the boiling point of liquid nitrogen is 77.0 k. what is the corresponding temperature in the fahrenheit and celsius scales?

Answer:

MgS thus, magnesium sulphide

In accordance with the stated assertion, 1 mol of Cacl₂will dissolve in the solution.

Chemists employ the mole, a highly significant unit of measurement. Like a dozen eggs implies twelve eggs, having a mole of anything indicates we had 602,214,076,000,000,000,000,000 of that item. For extremely tiny objects as electrons, polymers, or other particles, chemists must quantify using moles. A mole is defined as the mass of a material with the same numbers of elementary particles that are atoms in exactly 12.000 g of 12C.

You are aware that 1L of solution contains 2 moles of Cacl₂.

In 0.500 L of solution there are

0.500 L soln. * 2.0 mol of Cacl₂/1 L soln = 1 mol Cacl₂

To know more about Moles visit:

https://brainly.com/question/26416088

#SPJ4

The differential between freezes point of the pure reagent and or the melting point of the solution is referred to as the depression in the freezing point.

How do melting and freezing points differ?

Definition. The temperature at which a liquid turns into a solid under normal air pressure is known as the freezing point. A melting point, on the other hand, is the temperature at which a solid turns into a liquid at ordinary atmospheric pressure.

Is the freezing point precisely 32 degrees?

Water frozen at 32 degrees Fahrenheit, 0 degrees Celsius, and 273.15 Kelvin, as we have all known. But this isn't always the case. After discovering water vapour at -40 degrees Centigrade inside clouds, scientists have even chilled water as in lab to -42 degrees C.

Briefing:

0.8 - (freezing point of solution)=4×7.82×81.1×1000/162.2×850

                                                 = 0.8-18.4

 freezing point of solution      = -17.6°C

To know more about freezing point visit:

https://brainly.com/question/1550397

#SPJ4

The reaction is exergonic. that is the free energy change delta G for a reaction is -46.11 kJ/mol, the reaction is exergonic.

Chemical thermodynamics, exergonic reactions are chemical reactions in which the change in free energy is negative (there is a net release of free energy).

This shows the spontaneous reaction when the system is closed and the initial and final temperatures are the same.

Reactions can be endergonic or exergonic. Endergonic reactions require heat or energy input. The exergonic reaction is the opposite. it gives off heat. Answer and Explanation:

Reactions with negative values of G are exergonic, meaning they release heat.

Read more about endothermic.;

https://brainly.com/question/15539215

#SPJ4

a) Solute weight in grams: (25*7.5)/100 = 1.875 gm.

b) Because the weight of a solution is equal to the sum of the weights of the solute and solvent,

Solution weight is 100 grams.

Solvent weight in grams: 100 - 1.875 = 98.125 gm.

Given that water has a density of 1 g/ml, the formula to determine how much solute to add to a solution in weight percent is as follows: grams of solute = (wt% solution) x (ml of water) (100 - wt% solution). The ratio of a solute—a material that dissolves—to a solvent—a substance that does not dissolve—determines the concentration of a solution in chemistry. C = m/V, where C is the concentration, m is the mass of the solute dissolved, and V is the overall volume of the solution, is the accepted formula.

learn more about Solution here:

https://brainly.com/question/1416865

#SPJ4

lessen the solute content slow down the rate of dissolution.

By dissolving the solute in the solvent, a solution is created. Dissolution is the process through which solutes that have been dissolved into a solvent form a solution. A solution of the gas, liquid, or solid in the original solvent is created during this procedure.

Solution stirring: Solution stirring results in a greater interaction between the solvent and the solute, speeding up the rate of dissolution.

The solute's surface area is: It is easier for the solute to interact with the solvent when the solute has a lower surface area. Therefore, the rate of disintegration increases with decreasing surface area.

Temperature of the Solvent Because the solvent's molecules have more energy at higher temperatures, more substances often dissolve in it, which increases the amount of molecular interaction between the solvent's and solute's molecules.

Because there is less solute in the solution, there will be less contact between the solute and the solvent, which will result in a slower rate of dissolution (even though a solution will still be formed).

