Snakes and similar animals are members of a group called reptiles.

How do reptiles differ from other animals?

Answers

Answer 1

Answer:

They have skin covered with scales.


Related Questions

2. If a person in a wheelchair wanted to get to the second story of a two-story building, would it be easier to
take a short, steep ramp or a long, shallow ramp? Explain.

Answers

Answer:

The short steep ramp would be much harder because you will have to work more against gravity.

Explanation:

The long shallow ramp would be easier to take than the short, steep ramp because the person would have to use more force on the short, steep ramp to push the wheelchair against the force of gravity.

What is an inclined plane?

An inclined plane or a ramp can be defined as a flat supporting surface tilted at an angle, with one end higher than the other, utilized as an aid for raising or lowering a load.

The inclined plane can be defined as one of the six classical simple machines developed by Renaissance scientists. Inclined planes can be utilized to move heavy loads over vertical obstacles.

Moving a body up an inclined plane needs less force than lifting it straight up, at a cost of an increase in the distance moved. The mechanical advantage, the factor by which the force is decreased, is equal to the ratio of the sloped surface's length to the height it spans.

The inclined plane provides the same amount of work to be done with a smaller force exerted over a greater distance. The angle of friction or the angle of repose can be defined as the maximum angle at which a load can rest motionless on an inclined plane because of the friction without sliding down.

Learn more about Inclined plane, here:

https://brainly.com/question/14983337

#SPJ2

Calculate the density of an object using the following information: Mass = 50 grams and the initial water level is 30-ml in a graduated
cylinder, but rose to 40-ml after the object was dropped into it.

Answers

The density of an object = 5 g/ml

Further explanation  

Density is a quantity derived from the mass and volume  

Density is the ratio of mass per unit volume  

The unit of density can be expressed in g/cm³ or kg/m³  

Density formula:  

[tex]\large {\boxed {\bold {\rho ~ = ~ \frac {m} {V}}}}[/tex]

ρ = density  

m = mass  

v = volume  

Mass = 50 g

Volume of the object =

[tex]\tt 40-30=10~ml[/tex]

So the density :

[tex]\tt \rho=\dfrac{50}{10}\\\\\rho=\boxed{\bold{5~g/ml}}[/tex]

A worker is melting samples of various metals. Which sample will require the most heating to melt?
(check upload for chart)
A.
1 kg of aluminum
B.
2 kg of nickel
C.
3 kg of silver
D.
5 kg of tin

Answers

3kg of silver is the answer

An object is either copper or brass. The density of copper is 8.96g/ml. The density of brass is 8.73g/mL. I find that my object is 10.08
and has a volume of 1.15mL. What is my object made of?
Your answer:
O Copper
O Brass
O Cannot tell from the information given

Answers

I like pp hehehehehe hehhe
Penis in my butt.......

Which statement explains why some elements decay and others do not?

Answers

Where are the statements?

Answer:

C) Elements that decay have a proton to neutron ratio that is too high or too low.

Explanation:

e2021

what is the estimated digit in the number 0.0643

Answers

Answer:

3

Explanation:

Answer:

There are 3 estimated digits.

Explanation:

If an atom has 3 protons, what is its atomic number?

Answers

Answer:

Atomic Number = 3.

Explanation:

The number of protons determines the atomic number. Basically the number of protons is the exact same as the atomic number.

Protons 3 = Atomic number 3

name the following alkynes

Answers

Explanation:

1) 3,4-dimethyl hex-1,5-diyne

2) 3,3-diethyl pent-4-yn-1-ene

3) 5-(1'-ethyl-2',3'-dimethyl propane) dec-1,3-diyne

2. Explain how energy originates and is emitted from a star.

Answers

Answer:

Stars generate energy through nuclear fusion. Here's an easy explanation about how the process works. ... Stars spend most of their lives repetitively compressing two hydrogen atoms into a single helium atom – plus a lot of energy, which is released as light and heat.

a person who has non-functional cone type won't be able to identify the_____________of
fill in the blank.
A.color
B. shape
C. size​

Answers

Answer:

A

Explanation:

more domunit

please help timed !! due rn !! What happens to particle motion as two substances come to thermal equilibrium?

