Some people say the risk of hiv transmission from a healthcare provider (doctor, dentist, nurse, technician) is small. true or false? why?

Option (d) All of these is correct.

In an automatic AWD vehicle, normally one axle receives all the torque; when slippage occurs, 50 percent of the torque can be sent to the other axle by hydraulic, mechanical and electrical means.

AWD vehicle stands for All-wheel drive vehicle.

A vehicle with all-wheel drive (AWD) has a powertrain that can drive all of its wheels, either continuously or as needed.

When we say the torque distribution is 50/50 "in normal conditions," we imply that the moment of force applied to the front and rear wheels is equal when all wheels have the same adhesion.

In an automatic AWD vehicle normally one axle receives all the torque and sent to other axle by hydraulic, mechanical and electrical means.

So that's why when the spillage occurs, 50% of the torque can be sent to the other axle also by hydraulic, mechanical and electrical means.

Hence, Option (d) All of these is correct.

Learn more about AWD vehicles here https://brainly.com/question/14308410

#SPJ4

Use formula (F) = mass × acceleration.

In this case: acceleration = [tex]\frac{F}{2m}[/tex]

To find the accurate measurement of small cars, the teacher asks students to make all the measurements in centimeters.

Centimeters Measurements:

Inches measurements:

here, the cars are small objects.

The number of centimeters is always bigger,

because a centimeter unit is smaller than an inch unit, and it takes more of them when we are measuring.

Hence,

To find the accurate measurement of small cars, the teacher asks students to make all the measurements in centimeters.

Learn more about accurate measurement here:

https://brainly.com/question/4119127

#SPJ4

According to the Theory of Continental Drift, we can predict that:

Continental Drift can be defined as a hypothesis that was put forth, that the Earth's continents have moved over  time relative to each other and as the time goes its keeps on moving, increasing the distance between them.

Continental Drift makes the continents look like they have drifted across the ocean.

In conclusion, Our predictions are stated above.

Learn more about Continental Drift:https://brainly.com/question/394265

#SPJ1

The acceleration of the car that came to a stop from a speed of 16 m/s in a time of 2.3 seconds is -6.96m/s² (option D).

The acceleration of a moving substance can be calculated by dividing the change in velocity of the substance by the time.

Acceleration (a) = ∆V/t

Where;

a = -16m/s ÷ 2.3s

a = -6.96m/s²

Therefore, the acceleration of the car that came to a stop from a speed of 16 m/s in a time of 2.3 seconds is -6.96m/s².

Learn more about acceleration at: https://brainly.com/question/12550364

#SPJ1

Answer:

fluoride ion

Explanation:

electric charge of negative 1

The velocity of the third piece is mathematically given as

v=0.88m/s

Generally, the equation for conservation is  mathematically given as

[tex]m u=m_{1} v_{1 \mathrm{x}}+m_{2} v_{2 \mathrm{x}}+m_{1} v_{x}[/tex]

Here, is the mass of the grenade, [tex]m_{1}, m_{2}, m_{3}[/tex] the masses of the pieces after an explosion, and [tex]v_{1 \mathrm{x}}, v_{2 \mathrm{x}}[/tex] are velocities of the first and second pieces after the explosion.

[tex]m u_{1} &=m_{1} v_{1 x}+m_{2} v_{2 \mathrm{x}}+m_{3} v_{x} \\0 &=0+(0.2 \mathrm{~kg})((5 \mathrm{~m} / \mathrm{s})\\v_{x} &=\frac{-0.173 \mathrm{~kg} \cdot \mathrm{m} / \mathrm{s}}{0.3 \mathrm{~kg}} \\&=-0.578 \mathrm{~m} / \mathrm{s}[/tex]

the equation for conservation

[tex]m u=m_{1} v_{1 y}+m_{2} v_{2 y}+m_{3} v_{y}[/tex]

[tex]m u_{1} &=m_{1} v_{1 \mathrm{y}}+m_{2} v_{x y}+m_{3} v_{y} \\0 &=(0.10 \mathrm{~kg})(10 \mathrm{~m} / \mathrm{s})+(0.2 \mathrm{~kg})\left((5 \mathrm{~m} / \mathrm{s}) \cos 10^{\circ}\right)+(0.3 \mathrm{~kg}) v_{y} \\v_{y} &=\frac{-1.98 \mathrm{~kg} \cdot \mathrm{m} / \mathrm{s}}{0.3 \mathrm{~kg}} \\&=-0.661 \mathrm{~m} / \mathrm{s}[/tex]

In conclusion, the magnitude of the velocity

[tex]v=\sqrt{v_{\mathrm{x}}^{2}+v_{\mathrm{y}}^{2}}[/tex]

[tex]Substitute $-0.578 \mathrm{~m} / \mathrm{s}$ for $v_{\mathrm{s}}$ and $-0.661 \mathrm{~m} / \mathrm{s}$ for $v_{\mathrm{y}}$[/tex]

[tex]v &=\sqrt{v_{x}^{2}+v_{y}^{2}} \\&=\sqrt{(-0.578 \mathrm{~m} / \mathrm{s})^{2}+(-0.661 \mathrm{~m} / \mathrm{s})^{2}} \\&=0.88 \mathrm{~m} / \mathrm{s}[/tex]

v=0.88m/s

Read more about velocity

https://brainly.com/question/18084516

#SPJ1

The position in the graph between 4 - 6 seconds is the region of constant velocity.

The term constant velocity refers to the period in the graph when the velocity is not changing with time. As such, the graph is shown to be a flat portion at such a point.

Hence, it follows that the position in the graph between 4 - 6 seconds is the region of constant velocity.

Learn more about constant velocity:https://brainly.com/question/17014780

#SPJ1

The temperature of the plasma will increase as current is passed through it.

Current can be defined as a flow of charged particles through a medium and the particles includes: electrons or ions.

Temperature is the degree of hotness or coldness experienced by a material.

The more current passes through the plasma the more energy is induced making the particles to move faster which in turns causes temperature to increase and reducing the resistance of the plasma.

In conclusion, The current causes temperature to increase and this reduces the resistance.

Learn more about current: https://brainly.com/question/1100341

#SPJ1

A sign board supported by two strings does illustrate the tension-tension and weight in the free body diagram.

In a sign board supported by two strings, there will be tension in each strings and a force of weight downward due to the mass of the body. The tension of both strings will be in equilibrium to weight of the object.

There will be elastic force or spring force also we can say if a rubber band is being stretched by a person.

A torque will be applied on the door when pulled by two applied forces but there will be no tension.

If a book fall from a table then the book will go under free fall motion, hence there is no possibility of tension tension on the book.

Hence we can conclude that tension tension and weight force will only be there, where we will be having an object supported by strings, also go through the diagram attached for better understanding.

Learn more about free body diagram here:

https://brainly.com/question/10148657

#SPJ10

Answer:

6.71 meters per second squared

Explanation:

Speed vs velocity

Average acceleration is defined as the rate of change of velocity per unit of time.

Velocity is a vector, a quantity that has both direction and magnitude (size).  In this case, the cheetah is not changing directions, so we can ignore vector directions, and treat velocity as just speed.

[tex]a=\dfrac {\Delta v}{\Delta t}[/tex]

Analyzing units

The units of the acceleration requested are meters per second squared, and the units of speed and time are measured in meters per second, and seconds.

The units all match, so we just need to substitute and calculate/simplify

Calculations

[tex]a=\dfrac{(28.5[\frac {m}{s}])}{(4.25[s])}[/tex]

[tex]a=6.70588235294...[\frac {m}{s^2}][/tex]

Accounting for significant figures, the acceleration is 6.71 meters per second squared.

Answer:

Entropy is a measure of the order/disorder during the transformation of the state of a system and is defined as the total variation of energy at a defined temperature. From point of view of statistical mechanics, this variation of energy is generated from statistical transitions of the internal states of the system. In this sense, entropy can measure how easy it is to reach a defined state of the system. Now, imagine a text stream that arrives to you character by character in a screen. If the text is meaningless, then every character has the same probability of appearing to you and therefore the entropy is maximal because this disorder is maximal. If you want to transfer information, then you have to spend a little bit of energy in ordering the characters because this does not happen spontaneously. The final state of the system is more ordered in respect to the earlier one, so the entropy is less than the entropy of random text. This means that, if you want to reduce entropy in order to transfer information, then you must spend energy.