To learn more about dissolution https://brainly.com/question/16818744

#SPJ4

Because AgCl is insoluble in water. But Cu2Cl2, MgCl2 are soluble in water.

Silver chloride, AgCl, is a white crystalline solid with a poor water solubility. AgCl occurs naturally as the mineral chlorargyrite. When exposed to sunshine or heat, silver chloride oxidises to silver and chlorine.

AgCl has various disinfecting and antiseptic qualities and is also used to treat mercury toxicity. This substance is used in antimicrobials, wound healing products, personal deodorants, water treatment, and antidotes.

Ingestion, inhalation, and skin contact are all harmful. Prolonged exposure can cause argyria, a blue discoloration of the skin. Irritating to the eyes and skin. Dangerous to the environment.

Light sensitive compounds include silver chloride. They may also respond to light extremely quickly and lose their characteristics. As a result, they must be stored in dark bottles to prevent light from entering.

To learn more about silver chloride, here

https://brainly.com/question/12912140

#SPJ4

2.17x10^-33kj/mol of energy is damaged by the photons which are caused by the light.

The Energy of Proton:

The energy of a photon has a direct relationship with the frequency of the photon. It can be defined as the energy a single photon carries.

The amount of energy is directly proportional to the photon's electromagnetic frequency and thus, equivalently, is inversely proportional to the wavelength.

Given that:

The light lies between 445nm and 470nm. so the value of c is 15nm

wavelength=4577.5nm

If the photon's wavelength is known, the photon's energy can be calculated using the formula :

[tex]E=\frac{h c}{wavelength}[/tex]

h is Planck's constant,h=6.626x10^-34  c is the speed of light and the wavelength of the radiation are all represented in the equation.

Now substitute the values in the formula,

[tex]E=\frac{ 6.626*10^-34*15}{457.5}[/tex]

E=2.17x10^-33kj/mol

To know more About the Energy of protons:

https://brainly.com/question/13088059

#SPJ4

Three more trials were conducted and the data was recorded this is one of sentence appropriate for a formal lab report in chm113 lab.

The phrase "three further trials were undertaken and the data was recorded" is appropriate for a formal lab report in the CHM113 lab. Following the recording of these samples' absorbencies, a standard line curve with the concentration equation and an R2 value was produced using the data. To make it simpler to grasp huge amounts of data and the relationships between various series of data, series of numeric data are displayed in a graphical fashion using charts.

to know more about lab report please visit.

https://brainly.com/question/27639548

#SPJ4

5 gram of nitrogen  P1=3 atm  T=293k    V2=3V1, a) gas volume after the expansion is 4.29L. , b) the gas temperature after the expansion is 606 degree celcius, c) the gas pressure after the decrease is 1 atm, d) final gas pressure is 3 atm.

calculations are a-p1*v1=nRT1= 3*V1 = (5/28) *(0.0821)*293 V1=1.431L so V2 =3V1=3*1.43=4.29L. B- V1/T1=V2/T2=T2=V2/V2 *T1,T2=3*293=879K=606 degree celcius. )P1/T1=P2/T2=3/879 = P2/293= P2=1 atm . d-P1V1=P2V2=  1*4.29=P2*1.43 SO p2=3 atm.The quantity of a system is an essential extensive measurement for describing its thermodynamic state in thermodynamics. gas volume The specific volume, an intensive property, is the volume of the system per unit of mass. The pressure acts perpendicular to the wall (normal); the tangential (shear) component of the force is proportional to the viscosity of the gas. When gas molecules collide with the walls, they produce a force that is perpendicular to the walls. The Gas Pressure is defined as the sum of all such forces divided by the surface area of the container walls. The average linear momentum of the gas molecules is measured by the gas pressure.

Learn more about gas volume here:

https://brainly.com/question/15265703

#SPJ4

A solution of 9% (by weight) ethylene glycol (62 g/mol) in water at 25 °C has a vapor pressure of 23.1 torr.

Raoult's Law.

Consider a 100 g solution.

Ethylene glycol mass is 9 g

water mass is 100 g - 9 g = 91 g moles.

