The government's decision to use increased tax revenues to provide more welfare benefits for the poor is an example of a redistributive policy. This is because redistributive policies aim to redistribute resources, such as wealth or income, from one group to another.The correct option is redistributive policy.
In this case, the government is taking resources (tax revenues) from those who have more and redistributing them to those who have less (the poor). Redistributive policies are often seen as a way to address economic inequality and promote social welfare. By providing more benefits to the poor, the government aims to improve their standard of living and reduce poverty.
However, redistributive policies can also be controversial, as they involve taking resources from some individuals or groups and giving them to others.Overall, the government's decision to use increased tax revenues to provide more welfare benefits for the poor is an example of a redistributive policy that aims to address economic inequality and promote social welfare.The correct option is redistributive policy.
For more such questions on tax revenues
https://brainly.com/question/30891543
#SPJ11
SECTION 1-3 Weekly Time Card
When you work for a business that pays on an hourly basis, you are usually required to keep a timecard. The timecard shows the time you reported for work and the time you departed each day.
Total Hours = Sum of Daily Hours
_______________________________________________________
Compute the hours worked for each day on the timecards. Round each half of the day to the nearest quarter hour. What are the total hours for the week? What is the total pay for the week?
HOURS
1.
Date
In
Out
In
Out
Hours
Temporary Employee TimeCard
9/13
7:00
11:00
11:30
4:45
NAME: Amalian Tacket
DEPT: Accounting
9/14
9/15
8:15
8:10
11:35
12:00
12:30
12:40
4:35
4:10
Note: no overtime rate
9/16
9/17
8:20
7:05
11:50
11:09
12:50
11:50
4:50
3:30
EMPLOYEE SIGNATURE
RATE PER HOUR: $8. 50 TOTAL HRS
2.
Date
In
Out
In
Out
Hours
Temporary Employee TimeCard
4/5
8:00
12:00
1:00
5:00
NAME: Akina Tanaka
DEPT: Auto Parts
4/6
4/7
8:10
7:55
11:40
12:05
12:40
12:55
4:10
5:20
Note:Overtime is 1
½ on hrs over 40
4/8
4/9
4/10
8:30
7:50
7:30
11:35
11:55
11:45
12:15
12:40
4:30
5:00
Employee Signature
EMPLOYEE SIGNATURE
RATE PER HOUR: $8. 40 TOTAL HRS
3.
Date
In
Out
In
Out
Hours
Temporary Employee TimeCard
8/8
7:00
11:15
12:10
4:10
NAME: Eugene Mueller
DEPT: Sales
8/9
8/10
6:50
7:10
11:00
11:46
11:50
12:34
4:00
3:58
Note: no overtime rate
8/11
8/12
7:10
7:05
11:10
10:55
12:00
11:41
4:35
3:25
Employee Signature
EMPLOYEE SIGNATURE
RATE PER HOUR: $7. 50 TOTAL HRS
4.
Date
In
Out
In
Out
Hours
Temporary Employee TimeCard
3/19
3:30
7:30
8:15
12:10
NAME: Nina Surovy
DEPT: Factory Shop
3/20
3/21
3:25
3:32
7:40
7:29
8:30
8:10
11:25
11:30
Note:Overtime is 1
½ on hrs over 40 and all Saturday hrs
3/22
3/23
3/24
3:23
3:40
12:15
7:25
7:40
6:15
8:05
12:00
EMPLOYEE SIGNATURE
RATE PER HOUR: $13. 28 TOTAL HRS
Here are the hours worked for each day on the timecards: Total pay for the week: $236.85 (31.58 hours * $7.50/hour)
Amalian Tacket - Accounting
Date In Out In Out Hours
9/13 7:00 11:00 11:30 4:45 8.75
9/14 - - - - 0
9/15 8:15 - 11:35 12:00 3.5
9/16 8:20 11:50 12:50 4:50 7.5
9/17 7:05 11:09 11:50 3:30 7.58
Total hours for the week: 27.33
Total pay for the week: $233.33 (27.33 hours * $8.50/hour)
Akina Tanaka - Auto Parts
Date In Out In Out Hours
4/5 8:00 12:00 1:00 5:00 8.0
4/6 - - - - 0
4/7 8:10 12:05 12:40 5:20 8.75
4/8 8:30 11:35 12:15 4:30 7.33
4/9 7:50 11:55 12:40 5:00 8.08
4/10 7:30 11:45 12:40 5:00 8.0
Total hours for the week: 40.16
Total pay for the week: $358.06 ((40 - 40 regular hours) * $8.40/hour + (0.16 overtime hours) * $12.60/hour + 40 regular hours * $8.40/hour)
Eugene Mueller - Sales
Date In Out In Out Hours
8/8 7:00 11:15 12:10 4:10 8.25
8/9 - - - - 0
8/10 6:50 11:46 11:50 3:58 7.66
8/11 7:10 11:10 12:00 4:35 8.25
8/12 7:05 10:55 12:00 3:25 7.42
Total hours for the week: 31.58
Total pay for the week: $236.85 (31.58 hours * $7.50/hour)
Nina Surovy - Factory Shop
Date In Out In Out Hours
3/19 3:30 7:30 8:15 12:10 8.08
To know more about Sales HERE
https://brainly.com/question/25743891
#SPJ4
The procurement process supports _____ component of Porter's Value Chain.Question 23 options:A) inbound logisticsB) operationsC) outbound logisticsD) customer service
The operations part of Porter's Value Chain is supported by the procurement process. Option B is Correct.
The function of procurement has a very specific meaning in the context of Porter's modeling: "Responsible for the acquisition of inputs, or resources, for the firm." Therefore, according to this paradigm, the task of procurement is primarily concerned with purchasing goods such as materials, commodities, or products.
