Answer:
The importance of the sediments permeability is that if it is permeable, water will flow easily through the sediment and thereby produce a very good supply of water for the well.
Explanation:
When digging a well into saturated sediments, the possibility of the sediment with either little saturation or full saturation being able to provide steady water supply will be limited by how permeable it is. Now, the importance of the sediments permeability is that if it is permeable, water will flow easily through the sediment and thereby produce a very good supply of water for the well.
On a winter day a child of mass 20.0 kg slides on a horizontal sidewalk covered in ice. Initially she is moving at 3.00 m>s, but due to friction she comes to a halt in 2.25 m. What is the magnitude of the constant friction force that acts on her as she slides
Answer:
40 N
Explanation:
According to the scenario, computation of given data are as follows:
Mass (m) = 20 kg
Initially moving (v) = 3
Actual distance (d) = 2.25 m
So, we can calculate friction (f) by using following formula,
f × d = [tex]\frac{1}{2} mv^{2}[/tex]
By putting the value, we get
f × 2.25 = [tex]\frac{1}{2}[/tex] × 20 × [tex]3^{2}[/tex]
f × 2.25 = 10 × 9
f = 90 ÷ 2.25
= 40 N.
The mass of 60 paper clips is 18.0 grams. What is the mass of one paper clip?
Answer:
3.333333333333333333333333333333333333333
Explanation:
3.3333333333333333333333333333333333
1. (6x + 8)(5x - 8)
a. 30x2 + 49x + 20
2. (5x + 6(5x - 5)
b. 24x3 + 8x2 + 6x + 4
3. (6x + 3)(6x - 4)
c. 25x2 + 5x - 30
4. (6x + 5)(5x + 5)
d. 30x2 - 8x - 64
e. 36x2 - 6x - 1
5. (4x + 2) (6x2 - x + 2)
Answer:
form 1 question??????????
A player holds two baseballs a height h above the ground. He throws one ball vertically upward at speed v0 and the other vertically downward at the same speed. Obtain expressions for the speed of each ball as it hits the ground and the difference between their times of flight. (Assume the positive direction is upward.) HINT
Answer:
a) v = √(v₀² + 2g h), b) Δt = 2 v₀ / g
Explanation:
For this exercise we will use the mathematical expressions, where the directional towards at is considered positive.
The velocity of each ball is
ball 1. thrown upwards vo is positive
v² = v₀² - 2 g (y-y₀)
in this case the height y is zero and the height i = h
v = √(v₀² + 2g h)
ball 2 thrown down, in this case vo is negative
v = √(v₀² + 2g h)
The times to get to the ground
ball 1
v = v₀ - g t₁
t₁ = [tex]\frac{v_{o} - v }{ g}[/tex]
ball 2
v = -v₀ - g t₂
t₂ = - \frac{v_{o} + v }{ g}
From the previous part, we saw that the speeds of the two balls are the same when reaching the ground, so the time difference is
Δt = t₂ -t₁
Δt = [tex]\frac{1}{g} \ [(v_{o} - v) - ( - v_{o} - v) ][/tex]
Δt = 2 v₀ / g
Calculate the work done to raise a charge of 25 coulombs through an emf of 8 volts.
1) 3
2) 200
Corrected, it's 2) 200
How much kinetic energy does a 0.104 kg hamster have if it is moving at 24.0 m/s?
Answer:
30J
Explanation:
Given parameters:
Mass of hamster = 0.104kg
Velocity = 24m/s
Unknown:
Kinetic energy = ?
Solution:
Kinetic energy is the energy due to the motion of a body. It is mathematically derived by;
Kinetic energy = [tex]\frac{1}{2}[/tex] m v²
m is the mass
v is the velocity
Kinetic energy = [tex]\frac{1}{2}[/tex] x 0.104 x 24² = 30J
Select all the correct answers.
Suppose a team of astronomers recently discovered a solar system similar to our own, but in an earlier stage of
development. Based on how the planets of our solar system formed, which two observations would you expect the
astronomers to make?
