Plzzzzz I need help asap thank you
No links plzzzzz

Answer:

(a + 4)(b + 1)

Step-by-step explanation:

ab + 4 + a + 4b

Rearrange the expression to find the GCF.

ab + a + 4b + 4

Now find the GCF.

a (b + 1) + 4 (b + 1)

Divide the whole thing by b+1

(a + 4)(b + 1)

Based on the given sample, there is sufficient evidence to conclude that the mean is greater than 3.16 at a significance level of 5%.

To perform a hypothesis test, we need to state the null hypothesis and alternative hypothesis.

We want to test if the mean is greater than 3.16.

Null hypothesis (H0): μ ≤ 3.16 (Mean is less than or equal to 3.16)

Alternative hypothesis (Ha): μ > 3.16 (Mean is greater than 3.16)

Now, we can proceed with the hypothesis test.

We'll use a one-sample t-test since we don't know the population standard deviation and our sample size is relatively small.

The sample mean (X) and sample size (n) from the given data.

X= (3.4 + 2.5 + 4.8 + 2.9 + 3.6 + 2.8 + 3.3 + 5.5 + 3.7 + 2.8 + 4.4 + 4 + 5.2 + 3 + 4.8) / 15 = 3.66

n = 15

Now calculate the test statistic (t-value).

t = (X - μ) / (sd / √n)

= (3.66 - 3.16) / (1.05 / √15)

≈ 2.26

Since our alternative hypothesis is one-tailed (μ > 3.16), we need to find the critical value for a significance level of 5% in the right tail of the t-distribution.

Using a t-table, the critical value for a one-tailed test with α = 0.05 and degrees of freedom (df) = n - 1 = 15 - 1 = 14 is 1.761.

If the test statistic is greater than the critical value, we reject the null hypothesis.

t-value (2.26) > critical value (1.761)

Since the test statistic is greater than the critical value, we reject the null hypothesis.

To learn more on Statistics click:

https://brainly.com/question/30218856

#SPJ4

Answer:

YUH

Step-by-step explanation:

Answer:

you'll see...

Step-by-step explanation:

Given that the transformed graph is of function f(x) = (x + 2)^4 + 6 and the parent function g(x) = x^4

The transformed graph function g(x) was shifted two (2) units to the left and was translated six (6) units upward.

When the function is shifted to the right, the factor of x will be negative and when it's shifted to the left, the factor of x will be positive.

Therefore, function g(x) = x^4 is shifted 2 units to the left and translated 6 units upward to form f(x) = ( x + 2 )^4 + 6.

Answer:

2+3=5

Step-by-step explanation:

prime numbers =2 and 3

sum =5 which is odd

Answer:

333 :)

Step-by-step explanation:

Answer:

Length of rectangle = 51 cm

Width of rectangle = 24 cm

Step-by-step explanation:

Given:

Perimeter of rectangle = 150 cm

Find:

Length and width of the rectangle

Computation:

Assume;

Width of rectangle = a cm

Length of rectangle = 2a + 3 cm

Perimeter of rectangle = 2[l + b]

150 = 2[(2a + 3) + a]

2[3a + 3] = 150

6a + 6 = 150

6a = 144

a = 24

Width of rectangle = 24 cm

Length of rectangle = 2a + 3 cm

Length of rectangle = 2(24) + 3 cm

Length of rectangle = 51 cm

Answer:

x= 8

Step-by-step explanation:

17x + 3 = 139

17x = 136

x = 8

Answer:

it represents a variable

Step-by-step explanation:

The number 8 is the coefficient of the variable k.

A coefficient in mathematics is a multiplicative factor in a polynomial term, a series term, or an expression. It is typically a number, but it can also be any expression. They may also be referred to as parameters if the coefficients are variables in and of themselves.

Given that the expression is 8k + 5. In the given expression the number 8 is the coefficient of the given expression.

To know more about coefficient follow

https://brainly.com/question/17469127

#SPJ6

To express the function [tex]\(G\)[/tex] in the form [tex]\(f \circ g\)[/tex] , where [tex]\(y = f(g(x))\)[/tex] , we need to find suitable non-identity functions [tex]\(f(x)\)[/tex] and [tex]\(g(x)\)[/tex] that can be composed to yield [tex]\(G(x)\)[/tex].

