1. The plot without Rudbeckia has H = 1.86, while the plot with Rudbeckia has H = 1.88. Also, the plot with Rudbeckia has higher species richness and slightly higher species diversity than the plot without Rudbeckia.
2. By adding Rudbeckia to the plot increased species richness by 1 and species diversity (H) by 0.02.
1. To calculate species richness and diversity:
- Species richness: Count the number of species in each plot. The plot without Rudbeckia has 9 species (A, B, C, D, E, F, G, H, I), while the plot with Rudbeckia has 10 species (A, B, C, D, E, F, G, H, I, J).
- Shannon diversity index (H): Use the formula H = - Σ(pi * ln(pi)), where pi is the proportion of each species in the plot. The plot without Rudbeckia has H = 1.86, while the plot with Rudbeckia has H = 1.88.
So, the plot with Rudbeckia has higher species richness and slightly higher species diversity than the plot without Rudbeckia.
2. To calculate the change in species richness and diversity:
- Change in species richness: 10 - 9 = 1
- Change in species diversity (H): 1.88 - 1.86 = 0.02
So, adding Rudbeckia to the plot increased species richness by 1 and species diversity (H) by 0.02.
To know more about "Shannon diversity index" refer here:
https://brainly.com/question/29808103#
#SPJ11
1. The plot without Rudbeckia has H = 1.86, while the plot with Rudbeckia has H = 1.88. Also, the plot with Rudbeckia has higher species richness and slightly higher species diversity than the plot without Rudbeckia.
2. By adding Rudbeckia to the plot increased species richness by 1 and species diversity (H) by 0.02.
1. To calculate species richness and diversity:
- Species richness: Count the number of species in each plot. The plot without Rudbeckia has 9 species (A, B, C, D, E, F, G, H, I), while the plot with Rudbeckia has 10 species (A, B, C, D, E, F, G, H, I, J).
- Shannon diversity index (H): Use the formula H = - Σ(pi * ln(pi)), where pi is the proportion of each species in the plot. The plot without Rudbeckia has H = 1.86, while the plot with Rudbeckia has H = 1.88.
So, the plot with Rudbeckia has higher species richness and slightly higher species diversity than the plot without Rudbeckia.
2. To calculate the change in species richness and diversity:
- Change in species richness: 10 - 9 = 1
- Change in species diversity (H): 1.88 - 1.86 = 0.02
So, adding Rudbeckia to the plot increased species richness by 1 and species diversity (H) by 0.02.
To know more about "Shannon diversity index" refer here:
https://brainly.com/question/29808103#
#SPJ11
You use a cotton swab to collect bacteria from the bottom of your shoe for an experiment. Why do you need to discard the swab in a biohazard bag when finished with it? a. The cotton swab came into contact with a media plate b. Everything used in a microbiology lab goes in biohazard regardless of the luzard it presents c. The swab is now contaminated with microbes from the environment and should not be discarded with normal trash d. The swab contains a culture medium that could facilitate bacterial growth
The correct answer is c.
The swab is now contaminated with microbes from the environment and should not be discarded with normal trash. When collecting bacteria from the bottom of a shoe, the cotton swab comes into contact with various microorganisms that may be harmful to human health. Therefore, it is important to dispose of the swab properly in a biohazard bag to prevent any potential contamination of the environment. Even if the swab did not come into contact with a media plate or contain a culture medium, it still should be treated as a biohazard due to the possibility of carrying harmful bacteria.
Learn more about microbes here-
https://brainly.com/question/14571536
#SPJ11
name and explain the purpose of the constitution that protects citizens against the human right violation of life (2 marks)
The constitution that protects citizens against the human right violation of life is the Universal Declaration of Human Rights (UDHR), which was adopted by the United Nations General Assembly in 1948. The purpose of the UDHR is to provide a common standard of human rights that should be universally respected and protected. Specifically, Article 3 of the UDHR states that "everyone has the right to life, liberty, and security of person," which means that individuals should be protected against any actions that could threaten their lives, including unlawful killing, torture, and other cruel, inhuman, or degrading treatment or punishment. Therefore, the UDHR serves as an important document to ensure that individuals' fundamental rights are protected, including the right to life.
in a prokaryotic cell, none of the trnas coding for arg are charged.
In a prokaryotic cell, the process of charging tRNAs with their corresponding amino acids is carried out by aminoacyl-tRNA synthetases.
