predict whether each of the following molecules is polar or nonpolar. drag the appropriate items to their respective bins.

The balanced equation is mentioned below and the oxidation state of nickel is not change.

What is reaction ?

In a chemical reaction, bonds within reactant molecules are broken and new bonds are established within product molecules to create a new material.

What is oxygen ?

Since oxygen has an atomic number of 8, it is represented by the letter O in its formal chemical formula and has eight protons in its nucleus. All additional flavours, scents, and colours are absent from oxygen while it is at normal temperature. Nature may include molecular oxygen.

NiS is roasted in presence if oxygen (O2) to produce Sulfur dioxide (SO2) gas and solid nickel oxide (NiO)

the oxidation state of the Ni in the NiS is +2 and it does not changes means in the oxide of nickel the oxidation state of the Ni is +2 therefore the oxide is NiO(s)

so the balanced molecular reaction equation is as follows

2NiS(s) + 3O2(g) ----- > 2NiO(s) + 2SO2(g)

Therefore, the balanced equation is mentioned above and the oxidation state of nickel is not change.

Learn more about reaction from the given link.

https://brainly.com/question/11231920

#SPJ4

In this reaction had a mass of 8.159 g. The initial mass of the metal nitrate sample was 9.835 g. Assuming that the reaction goes to completion,  the number of moles of the sulfate salt produced is 1 mole.

The reaction is given as :

M(NO₃)₂   +   Na₂SO₄   ------>    2NaNO₃    +   MSO₄

so, it is clear that , 1 mole of metal nitrate produces 1 mole of metal sulphate.

mass of metal nitrate = 9.835 g

mass of metal sulfate = 8.158 g

moles of metal nitrate = moles of the metal sulfate.

moles = mass / molar mass

Thus, the moles of  MSO₄ = 1 mole.

To learn more about moles here

https://brainly.com/question/26416088

#SPJ4

Answer: CARBON (C)

Explanation: The element that is always present in all organic compounds is carbon. Organic compounds are chemical compounds that contain carbon and hydrogen atoms, and often also contain other elements such as oxygen, nitrogen, and sulfur. Carbon is the fundamental building block of organic compounds, and all organic compounds are derived from carbon-based molecules. This is because carbon has the ability to form a large number of chemical bonds with other atoms, which allows it to form a vast array of complex and diverse molecules. Some common examples of organic compounds include carbohydrates, lipids, proteins, and nucleic acids.

Answer:

Explanation:

All organic compounds contain carbon. Carbon is a chemical element with atomic number 6 and is represented by the symbol C. It is a highly versatile element and can form a vast number of compounds, including carbohydrates, lipids, proteins, and nucleic acids. These compounds are the building blocks of life and are essential for the functioning of living organisms. In addition to carbon, most organic compounds also contain hydrogen and, to a lesser extent, other elements such as oxygen, nitrogen, and sulfur.

To solve such this we must know the concept of double displacement reaction. Therefore the correct option is option B that nitrogen is an unreactive gas.

Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, double displacement reaction.

Because nitrogen and monoxide are both unreactive gases, the water level in the beaker does not change when it's inverted more than a porous pot holding carbon monoxide.

Therefore the correct option is option B among all the given options that nitrogen is an unreactive gas.

Learn more about the chemical reactions, here:

https://brainly.com/question/3461108

#SPJ2

Answer:

Electron affinity is defined as the quantitative measurement of the energy change that results from adding a new electron to a neutral atom or molecule in the gaseous state. The more negative the electron affinity value, the higher an atom’s affinity for electrons.The energy of an atom is stated when an atom loses or gains energy through chemical reactions that cause the loss or gain of electrons. 

The following selection tests should flodrivec conduct to hire the right candidates is cognitive ability test.

The chemical manufacturing company, is moving its administrative office to larger premises; therefore, it currently has various job openings. due to paucity of time, the recruitment manager of flodrivec wants to conduct a common interview test for all the candidates. the work at flodrivec demands its staff to be good at critical thinking, math, verbal reasoning, and quantitative concepts. cognitive ability test used to assess the abilities that involved in the thinking.

Thus, the test used for the selection is the cognitive ability test to hire the right candidates.

To learn more about cognitive ability test here

https://brainly.com/question/29667845

#SPJ4

The right answer is E: Q is the same as Keq when a reaction is at equilibrium.

Market supply and demand must balance one another to reach equilibrium, which leads to stable pricing. In general, when there is an abundance of products or services, prices decline, which increases demand, but when there is a scarcity, prices rise, which decreases demand.

