Two methods are used by astronomers to determine the age of the universe: 1) searching for the oldest stars, and 2) calculating the universe's rate of expansion and extrapolating back to the Big Bang.
Just as homicide investigators can determine a bullet's source from the holes it leaves in a wall. to calculate the ages of old, nearby stars and the distance between Earth and numerous galaxies. According to the best calculations of scientists, the universe is 13.8 billion years old. However, we are not totally certain of its age, as we are with so many of the largest-scale characteristics of the cosmos.
Learn more about calculating here-
https://brainly.com/question/19930939
#SPJ4
You have lenses with the following focal lengths:f= 25mm, 50mm, 100mm, and 200mm. - n what arrangement would you use these lenses to get the highest-power telescope? Fo=200, fe=25
Answer:To use these lenses to get the highest power telescopeFo=
Explanation:
The magnifier. Then we need only one lens. The angular exaggeration of the magnifier when the object is put veritably near to the focal point is given by the formula
M =
f
25 cm
where ff is the focal point. thus, the lower the focal length the larger the exaggeration therefore we should elect the lens with the shortest focal length which is the one with
f = 25 mm.
Step 2
2 of 4
{ The microscope.} The microscope. Then we need two lenses. The angular exaggeration of the microscope is given by
L ⋅ 25 cm
thus, lower the product of the focal lengths of the two lenses the larger the exaggeration. thus we should elect the two lenses with the lowest focal lengths i.e. boxed{f_0 = 25
= 25 mm and f
e
= 50 mm.
Step 3
3 of 4
{ The telescope.} The telescope. Then we need two lenses. The angular exaggeration of the telescope is given by
M = - frac{f_0}{f_e}
M = −
f
e
f
0
i.e. it's directly commensurable to the focal length of the objective lens and equally commensurable to the focal length of the eye piece lens. thus we should elect the objective lens with the loftiest possible focal length and the eyepiece lens with the lowest possible focal length
when ultraviolet light with wavelength of 370.0 nm falls on certain metal surface, the maximum kinetic energy of the emitted photoelectrons is measured to be 1.40 ev. find the work function (binding energy) of the metal (in ev). (10 pts.)
The work function of the metal is 2.25 eV.
The work function, or binding energy, of a metal is the minimum energy required to remove an electron from the surface of the metal. In this case, the maximum kinetic energy of the emitted photoelectrons is 1.40 eV, which means that the energy required to remove the electron from the metal was at least 1.40 eV.
To find the work function of the metal, we can use the following equation:
Work function (eV) = Photon energy (eV) - Maximum kinetic energy of photoelectrons (eV)
Plugging in the values given in the problem, we get:
Work function (eV) = Photon energy (eV) - 1.40 eV
The energy of a photon can be calculated using the equation:
Photon energy (eV) = hc / wavelength (m)
Where h is the Planck constant (6.626 x [tex]10^{-34}[/tex] J × s), c is the speed of light (2.998 x [tex]10^{8}[/tex] m/s), and wavelength is the wavelength of the photon in meters.
Plugging in the values and converting the wavelength to meters, we get:
Photon energy (eV) = (6.626 x [tex]10^{-34}[/tex] J × s) × (2.998 x [tex]10^{8}[/tex] m/s) / (3.70 x [tex]10^{-7}[/tex] m)
= 3.65 eV
Substituting this value back into the first equation, we get:
Work function (eV) = 3.65 eV - 1.40 eV
= 2.25 eV
Learn more about work functions at
https://brainly.com/question/10095561?referrer=searchResults
#SPJ4
wave interference occurs for a. sound waves. b. light waves. c. water waves. d. all of the above choices are correct. e. none of the above choices are correct
Wave interference occurs for: sound waves, light waves. water waves. all the given option is correct.
What is Wave Interference?
The result of two or more waves colliding is interference. Depending on how the peaks and troughs of the overlapping waves line up, they may add up or may partially or completely cancel one another. The interference definition states that it is
The occurrence when two or more waves combine to generate a new wave with a bigger, smaller, or same amplitude.
The medium adopts a form as a result of the net influence of the two distinct waves due to wave interference. Let's use the example of two pulses with the same amplitude moving in opposite directions in the same medium to better comprehend.
Learn more about Wave Interference from given link
https://brainly.com/question/12466679
#SPJ1
if two cars are both travelling at 50 km/h and they collide head on, the effect is similar to a car colliding with a wall at what velocity ?