These enzymes specifically recognize the tRNA molecule and the corresponding amino acid, and then catalyze the attachment of the amino acid to the tRNA. However, if none of the tRNAs coding for arginine are charged, it could indicate a deficiency or malfunction in the aminoacyl-tRNA synthetase responsible for charging those specific tRNAs. This could potentially lead to issues in protein synthesis and cellular function, as arginine is an essential amino acid needed for proper protein synthesis and various metabolic processes.
To know more about prokaryotic cell, click here:
brainly.com/question/29771587
#SPJ11
create the truth table that belongs to the following multiplexer implementing function f(a, b, c).
To create the truth table, we need to list all of the possible input combinations for a, b, and c, and then calculate the corresponding output based on the function f.
Here's what the truth table would look like:
| a | b | c | f(a, b, c) |
|----|----|---|-------------|
| 0 | 0 |0 | 0 |
| 0 | 0 | 1 | 1 |
| 0 | 1 | 0 | 0 |
| 0 | 1 | 1 | 0 |
| 1 |0 | 0 | 1 |
| 1 | 0 | 1 | 1 |
| 1 | 1 | 0 | 1 |
| 1 | 1 | 1 | 1 |
A multiplexer, also known as a MUX, is a type of digital switch that selects one input signal from multiple sources and routes it to a single output line.
The selection of the input is controlled by a set of control signals, which are typically binary.
In the case of a 3-input multiplexer, like the one we have here with inputs a, b, and c, there are 2^3 = 8 possible combinations of input signals that can be selected. Each combination will produce a unique output, which is the result of the function f(a, b, c) that is being implemented.
In this truth table, all of the possible input combinations for a, b, and c are listed, and the corresponding output is calculated based on the function f(a, b, c) that is being implemented. As we can see, the output depends on the values of a, b, and c, and can be either 0 or 1 depending on the input combination.
Learn more about the truth table: https://brainly.com/question/28032966
#SPJ11
What are the greatest ways that insects have harmed us and shaped human society.
Insects have harmed us by spreading disease, damaging crops, and causing economic losses. They have shaped human society through pollination and inspiring technological innovations.
Insects such as mosquitoes, fleas, and ticks have spread diseases such as malaria, typhus, and Lyme disease, causing significant harm to human populations. Insects such as locusts and aphids have damaged crops, leading to food shortages and economic losses. However, insects have also had positive impacts on human society. For example, bees and other pollinators play a critical role in agriculture, and without them, many crops would not exist. Insects have also inspired technological innovations such as the development of velcro, which was inspired by the hooks on burdock seeds. Overall, insects have both harmed and benefited human society and continue to play an important role in our lives.
Learn more about Insects here:
https://brainly.com/question/28174759
#SPJ11
in e. coli, what mechanism provides genetic variation?
In E. coli, genetic variation can be provided by several mechanisms, including Transformation: E. coli can take up and incorporate DNA from the environment, allowing for the acquisition of new genes and traits.
Conjugation: E. coli can transfer genetic material to other bacteria through a process called conjugation. This allows for the spread of beneficial traits, such as antibiotic resistance, between bacterial populations.
Transduction: E. coli can be infected by bacteriophages, which can transfer DNA from one bacterium to another. This can introduce new genetic material and provide genetic variation.
Mutation: E. coli, like all organisms, can undergo spontaneous mutations in their DNA. These mutations can create new genetic variations and traits that may be beneficial, detrimental, or neutral to the bacterium's survival and reproduction.
Overall, these mechanisms of genetic variation in E. coli allow for adaptation and evolution of the bacteria in response to changes in their environment, including the presence of antibiotics and other selective pressures.
To know more about Mutation
brainly.com/question/17130462
#SPJ11
some amino acids can link to each other by bridges made of
Some amino acids can link to each other by bridges made of peptide bonds.
How are peptide bonds made?
These bonds form between the carboxyl group of one amino acid and the amino group of another, resulting in a long chain of amino acids called a polypeptide. The sequence of nucleotides in a DNA molecule determines the sequence of amino acids in a protein. This process of reading the DNA code and synthesizing a protein is called translation.
Some amino acids can link to each other by bridges made of peptide bonds. During the process of translation, amino acids are joined together by these peptide bonds to form a polypeptide chain, which ultimately folds into a functional protein. The translation is the process by which the genetic information encoded in a nucleotide sequence of mRNA is translated into a sequence of amino acids in a protein.
To know more about peptide bonds, visit:
https://brainly.com/question/28295128
#SPJ11
Some amino acids can link to each other by bridges made of peptide bonds.
How are peptide bonds made?
These bonds form between the carboxyl group of one amino acid and the amino group of another, resulting in a long chain of amino acids called a polypeptide. The sequence of nucleotides in a DNA molecule determines the sequence of amino acids in a protein. This process of reading the DNA code and synthesizing a protein is called translation.