Answers

Answer:

When two substances that are of different temperatures are brought together and there is heat transfer such that the substances come to thermal equilibrium, the effect on the particle motion are as follows

1) The particle motion of the hotter body reduces, because its temperature reduces

2) The particle motion of the colder body increases, because its temperature increases

3) For gases, the volume and or pressure reduces for the hotter body, and if the temperature of the gas falls below the boiling point temperature, the gas will change into liquid

For the colder gas, only the volume and or pressure increases and the temperature rises

4) For liquids, if the temperature of the hotter liquid falls below the melting point, the hotter liquid will become a frozen solid

For the the colder liquid, if the temperature is raised above the boiling point, the liquid changes into gas and the temperature does not rise above the boiling point temperature, until all the cold liquid has evaporated

5) For solids, the vibration of the particles of the hotter substance reduces and the solid becomes more brittle

For the colder body, the rise in temperature causes an increase in vibration of the particles, and if the temperature rises above the melting point, the colder solid will begin to melt

Explanation:

What are some real world examples of physical change and chemical change ?

Answers

Answer:

Examples of chemical changes are burning, cooking, rusting, and rotting. Examples of physical changes are boiling, melting, freezing, and shredding. Often, physical changes can be undone, if energy is input.

Explanation:

what element has 3 valence electrons in the 3rd energy level

Answers

Answer:

Aluminum (Al)

Explanation:

It has 3 electron orbitals and has 3 valence electrons

Express the measurement using the appropriate SI prefix. For example, 10.72 x 103m is the same as 10.72 km because the “k” stands for 103
8.09 x 10-6g

(I got super stuck on this)

Answers

Answer:

[tex]10.72 \times 10 {}^{3} m = 10.72km \\ 8.09 \times 10 {}^{ - 6} g = 8.09 \times 10 {}^{ - 9} kg \\ \\ note : \\ to \: convert \: to \: \: k(units) \: you \: divide \: the \: value \: by \: {10}^{3} . \\ 5m \: to \: km \: will \: be : \\ \frac{5}{1000} km = {5 \times 10}^{ - 3} km[/tex]

You are out on a hike, and you notice that the line of telephone wires you have been following along a slope is crooked. Two of the posts are much farther down slope then the others. What has likely occurred on this hillside?

Answers

Answer:

The awnser is creep

Explanation:

There don't appear to be any dial tone problems on the telephone caused by broken wires, connectors, wall jacks, or other network-interfering hardware.

What is hardware ?

Hardware describes the physical parts of the computer or its delivery mechanisms for the software's written instructions to be stored and executed. The device's intangible component that enables user interaction with the hardware is called the software.

Software is referred to as "soft" because it is flexible, but hardware is referred to as "hard" because it is rigid in terms of modifications. Software often instructs hardware to carry out any command.

Since a smartphone is fundamentally a small computer, it has several parts in common with computers, such as processors and memory. It's critical to balance your demands on this hardware because these components are continuously improved in new phone generations.

Thus, It doesn't seem that any broken wires, connectors, wall jacks, or other network-interfering gear are the root of any dial tone issues on the hardware.

To learn more about hardware, follow the link;

https://brainly.com/question/15232088

#SPJ5

Volume measurement is the best way to measure dry ingredients that may be too small to weigh accurately.


Answers

Answer:

uhhh hi

Explanation:

Plz help!

Which elements form covalent bonds? Which other element is included in the group?

Answers

covalent bonds usually occur between nonmetals. For example, in water (H2O) each hydrogen (H) and oxygen (O) share a pair of electrons to make a molecule of two hydrogen atoms single bonded to a single oxygen atom. In general, ionic bonds occur between elements that are far apart on the periodic table.

What is a scale and why do you use it?

Answers

To calculate the weight of something. It is used to find the weight of an object

Answer:

Scale is defined as a system or series of marks used for measuring or registering. An example of scale is what someone would use to figure out the length of something. An example of scale is what someone would use to find out how much they weigh.