The Latin word libra, which meaning weight or balance, is the word's etymological ancestor. Here are a few instances of equilibrium: a book that is at rest on a table. a vehicle that is driving at a steady speed. a chemical process in which both the forward reaction rate and the backward reaction rate are equal.

Equilibrium types include

To learn more about equilibrium. Please visit the below link.

https://brainly.com/question/28527601

#SPJ4

There are 0.7433 moles in 54.0 grams of Ge(germanium).

The most widespread application of germanium is in the semiconductor sector. Germanium is mixed with trace amounts ( arsenic, gallium, indium, or phosphorus to produce semiconductors for use in digital equipment. Additionally, germanium is utilized to create alloys and is only used as a glow in fluorescent lights.

A firm, glossy, gray-white, brittle metalloid, pure germanium is pure germanium. Its crystalline structure resembles that of a diamond, and it shares silicon's chemical and physical characteristics. With the exception of nitric acid, germanium is unaffected by alkaline solutions and acids and remains stable in both air and water.

1 gram Ge =  0.0137665 moles

54 grams Ge= 0.0137665*54

                     =0.74339 moles

To know more about crystalline structure visit:

https://brainly.com/question/7911118

#SPJ1

The perfect ideal gas equation (PV = nRT) relates the macroscopic residences of perfect gases and thus here the mass of argon is contained in the cylinder is 9.70 kg.

Use the proper fueloline regulation, PV=nRT.

0.08206 L*atm*K-1mol-1 for R, the ideal gas constant.

That approach we want to transform psi to atm via way of means of multiplying 1990 psi via way of means of (1atm/14.7psi).

That offers us a stress of a hundred 35.4 atm Convert 24.7C to Kelvin via way of means of including 273.15.

We want moles for you to calculate the mass of argon, Ar by n = PV/RT.

I get 242.7 moles Ar as about 1 mole occupies 22.4 L at STP, and that we've a stress this is 135 instances better than 1 atm.

Now that we've moles Ar, we will convert that into mass via way of means of multiplying via way of means of argon's molar mass of 39.95g/mole.

Now we get 9695 grams (9700 grams with three sig figs), or 9.70 kg, with three sig figs.

Read more about moles:

https://brainly.com/question/25736513

#SPJ4

molecular formula C10H10O that is obtained when the compound below is heated with aqueous acid is The oxidation of compound [B] results in the formation of compound [C], which is a ketone.

So, compound [B] is a secondary alcohol, and compound [A], from which compound [B] has been generated, is a secondary alkyl bromide. It does not decolorize KK2Cr2O ⟶Ether this is confirmed with BBr /H2, which indicates there is no double bond present. Only one I-group is substituted so the compound is asymmetric. molecular formula is a molecule representation that uses chemical symbols to indicate the types of atoms in the molecule, followed by subscripts to show the number of each type of atom in the molecule. (A subscript is used only when there are multiple atoms of the same type present.)

Learn more about molecular formula here:

https://brainly.com/question/28647690

#SPJ4

A. The synthesis of polymer A from monomers can be represented by the following equation:

Monomer + Monomer --> Polymer A

Where the monomers are represented by the structure –O(CH2)5CO– and the polymer is represented by –[–O(CH2)5CO–]n–.

B. The synthesis of polymer B from monomers can be represented by the following equation:

Monomer + Monomer --> Polymer B

Where the monomers are represented by the structure –OCH2CH2CH2– and the polymer is represented by –(–OCH2CH2CH2–)n–.

It is important to note that these equations are simplified representations of the overall chemical reactions involved in the synthesis of these polymers from monomers, and they do not take into account the specific chemical reactions and conditions that may be required in order to synthesize the polymers.

Compared with minerals that include the positively charged ions of aluminum, iron, magnesium, and calcium, quartz is less vulnerable to chemical weathering by acidic solutions.

Minerals are naturally occurring inorganic solids with specific chemical compositions and crystal structures formed by geological processes. Rocks are aggregates of one or more minerals, but rocks may also contain organic matter and minerals.

Some rocks are mainly composed of only one mineral. Precipitation and temperature can affect the weather. High temperatures and increased precipitation accelerate chemical weathering. Due to its high chemical stability quartz weathers very slowly. It usually breaks down only into small sand-sized particles.

Learn more about Minerals here:- https://brainly.com/question/89259

#SPJ4

The final temperature of the metal and wa- ter mixture, assuming no heat loss to the surrounding is 23.67 degree Celesius.

