describe exactly how you will prepare 100.0 ml sodium chloride from solid using a volumetric flask and a balance.

Polar molecules' poles point in the direction of the oppositely charged metal plate when they are sandwiched between the plates.

Positive and negative poles are found in opposite poles in polar molecules. For instance, water molecules will have their negative pole facing the positive end and vice versa when they are placed between two metal plates that have opposing charges.

The charges on the metal plate will force them to align themselves since opposing charges repel one another and like charges attract.

Therefore, when polar molecules are sandwiched between two metal plates with opposing charges, the poles will point in the direction of the plate with the opposite charge.

To learn more about metal plates, refer:-

https://brainly.com/question/20078989

#SPJ4

Mass of kmno4 does she need to make the solution is 128.375 g.

Volume = 2.5 L

Concentration = 0.325 M

Potassium permanganate (Molar mass )= 39 + 55 + (16 x 4) = 158 g

Calculate the moles of KMnO₄

Formula

moles = molarity x volume

moles = 0.325 x 2.5

moles = .8125

Calculate the grams of KMnO₄

                   158 g KMnO₄ ------------------ 1 mol

                      x     ------------------ .8125

                           x = (1.95 x 158)/1  

                         x = 128.375 g

The amount of a solute in moles to all the liters of a solution is known as its molarity. The solvent and solute are both present in the solution. The ratio of the moles of a solute to the kilograms of a solvent is known as molality, on the other hand.

To know more about molarity visit:-  

https://brainly.com/question/8732513

#SPJ4

Option A, chlorofluorocarbons(CFC) react to destroy ozone. This leads to various harmful activities on the earth like global warming.

When gaseous CFCs slowly ascend into the stratosphere, are oxidized by strong UV light, release chlorine atoms, and then interact with ozone molecules, they can weaken the ozone layer. Chlorofluorocarbons (CFC) come into touch with the Ozone layer as they rise upward and toward the stratosphere. As a result, the chlorofluorocarbons(CFC) molecules are split apart by UV light, releasing chlorine atoms that can destroy ozone molecules in a chemical process. The stratospheric ozone protects against ultraviolet rays.

learn more about chlorofluorocarbons(CFC) here:

https://brainly.com/question/22669069

#SPJ4

Silver is the best conductor of electricity. Its main disadvantage is that it tarnishes when exposed to air. the native mineral that is the best conductor of electricity.

The Latin argentum and Sanskrit argunas, both meaning "bright," are where the word "Ag" originates. Even in the Stone Age, silver was used. Silver use dates back at least 5000 years, according to archaeological findings. When aesthetics is crucial, it is utilised for silver dinnerware and jewellery. As the greatest known visible light reflector, silver is utilised to build mirrors, even though it tarnishes with time. Electrical connections, batteries, solder and brazing alloys, dental alloys, and other products also use it.

Learn more about silver here:

https://brainly.com/question/6434391

#SPJ4

Here is a detailed flow sheet for the isolation and purification of 1-bromobutane:

Start with a sample of 1-bromobutane, which can be synthesized from butane through a bromination reaction.

Dissolve the 1-bromobutane in a solvent such as diethyl ether or hexane.

Extract the 1-bromobutane from the solvent using a separatory funnel. This can be done by adding a small amount of water to the solvent mixture and shaking it vigorously to allow the 1-bromobutane to dissolve in the water. The 1-bromobutane will then separate from the solvent as an upper layer.

Drain the upper layer of 1-bromobutane into a clean container, being careful to leave any impurities behind in the separatory funnel.

Dry the 1-bromobutane by adding anhydrous magnesium sulfate or another drying agent to the container and stirring the mixture until the drying agent has absorbed any moisture.

Filter the 1-bromobutane through filter paper to remove any solid impurities.

Distill the 1-bromobutane to purify it further. This can be done by heating the 1-bromobutane in a distillation setup and collecting the distillate as it comes off the still. The 1-bromobutane will boil at a higher temperature than most impurities, so it will be collected in a separate fractions.

Once the 1-bromobutane has been distilled, it can be collected and stored for future use. It is important to handle 1-bromobutane with care, as it is flammable and can be harmful if inhaled or ingested.

To know more about isolation and purification visit :

https://brainly.com/question/14893616?referrer=searchResults

#SPJ4

Here is a detailed flow sheet for the isolation and purification of 1-bromobutane:

Start with a sample of 1-bromobutane, which can be synthesized from butane through a bromination reaction.

Dissolve the 1-bromobutane in a solvent such as diethyl ether or hexane.

