solid iron(ii) oxide reacts with carbon monoxide gas to form solid iron and carbon dioxide gas.

The relationship between the concentration and the rate of the reaction is positive (option A).

Rate of reaction or reaction rate is the speed at which a chemical reaction takes place, defined as proportional to the increase in the concentration of a product per unit time and to the decrease in the concentration of a reactant per unit time.

According to the collision theory, the rate of reaction increases with the increase in the concentration of the reactants.

The reaction rate is said to be increased when the formation of products is favoured.

In a positive relationship both variables tend to move in the same direction: If one variable increases, the other tends to also increase. If one decreases, the other tends to also.

Therefore, concentration and rate of reaction can be said to be in a positive relationship with one another.

Learn more about rate of reaction at: https://brainly.com/question/8592296

#SPJ1

Heat energy is absorbed to boil the water at atmospheric pressure is 6.506kJ.

Atmospheric pressure, also known as barometric pressure, is the force per unit area exerted by an atmospheric pressure column (that is, the total mass of air over a given area). Atmospheric pressure can be measured with a mercury barometer . This gives the height of the mercury column exactly in balance with the weight of the atmospheric column above the barometer.

Atmospheric pressure is also measured using an aneroid barometer. In this case, the sensing element is one or more hollow, partially evacuated, corrugated metal discs supported against collapse by internal or external springs. Changes in the shape of the disc due to changes in pressure can be recorded with a pen arm and a clock-driven rotating drum.

Calculation :

Step : 1

Calculate the number of moles of water as follows :

[tex]Number of moles of water = \frac{mass}{molar mass}[/tex]

                                        [tex]= \frac{2.88g}{18.0g/mol}[/tex]

                                        [tex]= 0.16mol[/tex]

Step 2 :

Now, calculate the heat energy absorbed to boil the water at atmospheric pressure is as follows :

[tex]Q = n*[/tex]Δ[tex]H_{vap}[/tex]

   [tex]= 0.16 mol * 40.66 kJ/mol[/tex]

   [tex]= 6.506 kJ[/tex]

Learn more about Atmospheric Pressure here :

https://brainly.com/question/3083348

#SPJ4

The most likely reason for colloidal dispersion is electrostatic repulsion.

When two charged particles, whether positively or negatively, approach one another, they repel one another. Electrostatic repulsion is the term used in the case.

The interaction of the electrical double layers around the particles or droplet causes electrostatic repulsion. Repulsion happens when charged colloidal particles in a dispersion become close to one another and the double layers start to overlap (the particle separation is now less than twice the double-layer extension). Since there isn't enough room for complete potential decay, the individual double layers can no longer evolve without restriction.

know more about colloidal particles here

https://brainly.com/question/11640006#

#SPJ4

3.12 moles NaOH  are contained in 15.2l of a 0.205m NaOH solution

15.2 x 0.205 = 3.116 moles. By rearranging the equation, you must first determine how many moles are there in this solution. False. Molarity (M) x Volume (L) equals 15.2 x.205, or 3.12 moles.

Molarity (M), which is determined by dividing the solute's mass in moles by the volume of the NaOH  solution in liters, is the most often used unit to represent NaOH solution concentration: liters of solution/moles of solute equals M. One liter of a NaOH  solution with a 1.00 molar concentration (1.00 M) contains 1.00 moles of solute.

learn more about moles here:

https://brainly.com/question/15356425

#SPJ4

Answer:

twice

Explanation:

The pOH of the resulting solution is 1.38 as the resulting solution is basic in nature.

M HCl= 0.250 M

M NaOH= 0.250 M

V HCl=25.0 ml

V NaOH=35.0 ml

In order to calculate the pOH of the solution,

M mix= 0.250x25*0.250x35/25+35

M mix=6.25-8.75/60

=2.5/60

=0.0416 M

The solution will be more basic as the milliequivalent of the base is more., thus calculate pOH.

pOH or potential of hydroxide ion is a scale used to determine the hydroxide ion (OH–) concentration in a solution.

[OH-]=Mxnx∝

[OH-]=0.04167x1x1

[OH-]=0.04167 M

pOH=-log[OH-]

pOH=-log 4.167x10^-2

pOH=2-log 4.167

pOH=2-0.62

pOH=1.38

To learn more about concentration check the link below:

https://brainly.com/question/14469428

#SPJ4

BH3,CH4,PCl5,and H2 have zero dipole moment whereas the H2O and HF have permanent dipole moment.

what is dipole moment?

