balancing chemical equations
Further explanationGiven
The chemical equation
Required
The balanced equation
Solution
Equalization of chemical reactions can be done using variables. Steps in equalizing the reaction equation:
• 1. gives a coefficient on substances involved in the equation of reaction such as a, b, or c, etc.
• 2. make an equation based on the similarity of the number of atoms where the number of atoms = coefficient × index (subscript) between reactant and product
• 3. Select the coefficient of the substance with the most complex chemical formula equal to 1
We give an example for reaction number 1:
aAl + bHCl → AlCl₃ + cH₂
Al, left = a, right = 1⇒a=1
Cl, left = b, right = 3⇒b=3
H, left = b, right = 2c⇒b=2c⇒3=2c⇒c=3/2
The equation becomes :
Al + 3HCl → AlCl₃ + 3/2H₂ x2
2Al + 6HCl → 2AlCl₃ + 3H₂
The steps are the same for the other reactions
2. 2Al + 3S → Al₂S₃
3. 4NO₂ + O₂ → 2N₂O₅
4. 4Al + 3O₂ → 2Al₂O₃
5. Ba(ClO₃)₂ → BaCl₂ + 3O₂
What is the empirical formula for the following molecular formula: C10H5O2
The empirical formula is the same as the molecular formula : C₁₀H₅O₂
Further explanationGiven
Molecular formula : C₁₀H₅O₂
Required
The empirical formula
Solution
The empirical formula (EF) is the smallest comparison of atoms of compound forming elements.
The molecular formula (MF) is a formula that shows the number of atomic elements that make up a compound.
(empirical formula) n = molecular formula
(EF)n=MF
(EF)n = C₁₀H₅O₂
If we divide by the number of moles of Oxygen (the smallest) which is 2 then the moles of Hydrogen will be a decimal number (not whole), which is 2.5, then the empirical formula is the same as the molecular formula
I think this is gonna be 2050 for memers
Answer:
HOLY WOAH
Explanation:
YES
Astronomers send probes to other planets to take pictures of their surfaces. An astronomer thinks that briny water flows on Mars because he noticed certain features in one picture of Mars. Which method did the astronomer
use to form this hypothesis?
1.reading scientific literature
2.making careful observations
3. analyzing a natural experiment
4. conducting a controlled experiment
Answer:
Its obviously 2 or 3 and since 2 isn't a method its 3
Explanation:
There you have it
To solve this we must be knowing each and every concept related to planet. Therefore, the correct option is option C among all the given options.
What is planet?A planet must accomplish three things: circle a star, be large sufficient to have sufficient gravity to compel a spherical form, and be large sufficient that its gravity swept away any similar-sized objects near its orbit.
Our solar system's planets did not arise out of nothing. The sun didn't either. They were all engulfed in a massive gas and dust cloud. Gravity gathered a lot of material inside the center to form the sun.
Astronomers send probes to other planets to take pictures of their surfaces. An astronomer thinks that briny water flows on Mars because he noticed certain features in one picture of Mars. Analyzing a natural experiment is a method to form this hypothesis.
Therefore, the correct option is option C.
To know more about planet, here:
https://brainly.com/question/29765555
#SPJ2
If you have 2 moles of sugar molecules,
you will have how many sugar molecules?
Answer- im pretty sure it's 2
Need a little help with this
Answer:
Lithium
Explanation:
As you go from left to right the atomic radius decreases.
As you go from top to bottom the atomic radius.
A. Carbon is farther right in the 2nd period.
B. Lithium is the first one in the 2nd period!
C. Neon is the farthest one on the right in the 2nd period.
D. Potassium is not even in the 2nd period
How many atoms are in 200.0 grams of Sulfur (S)?
Answer:
37.64 × 10²³ atoms
Explanation:
Given data:
Number of atoms = ?
Mass of sulfur = 200.0 g
Solution:
First of all we will calculate the number of moles of sulfur.
Number of moles = mass/molar mass
Number of moles = 200.0 g/ 32 g/mol
Number of moles = 6.25 mol
Number of atoms:
Avogadro number:
It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance.
The number 6.022 × 10²³ is called Avogadro number.
1 mole = 6.022 × 10²³ atoms
6.25 mol × 6.022 × 10²³ atoms / 1mol
37.64 × 10²³ atoms
7. When substances are combined to form a mixture, they
A. keep their original properties
B. form new chemical bonds
C. form a new compound
D. cannot be separated physically
Answer: keep their original properties
Explanation: a mixture is, by definition, a combination of substances that do not interact, so they do not form new bonds/new compounds. They can usually be separated physically.
Mixtures are combinations of two or more individual components. However they can be separated physically based on their properties. They can form new bonds and compounds. Hence, options B and C are correct.
What are mixtures?Mixtures are formed by the combination of two or more substances by physical adherence or chemical bonds. They can be of homogeneous or heterogeneous.
Homogeneous mixtures appears as a single compound such as salt or sugar water they can form in one phase. Whereas, heterogeneous mixtures form two phases and appears to be separate.
There are many analytical tools to separate the components of mixtures such as chromatography, distillation, evaporation etc. The properties of mixtures will be different from that of the individual components. Hence, options B and C are correct.
To find more on mixtures, refer here:
https://brainly.com/question/24898889
#SPJ5
Can two compounds be used as reactants for a synthesis reaction?
not sure how to do this
the topic is limited reactants
i could do the first 2 but i’m stuck on this one because i don’t know the formula
Answer:
24 g of oxygen
Explanation:
The equations means that four moles of CH3NO2 reacts with three moles of oxygen to yield for moles of carbon dioxide, two moles of nitrogen gas and six moles of water.
The balanced equation of the reaction is;
4CH3NO2 + 3O2 -----> 4CO2 + 2N2 + 6H2O
Molar mass of CH3NO2 = 61 g/mol
61 g of methyl nitrate contains 61 g/ 61 g/mol = 1 mole of CH3NO2
From the balanced reaction equation;
4 moles of CH3NO2 reacts with 3 moles of oxygen
1 mole of moles of CH3NO2 reacts with 1 * 3/4 = 0.75 moles of oxygen gas
0.75 moles of oxygen gas * 32 g/mol = 24 g of oxygen
At which temperature is the vapor pressure of ethanol equal to the vapor pressure of propanone at 35°C?
Answer: 60 C
Explanation:
any help welcome on this, chem balancing equations btw !
Answer:
A. 1, 1, 1, 1
B.1,1,1
C. 2, 1, 2, 1
D. 2, 1, 1, 1
E.1,2,1,1
F.1, 1, 1, 2
G. 1, 6, 3, 4
H. 2, 3, 2, 3
what is neucler fission
Answer:
Neucler fission is a radioactive decay process. The nucleus of an atom splits into two.