Ethylene glycol = 9 g times 1 mole/62 g =0.1451 moles.

moles water = 9 g x 1 mole/18 g = 5.0555 moles water

Total moles are equal to 0.1451 + 5.0555 = 5.2006 moles

the mole percentage of water = 5.0555 moles/5.2006 moles  = 0.9720

Vapor pressure is equal to the mole percentage of water times the pure water vapor pressure (0.9720)(23.8 torr) = 23.1359 torr.

To know more about vapor pressure please click on the link brainly.com/question/11864750

#SPJ4

The formal charge on sulfur in so42- is 0, where the Lewis structure of the ion is attached in the image below.

Formal charge = # of valence electrons -(number of bond pairs)/2 - number of lone pair electrons

So, formal charge on S = 6-(12/2)-0 = 0

Valence electrons are the electrons withinside the outermost shell, or power level, of an atom. For example, oxygen has six valence electrons,  withinside the 2s subshell and 4 withinside the 2p subshell.

Sulfate ion is a very weak base, while HSO−4 is a fairly strong acid, with Ka=0.01. On the other hand, H2SO4 is a very strong acid. Because it is such a weak base, sulfate ion undergoes negligible hydrolysis in aqueous solution.

To learn more about formal charge check the link below:

https://brainly.com/question/28446255

#SPJ4

The summary clearly and precisely with accuracy highlights important facts about how chemical compounds form and other characteristics.

Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.

Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.They are:

1)Molecular compounds where in atoms are joined by covalent bonds.

2) ionic compounds where atoms are joined by ionic bond.

3)Inter-metallic compounds where atoms are held by metallic bonds

4) co-ordination complexes where atoms are held by co-ordinate bonds.

Learn more about compounds,here:

https://brainly.com/question/14658388

#SPJ1

390 seconds are required for the conversion of benzoyl chloride to benzoic acid.

Benzoyl chloride is also known as benzene carbonyl chloride. Benzoyl chloride has the chemical formula C7H5ClO. It is a colourless liquid with a boiling point of 198° and a strong odour in moist air.

It has a strong odour and causes excessive watering of the eyes and nose. It is practically insoluble in water.

Benzoyl chloride is used for the following purposes:

Learn more about Benzoyl chloride

https://brainly.com/question/13017370

#SPJ4

If ethanol is a fuel option, the bond energies ΔHrxn are -1250 kJ/mol for ethanol combustion.

Over a billion individuals drink ethanol (also known as ethyl alcohol) nearly everyday. Yeast, sugars, plus starches are processed to create this kind of alcohol. People have been drinking ethanol-based beverages like beer and wine for generations to alter their mood.

CH3CH2OH(g) + 3 O2(g) → 2 CO2(g) + 3 H2O

There are 5 C-H bonds, 1 C-O single bond, 1 O-H bond and, 3 O=O bonds and 1 C-C bond in reactants.

6 O-H bonds and 4 C=O bonds in products.

ΔHrxn = energy required to break reactant bonds - energy required to break product bonds.

ΔHrxn = [(5*411)+(1*358)+(1*459)+(3*494)+(1*346)]−[(6*459)+(4*799)]

ΔHrxn = 4700−5950

= -1250 kJ/mol

To know more about Ethanol visit:

https://brainly.com/question/25002448

#SPJ4

Answer:

Single replacement

Explanation: Al is replacing Cu

The fluorine - nuclide radioactively decays by electron capture. (9+1)18F -> (8)18O + e^- + v_e is the balanced nuclear chemical equation that describes this process.

Radioactive decay is a process in which an unstable nucleus emits particles or radiation in order to become more stable. Electron capture is a type of radioactive decay in which an inner atomic electron is captured by the nucleus, combining with a proton to form a neutron. This process results in the emission of an electron neutrino and a reduction in the atomic number of the nucleus by one.

To write a balanced nuclear chemical equation that describes the electron capture decay of a fluorine-nuclide, we can use the following general form:

(Z+1)A X -> (Z)A Y + e^- + v_e

where (Z+1)A X is the initial nuclide, (Z)A Y is the final nuclide, e^- is the captured electron, and v_e is the electron neutrino. The atomic number (Z) and mass number (A) of the nuclides are indicated in parentheses.

In this case, the initial nuclide is the fluorine-nuclide, which has an atomic number of 9 (Z+1) and a mass number of 18 (A). The final nuclide is an isotope of oxygen, which has an atomic number of 8 (Z) and the same mass number as the initial nuclide (A).

The balanced nuclear chemical equation for the electron capture decay of the fluorine-nuclide would be:

(9+1)18F -> (8)18O + e^- + v_e

It is important to note that this is a general equation for electron capture decay and does not represent the specific decay of any particular fluorine-nuclide. The actual decay of a specific nuclide may involve the emission of other particles or radiation in addition to the electron and electron neutrino.

To know more about electron capture please refer: https://brainly.com/question/17215285

#SPJ4

Energy is released (in kj) in the fusion reaction of 2h to yield 1 mol of 3he is  3.204 × 10⁸ kJ / mol.

Calculation:-

              2 ²₁ H -----> ³₂He + ¹₀n

mass     2.041            3.0160  1.008664

mass of product = 2 × 2.0141 = 4. 0282

mass of reactant = 3.0160 + 0.08664 = 4.02464

mass defect = mass of product - mass of reactant

                      = 4.0282 - 4. 2464

                      = 3.56 * 10⁻³ amu

                      = 3.56 * 10⁻³ amu × 1.66 × 10 ⁻²⁷ kg

                      = 5.9115 × 10⁻³⁰ kg

energy released  = mc²

            = 5.9115 × 10⁻³⁰ kg × (3 × 10⁸)²

            = 5.32 * 10 ⁻¹³ J

conversion:-

5.32 * 10 ⁻¹³ J * 6.022 × 10²³ / 1 mol × 1 kj/10³ j

    = 3.204 × 10⁸ kJ / mol

Learn more about energy released here:-https://brainly.com/question/27671072

#SPJ4

If the reaction occurs at 298K and 1 atmosphere of pressure, the work done by the CO₂ is -24.8 Joules.

Work is the energy required to move something against a force. The energy of a system can change due to work and other forms of energy transfer such as heat. Gases do expansion or compression work with the equation W = - P * ΔV.

From the question given

molarity of (NaHCO₃) = 0.1m

Volume of NaHCO₃ (V) = 100ml * 10⁻³ L / 1 ml = 0.1L

T (temperature) = 298k

P (pressure) = 1atm

moles of NaHCO₃

= molarity * Volume in Liters

= 0.1m * 0.1L = 0.01L

NaHCO₃ + HCl -> CO₂ + H₂O + NaCl

moles of CO₂ = moles of NaHCO₃ * (coefficient of CO₂ / Coefficient of NaHCO₃)

= 0.01L * 1/1

= 0.01 mol (moles of CO₂)

so, initial moles of CO₂ = 0

final moles of CO₂ = 0.01mol (based from the calculation)

Δn 0.01 - 0 = 0.01mol

Now, let's use work formula (as mentioned above on explanation part)

Work = - P * ΔV

= - Δn * R *T

Where R = 8.314J / mol.K

= - ( 0.01mol * 8.314 J / mol*K * 298K)

= -24.8J

Therefore, the work done by the CO₂ on this 100ml solution is -24.8Joules.

Learn more about work https://brainly.com/question/16687948

#SPJ4

• 2KOH(aqueous) + CaCl2(aqueous)—Ca(OH)2(aqueous) + 2KCl

• AgNO3(aqueous) + KCl(aqueous)—AgCl(precipitate) + KNO3(aqueous)

• NaCl and aqueous AgNO3 (aqueous) AgCl + NaNO3 in water;

Mg(OH)2 + 2HCl in water; MgCl2 (aqueous) + 2H2O(l)

How do you recognize a precipitation reaction in an equation?

Usually, only net ionic equations are used to describe precipitation reactions. A net ionic equation cannot be stated if all products are watery since all ions cancel each other out as spectator ions. As a result, there is no precipitation response.