The bond dipole moment is the moments but property of the chemical bond that is used to measure the polarity of the bond within a molecule.

BH3 a non-polar molecule owing to its symmetric structure.

CH4 forms a regular tetrahedral structure and has very small electronegativity difference between the atoms that cancels out each other due to their directional vectors. Thus CH4 is non polar.

PCl5 is made up of polar P−Cl bonds that form a trigonal bipyramidal molecular which is arranged symmetrically thus the PCl5 molecule is nonpolar.

H2O is a polar compound with a bent shape, which is the reason for the polarity of the compound.

HF is a polar molecule owing to higher electronegativity difference and no other bonds to cancel the polarity thus formed.

H2 is a diatomic molecule and hence it is non-polar.

Thus, the atoms that possess dipole moments are H2O,HF .

learn more about dipole moment:

https://brainly.com/question/14140953

#SPJ4

It is crucial to be able to extend out a line diagram to a condensed formula, therefore the first step in this process.

The next step is to begin sketching the various scenarios as we switch out one hydrogen on a propane cylinder for a chlorine atom. It should be obvious that there are only two options for chlorinating propane: C-1 or C-2 (chlorination at C-3 would give the same product as that at C-1).

Monochlorination means the addition of a chlorine atom. When chlorine atom is added to the below structure. Chlorine will substitute at one of the hydrogens.

Constitutional isomers of these two substances are 1-chloropropane and 2-chloropropane.

To learn more about Chloropropane visit:

https://brainly.com/question/26166842

#SPJ4

The ph and % association of a 0.005427 m solution of triethylamine [a monoprotic weak base, n(ch2ch3)3 is 11.92

Given trimethyl amine as B

                             B + H2O      \Leftrightarrow           BH+ + OH-    

I                    0.005427                           0           0

C                    -X                                    + X          + X

E                  0.005427 -X                      +X          +X

pKa = 10.72

-logKa = 10.72 ; Ka = 10-10.72   = 1. 905 x 10-11

We know Ka x Kb = Kw = 1.0 x 10-14

Kb = Kw/Ka = 1.0 x 10-14 / 1.905 x 10-11 = 0.5249 x 10-3

From the equation Kb = [BH+] [OH-]/[B]

0.5249 x 10-3  = X x X / 0.005427-x

From the above equation X  = 0.1687 x 10-2M

[OH-] = 0.1687 x 10-2 M

pOH = -log [0.1687 x 10-2 ] = 2 + 0.773 = 2.0773

pH + pOH = 14

pH = 14-pOH = 14-2.0773 = 11.92

learn more about triethylamine here :

https://brainly.com/question/6656927

#SPJ4

The balanced net ionic equation is as follows;

                          Fe(OH)₃ + H₂SO₄---> Fe₂(SO₄)₃+ H₂O

The transformations that take place as a result of a chemical reaction are represented by an equation called a chemical equation. The following is the standard format for a chemical equation:

Reactants -----> Products

One example of a straightforward chemical reaction is the formation of water through the combination of hydrogen (H₂) and oxygen (O₂) in the atmosphere (H₂O). Hydrogen and oxygen are the reactants in this reaction, and the result of the reaction is water. In order to create the chemical equation for this reaction, you would first start by writing the reactants on the left and the product on the right, with an arrow connecting the two to represent the direction in which the reaction occurs.

Want to know more about chemical equations visit the link which is given below;

https://brainly.com/question/28294176

#SPJ4

The volume of bromine that is required to react with 165 liters of chlorine gas is 49.8 L.

(1) volume of chlorine=33.8 liters

Given reaction equation: Br2(g)+Cl2(g) -> 2BCl(g)

In case of gases, molar ratio can be expressed in terms of volume occupied by each gas at constant temperature and pressure.(volume is directly proportional to number of moles of gas).

According to the balanced reaction, moles of bromine =moles of chlorine=33.8 L

Hence volume of bromine required = 33.8 litres

(2)according to given reaction:

2BrF3 (g) -> Br2(g)+3F2(g)

total moles of product =4

reactant=2

Hence ratio of moles of reactant: product=2:4 i.e., 1:2.

so, total volume of product = 2 * volume of reactant(BrF3)=2*24.9L = 49.8 liters

To learn more about temperature check the link below:

https://brainly.com/question/24746268

#SPJ4

The information in which molecular formula helps to provide is the number and kind of electrons present in a molecule.

