I will mark brainliest
What kind of weather forms with an occluded front?
Answer:Occluded fronts usually form around areas of low atmospheric pressure. There is often precipitation along an occluded front from cumulonimbus or nimbostratus clouds. Wind changes direction as the front passes and the temperature either warms or cools.
Explanation:
the desity of gold is 19.3 g/cm3. what is the volume of a 13 g gold nugget .
Answer:
0.67 cm³
Explanation:
We can solve this problem by using the definition of density:
Density = Mass / VolumeWe can rearrange the equation and isolate volume:
Volume = Mass / DensityAs we are given both the mass and the density, we can now calculate the volume:
Volume = 13 g ÷ 19.3 g/cm³Volume = 0.67 cm³Which is a reason to use rate laws?
A. to investigate how the pressure of liquids affects reaction rates
B. to find the new rate when the concentration of reactants changes
C. to calculate the molecular weight of compounds in a reaction
D. to find the number of moles of solute that are dissolved in 1 L of solution
Answer:
B
Explanation:
to find the new rate when the concentration of reactants changes
Use the periodic table below to answer the following questions.
What group of elements are contained in the p-block?
a.
1A
c.
3A
b.
2A
d.
3B
Answer:
answer is D
Explanation:
3B
Try moving an electron from the metal to the non metal.What happens?
Answer:
Sodium becomes a positive ion and chlorine becomes a negative ion. ... Each atom is neutrally charged, which means that each atom has the same number of protons and electrons.
Explanation:
In alpha decay, the parent nucleus loses an alpha particle, which is two protons and two neutrons.
a. True
b. False
Answer:
True
Explanation:
In an alpha decay, the isotope of an element releases two protons and two neutrons. An alpha particle or helium has two protons and two neutrons and hence, in an alpha decay an alpha particle is released.
Hence, the given statement is true
According to the reaction, below, how many grams of aluminum are needed to react fully with 100 grams of sulfur? 2AL + 3s - Al2S3
Answer: 56.2 g of Aluminium is needed to react fully with 100 grams of sulphur.
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} S=\frac{100g}{32g/mol}=3.125moles[/tex]
The balanced chemical equation is:
[tex]2Al+3S\rightarrow Al_2S_3[/tex]
According to stoichiometry :
3 moles of [tex]S[/tex] require = 2 moles of [tex]Al[/tex]
Thus 3.125 moles of [tex]S[/tex] will require=[tex]\frac{2}{3}\times 3.125=2.08moles[/tex] of [tex]Al[/tex]
Mass of [tex]Al=moles\times {\text {Molar mass}}=2.08moles\times 27g/mol=56.2g[/tex]
Thus 56.2 g of Aluminium is needed to react fully with 100 grams of sulphur.
Which ecosystem is the least stable?
A. A rain forest
B. A cornfield
C. A savanna
D. A coral reef
What is the vapor pressure of an aqueous solution that has a solute mole fraction of 0.1000? The vapor pressure of water is 25.756 mmHg at 25 °C.
Answer:
χsolvent = 1.0000 - 0.1000 = 0.9000
Use Raoult's Law:
Psolution = (χsolvent) (P°solvent)
x = (0.900) (25.756)
x = 23.18 mmHg (to four sig figs)
The vapor pressure of an aqueous solution is x = 23.18 mmHg (to four sig figs)
χsolvent = 1.0000 - 0.1000 = 0.9000
Use Raoult's Law:
P solution = (χsolvent) (P°solvent)
x = (0.900) (25.756)
x = 23.18 mmHg (to four sig figs)
What is an aqueous solution?An aqueous answer is one in which the solvent is liquid water. that is, solute (dissolved) ions and molecules are surrounded by water molecules and integrated into the network of bonds within the water. The dissolved species then spread in the course of the water.
A solution wherein water is the solvent is called an aqueous solution. although water is an exceptional solvent, now not the whole thing dissolves comfortably in the water.
Aqueous' in a chemical equation suggests that the cloth dispersed in water (an answer in water). As an example, when we pour sodium hydroxide answer into dilute hydrochloric acid, we get an aqueous solution of sodium chloride. The liquid is used to signify the formation of liquid materials in response.
Learn more about the aqueous solution here: https://brainly.com/question/19587902
#SPJ2
When i make an account for different college can I use the same email username for each one or do I have make a different username email
Answer:
No you have to use a new email unless you delete the other accaount
Explanation:
hope that helps
PLEASE HURRY IM TIMED I WILL GIVE BRAINYEST
What is another name for the sunlit zone of the ocean?
A twilight zone
B abyssal zone
C photic zone
D benthic zone
Answer:
The answer is the C. Photic zone.
Explanation:
I wish you good luck! :>
Answer: C photic zone
Explanation:
How many grams are present in 3.4
moles of CH2COOH?
Show all work
Answer:
m = 200.6 gr
Explanation:
CH2COOH : n = 3.4 mol
Mr = 12 + 2 + 12 + 2×16 + 1 = 59
n= m / Mr => m = n× Mr => m = 3.4×59 => m = 200.6 gr
what is the electrolysis of water
Coal, oil, and natural gas are called _______.
A.
fossil fuels
B.
renewable resources
C.
nuclear power
D.
solar energy
Answer:
I think it's A. I'm pretty sure.
Explanation:
Answer:
Coal, oil and natural gas are called _________A. fossil fuels
How is dry ice different from ordinary ice?
Answer: Well "ordinary ice" is made from water (as we all know) and dried ice is made from carbon dioxide gas
Explanation:
•Hope this helps•
Does pb(no3)2 + Na3(PO4) = Pb3(PO4)2 + Na(NO3) have a precipitate?
Answer:
Yes, Pb3(PO4)2.
Explanation:
Hello there!
In this case, according to the given balanced chemical reaction, it is possible to use the attached solubility series, it is possible to see that NaNO3 is soluble for the Na^+ and NO3^- ions intercept but insoluble for the Pb^3+ and PO4^2- when intercepting these two. In such a way, we infer that such reaction forms a precipitate of Pb3(PO4)2, lead (II) phosphate.
Regards!
What is the molecular geometry, or shape, of the molecule shown in the image?
A. bent
B. tetrahedral
C. trigonal planar
D. linear
Answer:
The correct answer to this is C. Trigonal Planner
Explanation:
I got it right..
Which of the following is NOT a benefit of strength training? WILL GIVE BRAINLIEST! :)
A. Better control of muscle
B. More efficient movement
C. Decreased force variance
D. Increased flexibility
I think it's D
Explanation:
if you think abt it strength training means weights and stuff so I dont think it increases flexibility. it's that or letter C
What type of reaction is this? FeSO4 + Al(OH)3 → Al2(SO4)3 + Fe(OH)2
What is the molarity of a 9.79 L solution that contains 0.400 mol HCI
Answer:
0.041 MExplanation:
The molarity of a solution when given the number of moles the substance and it's volume can be found by using the formula
[tex]c = \frac{n}{v} \\ [/tex]
n is the number of moles
v is the volume in L
We have
[tex]c = \frac{0.4}{9.79} \\ = 0.04058...[/tex]
We have the final answer as
0.041 MHope this helps you
18. A 35.0 G piece of metal wire is heated and the temperature changes from 21°C to 52°C the specific heat of the metal is 0.900 J/G degrees Celsius how much energy was required to heat the metal please show work
Answer:
[tex]\boxed {\boxed {\sf 976.5 \ Joules}}[/tex]
Explanation:
We are asked to find the heat energy. Since we are given the mass, specific heat, and change in temperature, we should use this formula for heat:
[tex]q=mc\Delta T[/tex]
Where m is the mass, c is the specific heat, and ΔT is the change in temperature.
We know this is a 35.0 gram piece of wire, the temperature changes from 21 °C to 52°C and the specific heat is 0.900 J/ g °C.
Therefore,
m= 35.0 gc= 0.900 J/g °CΔT= 52 °C - 21°C= 31°CSubstitute these values into the formula.
[tex]q= (35.0 \ g)(0.900 \ J/g \ \textdegree C)(31 \textdegree C)[/tex]
Multiply the first two values. The grams will cancel each other out.
[tex]q=31.5 \ J/ \textdegree C (31 \textdegree C)[/tex]
Multiply again. This time, the degrees Celsius cancel each other out, so the final units are Joules.
[tex]q=976.5 \ J[/tex]
976.5 Joules of energy were required to heat the piece of metal.
Which of the following is a metal?
a.
silicon, Si, Z = 14
b.
phosphorus, P, Z = 15
c.
thallium, Tl, Z = 81
d.
arsenic, Z = 33
e.
nitrogen, N, Z = 7
Answer:
A.................. I think the answer
Why are diamonds unevenly distributed on Earth?
Soil forms only in places where rock particles are deposited.
Soil forms only in places where larger rocks are broken into smaller rocks.
Soil forms only within the Earth under heavy pressure.
Soil forms in the air and is then deposited mainly in places that get a lot of rain.
Answer:
Why aren't diamonds found evenly distributed on Earth? Diamonds are only formed under specific conditions that involve geological processes, such as volcanic activities and plate movements. Since these conditions and processes only take place in certain areas, you can only find diamonds in these special places.
Explanation:
How many moles of argon gas would be present in a 37.0 liter vessel at 45.00 °C at a pressure of 2.50 atm?
Answer:
3.54 mol
Explanation:
Step 1: Given data
Volume (V): 37.0 LTemperature (T): 45.00 °CPressure (P): 2.50 atmStep 2: Convert "T" to Kelvin
We will use the following expression.
K = °C + 273.15
K = 45.00°C + 273.15 = 318.15 K
Step 3: Calculate the number of moles (n) of argon gas
We will use the ideal gas equation.
P × V = n × R × T
n = P × V/R × T
n = 2.50 atm × 37.0 L/(0.0821 atm.L/mol.K) × 318.15 K = 3.54 mol
Chrysanthemic acid occurs as a mixture of esters in flowers of the chrysanthemum (pyrethrum) family.
a. True
b. False
Answer:
A: True
Explanation:
Statement is true because chrysanthemic acid is formed naturally as a result of production of two molecules of dimethylallyl diphosphate which forms pyrophosphate ester.
Thus, it belongs to the pyrethrum family
Last time I'm asking this, answer, this time, 50 points.
Think about a single cell and its parts; for example, think about a cell inside the human body. Now, select an everyday object that could be used as a model for a cell and its parts. In words and/or pictures, describe your model and how it is like the cell.
Explanation:
Well i mean clothes so cells make tissues which help organs clothes can technically help you if you fall it has layers so it woulf be as a cell?
1 Write the chemical symbols for following elements: Nitrogen-
Phosphorus- bromine- Zinc-Potassium-Magnesium.
Answer:
I think
Explanation:
N for nitrogen
P for phosphorus
Br for bromine
K for potassium
Mg for magnesium
In the laboratory, a general chemistry student measured the pH of a 0.341 M aqueous solution of benzoic acid, C6H5COOH to be 2.351. Use the information she obtained to determine the Ka for this acid.
Answer: [tex]K_a[/tex] for the acid is [tex]5.75\times 10^{-5} [/tex]
Explanation:
[tex]C_6H_5COOH\rightarrow H^+C_6H_5COO^-[/tex]
cM 0 0
[tex]c-c\alpha[/tex] [tex]c\alpha[/tex]
So dissociation constant will be:
[tex]K_a=\frac{(c\alpha)^{2}}{c-c\alpha}[/tex]
Give c= 0.341 M and = 2.351
[tex]K_a=?[/tex]
[tex]pH=-log[H^+][/tex]
[tex][H^+]=10^{-2.351}=0.0044[/tex]
[tex][H^]=c\alpha=0.0044[/tex]
[tex]K_a=\frac{(0.0044)^{2}}{0.341-0.0044}[/tex]
[tex]K_a=5.75\times 10^{-5} [/tex]
Thus [tex]K_a[/tex] for the acid is [tex]5.75\times 10^{-5} [/tex]
36. Write a balanced chemical equation for each chemical reaction. (a) Solid copper reacts with solid sulfur to form solid copper(I) sulfide. (b) Sulfur dioxide gas reacts with oxygen gas to form sulfur trioxide gas. (c) Aqueous hydrochloric acid reacts with solid manganese(IV) oxide to form aqueous manganese(II) chloride, liquid water, and chlorine gas. (d) Liquid benzene (C6H6) reacts with gaseous oxygen to form carbon dioxide and liquid water.
Answer:
a) 2Cu(s) + S(s) → Cu₂S(s)
b) 2SO₂(g) + O₂(g) → 2SO₃(g)
c) 4HCl(aq) + MnO₂(s) → MnCl₂(aq) + 2H₂O(l) + Cl₂(g)
d) C₆H₆(l) + 15/2 O₂(g) → 6CO₂(g) + 3H₂O(l)
Explanation:
First, we have to write the chemical formulas for reactants and products. Then, to identify which is the state of matter of each compound (liquid: l, solid: s, aqueous: aq, gas: g). Finally, we write the equation and balance the atoms.
a) Solid copper reacts with solid sulfur to form solid copper(I) sulfide.
Reactants: solid copper (Cu(s)) and solid sulfur (S(s)). Product: copper(I) sulfide (Cu₂S) because sulfur anion has two negative charges (S⁻²) and we need two copper ions with one positive charge (Cu⁺) to obtain the neutral compound.
The balanced requires a coefficient of 2 for Cu(s) to balance the 2 Cu atoms on the products side:
2Cu(s) + S(s) → Cu₂S(s)
(b) Sulfur dioxide gas reacts with oxygen gas to form sulfur trioxide gas.
Reactants: sulfur dioxide (SO₂) and oxygen gas (which is a diatomic molecule: O₂). Products: sulfur trioxide gas (SO₃(s)).
The balanced equation is:
2SO₂(g) + O₂(g) → 2SO₃(g)
We need a coefficient of 2 for SO₂ and SO₃ to balance O and S atoms.
(c) Aqueous hydrochloric acid reacts with solid manganese(IV) oxide to form aqueous manganese(II) chloride, liquid water, and chlorine gas.
Reactants: aqueous hydrochloric acid (HCl(aq)) and solid manganese (IV) oxide (MnO₂(s), because we need two oxygen anions O²⁻ to neutralize 4 positive charges in Mn IV). Products: aqueous manganese(II) chloride (MnCl₂, because we need two chloride ions Cl⁻ to neutralize two positive charges in Mn(II)), liquid water (H₂O), and chlorine gas (Cl₂, because it is a diatomic molecule).
The balanced chemical equation is:
4HCl(aq) + MnO₂(s) → MnCl₂(aq) + 2H₂O(l) + Cl₂(g)
(d) Liquid benzene (C₆H₆) reacts with gaseous oxygen to form carbon dioxide and liquid water.
Reactants: benzene (C₆H₆) and gaseous oxygen (O₂). Products: carbon dioxide (CO₂, because C has valence IV) and liquid water (H₂O).
The balanced chemical equation is:
C₆H₆(l) + 15/2 O₂(g) → 6CO₂(g) + 3H₂O(l)
In this case, we need a coefficient of 15/2 for O₂ because on the product side there are 15 atoms of O (12 in CO₂ and 3 in H₂O).
solution with low concentration of hydrogen ions have a __________ ph .
Answer:
6.37
Explanation:
Answer:
high ph
Explanation:
if you have high conc of H+ ph is low therefore acidic but if vice versa basic
high ph