An illustration of a precipitate equation

Precipitation reaction examples include adding 2 KI (aq.), 2 KNO3 (aq.), and PbI2 (s/ppt). Sodium chloride (NaCl) and insoluble barium sulfate are produced by the reaction of barium chloride (BaCl2) and sodium sulfate (Na2SO4) (BaSO4).

To know more about precipitation reaction visit;

https://brainly.com/question/29762381

#SPJ4

Difference between entropy and free energy:

The Gibbs equation allows us to predict reaction spontaneity directly from enthalpy and entropy measurements. When a reaction is exothermic, the system’s enthalpy is negative, resulting in a negative Gibbs free energy. As a result, all exothermic reactions are considered spontaneous.

What do you mean by exothermic reaction?

A reaction that is chemical in nature and is characterized by the release of energy in the form of heat or light is called an exothermic reaction. Matching a light using a matchstick is one example of this type of reaction where the release is in the form of both heat and light.

The energy dissipated in an exothermic reaction is transferred into the surroundings. Therefore, the change in enthalpy (a quantity that measures the heat content of a system by calculating the change in energy) is negative in such a reaction.

To know more about exothermic reaction from the given link:

https://brainly.com/question/24808802

#SPJ4

The difference between entropy and free energy is that entropy is a measure of disorder or randomness of a system, while free energy is the measure of how much energy is available to do work in a system.

What is entropy?

Entropy is a measure of the amount of disorder in a system. It can be used to describe the uncertainty of a system and its ability to exchange energy. Entropy is a thermodynamic property that can be used to determine the state of a system and its ability to exchange energy with its environment. The entropy of a system increases as the amount of disorder increases. Entropy is related to the number of possible arrangements of the particles in the system and the number of ways they can be arranged. Entropy also relates to the amount of energy that can be exchanged between the system and its environment. Entropy can be used to measure the efficiency of a process or system, as well as the amount of energy needed to maintain it.

Entropy is a measure of how much energy is spread out or available to do work in a system. Therefore, a higher entropy means that the energy is spread out more, while a lower entropy means that the energy is more concentrated. Entropy also affects the spontaneity of a reaction, with higher entropy meaning that the reaction is more likely to be spontaneous and proceed in a certain direction.

Free energy, on the other hand, is a measure of how much energy is available to do work in a system. It is calculated by subtracting the enthalpy from the entropy of a reaction, and it is an important factor in determining the spontaneity and direction of a reaction. If the free energy of a reaction is negative, then the reaction is spontaneous and will proceed in the direction of the negative free energy. If the free energy of a reaction is positive, then the reaction is not spontaneous and will not proceed in the direction of the positive free energy.

To learn more about entropy
https://brainly.com/question/419265
#SPJ4

Here the correct conjugate acid-base pair will be: [tex]\mathrm{HSO}_3^{-} \:and\: \mathrm{SO}_3^{2-}[/tex]

Option (a) is the correct choice.

A conjugate acid-base pair, according to the Brnsted-Lowry definition of acids and bases, consists of two substances that are distinct only in that they contain a proton (H+). When a proton is supplied to a base, a conjugate acid is created, and vice versa when a proton is taken away from an acid, a conjugate base is created.

An illustration of a conjugate acid-base pair is HOCN and OCN-. There is only one proton (H+) that separates the two. Every base has a conjugate acid, and every acid has a conjugate base.

In the given chemical equation:

[tex]$$\begin{aligned}& \mathrm{HSO}_3{ }^{-}+{{\mathrm{CN}^-} \longrightarrow \:\:\:\:\:\:\:\mathrm{HCN}+\mathrm{SO}_3^2}^{2-} \\& \text { acid base } \text { conjugate base } \text { conjugate acid} \\& &\end{aligned}$$[/tex]

For more questions on conjugate acid-base pair

https://brainly.com/question/22514615

#SPJ4

The complete question should be like:

Identify the acid and conjugate base pair in the following:

[tex]$$\mathrm{HSO}_3{ }^{-}+\mathrm{CN}^{-} \rightarrow \mathrm{HCN}+\mathrm{SO}_3{ }^{2-}$$[/tex]

