the metal, with an atomic radius of 144 pm, crystallizes in a face-centered cubic lattice. what is the density of the metal? 30.0 g/cm3 7.17 g/cm3 10.6 g/cm3 2.40. g/cm3 1.06 g/cm3

Answers

Answer 1

The density of the given metal is 19.4g/cm³ which is calculated using the density formula.

For the FCC crystal, atoms are in contact along the diagonal of the unit cell.

4r= √2a

where a is  edge length of unit cell and r is  radius of atom.

Substituting values in the above given expression, we get

r= 144pm

Number of the atoms per unit cell (FCC) =4

Mass of 1 unit cell = 197×4=788amu

=1.66×10⁻²⁷  ×788kg=1.30808×10⁻²⁴  kg

Volume of 1 unit cell =(407×10⁻¹² )³ m³

=6.741×10⁻²⁹

 =2.824×10⁻²⁸

Hence the density=  1.30808×10⁻²⁴/ 6.741×10⁻²⁹

=19404.83kg/m³

=19.4g/cm³

The density of the crystal will be 19.4g/cm³

To know more about the FCC lattice , please refer to below link:

https://brainly.com/question/20849341

#SPJ4


Related Questions

What are the important things about atomic structure? Everything you need to know

Answers

An atom is a complicated configuration of negatively charged electrons grouped around a positively charged nucleus in certain shells. The majority of the atom's mass is concentrated in this nucleus.

What are the most significant atomic structure discoveries?

In Thomson's "plum pudding" atom model, a positively charged "soup" was surrounded by negatively charged electrons. The majority of an atom is empty space, with a small, dense, positively-charged nucleus, as demonstrated by Rutherford's gold foil experiment. Rutherford postulated the nuclear model of the atom in light of these findings.

What fundamentals of atomic structure are there?

Protons, neutrons, and electrons are the three fundamental building pieces that make up an atom in any element. In the grand scheme of things at the subatomic level, protons are positively charged particles while neutrons are uncharged particles.

to know more about atomic structures here:

brainly.com/question/14156701

#SPJ1

Which statement is a TRUE description of inorganic compounds? Inorganic compounds lack long, complex chains of carbon atoms. Polysaccharides are inorganic compounds because these sugars do not taste sweet. Inorganic compounds can be formed from complex sequences of amino acids. Inorganic compounds can produce energy in the form of ATP.

Answers

True statement of inorganic compounds are  Inorganic compounds lack long, complex chains of carbon atoms.

A material without both carbon and hydrogen is said to be an inorganic compound. Many inorganic substances, like water (H2O) and the hydrochloric acid (HCl) secreted by your stomach, do contain hydrogen atoms. In contrast, carbon atoms are only present in a small number of inorganic molecules. A chemical without a carbon-hydrogen bond is said to be inorganic. A chemical substance that does not contain carbon-hydrogen bonds, or one that is not an organic complex, is known as an inorganic compound. Any substance in which two or more chemical elements (often those other than carbon) are mixed, almost invariably in precise proportions, is referred to as an inorganic compound. When carbon is bonded to hydrogen, a compound is categorized as organic.

To learn more about inorganic compounds Please click on the given link:

https://brainly.com/question/17579423

#SPJ4

Compare and contrast biological and non biological
methods of metal extraction

Answers

Biological and non-biological methods of metal extraction refer to the different ways in which metals can be extracted from ore deposits in the ground. Biological methods, also known as biomining, use microorganisms to extract metals from ores. These microorganisms, such as bacteria and fungi, can break down the chemical bonds in ores and release the metals they contain, which can then be extracted and purified. Non-biological methods, on the other hand, use physical or chemical processes to extract metals from ores. These methods can include roasting, smelting, and leaching, and they do not require the use of living organisms.

One key difference between biological and non-biological methods of metal extraction is the speed at which they can extract metals. Biological methods are generally slower than non-biological methods, but they are also often more environmentally friendly, as they do not produce as much waste or pollution. Non-biological methods, on the other hand, can be faster and more efficient, but they can also be more harmful to the environment.

Another difference between the two types of metal extraction methods is the types of ores that they can be used on. Biological methods are typically more effective on sulfide ores, which are ores that contain sulfur. Non-biological methods, on the other hand, are often more effective on oxide ores, which are ores that contain oxygen.