Let's choose [tex]\(g(x) = \frac{1}{x}\)[/tex]  and [tex]\(f(x) = x + 8\)[/tex].

Now, we can express [tex]\(G\)[/tex] as  [tex]\(G(x) = f(g(x))\)[/tex] , which becomes:

[tex]\[G(x) = f(g(x)) = f\left(\frac{1}{x}\right) = \frac{1}{x} + 8\][/tex]

Therefore, the functions [tex]\(f(x)\)[/tex] and [tex]\(g(x)\)[/tex] that can be composed to yield [tex]\(G(x) = \frac{1}{x} + 8\) are \(f(x) = x + 8\)[/tex] and [tex]\(g(x) = \frac{1}{x}\)[/tex].

To know more about probabilities visit-

brainly.com/question/32512587

#SPJ11

Using the CVP Formulas to solve the following. JBL Speakers has annual fixed costs of $2,450,000, and variable costs of $25 per unit. The selling price per unit is $90.

A) 37,692 units

B) 53,077 units

A) To calculate the annual revenue required to break even, we need to find the point where total revenue equals total costs.

Total cost (TC) = Fixed costs (FC) + Variable costs per unit (VC) * Quantity (Q)

Total revenue (TR) = Selling price per unit (SP) * Quantity (Q)

At the break-even point, total revenue equals total cost:

TR = TC

SP * Q = FC + VC * Q

Substituting the given values:

$90 * Q = $2,450,000 + $25 * Q

$90Q - $25Q = $2,450,000

$65Q = $2,450,000

Q = $2,450,000 / $65

Q ≈ 37,692.31

Therefore, approximately 37,692 units need to be sold to break even.

B) To calculate the annual unit sales required to make a $1,000,000 profit, we can use the following formula:

Profit (P) = (SP * Q) - (FC + VC * Q)

Substituting the given values and the desired profit:

$1,000,000 = ($90 * Q) - ($2,450,000 + $25 * Q)

$90Q - $25Q = $1,000,000 + $2,450,000

$65Q = $3,450,000

Q = $3,450,000 / $65

Q ≈ 53,076.92

Therefore, approximately 53,077 units need to be sold to make a $1,000,000 profit.

In conclusion, to break even, JBL Speakers needs to generate an annual revenue of approximately $2,450,000, and to make a $1,000,000 profit, they need to sell approximately 53,077 units annually.

To know more about variable , visit :

https://brainly.com/question/29192928

#SPJ11

Answer:

15

Step-by-step explanation:

Prime Numbers Check

15: 5 * 3

30: 2 * 3 * 5

75: 3 * 5 * 5

Both 3 and 5 are prime numbers present in all 3 greater numbers, then you multiply them

3*5 = 15

GCF is 15

Answer:

y+x = -4

Step-by-step explanation:

-4 indicates where the line intercept the y axis

if we put y=0 we can find where line intercepts the x axis.

it results x = -4

the two values are negative

The probability of exactly 8 green peas is 0.475, rounded to three decimal places, i.e., 0.475.

We can use the binomial probability formula to solve this problem.

The formula is given as; $$P(X=k)={n\choose k}p^k(1-p)^{n-k}$$

Where;
n= sample size=12
k= number of green peas=8
p= probability of getting a green pea=3/4
q= probability of getting a yellow pea=1/4
Since we want the probability of exactly 8 green peas out of 12 peas,

we will plug in the values in the formula to get;

$$P(X=8)={12\choose 8}(\frac{3}{4})^8 (1-\frac{3}{4})^{12-8}$$$$

P(X=8)={12\choose 8}(\frac{3}{4})^8(\frac{1}{4})^{4}$$$$P(X=8)=495

(0.3164)(0.0039)$$$$P(X=8)=0.4749$$

Therefore, the probability of exactly 8 green peas is 0.475, rounded to three decimal places, i.e., 0.475.

know more about binomial probability

https://brainly.com/question/12474772

#SPJ11

At time t = 0, the capacitor in the circuit is charged to its maximum charge, qmax, and the circuit has zero current.