The Porter value chain is a methodology for creating an analytical structure that tracks interdependent actions from the procurement of raw materials or ideas through manufacturing and, ultimately, into the hands of a client. Purchases of services, raw materials, and various components tend to serve operations' demands in procurement. Additionally, it can satisfy the demands made during efforts to distribute physical goods, produce new goods and services, and outsource crucial operations. Option B is Correct.
Learn more about procurement visit: brainly.com/question/21011661
#SPJ4
The procurement process supports the inbound logistics component of Porter's Value Chain.
According to Porter's Value Chain, a business must go through a series of tasks or procedures in order to add value for its clients. Michael Porter created the framework, which he first described in his book "Competitive Advantage: Creating and Sustaining Superior Performance."
The actions involved in receiving, storing, and distributing inputs or commodities required for the production process are referred to as the inbound logistics component. This component's procurement is a crucial part because it entails finding the proper suppliers and materials at the right price. Businesses may enhance their inbound logistics and eventually provide more value to customers by making sure the procurement process is efficient and effective.
To know more about Porter's Value Chain
brainly.com/question/30389363
#SPJ11
explain why the reaction shifted using phrases such as (increased/decreased concentration of reactants/products). refer to secondary reactions when appropriate.
Changes in temperature, pressure, the quantity of reactants or products, and the presence of catalysts or inhibitors are just a few of the variables that can cause chemical reactions to vary.
In a chemical reaction, when the concentration of reactants increases, the reaction shifts towards the products to maintain equilibrium. This is because the increased concentration of reactants provides more particles to react, leading to the formation of more products. Similarly, if the concentration of products decreases, the reaction will also shift towards the products to compensate for the loss. On the other hand, if the concentration of products increases or the concentration of reactants decreases, the reaction shifts towards the reactants to re-establish equilibrium. In this case, the reverse reaction is favored to consume the excess products or to replenish the diminished reactants. Secondary reactions, which are additional reactions that may occur simultaneously, can also influence the shifting of the primary reaction. If a secondary reaction consumes a product or reactant, it can affect the concentrations in the primary reaction, leading to a shift towards the products or reactants as needed to maintain equilibrium.
To learn more about reactants refer here:
https://brainly.com/question/13005466
#SPJ11
International Business
17. A largely sustainable structure
18. The profitability category incorporating selling more in existing markets and expanding into new markets
19. Another way to consider customization as a multi-domestic strategy
20. A nation state economy enjoyed by many state owned enterprises
Answers options:
Global Integration
Entry modes
Global matrix
Natural resources
Maximizing prices
Foreign exchange
Non-equity
Home-to-host
Transition
Collaborative transactions
Economic integration
Efficiency
Innovation
The Deltas
Mercantilism
Global Integration
Local responsiveness
17) A largely sustainable structure refers to a business model that focuses on reducing environmental impact, promoting social responsibility, and ensuring long-term economic viability. This includes practices such as reducing waste and emissions, using renewable energy sources, and investing in social initiatives.
18)The profitability category incorporating selling more in existing markets and expanding into new markets refers to a business strategy aimed at increasing revenue and profits through both market penetration and market development. This involves increasing sales of existing products or services in current markets while also expanding into new markets.
19)Another way to consider customization as a multi-domestic strategy refers to a business approach that emphasizes tailoring products, services, and marketing strategies to meet the specific needs of local markets. This involves customizing products to meet local preferences and adapting marketing messages to resonate with local consumers.
20) A nation-state economy enjoyed by many state-owned enterprises refers to an economic system where the government owns and controls key industries and enterprises. This includes industries such as transportation, energy, and telecommunications. By owning and operating key industries, the government can exert greater control over the economy and promote economic development.
To know more about business model click here
brainly.com/question/13397493
#SPJ11
Use the following information to answer the questions below. Assume that the capital account is equal to zero.
Exports of goods and services
540
Primary income received
20
Secondary income received
380
Imports of goods and services
270
Primary income paid abroad
180
Secondary income paid
10
Net acquisition of financial assets
700
Net incurrence of liabilities
80
Net change in financial derivatives
100
What is the trade balance?
(Enter your response as a whole number.)What is the current account balance? (Enter your response as a whole number.)What is the financial account balance? (Enter your response as a whole number.)What is the statistical discrepancy? (Enter your response as a whole number.)
The trade balance is the difference between exports of goods and services and imports of goods and services, which is 270.
The current account balance is the sum of the trade balance, primary income received, and secondary income received, minus primary income paid abroad and secondary income paid, which is 480.
The financial account balance is the sum of net acquisition of financial assets, net incurrence of liabilities, and net change in financial derivatives, which is 880.
The statistical discrepancy is calculated by ensuring that the sum of the current account balance and financial account balance is equal to zero, which results in a value of -1360.
the balance of payments, which is a record of a country's transactions with the rest of the world over a given period of time. The balance of payments is an important tool for understanding a country's international economic relations and can provide insights into trends in trade, investment, and capital flows.
Learn more about services here:
https://brainly.com/question/30418810
#SPJ11
Computers are assembled in a process with two resources.
The first resource has a capacity of 10 computers per hour. The capacity of the second resource is 13 computers per hour.
The first resource has 1 worker and the second resource has 7 workers.
Demand for this process is 5.9 computers per hour. Wage are $12 per hour.
What is the cost of direct labor?
The cost of direct labor for this computer assembly process can be calculated by considering the number of workers at each resource and their respective hourly wages.
Resource 1 has 1 worker, while Resource 2 has 7 workers. The combined total is 8 workers. The wage for each worker is $12 per hour.
