The centripetal acceleration which always act toward the center of the circle. The vectors are perpendicular. The correct answer for this question, is option D
The speed of an object is always constant in a circular motion while the object keeps changing direction regularly. The velocity will keep changing because of the change in direction.
Whenever there is a change in velocity, there must be acceleration.
When the object is moving in a circular path with a constant speed, the directions of an object's velocity and acceleration vectors will be perpendicular to each other
The reason is because acceleration is centripetal acceleration which always act toward the center of the circle.
Therefore, the correct answer for this question, is option D
Learn more about circular motion here: https://brainly.com/question/10493657
Which image shows an example of the electromagnetic force in action?
Answer:
Where are the images?
Explanation:
I can't help if there is no image(s) to this question.
Learning Task 1: Define or describe the following words relat are not familiar with the word, you may ask assistance from y your answer in your notebook. 1. table 2. tennis C 3. ping-pong 4. net 5. ball 6. racket
Answer:
1.) TABLE = The table is 2.74 m (9.0 ft) long, 1.525 m (5.0 ft) wide, and 76 cm (2.5 ft) high with any continuous material so long as the table yields a uniform bounce of about 23 cm (9.1 in) when a standard ball is dropped onto it from a height of 30 cm (11.8 in), or about 77%.
2.) TENNIS = Tennis is a racket sport that can be played individually against a single opponent (singles) or between two teams of two players each (doubles). Each player uses a tennis racket that is strung with cord to strike a hollow rubber ball covered with felt over or around a net and into the opponent's court.
3.) PING-PONG = Table tennis, also known as ping-pong and whiff-whaff, is a sport in which two or four players hit a lightweight ball, also known as the ping-pong ball, back and forth across a table using small rackets. ... Spinning the ball alters its trajectory and limits an opponent's options, giving the hitter a great advantage.
4.) NET = This is stretched across the centter of the table by a cord attached to a post at either end. It measures 6ft long and the ball must pass over it for a rally to continue.
5.) BALL = The ball, which is spherical and hollow, was once made of white celluloid. Since 1969 a plastic similar to celluloid has been used. The ball, which may be coloured white, yellow, or orange, weighs about 0.09 ounce (2.7 grams) and has a diameter of about 1.6 inches (4 cm).
6.) RACKET = A table tennis racket is made up of two distinct parts - a wooden blade which incorporates the handle together with table tennis rubbers affixed to each side of the blade using water-based glue.
Explanation:
All my answers are
about the tools of the
game of tennis
Which is a possible food chain in the ocean from start to finish?
a.phytoplankton, zooplankton, small fish, large fish, large shark
b.phytoplankton, large shark, zooplankton, large fish, small fish
c.large shark, large fish, small fish, zooplankton, phytoplankton
d.zooplankton, phytoplankton, large fish, small fish, large shark
Answer:
a.phytoplankton, zooplankton, small fish, large fish, large shark
Explanation:
The bottom level of the ocean's food chain is made up of one-celled organisms called phytoplankton. These tiny organisms are microscopic. They are so small they cannot be seen without a microscope. Billions of phytoplankton live in the upper part of the ocean. They take in the sun's light.
Phytoplankton, or plant plankton, is the first link in the food chain in the ocean. They require sunlight for photosynthesis, which they must perform. They therefore reside higher up in the shallow sunlight. Furthermore, they transform themselves into an ocean animal that can eat the “food” from the sun. Thus, option A is correct.
What food chain in the ocean from start to finish?One-celled organisms known as phytoplankton make up the base of the ocean's food chain. These microscopic organisms are quite small. Without a microscope, they are invisible due to their small size. In the upper ocean, there are billions of phytoplanktons. They absorb the light from the sun.
Aquatic food webs are built on phytoplankton and algae. They are consumed by zooplankton, tiny fish, and crustaceans, which are the main consumers. Fish, tiny sharks, corals, and baleen whales all devour the primary consumers after them.
Therefore, phytoplankton, zooplankton, small fish, large fish, large shark is a possible food chain in the ocean from start to finish.
Learn more about ocean here:
https://brainly.com/question/29360503
#SPJ2
The Earth currently has an orbital period of 1 year and a semi-major
axis length of 1 AU. If the Earth's orbit changed and the semi-major
axis length increased to 1.1 AU, how would the Earth's orbital period change?
A: It would increase by 0.15 years
B: It would increase by 0.032 years
C: It would decrease by 0.15 years
D: It would decrease by 0.032 years
The Earth's orbital period change is A: It would increase by 0.15 years
Using Kepler's third law which states that the square of the orbital period of the planet is directly proportional to the cube of its distance from the sun.
So, T² ∝ R³
T'²/T² = R'³/R³ where
T = orbital period at R = 1 yearR = initial axis length = 1 AUT' = orbital period at R'R' = final axis length = 1.1 AU.So, making T' subject of the formula, we have
T' = [√(R'/R)³]T
T' = [√(1.1 AU/1 AU)³] × 1 year
T' = [√(1.1)³] × 1 year
T' = √1.331 × 1 year
T' = 1.15 × 1 year
T' = 1.15 years.
So, the change in the Earth's orbital period ΔT = T' - T
= 1.15 years - 1 year
= 0.15 years
Since this is positive, the orbital period increases by 0.15 years.
So, the Earth's orbital period change is A: It would increase by 0.15 years
Learn more about Kepler's third law here:
https://brainly.com/question/16546004
can you fit all the planets between earth and moon
Answer: No, planets of our solar system, with or without Pluto, cannot fit within the mean lunar distance. An additional 3,500 km is needed to squeeze in Neptune
Stewart (70 Kg) is attracted to Ms. Little (60 Kg) who sits 2 m away. What is the gravitational attraction between them? G=6.67×10^-11 (-11 is an exponent)
Happy Holidays!
We can use the following equation to solve for the gravitational force:
[tex]\large\boxed{F_g = G\frac{m_1m_2}{r^2}}[/tex]
Fg = force due to gravity (N)
G = Gravitational constant
m1,m2 = masses of the objects (kg)
r = distance between the objects (m)
Plug in the given values into the equation:
[tex]F_g = (6.67*10^{-11})\frac{(70)(60)}{(2)^2}} = \boxed{7.0 * 10^{-8}N}[/tex]
1. Which of the following types of energy is
potential energy? More than one answer is
possible,
A kinetic energy
B.thermal energy
C.sound energy
D.gravitational energy
Answer:
Potential energy is stored energy and the energy of position––gravitational energy. There are several forms of potential energy. Electrical Energy is the movement of electrical charges. Everything is made of tiny particles called atoms.
What chemical reactions support all life on earth?
Answer:
I’d say both anabolic and catabolic chemical reactions make life on Earth possible. Anabolic is the building up of molecules from atoms or small molecules and catabolic is the chemical reactions of breaking them down.
Explanation:
anything that has mass and occupies space is called
Answer:
Matter
Hope you could get an idea from here.
Doubt clarification - use comment section.
Please answer the following question!
What is the momentum of a 750-kg Volkswagen Beetle when at rest?
Please give the value and momentum!
Answer:
0
Explanation:
the momentum will always be 0 when it is at rest because the object isnt moving!
Hope this helped!
A wave has wavelength of 10 m and a speed of 340 m/s. What is the frequency of the wave?
I need the Formula,Known,Substitute & Solve Answer with Units
Answer:
This is the answer that I got.
Explanation:
Hope it is right.
which constellation is in contrast with ursa major
Answer: Ursa Major (/ˈɜːrsə ˈmeɪdʒər/; also known as the Great Bear) is a constellation in the northern sky, whose associated mythology likely dates back into prehistory. Its Latin name means "greater (or larger) she-bear," referring to and contrasting it with nearby Ursa Minor, the lesser bear.