At t = 0, the capacitor in the circuit is fully charged, which means it has accumulated its maximum charge, qmax. The capacitor acts as a temporary energy storage device in the circuit. When the capacitor is fully charged, it contains potential energy. The charge on the capacitor creates an electric field, which opposes the flow of current through the circuit.

Since the capacitor is fully charged at t = 0, it resists any change in the current. Therefore, the circuit has zero current flowing through it. As time progresses, the capacitor will start to discharge, releasing the stored energy and allowing the current to flow. The discharge process is governed by the relationship between the voltage across the capacitor, the capacitance of the capacitor, and the resistance in the circuit.

Finally, at t = 0, the capacitor in the circuit is charged to its maximum capacity, qmax, and the circuit has zero current flowing through it.

Learn more about time here:

https://brainly.com/question/1649360

#SPJ11

A spinner has three same-sized sectors numbered 1, 3, and 5. The spinner is spun once and a coin is tossed. H represents heads, and T represents tails.

The sample space of outcomes is given below: Sample Space of Outcomes: {1H, 1T, 3H, 3T, 5H, 5T}Explanation: In this given problem, the spinner has three same-sized sectors numbered 1, 3, and 5. It indicates that the probability of each sector is equal. The spinner is spun once and a coin is tossed, where H represents heads, and T represents tails. It means that the spinner will land on one of three sectors, and the coin will land on either heads or tails.Therefore, the sample space of outcomes is {1H, 1T, 3H, 3T, 5H, 5T}.

To determine the sample space of outcomes for this situation, we need to consider the possible combinations of the spinner's numbers (1, 3, 5) and the outcomes of the coin toss (H for heads, T for tails).

The spinner has three sectors numbered 1, 3, and 5. Therefore, there are three possible outcomes for the spinner.

The coin toss can result in two outcomes: heads (H) or tails (T).

To find the sample space, we need to consider all possible combinations of the spinner outcomes and the coin toss outcomes.

The sample space of outcomes can be listed as follows:

{1H, 1T, 3H, 3T, 5H, 5T}

Therefore, the sample space of outcomes for this situation consists of the six possible combinations: 1H, 1T, 3H, 3T, 5H, and 5T.

To know more about  tails, visit:

https://brainly.com/question/30284307

#SPJ11

Given information is that, a spinner has three same-sized sectors numbered 1, 3, and 5. The spinner is spun once and a coin is tossed. h represents heads, and t represents tails. We need to find the sample space of outcomes.

The required sample space of outcomes is {1H, 1T, 3H, 3T, 5H, 5T}.

We can use the formula for the sample space,

Sample space = Set of all possible outcomes.

The possible outcomes of the spinner are 1, 3, and 5. The possible outcomes of the coin are H and T. Therefore,

Sample space of outcomes = {1H, 1T, 3H, 3T, 5H, 5T}.

Hence, the required sample space of outcomes is {1H, 1T, 3H, 3T, 5H, 5T}.

To know more about sample space visit

https://brainly.com/question/17144524

#SPJ11

Answer: 7pi

Step-by-step explanation: If it completes the circumference distance (14pi) of the circle in 20 seconds, in 10 seconds it will complete half of that. or 7pi. Hope this helped!

:.the distance travelled after 10sec. =7πm

Answer:

in 20 sec distance travelled =2πr=2π×7=14πm

in 10 sec distance travelled=14πm×10/20=7πm

Answer:

First find the unit rate for julie

3 hours/45 dollars

0.066 hours/1 dollar

Now based off table, find Jacksons

y = 25x

if x = 1, y would be 25

25 - .066 = 24.934 dollars

Step-by-step explanation:

Answer:

p < 2

Step-by-step explanation:

hope this is right and have a good day

Answer: quadratic model, 0.866

Step-by-step explanation:

Answer:

d=2_f - 9h_f

Step-by-step explanation:

es la segunda opción

Answer:

It depends on the type of function, but essentially the process is the same

Step-by-step explanation:

You gather up all of the y values and x values and plot them onto a coordinate grid. If you are using a calculator, go to the "y=" button and input the function and then hit "graph"

The hair color of the players on a tennis team would be considered nominal data. Therefore, the most appropriate answer is option (c): Nominal data.