The effect is similar to a car colliding with a wall at a velocity of 50 km/h.
What is the principle of conservation of linear momentum?
The principle of conservation of linear momentum states that the sum of the initial momentum is equal to sum of the final momentum, provided that the system is Isolated.
Mathematically, the law of conservation of linear momentum is given as;
Pi = Pf
where;
Pi is the sum of the initial momentumPf is the sum of the final momentumm₁u₁ = m₂u₂
where;
m₁ is the initial massu₁ is the initial velocitym₂ is the final massu₂ is the initial velocityBased on Newton's third law of motion, action and reaction are equal and opposite.
If the car collides with a stationary wall, the wall will exert equal and opposite reaction to the car. If a car hits a wall with a velocity of 50 km/h, the wall will move at a velocity of 50 km/h provided it has equal mass with the car.
Learn more about conservation of linear momentum here: https://brainly.com/question/7538238
#SPJ1
the moon has a mass of 1×1022 kg, and the gravitational field strength at a distance r from the planet is 0.001 n/kg. what is the gravitational force exerted on the moon while it is in orbit around the planet?
a. 0 N
b. 1 x 10^19 N
c. 1 x 10^22 N
d. 1 x 10^25 N
The gravitational force exerted on the moon of mass 1×10²² kg is 1×10¹⁹ N. And the right option is b. 1×10¹⁹ N
What is gravitational force?Gravitational force is the most prevalent force in the universe, pulling together on any two objects with mass in the universe.
To calculate the gravitational force exerted on the moon, we use the formula below.
Formula:
F = mE.................... Equation 1Where:
F = Gravitational forcem = Mass of the moonE = Gravitational field strengthFrom the question,
Given:
m = 1×10²² kgE = 0.001 N/kgSubstitute these values into equation 1
F = ( 1×10²²×0.001)F = 1×10¹⁹ NHence, the gravitational force exerted on the moon is 1×10¹⁹ N.
Learn more about gravitational force here: https://brainly.com/question/27943482
#SPJ1
A 48 cm long metal rod is oriented horizontally in a uniform magnetic field with magnetic flux density of 340 g. The magnetic field is directed vertically down into the ground. The metal rod is moved with a speed of 13 m/s in a horizontal direction perpendicular to the length of the rod. Neglect the magnetic field of earth at the location of this apparatus. Determine the potential difference induced in the rod. Calculate the answer in the units of v. Write your answer in decimal form with three digits to the right of the decimal point (e. G. 5. 374); do not write any units
The potential difference induced in the rod is approximately -6.912 v. In general, the potential energy of an object is equal to the work done to move the object to its current position, against the forces acting on it.
Potential energy is a form of energy that an object possesses due to its position in a gravitational field or due to its configuration. It is the energy that an object has due to its position in a system, rather than its motion.
The potential difference induced in the rod is given by Faraday's law of electromagnetic induction:
ΔV = -(BLv)
where B is the magnetic flux density, L is the length of the rod, and v is the speed at which the rod moves through the magnetic field.
Plugging in the given values, we have:
ΔV = -(340 g * 48 cm * 13 m/s)
Converting the length to meters and the magnetic flux density to teslas, we have:
ΔV = -(0.34 T * 0.48 m * 13 m/s)
= -6.912 v
So the potential difference induced in the rod is approximately -6.912 v.
Learn more about potential, here https://brainly.com/question/24284560
#SPJ4
the highest frequency ultrasound devices have frequencies around 20 mhz. what is the wavelength of these sound waves inside the body?
The highest frequency ultrasound devices have frequencies around 20 mhz. 5 m lambda to 15 m lambda is the wavelength of these sound waves inside the body.
Formula for sound wave = sound wavelength (λ) = sound velocity (v) / Sound frequency (F).
After calculating sound wavelength by the above formula we get the wavelength in between 5 to 15.
A periodic wave's wavelength is its spatial period, or the length over which its shape repeats. It is a property of both traveling waves and standing waves, as well as other spatial wave patterns. It is the distance between two successive corresponding locations of the same phase on the wave, such as two neighboring crests, troughs, or zero crossings. The spatial frequency is the reciprocal of wavelength. The Greek letter lambda is frequently used to represent wavelength. The term wavelength is also occasionally used to refer to modulated waves, their sinusoidal envelopes, or waves created by the interference of several sinusoids. Wavelength and frequency are inversely related, with shorter wavelengths for higher frequencies and longer wavelengths for lower frequencies, assuming a sinusoidal wave travelling at a constant wave speed. The medium (such as a vacuum, air, or body of water) through which a wave travels determines its wavelength. Waves can be anything from music to light to water to periodic electrical signals in a conductor.