Some amino acids can link to each other by bridges made of peptide bonds. During the process of translation, amino acids are joined together by these peptide bonds to form a polypeptide chain, which ultimately folds into a functional protein. The translation is the process by which the genetic information encoded in a nucleotide sequence of mRNA is translated into a sequence of amino acids in a protein.
To know more about peptide bonds, visit:
https://brainly.com/question/28295128
#SPJ11
the distribution of blood types for 100 americans is listed in the table. if one donor is selected at random, find the probability of not selecting a person with blood type ba. 0.01b. 0.10c. 0.99d. 0.05
The distribution of blood types for 100 Americans is listed in the table. If one donor is selected at random, the probability of not selecting a person with blood type would be 0.96.
Determining the probability of not selecting a person with blood type ba:
To find the probability of not selecting a person with blood type ba, we need to first determine the percentage of Americans with blood type ba. Looking at the table, we see that 4% of Americans have blood type ba.
Therefore, the probability of selecting a person with blood type ba is 0.04.
To find the probability of not selecting a person with blood type ba, we can subtract this probability from 1:
1 - 0.04 = 0.96
So the probability of not selecting a person with blood type ba is 0.96.
Therefore, the answer is c. 0.99 is incorrect because it represents the probability of not selecting a person with blood type a, not ba. 0.01, 0.05, and 0.10 are also incorrect because they do not take into account the percentage of Americans with blood type ba.
To know more about blood groups, visit:
https://brainly.com/question/17052766
#SPJ11
What is the difference between ‘pGLO’ and ‘GFP?’ What type of molecules is each one?
pGLO is a plasmid, which is a small, circular piece of DNA that is separate from the chromosomal DNA in a cell.
GFP is on the other hand, is a protein.
pGLO and GFP are both molecular biology terms, but they refer to different things.
pGLO is a plasmid, which is a small, circular piece of DNA that is separate from the chromosomal DNA in a cell. Plasmids often carry genes that provide some kind of advantage to the cell, such as antibiotic resistance or the ability to produce a specific protein. In the case of pGLO, it is a plasmid that contains the gene for green fluorescent protein (GFP), as well as an additional gene for resistance to the antibiotic ampicillin.
GFP is on the other hand, is a protein. It is a naturally occurring protein that is found in some species of jellyfish, and it has the unique property of fluorescing green when exposed to blue light. The gene for GFP has been widely studied and is often used as a reporter gene in molecular biology experiments, as it allows researchers to track the expression and localization of the protein within cells.
So while pGLO contains the gene for GFP, it is not itself a protein. Rather, pGLO is a plasmid, a type of DNA molecule, that carries the gene for GFP. GFP, on the other hand, is a protein that is produced by cells that have been genetically modified to contain the GFP gene.
Visit to know more about Plasmid:-
brainly.com/question/7826558
#SPJ11
what is the difference in the number of potential rna combinations that can exist with a single-base rna code and a three-base rna code?
The difference in the number of potential RNA combinations that can exist with a single-base RNA code and a three-base RNA code is significant.
A single-base RNA code can have four possible combinations: A, U, C, and G. In contrast, a three-base RNA code (also known as a codon) can have 64 possible combinations (4x4x4). This allows for a greater variety of amino acids to be encoded, which leads to greater protein diversity. Additionally, the three-base RNA code is more robust against mutations, as a single mutation is less likely to completely change the amino acid sequence of a protein.
In summary, the use of a three-base RNA code allows for a significantly greater number of potential combinations and greater protein diversity compared to a single-base RNA code.
Learn more about codon here:
https://brainly.com/question/30972471
#SPJ11
Scientists classify organisms into groups based on
I. evolutionary phylogeny.
II. DNA analysis.
III. embryology.
IV. morphology.
A.
I, II, and III only
B.
I, II, III, and IV
C.
I and III only
D.
I, III, and IV only
Reset
Answer:
B. I, II, III, and IV
Scientists classify organisms into groups based on all of the choices listed
Evolutionary phylogeny refers to the evolutionary history of a species, and scientists use this information to group organisms into different categories based on their shared ancestry. DNA analysis is also a crucial tool for determining evolutionary relationships between different organisms.
Embryology involves studying the development of embryos, and similarities in embryonic development can help scientists identify evolutionary relationships between organisms.
Morphology, which refers to the physical structure and form of an organism, is another key factor in classifying organisms. Scientists use similarities in anatomical features such as bone structure, internal organs, and other physical characteristics to group organisms into different categories.