To calculate the total cost of direct labor, simply multiply the number of workers (8) by their hourly wage ($12):
8 workers * $12 per hour = $96 per hour
The cost of direct labor for this process is $96 per hour.
https://brainly.com/question/31485853
#SPJ11
The following table shows the hourly output per worker measured as quarts of olive oil and pounds of pasta in Greece andItaly:The following table shows the hourly output per worker measured as quarts of olive oil and pounds of pasta in Greece and Italy:The opportunity cost of producing one more quart of olive oil in Greece is pounds of pasta. (Enter your response rounded to two decimal places.) The opportunity cost of producing one more quart of olive oil in Italy is | pounds of pasta. (Enter your response rounded to two decimal places.) The opportunity cost of producing one more pound of pasta in Greece is quarts of olive oil. (Enter your response rounded to two decimal places.) The opportunity cost of producing one more pound of pasta in Italy is quarts of olive oil. (Enter your response rounded to two decimal places.)
The opportunity costs for producing one more quart of olive oil and one more pound of pasta in both Greece and Italy.
Calculate the opportunity costs?
To calculate the opportunity costs, we need the hourly output per worker for olive oil and pasta in Greece and Italy. Unfortunately, the data from the table is missing in your question. Please provide the data from the table so that I can calculate the opportunity costs for producing one more quart of olive oil and one more pound of pasta in both Greece and Italy.
Learn more about opportunity costs.
brainly.com/question/13036997
#SPJ11
Why is rent seeking individually rational but socially wasteful?
A. Rent-seeking activity reflects the actions of individuals who spend resources trying to influence public policy in the hope of redistributing income to themselves from others; it is simply a transfer activity, not a production activity.
B. If a market is monopolized, part of the consumers’ surplus that is lost to sellers becomes profits for the monopolist. Monopolists already maximize their profits; this reflects a socially wasteful endeavor.
C. Rent-seeking activity is the payment in excess of opportunity costs. Seeking economic rent is socially wasteful, although individually rational, because it involves a sunk cost.
D. The government must approve any rent-seeking activity; given the culture in Congress, this is a socially wasteful endeavor.
Rent-seeking activity is individually rational because it allows individuals to obtain economic rent, which is payment in excess of opportunity costs.
Rent-seeking activity is individually rational because it allows individuals to obtain economic rent, which is payment in excess of opportunity costs. However, this activity is socially wasteful because it involves a sunk cost and does not produce any additional value for society. Instead, it simply redistributes income from one group to another. Therefore, while rent-seeking may be rational for the individual, it is not beneficial for society as a whole. The answer is C.
Learn more about economic rent here
https://brainly.com/question/2052288
#SPJ11
QUESTION 1
The IRR is a rate of return at which the NPV is equal to zero.
True
False
5 points
QUESTION 2
IRR provides information about a project's safety margin.
True
False
5 points
QUESTION 3
Consider the following two projects.
Project A: IRR=15%, Cost of capital = 12%
Project B: IRR=18%, Cost of capital=20%
Project B should be chosen.
True
False
True
5 points
False
5 points
True
5 points
Project B should be chosen.
False
5 points
Question 1 is True.
Question 2 is False.
Question 3 is False.
Question 1
IRR is used to assess the profitability of a possible investment. IRR is the discount rate at which the future cash flows have a net present value (NPV) of zero.
Question 2
IRR reveals a project's expected rate of return, but it does not provide its safety margin. The term "safety margin" describes how risky a project's expected returns are. A project might have a high IRR. However, if the assumptions used to calculate the IRR are wrong or imprecise, the actual returns may differ greatly from the forecasted returns, lowering the project's safety margin.
Question 3
Since Project A has a positive net present value (NPV) and is anticipated to produce a return greater than the cost of capital, it will be a better choice than Project B given that all other factors remain the same for the two projects.
To know more about IRR,
https://brainly.com/question/29581665
True
5 points
False
5 points
True
5 points
Project B should be chosen.
False
5 points
Question 1 is True.
Question 2 is False.
Question 3 is False.
Question 1
IRR is used to assess the profitability of a possible investment. IRR is the discount rate at which the future cash flows have a net present value (NPV) of zero.
Question 2
IRR reveals a project's expected rate of return, but it does not provide its safety margin. The term "safety margin" describes how risky a project's expected returns are. A project might have a high IRR. However, if the assumptions used to calculate the IRR are wrong or imprecise, the actual returns may differ greatly from the forecasted returns, lowering the project's safety margin.
Question 3
Since Project A has a positive net present value (NPV) and is anticipated to produce a return greater than the cost of capital, it will be a better choice than Project B given that all other factors remain the same for the two projects.
To know more about IRR,
https://brainly.com/question/29581665
An increase in infrastructure projects, such as new parks and roads, initiated by the federal government is a likely signal that WHAT condition is present in the U.S. economy? All of these answers are correct O A recognized period of recession Slow economic growth Increased levels of unemployment Who suggested that government intervention should focus on influencing aggregate demand when dealing with an economic recession? John Maynard Keynes O Paul Krugman Alan Greenspan Janet Yellen
An increase in infrastructure projects, such as new parks and roads, initiated by the federal government is a likely signal that slow economic growth condition is present in the U.S. economy.
John Maynard Keynes suggested that government intervention should focus on influencing aggregate demand when dealing with an economic recession.An increase in infrastructure projects, such as new parks and roads, initiated by the federal government is typically a response to slow economic growth. By investing in infrastructure, the government is trying to stimulate economic activity, create jobs, and increase consumer spending. This type of investment can have a positive impact on both short-term and long-term economic growth.
Learn more about economy here:
https://brainly.com/question/2421251
#SPJ11
An increasing-cost industry is so named because of the positive slope of which curve?
A) Each firm's short-run average cost curve
B) Each firm's short-run marginal cost curve
C) Each firm's long-run average cost curve
D) Each firm's long-run marginal cost curve
E) The industry's long-run supply curve
An increasing-cost industry is so named because of the positive slope of the industry's long-run supply curve. Therefore, the correct option is E.
