4. The chemical energy in the person's body is transformed into when they peddle the bike, causing the generator to rotate. Some energy in the bike wheel is lost to . The generator produces electricity, which heats the water, causing it to produce thermal energy in the form of steam. When the person's chemical energy runs out, how do you replenish it? 5. Change the initial energy source to sun, the intermediate energy source to the solar panel, and the final energy source to the windmill. In this system, is produced from the sun and transformed into electricity in the solar panel. Both of these types of energy are considered forms of . The result of this system is that the windmill produces mechanical energy. 6. Try a few more scenarios, choosing different initial, intermediate, and final energy sources. Observe places where energy is transformed and lost. Creating systems with the least amount of energy is important in engineering design.
Answer:
Mechanical Energy, Thermal Energy, By Feeding Them Food, Light Energy, Electromagnetic Energy, it's right on Edge
Explanation:
Answer:
1. mechanical energy, 2. thermal energy, 3. by feeding them food, 4. light energy 5. electromagnetic energy
Explanation:
got it right on edg ;))
How many significant figures are in the number 90027.00?
Answer:
Scientific Notation: 3.45 x 10^5
E Notation: 3.45e5
Explanation:
Charles's law describes the relationship of the volume and temperature of
gas at a constant mass and pressure. According to this law, what would
happen to the volume of the gas if its temperature increased from 150 K to
300 K?
A. The volume would increase from 150 mL to 300 mL.
B. The volume would be reduced by half.
C. The volume would decrease by 150 mL.
D. The volume would double.
Answer:
Charles's law is: When the pressure on a sample of a dry gas is held constant, the Kelvin temperature and the volume will be in direct proportion. So the volume would increase
Need a little help with this
Answer:
Lithium
Explanation:
As you go from left to right the atomic radius decreases.
As you go from top to bottom the atomic radius.
A. Carbon is farther right in the 2nd period.
B. Lithium is the first one in the 2nd period!
C. Neon is the farthest one on the right in the 2nd period.
D. Potassium is not even in the 2nd period
whats the melting point of water
3. How many moles are in 100. grams of nitrogen gas (N2)?
I NEED HELO ASAP PLEASE
Answer:
12 moles
Explanation:
How many atoms are in 200.0 grams of Sulfur (S)?
Answer:
37.64 × 10²³ atoms
Explanation:
Given data:
Number of atoms = ?
Mass of sulfur = 200.0 g
Solution:
First of all we will calculate the number of moles of sulfur.
Number of moles = mass/molar mass
Number of moles = 200.0 g/ 32 g/mol
Number of moles = 6.25 mol
Number of atoms:
Avogadro number:
It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance.
The number 6.022 × 10²³ is called Avogadro number.
1 mole = 6.022 × 10²³ atoms
6.25 mol × 6.022 × 10²³ atoms / 1mol
37.64 × 10²³ atoms
Is the following chemical equation balanced? 2Na + 2H20 - 2NaOH + H2 O yes
Hello KittyCat2004!
Reactants Products
Na = 2 atoms Na = 2 atoms
H = 4 atoms H = 4 atoms
O = 2 atoms O = 2 atoms
Because there are equal numbers of Na, H and O atoms on the reactant and product side, the chemical equation is balanced.
PLSS HELP I GIVE BRAINLIEST
Answer:
you r correct it is layer a and b
Explanation:
A photon has an energy of 4.0 x 10-19 Joules. What is the frequency of the radiation?
In the electromagnetic spectrum, the energy and frequency of radiation is given as, E=hυ where frequency is 0.603 ×10¹⁵ hertz.
What is electromagnetic spectrum?The electromagnetic radiation consists of waves made up of electromagnetic field which are capable of propogating through space and carry the radiant electromagnetic energy.
The radiation are composed of electromagnetic waves which are synchronized oscillations of electric and magnetic fields . They are created due to change which is periodic in electric as well as magnetic fields.