Explanation:

Answer: For entropy to decrease, energy must be added. (B)

Explanation: Trust me bbg c;

If you fly a spaceship to Vega at 0.999c, you will measure the distance to be much less than 25 light years.

Most space objects use light-years to represent their distance. Light-years are the distance that light travels during the year on Earth. Light-years are about 6 trillion miles (9 trillion km). This is a 6 followed by 12 zeros.

At the same speed, a movement equivalent to one light-year takes about 11.3 billion days. Life expectancy for Americans is currently estimated at 78.74 years, which is equivalent to 28,740 days. Therefore, to get there, you need to live about 400,000 times as long as the average American.

Learn more about light years here: https://brainly.com/question/1224192

#SPJ4

The energy change of the potato is 2 kJ.

Energy can trade from one shape to some other. As an example, when you turn on a lightbulb, electrical power adjustments to thermal electricity and light power. An automobile adjustments energy stored in the chemical bonds of gasoline to numerous specific paperwork.

The general electricity trade of the response this is the distinction among the reactant's power and the product's strength. If the reactants have extra energy than the goods, energy has been released. If the reactants have much less strength than the products, strength has been absorbed by way of the debris.

The electricity exchange that happens because the end result of a reaction relies upon on the difference among the power of the reactants and the energy of the products. For reactions like combustion, the gas (as an instance wooden) has strength saved inside the chemical bonds among the atoms that make it up.

Learn more about energy change here https://brainly.com/question/18345151

#SPJ4

The resonant frequency will decrease.

The natural frequency of an object, where it typically vibrates with a greater amplitude, is another way to describe the resonant frequency.

The formula for time period of pendulum(T) is

T= 2π[tex]\sqrt{} \frac{l}{g}[/tex] where,

l= length of pendulum

g = acceleration due to gravity

So, T is inversely proportional to the square root of g(√g)

It means as the value of g decreases, time period of pendulum increases and vice versa.

As it is given, value of g is less on moon than on earth and it is approx. 6 times less than that of earth.

That's why time period of oscillation of pendulum increases.

Now, as we know that time period is inversely proportional to the frequency.

So as the time period of pendulum on the moon increases, its resonant frequency decreases.

Hence, If we take a given pendulum to the Moon, where the acceleration of gravity is less than on Earth, the resonant frequency of the pendulum will decrease.

Learn more about pendulum here https://brainly.com/question/8168512

#SPJ4

The magnetic field is the type of zone that receives magnetic force. It can have a strength of 0.00122 T.

Provided that,

radius, r = 0.7 cm = 0.007 m

current, I = 125 A

position considered, x = 0.13 cm = 0.0013

[tex]B=u_{0}Ix/4\pi r^{2}[/tex]

⇒[tex]B=4\pi* 10^{-7} *125 * 0.0013 / 4\pi (0.007)^{2}[/tex]

⇒[tex]B=0.00033[/tex] T

So, the value of the magnetic field = 0.00033 T

Learn more about the magnetic field here:

https://brainly.com/question/24397546

#SPJ4

Answer:

448m/s

Explanation:

velocity =frequency × wavelength

v= 173×2.59

v=448.07

v=448m/s

Answer:

i)[tex]0m/s^{2}[/tex]

ii)20m/s

iii)300m

Explanation:

In this Velocity-Time graph,

i) The acceleration can be found by finding the slope of the graph, which in this case, since it is a horizontal line, the slope = 0 therefore the acceleration = [tex]0m/s^{2}[/tex]

ii)The velocity can be found on the y-axis, in this case, is 20m/s.

iii)The distance covered can be found by finding the area of the graph to the corresponding time. In this case,

t=15

Distance covered = 20m/s * 15s

= 300m

Acceleration :

Velocity :

Distance :

The final stabilized temperature will be between 0 °C and 50 °C.

The enthalpy of fusion of ice is 334 J/g. The specific heat of water is 4.2 J/g.

To cool 100 g of water from 100 °C to 0 °C would require the removal of

4.2 x 100 x 100 = 42000 J.

To melt the ice would require the addition of

334 x 100 = 33400 J

∴ 42000  > 33400 thus you can melt all the ice and have some heat to spare, specifically 42000 - 33400 = 8600 J

Now use this to warm up 100+100 = 200 g of water at 0 °C

The final stabilized temperature;

8600 / (200 x 4.2) = 10.23 °C

Therefore, the final stabilized temperature is 10.23 °C

Learn more about Calorimetry here:

https://brainly.com/question/1989313

#SPJ4

The magnitude of the bird's eastward component is 158.6 m and its flying speed is 19.95 m/s.

The eastward component of the bird is calculated as follows;

226² = E² + 161²

E² = 226² - 161²

E² = 25,155

E = √25,155

E = 158.6 m

V = 158.6 m / 7.95 s

V = 19.95 m/s

Thus, the magnitude of the bird's eastward component is 158.6 m and its flying speed is 19.95 m/s.

Learn more about eastward components here: https://brainly.com/question/24708098

#SPJ1

The cost of boiling 500cm3 of water using the 3kW kettle is 1.35 P.

The cost is calculated as follows;

1 unit = 9p /kWh

Total energy consumed by 3 kW kettle, E = P x t

where;

E = 3 kW x (3 mins/60 mins/hr)

E = 0.15 kWh

Energy cost = 9 p/kWh x 0.15 kWh = 1.35 P

Thus, the cost of boiling 500cm3 of water using the 3kW kettle is 1.35 P.

Learn more about energy cost here: https://brainly.com/question/13795167

#SPJ1

Light bends when it travels from a certain density of matter into a different density of matter. The density of the stuff affects how much it bends. Light bends when it transitions from air to water or from water to air. Light bends when it travels from water to glass or from glass to air. How much light is bent by a particular substance may be determined by its index of refraction. However, Snell's Law and the angle of incidence must be coupled. The angle of refraction increases with increasing angle of incidence. As a result, the water's unique index of refraction bends light entering the medium at an angle of 30°. and that is 1.33.  This means that light in a vacuum travels at 1.33 times faster than light in water. We wouldn't have lenses in the way we do now without refractive index. We would need eyes with pinhole-sized openings in order to see, which would prevent us from seeing clearly or at least in great detail. We wouldn't have had microscopes to view anything in great detail, telescopes to view the moon, planets, or distant things. I could go on, but I think you get the idea: if we didn't have the material characteristic known as refraction, things would be quite different. Well, I guess it's possible that human eyes have evolved to have diffractive lenses, but that's another theory.

________________________

The ability of a substance, whether it is solid, liquid, or gas, to reflect light causes it to move more slowly than it would in a vacuum.

Any substance's refractive index (n) is found by dividing the speed of light in that substance by the speed of light in a vacuum (c) (v).

So

n = c/v

Since a material's refractive index varies depending on the wavelength of light, n = f(wavelength) (n is a function of wavelength). In comparison to longer wavelengths, the index is larger for shorter wavelengths. It's known as dispersion.

When creating lenses or other refractive optical systems, the refractive index and dispersion are both crucial factors. The diverse wavelengths don't come to a common focus, which has a disastrous effect on image quality because index is directly related to how light bends while passing through a lens. We refer to this as chromatic aberration. It's difficult to regulate, but you can achieve it by carefully selecting various glass chemistries and massaging them into position. The glass map showing index as a function of inverse dispersion is seen in the image below. About 20 to 100 is the range of the Abby number, a measure of dispersion; lower numbers indicate more dispersion (larger index difference between red and blue light). Every dot stands for a distinct glass.

Refractive indices range from 1.0003 for air, to over 4.5 for Geranium.

Potential energy , Kinetic energy

Kinetic energy is a form of energy that posses by an object due to its motion. If work, which transfers energy, is done on an object by applying a net force, the object speeds up and thereby gains kinetic energy.

Potential energy is the energy held by an object due to its position relative to other objects, stresses within itself, its electric charge, or other factors.

According to given condition,

At first,

When a ball is at the top of a hill , it posses a potential energy because the ball is at some height from the surface  where  the energy held by ball is due to its position.

That is why,  a ball at the top of a hill is an example of Potential energy.

Secondly,

When a ball is rolling down the hill , it posses kinetic energy because the ball have some energy that posses by an object due to its motion.

That is why, a ball rolling down the hill is an example of  Kinetic energy.

Learn more about Potential energy and Kinetic energy here:

https://brainly.com/question/11749818

#SPJ1

B. The force of X on Y is is approximately 13 N [right].

The action-reaction forces that the blocks exert on each other is calculated as follows;

Net force on the blocks = 40 N - (8 N + 4 N) = 28 N

Total mass of the blocks = 10 kg + 5 kg = 15 kg

a = F(net)/M

a = 28 N / 15 kg

a = 1.867 m/s²

40 N - 8N - T = 10 x 1.867

T = 13.33 N

40 N - 4N - T = 5 x 1.867

T = 26.67 N

Thus, the force of X on Y is is approximately 13 N [right].

Learn more about net force here: https://brainly.com/question/14361879

#SPJ1

The person's velocity relative to the shore is determined as 6.5 m/s.

The velocity of the person is calculated as follows;

V(p/f) = V(p) - V(f)

where;

1.5 = V(p) - 5

V(p) = 6.5 m/s

Thus, the person's velocity relative to the shore is determined as 6.5 m/s.

Learn more about relative velocity here: https://brainly.com/question/17228388

#SPJ1

Answer:

If u mean a comet, then Edmund Halley should be the person you're looking for.

The approximate de Broglie wavelength of a tennis ball is 9.4×10^(-34) m.

What is the de Broglie wavelength:

It is the wavelength that is associated with an object in relation to its momentum and mass is known as de Broglie wavelength.

A particle's de Broglie wavelength is usually inversely proportional to its force.

The formula of de Broglie wavelength:

here mass of a tennis ball is given

mass, m=70 g = 0.07 kg

ball is moving with velocity

v = 10 m/s

h is Plank constant,

h=6.63×10^(-34) Js

substituting the values in formula,

λ = 6.63×10^(-34) / ( 0.070*10)

λ = 9.4 ×10^(-34) m

Hence

The approximate de Broglie wavelength of a tennis ball is 9.4×10^(-34) m

Learn more about de Broglie wavelength here:

https://brainly.com/question/17295250

#SPJ4

The strategy:

The Toro Co. uses a family branding strategy.

What is family branding?

Family branding is a marketing tactic that emphasizes promoting the parent brand name while simultaneously advertising a family of goods and services. It is also sometimes referred to as "umbrella branding," which implies that all branding initiatives are carried out under the parent brand name.

In this case, the parent brand is Toro. The "Toro Motor Company" was founded in 1914 with the goal of producing tractor engines for The Bull Tractor Company. By acquiring Whirlwind Corp., Toro joined the push mower industry in 1948.

All the stated types of machinery are provided under the name of Toro, suggesting that the parent brand name is used to promote sales.

Thus, it is a case of family branding.

To know more about The Toro Co. refer to:

https://brainly.com/question/15971507

#SPJ4

The speed of light when it passes through the new type of glass is 2.04×10^8  m/s.

What is refractive index:

Refractive Index is a value calculated from the ratio of the speed of light in a vacuum to that in a second medium of greater density.

The refractive index variable is denoted by the letter ' n '.

Here,

The refractive index of a new type of glass is 1.47

n = 1.47

The speed of light in air is c = 3×10^8 m/s

The formula for refractive index:

where v is the speed of light in new type of glass.

Substituting the values into the equation,

1.47 = 3×10^8 / v

v = 3×10^8 / 1.47

v = 2.04 ×10^8  m/s

Hence,

the speed of light when it passes through the new type of glass is 2.04×10^8  m/s

Learn more about refractive index here:

https://brainly.com/question/20320680

#SPJ4