An increasing-cost industry has a positive slope in its long-run supply curve because as output increases, the input costs also increase. As output increases, the cost of production increases due to various factors such as scarcity of resources, limited availability of skilled labor, and higher input costs. This occurs when resources become more expensive as more firms enter the industry and compete for those resources.
In this scenario, as the industry expands, the average cost of production for each firm increases, resulting in a positively sloped long-run supply curve for the industry. Hence, the correct answer is option E: the industry's long-run supply curve.
Learn more about Supply curve:
https://brainly.com/question/15869064
#SPJ11
Ali Hadad, division manager for Worldwide Textiles, Inc., is meeting with his management team to discuss workplace accommodations for physically disabled workers at Worldwide Textile’s multiple factory locations. His senior plant manager, Randy Albright, says, "I want to install adaptive tools and other systems to allow our disabled workers to be more productive and comfortable, and I want to train all of our employees to be supportive of disabled workers." The corporate counsel, Jill St. Michaels, replies, "As you know, those steps go way beyond what is required by law, and I advise that they not be approved. We need to focus only on preventing and detecting illegal behavior toward disabled workers and punishing those who violate discrimination laws." And the division financial manager says, "Do we really want to spend money on new equipment and training if we are not required to do so?" Ali concludes, "I approve Randy’s request. I want us to make decisions on the basis of right and wrong, not just on the basis of what is legal and not. I want our employees to know that we are an ethical organization in which they can take pride and satisfaction."
Randy is advocating steps that would be consistent with a(n) ______ ethics program.
competency-based
integrity-based
rule-based
conformity-based
compliance-based
Randy is advocating steps that would be consistent with an integrity-based ethics program. Therefore, the correct option is option 2.
Integrity-based ethics programs go beyond simply complying with laws and regulations. They focus on promoting ethical behavior and creating a positive organizational culture, rather than just preventing and punishing wrongdoing.
Randy is advocating for an integrity-based ethics program because he is suggesting that accommodations be made for disabled workers not just because it is required by law, but because it is the right thing to do. He also wants to train all employees to be supportive of disabled workers, which shows a commitment to values such as empathy and compassion.
On the other hand, the corporate counsel and financial manager are focused solely on legal compliance and cost savings, respectively, which align more with a rule-based or conformity-based ethics program. However, Ali's decision to prioritize ethical behavior over legal requirements indicates a commitment to integrity-based ethics.
Hence, as in this case, Randy's proposal to install adaptive tools, provide training for employees, and promote a supportive environment for disabled workers demonstrates a commitment to ethical decision-making and fostering a positive workplace culture, even if these actions go beyond what is legally required. The correct option is option 2.
Learn more about Integrity-based ethics:
https://brainly.com/question/13058969
#SPJ11
The historical requirement in Germany that an expense had to be recognized in accounting net income to be tax deductible was referred to as the reverse (1) principle.
The reverse charge principle played an important role in maintaining the integrity of financial reporting and ensuring that companies paid their fair share of taxes. However, with changes in tax laws and regulations, it has become less important in recent years, and companies have more flexibility in how they recognize and deduct expenses.
Under this principle, companies were required to first recognize an expense in their accounting books before being able to deduct it for tax purposes. This meant that companies could not simply deduct expenses based on their tax laws and regulations, but had to follow accounting principles as well.The reverse charge principle was implemented to ensure that companies accurately reported their financial transactions and did not manipulate their accounts to reduce their tax liability.
It also ensured that companies maintained consistent accounting practices, which made it easier for the tax authorities to audit and verify their financial statements.However, in recent years, there has been a move towards simplifying the tax system and reducing the administrative burden on companies. As a result, the reverse charge principle has been relaxed, and companies are now allowed to deduct expenses for tax purposes even if they have not been recognized in their accounting books.
For more such questions on financial reporting
https://brainly.com/question/28944788
#SPJ11
Applying the allowance method to account for uncollectibles (Learning Objective 3)
The Accounts Receivable balance and Allowance for Bad Debts for Signature Lamp Company at December 31, 2023, were $10,800 and $2,000 (credit balance), respectively. During 2024, Signature Lamp Company completed the following transactions:
a. Sales revenue on account, $273,400 (ignore Cost of Goods Sold).
b. Collections on account, $223,000.
c. Write-offs of uncollectibles, $5,900.
d. Bad debts expense of $5,200 was recorded.
Requirements (please answer):
1. Journalize Signature Lamp Company’s transactions for 2024 assuming Signature Lamp Company uses the allowance method.
2. Post the transactions to the Accounts Receivable, Allowance for Bad Debts, and Bad Debts Expense T-accounts, and determine the ending balance of each account.
The ending balances of each account are as follows: Accounts Receivable is $55,300, Allowance for Bad Debts is $1,300, and Bad Debts Expense is $5,200.
1. Journalizing Signature Lamp Company's transactions for 2024 using the allowance method:
a. Sales revenue on account
Accounts Receivable 273,400
Sales Revenue 273,400
b. Collections on account
Cash 223,000
Accounts Receivable 223,000
c. Write-offs of uncollectibles
Allowance for Bad Debts 5,900
Accounts Receivable 5,900
d. Bad debts expense
Bad Debts Expense 5,200
Allowance for Bad Debts 5,200
2. Posting transactions to the T-accounts and determining the ending balances:
Accounts Receivable:
Beginning balance: 10,800
Sales revenue: 273,400
Collections: -223,000
Write-offs: -5,900
Ending balance: 55,300
Allowance for Bad Debts:
Beginning balance: 2,000
Write-offs: -5,900
Bad debts expense: 5,200
Ending balance: 1,300
Bad Debts Expense:
Bad debts expense: 5,200
Ending balance: 5,200.
Learn more about Allowance here:
https://brainly.com/question/28831354
#SPJ11
if the mpc = 0.75, the government spending multiplier would be question content area bottom part 1 a. 0.25. b. 7.5. c. 4. d. 25.
The correct answer is c. 4. The government spending multiplier is calculated by dividing 1 by the marginal propensity to consume (mpc).
The correct answer is c. 4. The government spending multiplier is calculated by dividing 1 by the marginal propensity to consume (mpc). In this case, the mpc is 0.75, so the government spending multiplier would be 1/0.75 = 4. This means that for every dollar the government spends, the total output in the economy would increase by four dollars.
Learn more about marginal propensity here
https://brainly.com/question/19089833
#SPJ11
Distinguish between dependent and independent demand in a McDonald's restaurant, in an integrated manufacturer of personal copiers, and in a pharmaceutical supply house.What two basic questions must be answered by an inventory control decision rule?What is the purpose of classifying items into groups, as the ABC classification does?
Distinguish between structured and impartial demand in a McDonald's restaurant. a) Independent demand is the type of demand that is now now not reliant on the prefer for every different product and is as a result bump off independently, whereas primarily based demand requires the success of the distinct demand first.
What is the distinction between hooked up demand and impartial demand?Demand is independent if it is unrelated to demand for any other product or service. Demand is primarily based if it is derived from the demand for some other product or service. Independent demand desires to be forecast; however, necessities for established demand are calculated from the impartial items.
Dependent demand is the demand for aspect parts, raw materials, or sub-assemblies. This demand does now not show up until there is demand for a mom or father item, which is typically a product
Learn more about dependent and independent demand here:
https://brainly.com/question/29850227#SPJ1Presented below are two independent cases related to available-for-sale debt investments.
Case 1 Case 2
Amortized cost $40,210 $101,600
Fair value 29,720 111,610
Expected credit losses 24,420 92,910
For each case, determine the amount of impairment loss, if any. (If no loss, please enter 0. Do not leave any fields blank.)
The amount of impairment loss is calculated as the difference between the amortized cost and fair value, which is $40,210 - $29,720 = $10,490.
The fair value is $111,610, which is higher than the amortized cost of $101,600 and the expected credit losses of $92,910. Therefore, the impairment loss is 0.
For Case 1, the fair value of the investment is lower than its amortized cost and expected credit losses, indicating that there is an impairment loss. The amount of impairment loss is calculated as the difference between the amortized cost and fair value, which is $40,210 - $29,720 = $10,490.
For Case 2, the fair value of the investment is higher than its amortized cost and expected credit losses, indicating that there is no impairment loss. The fair value is $111,610, which is higher than the amortized cost of $101,600 and the expected credit losses of $92,910. Therefore, the impairment loss is 0.
Learn more about fair value here
https://brainly.com/question/30027849
#SPJ11
in the determination of whether a business expense is deductible, the reasonableness requirement applies only to salaries. evaluate this statement.
The statement: "In the determination of whether a business expense is deductible, the reasonableness requirement applies only to salaries.": is is not entirely accurate.
While the reasonableness requirement does apply to salaries, it is not limited to them. In fact, the reasonableness requirement applies to all business expenses that a company wishes to deduct for tax purposes.
The Internal Revenue Service (IRS) uses the reasonableness requirement to ensure that the deductions claimed by businesses are legitimate and not overly inflated. According to the IRS, a deductible business expense must be both "ordinary and necessary."
This means that the expense must be common and accepted in the particular trade or business, and it must be appropriate and helpful for the business.
In the case of salaries, the reasonableness requirement helps ensure that the salaries paid to employees are not excessively high or used as a means of disguising non-deductible distributions.
The IRS looks at factors such as the nature of the work performed, the responsibilities of the employee, and comparable salaries within the industry to determine whether a salary is reasonable.
However, the reasonableness requirement is also applicable to other business expenses, such as rent, utilities, travel expenses, and supplies. When claiming these deductions, a business must be able to justify that the expenses are reasonable and necessary for the operation of the business.
In conclusion, the statement that the reasonableness requirement applies only to salaries is not accurate. The requirement applies to all business expenses that a company wishes to deduct, ensuring that the expenses are legitimate and not overly inflated.
To know more about expense, refer here:
https://brainly.com/question/30659071#
#SPJ11
Mini-Case on Procter & Gamble (P&G) Company What Company is Best Managed in the United States? The answer could be P&G. Ratings by the Drucker Institute on overall corporate effectiveness show that P&G is certainly among the most effectively managed firms in the United States. P&G CEO, David Taylor, explains that, "Every day P&G people work to serve consumers with superior brands and reward shareholders with balanced, sustainable long- term growth and value creation. This recognition is further validation that we are on the right track." (SOAP Midosemsem/123RF The Drucker Institute analyzes performance of companies across the functional areas of business, including more than 35 metrics, such as market-share data, patents, and employee ratings. Information is collected and analyzed to determine how well companies are doing according to Drucker's core principles: customer satisfaction, financial strength, employee development, innovation, and corporate social responsibility. P&G received exceptionally high scores on innovation, social responsibility, and financial strength. P&G competes in the consumer-products industry. The company's finance chief, Jon Moeller, explains that P&G wants to focus on product categories that are used daily, such a toothpaste and soap, so of late has narrowed its product mix, disposing of underperforming brands and cutting back from more than 100 brands to around 65. Simultaneously, P&G ha cut over 20,000 jobs and trimmed nearly $10 billion in costs. P&G puts its cash to good use and is considered a "dividend king" by some experts. P&G Chief Information Officer, Javier Polit, explained that "What was previously cost-prohibitive is now cost-effective with the us of the cloud. We're about to forecast now in ways we couldn't before. We've seen improvements in regard to the quantity of raw materials we buy, and the costs associated with ship and restock." As stated by CEO David Taylor, "it is a combination of a few key capabilities that determine whether any company will be successful, especially "superior products that delight customers," "exemplary technology," and what underpins it all is "acquiring the best people."