To know more about wavelength please refer: https://brainly.com/question/19953701
#SPJ4
i need the answer for this one
Answer:
120 N.
Explanation:
This can be calculated using Newton's second law of motion, which states that the net force acting on an object is equal to the mass of the object multiplied by its acceleration (F = ma).
In this case, the mass of the object is 60 kg, and its acceleration is 2 m/s^2. so,the net force acting on the object is 60 kg * 2 m/s^2 = 120 N.
what makes the earth different from the other worlds that might have life in the solar system (and easier to detect from far away) is that only earth .
The solar system has a biosphere on its surface where photosynthesis can take place.
What is Biosphere?
The biosphere, usually referred to as the ecosphere, is the sum of all ecosystems on the planet. The area where life exists on Earth is another name for it. According to certain descriptions, the biosphere is practically a closed system in terms of matter, with few inputs and outputs.
The biosphere, according to the broadest definition of biophysiology, is the ecological system that encompasses all living things and their relationships, including their interactions with the lithosphere, geosphere, hydrosphere, and atmosphere.
It is generally believed that the biosphere began to evolve at least 3.5 billion years ago, beginning with a process of biopoiesis (which means life formed spontaneously from non-living matter, such as simple organic molecules) or biogenesis (which means life created from living stuff).
Learn more about Biosphere from given link
https://brainly.com/question/12467010
#SPJ1
an object of mass m moves at a constant speed v around a circular path of radius r. the net force applied on the object is f. if the acceleration of the object is halved, what happened to the mass?
A mass m object travels along a circular path with a radius r at a constant speed v. The object is subjected to a net force of f. The mass stays unchanged if the object's acceleration is cut in half.
An item moving in a circle at a consistent speed is known as uniform circular motion. An object constantly changes its direction as it moves in a circle. The object is always traveling tangent to the circle.
Given that an object experiences centripetal force as it moves in a circular motion.
So, Force (f) is = mv2/r, where m is an object's mass, v is its speed, and r is its path's radius.
In this case, centripetal acceleration is equal to (ac) = v2/r.
Given that when acceleration is halved:
ac' = ac/2 = v^2/2r
There is no effect on mass as it will remain constant throughout the circular motion of the object but net force will be effected.
To learn more about net force click here https://brainly.com/question/18031889
#SPJ4
question a 2 kg mass and a 5 kg mass are connected by a massless cord suspended over a massless and frictionless pulley. if the acceleration due to gravity is g, what will be the acceleration of the masses after they are released from rest?
The masses accelerate at a speed of 3g13 m/s2 after being released from rest.
m1 is 2 kilogram, while m2 is 5 kg. Because the pulley has no friction and no mass, the tension force on both sides of the string will be the same. [An inactive state for the Law of Motion] Both masses accelerate at the same rate. Let's say it is a m/s2.
Remember that 2 kg of mass is flowing downhill while 5 kg of mass is traveling upward, or the opposite is true.
Let's begin writing equations.
m1 g - T = m1a for a mass of 2 kg.
2g - T = 2a ————— (I) For a mass of 5 kg, T - m2g = m2a
T - 5g = 5a ————— (II) By combining the two equations, we arrive at 2g - 5g = 13a a = 3g13 m/s2.
To know more about Acceleration visit:
https://brainly.com/question/12550364
#SPJ4
Pellets of mass 2.0 g are fired in parallel paths with speeds of 120 m/s through a hole 1.5 mm in diameter.How far from the hole must you be to detect a 1.0-cm-diameter spread in the beam of pellets?
The distance from the hole must be 2.244 × 10⁻²⁷ m to detect a 1.0 cm diameter spread in the beam of pellets.