Overall, biological and non-biological methods of metal extraction are two different approaches to extracting metals from ores. While both methods have their advantages and disadvantages, they are both important tools in the field of mining and metallurgy.

draw n-methylpiperidine and n,n-dimethylaniline, and classify each as a 1°, 2°, or 3° amine.

Answers

N-methylpiperidine and n,n-dimethylaniline (structures attached), and both are 3° amine.

According to the number of carbon atoms that are directly bonded to the nitrogen atom, amines can be divided into three categories: primary, secondary, and tertiary. A single carbon atom is linked to the nitrogen atom in primary amines. The nitrogen is bound to two carbons in secondary amines, while it is bonded to three carbons in tertiary amines. Secondary amines are found in organic compounds.

The molecule n,n,-dimethylaniline contains a benzene ring, followed by nitrogen that is linked to two CH3 groups. As a result, we can see that the element nitrogen is bonded to three different carbon atoms in each molecule. As a result, it is an amine of the third degree or it is a tertiary amine.

You can also learn about tertiary amines from the following question:

https://brainly.com/question/28167507

#SPJ4

the surfaces of a dewar flask are silvered for the purpose of minimizing heat transfer by what process?

Answers

Radiative heat transfer through the glass is reduced by the silvering. The vacuum flask was created in 1892 by James Dewar.

By what method are the surfaces of a thermos container silvered to reduce heat transfer?

Because of the vacuum between its double walls and the inner bottle's silver coating, heat cannot move through the inner bottle by convection. Conduction cannot transfer heat into or out of the flask due to the thickness of the glass walls.

How may heat transfer be reduced with a thermos flask?

Using using a vacuum area between the outer and inner vessels and a few heat-insulating supporters to support the inner container, it is possible to completely stop heat loss by this method.

To know more about Radiative heat visit :-

https://brainly.com/question/13258114

#SPJ4

in the laboratory, a student dilutes 24.8 ml of a 11.0 m hydrochloric acid solution to a total volume of 200.0 ml. what is the concentration of the diluted solution?

Answers

There are various approaches to answering this question. The most typical method is to use the formula M1V1=M2V2 . the concentration of the diluted solution is 1.364 M

Make sure M is Molarity and V is Volume in Liters when entering this formula. To solve this issue, you must divide 24.8 mL  1,000 to obtain.0248 L. M1 denotes the given molarity (11.0M), and V1 denotes the given molarity's volume (.0248 L). V2 is the final volume of M2, the final molarity that we are looking for. This makes sense given that we increased the volume of the solution while maintaining the same number of moles in the concentration . Our solution should be less concentrated (have a smaller molarity) is 1.364 M

(11.0M) * (.0248 L) = (X) * (.2000 L)

(11.0M) * (.0248 L) / (.2000 L) = (X)

1.364 M = X

learn more about concentration here:

https://brainly.com/question/23437000

#SPJ4

the inflammatory response involves chemical and physical barriers that help protect the body from harmful substances.

Answers

The statement stating the inflammatory response involves chemical and physical barriers that help protect the body from harmful substances is true.

Our body has immune system to protect from unwanted substances and organisms that may harm our body. It involves different types of cells that are broadly categorised into myeloid and lymphoid immune cells. They utilise chemicals to impart protection to body.

Physical barrier is tears, skin, mucus that prevents the entry of harmful organisms into the body. The common symptoms we see on encountering the foreign substances are allergy, cough, fever, pain and other such signs.

Learn more about inflammatory response -

https://brainly.com/question/15741262

#SPJ4

Answer: true

Explanation: edg

A certain weak acid, HA , with a Ka value of 5.61×10−6 , is titrated with NaOH .Part A: A solution is made by titrating 8.00 mmol (millimoles) of HA and 2.00 mmol of the strong base. What is the resulting pH?Part B: More strong base is added until the equivalence point is reached. What is the pH of this solution at the equivalence point if the total volume is 71.0 mL ?Express the pH numerically to two decimal places.

Answers

Part A : pH = 4.77 when a  solution is made by titrating 8.00 mmol (millimoles) of HA and 2.00 mmol of the strong base. Part B : pH = 9.15 if More strong base is added until the equivalence point is reached in solution of total volume 71.0mL.