So, 5 grams of Aluminum and 10 grams of Iron pellets are heated to 100°C and added to 97.3 grams of water.

Final temperature = ?

All the heat given out by the aluminum and iron is absorbed by the water.

=> Let final Temperature be T.

For Heat Gained by Water:

T1 = 22 °C

T = ?

△T = T-22 °C

m = 0.0973 kg

c = 4200 J kg-1 °C-1

Q = 0.0973 kg * 4200 J kg-1 °C-1 * (T-22)  °C

Q1 = 408.66 * (T-22) J

For Heat Lost By Aluminum:

T1 = 100 °C

T = ?

△T = 100-T °C

m = 0.005 kg

c = 890 J kg-1 °C-1

Q = 0.005 kg * 890 J kg-1 °C-1 * (100-T)  °C

Q2 = 4.45 * (100-T) J

For Heat Lost By Iron:

T1 = 100 °C

T = ?

△T = 100-T °C

m = 0.01 kg

c = 450 J kg-1 °C-1

Q = 0.01 kg * 450 J kg-1 °C-1 * (100-T)  °C

Q3 = 4.5 * (100-T) J

Now,

Q1 = Q2 + Q3

408.66 * (T-22) = 4.45 * (100-T) + 4.5 * (100-T)

408.66T - 8990.52 = 445 - 4.45T + 450 - 4.5T

408.66T - 8990.52 = 895 - 8.95T

408.66T + 8.95T = 895 + 8990.52

417.61 T = 9885.52

T = 9885.52/417.61

T = 23.67 °C

The final temperature of the metal and water mixture, assuming no heat loss to the surrounding is 23.67 degree Celsius.

To learn more about final temperature Please click on the given link:

https://brainly.com/question/22338034

#SPJ4

2 - Glycerol. Glycerin, a quick-acting dehydrating fixative that is also utilized for the preservation of anatomical specimens, is another chemical that is employed.

Typically, formaldehyde, glutaraldehyde, methanol, and other solvents are present in embalming fluid. Methanol concentrations can range from 9 to 56%, whereas formaldehyde content typically falls between 5 and 37 percent.

Formaldehyde is used in embalming fluids as a preservation. The simplest aldehyde is formaldehyde, which has the chemical formula HCHO. A solution of formaldehyde in water, typically with a little quantity of methanol added, is called formalin. It is frequently used as an antiseptic, disinfectant, and biological material preserver.

Learn more about antiseptic here:

https://brainly.com/question/13242539

#SPJ4

Answer: Potential signs that chemical reactions have occurred include a change in color, change in temperature, formation of a gas, and formation of a precipitate.

If any of the ions comprising an insoluble ionic solid remain in the solution, The solution must be supersaturated.

Known as a saturated solution, this fluid is created when the maximum amount of solute dissolves at a specific temperature. A solution is said to be supersaturated if there is more solute present than is necessary to reach saturation.

By adding a tiny amount of solute, you can quickly determine if a solution is saturated, supersaturated, or neither. The solute will dissolve in a solution that is not saturated. That is not the case if the solution is saturated. The solute you've added will rapidly form crystals if the solution is supersaturated.

Supersaturation is a non-equilibrium physical state where a solution contains more solute than the equilibrium solubility permits under the circumstances, such as the system's temperature and pressure.

For more information on supersaturation kindly visit to

https://brainly.com/question/16817894

#SPJ4

Calvin cycle chemical formula: 3 CO2 + 6 NADPH + 5 H2O + 9 ATP glyceraldehyde-3-phosphate (G3P) + 2 H+ + 6 NADP+ + 9 ADP + 8 Pi (Pi = inorganic phosphate).

The reduction of 3-phosphoglyceric acid to glyceraldehyde-3 phosphate is carried out using 3 ATP and 2 NADPH molecules.

It takes two G3P molecules to create a six-carbon glucose molecule since each G3P molecule has three fixed carbon atoms. To make one molecule of glucose, the cycle would need to complete six times, which is equivalent to 6 CO2 start text, C, O, end text, start subscript, 2, end subscript, 18 ATP, and 12 NADPH.

To know more about Calvin cycle chemical formula visit :-

https://brainly.com/question/29634535

#SPJ4

ion-dipole, hydrogen bonds, dipole-dipole, and Vander Waals Forces is the order  from strongest to weakest

The strongest electromagnetic forces of attraction that hold together all the opposite charges imparted by the transmission with one or more electrons between two atoms are referred to as ionic bonds (or electron rich bonds). It is the most potent bond because it is formed by the full transfer of electrons. A covalent bond develops while two atoms discuss an electron pair. . It is weaker than an electrostatic interaction since they are formed by electron sharing. The attractive force that unites the hydrogen atom of one chemical compound to an electronegative of the same or different particle is known as a hydrogen bond. It is formed by the a weaker electrostatic attraction than either of the covalent and ionic bonds.