Given that,
Mass of the pellet m = 2 g
Speed of the pellet v = 120 m/s
Diameter of the hole d = 1.5 mm = 1.5 × 10⁻³ m
Distance between the pellet and the hole D = 1 cm = 1 × 10⁻² m
Let us find the wavelength,
λ = h/mv = (6.626 × 10⁻³⁶)/(2 × 120) = 2.76 × 10⁻³³ m
So, y = (1.22 λD)/d = (1.22 × 2.76 × 10⁻³³ × 1 × 10⁻²)/(1.5 × 10⁻³) = 2.244 × 10⁻²⁷ m
Thus, the distance from the hole must be 2.244 × 10⁻²⁷ m to detect a 1.0 cm diameter spread in the beam of pellets.
To know more about pellets:
https://brainly.com/question/13238640
#SPJ4
what is the wavelength of an electromagnetic wave that has a frequency of 1 hertz? a. less than 1 m b. 1 m c. more than 1 m
The wavelength of an electromagnetic wave that has a frequency of 1 hertz more than 1 m.
In a vacuum, electromagnetic waves move at a constant speed of 3.00 x 108 ms-1. Both the magnetic and electric fields have no effect on them. However, they can exhibit diffraction or interference. Any medium, including air, a solid, or a vacuum, can be traversed by an electromagnetic wave. It is not dependent on a medium to spread or move from one location to another. The opposite is true for mechanical waves, which require a medium to propagate (like sound or water waves). Transverse waves are electromagnetic waves. Thus, they are evaluated based on their amplitude (height) and wavelength (distance between the highest and lowest points of two successive waves).
Learn more about electromagnetic wave here:
https://brainly.com/question/3101711
#SPJ4
Two positive point charges q are placed on the x-axis, one at x = a and one at x = -a.a. Derive an expression for the electric field at points on the x-axis, where ?a < x < a.
Th electric field at a point between 2 points is given by E = [tex]\frac{4kQax}{(a^2 - x^2)^2}[/tex] (-i^)
Formula for electric field at a point on x-axis is given by:
E = [tex]\frac{kq}{r^2}[/tex] ----(i)
where k is constant, q is magnitude of charge and r is the distance from charge where electric field is to be found.
Q (-a,0)____________________(x,0)_____________________Q(a,0)
so we have to fing electric field at point (x,0) due to the both charges shown in the figure.
due to point charge at pont (-a,0) the electric field is in the positive x direction and due to charge at point (a,0) the electric field is in negative x direction.
let [tex]E_1[/tex] be the electric field due to charge at point (-a,0)
let [tex]E_2[/tex] be the electric field due to charge at point (a,0)
[tex]E_1[/tex] = [tex]\frac{kQ}{(a+x)^2}[/tex] (i^)
where i^ is unit vector along x- axis
[tex]E_2[/tex] = [tex]\frac{kQ}{(a-x)^2}[/tex] (-i^)
[tex]E_1+E_2 = \frac{kQ}{(x+a)^2}[/tex] i^ [tex]+ \frac{kQ}{(a-x)^2}[/tex] (-i^)
=> [tex]\frac{-4kQax}{(a^2-x^2)^2}[/tex] i^
so [tex]E_1 + E_2 =[/tex] [tex]\frac{4kQax}{(a^2 - x^2)^2}[/tex] (-i^)
so for any point a < x < a .
Th electric field is given by E = [tex]\frac{4kQax}{(a^2 - x^2)^2}[/tex] (-i^)
To know more about electric field click on below link:
https://brainly.com/question/8971780#
#SPJ4
a line in the spectrum of atomic mercury has a wavelength of 255 nm. when mercury emits a photon of light at this wavelength, the frequency of this light is
The frequency of light is 1.18 × 10^15Hz
Wavelength = 255m
The frequency of light is the number of cycles of the light wave that pass a given point in a specified amount of time. Light waves are electromagnetic waves that are characterized by their frequency, which is measured in hertz (Hz).
Calculating the frequency -
f = c/ λ
where c is the speed of light and λ is the wavelength
Thus,
c = 3 × 10^18 m/s
λ = 255 × 1/ 10^9
= 255 × 10^7
Substituting the values in the formula -
= 3 × 10^18 / 255 × 10^7
= 1.18 × 10^15
Read more about the frequency of light on:
https://brainly.com/question/24912764
#SPJ4
a man 1.9 m tall is standing 4.0 m from the edge of the barn. will he be hit by the snowball?
The man will not be hit by the snowball as it passes well above him without touching him.