In vacuum ,all the electromagnetic waves travel at the same speed that is with the speed of air.The position of an electromagnetic wave in an electromagnetic spectrum is characterized by it's frequency or wavelength.They are emitted by electrically charged particles which undergo acceleration and subsequently interact with other charged particles.The relation is given as,E=hυ where on substitution υ =E/h=4×10[tex]^-19[/tex]/6.626×10[tex]^-34[/tex]=0.603×10¹⁵ hertz
Thus, frequency of radiation is 0.603 ×10¹⁵ hertz.
Learn more about electromagnetic spectrum,here:
https://brainly.com/question/23727978
#SPJ2
Earths rocks change from one type to another over time die to various earth processes A- igneous rock B- cementation C- metamorphic rock D- rock cycle
Answer:
The rock cycle describes the processes through which the three main rock types (igneous metamorphic, and sedimentary) transform from one type into another.
Calculate the number of atoms in 18.34 grams of sulfur. Answers in scientific notation
PLZ HELP!!
Answer:
The answer is 1.834 * 10
Explanation:
Your neighbor has a loud party at 3:00 A.M. The police tell her it is illegal to make noise at this late hour. This is an example of
o the government censoring your neighbor's first amendment freedoms
your neighbor legitimately exercising her first amendment rights
O restrictions on first amendment rights for the good of the community
the police abusing their power?
Uhm how to do this? I need answers to this please
Answer:
Hi - First you need to determine whether there is a metal or no and from there there are certain rules in order to name the compound. Here is a flowchart to try and help.
An adult dog has less inertia than a puppy.
True
False
Answer: True
Explanation: Hopes this helps- Lily ^_^
I think this is gonna be 2050 for memers
Answer:
HOLY WOAH
Explanation:
YES
A gas has a pressure
of 0.12 atm at 21.0°C.
What is the pressure at
standard temperature?
Answer:
0.12 it is 32.1 *C
Explanation:
at the standard temp
The pressure of the gas at 21°C is 1 atm. Then the pressure at the standard temperature i.e., at 25°C or 298 K is 0.14 atm.
According Gay- Lussacs law, the pressure of the gas is directly proportional to the temperature of the gas at constant volume.
hence, P1/T1 = P2/T2.
given,
P1 = 0.12 atm
T1= 21 °C
T2 = 25°C
then,
P2 = P1 T2/T1
= (0.12 atm ×21 °C)25 °C
= 0.14 atm
The pressure will increase from 0.12 atm to 0.14 atm when the temperature reaches its standard point.
Find more on Gay- Lussacs law:
https://brainly.com/question/1358307
#SPJ2
What is the overall trend for ionization energy on the periodic chart?
Answer:
The general trend is for ionization energy to increase moving from left to right across an element period. Moving left to right across a period, atomic radius decreases, so electrons are more attracted to the (closer) nucleus.
Explanation:
Brainliest plz
Answer:
Ionization energy increases across the period and decreases down the group.
(b) 28.2 yd to centimeters
Answer:
2578.608 centimeters in 28.2 yards.
Explanation:
There are 91.44 centimeters to a yard. Multiplying 91.44 by the number of yards, we get the number of centimeters per yards.
91.44(28.2) = 2578.608
Answer:
hruejhehee7 suhdbdudud d d
Explanation:
jejeij3j3n3jeij
what happend to that mass when the forest burns?
Answer:
When the forest burns we will lose a huge amount of oxygen and animals will lose their home.
Explanation:
If you have 2 moles of sugar molecules,
you will have how many sugar molecules?
Answer- im pretty sure it's 2
7. When substances are combined to form a mixture, they
A. keep their original properties
B. form new chemical bonds
C. form a new compound
D. cannot be separated physically
Answer: keep their original properties
Explanation: a mixture is, by definition, a combination of substances that do not interact, so they do not form new bonds/new compounds. They can usually be separated physically.