Bordering constellations: Draco; Cameloparda...
Brightest star: ε UMa (Alioth) (1.76m)
Meteor showers: Alpha Ursa Majorids; Leonid...
Symbolism: the Great Bear
4 What type of circuit is described by each of the following statements?
Answer series or parallel
a All components are connected end-to-end.
b. The current in the circuit divides so that some flows through one component
and the rest through another component
Two lamps are connected side by side so that each lights brightly
d The current has the same valur everywhere in the circuit
C
The instant before a batter hits a 0.14-kilogram baseball, the velocity of the ball is 45 meters per second west. The instant after the batter hits the ball, the ball's velocity is 35 meters per second east. The bat and ball are in contact for 1.0 x 10-2 second.
1. find the magnitude and direction of the average acceleration of the baseball while it is in contact with the bat.
2. calculate the magnitude of the average force the Bat exerts on the ball while they are in contact.
(1) The magnitude and direction of the average acceleration of the baseball while it is in contact with the bat is 8,000 m/s² east.
(2) The magnitude of the average force the Bat exerts on the ball while they are in contact is 1,120 N.
The given parameters:
Mass of the baseball, m = 0.14 kgInitial velocity of the baseball, u = 45 m/s west (negative direction)Final velocity of the baseball, v = 35 m/s east (positive direction)Time of contact, t = 0.01 sThe magnitude and direction of the average acceleration of the baseball while it is in contact with the bat is calculated as follows:
[tex]a = \frac{v- u}{t} \\\\a = \frac{35 - (-45)}{0.01} \\\\a = \frac{80}{0.01} \\\\a = 8,000 \ m/s^2[/tex]
The magnitude of the average force the Bat exerts on the ball while they are in contact is calculated as follows;
[tex]F = ma\\\\F = 0.14 \times 8,000\\\\F = 1,120 \ N[/tex]
Learn more about average force here: https://brainly.com/question/16200276
A racing car has a mass of 750 kg. It undergoes an acceleration of 4.00 m/s2. What is the net force acting on the car?
Answer:
3000 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × acceleration
From the question we have
force = 750 × 4 = 3000
We have the final answer as
3000 NHope this helps you
What is number 10 for this?
Answer:
The wavelength of WFNX’s radio waves with the given speed and frequency is 2.95m.
Given data in the question;
Speed of wave;
Frequency of wave;
wavelength;
To determine the wavelength of the radio wave, we use the expression for the relations between wavelength, frequency and speed.
Where is wavelength, f is frequency and c is the speed.
We substitute our given values into the equation
Therefore, the wavelength of WFNX’s radio waves with the given speed and frequency is 2.95m.
Explanation:
1)A chocolate bar measures 10 cm long by 2 cm wide and is 2 cm thick
a)Calculate the volume of one bar.
b)How many bars each 2 cm long, 2 cm wide and 2cm thick have the same total volume?
c)A pendulum makes 10 complete oscillations in 8 seconds. Calculate the time period of the pendulum
Answer:
40cm³
Explanation:
I only have an answer to 1a
Volume = Length X breadth X height
where;
length = 10cm
breadth = 2cm and;
width = 2cm
*Find*
V = ?
V = L X B X H
V = 10 X 2 X 2
= 40cm³✓
A 150 g sample of brass at 100 °C is placed in a Styrofoam cup of water containing 120 mL of water at 10 °C. No heat is lost to the cup or surroundings. What is the final temperature of the mixture? answer in celsius
Answer:
≈19.144°C.
Explanation:
all the details are in the attachment.
Note, that c₁, m₁, t₁ are the parameters of the sample of brass; c₂, m₂ and t₂ are the parameters of the sample of water.
P.S. change the provided design according Your requirements.
A 0.24 kg mass with a speed of 0.60 m/s has a head-on collision with a 0.26 kg mass that is traveling in the opposite direction at a speed of 0.20 m/s. Assuming that the collision is perfectly inelastic, what is the final speed of the combined masses?