(a) The length of time in the air is determined by vertical motion.
ax = 0
ay = 9.8 m/s²
vx = v₀ cosθ₀ = 7 cos 40° = 5.36 m/s
vy = v₀ sinθ₀ = 4.5 m/s
Distance from the ground is given as s = 14 m, so,
14 = 4.5 t + (1/2 × 9.8 × t²)
4.9 t² + 4.5 t - 14 = 0
The positive root of t = 1.29 s
The horizontal distance, vx t + (1/2 × ax × t²) = 6.91 m
(b) We know, x - x₀ = vx t + (1/2 × ax × t²)
As ax = 0,
t = (x - x₀)/vx = 4/5.36 = 0.746 s
During this time, the snowball travels a horizontal distance
y - y₀ = vy t + (1/2 × ay × t²) = 6.08 m
Hence, 14 - 6.08 = 7.9 m above the ground and the snowball passes above the man without hitting him.
The question is incomplete. The complete question is '(a) A snowball rolls off a barn roof that slopes downward at an angle of 40°. The edge of the roof is 14.0 m above the ground and the snowball has a speed of 7.00 m/s as it rolls off the roof. How far from the edge of the barn does the snowball strike the ground if it doesn't strike anything else while falling?
(b) A man 1.9 m tall is standing 4.0 m from the edge of the barn. Will he be hit by the snowball?'
To know more about the snowballs:
https://brainly.com/question/13997218
#SPJ4
how many kilometers would you have to go above the surface of the earth for our weight to decrease to half of what it was at the surface
We have to go above 2651 kilometres of the earth for our weight to decrease to half of what it was at the surface.
Geophysics applies the concepts of physics to take a look at the Earth. It deals with things like the motion of the Earth's crust and the temperatures of its interior.
Geology is the scientific study of the earth, including the elements that make it up, the processes that shape it, how it was formed, and information about the planet's past and how it has been ever since. Today, geology also encompasses an examination of distant worlds.
We define the earth via thinking about other people as our enemies, outsiders and foreigners; by dividing our earth into international locations and by developing enmity in opposition to any other institution of people.
To know more about weight:
https://brainly.com/question/29854312
#SPJ4
a 0.950-kg ball is dropped from rest at a point 3.30 m above the floor. the ball rebounds straight upward to a height of 1.90 m. taking the negative direction to be downward, what is the impulse of the net force applied to the ball during the collision with the floor?
The impulse of is the product of the average force and the duration it is excreted. The impulse of the net force exerted to the ball during the impact with the floor was 4.28 N-s in magnitude and direction.
The ball weighs 0.500 kg, according to the information provided.
The floor is 1.2 meters high.
The force of impulse
The impulse of is the product of the average force and the duration it is excreted.
One instant before the collision, the velocity is 4.852 meters per second.
One instant after the collision with the floor, the velocity was 3.71 meters per second squared.
The magnitude and direction of the ball's net force impulse during the collision with the floor.
4.28N-s.
Learn more about force here-
https://brainly.com/question/13191643
#SPJ4
the north celestial pole is 35∘ above your northern horizon. this tells you that you are at:
You are at latitude 35∘ N , if the north celestial pole is 35∘ above your northern horizon . The north celestial pole is a point where all stars can be seen from the northern hemisphere.
All of the stars visible from the Northern Hemisphere spin about the North Celestial Pole in the sky. North Street Polaris stays virtually immobile in the sky and all the stars in the northern sky appear to revolve around it because it is almost directly aligned with the Earth's axis of rotation "above" the North Pole, the north celestial pole. This spot in the sky is virtually exactly where ar, also known as Polaris, is located.
The reasonably brilliant Pole Star is located extremely close to the North Celestial Pole, making it simple to detect it in the night sky. But there are no observable stars near the South Celestial Pole. All of the stars in the sky are centred on the North Celestial Pole.
For more such questions on Northern horizon :
brainly.com/question/731197
#SPJ4
For a group class project, students are building model roller coasters. Each roller coaster needs to begin at the top of the first hill, where a horizontal spring that is initially compressed 0.25 m will push a small car forward.
A hill with a compressed spring at the top. There is a car sitting against the compressed spring. The portion of the hill is vertically colored orange, the middle section is vertically colored yellow and the last section colored green.
Each group of students will choose a car and a spring to push the car and then build a track. The assignment is to make the car go 5.0 m/s when it reaches the bottom of the first hill. Four groups of students choose springs and build tracks as described in the table.
