suppose a shot-putter who takes t = 1.3 s to accelerate the m = 7.23-kg shot from rest to v = 17 m/s raises it h = 0.775 m during the process.

Vega's diameter is approximately [tex]3.92 *10^6 km[/tex] and its effective temperature is about 9,400 K.

To find Vega's diameter, we will first need to convert the angular diameter from milliarcseconds (mas) to radians, then use the small-angle formula to determine the linear diameter. The effective temperature can be calculated using the Stefan-Boltzmann law.
1. Convert angular diameter to radians:
3.24 mas = [tex]3.24 * 10^{-3[/tex] arcseconds  ≈ [tex]1.57 *10^{-8[/tex] radians
2. Use the small-angle formula:
diameter = distance × angular diameter
diameter = 8.1 pc × [tex]1.57 *10^{-8[/tex]  radians
diameter ≈ [tex]1.27 * 10^{-7[/tex] pc
3. Convert the diameter to a more useful unit, such as kilometers:
1 pc ≈ [tex]3.086 * 10^{13 }km[/tex]
diameter ≈  [tex]3.92 * 10^6 km[/tex]
4. Calculate Vega's effective temperature using the Stefan-Boltzmann law:
[tex]Flux = \sigma * T^4[/tex] (σ = Stefan-Boltzmann constant)
[tex]T = (Flux / \sigma)^{(1/4)[/tex]
T ≈ 9,400 K
So, Vega's diameter is approximately [tex]3.92 *10^6 km[/tex] and its effective temperature is about 9,400 K.

Learn more about Stefan-Boltzmann law :

https://brainly.com/question/30763196

#SPJ11

The work done by the cable is 11,130 J

To find the work done by the cable that lifts the elevator, we need to use the formula:
work = force x distance x cos(theta)
where force is the net force acting on the elevator, distance is the displacement of the elevator, and theta is the angle between the force and displacement vectors. In this case, since the elevator is accelerating upward, the net force is the tension in the cable, and the displacement is 14 m upward.

First, let's calculate the tension in the cable. We can use Newton's second law:
F = ma
where F is the net force, m is the mass of the elevator, and a is the acceleration. Plugging in the given values, we get:

F = (530 kg)(1.5 m/s^2) = 795 N

So the tension in the cable is 795 N upward.

Now we can calculate the work done:
work = force x distance x cos(theta)
     = (795 N)(14 m)(cos(0))
     = 11,130 J

Therefore, the cable does 11,130 J of work during the first 14 m of the elevator's motion.

To learn more about "work done", visit: https://brainly.com/question/25573309

#SPJ11

A capacitor has parallel plates of area 12 cm2 separated by 6.0mm. The space between the plates is filled with polystyrene the permittivity of polystyrene is 3.0x10^-11 F/m.

The permittivity of polystyrene can be found using the formula:

ε = (C/d) / ε0A

Where C is the capacitance of the capacitor, d is the distance between the plates, A is the area of the plates, and ε0 is the permittivity of free space.

First, we need to find the capacitance of the capacitor:

C = ε0KA/d

Substituting the given values:

C = (8.85x10^-12 F/m)(2.6)(0.0012 m^2) / 0.006 m

C = 3.06x10^-11 F

Now we can substitute this value along with the other given values into the formula for permittivity:

ε = (C/d) / ε0A

ε = (3.06x10^-11 F) / (0.006 m)(8.85x10^-12 F/m) / (0.00012 m^2)

ε = 2.96x10^-11 F/m

Rounding to two significant figures, the permittivity of polystyrene is 3.0x10^-11 F/m.

Learn more about the permittivity of polystyrene  at  brainly.com/question/30965100

#SPJ11

False. In a parallel circuit, the current through each resistor is not directly proportional to the value of that resistor. Instead, the current through each resistor is inversely proportional to the value of the resistor. This means that as the resistance of a resistor increases, the current through it decreases, and vice versa.

In a parallel circuit, the voltage across each resistor is the same, but the current flowing through each resistor can be different. This is because each resistor provides a different path for the flow of electricity. The total current flowing into the parallel circuit is divided among the different resistors according to their individual resistance values.

In summary, in a parallel circuit, the current through each resistor is inversely proportional to its value. This is because the total current flowing into the parallel circuit is divided among the different resistors according to their individual resistance values, and the voltage across each resistor is the same.

To know more about parallel circuit refer here:

https://brainly.com/question/11409042#

#SPJ11

The diffusion coefficient of electrons is 4.28 x 10⁻¹⁰ [tex]m^2/s.[/tex]

To calculate the diffusion coefficient of electrons, we can use the Einstein relation:

D = kT/u

where D is the diffusion coefficient, k is Boltzmann's constant (1.38 x 10⁻²³ J/K), T is the temperature in Kelvin, and u is the electron mobility.

Plugging in the values given in the problem:

u = 970 [tex]cm^2/Vs[/tex] (note that the units need to be converted to [tex]cm^2/Vs[/tex])

T = 300 K

k = 1.38 x 10⁻²³ J/K

Converting the units of electron mobility from [tex]cm^2/Vs[/tex] to [tex]m^2/s[/tex] gives:

u = 9.7 x 10⁻³  [tex]m^2/s[/tex]

Now we can calculate the diffusion coefficient:

D = kT/u

D = (1.38 x 10⁻²³ J/K) x (300 K) / (9.7 x 10⁻³ [tex]m^2/s[/tex])

D = 4.28 x 10⁻¹⁰ [tex]m^2/s[/tex]

Learn more about coefficient.

brainly.com/question/28975079

#SPJ11

(a) The semi-major axis of the orbit is 770 km.

(b) The eccentricity of the ellipse is 8.67, calculated using the distance between the foci and length of the major axis of the elliptical orbit.

(a) The semi-major axis of an ellipse is half the distance between its furthest and closest points. In this case, the closest point is 180 km above the surface of the earth, and the furthest point is 1360 km above the surface of the earth. Therefore, the semi-major axis is:

a = (180 km + 1360 km)/2 = 770 km

(b) The eccentricity of an ellipse is defined as the distance between its foci divided by the length of its major axis. Since one of the foci is at the center of the earth, we only need to find the distance between the other focus and the center of the earth. This can be calculated using the fact that the sum of the distances from any point on the ellipse to the two foci is constant and equal to the length of the major axis.

Let's call the distance between the center of the earth and the other focus "c". Then the length of the major axis is:

2a = 2×770 km = 1540 km

At the closest point, the distance from the satellite to the center of the earth is 180 km + the radius of the earth, which we can approximate as 6371 km. At the furthest point, the distance from the satellite to the center of the earth is 1360 km + the radius of the earth. Therefore, we can write:

2a = (180 km + 6371 km + c) + (1360 km + 6371 km - c)

Simplifying, we get:

2a = 2×6371 km + 1360 km

Substituting the value of a, we get:

1540 km = 2×6371 km + 1360 km

Solving for c, we get:

c = sqrt((1540 km)² - (2×6371 km)²) = 6,673 km

Therefore, the eccentricity of the ellipse is:

e = c/a = 6,673 km/770 km = 8.67

The eccentricity of the ellipse is 8.67.

Learn more about Semi-major axis

brainly.com/question/15295099

#SPJ11

When helium capture occurs with a carbon 12 nucleus, it results in Nitrogen 14.

Helium capture, also known as alpha capture, is a type of nuclear reaction in which a helium nucleus (consisting of two protons and two neutrons, denoted as an alpha particle) is captured by a target nucleus.

When a helium capture occurs with a carbon 12 nucleus (which has 6 protons and 6 neutrons), the resulting nucleus will have 8 protons and 8 neutrons. This results in the formation of a nitrogen 14 nucleus, which has 7 protons and 7 neutrons, denoted as 14N or Nitrogen-14.

Learn more about carbon 12 at

https://brainly.com/question/31324610

#SPJ11

To show that a transition matrix is regular by raising the matrix to different powers until you find a power with all positive elements and its steady-state vector is equation πP = π while ensuring the elements of π sum to 1.

A transition matrix is regular if some power of the matrix has only positive elements, a steady-state vector is a probability vector that remains unchanged after being multiplied by the transition matrix. To demonstrate that the transition matrix is regular, raise the matrix to different powers until you find a power with all positive elements. If such a power exists, the matrix is considered regular.

Next, to find the steady-state vector, solve the following equation: πP = π, where π is the steady-state vector, and P is the transition matrix. Additionally, ensure the elements of π sum to 1, representing the total probability, you can solve this system of linear equations using methods like Gaussian elimination, matrix inversion, or iterative techniques. In summary, to show that a transition matrix is regular, find a power of the matrix with all positive elements, then, to find the steady-state vector, solve the equation πP = π while ensuring the elements of π sum to 1.

Learn more about transition matrix at:

https://brainly.com/question/28026040

#SPJ11

The forward force of inertia is what pushes your friend forward during the rapid stop of the train.

Inertia is the tendency of an object to resist changes in its state of motion, which means that your friend's body wants to continue moving forward with the same speed and direction as the train. When the train suddenly stops, the forward force of inertia causes your friend's body to keep moving forward until another force, such as the friction between their feet and the train's floor, stops them. Gravity and the normal force are also present, but they do not directly contribute to your friend's forward motion during the stop.

To learn more about inertia https://brainly.com/question/1140505

#SPJ11

The torque produced by a weight of 30 N at the end of a 1.5 m horizontal pole is 45 Nm.

To calculate the torque produced, you can use the following formula:

Torque (τ) = Force (F) × Distance (d)

In this case, the weight of the ball (30 N) is the force, and the length of the horizontal pole (1.5 m) is the distance.

1: Identify the force and distance.
Force (F) = 30 N
Distance (d) = 1.5 m

Step 2: Use the formula to calculate the torque.
Torque (τ) = Force (F) × Distance (d)

Step 3: Plug in the values and calculate the torque.
τ = 30 N × 1.5 m

Step 4: Calculate the result.
τ = 45 Nm

The torque produced when a 30 N ball hangs from the end of a 1.5-m horizontal pole is 45 Nm.

Learn more about torque:

https://brainly.com/question/17512177

#SPJ11

The potential energy is PE_head ≈ 6.86 J (Joules) and the work done by the person is approximately 27.43 Joules.

To find the potential energy of the book relative to the ground, we can use the formula for gravitational potential energy,
PE = m * g * h

where PE is potential energy, m is the mass of the book (1.75 kg), g is the acceleration due to gravity (9.81 m/s^2), and h is the height above the ground (2.00 m).

PE_ground = 1.75 kg * 9.81 m/s^2 * 2.00 m
PE_ground ≈ 34.29 J (Joules)

To find the potential energy of the book relative to the top of the person's head, we need to determine the height above the person's head,

height_above_head = 2.00 m - 1.60 m = 0.40 m

PE_head = 1.75 kg * 9.81 m/s^2 * 0.40 m
PE_head ≈ 6.86 J (Joules)

To relate the work done by the person to the potential energies, we can use the following equation,

W = PE_ground - PE_head

where W is the work done by the person.

W = 34.29 J - 6.86 J
W ≈ 27.43 J

The work done by the person is approximately 27.43 Joules.

Learn more about "potential energy": https://brainly.com/question/21175118

#SPJ11

A disk has a rotational inertia of 6.0 kg·m2 and a constant angular acceleration of 2.0 rad/s2. if it starts from rest the work done during the first 5.0 s by the net torque acting on it is 300 J.

The formula for work done by torque is

             W = (1/2)Iω²,

where I is the rotational inertia, ω is the angular velocity and the 1/2 factor accounts for the fact that the torque is not constant.

In this case, the disk starts from rest, so its initial angular velocity is zero. We can use the formula for angular acceleration,

        α = Δω/Δt, to find the angular velocity after 5.0 seconds:

        α = 2.0 rad/s²
       Δt = 5.0 s
       Δω = αΔt = 2.0 rad/s² * 5.0 s = 10.0 rad/s

Now we can plug in the values for I and ω into the work formula:

     I = 6.0 kg·m²
     ω = 10.0 rad/s

     W = (1/2)Iω² = (1/2)(6.0 kg·m²)(10.0 rad/s)²

         = 300 J

Therefore, the work done during the first 5.0 s by the net torque acting on the disk is 300 J.

Learn more about rotational inertia here:

https://brainly.com/question/28019200

#SPJ11

A disk has a rotational inertia of 6.0 kg·m2 and a constant angular acceleration of 2.0 rad/s2. if it starts from rest the work done during the first 5.0 s by the net torque acting on it is 300 J.

The formula for work done by torque is

             W = (1/2)Iω²,

where I is the rotational inertia, ω is the angular velocity and the 1/2 factor accounts for the fact that the torque is not constant.

In this case, the disk starts from rest, so its initial angular velocity is zero. We can use the formula for angular acceleration,

        α = Δω/Δt, to find the angular velocity after 5.0 seconds:

        α = 2.0 rad/s²
       Δt = 5.0 s
       Δω = αΔt = 2.0 rad/s² * 5.0 s = 10.0 rad/s

Now we can plug in the values for I and ω into the work formula:

     I = 6.0 kg·m²
     ω = 10.0 rad/s

     W = (1/2)Iω² = (1/2)(6.0 kg·m²)(10.0 rad/s)²

         = 300 J

Therefore, the work done during the first 5.0 s by the net torque acting on the disk is 300 J.

Learn more about rotational inertia here:

https://brainly.com/question/28019200

#SPJ11

The maximum induced emf in the secondary coil is 65.32 V.

The relationship between the voltage in the primary coil (VP), the voltage in the secondary coil (VS), the number of turns in the primary coil (NP), and the number of turns in the secondary coil (NS) is given by:

[tex]VP/VS = NP/NS[/tex]

We know that the maximum value of the emf in the primary coil (VP) is 155 V and the number of turns in the primary coil (NP) is 1300.

We need to find the maximum induced emf in the secondary coil (VS) when the number of turns in the secondary coil (NS) is 550.

Using the formula above, we can rearrange it to solve for VS:

[tex]VS = (VP * NS) / NP[/tex]

Substituting the given values, we get:

[tex]VS = (155 V * 550) / 1300\\VS = 65.32 V[/tex]

Therefore, the maximum induced emf in the secondary coil is 65.32 V.

Learn more about Induced emf

brainly.com/question/31034987

#SPJ11

Two uniform circular disks having the same and the same thickness are made from different materials The disk with the smaller rotational inertia is  the one made from the less dense material (D).

The rotational inertia of a disk is determined by its mass distribution, which is affected by its thickness and density. Therefore, if two uniform circular disks have the same thickness but are made from different materials, the one with the higher density will have a greater mass and hence a larger rotational inertia. However, it's important to note that the larger rotational inertia does not necessarily mean a larger angular velocity. The angular velocity depends on the torque applied to the disk and its rotational inertia, according to the equation τ = Iα, where τ is the torque, I is the rotational inertia, and α is the angular acceleration.

learn more about rotational inertia Refer: https://brainly.com/question/22513079

#SPJ11

The Given statement "Which, if either, the sun and the moon exerts the larger gravitational force on the other" is They both exert the same force on each other.

According to Newton's Third Law of Motion, for every action, there is an equal and opposite reaction. This means that the Earth and the sun both exert the same gravitational force on each other, despite their differences in size and mass.

The force exerted by the Sun on the Earth is about 76 times the force exerted by the moon on the Earth. The earth is an oblate spheroid, and that means it bulges out in the middle (the equator). That also means the poles end up a little closer to the centre of gravity. That is why on the surface of earth, at the poles the intensity of gravity is the maximum.

The gravitational force that the Sun exerts on Earth is much larger than the gravitational force that Earth exerts on the Sun.but still They both exert the same force on each other.

To know more about gravitational force:https://brainly.com/question/72250

#SPJ11

The reaction force exerted by m₁ is 118.4 N.

Mass of the upper block, m₁ = 8 kg

Mass of the lower block, m₂ = 15 kg

Acceleration, a = 5 m/s₂

Normal reaction is a force that applies perpendicularly to two surfaces that are in contact. It represents the force that is holding the two surfaces together.

The value of limiting friction increases with the magnitude of the normal reaction force.

The force exerted by m₁ is,

F₁ = m₁(g + a)

F₁ = 8(9.8 + 5)

F₁ = 118.4 N

To learn more about normal reaction, click:

https://brainly.com/question/13581624

#SPJ1

Your question was incomplete. Attaching the image file here

Answer:

i) The extension of the cable can be calculated using the formula:

ΔL/L = F/(A*Y)

where ΔL is the extension in length, L is the original length, F is the tension force, A is the cross-sectional area of the cable, and Y is the Young's modulus of steel.

First, we need to calculate the cross-sectional area of the cable:

A = πr^2 = π(0.02m)^2 = 0.00126 m^2

Now we can calculate the extension:

ΔL/L = 400N/(0.00126m^2 * 2.0×10^11 N/m^2) = 1.5873×10^-6

ΔL = (1.5873×10^-6)(7m) = 1.11×10^-5 m

So the cable has to be extended by 1.11×10^-5 m under this tension.

ii) The work done in producing this extension can be calculated using the formula:

W = (1/2)FΔL

where W is the work done, F is the tension force, and ΔL is the extension in length.

Substituting the given values:

W = (1/2)(400N)(1.11×10^-5 m) = 2.22×10^-3 J

Therefore, the work done in producing this extension is 2.22×10^-3 J.

Explanation:

The inductance of the coil is approximately 0.444 H. The rms voltage of the source must be approximately 291 V for the coil to consume an average electrical power of 830 W.

Part A:

We can use the equation X_L = 2πfL, where X_L is the inductive reactance, f is the frequency, and L is the inductance of the coil. Substituting the given values, we get:

230 Ω = 2π(130 Hz)L

Solving for L, we get:

L = 230 Ω / (2π × 130 Hz) ≈ 0.444 H

Therefore, the inductance of the coil is approximately 0.444 H.

Part B:

The average electrical power consumed by the coil is given by P = V(rms)I cos(φ), where V(rms) is the rms voltage, I is the rms current, and cos(φ) is the power factor. Since the coil has only inductive reactance, the power factor is zero, and cos(φ) = 0. Therefore, the equation simplifies to:

P = V(rms)I

We know that the resistance of the coil is 410 Ω, and the inductive reactance is 230 Ω. Therefore, the total impedance of the coil is:

Z = √([tex]R^{2}[/tex] + [tex]X_L^{2}[/tex]) = √([tex]410^{2}[/tex] + [tex]230^{2}[/tex]) ≈ 470 Ω

Since the current through the coil is given by I = V(rms) / Z, we can substitute this expression into the equation for power:

P = V(rms)(V(rms) / Z)

Solving for V(rms), we get:

V(rms) = √(PZ) = √(830 W × 470 Ω) ≈ 291 V

Therefore, the rms voltage of the source must be approximately 291 V for the coil to consume an average electrical power of 830 W.

To know more about inductance, refer here:

https://brainly.com/question/10254645#

#SPJ11

The value of the inductance L is 4.77 mH.

To find the value of the inductance L, first, we need to determine the reactance (X_L) of the inductor using the given rms voltage (8.0 V) and peak current (80 mA). The relationship between voltage, current, and reactance is given by Ohm's law for inductive circuits: V_rms = I_peak × X_L.

1. Convert peak current to rms current: I_rms = I_peak / √2 = 80 mA / √2 ≈ 56.57 mA
2. Calculate reactance: X_L = V_rms / I_rms = 8.0 V / 56.57 mA ≈ 141.42 Ω
3. Find inductance using the formula X_L = 2π × frequency × L:
  L = X_L / (2π × frequency) = 141.42 Ω / (2π × 12 kHz) ≈ 4.77 mH

The value of the inductance L in the given scenario is 4.77 millihenries (mH).

To know more about inductance click on below link:

https://brainly.com/question/10254645#

#SPJ11

We can use the formula for the discharge of a capacitor through a resistor to solve for the resistance the resistance of the resistor is 14.2 kilohms.

A resistor is an electronic component that is used to resist the flow of electric current in a circuit. It is designed to have a specific resistance value, measured in ohms, that determines how much the resistor will impede the flow of current through the circuit. Resistors can be made from various materials and can come in different shapes and sizes, but they all work by converting.

Sizes refer to the dimensions or measurements of an object or entity in terms of length, width, height, volume, or other physical properties. Sizes can be expressed in various units of measurement, such as meters, centimeters, feet, inches, gallons, or liters, depending on the context and the system of measurement

To know more about resistor visit :

https://brainly.com/question/17390255

#SPJ1

To find the Norton equivalent of the circuit with respect to the terminals a and b, we need to determine the equivalent current source (in amperes) and the equivalent resistance (in ohms) connected in parallel to the terminals a and b.

First, we can simplify the circuit by combining the two parallel branches using the current divider rule. The total current flowing from the 8 mA source is divided between the two parallel branches, with the ratio of the currents determined by the ratio of the resistances. The current flowing through the 20 kΩ resistor is:

I_1 = (30 kΩ)/(20 kΩ + 30 kΩ) * 8 mA = 3.2 mA

Similarly, the current flowing through the 30 kΩ resistor is:

I_2 = (20 kΩ)/(20 kΩ + 30 kΩ) * 8 mA = 4.8 mA

The total current flowing out of the 8 mA source is therefore:

I_total = I_1 + I_2 = 3.2 mA + 4.8 mA = 8 mA

This tells us that the Norton equivalent current source is 8 mA.

Next, we need to find the Norton equivalent resistance. To do this, we can replace the 8 mA current source with a short circuit and calculate the total resistance between the terminals a and b. With the 8 mA source replaced by a short circuit, the equivalent resistance is simply the parallel combination of the 20 kΩ and 30 kΩ resistors:

R_eq = (20 kΩ * 30 kΩ)/(20 kΩ + 30 kΩ) = 12 kΩ

Therefore, the Norton equivalent with respect to the terminals a and b is an 8 mA current source in parallel with a 12 kΩ resistor.

To know more about current here

https://brainly.com/question/1100341

#SPJ4

The equation for the final velocity of an object undergoing [tex]t ≈ 5.41 s[/tex]

Why will be reaching a maximum speed of 53 m/s?

We can use the equations of motion to solve this problem. The key is to break the problem into two parts: the freefall part before the parachute is opened, and the part where the parachute is used to slow down the skydiver.

First, we can use the equation for the final velocity of an object undergoing constant acceleration to find the time it takes for the skydiver to reach her maximum speed:

[tex]v_f = v_i + at[/tex]

where v_f is the final velocity, v_i is the initial velocity (which is 0 in this case), a is the acceleration (which is due to gravity, -9.8 m/s^2), and t is the time.

Rearranging the equation to solve for t, we get:

[tex]t = v_f / a[/tex]

Substituting the values given, we get:

[tex]t = 53 m/s / 9.8 m/s^2[/tex]

Simplifying, we get:

[tex]t ≈ 5.41 s[/tex]

This tells us that it takes 5.41 seconds for the skydiver to reach her maximum speed of 53 m/s.

Next, we can use the equation for the distance traveled by an object undergoing constant acceleration to find the distance the skydiver falls during this time:

[tex]d = v_i t + (1/2)[/tex][tex]at^2[/tex]

where d is the distance, v_i is the initial velocity (which is 0 in this case), a is the acceleration (which is due to gravity, -9.8 m/s^2), and t is the time.

Substituting the values given, we get:

[tex]d = 0 + (1/2)(-9.8 m/s^2)(5.41 s)^2[/tex]

Simplifying, we get:

d ≈ 147.9 m

This tells us that the skydiver falls about 147.9 meters during the freefall part of the jump.

Now we can calculate the velocity of the skydiver just before opening her parachute using the equation:

[tex]v_f^2 = v_i^2 + 2ad[/tex]

where v_f is the final velocity (which is 0 in this case), v_i is the initial velocity (which is 53 m/s), a is the acceleration (which is due to gravity, -9.8 m/s^2), and d is the distance traveled during the deceleration phase (which is 310 m - 147.9 m = 162.1 m).

Substituting the values given, we get:

[tex]0 = (53 m/s)^2 + 2(-9.8 m/s^2)(162.1 m - 147.9 m)[/tex]

Simplifying, we get:

[tex]0 = 2809 - 6176[/tex]

This is not possible, since it means that the final velocity is imaginary. This suggests that we made an error in our calculations. Checking our work, we find that the error is in the equation we used to calculate the distance traveled during the freefall part of the jump. We used the wrong value for the acceleration due to gravity - it should be positive, not negative:

[tex]d = v_i t + (1/2)at^2[/tex]

Substituting the correct value for a, we get:

[tex]d = 0 + (1/2)(9.8 m/s^2)(5.41 s)^2[/tex]

Simplifying, we get:

[tex]d ≈ 147.9 m[/tex]

This is the same value we found earlier, but with the correct sign for the acceleration. Now we can redo our calculations for the deceleration phase:

[tex]v_f^2 = v_i^2 + 2ad[/tex]

Substituting the values given, we

Learn more about final velocity

brainly.com/question/28608160

#SPJ11

20.00 kgm/s was the magnitude of the man’s momentum immediately after throwing the mass.

To find the magnitude of the man's momentum immediately after throwing the 1.00-kg mass at 20.0 m/s at an angle of elevation of 40.0°, follow these steps:

1. Calculate the horizontal (x) and vertical (y) components of the mass's velocity.
 [tex]V_x[/tex] = V × cos(θ) = 20.0 m/s × cos(40.0°) = 15.32 m/s
 [tex]V_y[/tex] = V × sin(θ) = 20.0 m/s × sin(40.0°) = 12.85 m/s

2. Determine the momentum of the mass by multiplying its mass by its horizontal and vertical components of velocity.
 [tex]p_x[/tex] = m × [tex]V_x[/tex] = 1.00 kg × 15.32 m/s = 15.32 kg*m/s
 [tex]p_y[/tex] = m × [tex]V_y[/tex] = 1.00 kg × 12.85 m/s = 12.85 kg*m/s

3. Since the man is on frictionless ice, his momentum will be equal and opposite to that of the mass. Therefore, his horizontal and vertical components of momentum are:
[tex]p_m_a_nx[/tex] = [tex]-p_x[/tex]= -15.32 kgm/s

[tex]p_m_a_ny[/tex]= [tex]-p_y[/tex]= -12.85 kgm/s

4. Calculate the magnitude of the man's momentum using the Pythagorean theorem.
 [tex]p_m_a_n[/tex] = [tex]sqrt(p_m_a_nx^2 + p_m_a_n y^2)[/tex]

= sqrt(-15.32 [tex]kgm/s)^2[/tex]+ (-12.85 [tex]kgm/s)^2[/tex] = 20.00 kgm/s

So, the magnitude of the man's momentum immediately after throwing the mass is 20.00 kgm/s.

To know more about Momentum refer here :

https://brainly.com/question/18798405

#SPJ11

Answer: Light is not a form of matter, so a is not a property of light.

Explanation:

wavelength bands were placed into which color guns,

we need to understand that color guns are components of a cathode ray tube (CRT) display, commonly used in older      televisions and monitors. CRT displays have three color guns: red, green, and blue (RGB). These color guns produce different wavelengths corresponding to their respective colors.

1. Red color gun: The red color gun corresponds to the wavelength band of approximately 620-750 nm.
2. Green color gun: The green color gun corresponds to the wavelength band of approximately 495-570 nm.
3. Blue color gun: The blue color gun corresponds to the wavelength band of approximately 450-495 nm.

By combining various intensities of these three primary colors, CRT displays can produce a wide range of colors on the screen.

Learn more about wavelength https://brainly.com/question/31503451

#SPJ11

a. The time constant for a series RC circuit connected to ξ = 12 V with a resistance of 47 kΩ and a capacitance of 3900 pF is 183.3 μs.

b. If the EMF is doubled, the time constant τ will not change, as it depends solely on the resistance and capacitance values in the circuit and is independent of the applied voltage.

To determine the time constant for a series RC circuit connected to ξ = 12 V with a resistance of 47 kΩ and a capacitance of 3900 pF can be calculated using the formula:

τ = RC

where τ is the time constant, R is the resistance, and C is the capacitance.

We are given that 1 pF = 10⁻¹² F, we can convert the capacitance to farads:

C = 3900 × 10⁻¹² F.

To find the time constant τ, multiply the resistance and capacitance:

τ = (47 × 10³ Ω) × (3900 × 10⁻¹² F)

≈ 183.3 × 10⁻⁶ s or 183.3 μs

Learn more about time constant: https://brainly.com/question/13860412

#SPJ11

The car's voltage is highest at the: bottom of the car. The correct option is (b).

When a conductor (such as a car) moves through a magnetic field (such as the Earth's magnetic field), a voltage is induced in the conductor. The magnitude and direction of this voltage depend on the speed and direction of the motion as well as the strength and direction of the magnetic field.

In this scenario, the car is driving to the east and the Earth's magnetic field is pointing to the north. By using the right-hand rule, we can determine the direction of the induced voltage.

Aligning the thumb of the right hand in the direction of the car's motion (east) and the fingers in the direction of the magnetic field (north), the direction of the induced voltage is perpendicular to both the thumb and fingers, and is pointing downwards (towards the ground).

Therefore, the highest voltage will be on the bottom of the car, where it is closest to the ground and the magnetic field lines. This induced voltage could potentially be used to power electronic devices in the car, such as a GPS or a mobile phone charger.

To know more about "Voltage" refer here:

https://brainly.com/question/30764403#

#SPJ11

As a result, the rod has a total kinetic energy of 552.4 J and a rotational kinetic energy of 344.7 J.

The formulae for rotational kinetic energy and translational kinetic energy can be used as a starting point:

Rotational kinetic energy: K_rot = (1/2) [tex]I w^2[/tex]

Translational kinetic energy: K_trans = (1/2) [tex]mv^2[/tex]

Here I is the moment of inertia, ω is the angular speed, m is the mass, and v is the velocity of the center of mass.

The moment of inertia of the rod rotating about an axis perpendicular to the rod and passing through its center of mass, we use the formula for the moment of inertia of a thin rod:

I = (1/12) m [tex]L^2[/tex]

I = (1/12) (3.4 kg) [tex](2.3 m)^2[/tex] = 0.621 kg [tex]m^2[/tex]

Using the given values for the angular speed and the velocity of the center of mass, we can calculate the rotational kinetic energy and translational kinetic energy:

K_rot = (1/2)  = (1/2) (0.621) (33) = 344.7 J

K_trans =  (1/2) [tex]mv^2[/tex] = (1/2) (3.4 kg) (11) = 207.7 J

The total kinetic energy is the sum of the rotational and translational kinetic energies:

K_total = K_rot + K_trans = 344.7 J + 207.7 J = 552.4 J

Learn more about kinetic energy visit: brainly.com/question/25959744

#SPJ4

To find the charge that flows through the electric hair dryer in 4.0 minutes, we need to use the formula:

charge = current x time

Substituting the given values, we get:

charge = 11 A x 4.0 min = 44 C

Therefore, the amount of charge that flows through the hair dryer in 4.0 minutes is 44 Coulombs.
Hi! To calculate the charge that flows through the electric hair dryer in 4.0 minutes, you can use the formula Q = I * t, where Q is the charge, I is the current, and t is the time.

Given that the current (I) in the hair dryer is 11 A, and the time (t) is 4.0 minutes (or 240 seconds, since 1 minute = 60 seconds), you can plug these values into the formula:

Q = 11 A * 240 s

Q = 2640 C

So, 2640 Coulombs of charge flow through the electric hair dryer in 4.0 minutes.

Learn more about electric hair dryer here;

https://brainly.com/question/29086609

#SPJ11

The kinetic energy of the rolling cylinder can be divided into two components: translational kinetic energy and rotational kinetic energy. Therefore, the energy of the rolling cylinder is 5745.165625 J.

The translational kinetic energy and velocity of the cylinder is given by:

KE_translational = (1/2) * m x [tex]v^2[/tex]

Here m is the mass of the cylinder and v is the velocity of its center of mass.

KE_translational = (1/2) * 7.95 kg * (24.3)

= 4595.9325 J

The rotational kinetic energy of the cylinder is given by:

KE_rotational = (1/2) * I * [tex]w^2[/tex]

Here I is the moment of inertia of the cylinder and w is its angular velocity. For a uniform solid cylinder rolling without slipping, the moment of inertia is given by:

I = (1/2) * m *[tex]r^2[/tex]

Here the radius of the cylinder. The angular velocity w is related to the linear velocity v by:

w = v / r

Substituting these values, we get:

KE_rotational = (1/2) * (1/2) * m * [tex]r^2 * (v / r)^2[/tex]

= [tex](1/4) * m * v^2[/tex]

Substituting the given values, we get:

KE_rotational = (1/4) * 7.95 kg * [tex](24.3 m/s)^2[/tex]

= 1149.233125 J

The total kinetic energy of the cylinder is the sum of its translational and rotational kinetic energies:

KE_total = KE_translational + KE_rotational

= 4595.9325 J + 1149.233125 J

= 5745.165625 J

Learn more about velocity visit: brainly.com/question/24445340

#SPJ4