There exist infinitely many maximum flows if there exist two distinct maximum flows f₁ and f₂.
How can the existence of two distinct maximum flows lead to the existence of infinitely many maximum flows?Suppose there exist two distinct maximum flows f₁ and f₂. By definition, the maximum flow is the largest possible flow in a network from the source to the sink. If f₁ and f₂ are both maximum flows, it means that they are both the largest possible flows in the network. However, since they are distinct, there must be at least one edge with a different flow value between the two flows.
Let's call this edge e. We can then construct a new flow f₃ by taking flow f₁ and subtracting the flow on edge e and adding the same amount of flow to flow f₂ on edge e. This results in a new flow that is also maximum since it has the same value as both f₁ and f₂.
But we can repeat this process for any other edge where f₁ and f₂ differ, resulting in a new maximum flow each time. Therefore, there are infinitely many maximum flows that can be constructed from f₁ and f₂.
Learn more about Maximum flows
brainly.com/question/22716530
#SPJ11
An error in a program that results in the program outputting $100 instead of the correct answer, $250 is A) a programmer error B) a syntax error C) a run-time error D) a logical error E) a snafu
An error in a program that results in the program outputting $100 instead of the correct answer, $250 is a D) logical error.
This is because the program is producing an incorrect output due to an error in the logic or algorithm used in the program, rather than a syntax error (which would involve incorrect code syntax), a run-time error (which would involve an error that occurs during program execution), or a programmer error (which would involve an error made by the programmer during the development process). A snafu is a slang term for a chaotic or confused situation, and may not be directly related to programming errors or issues with program output.A logic error is an error in a program's source code that gives way to unanticipated and erroneous behavior. A logic error is classified as a type of runtime error that can result in a program producing an incorrect output. It can also cause the program to crash when running.
learn more about logical error here:
https://brainly.com/question/28957248
#SPJ11
16. It is a good programming practice to ____________ your functions by writing comments that describe what they do.a. executeb. documentc. eliminated. prototypee. None of these
The answer is "b. document". It is a good programming practice to document your functions by writing comments that describe what they do.
This helps other programmers who may use or modify your code understand how your functions work and how to use them. Documenting your functions also helps you remember what your code does, especially if you come back to it months or years later. Good documentation can make your code more usable, maintainable, and understandable, and can help prevent errors and bugs. Therefore, it is important to make a habit of documenting your code and keeping your comments up to date.
learn more about code here:
https://brainly.com/question/17204194
#SPJ11
A search algorithm
arranges elements in ascending order.
arranges elements in descending order.
is used to locate a specific item in a larger collection of data.
is rarely used with arrays.
A search algorithm is used to locate a specific item in a larger collection of data. It can arrange elements in either ascending or descending order, depending on the specific algorithm implemented. However, search algorithms are less commonly used with arrays as other data structures may be more suitable for certain tasks.
A search algorithm is a set of instructions that is used to find a specific item in a larger collection of data. One type of search algorithm arranges elements in ascending order, meaning that it starts with the smallest value and works its way up to the largest value. Another type of search algorithm arranges elements in descending order, meaning that it starts with the largest value and works its way down to the smallest value. However, it is important to note that arranging elements in descending order is not always necessary or efficient for locating a specific item. Additionally, while search algorithms can be used with various types of data structures, they are rarely used with arrays as arrays are already organized in a specific order.
learn more about search algorithm here:
https://brainly.com/question/20734425
#SPJ11
a new user in your organization is just starting to use linux with the gnome desktop. she has opened a window, but is unsure of how to close it. what should she do?
To close a window in the GNOME desktop environment on Linux, the user can click the "X" icon in the top right corner of the window or use the keyboard shortcut Alt + F4.
In the GNOME desktop environment on Linux, the "X" icon in the top right corner of a window is the standard way to close it. Alternatively, the user can use the keyboard shortcut Alt + F4 to close the active window. If the user wants to close a specific tab within a window (such as in a web browser), they can click the "X" icon on that tab. If the user is still having trouble closing a window, they can try right-clicking the window's title bar to access additional options, such as "Close" or "Quit."
Learn more about GNOME here;
https://brainly.com/question/30064021
#SPJ11
If the instruction is SW, then ALUOp should be _____.
00
01
10
unknown
If the instruction is SW, then ALUOp should be 010.000110 unknown.
This is because SW (store word) is a memory operation that stores the contents of a register into memory. The register's value is first calculated using an ALU operation, which is specified by the ALUOp field in the instruction. In this case, the ALUOp value of 010 indicates that the ALU should calculate the memory address by adding the value in the register specified by the Rs field to the immediate value in the instruction's offset field.
After the memory address is calculated, the contents of the register specified by the Rt field are stored into memory at that address. The unknown field in the ALUOp value can be ignored for this instruction, as it is not used in the SW operation. It is important to ensure that the correct ALUOp value is set for each instruction, as it determines the type of operation that will be performed by the ALU and ensures that the instruction is executed correctly.
Learn more about ALUOp here: https://brainly.com/question/19165673
#SPJ11
47. T F When a function is declared a friend by a class, it becomes a member of that class.
False. When a function is declared a friend by a class, it does not become a member of that class. Instead, it gains access to the private and protected members of that class, while remaining an external function.
A function is defined as a relation between a set of inputs having one output each. In simple words, a function is a relationship between inputs where each input is related to exactly one output. Every function has a domain and codomain or range. A function is generally denoted by f(x) where x is the input. The general representation of a function is y = f(x).
These functions are also classified into various types, which we will discuss here. Check Relations and Functions lesson for more information.here are several types of functions in maths. Some important types are:
Injective function or One to one function: When there is mapping for a range for each domain between two sets.
Surjective functions or Onto function: When there is more than one element mapped from domain to range.
Polynomial function: The function which consists of polynomials.
Inverse Functions: The function which can invert another function.
learn more about function here:
https://brainly.com/question/12431044
#SPJ11
A firewall will drop a packet if it ________. A firewall will drop a packet if it ________. is a definite attack packet neither A nor B both A and B is a highly probable attack packet
A firewall will drop a packet if it is a definite attack packet. Option a is answer.
A firewall is a network security device that monitors and filters incoming and outgoing network traffic based on predefined security rules. When a packet is flagged as a definite attack packet, it means that it matches a known pattern or signature of a malicious or unauthorized activity. In such cases, the firewall takes action to protect the network by dropping or discarding the packet, preventing it from reaching its intended destination.
This helps to mitigate potential security threats and reduce the risk of unauthorized access or damage to the network. By identifying and dropping definite attack packets, firewalls play a crucial role in maintaining network security and protecting against various types of cyber attacks.
Option a is answer.
You can learn more about attack packet at
https://brainly.com/question/31813370
#SPJ11
dlp can be used to identify sensitive files in a file system and then embed the organization's security policy within the file. T/F
False. DLP identifies sensitive files and applies security policies, not embeds.
Can DLP identify and protect?The statement is false.
DLP (Data Loss Prevention) can be used to identify sensitive files in a file system and apply security policies to them. However, embedding the organization's security policy within the file is not a typical use case for DLP. Security policies are usually defined and enforced at the system or network level, not at the file level.
Steps for using DLP to identify sensitive files and apply security policies:
Identify the types of sensitive data that need to be protected (e.g., financial data, personally identifiable information).Configure the DLP system to scan the file system for files that contain sensitive data.Once the sensitive files are identified, apply security policies to them. This may include encrypting the files, restricting access to them, or monitoring their usage.Monitor the system to ensure that the security policies are being enforced and adjust the policies as necessary to address new threats or changes in the organization's data protection requirements.Learn more about DLP
brainly.com/question/31723348
#SPJ11
The _______________ is a layer of software that allows Windows to run on different hardware platforms.
The Hardware Abstraction Layer (HAL) is a layer of software that allows Windows to run on different hardware platforms by abstracting hardware dependencies.
The Hardware Abstraction Layer (HAL) is a component of the Windows operating system that sits between the hardware and the operating system kernel. Its primary function is to abstract the differences between hardware platforms and provide a consistent interface for the operating system to interact with the hardware. This means that the same copy of Windows can be installed on different types of computers with different hardware components, and the HAL will translate the operating system's requests into commands that are understood by the specific hardware. Without the HAL, the operating system would have to be customized for each hardware configuration, making it much less portable.
Learn more about software that allows Windows here.
https://brainly.com/question/14831059
#SPJ11
With the client entry form in form view, use the find tool to find the first record with Detroit in the city field
To find the first record with Detroit in the city field on the client entry form in form view, you can use the find tool. The find tool is located in the ribbon at the top of the form view. Once you click on the find tool, a search box will appear where you can type in the search criteria.
In this case, you would type in "Detroit" in the search box and press enter. The form will then automatically scroll to the first record that matches the search criteria.It's important to note that the find tool searches for the exact match of the search criteria in the current field being viewed. So if you have multiple fields on the form, you need to make sure you are viewing the city field before using the find tool. Additionally, if there are multiple records that match the search criteria, the find tool will find the first one it encounters and stop searching. If you want to find all the records that match the search criteria, you need to use a filter or query to search the entire database.Overall, the find tool is a quick and easy way to locate specific records on a form in form view. It can save you time and effort by eliminating the need to scroll through a large number of records manually.For such more question on criteria
https://brainly.com/question/1788910
#SPJ11
What magnification is best for veiwing a spicimen to see a wider field?
To see a wider field when viewing a specimen, a lower magnification is best. This allows you to see a larger area of the specimen at once. Higher magnifications will zoom in closer and show more detail, but will also limit the amount of the specimen you can see at one time.
Therefore, a magnification of 10-20x would be ideal for viewing a specimen with a wider field.
To view a specimen with a wider field, you should use a lower magnification. Lower magnification provides a larger field of view, allowing you to see more of the specimen at once.
Higher magnification, on the other hand, provides more detail but a smaller field of view. In most microscopes, a 4x or 10x objective lens is suitable for observing a specimen with a wider field of view.
Learn more about magnification here:- brainly.com/question/21370207
#SPJ11
"Those early customers for a disruptive technology are part of a different ________ than what was addressed by incumbent market leaders. A.Value chain B.value networkC.market segment D.customer segment"
"Those early customers for a disruptive technology are part of a different customer segment than what was addressed by incumbent market leaders." Option d is answer.
Early customers of a disruptive technology often have different needs, preferences, and behaviors than the mainstream customers targeted by incumbent market leaders. These early customers may be more willing to take risks, more open to experimentation, and more interested in novel features and capabilities than the average customer in the market.
As a result, they may be overlooked or dismissed by incumbent market leaders, who are focused on serving the needs of their existing customer base. However, these early customers can be an important source of learning and feedback for disruptive technology firms, and can help to establish a foothold in the market that can be leveraged over time to gain wider acceptance and adoption.
Option d is answer.
You can learn more about disruptive technology at
https://brainly.com/question/29215363
#SPJ11
When the lock is released, which thread in the waiting queue gets the lock
When a lock is released, the thread at the head of the waiting queue typically gets the lock.
This thread is usually the first thread that requested the lock and was unable to acquire it because it was already held by another thread. When a thread tries to acquire a lock that is already held by another thread, it is blocked and added to the waiting queue for that lock. The waiting queue is typically implemented as a FIFO (first-in, first-out) queue, meaning that the first thread that was added to the queue is the first one that will be given the lock when it is released.
Once the lock is released by the thread that currently holds it, the operating system or the lock implementation will typically wake up the thread at the head of the waiting queue and give it the lock. This thread can then proceed to execute the critical section protected by the lock.
You can learn more about thread at
https://brainly.com/question/15028286
#SPJ11
If the instruction is OR, then as well as examining the ALUOp bits, the ALU control will also examine _____.
Instruction[31:26] (the leftmost bits)
Instruction[5:0] (the rightmost bits)
If the instruction is OR, then as well as examining the ALUOp bits, the ALU control will also examine Instruction[5:0] (the rightmost bits).
The ALU control examines the opcode of the instruction to determine the operation to be performed by the ALU. In the case of the OR instruction, it needs to examine the opcode as well as the function code, which is located in the rightmost bits of the instruction (bits 5-0). The function code specifies the specific variant of the OR operation to be performed, such as bitwise OR or logical OR. By examining these bits, the ALU control can properly configure the ALU to perform the correct operation as specified by the instruction.
learn more about ALU here:
https://brainly.com/question/14247175
#SPJ11
Nonlinear editing uses digital equipment to rearrange scenes to make the master copy. a. True b. False
The statement "Nonlinear editing uses digital equipment to rearrange scenes to make the master copy" is true.
Nonlinear editing is a digital video editing technique that allows for the rearrangement, modification, and combination of video and audio clips in a non-sequential, or non-linear, manner. This means that video and audio clips can be edited out of sequence and rearranged to create a finished product.
Nonlinear editing is accomplished using digital equipment, typically using specialized software designed for video editing. The edited footage is saved as a new file, called the master copy, which can be further edited, exported, and shared in various formats. Nonlinear editing is widely used in film and video production, as it offers a high degree of flexibility and creative control over the final product.
Learn more about software here:
https://brainly.com/question/985406
#SPJ11
The statement "Nonlinear editing uses digital equipment to rearrange scenes to make the master copy" is true.
Nonlinear editing is a digital video editing technique that allows for the rearrangement, modification, and combination of video and audio clips in a non-sequential, or non-linear, manner. This means that video and audio clips can be edited out of sequence and rearranged to create a finished product.
Nonlinear editing is accomplished using digital equipment, typically using specialized software designed for video editing. The edited footage is saved as a new file, called the master copy, which can be further edited, exported, and shared in various formats. Nonlinear editing is widely used in film and video production, as it offers a high degree of flexibility and creative control over the final product.
Learn more about software here:
brainly.com/question/985406
#SPJ11
Explore all similar answers
0.0
(0 votes)
Add comment
Advertisement
mike is an ethical hacker hired as a consultant to test the security of a mid-sized company's network. as part of his assignment, he has been given physical access to the system. he has built a dictionary of hashed passwords from the hard drive of the device. which type of attack is he planning to launch?
As an ethical hacker, it would be unethical for Mike to launch any type of attack using the dictionary of hashed passwords he obtained from the system.
His role is to identify vulnerabilities and make recommendations for improving the security of the network, not to launch attacks. If he were to use the dictionary to launch an attack, it would be considered a malicious and unethical action.Based on the information provided, Mike is likely planning to launch a password cracking attack using a dictionary attack. A dictionary attack involves using a list of words or commonly used passwords to try and guess a user's password by hashing each word or password in the list and comparing it to the hashed passwords on the device.
To learn more about ethical click the link below:
brainly.com/question/30192518
#SPJ11
In the call MPI_Reduce(a, z, n, MPI_DOUBLE, MPI_SUM, 8, MPI_COMM_WORLD), the result is written into the "a" array.True or False
False. The "z" array receives the output. The "a" array holds the local data for each process, and "z" will hold the result of the reduced operation after MPI_Reduce is finished.
Data from various processes can be combined into a single result using MPI's MPI_Reduce procedure. The local data for each operation is contained in the "a" array in this scenario, while the final reduced result is contained in the "z" array. The action indicated in this call is a summation operation (MPI_SUM), which implies that the values in "a" will be added up across all processes, and the total will then be written into "z" on the designated root process (rank 8 in this example). Data from numerous processes can be combined into one result using MPI's MPI_Reduce procedure. The local data for each process in this instance is contained in the "a" array, while the final reduced result is contained in the "z" array.
learn more about local data here:
https://brainly.com/question/29359095
#SPJ11
The statement or block of statements following the while clause is known as the ____________ of the loop.
a. assembly
b. body
c. definition
d. sequence structure
The statement or block of statements following the while clause is known as the body of the loop.
Your answer: b. body
In computer programming, a "block of statements" following the while clause refers to a set of one or more instructions or statements that are executed repeatedly while a certain condition is true. The while clause is a type of control structure used in programming languages to implement loops.
In this syntax, the condition is a boolean expression that is evaluated at the beginning of each iteration of the loop. If the condition is true, the block of statements within the braces {} is executed. After the block of statements is executed, the condition is evaluated again. If it is still true, the block of statements is executed again, and this process repeats until the condition becomes false.
The block of statements following the while clause can include any valid instructions or statements in the programming language. These statements can be simple, such as assigning a value to a variable, or complex, such as calling a function or executing a series of conditional statements.
To learn more about Statement Here:
https://brainly.com/question/18591190
#SPJ11
ava is a network engineer. she is writing a proposal to her company's chief information office (cio) about the deployment of a group of end-user nodes to replace the office's aging workstations. her solution is to use pcs with only display screens, keyboards, and mice, with all of the computing work and storage hosted on servers. what is her solution?
Ava's solution is to deploy a group of end-user nodes that will replace the office's aging workstations. These nodes will be PCs with only display screens, keyboards, and mice, with all of the computing work and storage hosted on servers.
Ava believes that this solution will improve the efficiency of the office's computing work and reduce the burden of content loaded on individual workstations. She is proposing this solution to the company's chief information office (CIO) for approval.
Ava, as a network engineer, is proposing a solution to the company's Chief Information Officer (CIO) that involves deploying end-user nodes, also known as thin clients, to replace the office's aging workstations. These thin clients consist of only display screens, keyboards, and mice, with all computing work and storage being managed and hosted on centralized servers.
To learn more about End-userr Here:
https://brainly.com/question/13067602
#SPJ11
"Blackflow Device" is a term used to describe a device that?
a. connects three inlet lines with one outlet line
b. lets air into valve vaults
c. prevents backflow of potentially contaminated source into drinking water d. prevents backflow of water through an out-of-service pump
"Backflow Device" is a term used to describe a device that prevents the reverse flow of potentially contaminated water or other fluids from flowing back into a drinking water system.
Backflow can occur when there is a drop in pressure in a plumbing system, causing fluids to flow in the opposite direction of their intended flow. This can create a risk of contamination if the fluids flowing back into the system are from a potentially contaminated source, such as a chemical tank, irrigation system, or swimming pool. A backflow device, also known as a backflow preventer, is designed to prevent this from happening by allowing water to flow in only one direction. It is typically installed at the point where the plumbing system connects to a public water supply or other potable water sources. Backflow devices can be required by local or national plumbing codes and may need to be inspected and tested periodically to ensure they are functioning properly. In summary, a backflow device is a device that prevents the reverse flow of potentially contaminated water or other fluids from flowing back into a drinking water system. It is typically required by plumbing codes and is designed to ensure the safety and quality of the drinking water supply.
Learn more about Backflow Device here:
https://brainly.com/question/31481844
#SPJ11
To boot from a network installation, if there is no Preboot Execution Environment (PXE), _______________.A.create boot media that forces booting from network locationB.use a different installation diskC.enter BIOS System SetUp and enable PXED.find a server with a PXE
C. Enter BIOS System SetUp and enable PXE. To boot from a network installation, if there is no Preboot Execution Environment (PXE), Enter BIOS System SetUp and enable PXE.
PXE (Preboot Execution Environment) is a standard protocol used to boot a computer from a network location. If a computer does not have PXE enabled by default, the user can access the BIOS System SetUp and enable it from there. This will allow the computer to search for a network location to boot from during the boot process. This option may be particularly useful in corporate environments where network installations are common. However, it's important to note that enabling PXE may require specific network settings and configurations, so it's recommended to consult with an IT professional before attempting this method.
learn more about network here:
https://brainly.com/question/30882158
#SPJ11
3. A static member variable is declared in a class. Where is the static member variable defined?
A static member variable is declared in the class definition, but it must be defined outside of the class, typically in a source file, to allocate memory for the variable. This is done using the class name followed by the scope resolution operator and the variable name. For example, if the static member variable is named "count" in a class named "MyClass", it would be defined as "int MyClass::count = 0;".
A static member variable is declared and defined within a class, but its memory allocation occurs at a separate location known as the global data area or static storage area. Since it is shared among all instances of the class, it only exists once for the entire lifetime of the program. Here's a step-by-step explanation:
1. Declare the static member variable inside the class using the "static" keyword.
2. Define the static member variable outside the class, in the global scope.
3. Access the static member variable using the class name and the scope resolution operator (::).
Learn more about static member variable from : brainly.com/question/14863955
#SPJ11
35. Look at the following function prototype.int myFunction(double, double, double); How many parameter variables does this function have?a. 1b. 2c. 3d. Can't tell from the prototype
The function prototype for myFunction is int myFunction(double, double, double). This function has 3 parameter variables, all of which are of the double data type. So, the correct answer is:c. 3
Certainly! A function prototype is a declaration of a function that specifies its name, return type, and parameter types. In this case, the function name is myFunction, the return type is int, and it takes three parameters, all of which are of type double. The names of the parameters are not specified in the function prototype, only their types.
Learn more about declaration here
https://brainly.in/question/30120803
#SPJ11
With top-down design, which function in your design must you implement first?
a) The topmost function.
b) a function in the middle.
c) One of the functions at the bottom.
d) It doesn't matter which one you implement first.
With top-down design, you must implement the topmost function in your design first. This is because the topmost function represents the main objective of the program and all other functions are built upon it.
By starting with the topmost function, you can ensure that the overall structure of the program is sound before moving on to the smaller, more specific functions lower down in the hierarchy.
Top-down design, also known as top-down programming or top-down approach, is a design methodology used in software development that starts with defining the high-level structure and functionality of a system or application before proceeding to lower-level details. In top-down design, the overall system architecture, flow of control, and major components are first conceptualized, and then the design is progressively refined and detailed at lower levels of abstraction.
To learn more about Top-down design Here:
https://brainly.com/question/31539558
#SPJ11
Iggy uses his computer to break into Hye Technology Company's computer. Iggy isa. a hackerb. a botc. a botnetd. a worm
Iggy is a hacker. A hacker is a person who uses their technical expertise to gain unauthorized access to computer systems or networks. In this scenario, Iggy uses his computer to break into Hye Technology Company's computer, which is a clear example of hacking.
Hackers may use a variety of techniques to gain access to systems, including social engineering, exploiting vulnerabilities in software, and using malicious code such as viruses or trojans. The motivations for hacking can vary widely, from seeking financial gain to political activism or personal gratification. Hacking can have serious consequences, including theft of sensitive information, disruption of services, and damage to reputations and relationships. It is important to take measures to secure computer systems and networks against potential threats, including implementing strong passwords, keeping software up-to-date, and monitoring for suspicious activity.
Learn more about hacker here;
https://brainly.com/question/29215738
#SPJ11
When would a switch record multiple entries for a single switch port in its MAC address table?
A switch may record multiple entries for a single switch port in its MAC address table in the following scenarios:
Multiple devices are connected to the same switch port: If a hub or switch is connected to a switch port, and multiple devices are connected to that hub or switch, then the switch will learn the MAC addresses of all those devices and record them against the same switch port in its MAC address table.
Virtual local area network (VLAN) tagging: If VLAN tagging is enabled on the switch port, then the switch may learn multiple MAC addresses associated with different VLANs on the same switch port.
Port channeling or link aggregation: If multiple physical links are aggregated into a single logical link using link aggregation or port channeling, then the switch may learn multiple MAC addresses associated with that logical link, and record them against the same switch port in its MAC address table.
In all these cases, the switch maintains separate entries for each MAC address learned on the same switch port, and uses this information to forward traffic to the appropriate destination.
alex is an it consultant. he is given the specifications of a networking project for the new campus of a multi-national corporation. among the requirements, switches and wireless access points (waps) must interconnect all nodes, the network must use hardware firewalls, and it must support single sign-on (sso). which network infrastructure does he select that fulfills these requirements?
To fulfill the requirements for the networking project of the multi-national corporation's new campus, Alex should select a network infrastructure that incorporates the following components:
1. Switches: These devices connect all nodes in the network and enable efficient data transfer between them.
2. Wireless Access Points (WAPs): WAPs provide wireless connectivity for devices, expanding the network's reach beyond wired connections.
3. Hardware Firewalls: These security devices protect the corporation's network by filtering incoming and outgoing traffic based on predefined rules.
4. Single Sign-On (SSO): This authentication process allows users to access multiple applications and services with a single set of credentials, simplifying user management and improving security.
By implementing a network infrastructure with these elements, Alex can meet the specified requirements for the corporation's new campus.
To learn more about networking click the link below:
brainly.com/question/29979115
#SPJ11
True or false? It's not a good policy to delete all negative comments.
The statement is true because negative feedback can provide valuable insights into areas for improvement and help a business address issues that may be impacting customer satisfaction and it is not a good policy,
Allowing negative feedback to remain visible on a business's online platforms can help the business understand areas where it needs to improve. For example, if a customer complains about a product being faulty, the business can take steps to address the issue and prevent similar complaints in the future.
Ignoring or deleting negative feedback can also damage a business's reputation, as it can create the perception that the business is not willing to listen to its customers or address their concerns.
Learn more about policy https://brainly.com/question/2885300
#SPJ11
The answer is TRUE, it's not always a good policy to delete all negative comments. They can serve as valuable feedback, increase credibility of positive reviews, and provide opportunities to exhibit good customer service. However, inappropriate comments should be deleted.
Explanation:Understanding the context of internet communications, the answer is TRUE, it's not necessarily a good policy to delete all negative comments. Negative comments can serve as valuable feedback for improvement for businesses or individuals. Moreover, the presence of some negative comments can actually improve the credibility of positive reviews. Also, they provide an opportunity to demonstrate excellent customer service by responding to and addressing those comments in a constructive manner. Hence, as a general rule, it's not a good policy to delete all negative comments. However, comments that are defamatory, abusive, or inappropriate in nature should indeed be deleted to maintain a positive and respectful environment.
Learn more about Online Reviews Management here:https://brainly.com/question/33551206
windows 10 on start up the background screen comes up but just flashes a white screen and nothing startsT/F
It seems like you are experiencing an issue with your Windows 10 operating system.
When you start up your computer, the background screen appears but quickly flashes a white screen and nothing else happens.
This issue could be caused by a variety of factors, such as outdated drivers, corrupted system files, or incompatible software.
To troubleshoot this issue, you can try restarting your computer in Safe Mode, running a system scan for viruses or malware, updating your drivers and software, or performing a system restore to a previous point in time when your computer was functioning normally.
If these solutions do not work, you may need to seek further technical assistance or consider reinstalling your operating system.
Your question is incomplete but most probably your full question was:
Windows 10 on start up the background screen comes up but just flashes a white screen and nothing starts. What should you do?
Learn more about Windows 10 at
https://brainly.com/question/29841019
#SPJ11
True/False: When fully utilized, a multicore CPU is typically more energy efficient than a high-end GPU.
True, when fully utilized, a multicore CPU is typically more energy efficient than a high-end GPU.A multicore CPU (Central Processing Unit) is a type of CPU that has multiple processing cores, or individual processing units, within a single physical chip.
Each processing core in a multicore CPU is capable of executing instructions and performing calculations independently, which allows for parallel processing and increased overall computing performance.
Multicore CPUs have become the standard in modern computing devices, including desktop computers, laptops, servers, and mobile devices, due to their ability to handle multiple tasks simultaneously and improve overall system performance.
It's worth noting that the performance of a multicore CPU depends not only on the number of cores but also on other factors such as clock speed, cache size, architecture, and memory subsystem. Properly optimizing software for multicore CPUs, taking into account factors such as load balancing, thread synchronization, and task distribution, is also important to fully utilize the potential of multicore CPUs and achieve optimal performance in multithreaded applications.
To learn more about CPU Here:
https://brainly.com/question/30751834
#SPJ11