Extract the 1-bromobutane from the solvent using a separatory funnel. This can be done by adding a small amount of water to the solvent mixture and shaking it vigorously to allow the 1-bromobutane to dissolve in the water. The 1-bromobutane will then separate from the solvent as an upper layer.

Drain the upper layer of 1-bromobutane into a clean container, being careful to leave any impurities behind in the separatory funnel.

Dry the 1-bromobutane by adding anhydrous magnesium sulfate or another drying agent to the container and stirring the mixture until the drying agent has absorbed any moisture.

Filter the 1-bromobutane through filter paper to remove any solid impurities.

Distill the 1-bromobutane to purify it further. This can be done by heating the 1-bromobutane in a distillation setup and collecting the distillate as it comes off the still. The 1-bromobutane will boil at a higher temperature than most impurities, so it will be collected in a separate fractions.

Once the 1-bromobutane has been distilled, it can be collected and stored for future use. It is important to handle 1-bromobutane with care, as it is flammable and can be harmful if inhaled or ingested.

To know more about isolation and purification visit :

brainly.com/question/14893616?referrer=searchResults

#SPJ4

When a hydrogen atom forms a covalent link with an N, O, or F atom, hydrogen bonding takes place. Only a few substances that contain hydrogen can form a hydrogen bond.

An attraction involving two atoms that also take part in other chemical connections is known as a hydrogen bond. Any electronegative oxygen, including oxygen, chlorine, or fluorine, may make up the other atom, whereas one of the atoms is hydrogen. Between atoms or between two different molecules, hydrogen bonds can develop between the atoms.

Examine the material's Lewis structure to determine whether hydrogen bonds are conceivable. As with carbon and nitrogen, a electronegative atom requires one or more unbounded electron pairs and a minus partial charge.

To know more about Hydrogen bond visit:

https://brainly.com/question/21054466

#SPJ4

From the given conditions in the question, it is evident that a protein has been made from the polymerization of amino acids.

Amino acids are defined as the substances which are considered to be the monomers of proteins.Every amino acid has the same structure consisting of a central carbon which is bonded to an amino group , carboxyl group and a hydrogen.

Each amino acid also has another atom or a group of atoms bonded to the alpha carbon which are also known as the R group or the variable group of the side chain.There are 20 common amino acids present in natural proteins and each amino acid has the same backbone.

Learn more about amino acids,here:

https://brainly.com/question/28409615

#SPJ1

The molar mass of a gas with an average velocity of 369 m/s at 350. k provide answer in g/mol to 3 significant figures is 64.1 g/mol.

Calculation:-

(Velocity)² = 3RT/M

M = 3RT/(velocity)²

= 3x8.3145J/k.mol x 350k/(369m/s)²

= 0.0641 kg/mol.

Molar mass = 64.1 g/mol

Average velocity is a measure of total displacement divided by using overall time. the whole displacement is the space between the start and endpoints. seeing that the auto movements from point A at both the start and stop points the entire displacement is zero and the average speed is likewise 0.

Speed is the gap traveled consistent with unit of time, the velocity of motion. the velocity of a automobile visiting on a smooth, flat section of a motorway with out visitors congestion is steady and now not zero. Acceleration is the rate of exchange of speed. The purpose is simple. pace is the percentage of time an object movements alongside a path and speed is the rate and course of an object's movement.

Learn more about Velocity here:-https://brainly.com/question/25749514

#SPJ4

The decision is not valid for a liquid in a glass capillary with a convex meniscus since the liquid's behavior is strongly influenced by its interactions with the glass. As a result, choice D is right.

Glass capillaries have external sizes that range greatly, from 0.1 mm to 2.0 mm. For the purpose of gathering x-ray data, they are designed to mount, hold, and store biological macromolecular crystals as well as small molecules.

The water in a thin tube submerged in water rises due to the forces of attraction between the water molecules and the glass walls as well as the water molecules themselves.

The gravitational pull of the water column, which has risen to a characteristic height, is only balanced by these attractive forces.

Therefore, choice D is correct.

To know more about convex meniscus visit:-

https://brainly.com/question/24666570

#SPJ4

Answer: antimycin A is more potent than rotenone.Rotenone only inhibits electrons flow into the election transport chain at Complex 1 (electrons from NADH are restricted) Complex II (electrons for fatty acyl-CoA and FADH2) does not get affected by rotenone and so even though ETC becomes slow it does not stop completely.

Explanation:

Changing the coefficients solely affects the quantity of molecules in that specific chemical. However, modifying the subscripts will change the substance itself, rendering your chemical equation incorrect. The correct option to this question is step 2.

Chemistry makes good use of the ability to balance chemical equations. The concept that atoms and molecules commonly interact to form new molecules is the foundation of chemical reactions.

(1) Use word equations to describe the chemical reaction, placing the reactants on the left and the products on the right. (2) Include the symbol and formula for each reactant and product in the equation in words. (3) Balance the equation by multiplying the formula and symbol numbers by the lowest integers.

Balancing a chemical equation is crucial for understanding a chemical reaction. This is to reveal the number of moles that are reacting and generating. It also indicates how many electrons were moved from one chemical to another.

For more information on  balanced equation kindly visit to

https://brainly.com/question/15625712

#SPJ4

The new pressure is 0.929atm.

Solution:

2*2.4L/298K = P₂ * 5.6L/323K

P₂ = 0.929atm.

So, Now the pressure will be 0.929atm.

Force normal to the surface of an object per unit area over which that force is distributed. At a point in the gas, pressure acts in all directions. At the surface of a gas, compressive forces act perpendicular to the surface. If the gas is moving as a whole, the measured pressure will be different in the direction of movement.

A simple example of pressure can be seen by holding a knife against a piece of fruit. Placing the flat part of the knife on the fruit will not cut the surface. The force is distributed over a wide area. Pressure is defined as the physical force exerted on an object. The force applied is normal to the surface of the object per unit area.

Learn more about Pressure here:- https://brainly.com/question/28012687

#SPJ4

The molarity of a commercial grade of HCl solution with a density of 1.20 g/ml is 12.8 M.

The term "molar concentration" (also known as "molarity," "amount concentration," or "substance concentration") refers to the amount of a substance per unit volume of solution and is used to describe the concentration of a chemical species, specifically a solute, in a solution.

The most common measure of molarity in chemistry is the number of moles per litre, denoted by the unit symbol mol/L or mol/dm3 in SI units. A solution with a concentration of 1 mol/L is referred to as 1 molar, or 1 M. The most popular unit of measurement for molal concentration or molarity is moles of solute per litre of solution.

Learn more about molarity

https://brainly.com/question/14469428

#SPJ4

Answer:

This is because the carbonate ion (CO32-) is a base, and when it reacts with an acid, it neutralizes the acid and forms a salt. The carbon dioxide that is produced is a byproduct of this reaction.

Explanation:

The reaction between an acid and a carbonate can be represented by the following general equation:

Acid + Carbonate --> Salt + Water + Carbon Dioxide

For example, the reaction between hydrochloric acid (HCl) and sodium carbonate (Na2CO3) can be written as:

HCl + Na2CO3 --> 2NaCl + H2O + CO2

In this equation, hydrochloric acid and sodium carbonate react to form sodium chloride (table salt), water, and carbon dioxide.

It's important to note that not all acids will react with carbonates. For example, sulfuric acid (H2SO4) is a strong acid, but it does not react with carbonates. This is because sulfuric acid is a strong dehydrating agent and will remove water from the reaction, preventing the formation of carbon dioxide.

Explanation:

According to Graham's law, rate of diffusion is incresely proportional to the square roots of its molecule weight.

Let m be the mass of the unknown gas

m2 is the mass of oxygen 

r1 = rate of diffusion of the unknown gas 

r2 = rate of diffusion of oxygen

r2r1=m1m2

Given r2r1=4

thus 4=m132 

Squaring boil sides

16=m32

m1=2g

PLEASE MARK AS BRAINLIEST

The right answer is true. It is accurate to say that because liquids and solids are almost incompressible, pressure has little impact on their solubility.

We are aware that the concept of compressibility refers to how the study object's qualities can alter simply by applying pressure on it. Whether or not a solid, liquid, or gas can have a solubility that is influenced by the substance's pressure depends on the compressibility factor. We must keep in mind that when we discuss pressure in science, our thoughts must immediately turn to the force per unit area of the substance that is being investigated in each specific example. Because the solid and liquid have a fixed volume while the gas does not, the gas will take on the volume of the container it is carried in, proving that the solid and liquid are less compressible than the gas.

Learn more about compressibility here:

brainly.com/question/23026638

#SPJ4

It is accurate to say that because liquids and solids are nearly incompressible, pressure has minimal impact on their solubility.

Pressure has very little or no impact on how easily particles dissolve in liquid. This is due to the fact that solids and liquids are largely unaffected by changes in pressure due to their incompressibility. The solubility, which depends on gas pressure, is a measurement of the concentration of dissolved gas particles in the liquid. A gas's solubility increases with higher pressure while falling with lower pressure because of an increase in collision frequency. · The solubility of liquids and solids is mostly unaffected by external pressure. The concentration of dissolved gas molecules in the solution at equilibrium is higher at higher pressures because the concentration of molecules in the gas phase rises with increasing pressure.

To know  more about solubility click here brainly.com/question/28170449

#SPJ4

Answer:

computer is a device used to make work easy and comfort

By producing light, the electrons let off part or all of their extra energy.But an electron and a proton are attracted to one another.Another way to put it is that opposite charges attract each other whereas the same or "like" charges repel one another.

Smaller subatomic particles make up protons and neutrons.Protons and neutrons exchange particles (mesons) when they are sufficiently close to one another, which fuses them together.When they are tied, it takes a lot of energy to unbind them.

No, I cannot.Because protons and electrons are separate species, this is the case.A proton and an electron can both annihilate with just an anti-proton (positron), but not the other way around.

To know more about electron tay thi visit:

https://brainly.com/question/7507941

#SPJ4

Because it improves food preservation and breaks down the sugars in the dough, the dough is fermented and proofed.

The ideal temperature for fermentation is 85° F.

What is fermentation?

Anaerobic degradation of molecules like glucose occurs chemically during fermentation.

What is proofing?

When making yeast bread and other baked goods, the process of proving involves letting the dough rest and rise one last time before baking. While the dough is resting, yeast ferments it and releases gases, leavening the dough.

To learn more about fermentation:

https://brainly.com/question/20073558

#SPJ4

Answer:

It's a liquid

Explanation:

The (l) is one of the four state symbols. You also have (s) for solid, (g) for gas and (aq) for aqueous - something in a solution. Hope this helps!!

Answer:

liquid

Explanation:

the scientific symbol of liquid is represented by l

The first step of the reaction, we have  reaction between a nucleophile and an electrophile.

We can see that in the first step of the reaction, we have  reaction between a nucleophile and an electrophile. In this case, the electrophile would have to be an alkyl halide which produces a carbocation as show in the image attached. What we have here is quite similar or  like most of the organic reactions, this reaction occurs in a number of detailed or smaller steps and each step of the reaction is going to help to bring us closer to the end product of the entire steps of the reaction which is wat we target as we carry out the particular reaction.The second step involves the reduction of the alkyne with the use of a Lindlar catalyst. As such the reaction is poisoned and it stops at the alkyne stage rather than going on to obtain the alkane.

Learn more about electrophile here:

https://brainly.com/question/21773561

#SPJ4

Five tubes with initial concentration of 1650 mg/dl , are used in the dilution.  The diluted concentrations in each tube are 330 mg/dl, 825 mg/dl, 412.5 mg/dl, 330 mg/dl, and 165 mg/dl, respectively.

A multiple dilution is a process of diluting a sample with a known concentration to create a series of dilutions that can be tested further. In this case, a sample with an initial concentration of 1650 mg/dl is to be diluted in five tubes. The dilution concentrations are 1/5 (tube 1), 1/2 (tube 2), 1/4 (tube 3), 1/5 (tube 4), and 1/10 (tube 5).

To calculate the diluted concentration in each tube, the initial concentration must be multiplied by the dilution factor. The dilution factor is the inverse of the dilution ratio. For example, for a 1/5 dilution, the dilution factor is 5.

The diluted concentration in each tube is then as follows:

Tube 1: 1650 mg/dl x 1/5 = 330 mg/dl

Tube 2: 1650 mg/dl x 1/2 = 825 mg/dl

Tube 3: 1650 mg/dl x 1/4 = 412.5 mg/dl

Tube 4: 1650 mg/dl x 1/5 = 330 mg/dl

Tube 5: 1650 mg/dl x 1/10 = 165 mg/dl

Therefore, the diluted concentrations in each tube are 330 mg/dl, 825 mg/dl, 412.5 mg/dl, 330 mg/dl, and 165 mg/dl, respectively.

Learn more about dilution factor at :https://brainly.com/question/20113402

#SPJ4

TRUE, In a distillation process the one with the lower boiling point liquid component of the mixture passes through the condenser first

Simple distillation, as opposed to fractional distillation, is used to separate constituents in combinations with extremely different boiling temperatures. Fractional distillation is used for mixes comprising compounds with equivalent boiling points. Equipment for simple distillation consists of a distillation flask connected to a condenser. In contrast, the apparatus used for fractional distillation is the same as that for simple distillation with the exception of the installation of a second fractionating column between the condenser and the distillation flask. Fractional distillation employs a challenging apparatus called a fractionating column. A flask to contain the mixture, a condenser, and a flask to gather the purified components are the only components needed for the setup. Fractional distillation is used in the refinement of crude oil.

