sider the standing wave on a guitar string and the sound wave generated by the guitar as a result of this vibration. what do these two waves have in commo

Answers

Answer 1

The standing wave and sound wave have the same frequency

When a guitar string is plucked or strummed, it vibrates and creates a standing wave pattern. The frequency of this standing wave determines the pitch of the note that is produced by the guitar. The sound wave that is produced by the vibrating string will also have the same frequency as the standing wave. This is because the sound wave is created by the vibrations of the string, which are determined by the standing wave pattern.

The air molecules vibrate when the guitar vibrates, causing these waves to have the same frequency. Since a wave's period is inversely proportional to its frequency in this instance, the period will also be identical. Since wavelength and frequency are the products of speed, waves will travel at varying speeds because of this. As a result, both the period and frequency are identical.

Read more about frequency on:

https://brainly.com/question/254161

#SPJ4


Related Questions

22. Vernier calipers read to one tenth of a millimetre.
Which reading shows this precision?
A
3.3 cm
B 3.31 cm
C 3.310cm
D 3.312 cm
[5054

Answers

The reading which shows the precision of a Vernier calipers reading to one tenth of a millimeter is 3.31cm. Thus, the correct option is B.

What is Vernier calipers?

A vernier calipers is a measuring device which is used for the measurement of linear dimensions such as length. However, it is also used for the measurement of diameters of round objects through the help of the measuring jaws which are present in it.

Vernier calipers reading is the smallest measurable distance that can be captured by a Vernier caliper. It is termed as the resolution of the Vernier caliper. The resolution of metric Vernier calipers varies from 0.02mm to 0.05mm that is it reads to one tenth of a millimeter unit. Thus, 3.31cm is a precise reading.

Therefore, the correct option is B.

Learn more about Vernier calipers here:

https://brainly.com/question/13488735


#SPJ1

3. The Sl unit for work, the joule, is equal to _____

A)1 newton x 1 meter
B)1 newton/1 meter
C)1 meter/1 newton

Answers

Answer:

I believe A, if I'm wrong please inform me!!!

Explanation:

when a light ray moves from air into glass, which has a higher index of refraction, its path is

Answers

The light bends towards the normal line  

If light enters any substance with a advanced refractive  indicator  similar as from air into glass it slows down.

 When a  ray of light passes from a  lower  thick material such as air into a  thick material  such as glass or water it's bent down from the  face between the two accoutrements . This means that in this situation the angle of refraction will always  be lower than the angle of incidence.

The angle of refraction is  lower than the angle of incidence.  This occurs anytime you have 2 materials with different  indicators of refraction. As light passes from air it'll  decelerate down, which bends the light toward the normal.

To learn more about Angle of refraction:

https://brainly.com/question/14620594

#SPJ4

what direct evidence do we have that the weak and electromagnetic forces were once unified as a single electroweak force?

Answers

Answer:

There is direct evidence that the weak and electromagnetic forces were once unified as a single electroweak force from the study of subatomic particles.

Explanation:

The discovery of the W and Z bosons, which are particles that mediate the weak nuclear force, provided strong evidence that the weak force was once part of a larger electroweak force. The fact that the W and Z bosons have electric charge, and that their masses are related to the masses of the photon (the particle that mediates the electromagnetic force), supports the idea that the weak and electromagnetic forces were once part of a single electroweak force. Additionally, the mathematical symmetry of the electroweak theory, which unifies the weak and electromagnetic forces, provides further evidence for this theory.

In the figure below the left-hand cable has a
tension T1 and makes an angle of 55 ◦ with
the horizontal. The right-hand cable has a
tension T3 and makes an angle of 44 ◦ with
the horizontal. A W1 weight is on the left
and a W2 weight is on the right. The cable
connecting the two weights has a tension 39 N
and is horizontal.
The acceleration of gravity is 9.8 m/s^2

Determine the mass M2 in units of Kg

Answers

Answer:

18.5 kg

Explanation:

The mass M2 is approximately 18.5 kg.

To determine the mass M2, we need to use the given information to solve for the tensions T1 and T3, and then use these tensions and the horizontal tension of 39 N to calculate the mass of the weight on the right.

We can use the angles and the horizontal tension to calculate the vertical components of T1 and T3. The vertical component of T1 is given by T1 * sin 55°, and the vertical component of T3 is given by T3 * sin 44°.

We can use the principle of equilibrium to set the sum of the forces in the vertical direction equal to zero. In this case, the forces are the weight of the left weight W1, the vertical component of T1, the vertical component of T3, and the weight of the right weight M2 * g, where g is the acceleration of gravity (9.8 m/s^2).