- dense, rocky objects near the central star
- thick clouds of liquid helium orbiting near the central star
- planetesimals orbiting in different directions around the central star
- clusters of rock loosely held together by gravity
- the rate of rotation slowing down for all objects
Answer:
Dense, rocky objects orbiting near the central star.
Cluster of rock loosely held together by gravity
Explanation:
"Stars are huge, glowing balls of gases. "The closest star to Earth is the Sun. Most of the pinpricks of light that shine in the night sky are also stars. Countless more stars are too far from Earth to be seen without a telescope. Most stars are incredibly far away.
What is gravity ?"Gravity is the force by which a planet or other body draws objects toward its center. The force of gravity keeps all of the planets in orbit around the sun."
Know more about stars here
https://brainly.com/question/24493066
#SPJ2
A student releases a small cart at the top of an incline with height H above the floor. The cart experiences very little friction. The student is attempting to cause the cart to go around a vertical loop of radius R without the cart losing contact with the track at the top. The student suggests that the heigt H should equal 2R so that the release height and maximum height of th eloop are the same. However, the student finds that it requires noticably higher hieght than 2R for the cart to go around the loop. Explain why H must be noticably greater than 2R to complete the loop. (Hint: In order for the cart to go around the loop it must have a nonzero velocity at the top of the loop.) answer
Answer:
Explanation:
In the whole process , potential energy of the cart is converted into kinetic energy . At the top of the vertical loop , the whole of potential energy is regained and kinetic energy becomes zero if we release the cart from a height of 2R because difference of height between lowest and highest point of motion is 2R . In that case kinetic energy at top = 0 , velocity v = 0
At the top , weight mg is acting which is providing centripetal force . So cart must have some velocity at the top . If it be v
mv²/R = mg
v = √ gR .
For that purpose , the cart must be released from a height greater than 2R .
The extra height beyond 2R will make the velocity at the top non-zero.
HELP PLS
Which of the following statements about suspensions is TRUE?
a. A suspension contains particles smaller than those of a solution.
b. A suspension cannot be filtered.
c. The large particles in a suspension eventually settle to the bottom of the container.
d. A suspension is a true solution.
Answer:
I think it might be C.
Explanation:
Answer:
c. The large particles in a suspension eventually settle to the bottom of the container.
Explanation:
The correct statement from the given choices is that the large particles in a suspension eventually settle to the bottom of the container.
A suspension is a mixture made up of small insoluble particles of a solid in a liquid or gas.
They have the following properties:
They settle on standingThe particles do not pass through ordinary filter paperThe particles do no pass through permeable membrane Their particles are visible with the naked eyes.A Physics 206 student astutely notices that her friend's car, which has extremely bad shocks, has a frequency of oscillation of 0.5 Hz after hitting a bump. She asks her friend how much the car weighs and converts that to a mass of 1,750 kg. After a few minutes of figuring on the back of an envelope (a habit all physics-types learn to do) she announces the value of the total spring constant of her friend's car. What value did she find
Answer:
i don't see anythiung
Explanation:
You apply a force of 500 N to 150 N/m. how much does it stretch? Show the equation you are using, plus the values into the equation, and show the final answer with the units. 3 significant figures.
Answer:
3.33m
Explanation:
Given parameters:
Force applied =500N
Elastic constant = 150N/m
Unknown:
Amount of stretch or extension = ?
Solution:
To solve this problem use the expression below:
F = k e
F is the force applied
k is the elastic constant
e is the extension
So;
500 = 150 x e
e = [tex]\frac{500}{150}[/tex] = 3.33m
Consider the low-speed flight of a Space Shuttle as it is nearing a landing. If the air pressure and temperature at the nose of the shuttle are 1.05 atm and 300 K, respectively, calculate the density and specific volume. (Round the final answer to two decimal places.) The density is kg/m3. The specific volume is m3/kg.