Learn more about distillation here:

https://brainly.com/question/29037176

#SPJ4

The amount of reactant and product that changes per unit of time is the rate expression for the reaction. The change in reactant and product concentration over time is depicted by the rate expression.

Although it is unnecessarily simplified, the rate expression (3.35) has been found to be extremely useful in many situations. Let's define a basic reaction so that we can continue our conversation. A reaction is considered to be elementary if the reactants (or reacting molecules) always respond stoichiometrically. For instance, in an elementary reaction, A and B can spontaneously transform into C when they come into contact without needing to do any further action. Therefore, idealised reactions or reaction stages are considered elementary reactions.

The rate of disappearance of ozone is the rate of difference of O3 is divided by 2.

Learn more about rate expression here

https://brainly.com/question/22038406

#SPJ4

The statement that is correct about the system is  ∆H = +590 kJ.

We know that according to the first law of thermodynamics, energy can not be created nor destroyed but It can be converted from one form to the other. This implies that we can not loose energy, the energy that is supplied as the pork is combusted can be transferred to the water.

As such, we can be able to obtain the heat that enthalpy of the system can be obtained as the heat that is transferred to the water as follows;

∆H =  mc dT

∆H =  heat absorbed or evolved

m = mass of the water

c = Heat capacity of the water

dT = temperature change

Now we have;

∆H =  3000 * 4.184  * 47

∆H = +590 kJ

The magnitude of heat that has been transferred to the water is +590 kJ.

Learn more about thermodynamics:https://brainly.com/question/1368306

#SPJ1

Missing parts;

A 50 gram sample of delicious pork rinds is placed in an open, constant pressure calorimeter that contains 3000 grams of water. The temperature of the water increases by 47◦C when the pork rinds are combusted. The heat capacity of water is 4.184 J/g ◦C. Assume the heat lost to the calorimeter itself or to the air is negligible. Which of the following is correct for the SYSTEM?

1.) ∆U = +590 kJ

2.) ∆U = −11.8 kJ

3.) ∆H = −11.8 kJ

4.) ∆H = +590 kJ

5.) ∆U = −590 kJ

6.) ∆H = +11.8 kJ

7.) ∆U = +11.8 kJ

8.) ∆H = −590 kJ

Hg2+ is Lewis Acid.

According to the Lewis definition, a species that donates a lone pair of electrons acts as a Lewis base, and a species that accepts a lone pair of electrons acts as a Lewis acid.

In other words, a neutral or negatively charged species with a lone pair of electrons can act as a Lewis base, and a species with an empty orbital (an incomplete octet) which can acquire a lone pair of electrons are Lewis acid.

In case of the following reaction: hg2+(aq)+4cn−(aq)⇌hg(cn)42−(aq)

Here, the Hg2+ ion receives four pairs of electrons from the CN- ions because it possesses vacant orbitals.

So, Hg2+ is Lewis acid here.

To know more about Lewis acid here:

https://brainly.com/question/15570523#

#SPJ4

Structural and Organic Formula of Acetone: Acetone Formula (C3H6O) (Propanone) So, Both propanal and propanone are isomers of the substance having the chemical formula C 3 H 6 O.

A substance in science that is created through the chemical joining of two or more distinct elements Table salt (NaCl), which is derived from the elements sodium and chloride, and water (H2O), which is created from the elements hydrogen and oxygen, are two examples of compounds.

Because water molecules make up its composition, water is a compound. Atoms made of water don't exist. Hydrogen and oxygen atoms are found in a certain ratio of two hydrogen atoms to one oxygen in the structure of water molecules.

To know more about Compound visit:

https://brainly.com/question/19458442

#SPJ4

Particulate Contamination Workplace Respiratory Hazards is a type of respiratory hazard which usually consist of gaseous material and particulate and result from operation such paint praying.

Respiratory hazard is a type of hazard being exposed to worker of employees in a certain condition and situation in his/her workplace ranging from lack of oxygen as well as exposure of hazardous materials such as gas, dust, mites, fumes, smokes, and contamination such as biological (viral and bacterial) contamination, etc which may result in a respiratory disease and problems. There are four types of respiratory hazards namely Oxygen-deficient hazard, gas or vapor respiratory hazard, particulate contamination respiratory hazard, and biological contamination hazard.

To learn more about particulate visit: https://brainly.com/question/3610572

#SPJ4

Your question seems to be missing but I assume your question was:

"________  is a type of respiratory hazard which usually consist of gaseous material and particulate and result from operation such paint praying."