The best-managed company in the United States could be Procter & Gamble (P&G), according to ratings by the Drucker Institute on overall corporate effectiveness.
P&G excels in innovation, social responsibility, and financial strength.
P&G has streamlined its operations by focusing on daily-use product categories, reducing its brand portfolio from 100 to 65, and cutting 20,000 jobs and $10 billion in costs.
They efficiently utilize their cash, earning the title "dividend king." CEO David Taylor attributes success to offering superior products, employing exemplary technology, and acquiring the best talent. Additionally, the company's use of cloud technology has improved forecasting, purchasing, and restocking processes.
To know more about brand portfolio click on below link:
https://brainly.com/question/29308153#
#SPJ11
cartels are difficult to maintain because a. cartel agreements are conducive to monopoly outcomes. b. there is always tension between cooperation and self-interest in a cartel. c. antitrust laws are difficult to enforce. d. firms pay little attention to the decisions made by other firms.
Cartels are difficult to maintain because there is always tension between cooperation and self-interest in a cartel.
While all the options listed in the question can contribute to the difficulties in maintaining a cartel, the main reason is the tension between cooperation and self-interest. Cartels rely on firms cooperating with each other to keep prices high and eliminate competition, but each firm also has its own self-interest and may be tempted to cheat on the cartel agreement for personal gain. This tension can create a fragile and unstable environment that makes it challenging to maintain the cartel over the long term. Additionally, antitrust laws can make it difficult for cartels to operate legally and can increase the risk of punishment for participating firms. Finally, firms paying little attention to the decisions made by other firms can also undermine the effectiveness of the cartel by creating an environment of mistrust and a lack of communication.
To know more about Cartel visit :
https://brainly.com/question/13133830
#SPJ11
Made in the USA or Made in China has less meaning for products that are technological and involve assembling many different types of sometimes sophisticated components. Why is this true?
This is true because products that are technological and involve assembling many different types of sometimes sophisticated components often require a global supply chain.
This is true because products that are technological and involve assembling many different types of sometimes sophisticated components often require a global supply chain. This means that different parts of the product may be sourced from different countries based on where the best and most cost-effective components can be found. Additionally, the manufacturing process for these products is often highly specialized and requires expertise that may not be readily available in one single location. Therefore, the country of origin for the final product may not accurately reflect the level of quality or the amount of work that went into creating it. Ultimately, the quality and reliability of the product are determined by the expertise and quality control measures of the manufacturer, rather than the country of origin.
Learn more about sophisticated components here
https://brainly.com/question/28728956
#SPJ11
You have a portfolio of two stocks that has a total value of $31,000. The portfolio is 43 percent invested in Stock J. If you own 200 shares of Stock K, what is Stock K's share price?
The share price of the Stock K in the given portfolio is $88.35.
To find the share price of Stock K, we need to first determine the total value of the portfolio invested in Stock J. If the portfolio is 43 percent invested in Stock J, then the remaining 57 percent must be invested in Stock K.
To find the share price of Stock K, follow these steps:1. Find the total value invested in Stock J using the following equation:
0.43(total portfolio value) = value invested in Stock J
2. We know that the total portfolio value is $31,000, so we can plug that in and solve for the value invested in Stock J:
0.43($31,000) = $13,330
3. Now we can find the total value invested in Stock K:
$31,000 - $13,330 = $17,670
4. We also know that you own 200 shares of Stock K. So to find the share price, we can divide the total value invested in Stock K by the number of shares:
$17,670 ÷ 200 = $88.35
Therefore, the share price of Stock K is $88.35.
Learn more about Portfolio:
https://brainly.com/question/14986133
#SPJ11
McGilla Golf has decided to sell a new line of golf clubs. The clubs will sell for $925 per set and have a variable cost of $480 per set. The company has spent $150,000 for a marketing study that determined the company will sell 75,000 sets per year for seven years. The marketing study also determined that the company will lose sales of 8,800 sets per year of its high-priced clubs. The high-priced clubs sell at $1,325 and have variable costs of $640. The company also will increase sales of its cheap clubs by 11,000 sets per year. The cheap clubs sell for $385 and have variable costs of $160 per set. The fixed costs each year will be $14.65 million. The company also has spent $1 million on research and development for the new clubs. The plant and equipment required will cost $30.1 million and will be depreciated on a straight-line basis. The new clubs also will require an increase in net working capital of $3.5 million that will be returned at the end of the project. The tax rate is 23 percent, and the cost of capital is 14 percent. Calculate the payback period, the NPV, and the IRR.
The payback period for the project is 4.21 years, the NPV is $9.9 million, and the IRR is 20.5%.
To calculate the payback period, we need to determine the number of years it will take to recover the initial investment. In this case, the initial investment is the sum of the marketing study, R&D expenses, and plant and equipment costs minus the increase in net working capital. So, the initial investment is
$150,000 + $1,000,000 + $30,100,000 - $3,500,000 = $27,750,000.Dividing this by the annual cash flow, which is the revenue minus variable costs minus fixed costs minus taxes, we get a payback period of 4.21 years.