Answer:
d = 1.24 kg/m³
v = 0.81 m³/kg
Explanation:
To do this, we need to analyze the given data and know the expressions we need to use here to do calculations.
We have a pressure of 1.05 atm and 300 K of temperature. To determine the density, we need to use a similar expression of an ideal gas. In this case, instead of using moles, we will use density:
P = dRT
d = P/RT (1)
Where:
R: universal constant of gases
d: density.
From here we can determine the specific volume by using the following expression:
v = 1/d (2)
Now, as we are looking for density, we need to convert the units of pressure in atm to Pascal (or N/m) and the conversion is the following:
P = 1.05 atm * 1.013x10⁵ N/m atm = 106,365 N/m
Now, using R as 287 the density would be:
d = 106,365 / (287 * 300)
d = 1.24 kg/m³Finally the specific volume:
v = 1 / 1.41
v = 0.81 m³/kgHope this helps
what is the acceleration of an object that has a mass of 10kg and is pushed with a force of 50 N. just answer this question with the number no unit
Answer:
a = 5 [m/s²]
Explanation:
We know from Newton's second law that the sum of forces on a body is equal to the product of mass by acceleration.
∑F = m*a
where:
F = total force = 50 [N]
m = mass = 10 [kg]
a = acceleration [m/s²]
Now replacing:
[tex]a = \frac{F}{m} \\a=50/10\\a = 5 [m/s^{2} ][/tex]
Now we’ll use the component method to add two vectors. We will use this technique extensively when we begin to consider how forces act upon an object. Vector A⃗ A→ has a magnitude of 50 cmcm and a direction of 30∘∘, and vector B⃗ B→ has a magnitude of 35 cmcm and a direction of 110∘∘. Both angles are measured counterclockwise from the positive xx axis. Use components to calculate the magnitude and direction of the vector sum (i.e., the resultant) R⃗ =A⃗ +B⃗ R→=A→+B→.
Answer:
The magnitude of the vector sum of A and B is 65.8 cm and its direction 61.6°
Explanation:
Since vector A has magnitude 50 cm and a direction of 30, its x - component is A' = 50cos30 = 43.3 cm and its y - component is A" = 50sin30 = 25.
Also, Since vector B has magnitude 35 cm and a direction of 110, its x - component is A' = 35cos110 = -11.97 cm and its y - component is A" = 35sin110 = 32.89 cm.
So, the vector sum R = A + B
The x-component of the vector sum is R' = A'+ B' = 43.3 cm + (-11.97 cm) = 43.3 cm - 11.97 cm = 31.33 cm
The y-component of the vector sum is R" = A"+ B" = 25 cm + 32.89 cm = 57.89 cm
So, the magnitude of R = √(R'² + R"²)
= √((31.33 cm)² + (57.89 cm)²)
= √(981.5689 cm² + 3,351.2521 cm²)
= √(4,332.821 cm²)
= 65.82 cm
≅ 65.8 cm
The direction of R is Ф = tan⁻¹(R"/R')
= tan⁻¹(57.89 cm/31.33 cm)
= tan⁻¹(1.84775)
= 61.58°
≅ 61.6°
So, the magnitude of the vector sum of A and B is 65.8 cm and its direction 61.6°
A remote controlled airplane moves 7.2 m in 2.5seconds what is the plane’s velocity
Answer:
2.88m/s
Explanation:
Given parameters:
Displacement = 7.2m
Time taken = 2.5s
Unknown:
Velocity of the plane = ?
Solution:
Velocity is the displacement divided by the time taken.
Velocity = [tex]\frac{displacement}{time taken}[/tex]
So;
Velocity = [tex]\frac{7.2}{2.5}[/tex] = 2.88m/s
which experimental result led to a revision of Thomas's plum pudding model of the atom?
A. electrons were found to have higher energy the farther they are from the nucleus
B. the beam in a cathode ray tube was moved by an electric force
C. A few alpha particles bounced off a thin sheet of gold foil
D. most alpha particles passed straight through a thin sheet of gold foil
Answer: C. A few alpha particles bounced off a thin sheet of gold foil.