The final speed of the combined masses is 0.186m/s
According to the law of collision, the sum of the momentum of the bodies before the collision is equal to the momentum after the collision.
Mathematically;
m1u1 - m2u2 = (m1+m1)v
v is the final speed of the combined masses.Substituting the given parameters;
0.24(0.6) - 0.26(0.2) = (0.24+0.26)v
0.144 - 0.052 = 0.5v
0.092 = 0.5v
v = 0.092/0.5
v = 0.184m/s
Hence the final speed of the combined masses is 0.186m/s
Learn more on collision here: https://brainly.com/question/7538238
Here's a question from ~ [ AIEEE 2002 ]
The minimum velocity ( in m/s ) with which a car driver must traverse a flat curve of radius 150 m and Coefficient of friction 0.6 to avoid skidding is ~
[ I'm looking for Proper Information, and please don't get it from any Website ]
Thanks for Answering !
As car is avoid skidding
[tex]\\ \sf\hookrightarrow \dfrac{mv^2}{r}=\mu mg[/tex]
Cancel m[tex]\\ \sf\hookrightarrow \dfrac{v^2}{r}=\mu g[/tex]
[tex]\\ \sf\hookrightarrow v^2=\mu rg[/tex]
[tex]\\ \sf\hookrightarrow v^2=0.6(10)(150)[/tex]
[tex]\\ \sf\hookrightarrow v^2=60(150)[/tex]
[tex]\\ \sf\hookrightarrow v^2=900[/tex]
[tex]\\ \sf\hookrightarrow v=30ms^{-1}[/tex]
Done
The minimum velocity of the with which the car driver must traverse the flat curve to avoid skidding is 29.7 m/s.
The given parameters:
Radius of the curve, r = 150 mCoefficient of friction, μ = 0.6The minimum velocity of the with which the car driver must traverse the flat curve to avoid skidding is calculated as follows;
[tex]\frac{mv^2}{r} = \mu mg\\\\v^2 = \frac{\mu mgr}{m} \\\\v^2 = \mu gr\\\\v = \sqrt{\mu gr} \\\\v = \sqrt{0.6 \times 9.8 \times 150} \\\\v = 29.7 \ m/s[/tex]
Thus, the minimum velocity of the with which the car driver must traverse the flat curve to avoid skidding is 29.7 m/s.
Learn more about banked roads here: https://brainly.com/question/14777525
What part of the reactor is used to control the speed of the nuclear reaction? How does it work?
Control rods
____________________
Control rods are inserted into the core of a nuclear reactor and adjusted in order to control the rate of the nuclear chain reaction
o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o
how far will an object fall in 3 seconds
Answer:
144.7832 ft
Explanation:
heres the formula i found to solve
v = v₀ + gt
where:
v₀ is the initial velocity (measured in m/s or ft/s);
t stands for the fall time (measured in seconds); and
g is the free fall acceleration (expressed in m/s² or ft/s²).
Without the effect of air resistance, each object in free fall would keep accelerating by 9.80665 m/s (approximately equal to 32.17405 ft/s) every second. In reality, though, a falling object's velocity is constrained by a value called the terminal velocity.
im sorry i couldnt provide more information, but there was not much info provided in the question itself
a truck in a traffic circle travels in a circular path at constant speed v0 while passing through region x of the circle, as shown in figure 1 above. a diagram representing the forces exerted on the truck in region x is shown in figure 2. at a later time a car with less mass than the truck passes through region x at the same speed and the same distance from the center of the traffic circle as the truck. the coefficient of friction between the car’s tires and the ground is the same as that for the truck’s tires and the ground. which of the following diagrams could represent the forces exerted on the car in region x compared to the truck in region x ? assume that the length of each arrow is proportional to the magnitude of the force represented by the arrow.