A 4 column table with 4 rows. The first column is labeled group with entries A, B, C, D. The second column is labeled car mass in kilograms with entries .75, .60, .55, .84. The third is labeled spring constant in newtons per meter with entries 65, 35, 40, 32. The last column is labeled hill height in meters with entries 1.2, .90, 1.1 , .95.
Which group’s roller coaster will most likely make the car travel closest to 5.0 m/s when it is at the bottom of the first hill?
A
B
C
D
The group that will make the car travel closest to 5 m/s when it is at the bottom of the first will is of:
Group C.
How to obtain the velocity for each car?The velocity that each car will assume at the bottom of the hill is given by the equation presented as follows:
v = square root (2gh + kx²/m).
The parameters are given as follows:
g = 9.8 m/s is the acceleration relative to the gravity.h is the height of the hill.k is the spring constant.x = 0.25 represents the initial compression of the spring.m is the mass of the car.The parameters are given by the table in this problem, hence the velocities of each car are given as follows:
Group A: v = square root(2 x 9.8 x 1.2 + (65 x 0.25²)/0.75) = 5.38 m/s.Group B: v = square root(2 x 9.8 x 0.9 + (35 x 0.25²)/0.6) = 4.61 m/s.Group C: v = square root(2 x 9.8 x 1.1 + (40 x 0.25²)/0.55) = 5.05 m/s. -> closest to 5 m/s.Group D: v = square root(2 x 9.8 x 0.95 + (32x 0.25²)/0.84) = 4.58 m/s.More can be learned about velocities and springs at https://brainly.com/question/13858183
#SPJ1
Answer: group C
Explanation:
what is the frequency of a photon that is emitted when the dipole moment of a proton flips in a magnetic field of 2.1 t? the energy of a photon is related to its frequency by the equation e
42 Hz is the frequency of a photon that is emitted when the dipole moment of a proton flips in a magnetic field of 2.1 t, the energy of a photon is related to its frequency by the equation e.
The magnetic influence on moving electric charges, electric currents and magnetic materials is described by a magnetic field, which is a vector field. A force perpendicular to the charge's own velocity and the magnetic field acts on it when the charge is travelling through a magnetic field. The magnetic field of a permanent magnet pulls on ferromagnetic substances like iron and attracts or repels other magnets. Paramagnetism, diamagnetism, and antiferromagnetism are three additional magnetic effects that a nonuniform magnetic field can have on "nonmagnetic" materials, albeit these forces are often so minute that they can only be detected by laboratory equipment. Electric currents, like those utilized in electromagnets, and electric fields that change in time produce magnetic fields that surround magnetized things. Electric charges in motion and the intrinsic magnetic moments of elementary particles, which are connected to their spin, a fundamental quantum feature, create magnetic fields. As parts of the electromagnetic force, one of the four fundamental forces of nature, magnetic and electric fields are interdependent.
To know more about magnetic field please refer: https://brainly.com/question/24397546
#SPJ4
which arrangement of the sun, the moon, and the earth results in the highest high tides, and the lowest low tides on earth
Due to the alignment of the earth, moon, and sun, the moon and sun's gravitational pulls work in the same direction, producing the highest high tides and the lowest low tides.
What path does physics follow?Location in relation to another object is referred to as direction. Relative terminology, such as up, down, out, left, right, forward, backward, or sideways, can be used to express direction by comparing the position of one item to another.
How do you define direction?Direction can refer to the way something moves, the way you must go to get somewhere, the way something is beginning to take shape, or the direction you are facing.
To know more about Directions visit:
https://brainly.com/question/14897803
#SPJ4
Weighing a Bacterium Scientists are using tiny, nanoscale cantilevers 4 micrometers long and 500 nanometers wide-essentially miniature diving boards-as a sensitive way to measure mass. The cantilevers oscillate up and down with a frequency that depends on the mass placed near the tip, and a laser beam is used to measure the frequency. A single E. coli bacterium was measured to have a mass of 710 femtograms = 7.10×10−16 kg with this device, as the cantilever oscillated with a frequency of 17.1 MHz .
Treating the cantilever as an ideal, massless spring, find its effective force constant.
If we consider the cantilever to be a perfect, massless spring, then K = 5.952N/m is its effective force constant.
How does science define force?The meaning of the term "force" is obvious. At about this point, it's perfectly permissible to describe a force as shoving or pulling. An object doesn't "have a force in it" or "contain a force." A force is applied to one thing by another.
Why is force such a big deal?A force can be a push or a pull, and it affects how we go about our daily lives because we can't open or close items, raise our legs or arms or accomplish a lot more without it.
BriefingNumerous E coli bacteria, m = 7.10 × 10⁻¹⁶
frequency =17.1 MHz
frequency of vibration, F = 1/2π√K/M
17.1×10⁶= 1/2π√K/ 7.10 × 10⁻¹⁶
K/ 7.10 × 10⁻¹⁶ = 7.10 ×10¹⁵
K = 5.952N/m
To know more about force visit:
https://brainly.com/question/28875770
#SPJ4
What type of separation methods are described in the recipe? decantation and screening distillation and screening decantation and centrifugation distillation and filtration.
Type of separation methods described in the recipe are: A. decantation and screening.
What is decantation and screening?Process for the separation of mixtures of immiscible liquids or of a liquid and a solid mixture such as a suspension is called decantation. In this process, the precipitated liquid is separated from solid. According to the given instruction for the recipe, fat which is in liquid state is separated from the meat.
Practice of taking granulated ore material and separating it into multiple grades by particle size is called screening. In the process of screening, more liquid is separated by placing mixture on the screen. In this, gravity plays an important role for the process of separation.
To know more about separation technique, refer
https://brainly.com/question/24645716
#SPJ4
Note: The question given on the portal is incomplete. Here is the complete question.
Question: A recipe gives the instructions below
After browning the meat pour off fat from the pan to further reduce fat use a strainer.
what type of separation methods are described in the recipe
A decantation and screening
B distillation and screening
C decantation and centrifugation
D distillation and filtration
what maximum power can be radiated by a 13 cmcm -diameter solid lead sphere? assume an emissivity of 1.
Maximum power can be radiated by a 13 cm diameter solid lead sphere
is 232W
The melting point of lead, which is T = 328°c, is the highest temperature that can be raised.
The sphere's area is A = D2.
Using the maximum radiated power as a baseline and by inserting the values of the numbers:
P = 1.56 × [tex]10^{-8}[/tex] × 0.1² ×601³ = 232W
Energy transfer or conversion rate expressed as power. One joule per second, or one watt, is the definition of power in the International System of Units. Power is referred to as activity in some ancient writings. Scalar quantities include power.
Power is related to other factors; for instance, the power required to move a ground vehicle is calculated as the product of the vehicle's velocity, its aerodynamic drag, and the traction force on its wheels. The torque that a motor produces is multiplied by the angular velocity of its output shaft to produce the output power of the motor. Similarly, the power dissipated in an electrical component of a circuit is the sum of its current and voltage across the element.
Learn more about power here:
https://brainly.com/question/14472141
#SPJ4
a spring with a force of 2.9 n / m has a relaxed 0.85 m distance, when a 0.5 kg mass is attached it stretches to 1.65 m. what is the elastic potential energy?
The calculated answer is 1.96kg * m \s2\s /2. The energy that is stored when a force is used to deform an elastic object is known as elastic potential energy.
Until the force is released and the object springs back to its original shape, doing labor in the process, the energy is retained. The object may be compressed, stretched, or twisted during the deformation. Since you are aware of the spring constant k, which is 144 N/m, and the spring stretch from equilibrium position x, which is 16.5 cm, or 0.165, you can use the equation
PE = 2 1 kx 2
= 2 1144(.165) 2
to determine the potential energy of the spring.
This, if you prefer SI terms, is kg * m 2 /s2, or 1.96 Joules.
Learn more about energy here-
https://brainly.com/question/1932868
#SPJ4
a current of 0.30 a is passed through a lamp for 2.0 minutes. the energy dissipated by this lamp during the 2.0 minutes is 216 j. what is the potential (in v) of the power supply?
The potential (in v) of the power supply 6 Volt.
Calculation :
The energy formula ,
H = VIT
Where,
H=energy dissipated the lamp
I=current through the lamp
V = potential difference
t=time during which the current flows through the lamp
From the question we have,
Current(I)=0.3A
The Energy supplied(E)=216 j
Time during which the current flows(t)=2 minutes=2×60 seconds
H = VIT
216 j = v * 0.3 A *120 sec
V = 216/( 0.3 A *120 sec)
V = 6 Volt
Scientists define energy as the ability to do work. Modern civilization is possible because humans have learned to convert energy from one form to another and use it for work.