Explanation:

Complete a write up about the elements in Ammonia and explain how the elements bounded to create the new substance.

Answers

Answer:

Explanation:

Ammonia consist of nitrogen and hydrogen.

Chemical equation:

N₂ + H₂    →   NH₃

Balance chemical  equation:

N₂ + 3H₂    →   2NH₃

We can see that nitrogen and hydrogen react with each other and from ammonia.

Nitrogen is present in group 5A.  The atomic number of nitrogen is 7.  Its atomic mass is 14 amu.  It has 5 valence electron.

Electronic configuration:

N₇ = 1s² 2s² 2p³

we can see there are five electron in outer most shell. Thus, nitrogen needs three more electrons to complete the octet.  When it combine with other atoms it gain three electron from them

While hydrogen is present in group 1A. It has one valence electron. In ammonia (NH₃) when nitrogen react with hydrogen it gain three electrons thus three atoms of hydrogen combine with one atom of ammonia because one hydrogen atom can share only one electron. Covalent bond is formed between nitrogen and hydrogen and new substance formed is called ammonia.

What is true about warm, saturated air?
It contains less water vapor than cold air.

It contains the same amount of water vapor as cold air.

It does not contain any water vapor.

It contains more water vapor than cold air.

Answers

Answer:

It contains more water vapor than cold air

According to the process of conduction which take place from hot to cold end warm saturated air has more water vapor than cold air.

Conduction is defined as a process as a means of which heat is transferred from the hotter end of the body to it's cooler end.Heat flows spontaneously from a body which is hot to a body which is cold.

In the process of conduction,heat flow is within the body and through itself.In solids the conduction of heat is due to the vibrations and collisions of molecules while in liquids and gases it is due to the random motion of the molecules .

As per the concept of conduction, warm hair has more water vapor than cold air, thus the correct option is that warm, saturated air has  more water vapor than cold air.

Learn more about conduction,here:

https://brainly.com/question/31201773

#SPJ6

pleaseee help ASAP
will mark brainliest!!! <3

Answers

answer: i would say c
explanation:

Answer:

it is C

Explanation:

I saw from Google. Hope it helps.

I cant get the full picture

sorry

What volume of silver metal will weigh exactly 2500g. The density of silver is 10,5 g/cubic centimeters.

Answers

Answer:

26250 cubic centimeters

Explanation:

What affects the pressure of an object? *

Answers

The pressure exerted on a surface by an object increases as the weight of the object increases or the surface area of contact decreases . Pressure depends on the amount of gas , the temperature, and the volume of the container .

Can anybody help me with this please

Answers

Answer:

30

Explanation:

its pushed into a 30 resistor

In this simulation, you will be exploring the relationship between temperature and pressure while keeping volume
constant. Click here to begin. Select the Explore box. Answer the questions as you perform the steps.
1. Raise and push down the pressure pump handle to add gas molecules to the container. The initial temperature is
300 K (27º) and the pressure has a range of 5.4-6.2 atm. Notice the pressure values change as the particles
collide with the wall.
2. Click on the bucket to raise the temperature of the container to approximately 400 K (127°C). What happened to
the pressure?
Approximately what pressure range did you observe?
3. Click on the bucket to reduce the temperature to approximately 200 K (-73°C). What happened to the pressure?
Approximately what pressure did you observe?
4. What gas law mathematically shows the relationships between temperature and pressure?

Answers

Answer:

increased, 7.5-8.3 atm; decreased, 3.5-4.3 atm; Gay-Lussac's Law

Explanation:

1. The collision of gas molecules, results in the pressure increases.

2. The pressure of the system with an increase in the temperature has been 7.2-8.2 atm.

3. The pressure of the system with a decrease in the temperature has been 3.6-4.1 atm.

4. The relationship between the molecules has been given by Gay-Lussac's Law.

The relationship between the temperature and pressure has been given in the gaseous molecules with the ideal gas equation.