We can write this as an equation: W1 + T1 * sin 55° + T3 * sin 44° - M2 * g = 0.

We know that the weight of the left weight is W1 = M1 * g, where M1 is the mass of the left weight. We also know that the horizontal tension is 39 N, and we can calculate the vertical components of T1 and T3 using the given angles and the horizontal tension. When we substitute these values into the equation above and solve for M2, we get:

M2 = (W1 + T1 * sin 55° + T3 * sin 44°) / g

= (M1 * g + 39 N * sin 55° + 39 N * sin 44°) / g

≈ 18.5 kg

Therefore, the mass M2 is approximately 18.5 kg.

8.how does distance affect the force of attraction between two oppositely charged particles? what does say about the interaction of like and differently charged particles?

Answers

Increasing the distance between objects reduces the attraction or repulsion between them.

When the distance between two charges is doubled, the attractive or repulsive force becomes weaker and drops to a quarter of its original value. If the charge is 10 times closer, the magnitude of the force will be 100 times greater. The magnitude of the force is proportional to the value of each charge.

Therefore, the strength of bonding between ions of opposite charge in an ionic compound depends on the charge of the ions and the distance between the centers of the ions as they are packed into the crystal. If the two charges held are unequal, the electrostatic force increases with distance.

Learn more about The force here:-   https://brainly.com/question/388851

#SPJ4

g after the first 15 seconds of intense exercise, such as sprinting or power lifting, most of the energy is provided by

Answers

During the first 15 seconds of intense exercise, such as sprinting or powerlifting, most of the energy is provided from phosphocreatine. Followed by energy via anaerobic glycolysis and finally aerobic metabolism

Most of the energy is provided by phosphocreatine.

Phosphocreatine is the phosphorylated form of creatine. It is primarily found endogenously in the skeletal muscles of vertebrates where it serves a critical role as a rapidly acting energy buffer for muscle cell actions like contractions via its ability to regenerate adenosine triphosphate (ATP) from adenosine diphosphate (ADP).

Anaerobic glycolysis is the transformation of glucose to lactate when limited amounts of oxygen are available. Anaerobic glycolysis is only an effective means of energy production during short, intense exercise.

Aerobic metabolism refers to an energy-generating system under the presence of oxygen as opposed to anaerobic, i.e., oxygen independent metabolism. Aerobic metabolism uses oxygen as the final electron acceptor in the electron transport chain and combines with hydrogen to form water.

learn more about phosphocreatine:

https://brainly.com/question/14562955

#SPJ4

atp is considered a high-energy molecule. when atp undergoes hydrolysis to adp, how much energy is produced?
a. 7.3 kcal/mole is required
b. 14.6 kcal/mole is released
c. 7.3 kcal/mole is released
d. 21.9 kcal/mol is released

Answers

The molecule ATP is regarded as having great energy. Energy is generated at a rate of 7.3 kcal/mol during the hydrolysis of ATP to ADP.

To keep the cell running continually, ATP must be replenished. Normally, ATP is present in cells in concentrations of 1 to 10 uM.

Describe hydrolysis.

When chemicals and water interact chemically, the result is hydrolysis, which decomposes both the material and the water.

Reactions involving salts, carbohydrates, proteins, lipids, etc. can undergo hydrolysis.

In catabolic processes, organic materials are typically hydrolyzed with the aid of enzymes.

Polysaccharides are broken down into monosaccharides, glycerol and fatty acids into lipids, and amino acids into proteins.

Hydrolysis is regarded as a crucial phase in the breakdown of silicate and aluminosilicate glasses, ceramics, and minerals because it destroys the bond network in silicates.

Learn more about hydrolysis here:

https://brainly.com/question/29834587

#SPJ4

How would the photo's setup change the mechanical advantage
of lifting the block as compared with lifting the block without a lever?

answer choices

The mechanical advantage would decrease, making the block more difficult to lift

The mechanical advantage would remain the same.

The mechanical advantage would increase, making

Answers

it would change it for it's format and identify it

Are bubbles in electrocuted water a new substance?

Answers

Yes, The bubbles in electrocuted water is considered as a new substance.

Why does water that has been electrified produce bubbles?

The water molecules' hydrogen and oxygen atoms are separating because of the electric current's flow, which is doing so. Bubbles of oxygen and hydrogen are consequently produced as a result.

What does electrocuted water entail?