Mixtures are combinations of two or more individual components. However they can be separated physically based on their properties. They can form new bonds and compounds. Hence, options B and C are correct.
What are mixtures?Mixtures are formed by the combination of two or more substances by physical adherence or chemical bonds. They can be of homogeneous or heterogeneous.
Homogeneous mixtures appears as a single compound such as salt or sugar water they can form in one phase. Whereas, heterogeneous mixtures form two phases and appears to be separate.
There are many analytical tools to separate the components of mixtures such as chromatography, distillation, evaporation etc. The properties of mixtures will be different from that of the individual components. Hence, options B and C are correct.
To find more on mixtures, refer here:
https://brainly.com/question/24898889
#SPJ5
Do the following ! I'LL MARK THE BRAINLEST!
ITS SCIENCE!
Answer:
it's easier to look it up
Explanation:
You need to make an aqueous solution of 0.150 M sodium fluoride for an experiment in lab, using a 500 mL volumetric flask. How much solid sodium fluoride should you add?
Answer:
Explanation:
Solution required is .15 M 500 mL sodium fluoride .
molecular weight of sodium fluoride = 42
one mole of sodium fluoride = 42 grams
No of moles contained in the solution of .15M , 500 mL solution
= .15 x 0.5 moles = .075 moles
1 mole = 42 g
.075 moles = .075 x 42 = 3.15 grams .
So mass of sodium fluoride required = 3.15 g .
PLLLZZZZZZZZZZZZZZZ HELPPPPPP MEEEEEEEEEEEE THHHXXX
Complex animals use their circulatory systems to provide their cells with water and
food. Plants do not have circulatory systems. What have they developed instead to
move nutrients and water?
Answer:
It is Xylem!
Explanation:
I just now took the test in Eduphoria. Just trust me, and you will get this right. I promise!
It is through circulatory system through which tissues get required oxygen, nutrients and also helps to remove waste products. The plants move water and nutrients through Xylem.
What is Xylem?The vascular tissue which carries water and minerals from the soil to the leaves and stems is defined as the xylem. It is composed of some specialized cells called tracheary components which carry water.
There are two types of xylem, they are primary xylem and secondary xylem. The primary xylem is developed during the primary growth of the plant whereas the secondary xylem is formed during the secondary growth of the plant.
The most important function of xylem is to transport water and minerals from the roots of the plant to other parts of the plant. This transportation occurs by passive transport which does not require any external energy.
The materials which flow through the xylem cell is called the xylem sap.
Thus xylem helps plants to move nutrients and water.
To know more about xylem, visit;
https://brainly.com/question/15918718
#SPJ6
Base changes phenolphthalein to pink it is true or false
Answer:
It’s false
Explanation:
it could be true if the question mentioned alkaline solution
Answer:
True
Explanation:
Phenolphthalein is colorless in the presence of an acid and turns pink in the presence of a base.
Can y’all answer these for me I’m in a hurry so I don’t fail this class
Answer:
what I can't understand what you're saying lol
Explanation:
be my friend lol
btw follow me on my another account (sarivigakarthi)...... plz
Explain how the earth recycles and reuses it's own crust (Make it a paragraph)
Answer:
The interaction between the tectonic and the hydrologic systems causes constant recycling of the materials of the Earth's crust. Rocks are heated, metamorphosed, melted, weathered, sediment is transported, deposited and lithified, then it may be metamorphosed again in yet another cycle.
Explanation:
how is energy transfered from one piece of metal to another
Answer:
The positive and negative electrons attract leaving a shock and heat travels faster through metal than any other material such as plastic, wood, etc.
Explanation:
Answer:
The electrons in a piece of metal can leave their atoms and move about in the metal as free electrons. ... The hotter the metal, the more kinetic energy these vibrations have. This kinetic energy is transferred from hot parts of the metal to cooler parts by the free electrons.
Explanation: