Sulfuric acid is essential to dozens of important industries from steelmaking to plastics and pharmaceuticals. More sulfuric acid is made than any other industrial chemical, and world production exceeds 2. 0 x 10" kg per year. The first step in the synthesis of sulfuric acid is usually burning solid sulfur to make sulfur dioxide gas. Suppose an engineer studying this reaction introduces 4. 8 kg of solid sulfur and 10. 0 atm of oxygen gas at 550. °C into an evacuated 75. 0 L tank. The engineer believes K. = 3. 7 for the reaction at this temperature. Calculate the mass of solid sulfur she expects to be consumed when the reaction reaches equilibrium. Round your answer to 2 significant digits. Note for advanced students: the engineer may be mistaken in her belief about the value of K, and the consumption of sulfur you calculate may not be what she actually observes. "

Answers

Answer 1

The expected mass of solid sulfur consumed at equilibrium is 1.6 kg.

The balanced chemical equation for the reaction is:

S(s) + O₂(g) ⇌ SO₂(g)

The equilibrium constant expression for this reaction is:

K = [SO₂]/[S][O₂]

where [SO₂], [S], and [O₂] are the molar concentrations of SO₂, S, and O₂ at equilibrium.

Given the initial conditions of the reaction and the equilibrium constant, we can set up an ICE (initial, change, equilibrium) table and solve for the equilibrium concentrations of the species:

S(s) + O₂(g) ⇌ SO₂(g)
I 4.8 kg 10.0 atm 0

C -x -x +x

E 4.8-x 10.0-x x

Using the ideal gas law, we can convert the partial pressure of oxygen to the molar concentration:

[P(O₂)]/[RT/V] = n(O2)/V

[10.0 atm]/[(0.08206 L·atm/K·mol)(550°C + 273.15 K)/75.0 L] = n(O₂)/75.0 L

n(O₂) = 0.261 mol

Substituting the equilibrium concentrations into the equilibrium constant expression and solving for x, we get:

K = [SO₂]/[S][O₂]

3.7 = x/(4.8-x)(0.261)

x = 1.6 kg

As a result, the mass of solid sulphur consumed at equilibrium is 1.6 kg.

To know more about the Sulfuric acid, here

https://brainly.com/question/15297259

#SPJ4


Related Questions

Ozone is depleted in the stratosphere by chlorine fromCF3Cl according to the following set of equations:
CF3Cl + UV light --> CF3 + Cl
Cl + O3 --> ClO + O2
O3 + UVlight --> O2 + O
ClO + O --> Cl + O2
what total volume of ozone measured at a pressure of 22.0 mmhg and a temperature of 230 k can be destroyed when all of the chlorine from 17.0 g of cf3cl goes through 10 cycles of these reactions?

Answers

The total volume of ozone that can be destroyed in 10 cycles of these reactions is approximately 10.4 L at STP.

The first reaction shows that one molecule of CF3Cl can produce one chlorine atom (Cl) when exposed to UV light. Therefore, 17.0 g of CF3Cl (molar mass = 137.37 g/mol) would contain:

n = mass / molar mass = 17.0 g / 137.37 g/mol = 0.1239 mol CF3Cl

Since each cycle of the reactions consumes one chlorine atom, 0.1239 mol of CF3Cl would provide 0.1239 mol of chlorine atoms for 10 cycles:

moles of Cl = 0.1239 mol CF3Cl × 1 mol Cl / 1 mol CF3Cl × 10 cycles = 1.239 mol Cl

Using the given equations, one Cl atom can destroy one molecule of ozone (O3). Therefore, the number of molecules of O3 destroyed in 10 cycles would be:

number of O3 molecules destroyed = 1.239 mol Cl × 1 mol O3 / 1 mol Cl = 1.239 mol O3

To calculate the volume of O3 at STP (standard temperature and pressure), we can use the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

At STP, P = 1 atm and T = 273 K. Therefore, we can rearrange the ideal gas law to solve for the volume:

V = nRT / P

V = nRT / P

V = (1.239 mol O3)(0.08206 L·atm/mol·K)(230 K) / (22.0 mmHg × 1 atm/760 mmHg)

V ≈ 10.4 L

learn more about molar mass here:

https://brainly.com/question/22997914

#SPJ11

g/the lewis structure of bh3 is drawn in a form that violates the octet rule for b. this because:

Answers

The Lewis structure of BH3 violates the octet rule for B because B only has 3 valence electrons, which means it cannot accommodate an octet.

The octet rule states that atoms tend to gain, lose or share electrons in order to achieve a full outer shell of 8 electrons, which is considered a stable electron configuration. However, there are some exceptions to this rule and BH3 is one of them.
BH3 is a compound that belongs to the group of compounds known as electron deficient compounds. These compounds contain atoms that lack sufficient valence electrons to form a complete octet, and as a result, they have incomplete octets in their valence shells.
In the case of BH3, the boron atom only has 3 valence electrons. In order to form bonds with the 3 hydrogen atoms, boron shares its 3 electrons with the hydrogen atoms. This results in a molecule with only 6 valence electrons around the boron atom, which is less than the octet. The molecule is therefore considered an exception to the octet rule.
In summary, the Lewis structure of BH3 violates the octet rule for B because boron only has 3 valence electrons and as a result, it cannot accommodate an octet. The molecule is considered an electron deficient compound and is an exception to the octet rule.

for more such question on octet rule

https://brainly.com/question/30218064

#SPJ11

Indicate whether each of the following actions will decrease or increase the rate of dissolving of a sugar cube in water and explain why? Cooling the sugar cube-water mixture b- Crushing the sugar cube to give a garnulated form of the sugar a- 2-How many grams of sucrose (solute) must be added to 375 g of water (solvent) to prepare a 2.75%(m/m) solution of sucrose? 3-How many grams of sucrose (table sugar, C12H22011) are present in 185 mL of a 2.50 M sucrose solution? Molar Mass of sucrose is equal to 342.34 g/mol 4- A nurse wants to prepare a 1M silver nitrate solution from 24 mL of a 3M stock solution of silver nitrate. How much water, in ml, should be added to the 24 mL of stock solution? 5- How many grams of water must be added to 20.0 g of NaCl in order to prepare a 6.75% (m/m) solution?

Answers

Cooling the sugar cube-water mixture: Decrease in temperature decreases the kinetic energy of the water molecules, which in turn reduces their ability to interact with and dissolve the sugar molecules. Therefore, cooling the sugar cube-water mixture will decrease the rate of dissolving of the sugar cube in water.

To prepare a 2.75% (m/m) solution of sucrose, we need 2.75 grams of sucrose per 100 grams of water. Therefore, the mass of sucrose required in 375 g of water can be calculated as follows:

2.75 g of sucrose per 100 g of water

x g of sucrose per 375 g of water

Cross-multiplying, we get:

[tex]100x = 2.75 x 375[/tex]

[tex]x = (2.75 x 375)/100[/tex]

[tex]x = 10.31 g[/tex]

Therefore, we need 10.31 grams of sucrose to prepare a 2.75% (m/m) solution in 375 grams of water.

To calculate the number of grams of sucrose present in 185 mL of a 2.50 M sucrose solution, we can use the following formula:

Molarity = moles of solute/volume of solution in liters

We can first calculate the number of moles of sucrose present in the solution as follows:

2.50 M = moles of sucrose/1 L of solution

moles of sucrose = 2.50 mol/L x 0.185 L

moles of sucrose = 0.4625 mol

The mass of sucrose can be calculated from the number of moles as follows:

mass = moles x molar mass

mass = 0.4625 mol x 342.34 g/mol

mass = 158.50 g

Therefore, 185 mL of a 2.50 M sucrose solution contains 158.50 grams of sucrose.

To prepare a 1M silver nitrate solution from 24 mL of a 3M stock solution of silver nitrate, we can use the formula:

M1V1 = M2V2

where M1 is the initial molarity (3M), V1 is the initial volume (24 mL), M2 is the final molarity (1M), and V2 is the final volume (unknown).

Rearranging the formula to solve for V2, we get:

V2 = (M1V1)/M2

V2 = (3M x 24 mL)/1M

V2 = 72 mL

Therefore, 48 mL of water should be added to 24 mL of the stock solution to prepare a 1M silver nitrate solution.

To prepare a 6.75% (m/m) solution of NaCl, we need 6.75 grams of NaCl per 100 grams of solution. Therefore, the mass of NaCl required in 100 grams of solution can be calculated as follows:

6.75 g of NaCl per 100 g of solution

x g of NaCl per 20.0 g of solution

Cross-multiplying, we get:

100x = 6.75 x 20.0

x = (6.75 x 20.0)/100

x = 1.35 g

Therefore, 1.35 grams of NaCl should be added to 18.65 grams of water to prepare a 6.75% (m/m) solution.

Learn more about dissolving here:

https://brainly.com/question/17018275

#SPJ11

The molecule H2O2 (H-O-O-H) has: A. 4 bonding pairs and 3 lone pair. B. 3 bonding pairs and 2 lone pairs. C. 3 bonding pairs and 3 lone pairs. D. 3 bonding pairs and 4 lone pair. E. some number of lone and bond pairs not

Answers

The molecule H2O2 (H-O-O-H) has 3 bonding pairs and 2 lone pairs. It is important to note that the number of bonding and lone pairs in a molecule determines its shape and reactivity.

The molecule H2O2, also known as hydrogen peroxide, has a total of 5 pairs of electrons around its central oxygen atom. In order to determine the number of bonding and lone pairs, we need to first understand the electron pair geometry of the molecule. H2O2 has a bent or V-shaped molecular geometry with the two hydrogen atoms on one side and two lone pairs of electrons on the other.

The lone pairs of electrons are non-bonding pairs and do not participate in chemical bonding. They occupy more space than bonding pairs, resulting in a distortion of the molecular geometry. Therefore, H2O2 has 2 lone pairs of electrons and 3 bonding pairs of electrons.

Therefore, Understanding the electron pair geometry of a molecule is crucial in predicting its properties and behavior.

Here you can learn more about lone pairs

https://brainly.com/question/30886923#

#SPJ11  

shape of the sulfur pentafluoryl sf5 cation

Answers

The Sulfur pentafluoride cation (SF5+) has a trigonal bipyramidal molecular geometry, which means it has two different types of bond angles and three axial positions (occupied by the fluorine atoms) and two equatorial positions (occupied by a lone pair of electrons).

The trigonal bipyramidal geometry arises due to the presence of five electron domains around the sulfur atom, which minimize the electron-electron repulsion and stabilize the molecule.

The Sulfur pentafluoride cation is an important compound in organic and inorganic chemistry and is widely used in various industrial applications.

To learn more about  Sulfur pentafluoride cation here:

https://brainly.com/question/14491882

#SPJ11

a solution has a ph of 10.20 at 25°c. what is the hydroxide-ion concentration at 25°c? a. 1.0 × 10 –7 m b. 6.3 × 10 –11 m c. 2.2 × 10 –2 m d. 3.8 m e. 1.6 × 10 –4 m

Answers

A solution with a pH of 10.20 at 25°C has a hydroxide-ion concentration of 1.6 × 10^–4 M.

Step 1: To find the hydroxide-ion concentration, we first need to determine the pOH.
pOH = 14 - pH

Step 2: Calculate pOH.
pOH = 14 - 10.20 = 3.8

Step 3: Now, we can determine the hydroxide-ion concentration using the formula:
[OH⁻] = 10^(-pOH)

Step 4: Calculate the hydroxide-ion concentration.
[OH⁻] = 10^(-3.8) = 1.6 × 10^–4 M

Thus, the correct answer is option E: 1.6 × 10^–4 M.

To learn more about hydroxide-ion concentration, visit:

https://brainly.com/question/28464162

#SPJ11

HOw much energy does it take for 100.0g of iron to change from 25°c to 50 ° c. The specific heat capacity oF ion is 0.449 j/g°c.

Answers

The energy required for 100.0 g of iron to change from 25 °C to 50 °C is 1122.25 J.

How to find the energy?

To calculate the energy required for 100.0 g of iron to change temperature from 25 °C to 50 °C, we can use the formula for heat transfer:

q = m * C * ΔT

where:

q = heat transfer (in joules)m = mass of the substance (in grams)C = specific heat capacity of the substance (in J/(g°C))ΔT = change in temperature (in °C)

Given:

Mass of iron (m) = 100.0 g

Specific heat capacity of iron (C) = 0.449 J/(g°C)

Change in temperature (ΔT) = Final temperature - Initial temperature = 50 °C - 25 °C = 25 °C

Plugging in the given values into the formula:

q = 100.0 g * 0.449 J/(g°C) * 25 °C

q = 1122.25 J

Learn more about the specific heat capacity at.

https://brainly.com/question/21406849

#SPJ1

Discuss at least 3 different parameters that either were or could be used when comparing your zeolites to charcoal. These do not all have to be chemical properties. You do not have to compare the zeolites to charcoal using all three methods, but at least one of them should have been tested during the project. Ask yourselves the question, "If I were the Environmental Protection Agency (EPA) what would I need to know before I would to want to use this zeolite over charcoal?"
*The absorbance values at lambda max were obtained for each sequestration agent for this experiment after adding each material to a solution of red dye*

Answers

Three different parameters can be used when comparing zeolites and charcoal as sequestration agents. These parameters are: Adsorption capacity, Regeneration,  Reusability and  Environmental Impact

1. Adsorption capacity: This is the most important parameter when comparing the efficiency of zeolites and charcoal in removing contaminants from a solution. The absorbance values at lambda max you mentioned are a measure of the adsorption capacity of each agent. A lower absorbance value after adding the agent to the red dye solution indicates a higher adsorption capacity. The EPA would be interested in using the agent with the highest adsorption capacity to effectively remove contaminants.

2. Regeneration and Reusability: Another important parameter is the ability of the zeolites and charcoal to be regenerated and reused. The EPA would prefer a sequestration agent that can be easily regenerated so that it can be used multiple times and be more cost-effective in the long run. The regeneration process should be straightforward and efficient.

3. Environmental Impact: The third parameter is the environmental impact of using zeolites and charcoal as sequestration agents. The EPA would want to know if there are any harmful byproducts generated during the adsorption process or if the agent is prone to releasing the adsorbed contaminants back into the environment. An environmentally friendly sequestration agent would be preferable.

In conclusion, when comparing zeolites to charcoal as sequestration agents, the EPA would be interested in knowing the adsorption capacity, regeneration and reusability, and environmental impact of each agent to make an informed decision on which agent to use.

For more such questions on zeolites , click on:

https://brainly.com/question/14976531

#SPJ11

This question has multiple parts. Work all the parts to get the most points. a For each of the following molecules, indicate whether or not cis-trans isomerism is possible. 1-Butene a. no b. yes Submit b 1-Bromo-2-pentene a. no yes C3-Hexene b. no c. yes d 1,2-Dichlorocyclopentane
a, no
b. yes
Previous question

Answers

cis-trans isomerism is possible for two of these, that are, 1-Butene and C3-Hexene while it is not possible in the remaining two, that are 1-Bromo-2-pentene and 1,2-Dichlorocyclopentane.

For each of the molecules given, we need to determine whether or not they can exhibit cis-trans isomerism.

1. Butene: This molecule has a carbon-carbon double bond, which means that it can exhibit cis-trans isomerism if there are two different groups attached to each of the carbons in the double bond. In this case, the molecule has two methyl groups attached to one carbon and two hydrogen atoms attached to the other carbon, so cis-trans isomerism is possible. Therefore, the answer is (b) yes.

2. 1-Bromo-2-pentene: This molecule also has a carbon-carbon double bond, but in this case, one of the carbons has a bromine atom attached to it and the other carbon has a methyl group attached to it. Since these two groups are not different from each other, cis-trans isomerism is not possible. Therefore, the answer is (a) no.

3. C3-Hexene: This molecule has a carbon-carbon double bond and six carbon atoms in total, which means that there are three possible isomers - two cis isomers and one trans isomer. Therefore, the answer is (c) yes.

4. 1,2-Dichlorocyclopentane: This molecule has a ring structure and two chlorine atoms attached to adjacent carbons. Since the two groups are on the same side of the ring, cis-trans isomerism is not possible. Therefore, the answer is (a) no.

Learn more about double bond here:

brainly.com/question/30575593

#SPJ11

express the oxidation of cysteine, hsch2ch(nh2)cooh, to dicysteine, hoocch(nh2)ch2ssch2ch(nh2)cooh, as the difference of two half-reactions, one of which is: o2(g) 4 h (aq) 4 e– → 2 h2o(l)

Answers

Cysteine loses electrons in the oxidation reaction, while oxygen gains them in the reduction reaction, balancing the equation.

Which two half-reactions are they?

There are two half-reactions in every oxidation-reduction reaction: an oxidation half-reaction and a reduction half-reaction. The oxidation-reduction reaction is the product of these two half-reactions.

The oxidation of cysteine, HSCH₂CH(NH₂)COOH, to dicysteine, HOOCCH(NH₂)CH₂SSCH₂CH(NH₂)COOH, can be represented as the sum of two half-reactions:

Half-reaction 1 (oxidation):

HSCH₂CH(NH₂)COOH → HOOCCH(NH₂)CH₂SSCH₂CH(NH₂)COOH       + 2 e–

Half-reaction 2 (reduction):

O₂(g) + 4H⁺(aq) + 4e– → 2 H₂O(l)

Make sure that each half-reaction transfers the same number of electrons in order to produce the whole reaction for the oxidation of cysteine. By dividing half-reaction 1 by 4, we can achieve a balance in the number of electrons in this situation:

4 HSCH₂CH(NH₂)COOH → 4 HOOCCH(NH₂)CH₂SSCH₂CH(NH₂)COOH + 8e–

Now that the two half-reactions have been included, we can create the overall balanced equation:

4 HSCH₂CH(NH₂)COOH + O₂(g) + 4 H⁺(aq) → 4 HOOCCH(NH₂)CH₂SSCH₂CH(NH₂)COOH + 2H₂O(l)

To know more about oxidation visit:-

https://brainly.com/question/16976470

#SPJ1

14. A solution of sodium hydroxide (NaOH), a strong base, has a concentration of 6.0 M. What volume of this solution must be used to make 1.0 liters of a 3.0 M solution of sodium hydroxide?

Answers

0.5 L of the 6.0 M solution should be added to 0.5 L of water to make 1.0 L of a 3.0 M solution of sodium hydroxide.

What is Molarity?

A solution's molarity (M) is a measure of the amount of solute in moles that is present per liter of solution.

Equation:

To make a 3.0 M solution of sodium hydroxide, we need to dilute the 6.0 M solution by adding water. Let's use V to represent the volume of the 6.0 M solution that needs to be added to make the 3.0 M solution.

The amount of sodium hydroxide (in moles) in the two solutions should be the same:

(6.0 M) x V = (3.0 M) x (1.0 L)

Solving for V, we get:

V = (3.0 M x 1.0 L) / 6.0 M

V = 0.5 L

To know more about Molarity, click here

https://brainly.com/question/8732513

#SPJ9

Describe how expression of the two different isoforms of lactate dehydrogenase (LDH) allows the different organs of the body to cooperate under hypoxic states; that is, under low oxygen concentration. LDH isozymes must have 2 different conformations, where each conformation would bind O2 with different affinities. The two isozymes of LDH must have differing Km values, which would allow the enzyme with the low Km value to operate at low partial pressures of O2, and the enzyme with the higher KM value to operate at higher partial pressures of O2. The two isozymes of LDH must have differing kcat values, which would impact the rates of the reaction. The LDH isozymes must bind together to form large protein complex, which would impact the affinity for O2.

Answers

Okay, here is how the different isoforms of lactate dehydrogenase (LDH) allow cooperative functioning under hypoxia:

1. The LDH isozymes have different oxygen affinities due to differing Km values. One isozyme has a lower Km, allowing it to operate effectively at lower oxygen partial pressures. The other isozyme has a higher Km, allowing it to take over catalysis at higher oxygen levels. This allows continuous glycolysis across a range of oxygen conditions.

2. The isozymes have different kcat values, impacting the catalytic rate of the reaction at different oxygen levels. The isozyme with lower Km likely has a lower kcat, allowing slower conversion of lactate at low oxygen. The isozyme with higher Km likely has a higher kcat, enabling faster conversion of lactate when more oxygen is available. This helps match the flux through glycolysis to the oxygen supply.

3. The LDH isozymes can bind together to form larger protein complexes. This likely impacts their oxygen affinity, either increasing it ( allowing activity at even lower O2) or decreasing it (allowing activity at even higher O2). The formation of complexes provides additional flexibility and fine-tuning of enzyme activity based on oxygen levels.

4. With two isozymes, different organs can express the isozyme best suited for their typical oxygen microenvironment. For example, heart muscle might express the low Km isozyme, while liver might express the high Km isozyme. But under hypoxia, the isozymes can work together in a cooperative fashion by forming complexes or swapping subunits. This allows for a coordinated glycolytic response across organs under low oxygen conditions.

In summary, the key features that allow cooperative hypoxic functioning are: differing oxygen affinities (Km values), divergent catalytic rates (kcat values), the ability to form mixed complexes, and differential expression of isozymes tailored to organ-specific oxygen levels. These properties permit a graded and system-wide glycolytic response to decreasing oxygen supply.

For each of the following reactions, identify the Lewis acid and the Lewis base. Drag the appropriate labels to their respective targets 2C1- + BeCl2 ---> BeCl4^2-
Mg2+ + 6H2O ---> Mg(H2O6)^2+ SO3 + OH- ---> HSO4- F- + BF3 ---> BF4-

Answers

For the given reactions, BeCl₂, Mg²⁺, SO₃, and BF₃ are the Lewis acid and Cl⁻, H₂O,  OH⁻, and F⁻ are the Lewis base

Any chemical that can accept a pair of nonbonding electrons, like the H+ ion, is a Lewis acid. In other words, an electron-pair acceptor is what a Lewis acid is. Any chemical that has the ability to give a pair of nonbonding electrons, such as the OH- ion, is considered a Lewis base. Therefore, a Lewis base is an electron-pair donor.

1) 2Cl⁻ + BeCl₂ → BeCl₄²⁻
In this reaction, the Lewis acid is BeCl₂, as it accepts electron pairs from the Lewis base, which is Cl⁻.

2) Mg²⁺ + 6H₂O → Mg(H₂O)₆²⁺
In this case, the Lewis acid is Mg²⁺, as it accepts electron pairs from the Lewis base, which is H₂O.

3) SO₃ + OH⁻ → HSO₄⁻
Here, the Lewis acid is SO₃, as it accepts electron pairs from the Lewis base, which is OH⁻.

4) F⁻ + BF₃ → BF₄⁻
In this reaction, the Lewis acid is BF₃, as it accepts electron pairs from the Lewis base, which is F⁻.

Learn more about  Lewis acid: https://brainly.com/question/22126064

#SPJ11

Which of the following have at least one polar bond? Select all that apply.
O CCl4, O O2, O O=C=O, O CH3CH2CH3

Answers

[tex]CCl_4[/tex] and O=C=O have at least one polar bond. [tex]CH_3CH_2CH_3[/tex] and [tex]O_2[/tex] do not have polar bonds.

Out of the given options, [tex]CCl_4[/tex] and [tex]CO_2[/tex] have at least one polar bond.
In [tex]CCl_4[/tex] (carbon tetrachloride), each carbon-chlorine bond is polar due to the difference in electronegativity between carbon and chlorine atoms. However, the molecule as a whole is non-polar because the bond dipoles cancel each other out, resulting in a net dipole moment of zero.
In [tex]CH_3CH_2CH_3[/tex] (propane), each carbon-hydrogen bond is also polar due to the difference in electronegativity between carbon and hydrogen atoms. The molecule itself is non-polar, but it still contains polar bonds.

To learn more about polar bonds click here https://brainly.com/question/31324076

#SPJ11

What mass of carbon dioxide is present in 1.00 m3 of dry air at a temperature of 21 ∘c and a pressure of 735 torr ?

Answers

The mass of carbon dioxide present in 1.00 m³ of dry air at a temperature of 21 ∘C and a pressure of 735 torr is approximately 0.51 grams.

To calculate the mass of carbon dioxide present in 1.00 m³ of dry air at a temperature of 21 ∘C and a pressure of 735 torr, we will use the ideal gas law:

PV = nRT

where:

P = pressure = 735 torr

V = volume = 1.00 m³

n = number of moles of gas

R = gas constant = 0.0821 L·atm/(mol·K)

T = temperature = 21 ∘C + 273.15 = 294.15 K (temperature must be in Kelvin)

We can rearrange the ideal gas law to solve for the number of moles of gas:

n = PV/RT

Now we need to find the partial pressure of carbon dioxide in the dry air. According to the NOAA Earth System Research Laboratory, the concentration of carbon dioxide in dry air is approximately 0.04% or 400 parts per million (ppm) by volume. Therefore, the partial pressure of carbon dioxide is:

0.04% x 735 torr = 0.0004 x 735 torr = 0.294 torr

Now we can use the partial pressure of carbon dioxide in the ideal gas law to calculate the number of moles of carbon dioxide:

n = (0.294 torr)(1.00 m³)/(0.0821 L·atm/mol·K)(294.15 K) = 0.0116 mol

Finally, we can use the molar mass of carbon dioxide to calculate the mass of carbon dioxide present:

mass = n x M

where M is the molar mass of carbon dioxide, which is approximately 44.01 g/mol.

mass = (0.0116 mol)(44.01 g/mol) = 0.51 g

To learn more about moles here:

https://brainly.com/question/28239680

#SPJ11

In the gaseous system,
N2 + 3H2 ↔ 2NH3 ,
if 0.20 atm of N2, 0.30 atm of H2 and 0.40 atm of NH3 are at equilibrium in a 1.0 L vessel, what is the value of the equilibrium constant, Kp. Please show steps!
A) 0.40
B) 29.6
C) 3.4
D) 23

Answers

To find the value of the equilibrium constant, Kp, we need to use the equation: Kp = (P(NH3))^2 / (P(N2) x P(H2)^3) Substituting the given pressures into the equation, we get: Kp = (0.40)^2 / (0.20 x 0.30^3) Kp = 29.6

Therefore, the answer is (B) 29.6.To explain this conceptually, the equilibrium constant is a measure of the relative amounts of products and reactants at equilibrium. In this case, the equilibrium constant tells us how much ammonia (NH3) is formed from the reaction of nitrogen (N2) and hydrogen (H2) gases.
The numerator of the Kp expression is the pressure of NH3 squared, which represents the amount of product present at equilibrium. The denominator of the expression includes the partial pressures of N2 and H2, which represent the amounts of reactants present at equilibrium.
A large value of Kp indicates that the reaction strongly favors the formation of products, while a small value of Kp indicates that the reaction favors the reactants. In this case, the value of Kp is quite large (29.6), indicating that the reaction strongly favors the formation of ammonia. This makes sense, as there is a relatively high pressure of NH3 at equilibrium compared to the pressures of N2 and H2.

For more information on  equilibrium constant see:

https://brainly.com/question/31321186

#SPJ11

How many σ bonds and π bonds are in the molecule N2H2 ? Draw a Lewis structure to support your answer.

Answers

There are 3 sigma bonds and 2 pi bonds in the N₂H₂ molecule. The Lewis structure for N₂H₂ is as follows: N ≡ N and H - H

According to the Lewis structure, there is a triple bond (≡) between the two nitrogen atoms (N≡N), which consists of one σ bond and two π bonds.

Additionally, each hydrogen atom (H) is bonded to one of the nitrogen atoms, forming two σ bonds (N-H) in total.

Therefore, in the molecule N₂H₂, there are a total of 3 σ bonds (1 N-N σ bond and 2 N-H σ bonds) and 2 π bonds (2 N-N π bonds) as per the Lewis structure.

You can learn more about the Lewis structure at: brainly.com/question/4144781

#SPJ11

if 44.1 ml of silver nitrate solution reacts with excess potassium chloride solution to yield 0.271 g of precipitate, what is the molarity of silver ion in the original solution?

Answers

The molarity of silver ion in the original solution is 0.057 M. To get the molarity of silver ion in the original solution, we need to first determine the moles of silver nitrate that reacted.


We can use the equation: AgNO3 + KCl → AgCl + KNO3
From the equation, we know that 1 mole of silver nitrate reacts with 1 mole of potassium chloride to produce 1 mole of silver chloride.
Using the volume and concentration of the silver nitrate solution, we can calculate the moles of silver nitrate:
Molarity = moles of solute / volume of solution (in liters)
Molarity = moles of AgNO3 / 0.0441 L
We don't know the moles of AgNO3 yet, but we can use the mass of the precipitate (0.271 g) to find the moles of silver chloride:
moles of AgCl = mass of AgCl / molar mass of AgCl
molar mass of AgCl = 107.87 g/mol
moles of AgCl = 0.271 g / 107.87 g/mol = 0.00251 mol
Since 1 mole of AgNO3 produces 1 mole of AgCl, the moles of AgNO3 that reacted is also 0.00251 mol.
Molarity = 0.00251 mol / 0.0441 L = 0.057 M
Therefore, the molarity of silver ion in the original solution is 0.057 M.

Learn more about molarity here, https://brainly.com/question/14469428

#SPJ11

Draw the structure of a phosphatidyl ethanolamine that contains glycerol, oleic acid, and ethanolamine. . You do not have to consider stereochemistry . Be sure to include double bonds where needed. . Indicate the correct charge on all atoms that are charged at neutral pH.

Answers

Sure, here is the structure of a phosphatidyl ethanolamine that contains glycerol, oleic acid, and ethanolamine:

```
             O
              ||
 CH2OH--CH--CH--O--(CH2)7--CH=CH--(CH2)7--COOH
         |           |
       H3C         NH3+


```
Explanation:
- The molecule has a glycerol backbone, which is represented by the CH2OH--CH--CH part. The CH2OH group is attached to the first carbon atom, which is also where the phosphate group would be attached (not shown in the structure).
- The oleic acid component of the molecule is represented by the (CH2)7--CH=CH--(CH2)7--COOH part. This is a long chain fatty acid with 18 carbon atoms, including one double bond (the CH=CH part).
- The ethanolamine component of the molecule is represented by the NH3+ group attached to the third carbon atom of the glycerol backbone.
- Note that the NH3+ group carries a positive charge at neutral pH, whereas the COO- group of the oleic acid component would carry a negative charge. The other atoms in the molecule are neutral.
A phosphatidylethanolamine molecule that contains glycerol, oleic acid, and ethanolamine has the following structure:

1. Start with the glycerol backbone, which has three carbons with hydroxyl groups (-OH) on each carbon.
2. Attach the oleic acid to the first carbon of the glycerol backbone through an ester bond. Oleic acid has a double bond between carbons 9 and 10, making it an unsaturated fatty acid. The structure is CH3(CH2)7CH=CH(CH2)7COOH.
3. Attach a phosphate group (PO4) to the second carbon of the glycerol backbone through another ester bond. At neutral pH, the phosphate group has a negative charge, as one of its oxygens will carry a negative charge (PO4^3- → HPO4^2-).
4. Finally, connect the ethanolamine to the phosphate group through a phosphoester bond. The structure of ethanolamine is H2N-CH2-CH2-OH.

In this phosphatidylethanolamine structure, the phosphate group carries a negative charge at neutral pH. The rest of the molecule is uncharged.

Learn more about phosphatidyl ethanolamine here:

https://brainly.com/question/31171246

#SPJ11

find the ph and percent ionization of each hf solution. for hf, ka=3.5×10−4 .

Answers

The pH of the HF solution is 3.46 and the percent ionization is 5.93%.

To find the pH and percent ionization of each HF solution, we need to use the Ka value of HF, which is 3.5x10^-4. The Ka value is the acid dissociation constant and is used to calculate the degree of ionization of a weak acid.

First, let's write the chemical equation for the dissociation of HF in water:
HF + H2O ⇌ H3O+ + F-

We can assume that the initial concentration of HF is equal to the concentration of the solution since HF is a weak acid and does not dissociate completely. Let's call this initial concentration x.

Using the Ka expression, we can calculate the concentration of H3O+ and F- ions at equilibrium:
Ka = [H3O+][F-]/[HF]
3.5x10^-4 = (x^2)/(x)
x = 5.9x10^-3 M

So the concentration of HF at equilibrium is also 5.9x10^-3 M. Now we can calculate the pH of the solution:
pH = -log[H3O+]
pH = -log(3.5x10^-4)
pH = 3.46

To calculate the percent ionization, we use the equation:
% ionization = [H3O+]/initial concentration x 100%
% ionization = [(3.5x10^-4)/(5.9x10^-3)] x 100%
% ionization = 5.93%

To know more about ionization refer to

https://brainly.com/question/20658080

#SPJ11

weak acids that are phenols ir spectrum

Answers

Acidity of phenols increases as the electron-withdrawing nature of the substituents on the aromatic ring increases.

Explain the weak acids that are phenols ir spectrum?

Weak acids that are phenols have a characteristic absorption spectrum in the UV-Vis range due to the presence of the phenolic group. This spectrum is caused by the electronic transitions of the delocalized electrons in the aromatic ring and is unique to phenols. The acidity of weak acids is determined by their ability to donate a proton (H+) to a base. Phenols, due to the presence of the hydroxyl group (-OH) attached to the aromatic ring, are weaker acids than their carboxylic acid counterparts. The acidity of phenols increases as the electron-withdrawing nature of the substituents on the aromatic ring increases.

Learn more about  phenols ir spectrum.

brainly.com/question/16552428

#SPJ11

3. Which of the following are considered to contribute to the greenhouse effect?
Nitric oxide and methane
Methane and water vapor
Water vapor and nitric oxide
Nitric oxide and sulfur dioxide

Answers

The contributors to greenhouse effects from the list are methane and water vapor. Option 2.

What is the greenhouse effect?

The greenhouse effect is a natural process that occurs in Earth's atmosphere. It refers to the ability of certain gases, known as greenhouse gases, to trap heat and warm the planet's surface.

Greenhouse gases, such as carbon dioxide, methane, and water vapor, absorb and re-emit the heat energy that radiates from the Earth's surface, which keeps the planet warm and habitable for life.

Both methane and water vapor are significant contributors to the greenhouse effect and play an important role in regulating Earth's temperature.

More on greenhouse effects can be found here: https://brainly.com/question/13706708

#SPJ1

when meso-2,3-epoxybutane is treated with aqueous sodium hydroxide, two products are obtained.Draw both the products. Using wedges and dashed, inclicate the stereochemistry

Answers

When meso-2,3-epoxybutane is treated with aqueous sodium hydroxide, two products are obtained. The first product is formed by the ring opening of the epoxide with the nucleophilic attack of OH- ion.

The resulting product is 2,3-butanediol with a hydroxyl group attached to each carbon atom. The stereochemistry of this product is meso as the two hydroxyl groups are on the same side of the molecule.

The second product is formed by the cleavage of the C-O bond of the epoxide. This leads to the formation of 2-butanone and ethylene glycol. The stereochemistry of this product is not relevant as it does not contain any chiral centers.

To summarize, when meso-2,3-epoxybutane is treated with aqueous sodium hydroxide, two products are obtained: 2,3-butanediol with meso stereochemistry and a mixture of 2-butanone and ethylene glycol.

To know more about sodium click here

brainly.com/question/5419833

#SPJ11

what is the concentration of protons [h ] for a solution with ph = 2.42?

Answers

The pH of a solution is defined as the negative logarithm (base 10) of the concentration of hydrogen ions (H+) in moles per liter (M).

Mathematically, pH = -log[H+]

Rearranging this equation, we get:

[H+] = 10^(-pH)

Substituting the given value of pH = 2.42 into this equation, we get:

[H+] = 10^(-2.42)

[H+] = 6.307 x 10^(-3) M

Therefore, the concentration of protons [H+] for a solution with pH = 2.42 is 6.307 x 10^(-3) M.

*IG:whis.sama_ent

What is the [H_3O^+] in a solution that consists of 1.2 M HClO and 2.3 M NaClO? K_a = 3.5 times 10^-8 a. 6.7 times 10^-8 M b. 1.8 times 10^-8 M c. 7.8 times 10^-9 M d. 1.6 times 10^-7 M e. none of the above

Answers

pH=pKa+log(CB)/(acid) pKa=-logka pH=-log([tex]H_{3}[/tex]O+) If the [[tex]H_{3}[/tex]O+] is in a solution containing 1.2 M HClO or 2.3 M NaClO, the correct answer is 1.8 10-8 M.

What exactly is NaClO through chemistry?

Sodium hypochlorite NaOCl is a solution formed by combining chlorine and sodium hydroxide. These two reactants have become the most common co-products of chlor-alkali cells. Sodium hypochlorite, also known as bleach, has a wide range of applications and is a superb disinfectant/antimicrobial agent.

Is NaOCl a liquid or a gas?

Hypochlorite of sodium Chlorine gas dissolved throughout sodium hydroxide is sodium hypochlorite. This is essentially regular bleach. At room temperature, sodium hypochlorite is just a liquid disinfectant that can be dosed using chemical feed pumps.

To know more about NaOCl visit :

brainly.com/question/31087091

#SPJ1

what mass of AgCl will precipitate when 10.0 g of NaCl is added to an aqueous solution of AgNO3?
NaCl(aq) + AgNO3(aq) -> AgCl(s) + NaNO3(aq)

Answers

The mass of AgCl that will precipitate when 10.0 g of NaCl is added to an aqueous solution of AgNO₃ is 24.5 g.

To determine the mass of AgCl that will precipitate, we first need to find the limiting reactant in this reaction.

1. Calculate the moles of NaCl and AgNO₃:
Molar mass of NaCl = 58.44 g/mol
Moles of NaCl = (10.0 g) / (58.44 g/mol) = 0.171 moles

We do not know the mass of AgNO₃, but it is not necessary since we are looking for the limiting reactant.

2. From the balanced equation, the mole ratio of NaCl to AgCl is 1:1. Therefore, the moles of AgCl that will precipitate will be equal to the moles of NaCl (0.171 moles).

3. Calculate the mass of AgCl:
Molar mass of AgCl = 143.32 g/mol
Mass of AgCl = (0.171 moles) × (143.32 g/mol) = 24.5 g

So, when 10.0 g of NaCl is added to an aqueous solution of AgNO₃, 24.5 g of AgCl will precipitate.

Learn more about precipitate here: https://brainly.com/question/30386923

#SPJ11

The mass of AgCl that will precipitate when 10.0 g of NaCl is added to an aqueous solution of AgNO₃ is 24.5 g.

To determine the mass of AgCl that will precipitate, we first need to find the limiting reactant in this reaction.

1. Calculate the moles of NaCl and AgNO₃:
Molar mass of NaCl = 58.44 g/mol
Moles of NaCl = (10.0 g) / (58.44 g/mol) = 0.171 moles

We do not know the mass of AgNO₃, but it is not necessary since we are looking for the limiting reactant.

2. From the balanced equation, the mole ratio of NaCl to AgCl is 1:1. Therefore, the moles of AgCl that will precipitate will be equal to the moles of NaCl (0.171 moles).

3. Calculate the mass of AgCl:
Molar mass of AgCl = 143.32 g/mol
Mass of AgCl = (0.171 moles) × (143.32 g/mol) = 24.5 g

So, when 10.0 g of NaCl is added to an aqueous solution of AgNO₃, 24.5 g of AgCl will precipitate.

Learn more about precipitate here: https://brainly.com/question/30386923

#SPJ11

One of the following bromides spontaneously make the ether under solvolysis conditions with ethanol, which the other refuses to act, even at reflux. Show the mechanism and the products, and explain the apparent discrepancy. Br-Br 10. Give the products of the following 2 reactions, the first one under kinetic and thermodynamic conditions.

Answers

Bromide that spontaneously makes ether under solvolysis conditions with ethanol, while the other does not, is not specified.

In a reaction under kinetic conditions, the product with the lower activation energy will be favored.It is not possible to show the mechanism and products or explain the discrepancy between the two bromides. Solvolysis is a type of nucleophilic substitution reaction, in which the solvent acts as the nucleophile. Bromides can undergo solvolysis reactions in the presence of a suitable solvent, such as ethanol. In a reaction under kinetic conditions, the product with the lower activation energy will be favored. This means that the reaction will proceed more quickly to form the product with the lower activation energy. In contrast, under thermodynamic conditions, the more stable product will be favored. This means that the product with the lower free energy will be formed, which is typically the product with the stronger bonds. The specific products of the reactions are not given, but these principles apply to any reaction under kinetic or thermodynamic control.

Learn more about bromides spontaneously here:

https://brainly.com/question/30672063

#SPJ11

A 0.179 g sample of an unknown halogen occupies 109 mL at 398 K and 1.41 atm. What is the identity of the halogen? (Hint: use the ideal gas law to find n (moles). Then divide mass by moles to find molar mass. Then match this molar mass to the molar mass of the halogens: F2, Cl2, Br2 and I2)1. Bromine2. Fluorine3. Chlorine4. Iodine5. Germanium

Answers

After Comparing the gathered molar mass to the molar masses of the halogens we can see that the closest match is bromine (Br2). So The identity of the unknown halogen is bromine. (Option 1)

To solve this problem, we can use the ideal gas law: PV = nRT. We can rearrange this equation to solve for the number of moles of the unknown gas: n = PV/RT. We can then use the mass of the sample and the number of moles to calculate the molar mass of the unknown halogen.

n = (1.41 atm)(0.109 L)/(0.0821 L•atm/mol•K)(398 K) = 0.00509 mol

Molar mass = 0.179 g/0.00509 mol = 35.1 g/mol

Comparing this molar mass to the molar masses of the halogens (F2 = 38.0 g/mol, Cl2 = 71.0 g/mol, Br2 = 159.8 g/mol, I2 = 253.8 g/mol), we can see that the closest match is bromine (Br2). Therefore, the identity of the unknown halogen is bromine.

Learn More about molar mass

https://brainly.com/question/837939

#SPJ4

8. which cofactor participates directly in most of the oxidation-reduction reactions in the fermentation of glucose to lactate? a. adp b. atp c. fad/fadh2 d. glyceraldehyde 3-phosphate e. nad /nadh

Answers

The cofactor that participates directly in most of the oxidation-reduction reactions in the fermentation of glucose to lactate is nad/nadh.

During the process of fermentation, glucose is broken down into pyruvate which is then converted to lactate through the process of reduction. NAD+ is reduced to NADH during this process by accepting electrons from glucose, and NADH is then oxidized by donating electrons to pyruvate to form lactate. This cycle of oxidation and reduction is essential in the fermentation process and is dependent on the participation of NAD+/NADH.

Learn more about NADH here:

https://brainly.com/question/31028797

#SPJ11

Construct the expression for Kb for the weak base, N2H2 N2H2(aq) + H2O(l) ↔OH (aq) + N2H2^+. (aq) aad on the definition of Kb. drag the tiles to construct the expression for the given base. Kb =

Answers

The expression of Kb for the weak base N₂H₂ is Kb = [OH^-(aq)][N₂H₂^+(aq)] / [N₂H₂(aq)]

To construct the expression for Kb for the weak base N₂H₂, you should consider the given reaction:

N₂H₂(aq) + H₂O(l) ↔ OH^-(aq) + N₂H₂^+(aq)

Based on the definition of Kb, which is the equilibrium constant for a weak base reaction, the expression can be formulated as:

Kb = [OH^-(aq)][N₂H₂^+(aq)] / [N₂H₂(aq)]

Here, the concentrations of the reactants and products at equilibrium are used to determine the value of Kb. Please note that the concentration of H₂O is not included in the expression, as it remains constant throughout the reaction.

To learn more about Kb, visit: https://brainly.com/question/31199764

#SPJ11

Other Questions
You sit down to dinner with your family and have to call your son to come eatmultiple times. When he finally walks into the room his head is hanging low andwill not look you in the eye. When you finally get him to look up at you, you noticehe has a black eye. This is the fourth time this has happened in the past month.You ask him what happened and he tells you it is just the guys in the locker room.How do you handle this situation? what term refers to the individual way in which individuals organize and comprehend the world? What are the leading coefficient and degree of the polynomial?-10v-18+v-23vLeading coefficient: Degree: PQ is tangent to the circle at C. Arc AD = 81 and angle D is 88. Find angle DCQ10395.519151.5 Declare a Boolean variable named goodPassword. Use goodPassword to output "Valid" if passwordStr contains at least 4 letters and passwordStr's length is less than or equal to 7, and "Invalid" otherwise.Ex: If the input is xmz97H2, then the output is:ValidEx: If the input is 4rY2D0QR, then the output is:InvalidNote: isalpha() returns true if a character is alphabetic, and false otherwise. Ex: isalpha('a') returns true. isalpha('8') returns false. }#include using namespace std;int main() { string passwordStr; bool goodPassword; cin >> passwordStr; int letters = 0; getline(cin, passwordStr); for (int i = 0; i < passwordStr.length(); i++) { if (isalpha(passwordStr[i])) { letters++; } } if (letters == 4 && passwordStr.length() Write the Key Features of Industrial Policy- 1991 whats answer0.570.70.821.44 A sweet seller has 48 Kaju burfies and 72 badam becafio. Hewants to stack them in such a waythat each stack has the samenumber and they takethe least area of the train, Whatis the numbers of burfies in each stack. How do you solve this? Please explain :)))Find the measure of YXZThank you!!! It's greatly appreciated! :D A 46 g golf ball leaves the tee at a velocity of 94 m/s. It was struck with a force of 2400 N. Assuming that the force was uniform during the impact, how long was the club in contact with the ball (what is the duration of the impact)? a. 0.25 b. 0.02 c. 2s d.002s An AC voltage is given by v(t) = 10 sin(1000nt +30). a. Use a cosine function to express v(t). b. Find the angular frequency, the frequency in hertz, the phase angle, the period and the rms voltage value. c. Find the time-average power that this voltage delivers to a 25 n resistance. 20 POINTS!Fill in the blank to make the expression a perfect square:n squared plus 10 n plus__(blank)__ HELP MATH SE BELOW IN THE ATTTACHED IMAGE list the major characteristics of web-based design. Leo saves 5/6 of the money he makes raking leaves. What is 5/6 written as a decimal homework in order to minimize the expected quality loss, what strategy would you suggest? Read the excerpt and answer the question.Upon its head, with red extended mouth and solitary eye of fire, sat the hideous beast whose craft had seduced me into murder, and whose informing voice had consigned me to the hangman.Analyze Poes word choices in this excerpt from The Black Cat. Pay particular attention to his use of the word seduced. The tone exhibited in this excerpt can be described as _____.embarrassedarrogantpassing blameguilt ridden first, suppose bx=0bx=0 . find the y coordinate yyy of the point at which the electron strikes the screen. express your answer in terms of ddd and the velocity components vxvxv_x and vyvyv_y . how many coulombs are produced by oxidation of 10.0 grams of hydrogen A point moves along a curve y=2x^2 + 1 in such a way that the y value is decreasing at the rate of 2 units per second. At what rate is x changing when x= 3/2?