The correct answer choice is option d.

A molecular formula is a formula which which helps to give information about the characteristic feature of an molecules as to the number and kind of electrons present in it.

A molecule is a substance which can normally exist alone and still retain the chemical properties of that substance.

In conclusion, we can now confirm from the explanation given above that molecular formula helps to to understand the constituent of a molecular substance.

Read more on molecular formula:

https://brainly.com/question/13058832

#SPJ1

The electrical charge of an electron in coulombs is -1.602176634 x 10^-19

A negatively charged subatomic particle known as an electron can either be free or attached to an atom which is not bound. The coulomb (C) is the unit of electric charge in the International System of Units (SI). It is defined as the charge transported by a constant current of one ampere in one second. The charge of an electron is a fundamental matter property and it is responsible for various electrical and magnetic phenomena observed in the world around us.

The magnitude of the charge of an electron is very small, but it is the fundamental unit of electric charge in the SI system. The charge of an electron is a fixed, invariant property of the electron, and it is one of the fundamental constants of nature. The electrical charge of an electron is -1.602176634 x 10^-19 coulombs (C), which is a fundamental constant in physics, and it is the same for all electrons.

Read more about electrons on:

https://brainly.com/question/14883364

#SPJ4

The 0.118 moles are the mass Iron(III) oxide reacts with carbon monoxide gas to form solid iron metal and carbon dioxide gas: Fe2O3+3CO→2Fe+3CO2.

Limiting and Excess Reactants:There are sorts of reactants which can be utilized in a chemical response process, those are the proscribing reactant and the extra reactant. There is continually a leftover quantity of the extra reactant after a response. The most quantity of merchandise that may be produced relies upon at the proscribing reactant.

First, we convert the loads of the reactants into moles the usage of their molecular weight:

Solving for moles of Fe2O3, nFe2O3,

nFe2O3=mFe2O3MWFe2O3=23.0g159.69gmolnFe2O3=zero.144molesSolving for moles of CO, nCO,nCO=mCOMWCO=15.4g28gmolnCO=zero.55molesIn figuring out the proscribing and extra reactants, we decide the moles required for every reactant if we used all of the given moles adjusted consistent with their mole ratio withinside the balanced response.

The moles ecess reactant =nCO−nCOx=zero.fifty five−zero.432=0.118 molThe mass of the extra reactant left is calculated the usage of its moles and molecular weight,

massexcessreactantleft=mCO×M.

Read more about moles:

https://brainly.com/question/15356425

#SPJ4

The sucrose is actively transferred to the partner cells, and it diffuses from the companion cells to the sieve tube elements through the plasmodesmata.

As a result, the sucrose concentration in the sieve tube components rises. The same leaf vein receives water through osmosis from the neighboring xylem. The hydrostatic pressure on the sieve tube components rises as a result. Sucrose and other substances are forced through the sieve tube cells by hydrostatic pressure. Water is forced out of the sieve tube cells by osmosis, which reduces the hydrostatic pressure inside the cells. As a result of the entrance of sugars in sieve elements at the source and the elimination of sucrose, the pressure gradient is thus established.

To know more about hydrostatic pressure please click on the link brainly.com/question/14314763

#SPJ4

Suppose that 0.08 m^3 of a gas has a gauge pressure of 2 atm and a temperature of 300 k. Approx 27 x 10^20 molecules are there in the gas.

To find the number of molecules in the gas, we can use the ideal gas law equation:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

In this case, we know that the pressure is 2 atm, the volume is 0.08 m3, the temperature is 300 K, and the ideal gas constant is 8.31 J/mol*K. We can solve for the number of moles by rearranging the equation and substituting the known values:

n = (PV) / (RT)

= (2 atm * 0.08 m3) / (8.31 J/mol*K * 300 K)

= 0.0046 mol

Since there are Avogadro's number (6.022 x 10^23) of molecules in one mole of a substance, the number of molecules in the gas is:

Number of molecules = number of moles * Avogadro's number

= 0.0046 mol * 6.022 x 10^23 molecules/mol

= 27 x 10^20 molecules

Therefore, there are approximately 27 x 10^20 molecules in the gas.