When faulty wiring in a pool light, boat dock, or boat launch releases an electrical current into the water, electrifying the water, and a person, such as a swimmer, comes into contact with the electrified water, it causes electrocution in water, also known as an electric shock drowning.

To know more about electrified water, visit:

brainly.com/question/2493370

#SPJ1

a generator consists of a square coil of 60 turns rotating in a 0.55-t magnetic field. the frequency of this generator is 60.0 hz, and the root mean square (rms) voltage it generates is 120 v. what total length of copper wire do you need to make the coil? (hint: convert from rms voltage to peak voltage first.)

Answers

The total length of the copper wire is 28.008 m.

Calculate the angular frequency:

ω = 2 π f

ω = 2 × 3.14 × (60.0 Hz)

ω = 376.991 rad/s

Calculate the peak voltage:

V₀ = √2 × Vrms

V₀ = √2 × 120 V

V₀ = 169.706 V

The expression for the peak voltage and substitute the corresponding values to calculate the area of the square coil.

V₀ = NBAω

169.706 V = ( 60 ) × ( 0.55 T ) × ( A ) × ( 376.991 rad/s )

A = 0.01364 m²

The expression for the area of the square coil and substitute the corresponding values to calculate the side of the square:

A = L²

∴ L² = 0.01364 m²

∴ L = 0.1167 m

The total length of the wire to make the coil:

L(total) = (4N)L

L(total) = 4 × 60 × 0.1167

L(total) = 28.008 m

To learn more about RMS voltage, Here :

https://brainly.com/question/17071789?referrer=searchResults

#SPJ4

a linebacker strikes a side referee with a force of 100 n (on accident of course). the linebacker is in contact with the referee for 0.10 s. what is the magnitude of the change in momentum of the referee?

Answers

The magnitude of the change in momentum of the referee will be 10 Ns.

What does a momentum unit change mean?

Mass times velocity equals mass (M) times momentum (P) (v). However, there are alternative perspectives on momentum. The change in momentum (P) over the time period (t) equals force (F). And the impulse is equal to the shift in momentum (P) (J). The units for momentum and impulse are kg*m/s and N*s, respectively.

How to calculate change in momentum or Impulse?

Given, Force = 100N

time = 0.1. s

Impulse, J = F.t

J = 100×0.1

J or Δp = 10 Ns

The magnitude of the change in momentum of the referee will be 10 Ns.

To know more about Impulse visit

brainly.com/question/16980676

#SPJ4

the first students launches the ball with a velocity of 11.2 m/s in the x direction and 6.9 m/s in the y direction. what is the time the football takes to complete its flight path?

Answers

The time the football takes to complete its flight path is 1.04 sec.

Velocity is the directional pace of an item in motion as an indication of its rate of exchange in the role as determined from a selected frame of reference and as measured by way of a selected standard of time.

Average velocity is calculated by means of dividing your displacement (a vector pointing out of your initial role in your final position) through the entire time; the average pace is calculated by way of dividing the overall distance you traveled by means of the total time.

Calculation:-

Time of flight depends on the y direction

V in y direction is = 6.9 m/s

V² = U² - 2gh

h = u²/2g

   = 47.61 /2 * 9.8

   = 2.43 m

Time of flight = 2U/g

                       = 2 * 6.9 / 9.8

                       = 1.4 second.

Learn more about velocity here:-brainly.com/question/1844960

#SPJ4

an object with a mass of 10 kg is initally at rest at the top of a fricitonless incliiined plane that rises at 30 degress above the hhroizontal. the coefficient of kinetic friction between the hroizontal surface and the object is 0.2, and air resistance is negligible. find d

Answers

The acceleration is 3.2m/s².

According to the question,

An object with a mass of 10kg is sliding on a surface inclined at an angle θ=30° with the horizontal.

mass, m = 10kg

angle = 30°

the coefficient of kinetic friction between the horizontal surface and the object is (μ)= 0.2

let, acceleration = a m/[tex]s^{2}[/tex]

N=mgcos30°=mg[tex]\frac{\sqrt{3} }{2}[/tex]  ( cos30° = [tex]\frac{\sqrt{3} }{2}[/tex] )

The static friction force, fs=μN=μmg [tex]\frac{\sqrt{3} }2}[/tex]

We know that,

mgsinθ−fs=ma

⇒mgsin30°−μmg [tex]\frac{\sqrt{3} }{2}[/tex] =ma ( substitute the value)

⇒[tex]\frac{g}{2}[/tex]−μg[tex]\frac{\sqrt{3} }{2}[/tex] = a

⇒ [tex]5 - (5\sqrt{3} )(0.2) = a[/tex] ( substitute the value)

⇒a = 3.2 m/ [tex]s^{2}[/tex]

So, the acceleration is 3.2m/s².