Learn  more about hydrogen bonds here:

https://brainly.com/question/21054466

#SPJ4

The statement that is true for the formation of the alcohols by hydroboration-oxidation sequence is C) overall, the process results in syn addition and anti-Markovnikov orientation.

The hydroboration oxidation is the chemical reaction in the alkenes are converted in to the alcohols. this is the two steps process , the step steps includes the hydroboration and the other steps includes the oxidation. The conversion of the alkenes in to the alcohols is done by the anti markovnikov reaction. it is result of the net addition of the water.

Thus , the hydroboration oxidation done by the syn addition and the anti markovnikov orientation.

To learn more about hydroboration oxidation here

https://brainly.com/question/29238473

#SPJ4

Single-strand-binding proteins are necessary for: inhibiting double-helix formation

Deoxyribonucleic acid is a polymer composed of  polynucleotide chains that coil spherical each one-of-a-kind to form a double helix. The polymer includes genetic instructions for the development, functioning, boom and replica of all seemed organisms and lots of viruses.

In all dwelling things, DNA is vital for inheritance, coding for proteins, and offering instructions for life and its tactics. Human cells commonly consist of 23 pairs of chromosomes, for a complete of forty six chromosomes in every cell.

Most DNA is positioned within the cell nucleus. Mitochondria are the structures within cells that convert the power from meals right into the shape that cells can use.

Learn more about DNA here:- https://brainly.com/question/23030726

#SPJ4

Pre-exponential factor can be obtained from the Arrhenius pre-factor and using this we can calculate the classical rate of proton transfer.

Pre-exponential factor (A) is an important component of the Arrhenius equation, which was formulated by the Swedish chemist Svante Arrhenius in 1889. The pre-exponential factor is also known as the frequency factor. It represents the frequency of collisions between reactant molecules at a standard concentration.  it is actually dependent on temperature because it is related to molecular collision, which is a function of temperature. because the pre-exponential factor depends on frequency of collisions, it is related to collision theory and transition state theory. The collision theory deals with gases and neglects to account for structural complexities in atoms and molecules.

To learn more about Arrhenius exponential factor please visit:

https://brainly.com/question/14781395

#SPJ4

The part of the proper calculation of the mass % of O in acetic acid is option B. % O = 53.29%

The mass of oxygen atoms in a mole of acetic acid is 32.00 g.

The molar mass of acetic acid is 60.05 g/mol.

Calculation :

2×16.00

% O = --------- × 100 = 53.29%

60.05

Acetic acid is used as a food preservative and food additive (known as E260). Large amounts of acetic acid are used in the manufacture of products such as textile inks, dyes, photographic chemicals, pesticides, pharmaceuticals, rubber and plastics. It is also used to remove scale with some household cleaners.

Acetic acid is he second simplest carboxylic acid after formic acid. It is an important chemical reagent and an industrial chemical mainly used in .

Learn more about acetic here : https://brainly.com/question/24304533

#SPJ4

In the reaction, Mg (s) + 2 AgNO3 (aq.) → 2Ag (s) + Mg (NO3)2 (aq.) the half reaction can be written by the reduction and oxidation reaction.

Reduction occurs in this reaction. Since oxidation number of silver changes from +1 to 0. So, it is undergoing reduction in the reaction. This may be decomposed in two half reactions, one for the oxidation of the electron donor and one for the reduction of the electron acceptor. The oxidation of a substance follows a second-order kinetics dependent not only on the substrate concentration but also on the oxidizing agent concentration. The same holds for the reductions with regard to the reducing agent concentrations.

To learn more about Oxidation reduction reaction please visit:

https://brainly.com/question/11672211

#SPJ4

Some functional groups contain a heteroatom, Some functional groups contain a multiple bond, some functional groups contain both a heteroatom and a multiple bond. these statements correctly describe functional groups.

functional group in organic chemistry is a substance or amide in a particle that creates the molecule's distinctive feature chemical reactions. Regardless of the rest of the molecule's composition, the same functional group will undergo the same or similar chemical reactions. Functional groups are collections of one or more atoms that have distinct chemical properties regardless of what they are attached to. Covalent bonds communicate the particles of functional groups to each other and to the remainder of the molecule. All life processes, such as nourishment, excretion, and respiration, can be carried out by a cell. As a result, it is known as the functional unit of life. All living beings are made up of cells, which are the smallest unit of life.