To know more about molecules please refer: https://brainly.com/question/19556990

#SPJ4

Answer: 2.)black

3.)red

4.)yellow

5.) I don't know I am very sorry

6.) I don't know I am very sorry

7.) light blue

8.) purple

9.) dark green

10.)purple

Any process that modifies the number of protons or neutrons in an atom's nucleus is considered a nuclear transmutation. Therefore, modification in the number of protons or neutrons in an atom's nucleus is considered a nuclear transmutation.

When two nuclei or a nucleus and an outside subatomic particle meet, it is known as a nuclear reaction and one or more new nuclides are created.

Nuclear reactions, where a nucleus and an outside particle interact, or radioactive decay, where no outside cause is required, can both result in a transmutation.

Therefore, modification in the number of protons or neutrons in an atom's nucleus is considered a nuclear transmutation.

To know more about  nuclear reaction, here:

https://brainly.com/question/3246846

#SPJ1

I put the burning metal into a crucible and then collected the product.

The mass of 8.50 × 10²² NH₃ molecules is ≈ 1.84 g.

Solution:

Number of molecules = 8.50 × 10²² = 8687

Number of molecules = Number of moles × Avogadro's Number

8687 = Number of moles × 6.02×10^23

Number of moles = 8687\ 6.02×10^23 = 1443×10^-23 moles

Mass = Number of moles × Molar Mass = 1443×10^-23 × 17.031 = 24576×10^-23 = 2.4576×10^-18 g.

A quantitative measure of inertia, a fundamental property of all matter. In effect, it is the resistance that an object offers to changes in velocity or position when a force is applied. The greater the mass of an object, the smaller the change caused by an applied force.

Learn more about The mass here:- https://brainly.com/question/19385703

#SPJ4

There will be twice quite so many OH ions as Ba(OH)2 molecules, with an OH- concentration of 1.5 M near the end.

Barium hydroxide, also known as baryta, has the formula Ba(OH)2. There is no odour to this clear white powder. It is naturally poisonous. It is ionic in nature; for example, in aqueous solution, Ba(OH)2 could provide two hydroxide ions for every molecule.

Given,

[Ba(OH)2] = 0.75 M

To find,

[H⁺] = ?

[OH⁻] = ?

pH = ?

pOH = ?

1. Identify the [H+]

If [H+] equals [Ba(OH)2, then [H+] = 10^13.8 = 1.58 M.

2. Calculate the pOH

pOH = - log[OH]

Substitution

pOH = - log(1.5)

Result

pOH  = 0.17

3.- Calculate the pH

Formula

pH + pOH = 14

Find a solution for pH

pH = 14 - 0.17

Result

pH = 13.8.

To know more about the Ions, here

https://brainly.com/question/9819607

#SPJ4

The quantity of solute in a given amount of solution is referred to as a solution's concentration, and a suitable concentration must be maintained to regulate reaction activity.

When researching chemical processes, a solute's concentration is crucial because it affects how frequently molecules collide in solution, concentration which indirectly affects the speeds of reactions and the conditions at equilibrium. One of three methods can be used to calculate the concentration percentage: (1) dividing the solute's mass by the solution's mass; (2) dividing the solute's volume by the solution; or (3) dividing the solute's mass by the solution's volume.

learn more about concentrations here:

https://brainly.com/question/26255204

#SPJ4

Kurt Lewin's theory that emphasizes the reaction of an object is the result of the forces acting upon it is the field theory.

The field theory is a psychological theory that examines the patterns of interaction between the individual and their environment. The concept was developed by Kurt Lewin in the 1940s. According to the theory, an action of the person or a change in the environment that resulted by said action can be considered behavior.

The field theory emphasized the importance of individual personalities, situational variables, and interpersonal conflict. An object's reaction is the result of all the forces that has been acting upon said object.

Learn more about Kurt Lewin at https://brainly.com/question/28191594

#SPJ4

122 L of oxygen is produced at STP when water is decomposed to the reactants. here decomposition reaction occurs.

Decomposition Reaction is the process or effect of simplifying a single chemical entity into two or more fragments. Chemical decomposition is usually regarded and defined as the exact opposite of chemical synthesis. Decomposition reaction of water can be written as,

        2H2O  → 2H2 + O2

Oxygen is produced at STP when 6.58 x 1024 molecules of water is decomposed. So there will be,

      0.5 × 6.58 × 1024

     = 3.29 × 1024  O2 molecules.