A ball starts from rest and accelerates at 0.460 m/s2 while moving down an inclined plane 8.85 m long. When it reaches the bottom, the ball rolls up another plane, where, after moving 15.6 m, it comes to rest. What is the speed of the ball at the bottom of the first plane
Answer:
[tex]V=2.8534m/s \approx 3m/s[/tex]
Explanation:
From the question we are told that
Acceleration [tex]a=0.460m/s[/tex]
Distance traveled [tex]S_1=8.5m[/tex]
Distance traveled [tex]S_2=15.6m[/tex]
Generally the velocity of the ball at the bottom of the first plane V is mathematically given by
[tex]v^2=2as[/tex]
[tex]v=\sqrt{2as}[/tex]
[tex]V=\sqrt{2*0.460*8.85}[/tex]
[tex]V=2.8534m/s \approx 3m/s[/tex]
Imagine a third particle, which we will call a cyberon. It has three times the mass of an electron (3m). It has a positive charge that is three times the magnitude (3qe) of the charge on an electron. What is the ratio of the speed vc that the cyberon would have when it reaches the upper plate after being released from rest at position h0 to the speed ve that the electron would have
Answer:
Explanation:
Let the potential difference between plate be V .
Electrical energy lost for cyberon = V x 3e
Kinetic energy lost by cyberon = kinetic energy gain by it
V x 3e = 1/2 x 3m x vc²
For electron , the above equation becomes
V x e = 1/2 x m x ve²
Dividing the two equations
1 = vc² / ve²
vc = ve .
vc / ve = 1 .
What is the gravitational potential energy of 4.0 kg pinata suspended 2.5 meters above the ground
Answer:
100 or 95
Explanation:
GPE=M*GFS*change in height
GPE=4.0*10*2.5
=100
For the gravitational field strength you can use 10 or 9.5 but if it says specifically to use a certain value, than use that
As you are cycling to the Q center one spring day, you pass the construction site at Gant and stop to watch a few minutes. A crane holds bricks on a pallet to an upper floor of the building. Suddenly, a brick falls off the rising pallet. You clock the time it takes to hit the ground at 2.5 s. From how high did the brick fall?
Answer:
30.63 m
Explanation:
Using y = ut + 1/2gt² where u = initial speed of block = 0 m/s, g = acceleration due to gravity = 9.8 m/s² and t = time of fall = 2.5 s and y = height of fall.
So, substituting the values of the variables into the equation, we have
y = ut + 1/2gt²
y = 0 m/s × 2.5 s + 1/2 × 9.8 m/s² × (2.5 s)²
y = 0 m + 4.9 m/s² × 6.25 s²
y = 0 m + 30.625 m
y = 30.625 m
y ≅ 30.63 m
So, the brick fell 30.63 m
Tim has a house worth $250,000. He has installed a $100,000 aquarium in his basement because he is obsessed with fish. His regular homeowner's insurance doesn't cover home aquariums, so his insurance agent is writing a supplemental policy to help him get the coverage for the aquarium. What is this known as? Question 6 options: an exclusion a rider a deductible a consideration
Answer:
A rider.
Explanation:
A rider designates a clause or group of clauses added to an initial contract, being an annex to it. These added clauses are attached to the initial contract, integrating to it and losing the character of an independent document. Therefore, it would then be a piece of writing that is to be treated as part of the main contract. Usually, the purpose of the riders is to include particular clauses for the insured, that is, clauses that are specific to them outside of the company's generic contract.
Answer:
A rider, for plato users
Explanation:
Suppose that the estimate of the distance that the ball moves while a player is throwing it is 2.5 feet -- that is, the distance from where the ball is when the player starts their throw until it leaves their hand. Calculate the magnitude of the average acceleration in m/s2m/s2 that the ball has while it is being thrown, as it moves from rest to the point where it leaves the player's hand.