Part A :

Ka value of 5.61 x 10 -6

pKa = -log Ka = 5.25

And the reaction:

HA + OH- = A- + H0

excess millimoles HA = 8.00 - 2.00 = 6.00

mmol A- formation = 2.00

pH = 5.25 + log 2.00/6.00

=5.25 + log 0.333

=4.77

Part B:

A- millimoles formed at the equivalence point = 8.00 => 8.00 x 10^-3 mol

[A-]= 8.00 x 10^-3 mol/ 0.0710 L=0.113 M

A- + H0 <=> HA + OH-

Kb = Kw/Ka = ​​1.0 x 10^-14 / 5.61 x 10^-6 = x^2/ 0.113-x

1.78*10^-9 = x^2/0.113-x

Due to the small value of Kb, we can write 0.113-x = 0.113.

1.78*10^-9 = x^2/0.113

X = 1.42*10^-5

x = [OH-] = 1.42 x 10^-5M

pOH = -log[OH-] = 4.85

and pH + pOH = 14

Therefore pH = 14-4.85

pH = 9.15

Equivalence point is the titration point where the amount of titrant added is just sufficient to completely neutralize the sample solution. At the equivalence point in an acid-base titration, moles of base = moles of acid, and the solution contains only salt and water. Diagram of equivalence points.

For more information on Equivalence point , visit :

https://brainly.com/question/15187703

#SPJ4

Arrange the organic compounds from most soluble in water to least soluble in water: Most soluble in water Least = soluble in water...

Answers

Alcohol is more soluble in water than ether. And CH4 is non polar. So, CH4 will be almost insoluble water.

CH3OH - most soluble

CH3-O-CH3 - second

CH4 - least soluble.

Solubility is defined as the maximum amount of a substance that will dissolve in a specified amount of solvent at a specified temperature. Solubility is a characteristic property of a particular solute/solvent combination, and different substances have very different solubilities.

Solubility can be expressed in grams of solute in one liter of saturated solution. For example, the solubility in water at 25 oC is 12 g/L. Molar solubility is the number of moles of solute per liter of saturated solution. For example, 0.115 mol/L at 25 oC

Learn more about solubility here : https://brainly.com/question/23946616

#SPJ4

What can we say about the temperature change of a sample of water when the value of q is negative?
The temperature of the water increased.
The temperature of the water decreased.
It depends on whether mass and specific heat values are positive or negative.

Answers

The temperature of the water increased when the value of q(specific heat capacity) is negative.

Explanation of Specific Heat Capacity

The hydrogen bonding in water is the cause of its high specific heat capacity, which we can explain. The water molecules must shake in order for the numerous connected hydrogen bonds to raise the temperature of the liquid. Because there are so many hydrogen bonds, it takes more energy for the water molecules to break. Similarly to this, it takes some time for warm water to cool down. The temperature drops as heat escapes and the vibrational motion of water molecules slows. The warmth released balances the chilling impact of the heat loss from the liquid water.

Specific Heat of Water

The specific heat capacity (Cp) of a liquid at atmospheric pressure and temperature is roughly 4.2 J/g°C. This suggests that to increase 1 gramme of water by 1 degree Celcius, 4.2 joules of energy are required. Actually, this Cp number is rather high. The specific heat of liquid water, also known as the specific heat capacity of liquid water, is 1.9 J/g°C..

To learn more about Specific heat capacity here:

https://brainly.com/question/26846829#

#SPJ4

how many moles of chlorine are required to react completely with 0.66 moles of sodium using this reaction: na cl2 ---> nacl 23.1 moles 1.32 moles 0.33 moles 0.99 moles

Answers

b. There must be 1.32 moles of chlorine to balance the reaction.

This answer can be determined by using the stoichiometric equation, which states that for a balanced equation, the number of moles of each element in the reactants must equal the number of moles of each element in the products.

In this case, the equation is Na + Cl2 --> NaCl, and the given information is that there are 0.66 moles of sodium. In order to determine how many moles of chlorine are required to react completely with the sodium, we must first determine how many moles of sodium chloride will be produced.