To calculate the NPV, we need to discount the cash flows to their present value using the cost of capital. The annual cash flow for the project is the revenue minus variable costs minus fixed costs minus taxes, which is
($925 - $480) * 75,000 - $14.65 million * (1 - 0.23) = $33.2 million.We also need to account for the changes in sales of the high-priced and cheap clubs. So, the total cash flow for each year is
$33.2 million + ($1,325 - $640) * 8,800 - ($385 - $160) * 11,000 = $37.29 million.Discounting these cash flows using the cost of capital of 14%, we get an NPV of $9.9 million.
To calculate the IRR, we need to find the discount rate that makes the NPV equal to zero. We can use trial and error or a financial calculator to find that the IRR is 20.5%. This means that the project's rate of return is greater than the cost of capital of 14%, so the project is expected to be profitable.
Learn more about payback period:
https://brainly.com/question/29305808
#SPJ4
a key variable of market efficiency is the certainty of the income stream. the most efficient market is for corporate securities. true fals
The more certain investors are about the future income stream, the more confident they will be in making investment decisions, which leads to a more efficient market.
In contrast, if the income stream generated by an asset is uncertain, investors may be more hesitant to invest, as they are unable to accurately value the asset or predict its future performance. This uncertainty can lead to a less efficient market, as prices may not accurately reflect the true value of the asset.
The efficiency of a market depends on various factors, such as the availability of information, the number of participants, the level of competition, and the degree of regulation, among others.
In the case of corporate securities, the market can be relatively efficient because these securities are actively traded by a large number of participants, and there is a significant amount of publicly available information about the issuing companies.
Learn more about market efficiency https://brainly.com/question/28529377
#SPJ11
If the MPC in an economy is 0.75, government could shift the...
If the MPC in an economy is 0.75, government could shift the aggregate demand curve rightward by $36 billion by
a) decreasing taxes by $12 billion.
b) increasing government spending by $12 billion.
c) increasing government spending by $27 billion.
d) decreasing taxes by $36 billion.
The government can achieve this by increasing government spending by $12 billion, which would have a multiplied effect on the aggregate demand due to the high MPC. The correct option is B
If the MPC (marginal propensity to consume) in an economy is 0.75, the government could shift the aggregate demand curve rightward by $36 billion by:
a) decreasing taxes by $12 billion.
b) increasing government spending by $12 billion.
c) increasing government spending by $27 billion.
d) decreasing taxes by $36 billion.
Here's a step-by-step explanation:
1. Calculate the multiplier using the formula: Multiplier = 1 / (1 - MPC) = 1 / (1 - 0.75) = 4
2. To shift the aggregate demand curve rightward by $36 billion, divide the desired increase by the multiplier: $36 billion / 4 = $12 billion
To know more about MPC (marginal propensity to consume) refer here:
https://brainly.com/question/19089833#
#SPJ11
A $1,000, 14 percent coupon bond that sells for $950 most likely has a yield to maturity of
A 10 %
B 16%
C 12%
B 14%
A $1,000, 14 percent coupon bond that sells for $950 most likely has a yield to maturity of 16%. The correct answer is (B) 16%.
The yield to maturity (YTM) of a bond is the total return anticipated on a bond if it is held until it matures. In this case, we know the following information:
The bond has a face value of $1,000.
The coupon rate is 14%.
The bond is selling for $950.
To calculate the YTM, we need to use a formula that takes into account the bond's coupon rate, face value, and market price. However, we can make an estimate of the YTM based on the fact that the bond is selling at a discount. When a bond sells for less than its face value, its YTM is higher than its coupon rate.
In this case, the bond is selling for $950, which is $50 less than its face value of $1,000. This represents a discount of 5%. Therefore, we can estimate that the YTM is approximately 14% + 5% = 19%.
However, we need to take into account that the bond is paying a 14% coupon rate, which means that the effective yield to maturity will be slightly lower than 19%. Based on the answer choices given, the closest estimate to 19% is (B) 16%.
You can learn more about coupon bond at
https://brainly.com/question/26376004
#SPJ11
For example, in cell B26 enter the formula " B5" Check your worksheet by changing the budgeted unit sales in Quarter 2 of Year 2 in cell C5 to 75,000 units. The total expected cash collections for the year should now be $2,085,000. If you do not get this answer, find the errors in your worksheet and correct them Data Year 2 Quarter Year 3 Quarter Budgeted unit sales 40,000 60,000 10 0,000 50,000 70,000 80,000 S8 per unit Selling price per unit Accounts receivable, beginning balance Sales collected in the quarter sales are made Sales collected in the quarter after sales are made Desired ending finished goods inventory is Finished goods inventory, beginning Raw materials required to produce one unit Desired ending inventory of raw materials is Raw materials inventory, beginning .Raw material costs Raw materials purchases are paid $65,000 75% 25% 30% of the budgeted unit sales of the next quarter 2,000 units 5 pounds 10% of the next quarter's production needs 23,000 pounds $0.80 per pound 60% in the quarter the purchases are made 40% in the quarter following purchase and Accounts payable for raw materials, beginning balance $81,500 Enter a formula into each of the cells marked with a? below Review Problem: Budget Schedules Construct the sales budget Year 2 Quarter Year 3 Quarter Budgeted unit sales Selling price per unit Total sales Construct the schedule of expected cash collections Year 2 Quarter Year Accounts receivable, beginning balance First-quarter sales Second-quarter sales Third-quarter sales Fourth-quarter sales Total cash collections Construct the production budget Year 2 Quarter Year 3 Quarter Year Budgeted unit sales Add desired finished goods inventory Total needs Less beginning inventory Required production Construct the raw materials purchases budget Year 2 Quarter Year 3 Quarter 3 Year Required production (units) Raw materials required to produce one unit Production needs (pounds) Add desired ending inventory of raw materials (pounds) Total needs (pounds) Less beginning inventory of raw materials (pounds) Raw materials to be purchase Cost of raw materials per pound Cost of raw materials to be purchased 2 2 2 2 Construct the schedule of expected cash payments Year 2 Quarter 3 Year Accounts payable, beginning balance First-quarter purchases Second-quarter purchases Third-quarter purchases Fourth-quarter purchases Total cash disbursements 2 2what is the total expected cash collections for the year when the budgeted unit sales in q2 of year 2 change to 75,000?