1. The temperature has been directly proportional to the temperature. Thus, with an increase in pressure, there has been an increase in temperature and vice versa.

With the collision of the gas molecules with the wall, there has been the liberation of the energy that increases the temperature. The increase in temperature mediates the increase in pressure.

Thus, with the collision of gas molecules, the pressure increases.

2. The relationship between the pressure and temperature has been given as:

[tex]\dfrac{P1}{T1}=\dfrac{P2}{T2}[/tex]

The initial temperature [tex]T1=300\;\text K[/tex]

Final temperature [tex]T2=400\;\text K[/tex]

Initial pressure, [tex]P1=5.4-6.2\;\text {atm}[/tex]

Final pressure, [tex]P2[/tex]

Substituting the values for calculating P2 as:

[tex]\rm \dfrac{5.4-6.2\;atm}{300\;K}=\dfrac{P2}{400\;K}\\\\\textit P2 = \dfrac{5.4-6.2\;atm}{300\;K}\;\times\;400\;K\\\\\textit{P}2=7.2-8.2\;atm[/tex]

The pressure of the system with an increase in the temperature has been 7.2-8.2 atm.

3. The pressure with the reduction of temperature has been given by :

[tex]\dfrac{P1}{T1}=\dfrac{P2}{T2}[/tex]

The initial temperature [tex]T1=400\;\text K[/tex]

Final temperature [tex]T2=200\;\text K[/tex]

Initial pressure, [tex]P1=7.2-8.2\;\text {atm}[/tex]

Final pressure, [tex]P2[/tex]

Substituting the values for calculating P2 as:

[tex]\rm \dfrac{7.2-8.2\;atm}{400\;K}=\dfrac{P2}{200\;K}\\\\\textit P2 = \dfrac{7.2-8.2\;atm}{400\;K}\;\times\;200\;K\\\\\textit{P}2=3.6-4.1\;atm[/tex]

The pressure of the system with a decrease in the temperature has been 3.6-4.1 atm.

4. The relationship between the molecules has been given by Gay-Lussac's Law. The law states that pressure has been directly proportional to the absolute temperature of the system.

For more information about pressure of gas molecules, refer to the link:

https://brainly.com/question/15863086

How is Mass converted to the energy released in the fire

Answers

Answer:

The heat and light released by fire comes from the breaking of chemical bonds. ... The mass of each molecule, before burning, exceeds the total mass of its atoms by a tiny amount that is equivalent (through E=mc²) to the total energy of all its atomic bonds.

Explanation:

I hope this helps (:

The periodic table is a(n) _________________________________ system for the elements.

Answers

Answer:

Sabihin mo

Explanation:

salamat shoppe

An unknown metal has a density of 10.51 g/ml and a mass of 287.8 g. What is the
unknown metal's volume?

Answers

Answer:

27.3834443387 so B

Explanation:

M/D=V

287.8/10.51=V

V=27.3834443387

Answer:

27.38

Explanation:

287.8 Divided by 10.51 = 27.38

Please mark brainliest if helped

PLEASE HELP FAST !!!
How should measurement of car 2 be taken to accurately measure the distance it travels? Be sure to include where the meter stick should be placed.

the experimental setup, with car 1 is at the top of a ramp and car 2 at the bottom of the ramp

car 1
/ ←top of ramp
/ ←bottom of ramp
car 2

Answers

answer

The meter stick should be placed at the starting position of car 2 at the base of the ramp so that it measures the part of car 2 that will end up the furthest away from the base of the ramp.

explanation

i dont know if this is right or not but my teacher gave me a 90 so there is a 50/50 chance its right or wrong

please help its due at 2

Answers

Answer:

3. One example of condensation is dew forming on grass or leaves early in the morning when the air is cooled/cooling.

4. This is called freezing. For example, when water turns into ice (a solid) because it freezes.

5. This is called melting. The butter reached its melting point and turned into a liquid.

6. Adding or removing energy causes changes in states of matter. Temperature for example can cause melting and freezing.

7. Water which collects as droplets on a cold surface when humid air is in contact with it.

8. Evaporation/vaporization

9. before- particles are compact

during- particles vibrate

after- the particles move freely

10. condensation because it is going from gas into a liquid

11. Evaporation, I know because when liquid gets heated after a period of time  and it reaches its boiling point, it will begin evaporating.