Read more about acceleration :

https://brainly.com/question/14344386

#SPJ4

a current of 1.52 a is observed flowing through the cell for a period of 2.61 h . calculate the amount of charge flowing through the circuit during this time.

Answers

The quantity (the amount) of charge on the object will depend on the total number of electrons added to or subtracted from it.

"Q" stands for charge, while "C" stands for Coulomb. Mathematically speaking, the charge on a single electron is equal to a very little quantity of charge. Amperes are the units used to measure electric current; the ampere is represented by the letter A. A coulomb traveling through a spot in a wire in one second is equal to one ampere. I = Q t, where Q is the amount of charge passing a location in a certain amount of time, t I = 0.4 A t=1 hr=3600 s, allows us to determine current.

Charged Q=it=0.43600=1440 C.

Learn more about charge here-

https://brainly.com/question/11944606

#SPJ4

what is the correct pathway for the movement of sound waves through the human ear? 1. vibrations of the eardrum cause the ossicles to vibrate. 2. pressure waves move from the oval window to the vestibular canal, then to the tympanic canal. 3. ossicles vibrate against the oval window. 4. sound waves move through the outer ear canal. 5. waves strike the round window. question 6 options: 2, 1, 4, 3, 5 3, 1, 5, 4, 2 4, 1, 3, 2, 5 5, 2, 3, 1, 4 4, 3, 2, 1, 5

Answers

The eardrum vibrates in response to incoming sound waves, and three small bones in the middle ear receive these vibrations. The names of these bones are malleus, incus, and stapes.

How do waves behave physically?

A wave is an energetic disturbance that travels from one location to another. When ever a wave propagates, simply energy, no matter, is changed. The medium is that material through which a wave travels. That medium repeatedly oscillates back and forth.

How might waves be defined?

A wave is a disturbance or variation that gradually transfers energy from one place to another in a medium. It might be in the form of an elastic deformation or a change in pressure, electric or magnetic strength, electric potential, or temperature.

To know more about Waves visit:

https://brainly.com/question/19477984

#SPJ4

two point masses m and m are separated by a distance d. if the distance between the masses is increased to 3d, how does the gravitational force between them change?

Answers

The gravitational force between them change is force will be one-ninth as great.

It is possible to think of the gravitational force as an attracting force that pulls all mass-containing physical objects together. It is the known natural force with the lowest strength. Gravitational force is the name for the force that the earth exerts on a body. As an illustration of motion caused by gravity, consider how leaves and fruits fall to the ground from trees, how water flows down rivers, or how a ball tossed into the air flies to a height before falling back to earth. The universal force of attraction operating on all matter is known as gravity, usually spelled gravitation, in mechanics. It plays no part in determining the interior properties of common stuff because it is by far the weakest force in nature that is known to exist.e.

Learn more about gravitational force here:

https://brainly.com/question/12528243

#SPJ4

a marble moves along the x-axis. the potential-energy function is shown in the figure (figure 1) .

Answers

At  b Fx =0 of the labeled x-coordinates is the force on the marble zero.

As per the details share in the given figure,

Are as bellow,

At b x-coordinates is zero as,

A spherical or elliptical coordinate system known as the geographic coordinate system is used to measure and transmit positions on Earth as latitude and longitude. Of the many spatial reference systems in use, it is the most basic, traditional, and often utilized. It also serves as the foundation for the majority of other systems.

F = -dU/dx ,

Depending on whether F is lowest or maximal, v.

B is the regional minimum in the presented graph.

The slope of the provided curve's tangent at b is thus zero.

A line's slope, often known as its gradient, is a numerical representation of the line's elevation change and course.

so dv/dx =0

Therefore at b Fx =0

For such more question on slope.

https://brainly.com/question/16949303

#SPJ4

Note:- The correct question would be as bellow,

A marble moves along the x-axis. The potential-energy function is shown in the figure below.

(a) At which of the labeled x-coordinates is the force on the marble zero?

abcd

an a/c unit consumes 12,000 btu of electricity to remove 24,000 btu of heat from a house. what is the coefficient of performance (cop)? how much heat is rejected to the outdoors?

Answers

When AC consumes 12000 Btu of electricity and removes 24000 Btu of heat then it's coefficient of performance is 2 and heat rejected to outdoors is 24000 Btu.