1mole = 6.02×1023 particles, so the amount produced is:

     = 3.29×1024 / 6.02×1023

     = 5.47mole

At an STP of 273K, 1atm the volume is 22.4L/mole

So the volume of oxygen is 5.47 × 22.4 = 122L

To learn more about Decomposition Reaction please visit:

https://brainly.com/question/27300160

#SPJ4

The overall reaction for given chemical equations is A₂ + B[tex]\rightarrow[/tex] C+ F ,the rate determining step is equation 1 as its is slow step and rate of reaction is increased by increasing the temperature or adding a catalyst.

Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.

The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.

Learn more about chemical equation,here:

https://brainly.com/question/28294176

#SPJ1

The stage in star life cycle  in which hydrogen is the primary fuel for nuclear fusion is Main sequence.

The same natural cycles that apply to living things also apply to stars. This cycle starts with birth, develops over the course of a lifespan marked by change and growth, and culminates in death. The life cycle of a star, which lasts for billions of years, is completely different from the life cycle of a living thing.

When the core temperature reaches the necessary level, fusion can start during the main sequence phase of development. The hydrogen protons undergo this transformation into helium atoms. An enormous quantity of energy is released from the core of a main-sequence star as a result of this exothermic reaction, which produces more heat than it consumes.

To learn more about Main sequence refer here:

https://brainly.com/question/29315776#

#SPJ4

The student then mixes in 20ml of NaOH into the solution. The resulting mixture has a ph of 1.8. 0.135 M was the concentration of the NaOH solution that was added to the HCl.

To determine the concentration of the sodium hydroxide (NaOH) solution that was added to the hydrochloric acid (HCl) solution, we need to know the volume of the NaOH solution and the resulting pH of the mixture. The pH of a solution is a measure of its acidity or basicity. It is defined as the negative logarithm of the concentration of hydrogen ions (H+) in the solution. The concentration of H+ ions is directly related to the concentration of the acid (for an acidic solution) or the concentration of the base (for a basic solution).

In this case, we are given that the resulting mixture has a pH of 1.8 and that 20 mL of NaOH was added to the HCl solution. We can use the pH of the mixture and the volume of the NaOH solution to calculate the concentration of the NaOH solution as follows:

First, we need to convert the pH of the mixture to the concentration of H+ ions. To do this, we can use the formula:

[H+] = 10^(-pH)

Plugging in the value for pH, we get:

[H+] = 10^(-1.8)

= 0.135 M

Next, we need to use the volume of the NaOH solution and the concentration of H+ ions to calculate the concentration of the NaOH solution. Since the NaOH solution neutralized the HCl solution, the concentration of H+ ions in the mixture must be equal to the concentration of the NaOH solution. Therefore, the concentration of the NaOH solution is 0.135 M.

Therefore, the concentration of the NaOH solution that was added to the HCl solution is 0.135 M.

To know more about NaOH please refer: https://brainly.com/question/29854404

#SPJ4

Answer:

The nucleus is surrounded by a double unit membrane from all sites. The chromosomes and genes which have genetical characters and transmit from one generation to another are found in the nucleus.

Explanation:

The molecular size of something like the unidentified molecule is 44.1 since it is calculated as earth's weight metric kilogram of the electrons needed to make one molecule per mole. Molar mass is expressed in grams for mole.

What is the name for molecular weight?

Molecular weight, commonly known as molecular mass, is the concentration of a particular chemical molecules, calculated using the atomic weight of carbon-12, which is 12. In actuality, it is determined by adding the atoms' atomic weights.

How do physical properties and chemical weight compare?

Additionally, the primary distinction between the two is whether mole ratio provides the amount of a mole of a certain material. In contrast, molecular weight refers to a substance's molecule's mass. Although number of moles has a separate definition and measurement system

Briefing:

rate = distance / time

let consider both travelled a distance d.

So,  rate of Unknown gas   = d / 16.6 min

       rate of  He  = d / 5.00 min

  From Grahams law of effusion,

     rate1(Unknown gas ) / rate 2 (He) = √ MW 2 (He) / MW1 (Unknown) , MW = molecular weight

(d / 16.6 min) / (d / 5.00 min) = √ MW (He) / MW(Unknown)

0.301 = √ MW (He) / MW(Unknown)

(0.301)² = MW (He) / MW(Unknown)

 MW(Unknown) = MW(He)  / (0.301)²

                          = 4 / (0.301)²

                          = 44.1

To know more about molecular weight visit:

https://brainly.com/question/27988184

#SPJ4