In data classification, there are four main levels of measurement: nominal, ordinal, interval, and ratio. Nominal data is the lowest level of measurement and represents categories or labels that cannot be ranked or ordered. Hair color falls into this category as it represents different categories or labels such as blonde, brunette, red, etc. Nominal data does not have any inherent numerical value or order.

On the other hand, ordinal data represents categories that can be ordered or ranked but do not have a consistent interval between them. Interval and ratio data involve numerical values with a consistent interval and a true zero point, with ratio data having a meaningful zero point.

To know more about ratio click here: brainly.com/question/13419413 #SPJ11

The value of the triple integral ∭E 4xy dV is 2/5. The limits of integration for x are from 0 to 1, and for y, the limits are from 0 to 1 - x, as y is bounded by the line x + y = 1.

To evaluate the triple integral ∭E 4xy dV, where E lies under the plane z = 1 + x + y and above the region in the xy-plane bounded by the curves y = 0, y = 1, and x = 1, we need to set up the integral using appropriate limits of integration.

The region in the xy-plane is a triangle bounded by the lines y = 0, y = 1, and x = 1. Therefore, the limits of integration for x are from 0 to 1, and for y, the limits are from 0 to 1 - x, as y is bounded by the line x + y = 1.

Now, let's determine the limits for z. The plane z = 1 + x + y intersects the xy-plane at z = 1, and as we move up in the positive z-direction, the plane extends infinitely. Thus, the limits for z can be taken from 1 to infinity.

Now, we can set up the triple integral:

∭E 4xy dV = ∫[0 to 1] ∫[0 to 1-x] ∫[1 to ∞] 4xy dz dy dx

The innermost integral with respect to z evaluates to z times the integrand:

∭E 4xy dV = ∫[0 to 1] ∫[0 to 1-x] [4xy(1 + x + y)] evaluated from 1 to ∞ dy dx

Simplifying further:

∭E 4xy dV = ∫[0 to 1] ∫[0 to 1-x] (4xy(1 + x + y) - 4xy(1)) dy dx

∭E 4xy dV = ∫[0 to 1] ∫[0 to 1-x] 4xy(x + y) dy dx

Now, we can integrate with respect to y:

∭E 4xy dV = ∫[0 to 1] [2xy²(x + y)] evaluated from 0 to 1-x dx

Simplifying further:

∭E 4xy dV = ∫[0 to 1] 2x(1-x)²(x + (1-x)) dx

∭E 4xy dV = ∫[0 to 1] 2x(1-x)² dx

Evaluating the integral:

∭E 4xy dV = 2/5

Therefore, the value of the triple integral ∭E 4xy dV is 2/5.

Learn more about triple integral here

https://brainly.com/question/17206296

#SPJ11

The 90% confidence interval for the true population mean textbook weight, based on the given data, is approximately 41.44 ounces to 42.56 ounces.

To construct a confidence interval for the population mean textbook weight, we can use the formula:

Confidence Interval = sample mean ± (critical value * standard error)

Given that the sample mean is 42 ounces and the population standard deviation is 3.8 ounces, we need to determine the critical value and the standard error.

For a 90% confidence interval, the critical value corresponds to a two-tailed z-score of 1.645 (from the standard normal distribution).

The standard error can be calculated as the population standard deviation divided by the square root of the sample size. Since the sample size is not provided, we cannot calculate the exact standard error. However, if we assume a large sample size (usually considered to be greater than 30), we can use the formula for the standard error.

Assuming a large sample size, the standard error would be 3.8 ounces divided by the square root of the sample size.

Using the formula for the confidence interval, we can now calculate the range:

Confidence Interval = 42 ± (1.645 * standard error)

Substituting the values, we get:

Confidence Interval = 42 ± (1.645 * 3.8 / sqrt(sample size))

Since we do not know the sample size, we cannot calculate the exact confidence interval. However, based on the given data, we can conclude that the true population mean textbook weight falls between approximately 41.44 ounces and 42.56 ounces with 90% confidence.

Learn more about confidence interval here:

https://brainly.com/question/32546207

#SPJ11