The COP of a refrigerator or air conditioning system is a ratio of useful heating or cooling provided to work (energy) required. Higher COPs indicate higher efficiency, lower energy (power) consumption, and thus lower operating costs.

Given,

[tex]W_{supply}[/tex] = 12000 Btu

[tex]Q_{removed}[/tex] = 24000 Btu

Here, W- Electrical energy or work done on the Ac

[tex]Q_{removed}[/tex] = Total quantity of heat removed from house

The formula for the coefficient of performance of the Ac can be written as,

[tex]COP=\frac{Q_{removed}}{W}\\\\=\frac{24000}{12000}\\\\=2[/tex]

Hence, the coefficient of performance is 2.

The total heat rejected to the outdoor from the hose is,

[tex]Q_{rejected}=Q_{removed}[/tex] = 12000 Btu

Hence, the heat rejected to the outdoors is 24000 Btu.

To learn more about C.O.P refer here

https://brainly.com/question/13507423

#SPJ4

what is the wavelength of the light we would observe today, when the universe is 13.7 billion years old?

Answers

Since light travels at a finite speed, if we witness an object 13 billion light years distant, the light has been moving in our direction for 13 billion years. In essence, what we are witnessing is how that item looked 13 billion years ago.

The cosmos is 13.7 billion years old, but how can we know this?

Although scientists are unsure of the universe's actual age, we estimate that it is roughly 13 billion years old, give or take a few billion. Two methods are used by astronomers to determine the age of the universe: (a) searching for the earliest stars; and (b) measuring the universe's rate of expansion and extrapolating back to the Big Bang.

The age of the universe is 13.8 billion light-years?

When we look up at the sky, we can only make out light that originates from objects that are currently 46 billion light years away and is at most 13.8 billion years old. Anything farther is beyond the horizon, but every second we see fresh, older light emerging from a location that is just a little bit further away—exactly three light seconds farther.

To know more about universe visit;

https://brainly.com/question/28715845

#SPJ4

an unkniown tuning fork is osudned along with a tiuning fork wjopse frequency is 256hz and beqat frquency of 3hz is hesr. what is the frequnct of th ekniown tuining fork

Answers

The unknown frequency  is 253Hz or 259Hz

The beat frequency fbeat = f1 ± f2

Taking f1 = 256Hzand   f beat  = 3Hz

we get the unknown frequency   f2 = 253Hz or 259Hz

The frequency of an event is its repetitions per unit of time. [1] For clarification, it is sometimes referred to as temporal frequency and is separate from angular frequency. One event occurs every second, or one hertz (Hz), when measuring frequency. The period is the inverse of frequency since it measures the time elapsed between events.  For instance, the period, T the time interval at which the is half a second if a heart beats at a frequency of 120 beats per minute (2 hertz).

Learn more about frequency here:

https://brainly.com/question/13104367

#SPJ4

The chemical equation for the combustion of pentaborane is as follows:

2 B5H9 + 12 O2 => 5 B2O3 + 9 H2O

The energies of the different chemicals are as follows:

2 B5H9 is equal to 146.4 kJ/mol

12 O2 is equal to 0 kJ/mol

5 B2O3 is equal to -6363.85 kJ/mol

9 H2O is equal to -2176.38 kJ/mol



Calculate the energy difference between the products and reactants and determine if the reaction is exothermic or endothermic

Answers

The energy difference of the given reaction is -8686.63 kJ/mol

The reaction is an exothermic reaction.

What is the energy difference of a reaction?

The energy difference of a reaction is the difference between the sum of the energy of the products and the sum of the energy of the reactants.

The energy difference of a reaction is also called the enthalpy change of a reaction.

The enthalpy of a reaction is the sum of the energy changes that occur in a reaction.

When the sum of the energy changes that occur in a reaction is positive, the reaction is endothermic. However, when the sum of the energy changes that occur in a reaction is negative, the reaction is exothermic.

The energy difference of the given reaction is determined as follows;

The energy of products = -6363.85 kJ/mol + (-2176.38 kJ/mol)

The energy of products =  -8540.23 kJ/mol

The energy of reactants = 146.4 kJ/mol + 0 kJ/mol

The energy of reactants = 146.4 kJ/mol

The energy difference = -8540.23 kJ/mol - 146.4 kJ/mol

The energy difference = -8686.63 kJ/mol

The reaction is, therefore, an exothermic reaction.

Learn more about exothermic reactions at: https://brainly.com/question/1831525

#SPJ1

most of the radiation released from the failed nuclear reactor was from fission products t or f

Answers

Cesium-134, cesium-137, and iodine-131. According to UNSCEAR, iodine-131 has a half-life of only eight days, yet it is quickly inhaled through the air and has a tendency to concentrate in the thyroid gland.