[tex](a) \:\mathrm{HSO}_3^-$ and $\mathrm{SO}_3{ }^{2-}\\(b) \:\mathrm{HCN}$ and $\mathrm{SO}_3{ }^{2-}\\(c) \:HSO_3^-$ and $CN^-\\(d)\: \mathrm{CN^-}$ and $S0_3{ }^{2-}[/tex]

Bulk polymerization is rarely adopted for large scale free radical polymerization because the process is not easily controlled

Bulk polymerization is an open system in which the reactants are not isolated from the surrounding environment, making it possible for external sources to influence the reaction conditions. In bulk polymerization, the entire mixture of monomers, initiator, and catalysts is placed in a single vessel and the reaction proceeds in a single, large-scale batch. This can lead to a number of problems, including uneven heat distribution, oxygen depletion, and uncontrolled reaction rates. Moreover, it is difficult to separate the desired product from the unreacted monomers and other byproducts, which can lead to product contamination. Additionally, bulk polymerization is usually limited to lower molecular weight poly This type of polymerization makes it difficult to maintain a constant monomer concentration and reaction temperature, both of which are crucial components in regulating free radical polymerization. In addition, bulk polymerization is more likely to produce byproducts that degrade the polymer's quality. All of these problems make bulk polymerization an ineffective and potentially hazardous choice for large-scale free radical polymerization.

please read more on

brainly.com/question/29213959

#SPJ4

68% of a given amount of the radium will remain after 600 years, the half-life of radium-226 is 1620 years.

Now, we shall proceed to obtaining the percentage of radium-226 that will after 900 years. This can be obtained as illustrated below:

Step 1

Determination of the number of half-lives that has elapsed.

Half-life (t½) = 1620 years

Time (t) = 900 years

Number of half-lives (n) =?

n= t/t1/2

n= 5/9

Step 2:

Determination of the amount remaining

Initial amount (N₀) = 1

Number of half-lives (n) = 5/9

Amount remaining (N) =?

N= No/2n

N = 0.68

Step 3

Determination of the percentage remaining.

Initial amount (N₀) = 1

Amount remaining (N) = 0.68

Percentage remaining =?

Percentage remaining = N/N₀ × 100

Percentage remaining = 0.68/1 × 100

Percentage remaining = 68%

Therefore, the percentage amount of radium-226 that remains after 900 years is 68%

Learn more about radium here:

https://brainly.com/question/9216557

#SPJ4

The equilibrium constant for the given reaction is K = [H₂]³[NaOH]⁶

The ratio of the concentration of the products raised to their coefficient to the ratio of the concentration of the reactants raised to their coefficients is how the equilibrium constant is defined, as we are aware.

However, specific reaction stages are not included in the formula for the equilibrium constant. These consist of:

Additionally, if the following are present in the reaction, the equilibrium constant expression must include them:

The following equation can be used to calculate the equilibrium constant for the given reaction:

6Na(s) + 6H₂O(l)+⥂6NaOH (aq) + 3H₂(g)

Equilibrium constant, K = [H₂]³[NaOH]⁶

Learn more about equilibrium constant:

brainly.com/question/16589765

#SPJ4

The periodic table is a chart that arranges elements in a useful and logical manner. Elements are listed in order of increasing atomic number, lined up so elements that exhibit similar properties are arranged in similar rows or columns as others.

There is a total of about 94 elements on the periodic table that occur in nature. Remaining all of the other elements are strictly human-made. Some sources state most elements occur naturally because heavy elements may transition between elements as they undergo radioactive decay.

The First artificially made element was Technetium. Technetium is the lightest element that has only radioactive isotopes (none are stable).

The rows in the periodic table are called periods.

Read more about Periodic Table:

https://brainly.com/question/11155928?referrer=searchResults

Answer:

Ne < C2H6 < CH3OH < KNO3

Explanation: Boiling point is highest in Ne and least in KNO3

Answer:

1.76 g/ml

Explanation:

98.7 / 56.1 = 1.7593582888

Round to the nearest hundredth = 1.76