The Diagram that represents the forces exerted on the car in region x when compared to the truck in region X is : Diagram C
Given that the mass of the car is less than the mass of the truck the force due to gravity will be greater on the truck than it could be on the car
i.e. | Fg |car < | Fg | truck
also : | Fₙ | car < | Fₙ | truck
Since the gravitational force on the car is less than the gravitational force on the truck
| Ff | car < | Ff | truck
where : Ff = frictional force
Fg = force due to gravity
Fn normal force
Therefore from the diagrams attached below the correct diagram that represents the forces exerted on the car in region x when compared to the truck in region X is : Diagram C.
Learn more about gravitational force : https://brainly.com/question/1550731
Attached below is the missing data related to your question
a water balloon is thrown a target at 18 m/s. if the water balloon has a mass of 0.4 kg, what is the momentum?
The momentum of the water balloon at the given speed is 7.2 kgm/s.
The given parameters:
Speed of the water balloon, v = 18 m/sMass of the balloon, m = 0.4 kgThe momentum of the water balloon is calculated as follows;
P = mv
Substitute the given values of mass and velocity as follows;
P = 0.4 x 18
P = 7.2 kg m/s.
Thus, the momentum of the water balloon at the given speed is 7.2 kgm/s.
Learn more about momentum here: https://brainly.com/question/7538238
“Applications of thermal expansion in solids, liquids and gases.”
(Two for each states of matter)
Thermal expansion is the tendency of matter to change its shape dimensions, density in response to a change in temperature.
The following are applications of thermal expansion in various matter.SolidsThe principle of thermal expansion is used in thermostat to regulate the temperature of heating device e.g Electric pressing Iron.Rivets are used to hold steel plates together very tightly.
2. Gases
Hot-air balloons are an application of thermal expansionGases turbine3. Liquids
Engine CoolantsVolume of thermometerLearn more about Expansion of matter here:
https://brainly.com/question/518065
Describe the direction in which each object will accelerate. If the object won't accelerate, write "no acceleration." Explain what might be happening to each object in terms of its overall motion.
A 0.24 kg mass with a speed of 0.60 m/s has a head-on collision with a 0.26 kg mass that is traveling in the opposite direction at a speed of 0.20 m/s. Assuming that the collision is perfectly inelastic, what is the final speed of the combined masses?
The final speed of the combined masses is 0.21 m/s
Applying the law of conservation of momentum:
Total momentum before collision = Total momentum after collision.
⇒ Formula:
MU+mu = V(M+m).................. Equation 1
⇒ Where:
M = mass of the first bodym = mass of the second bodyU = Initial speed of the first bodyu = Initial speed of the second bodyV = common final speed.From the question,
⇒ Given:
M = 0.24 kgU = 0.60 m/sm = 0.26 kgu = -0.20 m/s (traveling in opposite direction)⇒ Substitute these values into equation 1
0.24(0.6)+0.26(-0.20) = V(0.24+0.2)⇒ Solve for V
0.144-0.052 = 0.44V0.44V = 0.092V = 0.092/0.44V = 0.209V ≈ 0.21 m/sHence the final speed of the combined masses is 0.21 m/s
Learn more about speed here: https://brainly.com/question/4931057
A roller coaster goes from 2.00 m/s [forward] to 10.0 m/s [forward) in 4.50 s. What is its acceleration?
What do you feel when you receive your homework?
The feeling can either be positive or negative.
How one feels depends on number of factorsA positive feeling can occur when one performs very well in the given home. Also, a positive feeling can come from a high level of satisfaction in the homework. When you complete your homework on time using the recommended steps, you will be sure to do well on the homework.
In other hand, a negative feeling may result from poor performance in the homework. In ability to complete the homework or missing some steps in the homework can increase your level of trepidation even before seeing your score.
Learn more about homework here: https://brainly.com/question/21380057
if A and B are non zero vectors, is it possible for vector A×vector B and vector A.vector B both to be zero? Justify your answer
Answer:
not able to understand the question