What reactor exploded as a result of failure?

A low-power test on the Chernobyl nuclear reactor power plant's Number Four RBMK reactor went awry on April 26, 1986, resulting in an explosion and fire that destroyed the reactor building and spilled a significant amount of radioactivity into the atmosphere.

What led to Chernobyl's failure?

After the SCRAM began, there was a significant power increase that caused the core to overheat. A few seconds later, this overheating led to the initial explosion. Several of the fuel rods cracked and became obstructed.

To know more about nuclear reactor visit:-

https://brainly.com/question/13869748

#SPJ4

a circular loop of wire is placed perpendicular to a uniform magnetic field of 0.500 t. external forces decrease the area of the loop at a uniform rate by 2.52 m2 in 2 seconds. find the emf induced in the loop.

Answers

The emf induced in the loop is -6.30 x [tex]10^{-4}[/tex] Wb/s.

The emf induced in the loop is given by the equation:

ε = -N × (ΔΦ / Δt)

where ε is the emf induced in the loop, N is the number of turns in the loop, ΔΦ is the change in the magnetic flux through the loop, and Δt is the time over which the change in magnetic flux occurs.

In this case, the change in magnetic flux through the loop is given by the equation:

ΔΦ = B × ΔA

where B is the strength of the magnetic field and ΔA is the change in the area of the loop.

Plugging the values for B and ΔA into the equation gives us the following:

ΔΦ = 0.50 T × (-1.26 x [tex]10^{-3}[/tex] m²/s) = -6.30 x [tex]10^{-4}[/tex] Wb/s

To determine the emf induced in the loop, we need to know the number of turns in the loop and the time over which the change in magnetic flux occurs. Without this information, it is not possible to calculate the emf induced in the loop.

Learn more about emf at

https://brainly.com/question/16764848?referrer=searchResults

#SPJ4

Design a promotions campaign for a new "veggie burger" at the only fast-food restaurant near a college campus. Be sure to consider the following questions regarding promotion: What are the most effective, and cost-effective, ways to reach your target market? What consistent messages do you want to communicate about your product? When is the best time to promote your product? How do competitors promote their products? How effective are they?

Answers

Campaigning for perplexing that one of the world's largest fast food chains is still trailing behind, with no vegetarian or vegan burgers.

What is campaign ?
A campaign is any series of actions or events designed to achieve a specific result, such as a television commercial and Internet ad campaign attempting to persuade children to buy bubble gum-flavored toothpaste.

The noun campaign refers to any group of actions carried out with a specific goal in mind. A political campaign's purpose is to elect a candidate to office. A military campaign's purpose may be to gain control of a city, as in General Sherman's Civil War campaign to conquer Atlanta. Campaign may also be used as a verb, such as when an environmental organisation asks people to sign petitions and contact their representatives in Congress to prevent a developer from establishing a shopping mall.

In recent years, the terrible impact of animal husbandry has taken centre stage, and we're becoming more aware of the impact our meat consumption has on the environment, our health, and animals. Which makes it even more perplexing that one of the world's largest fast food chains is still trailing behind, with no vegetarian or vegan burgers.

To learn more about campaign follow the given link: https://brainly.com/question/27791089

#SPJ1

a catapult launches a rock at a angle with respect to the horizontal. find the maximum height attained if the speed of the rock at its highest point is m/s.

Answers

The maximum height is 15.3m

The speed of the rock is -9.8m/s

Solution:

v(horizontal) = v0 cos 30 = 30

v0=30/cos30=34.6m/s

Therefore the initial vertical velocity is v0 sin30 =

34.6 sin30=17.3m/s

if the initial vertical speed is 17.3m/s, we can use

vfy^2=v0y^2+2ad

vfy = final y velocity=y vel at max height =0

v0y = initial y velocity = 17.3 m/s

a = accel = -9.8m/s/s

d = height

0 = 17.3^2-2(9.8)d

d = 17.3^2/19.6 = 15.3 m

Velocity is the distance traveled per unit of time, the speed of movement. The speed of a car traveling on a smooth, flat section of a highway without traffic congestion is constant and not zero. Acceleration is the rate of change of velocity. The reason is simple. Velocity is the percentage of time an object moves along a path and Velocity is the speed and direction of an object's movement.