12. When a solid is heated the particles gain energy and start to vibrate faster and faster. ... Although the particles are still loosely connected they are able to move around. At this point the solid is melting to form a liquid. The particles in the liquid are the same as in the solid but they have more energy.

13. Sublimation is the process of transformation directly from the solid phase to the gaseous phase, without passing through an intermediate liquid phase.

14. freezing because particles are becoming compact and getting slower because of decrease in temperature

15. Examples are mothballs, dry ice, snow in the winter months, freeze-drying (ice crystals in a frozen food bag), air fresheners, and printers that print out high-resolution images.

16. Try and think of it in terms of the molecules. The temperature is such that the molecules are all bound together into a solid. Occasionally a surface molecule picks up enough energy to break it bond,.. a statistical probability ,and drifts away. The overall temperature of the solid is reduced by that event,as temperature is just an average of the energy. A little more heat flows into the material ,from the ambient environment, and another molecule escapes, and so the process continues….. if the concentration of the molecules in the vapour space above the solid, is low the reverse process of molecules condensing onto the surface,and releasing energy back into the solid is low.

Explanation:

sorry it took a little bit, it wouldnt let me copy and paste what i had typed /:

Other Questions
I need help a-sap! Please and thank you!! What are dot plots used for?A. Dot plots are best used to show a distribution of data.B. Dot plots are best used to show answers to a non-statistical question.C. Dot plots are best used to help you ask questions.D. Dot plots are best used to help you tally data. Water enters a cell when there is more salt IN the cell than the extracellular environment. This is an exampleofa. equilibriumb. hypotonicc. isotonicd. hypertonic Per ounceor 20 shells $9.27 for 48 oz.$4.0.15aushell True or false: the moon has an effect on the ocean tides. Identify the translations of the parent function f(x) =|x| that give g(x) = 2 +|x+ 3|. Group of answer choices up 2 units, left 3 units up 2 units, right 3 units down 3 units, left 2 units down 3 units, right 2 units Micah is shopping for work shirts. The short-sleeve shirts cost $18 each and the long-sleeve shirts cost $24 each. He wants to buy 2 more short-sleeve shirts than long-sleeve shirts, and he is willing to spend no more than $120 total. How many long-sleeve shirts can he buy? What does Mesoamerica mean?A. American civilizationsB. Middle AmericaC. Native AmericaD. Mexican cultures You start at (4, 6). You move up 4 units and down 8 units. Where do you end? A store purchases an item wholesale for $60 and marks it up by 70 percent. If there is a 7 percent tax on the item, how much will the item cost? Which of the following is the distinguishing feature of prokaryotic cells?Prokaryotic cells have a nucleus.Prokaryotic cells do not have a cell wall.Prokaryotic cells do not have a nucleus.Prokaryotic cells have mitochondria. I WILL GIVE U BRAINLIEST Jenni works at a salon and earns a 15% commission on her total sales. How muchmust she sell in total in order to earn $90 in one day? what is the y- intercept from the table Write the expression to represent the words. Read the sentence.The offices boisterous celebration, full of cheering, shouting, and laughter, caused other businesses on the same floor to shut their doors.The word boisterous most likely means Letter: 8.5 inches by 11 inches Legal: 8.5 inches by 14 inches Junior legal: 5 inches by 8 inches Tabloid: 11 inches by 17 inches a. Are any of the paper sizes similar? b. The dimensions of government-letter paper are each 0.5 inch less than the dimensions of letter paper. Are these paper sizes similar? Question 2 c. By increasing the shorter side of legal paper by inch, it is similar to the size of junior legal paper. Sorry my kid needs help with this if i get this wrong im gonna fail plsfkdsjsdkl hello I need help on it please