Since there is one mole of sodium for every mole of chlorine, we can calculate that 0.66 moles of sodium chloride will be produced. This means that there must be 1.32 moles of chlorine to balance the reaction and produce the desired amount of sodium chloride.

For more questions like Chlorin reaction click the link below:

https://brainly.com/question/15524283

#SPJ4

A particle ‘A’ of mass of 2.0 kg has charge 1.2 μC deposited on it. Determine the ratio of electric and gravitational force between ‘A’ and ‘B’ if mass of ‘B’ is 1.5 kg and charge on it is 0.92 μC. distance between particle ‘A’ and ‘B’ is 4.8 m.

Answers

Answer: The correct answer is 4.956 * 10^7.

Explanation:

For Electrostatic force,

Given qA =1.2 × 10∧-6 C (Since 1 micron = 10∧-6)

qB=0.92 ×10∧-6 C Since 1 micron = 10∧-6)

r = 4.8m

Electrostatic force = (K×qA×qB)÷r∧2 where K is Coulomb's constant or electrostatic constant =8.98755×10∧9

Therefore Electrostatic energy =(8.98755×10∧9×1.2×0.92×10∧-12)÷4.8∧2

                                                   =0.00043065 N ················ eq1

Now for Gravitational force,

mA=2Kg ,mB=1.5Kg ,r=4.8m,G is Gravitational constant =6.67408 × 10-11 N m2 kg-2

Gravitational force=(G×mA×mB)÷r∧-2

                               =(6.67408 × 10-11 ×2×1.5)÷4.8∧-2

                                 =0.869021875 ×10∧-11 N...............eq2

Ratio of electric and gravitational force between ‘A’ and ‘B’ = eq1÷eq2

                                                                                 =49555714.5785

                                       

Electrostatic force occurs due to interaction either between like charges that is either between positive-positive or negative negative charges or between unlike charges like positive-negative. Its strength  depends on the charges and the distance between the charges which decreases as the distance increases.

Gravitational  force occurs due to the fact every particle attracts each and every other particle in the universe. Its strength  depends on the mass  and the distance between the particles which decreases as the distance increases.

For further reference on gravitational and Electrostatic refer:

https://brainly.com/question/24783651

C2H2 + O2 CO2 + H2O what is being reduced and what is being oxidized?

Answers

In the chemical reaction C2H2 + O2 CO2 + H2O, the compound C2H2 is being oxidized, while the compound O2 is being reduced. This is because, in an oxidation-reduction reaction, the substance that is being oxidized (in this case, C2H2) is losing electrons, while the substance that is being reduced (in this case, O2) is gaining electrons.

hydrochlorofluorocarbons (hcfcs) have a complex effect on global warming. explain the effect that hcfcs have on radiative forcing.

Answers

CFCs, HCFCs and HFCs take in infra-pink radiation and therefore are greenhouse gases which can exert a further radiative forcing that has a tendency to heat the climate.

HFCs are mighty greenhouse gases that may be masses to hundreds of instances stronger than carbon dioxide (CO2) in contributing to weather alternate in line with unit of mass. They do not virtually purpose any harm locally. So in contrast to particulate count or nitrogen oxides, they do not damage human beings uncovered to them and respiratory them in. What they do damage, however, is the ozone layer. HFCs are a greenhouse gas, and so emitting them contributes to global warming.

To learn more about global warming check the link below:

https://brainly.com/question/26402403

#SPJ4

it is said that secrets should be few and changeable and they should also maximize entropy. what is entropy?

Answers

Entropy, the amount of thermal energy per unit temperature in a system that cannot be used for productive work.

Entropy is the measurement of the amount of thermal energy per unit of temperature in a system that cannot be used for productive work. Entropy is a measure of a system's molecular disorder or randomness because work is produced by ordered molecular motion. Entropy theory offers profound understanding of the direction of spontaneous change for many commonplace phenomena. A standout of 19th-century physics is its invention by the German physicist Rudolf Clausius in 1850. Entropy offers a mathematical way to express the intuitive understanding of which processes are impractical even though they wouldn't go against the fundamental principle of energy conservation.

To know more about Entropy visit : https://brainly.com/question/13999732

#SPJ4

In this reaction, how does the rate of forward reaction vary with the concentration of the product?
2H2S(g) ⇌ 2H2(g) + S2(g)

Answers

The rate of the forward reaction increase with a decrease in the concentration of the product.