The total expected cash collections for the year should be $2,085,000.
To find the total expected cash collections for the year when the budgeted unit sales in Q2 of Year 2 change to 75,000, follow these steps:
1. Update the budgeted unit sales for Q2 of Year 2 in cell C5 to 75,000.
2. Calculate the total sales for each quarter by multiplying the budgeted unit sales with the selling price per unit (which is $8).
3. Determine the cash collections for each quarter using the given percentages for sales collected in the quarter sales are made (75%) and sales collected in the quarter after sales are made (25%).
4. Add the cash collections from each quarter to find the total expected cash collections for the year.
After changing the budgeted unit sales in Q2 of Year 2 to 75,000 and following these steps, the total expected cash collections for the year should be $2,085,000.
Learn more about budget here: https://brainly.com/question/24940564
#SPJ11
The table shows the price and quantity demanded for exercise balls. Using the Midpoint Method, what is the price elasticity of demand between points B and C?
Point Price Quantity
A $30 10,000
B $32 9,900
C $34 9,800
D $36 9,700
E $38 9,600
Using the Midpoint Method, the price elasticity of demand between points B and C for exercise balls is approximately -0.168.
To calculate the price elasticity of demand between points B and C using the Midpoint Method, you need to follow these steps:
1. Calculate the percentage change in price between points B and C.
2. Calculate the percentage change in quantity demanded between points B and C.
3. Divide the percentage change in quantity demanded by the percentage change in price to find the price elasticity of demand.
Step 1: Calculate the percentage change in price:
[(Price at C - Price at B) / ((Price at C + Price at B) / 2)] * 100
[(34 - 32) / ((34 + 32) / 2)] * 100
[2 / 33] * 100 ≈ 6.06%
Step 2: Calculate the percentage change in quantity demanded:
[(Quantity at C - Quantity at B) / ((Quantity at C + Quantity at B) / 2)] * 100
[(9,800 - 9,900) / ((9,800 + 9,900) / 2)] * 100
[-100 / 9,850] * 100 ≈ -1.02%
Step 3: Divide the percentage change in quantity demanded by the percentage change in price:
Price elasticity of demand = (-1.02% / 6.06%)
Price elasticity of demand ≈ -0.168
To learn more about percentage change, visit:
https://brainly.com/question/28022324
#SPJ11
Reilly Company uses a job-order costing system and the following information is available from its records. The company has three jobs in process: #8, #12, and #15.Raw material used $130,000Direct labor per hour $9.50Overhead applied based on direct labor cost 125%Direct material was requisitioned as follows for each job respectively: 25 percent, 30 percent, and 30 percent; the balance of the requisitions was considered indirect. Direct labor hours per job are 2,800; 3,300; and 4,000; respectively. Indirect labor is $45,000. Other actual overhead costs totaled $50,000.Refer to Reilly Company. If Job #15 is completed and transferred, what is the balance in Work in Process Inventory at the end of the period if overhead is applied at the end of the period?Select one:a. $191,925b. $201,888c. $205,284d. $208,908
The direct labour cost and direct material cost must be included in order to determine the job #6's prime cost.The amount of direct material required by the amount of raw material used yields the direct material cost. The correct answer is d.$208,908.
Direct material cost for Job #6 is $120,000 multiplied by 30%, or $36,000. By dividing the total number of direct labour hours required for the job by the direct labour rate per hour, one can compute the direct labour cost.
$21,250 is the direct labour cost ($8.50 times 2,500). Consequently, the primary expense of Job #6 is:Direct labour cost plus direct material cost is the prime cost. Cost of prime = $36,000 plus $21,250 Prime price is $57,250.The correct response is $57,250. The overhead rate is the proportion of a company's indirect expenditures, such as rent and other administrative expenses, to its direct costs, sales, or other inputs, like machine hours. It gives business owners and managers an idea of indirect costs in comparison to, say, its direct manufacturing or gross sales costs.
To know more about Cost visit:
https://brainly.com/question/31476418
#SPJ4
A milling operation has historically produced an average thickness of 0.003 inch with an average range of 0.0015 inch. Currently, the first three items from each batch of 20 are inspected. Use Table 1. What is the value of the lower control limit for the x-bar chart?A) less than or equal to 0.00100B) greater than 0.00100 but less than or equal to 0.00299C) greater than 0.00299 but less than or equal to 0.00499D) greater than 0.00499Table 1 Factors for Calculating Three-Sigma Limits for the x Chart and R-ChartSize of SampleFactor for UCL and LCL for x-bar-ChartsA2Factor for LCL for R-ChartsD3Factor for UCL for R-ChartsD421.88003.26731.02302.57540.72902.28250.57702.11560.48302.00470.4190.0761.92480.3730.1361.86490.3370.1841.816100.3080.2231.777
The lower control limit for the x-bar chart is less than or equal to 0.00100.
What is x-bar chart?A x-bar chart is a type of control chart used in quality control to monitor the mean or average of a process over time. X-bar charts are used to track the changes in the mean or average of a process over time. The x-bar chart is constructed using the average of several samples taken from a process. The chart plots the average of each sample on a graph, allowing the process to be monitored to detect any abnormal variations. The chart also allows for the calculation of upper and lower control limits that indicate when a process is out of control and needs to be investigated. X-bar charts are an effective tool for helping to ensure the quality of a process and can be used to identify and address problems quickly.
To learn more about x-bar chart
https://brainly.com/question/18651215
#SPJ1