Learn more about Velocity here:-https://brainly.com/question/25749514

#SPJ4

a projectile is fired from the surface of hte earth with a speed of 200 meters per second at a an angle of 30 degrees above the horizontal. if the ground is level what is the max height reached by the projectile

Answers

Answer:

506.68 meters

Explanation:

When you launch a projectile at an angle θ from the horizontal, the initial velocity of the projectile will have a vertical and a horizontal component.

In order to determine the maximum height reached by the projectile during its flight, we need to use the vertical component of its motion.

We can use the equation below to find the maximum height.

[tex]h_{max} =\frac{v_o^{2}sin^2(B) }{2g}[/tex]

We are given

[tex]v_o=200[/tex]

[tex]B=30[/tex]

[tex]g=9.81[/tex]

Lets evaluate [tex]h_{max}[/tex].

[tex]h_{max} =\frac{200^{2}sin^2(30) }{2*9.81}[/tex]

[tex]h_{max} =\frac{40000^{2}sin^2(30) }{2*9.81}[/tex]

[tex]h_{max} =\frac{40000(\frac{1}{2})^2 }{2*9.81}[/tex]

[tex]h_{max} =\frac{40000(\frac{1}{4}) }{2*9.81}[/tex]

[tex]h_{max} =\frac{10000}{2*9.81}[/tex]

[tex]h_{max} =\frac{10000}{19.62}[/tex]

[tex]h_{max} =509.68[/tex]

. how is it possible that a body moves at a constant speed and still in accelerating motion? 2. when a car is going around a circular track with constant speed, what provides the centripetal force necessary for circular motion? 3. what are directions of acceleration and net force if the speed of an object is changing while rotating in a circular motion?

Answers

As velocity is a vector quantity that depends on the direction of the automobile, a car traveling on a roundabout can have a constant speed but can also have fluctuating velocity because its direction will be changing frequently.

There might be a change in velocity's magnitude (speed), direction, or both. Even if the speed may be constant in uniform circular motion, there is always an accompanying acceleration since the direction of the velocity changes continuously.

Because acceleration is a change in velocity, an object that is temporarily at rest yet has some speed a split second later can still be altering velocity.

To know more about circular motion visit :

https://brainly.com/question/228523

#SPJ4

a pendulum has a period of 2.50 s on earth. part a what is its period on mars, where the acceleration of gravity is about 0.37 that on earth? express your answer using two significant figures. to mars

Answers

The time period of pendulum on mars is 4.16 s.

A pendulum is a machine in which a point mass is hung from fixed support by an inextensible string. The length of the simple pendulum is the vertical distance between the point of suspension and the suspended body's centre of mass.

We know that, the time period of pendulum is inversely proportional to the square root of acceleration due to gravity.

T₁/ T₂ = √(g₂ / g₁)

Given that, T₁ = 2.5 s

g₂ / g₁ = 0.37

Placing the values in the above equation,

2.5/ T₂ = √ 0.37

2.5² = T₂² * 0.37

T₂² = 2.5² / 0.37

T₂² = 16.89

T₂ = 4.16 s

Thus, the time period of pendulum on mars is 4.16 s.

To know more about time period:

https://brainly.com/question/28202248

#SPJ4

The motion of the piston in an automobile engine is oscillatory as the piston travels back and forth. If the piston makes 2,000 complete cycles every minute, what is the period of the motion of the piston
a. 0.5 ms
b. 30 ms
c. 2.0 s
d. 33.3 s

Answers

The time period of the piston is b. 30ms

What is Time period?The Time Period is the length of time required for a single complete oscillation to take place. T symbolizes for Time period.The SI unit of Time period is seconds(s)The frequency is the quantity of vibrations or repetitions of an event per unit of time. Hertz units are used to measure frequency.

To calculate Time period we have,

T=[tex]\frac{t}{N}[/tex]

Where,

T is time period,

t is time taken by piston,

N is number of cycles.

We are given that

t= 1 min = 60 sec

N= 2000

T=[tex]\frac{t}{N}[/tex]

T =[tex]\frac{60}{2000}[/tex]

T = 0.03  s

T = 30 × [tex]10^{-3}[/tex]

T = 30 ms.

Therefore the time period taken by the piston = 30 ms.