What is Le chatelier's principle?

According to Le chatelier's principle, by increasing the rate of chemical reaction then the equilibrium of the reaction will shift towards the low concentration side. On decreasing the rate of reaction then the equilibrium of the reaction shifts towards the high-concentration side.

The effect on the rate of forward chemical reaction to the concentration of the product.

The rate of forward reaction will increase when the concentration of the product decreases. The rate of forward reaction will decrease when the concentration of the product will be increased.

The rate of the forward reaction is also affected by the concentration of the reactant. The rate of forward reaction will increase when the concentration of reactant will increase. The rate of forward reaction will decrease when the concentration of the reactant will decrease.

Learn more about Le chatelier's principle, here:

https://brainly.com/question/29195371

#SPJ1

12.7 l of argon at 33°c and 735 torr are dissolved in enough water to give a final volume of 0.750 l. what is the molarity of the resulting solution
a. 6.02 M
b. 0.652 M
c. 0.0644 M
d. 0.489 M
e. 4.95 M

Answers

Option (b) is correct. The molarity of the resulting solution is 0.652 M. This is calculated using the expression of ideal gas equation and molarity.

12.7 l of argon at 33°c and 735 torr are dissolved in enough water to give a final volume of 0.750l. so,

P = 735.0 torr

 = (735.0/760) atm.

 = 0.9671 atm.

V = 12.7 L

T = 33.0 o C

 = (33.0+273) K

 = 306 K

We can find the  number of moles using ideal gas equation. The ideal gas law, also called the general gas equation, is the equation of state of a hypothetical ideal gas. It is a good approximation of the behavior of many gases under many conditions. The ideal gas equation is,

         P * V = n*R*T

        0.9671 atm. * 12.7 L = n * 0.08206 atm. L/mole . K * 306 K

        n = 0.4891 mole

Now, we will calculate Molarity. Molarity or molar concentration is the number of moles of solute per liter of solution, which can be calculated using the following equation,

Molarity = number of mole / final volume

 = 0.4891 mole / 0.750 L

 = 0.652 M

To learn more about Ideal gas equation please visit:

https://brainly.com/question/13248885

#SPJ4

indicate whether the following reaction involves c–o or o–h bond cleavage of the alcohol molecule.

Answers

The following reaction involves (1) C–O  bond cleavage of the alcohol molecule.

When extreme circumstances and an abundance of hydrogen halides are present, the C-O bond in ethers can be broken. Two molecules of alkyl halide are produced as a byproduct of the process involving dialkyl ether. Because of the increased strength of the aryl-oxygen bond, the alkyl-oxygen bond in alkyl aryl ethers is the point of cleavage. The reaction results in the production of phenol and alkyl halide.

As we can see in the given mechanism, after the first step, an intermediate C-O bond is broken by the Br⁻ ion in alcohol, which is an incoming ion via the SN2 mechanism. At this stage, the O-H bond is not broken; only the C-O bond is broken.

The complete question is attached.

You can also learn about SN2 mechanism from the following question:

https://brainly.com/question/7213902

#SPJ4

when phenol is prepared industrially in a process that involves the formation and oxidation of cumene, what industrially important by-product is formed?

Answers

When phenol is prepared industrially in the process that involves the formation and oxidation of cumene, then industrially important by-product acetone is formed.

What by product is formed in the process that involves the formation and oxidation of cumene?

When oxidation of cumene takes place in the presence of air, cumene hydroperoxide is obtained. Phenols are obtained on further treatment of cumene hydroperoxide with dilute acid,  Acetone is produced as one of the by-products of this reaction.

The process of acidifying sodium salt results in phenol. A diazonium salt is created by reacting an aromatic primary amine with nitrous acid (NaNO2 + HCl) at 273-278 K. By heating diazonium salts in water or subjecting them to weak acids, phenols are produced as a byproduct.

To know more about phenol, refer

https://brainly.com/question/17616521

#SPJ4

for a new element, 61.74% is an isotope with mass 281.5 amu, 2.52% is an isotope with mass 283.5 amu, and 35.74% is an isotope with mass 284.5 amu. calculate the average atomic mass of this new element.