This question is incomplete. the complete question is;
a) Suppose that the estimate of the maximum height that a player can throw a baseball is 25 ft. For how long after the ball leaves the player's hand does it return to the players hand?
b) Suppose that the estimate of the distance that the ball moves while a player is throwing it is 2.5 feet -- that is, the distance from where the ball is when the player starts their throw until it leaves their hand. Calculate the magnitude of the average acceleration in m/s2m/s2 that the ball has while it is being thrown, as it moves from rest to the point where it leaves the player's hand.
Answer:
a) Total time of Flight is 2t is 2.49 seconds
b) The magnitude of the average acceleration is 98.03 m/s²
Explanation:
Given the data in the question;
a)
Maximum height [tex]h_{max}[/tex] = 25 ft = (25 /3.281) = 7.62 m
For how long after the ball leaves the player's hand does it return to the players hand;
[tex]h_{max}[/tex] = [tex]\frac{1}{2}[/tex]gt²
we know that g = 9.81 m/s²
so we substitute
7.62 m = [tex]\frac{1}{2}[/tex] × 9.81 m/s² × t²
7.62 m = 4.905m/s² × t²
t² = 7.62 m / 4.905
t² = 1.5535
t = √1.5535
t = 1.246 s
So total time of Flight is 2t = 2 × 1.246 s = 2.49 seconds
b)
given that
distance = 2.5 ft = ( 2.5 / 3.281) = 0.762 m
V = ?
from the First Equation of Motion
v = u + at
0 = u - 9.81 × 1.246 s
u = 12.2232 m/s
so from the Third Equation of Motion : v² = u² + 2as
(12.2232 m/s)² = 0² + 2 × a × 0.762 m
149.4066 = 1.524a
a = 149.4066 / 1.524
a = 98.03 m/s²
Therefore, the magnitude of the average acceleration is 98.03 m/s²
We should stress again that the Carnot engine does not exist in real life: It is a purely theoretical device, useful for understanding the limitations of heat engines. Real engines never operate on the Carnot cycle; their efficiency is hence lower than that of the Carnot engine. However, no attempts to build a Carnot engine are being made. Why is that
Answer:
The Carnot engine has zero power
Explanation:
Although theoretically the Carnot engine has more efficiency than the real engine. In practice however they tend to have zero power.
This is because all its processes are reversible (that is isothermic and adiabatic).
So the system equilibrates with its surroundings at every point in time. This makes work done very slow and the power generated is zero.
Carnot cycles requires attaining isothermal heat transfers which is quite difficult and take a long time. Also a pump that can handle liquid-vapour phase mixture will be required.
This is not practical.
I don’t even understand anyone help please.
Answer:
a) A:170572.5 J
C: 55794.9J
b) 170572.5 J
c) 41.4413265306m
d) 2.7455874717m/s
Explanation:
a) Kinetic energy = 0.5*m*v²
KE at A = 0.5*420*28.5² = 170572.5 J
KE at C = 0.5*420*16.3² = 55794.9 J
b) Mechanical energy is the total kinetic energy plus potential energy at a point on the system. There is no potential energy at A.
ANSWER: 170572.5 J
c) v²=u²+2as
28.5²=2(9.8)s
812.25/19.6=s
s=41.4413265306m
d) h=height from part c, r=radius of loop
v²=u²+2as
v²=gr or a=v²/r
Ei=Ef
mgh=0.5mv²+mg(2r)
gh=0.5v²+2gr
h=0.5r+2r
h=5/2r
r=2/5h=(2/5)(41.4413265306)=16.5765306122
F=ma
mg=m(v²/r)
g=v²/r
v²=(9.8)(16.5765306122)
v=√162.45
=12.7455874717m/s
A 1200 kg truck accelerates from 25 m/s to 53 m/s over a distance of 350 m.
What is the average net force on the truck?
Answer:
the average net force on the truck is 3744 N.