Learn more about energy here : https://brainly.com/question/13881533
#SPJ4
A figure skater is spinning slowly with arms outstretched. Shebrings her arms in close to her body and her moment of inertiadecreases by 1/2. Her angular speed increases by a factor ofA. 2B. 1C. 4D. square root of 2E. 1/2
She draws her arms close to her body, which causes her moment of inertia to fall by half. She moves at an angle that is faster by a factor of A. 2B. 1C. 4D. L=Iω
L=Iω
L is a constant that is inversely proportional to the rotational inertia and the angular speed due to the conservation of angular momentum.
Whenever "I" falls, rises proportionately (inversely related) A - Unless you meant increased, which you didn't, Part B is asking the same thing. B would follow from that. If not, Part C proceeds as in Part A: That key equation indicates that they are inversely proportional. In terms of, we solve for ω
I=L/ω
The moment of inertia of a rigid body, also known as the mass moment of inertia, angular mass, second moment of mass, or more precisely, rotational inertia, is a property that establishes the torque required for the desired angular acceleration about a rotational axis, much like mass establishes the force required for the desired acceleration. Depending on the axis selected and the distribution of the body's mass, it may take more torque to modify the body's rate of rotation for bigger moments.
Learn more about moment of inertia here:
https://brainly.com/question/29415485
#SPJ4
5 V battery with metal wires attached to each end.
The figure shows two wires connected to a battery’s positive and negative terminals. These wires stop short of completing a circuit. Four points are marked on the wires. Point 1 is at the end of the wire connected to the positive terminal. Point 2 is at the negative terminal. Point 3 is at the positive terminal. Point 4 is at the end of the wire connected to the negative terminal.
What are the potential differences ΔV12=V2−V1, ΔV23=V3−V2, ΔV34=V4−V3, and ΔV41=V1−V4?
Enter your answers numerically separated by commas
The potential differences is ΔV12=V2−V1=0V
ΔV23=V3−V2=5V
ΔV34=V4−V3= 0V
and ΔV41=V1−V4=-5V
From the figure, there is no connection between the points 1 and 4 . Hence, the potential at the points 4 and 3 is same and is equal to zero.
[tex]\Delta V_{34} & =V_4-V_3 \\& =0[/tex]
Similarly, the potential at the points 1 and 2 is same and is equal to zero.
[tex]\Delta V_{12} & =V_2-V_1 \\& =0[/tex]
The potential difference between the points 4 and 1 is equal to potential difference between the points 3 and 2.
Given that the potential difference across the points 3 and 2 is,
[tex]\Delta V_{23} & =V_3-V_2 \\& =5 \mathrm{~V}[/tex]
The potential difference between the points 4 and 1 is also 5V.
[tex]\Delta V_{41} & =-\Delta V_{23} \quad\left(\because \Delta V_{23}=\Delta V_{14}\right) \\& =-5 \mathrm{~V}[/tex]
Therefore, the required answer is 0,5V, 0,-5V.
For more such question on Potential.
https://brainly.com/question/24933254
#SPJ4
Note:- The correct question could be,
5 V battery with metal wires attached to each end.
The figure shows two wires connected to a battery’s positive and negative terminals. These wires stop short of completing a circuit. Four points are marked on the wires. Point 1 is at the end of the wire connected to the positive terminal. Point 2 is at the negative terminal. Point 3 is at the positive terminal. Point 4 is at the end of the wire connected to the negative terminal.
What are the potential differences ΔV12=V2−V1, ΔV23=V3−V2, ΔV34=V4−V3, and ΔV41=V1−V4?
Enter your answers numerically separated by commas
the perfect order measures how effectively logistics serves the customer while the landed cost measures how efficiently logistics provides that service.a) trueb) false
AutoLFADS is a framework for large-scale neural network training for generalised estimate of single-trial population dynamics.
What is neural network ?
Deep learning techniques are based on neural networks, sometimes referred to as artificial neural networks (ANNs) or simulated neural networks (SNNs), which are a subset of machine learning. Their structure and nomenclature are modelled after the human brain, mirroring the communication between organic neurons.
Deep neural network of population dynamics models require considerable hyperparameter adjustment for each dataset to function at the cutting edge. Without using behavioural or task information, AutoLFADS is a model-tuning framework that generates high-performing autoencoding models automatically using data from a range of brain regions and activities.
To learn more about population click here:
https://brainly.com/question/27991860
#SPJ4