Learn more about functional group here:

https://brainly.com/question/14618322

#SPJ4

Entropy measures Temperature at constant volume. hence the option b is correct for the entropy measures.

Entropy is the measurement of the amount of thermal energy per unit of temperature in a system that cannot be used for productive work. Entropy is a measure of a system's molecular disorder or unpredictability since work is produced by organized molecular motion. Take an energy reading at a given temperature to calculate entropy. To measure the thermal energy transferred at a certain temperature, a calorimeter is typically used. Maintain the temperature value mathematically constant by assuming only extremely slight variations in the process's conditions.

to know more about entropy measures please visit.

https://brainly.com/question/22145368

#SPJ4

Foams have the capability of recovering any gaps created by firefighters walking through and disturbing the foam layer is  Aqueous film-forming foam

Fire suppressants like aqueous film-forming foam (AFFF) are used to put out flammable liquid fires like fuel fires.

AFFF is frequently employed in fire fighting apparatus, shipboard and land-based facility fire suppression systems, and fire training facilities. According to the amount of water it is mixed with, AFFF is often sold as a concentrate and is referred to as "3%" or "6%" (Type 3 or Type 6, respectively).

To avoid long-term harmful effects on human health or the environment, containment and cleanup may be necessary when AFFF is used, discharged, or released into the environment.

Learn more about firefighting foam:

https://brainly.com/question/29524190

#SPJ4

In the following three sets of molecules, indicate the preferred product for the different set of conditions as follows-

Molecules are a type of particle that is made up of two or more atoms that are chemically bonded together. Molecules can be found in all types of physical matter, from air to water to rocks and even in living organisms. Molecules are the building blocks of life, as they are responsible for the structure and function of every living organism. Molecules can also be used to describe many chemical compounds and interactions. The size, shape, and arrangement of molecules can affect the properties of a substance, and the way molecules interact with one another can determine the way a substance behaves.

Alkenes: Under cationic conditions, alkenes prefer to form an addition product, such as a Markovnikov addition product. Under radical conditions, alkenes prefer to form an elimination product.

Alkynes: Under cationic conditions, alkynes prefer to form an addition product, such as a Markovnikov addition product. Under radical conditions, alkynes prefer to form a substitution product.

Aromatic Compounds: Under cationic conditions, aromatic compounds prefer to form a substitution product. Under radical conditions, aromatic compounds prefer to form an addition product.

To know more about molecules click-

https://brainly.com/question/475709

#SPJ4

Answer:

The correct statements that explain the correlation between the increase in temperature and the increase in reaction rate are:

More atom-atom stretching and bending within the molecules occurs at higher temperatures, which creates more reactive molecular configurations.

Molecules at higher temperatures have greater kinetic energy, which results in more frequent and higher energy collisions.

Added heat decreases the activation energy of a reaction and has a similar effect as adding a catalyst.

These statements are correct because they all describe mechanisms by which an increase in temperature can increase the rate of a chemical reaction. When the temperature is increased, the molecules of the reactants gain more kinetic energy, which causes them to move faster and collide more frequently. This can lead to more reactive configurations of the molecules, which makes it easier for them to react with each other. Additionally, the added heat can decrease the activation energy of the reaction, which means that it takes less energy for the reactants to overcome the energy barrier and form the products. This makes the reaction more likely to occur, and it increases the overall reaction rate. Finally, an increased temperature can also improve the reaction pathway by decreasing the energy difference between reactants and products, which can further increase the reaction rate.

The table showed that when the concentration of X was doubled, the initial reaction rate (r1) quadrupled.

Reactant is an element or compound that participates in a chemical reaction. It is one of the components of a chemical reaction, the other being the product. Reactants are usually the starting materials that are present before the reaction occurs, while products are the materials formed after the reaction. Reactants can be either elements or compounds, and they often undergo chemical changes during the reaction.

This indicates that the reaction is first-order with respect to X. Similarly, when the concentration of Y2 was doubled, the initial reaction rate (r2) quadrupled, indicating that the reaction is first-order with respect to Y2. This suggests that the overall reaction is second-order. From the data, it appears that the rate of reaction is proportional to the product of the concentrations of X and Y2.

To know more about reactant click-

https://brainly.com/question/26283409

#SPJ4