Explanation:
Given;
mass of the truck, m = 1200 kg
initial velocity of the truck, u = 25 m/s
final velocity of the truck, v = 53 m/s
distance traveled by the truck, d = 350 m
The acceleration of the truck is calculated as;
v² = u² + 2ad
53² = 25² + (2 x 350)a
700a = 53² - 25²
700a = 2184
a = 2184 / 700
a = 3.12 m/s²
The average net force on the truck is calculated as;
F = ma
F = 1200 x 3.12
F = 3744 N
Therefore, the average net force on the truck is 3744 N.
A 5-kg object is moving with a speed of 4 m/s at a height of 2 m. The potential energy of the object is approximately
J.
Answer:
P.E = 98 Joules
Explanation:
Given the following data;
Mass = 5kg
Speed = 4m/s
Height = 2m
We know that acceleration due to gravity is equal to 9.8m/s²
To find the potential energy;
Potential energy can be defined as an energy possessed by an object or body due to its position.
Mathematically, potential energy is given by the formula;
[tex] P.E = mgh[/tex]
Where, P.E represents potential energy measured in Joules.
m represents the mass of an object.
g represents acceleration due to gravity measured in meters per seconds square.
h represents the height measured in meters.
Substituting into the equation, we have;
[tex] P.E = 5*9.8*2[/tex]
P.E = 98 Joules
A 20.0-N weight slides down a rough inclined plane which makes an angle of 30 degree with the horizontal. The weight starts from rest and gains a speed of 15 m/s after sliding 150 m. How much work is done against friction
Answer:
[tex]1270.64\ \text{J}[/tex]
Explanation:
m = Mass of object = [tex]\dfrac{mg}{g}[/tex]
mg = Weight of object = 20 N
g = Acceleration due to gravity = [tex]9.81\ \text{m/s}^2[/tex]
v = Final velocity = 15 m/s
u = Initial velocity = 0
d = Distance moved by the object = 150 m
[tex]\theta[/tex] = Angle of slope = [tex]30^{\circ}[/tex]
f = Force of friction
fd = Work done against friction
The force balance of the system is
[tex]\dfrac{1}{2}m(v^2-u^2)=(mg\sin\theta-f)d\\\Rightarrow \dfrac{1}{2}mv^2=mg\sin\theta d-fd\\\Rightarrow fd=mg\sin\theta d-\dfrac{1}{2}mv^2\\\Rightarrow fd=20\times \sin 30^{\circ}\times 150-\dfrac{1}{2}\times \dfrac{20}{9.81}\times 15^2\\\Rightarrow fd=1270.64\ \text{J}[/tex]
The work done against friction is [tex]1270.64\ \text{J}[/tex].
A Geiger–Müller tube can be used to detect ionising radiation. The tube is filled with low pressure gas. How does this detect ionising radiation
Explanation:
the gas will be hit by high energy particles as the radioactive decay happens and the decaying nuclei are breaking apart. these particles energize the gas and cause electrons to move around the orbitals. the flow of electrons is detected by the sensor.
On a particular day the ocean swell has a period of 10 s, a wave velocity of 5.0 m/s, and a wave amplitude of 0.520 m. An anchored boat is bobbing up and down as the wave passes by. What is the peak vertical velocity of the boat
Answer:
the peak vertical velocity of the boat is 0.3267 m/s
Explanation:
Given that;
Time period T = 10 sec
wave velocity = 5.0 m/s
wave amplitude A = 0.520 m
peak vertical velocity of in the wave can be expressed as;
Vp = Aw
where w is angular frequency, ( w = 2π/T)
so
Vp = A × 2π/T
so we substitute
Vp = 0.520 × 2π/10
Vp = 3.2673 / 10
Vp = 0.3267 m/s
Therefore, the peak vertical velocity of the boat is 0.3267 m/s
What is physical education mean
Answer:
Ps eso me salio
Physical education, sports education or sports education are terms that refer to the teaching and learning of physical exercises whose main objective is education and health. This has been the decisive reason for the introduction of physical exercises in elementary school in the 19th century.
Explanation: