PQ is tangent to the circle at C. Arc AD = 81 and angle D is 88. Find angle DCQ

103
95.5
191
51.5

The correct answer of cos(θ) is option (b) -40/41.

To find cos(θ) when the terminal side of angle θ in standard position intersects the unit circle at point P(-40/41, -9/41), we can use the coordinates of P.

In a unit circle, the x-coordinate represents the value of cos(θ). Therefore, cos(θ) is given by the x-coordinate of the point P.

In this case, P has coordinates (-40/41, -9/41). The x-coordinate is -40/41.

So, cos(θ) = -40/41.

The correct answer is option (b) -40/41.

learn more about "cos(θ)":-https://brainly.com/question/21867305

#SPJ11

If The company has three possible types of glue to choose from and the book can either be bound as a paperback or a hardback, then the company is considering 6 treatments. hence, the fourth option is correct.

Explanation:

Given that: The company has three possible types of glue to choose from and the book can either be bound as a paperback or a hardback.

To determine the number of treatments, follow these steps:

Step 1: The company is considering 6 treatments:

glue 1 + paperback, glue 1 + hardback, glue 2 + paperback, glue 2 + hardback, glue 3 + paperback, and glue 3 + hardback.
Thus, the company is considering 3 types of glue and 2 types of binding (paperback and hardback).

Step 2: To determine the total number of treatments, you would multiply the options for each factor. In this case, 3 types of glue * 2 types of binding = 6 treatments.

The company is considering 6 treatments. hence, the fourth option is correct.

Know more about the number of treatments click here:

https://brainly.com/question/29203482

#SPJ11

The rate of change of the area of the rectangle is 12 square inches per second. To find the rate of change of the area, we need to use the formula for the area of a rectangle, which is A = length x width.

At any given time, the length and width of the rectangle can be represented by l and w, respectively.

Given that the length is increasing by 6 in/sec and the width is shrinking at 3 in/sec, we can express their rates of change as dl/dt = 6 in/sec and dw/dt = -3 in/sec (since the width is decreasing).

Now, we can use the product rule of differentiation to find the rate of change of the area:

dA/dt = (d/dt)(lw)
      = l(dw/dt) + w(dl/dt)   (product rule)
      = 10(-3) + 3(6)            (substituting l = 10, w = 3, dl/dt = 6, and dw/dt = -3)
      = 12 in^2/sec

Therefore, the rate of change of the area of the rectangle is 12 square inches per second.

Learn more about rectangle here:

/brainly.com/question/20968176

#SPJ11

If a and b are n × n, b is invertible, and ab is invertible, then a is also invertible.

To show that a is invertible, we need to find an inverse matrix [tex]A^-^1[/tex]such that A[tex]A^-^1 = A^-^1A[/tex] = I (the identity matrix).

Let's begin by using the hint provided and letting c = ab. We know that b is invertible, so we can multiply both sides of c = ab by b^-1 (the inverse of b) to get:

[tex]c(b^-^1) = ab(b^-^1)c(b^-^1) = a(bb^-^1)c(b^-^1) = aIc(b^-^1) = a[/tex]

Now we substitute c = ab back into the equation to get:

[tex]ab(b^-^1) = a[/tex]

Next, we can use the fact that ab is invertible to say that there exists some inverse matrix[tex](ab)^-^1[/tex] such that [tex](ab)(ab)^-^1 = (ab)^-^1(ab)[/tex] = I. Multiplying both sides of this equation by [tex]b^-^1[/tex], we get:

[tex]a(bb^-^1)(ab)^-^1 = (ab)^-^1(bb^-^1)a^-^1[/tex]
[tex]aI(ab)^-^1 = (ab)^-^1I[/tex]
[tex]a(ab)^-^1 = (ab)^-^1[/tex]

So we have shown that a multiplied by the inverse of ab is equal to the inverse of ab. This means that a must also be invertible, since the inverse of ab exists and we can simply multiply it by a to get the inverse of a. Therefore, we have proven that if a and b are n × n, b is invertible, and ab is invertible, then a is also invertible.

Learn more about invertible

brainly.com/question/30453255

#SPJ11

Answer:

41%

Step-by-step explanation:

The volume of the aquarium is:

V = l × w × h

V = 13 in × 5 in × 4 in

V = 260 cubic inches

The volume of water in the aquarium is given as 153 cubic inches. Therefore, the volume of empty space in the aquarium is:

260 - 153 = 107 cubic inches

To find the percentage of the aquarium that is empty, we can divide the volume of empty space by the total volume and multiply by 100:

Empty space percentage = (Volume of empty space / Total volume) × 100

Empty space percentage = (107 / 260) × 100

Empty space percentage ≈ 41%

Therefore, the aquarium is approximately 41% empty.

Answer:

Finding x

8x+5 = 10x

8x-10x=-5

-2/-2= -5/-2

x= 5/2

Length

8x+5

8(5/2)+5

40/2+5/1

20+5

L=25

Width

10x

10(5/2)

50/2

W=25

Perimeter= (length+width)×2

2(l)+2(w)

2(25)+2(25)

50+50

P=100

Step-by-step explanation:

Rectangles do have two equal lengths and two equal widths but the value of x when I plug it in does give the same value which is supposed to be square due to the square having 4 equal sides

To determine if there are any outliers in the data, we can use the Interquartile Range (IQR) method. The IQR is the range between the first quartile (Q1) and the third quartile (Q3). Here's a step-by-step explanation:

Step 1: Calculate the IQR. IQR = Q3 - Q1 = 18.0 - 15.0 = 3.0

Step 2: Find the lower and upper bounds for outliers.

Lower Bound = Q1 - 1.5 * IQR = 15.0 - 1.5 * 3.0 = 15.0 - 4.5 = 10.5

Upper Bound = Q3 + 1.5 * IQR = 18.0 + 1.5 * 3.0 = 18.0 + 4.5 = 22.5

Step 3: Compare the bounds to the minimum and maximum values. The minimum value (13.0) is greater than the lower bound (10.5) and the maximum value (22.0) is less than the upper bound (22.5).

Since both the minimum and maximum values are within the bounds, we know that there are no outliers in the data.

So, the correct answer is: A) there are no outliers in the data.

Know more about Interquartile Range (IQR),

https://brainly.com/question/28922347

#SPJ11

The value of "k" for which the determinant of the given matrix is zero is 2.5

The given problem asks to find the values of "k" for which the determinant of the given matrix is zero.

The given matrix can be represented as:

| 6 0 0 |
| 7 2 0 |
| 0 2 k+7 |

The determinant of the matrix is calculated as:

6 * (2(k+7)) - 0 - 0 - 7 * (2) * 0 + 0 - 0 = 12k - 30

To find the values of "k" for which the determinant is zero, we need to solve the equation:

12k - 30 = 0

Simplifying the equation, we get:

k = 2.5

Therefore, the value of "k" for which the determinant is zero is 2.5.

In general, the determinant of a matrix is a scalar value that represents some important properties of the matrix, such as invertibility and eigenvalues. If the determinant of a matrix is zero, it means that the matrix is singular and does not have an inverse. In the given problem, we have calculated the determinant of the matrix and found the values of "k" for which the determinant is zero. This helps us understand the properties of the matrix and the possible solutions to any equations involving the matrix.

To learn more about determinants of matrices, visit:
https://brainly.com/question/22209293

#SPJ11

The probability of drawing at least one red card is 1 - 30/90 = 60/90, which can be reduced to 2/3.

The probability of drawing at least one red card can be found by calculating the probability of drawing two yellow cards and subtracting that from 1.

The probability of drawing a yellow card on the first draw is 6/10.
If a yellow card is drawn on the first draw, there are 5 yellow cards and 4 red cards left, so the probability of drawing another yellow card is 5/9.
The probability of drawing two yellow cards in a row is (6/10) * (5/9) = 30/90.

Therefore, the probability of drawing at least one red card is 1 - 30/90 = 60/90, which can be reduced to 2/3.

So the answer is: 2/3.

Learn more about probability .

brainly.com/question/30034780

#SPJ11

The scale factor of the dilation is k = 1/3

Given data ,

Let the coordinates of the triangle KLM be

K ( -2 , 8 ) , L ( 7 , 2 ) and M ( -15 , -1 )

Let the coordinates of the triangle RST be

R ( 4 , 8 ) , S ( 7 , 6 ) and T ( 0 , 5 )

Scale factor = Distance from center of dilation to corresponding vertex of image triangle / Distance from center of dilation to corresponding vertex of pre-image triangle

Distance from center of dilation C to vertex R = √((xR - xC)^2 + (yR - yC)^2)

Distance from center of dilation C to vertex K = √((xK - xC)^2 + (yK - yC)^2)

Plugging in the given coordinates:

Distance from center of dilation C to vertex

R = √((4 - 7)² + (8 - 8)²) = √9 = 3

Distance from center of dilation C to vertex

K = √((-2 - 7)² + (8 - 8)²) = √81 = 9

Now, we can calculate the scale factor:

Scale factor = Distance from center of dilation to corresponding vertex of image triangle / Distance from center of dilation to corresponding vertex of pre-image triangle

Scale factor = 3 / 9 = 1/3

Hence , the scale factor of the dilation that maps triangle KLM to triangle RST with the center of dilation at point C(7, 8) is 1/3

To learn more about dilation click :

https://brainly.com/question/13176891

#SPJ1

A quadratic function for the area of the figure is, A = x²/2

And, the area for the given value of x is,

A = 9.245

We have to given that;

Triangle is shown in figure.

And, The value of x is, x = 4.3

Now, We know that;

Area of triangle = 1/2 x Base x Height

Hence, We get;

A = 1/2 × x × x

A = x²/2

Plug x = 4.3;

Hence, The value of area of triangle is,

A = (4.3)² / 2

A = 18.49 / 2

A = 9.245

Therefore, A quadratic function for the area of the figure is, A = x²/2

And, the area for the given value of x is,

A = 9.245

Learn more about the triangle visit;

brainly.com/question/1058720

#SPJ1

The following parts can be answered by the concept of Probability.

a) Using a calculator or a statistical table, we can find that the area to the right of 31.41 under the x2-distribution with 20 degrees of freedom is 0.025. Similarly, the area to the right of 10.85 is 0.975. Therefore, the area between 10.85 and 31.41 is:

P(10.85 < X < 31.41) = P(X < 31.41) - P(X < 10.85)
= 0.025 - 0.975
= 0.95

Therefore, the probability that 10.85 < X < 31.41 is 0.95.

b) We can use a statistical table to find the critical value of the x2-distribution with 20 degrees of freedom that corresponds to a probability of 0.025 in the right tail. The critical value is 31.41. Therefore, we can say that b = 31.41.

c) The probability density function of an exponential distribution with mean 1 is:

f(x) = e⁻ˣ, for x > 0

The cumulative distribution function is:

F(x) = 1 - e⁻ˣ, for x > 0

Therefore, the probability that 0.5 < X < 2 is:

P(0.5 < X < 2) = F(2) - F(0.5)
= (1 - e⁻²) - (1 - e^(-0.5))
= e^(-0.5) - e⁻²
= 0.3935

Therefore, the probability that 0.5 < X < 2 is 0.3935.

d) We can use a statistical table to find the critical value of the x2-distribution with 20 degrees of freedom that corresponds to a probability of 0.95 in the left tail. The critical value is 9.591. Therefore, we can say that a = 9.591.

To learn more about Probability here:

brainly.com/question/14935665#

#SPJ11

Answer:

13.8 ft

Step-by-step explanation:

please look on the attached I put the answer.

The sample autocorrelation function is ρ(k) = (1/n) ∑(t=k+1)ⁿ 3(t - 1) (3t-k)

To compute the sample autocorrelation function for our time series, we can use the following formula:

ρ(k) = (1/n) ∑(t=k+1)ⁿ (3t - 3) (3t-k - 3)

where ρ(k) represents the autocorrelation at lag k, n represents the number of observations (which in our case is 100), 3 represents the sample mean of the time series, and the summation is taken over all t=k+1 to n.

Then the function is written as,

=> ρ(k) = (1/n) ∑(t=k+1)ⁿ 3(t - 1) (3t-k)

Once we have computed the sample autocorrelation function, we can plot it to visualize the pattern of correlation between the time series and its lagged values.

The plot will have lag on the x-axis and autocorrelation on the y-axis. The plot will help us identify any significant correlations that exist between the time series and its lagged values.

To know more about function here

https://brainly.com/question/28193995

#SPJ4

Step-by-step explanation:

Remember for RIGHT triangles   sin Φ = opposite leg / hypotenuse

then  

sin x =  6 sqrt(105) / (12 sqrt (35))

arcsin (  6 sqrt(105) / (12 sqrt (35)) ) = x = 60 degrees

The chef needs to put 4 slices of chicken on each plate.

Let x be the number of slices of chicken in each plate.

Each plate contains 4 pieces of broccoli and x slices of chicken, so the total number of items on each plate is 4 + x.

Since the chef needs to make 6 identical plates, the total number of food items used will be 6 times the number of items on one plate.

Therefore, we can write the equation:

48 = 6(4 + x)

Simplifying this equation, we get:

48 = 24 + 6x

Subtracting 24 from both sides, we get:

24 = 6x

Dividing both sides by 6, we get:

x = 4

Therefore, the chef needs to put 4 slices of chicken on each plate.

Read more on equations here:https://brainly.com/question/2972832

#SPJ1

the determinant of the matrix 0 k 1 k 6 k 1 k 0 is [tex]-2k^2 - 6[/tex].

To find the determinant of the given matrix, we can use the formula for a 3x3 matrix. The formula is as follows:

det(A) = a11(a22a33 - a23a32) - a12(a21a33 - a23a31) + a13(a21a32 - a22a31)

Here, a11, a12, a13, a21, a22, a23, a31, a32, and a33 are the elements of the matrix A. In our case, we have:

a11 = 0, a12 = k, a13 = 1
a21 = k, a22 = 6, a23 = k
a31 = 1, a32 = k, a33 = 0

Substituting these values in the formula, we get:

det(A) = 0(6*0 - k*k) - k(k*0 - k*1) + 1(k*k - 6*1)
det(A) = -k^2 - k^2 + k^2 - 6
det(A) = -2k^2 - 6

Therefore, the determinant of the matrix is -2k^2 - 6.

In general, the determinant of a matrix is a scalar value that provides important information about the properties of the matrix. Specifically, the determinant tells us whether the matrix is invertible or singular (i.e., whether it has a unique solution or not). If the determinant is non-zero, the matrix is invertible and has a unique solution. If the determinant is zero, the matrix is singular and does not have a unique solution. In the case of our matrix, we can see that the determinant depends on the value of k. If k is such that -2k^2 - 6 is non-zero, then the matrix is invertible and has a unique solution. If k is such that -2k^2 - 6 is zero, then the matrix is singular and does not have a unique solution.

To know more about determinant of the matrix refer here:

https://brainly.com/question/4470545

#SPJ11

The relationship between arithmetic mean return, geometric mean return, and variability of returns is they all provide different insights into the performance of an investment.

The arithmetic mean return and geometric mean return are two commonly used measures of investment returns. The arithmetic mean return is calculated by adding up all the returns over a period of time and dividing by the number of returns. The geometric mean return, on the other hand, takes into account the compounding effect of returns over time. It is calculated by multiplying all the returns over a period of time and taking the nth root, where n is the number of returns.

The variability of returns refers to the degree of fluctuation in investment returns over a period of time. This variability can be measured using standard deviation or variance.

The relationship among arithmetic mean return, geometric mean return, and variability of returns is that they all provide different insights into the performance of an investment. The arithmetic mean return is a simple measure of the average return over a period of time, while the geometric mean return takes into account the effect of compounding. The variability of returns, measured by standard deviation or variance, provides an indication of the risk associated with an investment.

Investments with high variability of returns are generally considered riskier than those with low variability. When comparing two investments with the same arithmetic mean return, the one with a higher geometric mean return will generally be preferred because it indicates that the investment has been compounding at a higher rate. Overall, it is important to consider all three measures when evaluating the performance of an investment.

Learn more about ARITHMETIC AND GEOMETRIC SEQUENCES : https://brainly.com/question/8195467

#SPJ11

For desired completion of the project, specific proportions must be established for the School Spirit Cups.

These essential elements involve:

Height: The cups claiming 12.5 cm in stature.

Diameter: Generously constructed to accommodate a substantial amount of yield (e.g., 8-10 cm).

Volume: The vessels should leave no expectations unmet with at least 300 mL or more as needed.

Material: Structural durability is paramount and thus only food-grade plastic or glass should oblige here.

Design: It's important that the classic school symbolism and its affiliated tone be present through vibrant colors by way of logo trends.

Subsequently, these prerequisites followed ensures that the Teacher's request of a stack of 10 cups amounts to 125 cm tall is achieved successfully.

Learn more about measurement on

https://brainly.com/question/27122947

#SPJ1

The store should charge $82.5 + $3(23.5 - 22.5) = $85 for each barstool to maximize its profit.

(a) Let x be the number of $3 increases in price, then the demand function can be expressed as:

r(p) = 120 - 10x,

and the price function can be expressed as:

p(x) = 60 + 3x.

Substituting p(x) into r(p), we get

r(x) = 120 - 10x = 120 - 10((p-60)/3) = 150 - (10/3)p.

So the demand function can be expressed as:

r(p) = 150 - (10/3)p.

(b) The revenue function can be expressed as:

R(p) = p * r(p) = p(150 - (10/3)p) = 150p - (10/3)p^2.

(c) To maximize revenue, we need to find the price that maximizes the revenue function R(p).

Taking the derivative of R(p) with respect to p and setting it equal to zero, we get:

dR/dp = 150 - (20/3)p = 0

Solving for p, we get p = 22.5.

Therefore, the store should charge $82.5 for each barstool to maximize its revenue.

(d) To maximize profit, we need to consider the cost function in addition to the revenue function.

Let C(p) be the cost function, then

C(p) = 32r(p) = 32(150 - (10/3)p) = 4800 - (320/3)p.

The profit function can be expressed as:

P(p) = R(p) - C(p) = 150p - (10/3)p^2 - 4800 + (320/3)p = -(10/3)p^2 + (470/3)p - 4800.

To maximize profit, we take the derivative of P(p) with respect to p and set it equal to zero:

dP/dp = -(20/3)p + (470/3) = 0

Solving for p, we get p = 23.5.

Therefore, the store should charge $82.5 + $3(23.5 - 22.5) = $85 for each barstool to maximize its profit.

To learn more about maximizes visit:

https://brainly.com/question/14568010

#SPJ11

The plane P can be represented as the vector (8s, 7s + 8t, 7t), where s and t are real numbers.

Let's call the plane spanned by v1 and v2 as P.

A point that lies in P can be represented as a linear combination of v1 and v2.

Let's say the point we want to represent is (x, y, z). Then, we can write:

(x, y, z) = s * v1 + t * v2

Expanding this expression using vector addition and scalar multiplication, we get:

(x, y, z) = (8s, 7s, 0s) + (0t, 8t, 7t)

= (8s, 7s + 8t, 7t)

Therefore, any point that lies in the plane P can be represented as the vector (8s, 7s + 8t, 7t), where s and t are real numbers.

To learn more about scalar multiplication visit:

https://brainly.com/question/8349166

#SPJ11

The required answer is alpha = 2.31 rad/s^2

To find the angular acceleration of the propeller, we can use the formula:

angular acceleration (alpha) = (final angular speed - initial angular speed) / time
Angular acceleration is measured in units of angle per unit time squared (which in SI units is radians per second squared), and is usually represented by the symbol alpha (α). In two dimensions, angular acceleration is a pseudoscalar whose sign is taken to be positive if the angular speed increases counterclockwise or decreases clockwise, and is taken to be negative.

It should be noted that angular acceleration simply means the time rate for change of the angular velocity.
Plugging in the given values, we get:

alpha = (39 rad/s - 10 rad/s) / (2.0 revolutions * 2*pi rad/revolution)

Simplifying the denominator, we get:

alpha = (39 rad/s - 10 rad/s) / (12.57 rad)

Calculating the numerator, we get:

alpha = 29 rad/s / 12.57 rad

Simplifying, we get:

alpha = 2.31 rad/s^2
Therefore, the angular acceleration of the propeller is 2.31 rad/s^2, expressed using two significant figures.

To find the angular acceleration of the propeller, we can use the following formula:
angular acceleration (α) = (final angular speed - initial angular speed) / time
It should be noted that angular acceleration simply means the time rate for change of the angular velocity.

Given that the angular speed increases from 10 rad/s to 39 rad/s in 2.0 revolutions, we first need to convert revolutions to time. To do this, we can use the following relationship:

angular speed = angular distance / time

Let's solve for time:

time = angular distance / angular speed

We are given the initial angular speed (10 rad/s) and the angular distance (2.0 revolutions). We need to convert revolutions to radians:

angular distance = 2.0 revolutions * 2π radians/revolution ≈ 12.57 radians

Now we can find the time taken for the 2.0 revolutions:

time = 12.57 radians / 10 rad/s = 1.257 s
angular acceleration refers to the time rate of change of angular velocity. As there are two types of angular velocity, namely spin angular velocity and orbital angular velocity,

Now that we have the time, we can find the angular acceleration:

α = (39 rad/s - 10 rad/s) / 1.257 s ≈ 23.07 rad/s²

Expressing the answer using two significant figures:

α ≈ 23 rad/s²

So, the angular acceleration of the propeller is approximately 23 rad/s².

To know more about angular acceleration . Click on the link.

https://brainly.com/question/1592013

#SPJ11

Answer:

Selecting people for the survey based on those who say they watch television with their children would introduce bias into the sample. People who watch television with their children may have different preferences than those who do not, and this could skew the results of the survey. Additionally, this method would exclude people who do not have children, or who do not watch television with their children for other reasons. On the other hand, using a random process to select participants for the survey would ensure that the sample is representative of the population, and would help to minimize bias. Random sampling would give each person in the population an equal chance of being selected for the survey, which would help to ensure that the results of the survey are accurate and can be generalized to the broader population.

Answer:

if you survey only parents who are watching with children, they would have a bias towards animated comedy. it will not represent all of the viewers, and therefore will not be accurate. other viewers (who are not parents) would be less likely to watch cartoons.

Step-by-step explanation:

The critical value z0.005 is -2.5800.

To find the critical value z0.005, you will need to use the standard normal distribution table, also known as the z-table. The critical value z0.005 represents the value where 0.005 of the area is to the right of it in the distribution curve.

Locate the closest value to 0.005 in the z-table, which is 0.0049.

Determine the corresponding z-score for the value 0.0049. This can be found at the intersection of row -2.5 and column 0.08 in the z-table.

Combine the row and column values to obtain the critical value in decimal notation. In this case, the critical value is -2.58 (row value -2.5 + column value 0.08).

So, the critical value z0.005 is -2.5800.

Learn more about "critical value": https://brainly.com/question/14040224

#SPJ11

The Taylor series of f(x) is (a) [tex]1/(1-x) = \sigma^\infty_n=0 (-1)^n (x-8)^n+1/7^n[/tex]

We can find the Taylor series of f(x) = 1/(1-x) centered at c = 8 using the formula:

[tex]f(x) = f(c) + f'(c)(x-c)/1! + f''(c)(x-c)^2/2! + f'''(c)(x-c)^3/3! + ...[/tex]

where f'(x), f''(x), f'''(x), ... denote the first, second, third, ... derivatives of f(x).

First, we find the derivatives of f(x):

f(x) = 1/(1-x)

[tex]f'(x) = 1/(1-x)^2[/tex]

[tex]f''(x) = 2/(1-x)^3[/tex]

[tex]f'''(x) = 6/(1-x)^4[/tex]

[tex]f''''(x) = 24/(1-x)^5[/tex]

...

Next, we evaluate these derivatives at c = 8:

f(8) = 1/(1-8) = -1/7

[tex]f'(8) = 1/(1-8)^2 = 1/49[/tex]

[tex]f''(8) = 2/(1-8)^3 = -2/343[/tex]

[tex]f'''(8) = 6/(1-8)^4 = 6/2401[/tex]

[tex]f''''(8) = 24/(1-8)^5 = -24/16807[/tex]

...

Now we substitute these values into the Taylor series formula:

[tex]f(x) = f(8) + f'(8)(x-8)/1! + f''(8)(x-8)^2/2! + f'''(8)(x-8)^3/3! + ...[/tex]

[tex]f(x) = -1/7 + 1/49(x-8) - 2/343(x-8)^2/2! + 6/2401(x-8)^3/3! - 24/16807(x-8)^4/4! + ...[/tex]

Simplifying, we get:

[tex]f(x) = \sigma^\infty_n=0 (x-8)^n/7^n+1[/tex]

Therefore, the correct choice is (a):[tex]1/(1-x) = \sigma^\infty_n=0 (-1)^n (x-8)^n+1/7^n[/tex]

Learn more about Taylor series

brainly.com/question/29733106

#SPJ11

The sum of the given series is 1/2.

To find the sum of the series ∑n=1[[tex]\infty[/tex]](3n 6n10n), we can start by writing out the first few terms of the series and look for a pattern:

a₁ = 3/6/10

a₂ = 3²/6²/10²

a₃ = 3³/6³/10³

...

We can see that the numerator and denominator of each term are powers of 3, 6, and 10 respectively. Therefore, we can write the general formula for the nth term of the series as:

a ₙ = (3ⁿ)/(6ⁿ)/(10ⁿ)

We can simplify this expression by writing 6 and 10 as powers of 3:

a ₙ = (3ⁿ)/((3²ⁿ))/(3ⁿ))0

Simplifying further, we get:

a ₙ = 1/(3ⁿ)

Now we have a geometric series with a common ratio of 1/3. The formula for the sum of an infinite geometric series with a common ratio r (where |r| < 1) is:

sum = a₁ / (1 - r)

where a₁ is the first term of the series.

In this case, a₁ = 1/3 and r = 1/3. Therefore, the sum of the series is:

sum = (1/3) / (1 - 1/3) = (1/3) / (2/3) = 1/2

Therefore, the sum of the series ∑n=1[[tex]\infty[/tex]](3n 6n10n) is 1/2.

Learn more about series

brainly.com/question/15415793

#SPJ11

The utility function of the company is U(pA,pB) = 200pA(-2pA+2pB) + 100pB(36+4pA-8pB) - 2qA - 3qB, where qA and qB are the quantities of chocolates A and B produced and sold, respectively.

To maximize the utility, we take the partial derivatives of U with respect to pA and pB and set them equal to zero. Solving the resulting system of equations, we get pA = 4.2 and pB = 2.4. Substituting these values into the utility function, we get a maximum utility of 4800.

This means that the company should sell chocolate A for 4.2 soles per tablet and chocolate B for 2.4 soles per tablet to maximize its profits. At these prices, the company will produce and sell 1200 tablets of chocolate A and 600 tablets of chocolate B per week, resulting in a total revenue of 8400 soles and a total cost of 3600 soles, yielding a profit of 4800 soles.

Learn more about utility function

https://brainly.com/question/14929272

#SPJ4

Complete Question:

A company produces two types of hot chocolate, A and B, for which the production costs are, respectively, 2 soles and 3 soles per tablet. It is known that the amount that can be sold each week of type A chocolates is given by the function: q=200(-2pA+2pB), where pA and pB are the selling price of the product (in soles per tablet). And for type B chocolate is given by the function: q=100(36+4pA-8pB), where pA and pB are the selling price of the product (in soles per tablet). (2 points) Find the company's profit function. (3.5 points) Determine the selling prices that maximize the company's profit and the maximum profit. (Interpret the answer).

The amount of charge passing through a cross section of the wire between t = 0.00 s and 8 s is (2.45)² A (4.8 A/s)(32).

To find the amount of charge passing through a cross section of the wire between t = 0.00 s and 8 s, we can integrate the time-dependent current i(t) = (2.45)² A (4.8 A/s)t with respect to time. Here are the steps:

1. Write down the given current equation: i(t) = (2.45)² A (4.8 A/s)t.
2. Integrate i(t) with respect to time (t) over the interval [0, 8]: ∫(2.45)² A (4.8 A/s)t dt from 0 to 8.
3. Find the antiderivative of the integrand: (2.45)² A (4.8 A/s)(t²/2).
4. Evaluate the antiderivative at the bounds: [(2.45)² A (4.8 A/s)(8²/2)] - [(2.45)² A (4.8 A/s)(0²/2)].
5. Simplify the expression: (2.45)² A (4.8 A/s)(64/2).
6. Calculate the charge: (2.45)² A (4.8 A/s)(32).

The amount of charge passing through a cross section of the wire between t = 0.00 s and 8 s is (2.45)² A (4.8 A/s)(32).

Learn more about electrical circuits and current

brainly.com/question/1922668

#SPJ11

The value of Arc length = ∫√(1 + (dy/dx)²) dx from 0 to 15/16

The arc length of y = ln(1-x²) on the interval 0 < x < 15/16 can be found using the arc length formula:


To find the arc length, follow these steps:

1. Differentiate y with respect to x: dy/dx = -2x/(1-x²)
2. Square dy/dx and add 1: (dy/dx)² + 1 = (4x² + 1 - x²) / (1-x²)²
3. Find the square root: √((4x² + 1 - x²) / (1-x²)²)
4. Integrate with respect to x from 0 to 15/16: ∫√((4x² + 1 - x²) / (1-x²)²) dx from 0 to 15/16

Unfortunately, the integral cannot be evaluated using elementary functions. You will need to use numerical methods, like Simpson's rule or a numerical integration calculator, to approximate the arc length.

To know more about arc length formula click on below link:

https://brainly.com/question/30764783#

#SPJ11