Answers

When the definition of atomic mass, isotopes, and average atomic mass of an element are kept in mind, the average mass of the metal is 20. 2. Exactly how does atomic mass mean?

The atomic mass of an element is its average atomic mass given in number of atoms (amu, also known as daltons, D). The atomic mass of a particular element is its arithmetic mean across all of its isotopes.

What does atomic mass look like?

An average atomic value is a number that is the only mass of an isotope of carbon-12. The carbon-12 reference standard is used to represent the mass of any isotope of any element. For illustration, the weight of an atom of information as appropriate is 4.0026 amu.

To know more about atomic mass visit:

https://brainly.com/question/17067547

#SPJ4

What’s the first change that occurs in your cookie dough after you put the pan in the oven?

Answers

Answer:

Butter melts.

Explanation:

identify the major product that is expected when nitrobenzene is treated with br2 in the presence of catalytic albr3 and heat.

Answers

The major product formed when nitrobenzene is treated with br2 in the presence of AlBr3 and heat is m - Bromo nitrobenzene.

Nitrobenzene reacts with Br2 in the presence of AlBr3 to give m-Bromo nitrobenzene as the major product. The σ-complex formed by the attack of Br+ at the meta position is the least destabilized and the most stable among the three σ-complexes. Hence, the nitro group acts as meta directing group. It deactivates the ring.

This is an electrophilic substitution reaction. It takes place in the presence of a catalyst. The catalyst is aluminum chloride. Electrophilic substitution reactions are chemical reactions in which an electrophile displaces a functional group in a compound.

To learn more about Electrophilic Substitution Reaction please visit:

https://brainly.com/question/14803468

#SPJ4

10. sodium tripolyphosphate, na5p3o10, is added to detergents to increase their cleaning power. calculate the number of phosphorus atoms in 0.325 moles of this compound.

Answers

There are approximately 0.975 phosphorus atoms in 0.325 moles of sodium tripolyphosphate.

A phosphorus atom is a type of atom that is made up of protons, neutrons, and electrons. It is one of the chemical elements and is represented by the symbol "P" on the periodic table. Phosphorus is a member of the nitrogen group and is a nonmetal. It is a highly reactive element and is found in several different forms, including white phosphorus, red phosphorus, and black phosphorus.

To calculate the number of phosphorus atoms in 0.325 moles of sodium tripolyphosphate, you need to know the formula for the compound. The formula for sodium tripolyphosphate is Na5P3O10.

Each molecule of sodium tripolyphosphate contains 3 phosphorus atoms. To find the number of phosphorus atoms in 0.325 moles of the compound, you need to multiply the number of phosphorus atoms per mole (3) by the number of moles you have (0.325).

The number of phosphorus atoms in 0.325 moles of sodium tripolyphosphate is:

3 phosphorus atoms/mole * 0.325 moles = 0.975 phosphorus atoms

Learn more about mass, here https://brainly.com/question/30077698

#SPJ4

(a) can a hydrogen atom in the ground state absorb a photon of energy less than 13.6 ev?

Answers

Yes, a hydrogen atom in the ground state can absorb a photon of energy less than 13.6 ev.

The wavelength of the matter waves that make up an electron orbit around a nucleus is the same as the radius of the orbit. Any fractional number would not fit the circle of the electron orbit, but a whole number of wavelengths might. Atomic excitations, in which the electrons take in a photon to enter a higher energy state, are another process that an atom goes through. As a result, electrons' wavelength can shift, which also causes the electron's orbit to alter. The relationship between an electron's energy and wavelength is inverse. An electron in the ground state can therefore absorb a photon with energy equal to the energy difference between the ground state energy and excited state energy during atomic excitation.

know more about atoms here

https://brainly.com/question/13654549#

#SPJ4

how does the mass of the products of a nuclear fusion reaction compare to the mass of the original elements?

Answers

The mass of the products element  of a nuclear fusion reaction is more than  the mass of the original elements.

H2+H2= He

Nuclear fusion is the process by which light elements interact to create heavier elements (up to iron). Significant amounts of energy are released when interacting nuclei from low atomic number elements, like hydrogen (atomic number 1) or its isotopes deuterium and tritium, are involved. Thermonuclear weapons, also known as hydrogen bombs, were created in the decade immediately following World War II and were the first to use the vast energy potential of nuclear fusion. See nuclear weapon for a thorough history of this development. Meanwhile, there has been a significant push to harness nuclear fusion for the generation of power due to the potential peaceful applications of the process and the virtually infinite supply of fusion fuel on Earth.

To know more about  nuclear fusion visit :https://brainly.com/question/16556922

#SPJ4

What is the molarity of 4 g of nacl in 3, 800 ml of solution? molar mass nacl = 58. 44 g/mol.

Answers

The molarity of the solution is 0.018 M.

For the calculation of molarity, we need to use the formula for molarity, put all values in the formula, and then complete the calculation.

formula of molarity= [tex]\frac{number of moles}{volume(L)}[/tex] M

volume of solution is 3800ml or 3.8L

number of moles= [tex]\frac{Given mass}{Molar Mass}[/tex] = [tex]\frac{4}{58.44}[/tex] = 0.06844

where given mass is the  mass of solute that are present in the solution

What is molar mass?

Molar mass is also defied as the sum of atomic masses of all atoms present in the molecule.

molarity = [tex]\frac{0.06844}{3.8}[/tex] = 0.018 M

Hence the molarity of solution is 0.018 M

Click on the following link to learn more about Molarity:

https://brainly.com/question/8732513#

#SPJ4

The picture below shows the snowfall during a snowstorm in New England in 1983.
A. the climate of New England, because it shows the precipitation over a few days

B. the climate of New England, because it shows the precipitation over many decades

C. weather conditions in New England, because it shows the precipitation over a few days

D. weather conditions in New England, because it shows the precipitation over many decades

Answers

The picture given shows the weather of New England, because it shows the precipitation over a few days.

What is the difference between weather and climate?

Climate describes how the weather is in a certain location over a long period of time as opposed to weather, which refers to short-term changes in the atmosphere.

The average of the weather is the climate. As an illustration, you can anticipate snow in the Northeast in January or hot and muggy weather in the Southeast in July. Climate is this. Extreme values, such as record-breaking high temperatures or heavy rainfall, are also part of the climatic record.

The map only shows precipitations only for 2 days hence it is depicting the weather conditions.

To learn more about Climate learn from the link given.

https://brainly.com/question/10440860

#SPJ1

which of the molecules would a flame ionization detector (fid) be sensitive to after separation on a gas chromatography column?

Answers

Hexane bc it is a hydrocarbon is the molecules would a flame ionization detector (fid) be sensitive to after separation on a gas chromatography column.

How does chromatography function and what is it?

Separating mixture's constituent parts by chromatography is a method. The combination is dissolved in a material known as the mobile phase to start the process, which then transports it through a material known as the stationary phase.

What serves as chromatography's primary objective?

Chromatography's goal is to distinguish between the various components of a mixture. Applications can be anything from a straightforward analysis of a compound's purity to a precise breakdown of its constituent parts.

To learn more about chromatography visit:

https://brainly.com/question/26491567

#SPJ4

the atomic symbols of 5 of the elements are the same as the standard abbreviations of 5 of the states of the united states. what are these symbols and the corresponding state names

Answers

The atomic symbols of five of the elements that correspond to the standard abbreviations of five of the states of the United States are:

1. Ne (Nebraska)

2. Ar (Arizona)

3. K (Kansas)

4. In (Indiana)

5. Md (Maryland)

Neon (Ne) is a chemical element with atomic number 10. It is a noble gas that appears as a colorless, odorless, tasteless gas. The abbreviation for the state of Nebraska is NE.

Argon (Ar) is a chemical element with atomic number 18. It is a colorless, odorless, non-flammable gas that is the most common noble gas in Earth's atmosphere. The abbreviation for the state of Arizona is AZ.

Potassium (K) is a chemical element with atomic number 19. It is a silvery-white metal that is very reactive in water. The abbreviation for the state of Kansas is KS.

Indium (In) is a chemical element with atomic number 49. It is a soft, silvery-white metal that is both malleable and ductile. The abbreviation for the state of Indiana IN.

Mendelevium (Md) is a chemical element with atomic number 101. It is a synthetic, radioactive element that occurs as a decay product of certain heavier elements. The abbreviation for the state of Maryland is MD.

For more questions like Atomic symbols click the link below:

https://brainly.com/question/4806827

#SPJ4

Gooey substance made of cornstarch and water, with a name that comes from Dr. Seuss

Answers

The gooey substance which made up of cornstarch and water is the oobleck. It gets it name from Dr. Seuss

Oobleck is a non-newtonian fluid. Oobleck is a suspension, or a substance that has both solid and fluid-like properties. These substances are categorized as non-Newtonian fluids as well. A Newtonian fluid, like water or gasoline, has a constant viscosity. A non-Newtonian fluid's viscosity changes, as you might expect. Examples include oobleck, ketchup, and silly putty.

In his law of viscosity, Sir Isaac Newton described Newtonian fluids. In conclusion, he discovered that Newtonian fluids have a constant viscosity/flow and that changes in temperature or pressure only cause these fluids' flow behavior to vary. This kind of fluid is not affected by stress.

Water is a good example. Its viscosity is affected by temperature. It becomes a solid at 0 degrees Celsius and a gas at 100 degrees Celsius, but between those two points, it behaves normally and maintains a constant viscosity. Applying stress does not change the viscosity of water.

We can learn more about Newtonian fluid here:

https://brainly.com/question/13348313#

#SPJ4

Other Questions
describe exactly how you will prepare 100.0 ml sodium chloride from solid using a volumetric flask and a balance. Please select the word from the list that best fits the definition. statements are uniquea. organizationb. fluencyc. word choiced. voicee. conventionsf. ideas Use Lagrange multipliers to find the maximum and minimum values of the function subject to the given constraint. (If an answer does not exist, enter DNE.)f(x, y) = x2y; x2 + 2y2 = 6 At a specific spot along the coast of North Carolina the continental shelf extensile 65 m from the shoreline into the ocean at that point the depth of the water is 85 m from there the ocean floor sloughs down to the ocean crust which begins 115 m from the show and I added depth of 2700 m find the slope of the ocean floor connecting the edge of the continental shelf in the beginning of the oceanic crust that section of the ocean floor is called the continental slope Which of the following are steps in the ThresholdBraking technique?Repeatedly increase brake pedal pressure with the objective of approachingthe condition of wheel lock-upRelease brake pressure just enough to allow the wheels to begin turningwhen you hear the wheels begin to lock upRepeat a) and b) until the vehicle is stopped safelyAll of the above Change into reported speechMarked asked his sister,"Did you just say you bought a new puppy?" jimmy is a talented musician, and has already won a number of awards. still, he practices about two hours every day, trying to reach his highest potential. jimmy is motivated by self-actualization needs. true or false A pack of 24 coloured pencil cot 2. 88(a) How much i each pencil? Another packet of 18 pencil cot 1. 98. (b) Which et ha the cheapet pencil in it? Focus on gaps between the desired financial outcomes and those actually produced by the firm occurs as part of a) financial analysis b) strategic controls c) accounting controls d) financial controls e) profit techniques . a child has glomerulonephritis and hypertension. which dietary modification is most appropriate for the nurse to suggest? IM SO SORRY HERES THE PIC TO 24 a registered investment adviser that accepts customer funds must: a segregate the funds from proprietary adviser assets b must deposit the funds to the adviser's general bank account c pay interest on the funds at the legal rate specified by the state d provide each customer with an account statement at least monthly You are a security expert asked to protect the webservers hosted in your building from exposure to anyone other than server admins. Which of the following physical security method should you implement to achieve this?Demilitarized zones help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1 in the aria, the singer sings many notes on the first syllable of the word 'mountain' (from 1:22-1:32). this type of vocal ornamental technique is called: what is the npv of a project expected to generate $1,000 a year for 5 years assuming a discount rate of 10% and an initial outlay of $3,250? The process of backing up computer data is? beatrice had a latina supervisor when she worked at the cosmetics counter in a mall department store. the woman treated beatrice very badly, and as a result, beatrice now thinks all latinas are evil and mean. what roadblock to intercultural communication is most relevant here? What is the mass percentage of C in morphine, C7H19NOs? Provide ananswer to two decimal places. What is the name of the animal that Ares transforms into during the fight?