To know more about  Time period refer here

https://brainly.com/question/14476485#

#SPJ4

Other Questions
which of the following methods would be best to use for distinguishing between an infectious agent that is a virus and one that is a prion? 1- Declare a structure whose tag name is Point2D and that contains exactly two fields (or members), both of type double . The first field is x and the second field is y.2- Declare a structure whose tag name is ThreeDPoint and that contains exactly three fields (or members), each of type double . The first field is x, the second field is y and the third field is z.3- Declare a structure whose tag name is Book and that contains exactly three fields (or members), each of type int . The first field is nCopies, the second field is nPages and the third field is nAuthors.4- Declare a structure whose tag name is DrawnLine and that contains exactly two fields (or members). The first field is letter and is of type char , the second field is number and is of type int .5- Declare a structure whose tag name is Emp and that contains these fields (in the following order): a double field named d, a character pointer named str, and an array of eleven integers named arr. In addition, declare a array named emp of 30 of these structures. Assign the value 12 to the last element of the arr field of the last element of emp. Assign 3.5 to the d field of the first empelement . Assign the string Hello to the k'th element of emp (assume k has been declared as an integer variable and assigned a value in the range of the array elements ). distinguishing between normal and abnormal behavior is often difficult to do, yet a majority of clinicians agree on the fundamental criteria involved in classifying abnormality: deviance, maladaptive behavior, and personal distress. dr. arnold just met a new client, kristen, and took notes during their initial session. identify the criterion that dr. arnold's notes address. HI, i am in 7th grade i really need help this question is confusing At the start, the water level of the river was 12 centimeters below its normal water level.After a day of rain, the water level of the river increased by 18 centimeters.The next 8 days were dry, and the water level of the river dropped by 2.6 centimeters each day.Enter a numerical expression representing the water level after the 9 -day period.What is the value of the expression you entered in part A?What does the value in part B mean in the situation? A local store is keeping track of service times. The table below shows the number of customers served and the time it took. the overall reaction, 6 co2 18 atp 12 nadph water -> 2 glyceraldehyde 3-phosophate 6 phosphate 18 adp 12 nadp : a simple ideal rankine cycle with water as the working fluid operates between the pressure limits of 3 mpa in the boiler and 30 kpa in the condenser. if the quality at the exit of the turbine cannot be less than 80 percent, what is the maximum thermal efficiency this cycle can have? use steam tables. the maximum thermal efficiency is %. A boat travels 80 miles downstream in 4 hours. It makes the return trip, against the current, in twice the time. What is the speed of the current? (Remember: rate x time = distance)[Please show and explain how you solved this word problem.] Write the point-slope form of the equation of the line that passes through the points (-8, 2) and (1, -4). Include your work in your final answer. Type your answer in the box provided or use the upload option to submit your solution.Slope: -2/3Point-Slope Form: y - 2 = -2/3 ( x - (-8)) A circle has a diameter of 20 ft. What is the area?Show or explain your reasoning.Lots of love for the ones who helps!! In Exercises 1, 2, 3, 4, 5, and 6, show that v is an eigenvector of A and find the corresponding eigenvalue. A= [ -1 16 0 ] V = [1 -2] in the decision support system (dss) environment, the focuses on how a dss is implemented and usually addresses questions about data storage, user access, response time, and security measures. Hey there! Can someone please help me here?Prepare a short written presentation in Spanish for a Food and Nutrition class.When completing your work, consider what you have learned about holiday foods from various Spanish-speaking countries. Use your knowledge to help students in the class understand how learning a new language can help them in their future careers as chefs, workers in the restaurant industry, or health and nutrition fields. Make a connection to food and culture.The presentation must be completed in Spanish with a minimum of 5 detailed and complete sentences. the enormous gains in crop yields brought about by green revolution technologies may soon stop. hypothesize why. #50 The HIPAA privacy rule __________.A. Protects only medical information that is not already specifically protected by state lawB. Supersedes all state laws that conflict with itC. Is federal common lawD. Sets a minimum (floor) of privacy requirements you are responsible for implementing assets accounting, you are provided with the legacy data of various assets and their grouping information based on classifications, useful life, and depreciation terms what configuration step would you initiate to maintain these categories in sap s/4 hana ? psychological stress is the sense that challenges and demands surpass one's current capacities, resources, and energies. which of these statements about stress are accurate and which are not a company sells detergent in three different sized boxes: small (s), medium (m) and large (l). the medium size costs 50% more than the small size and contains 20% less detergent than the large size. the large size contains twice as much detergent as the small size and costs 30% more than the medium size. rank the three sizes from best to worst buy. Meryl stood X meters from the base of a lighthouse. The angle from where she stood to the top of lighthouse was 60 degrees. If the lighthouse was 66.5 meters tall, how far away was Meryl standing from the base of the lighthouse? Round your answer to the nearest whole meter. which of the following countries is a permanent member of the united nations security council?