Therefore, based on the above explanation, the correct answer is B, which includes all of them.
Have a good day!
Rank the following branches of the bronchial tree in the order a molecule of oxygen would encounter them as it moves from the trachea into the left lung. _____ a. alveolar duct _____ b. alveolus _____ c. bronchiole _____ d. lobar bronchus _____ e. main bronchus _____ f. respiratory bronchiole _____ g. segmental bronchus
Answer:
e. Main bronchus
d. Lobar bronchus
g. Segmental bronchus
c. Bronchiole
f. Respiratory bronchiole
a. Alveolar duct
b. Alveolus
Explanation:
The correct order a molecule of oxygen would encounter the branches of the bronchial tree as it moves from the trachea into the left lung is:
e. Main bronchus
d. Lobar bronchus
g. Segmental bronchus
c. Bronchiole
f. Respiratory bronchiole
a. Alveolar duct
b. Alveolus
The main bronchus is the first branch of the bronchial tree that leads into the left lung. It then divides into the lobar bronchi, which further divide into segmental bronchi. The segmental bronchi lead into the bronchioles, which then lead into the respiratory bronchioles. The respiratory bronchioles then lead into the alveolar ducts, which finally open into the alveoli, where gas exchange takes place.
explain why circulating lymphocyte count values alone would not necessarily provide evidence for or against a b cell deficiency.
Circulating lymphocyte count values alone would not necessarily provide evidence for or against a B cell deficiency because of the presence of other types of lymphocytes such as T cells and natural killer cells.
Circulating lymphocyte count values can provide valuable information about the immune system, including the number of B cells in the bloodstream. However, circulating lymphocyte count values alone would not necessarily provide conclusive evidence for or against a B cell deficiency. Here are a few reasons why:
B cells may be present but not circulating: B cells can be found in various tissues and organs throughout the body, not just in the bloodstream. Therefore, a low circulating lymphocyte count may not reflect the overall number of B cells in the body.Other lymphocyte types can compensate: While B cells play an important role in the immune response, other types of lymphocytes, such as T cells, can compensate for a B cell deficiency to some extent. Therefore, normal circulating lymphocyte count values may not necessarily indicate the presence of sufficient B cells.Functional assays may be necessary: Even if circulating lymphocyte count values are low, it may not necessarily indicate a B cell deficiency unless the functional capacity of B cells is also assessed. For example, B cell deficiencies can result from defects in B cell maturation, activation, or antibody production, which cannot be detected by circulating lymphocyte count values alone.In summary, while circulating lymphocyte count values can provide useful information about the immune system, they are just one part of a comprehensive diagnostic evaluation.
Learn more about lymphocytes:
https://brainly.com/question/1995778
#SPJ11
when looking at the antibiotic sensitivity plates, some disks have larger clear areas around them. what do we call that area?
The larger clear areas around antibiotic disks on a sensitivity plate are known as zones of inhibition.
The zone of inhibition is a circular area where the bacteria on the agar medium cannot grow due to the presence of the antibiotic. The diameter of the zone of inhibition correlates with the effectiveness of the antibiotic against the specific bacterial strain tested. The larger the diameter of the zone of inhibition, the more effective the antibiotic is at inhibiting bacterial growth. The size of the zone of inhibition is influenced by various factors including the diffusion rate of the antibiotic, the concentration of the antibiotic, and the susceptibility of the bacteria to the antibiotic.
Learn more about antibiotic disks
https://brainly.com/question/6589445
#SPJ4
magine you genetically engineered a neuron to produce voltage-gated na and k channels that opened at the same time in response to a change in voltage. how would that change the recording shown in the figure? consider the image. a graph of an action potential curve identifies five distinct regions labeled 1 through 5. membrane potential in millivolts is on the y axis and 3 milliseconds of time is represented on the x axis. the membrane potential is at a constant resting potential of -70 millivolts, as indicated by a flat line, until about 1.25 milliseconds when membrane potential increases slightly to the threshold of excitation, approximately -55 millivolts. at region 1, the membrane potential has met the threshold of excitation and the action potential rapidly shoots upward along region 2 to a peak membrane potential of nearly 40 millivolts at around 1.66 milliseconds, marked region 3. after the peak, the graph rapidly falls again, crossing below the resting potential around 2.25 milliseconds at region 4. the curve reaches a low point, region 5, of about -100 millivolts around 2.5 milliseconds before gradually returning to resting potential by 3 milliseconds. imagine you genetically engineered a neuron to produce voltage-gated na and k channels that opened at the same time in response to a change in voltage. how would that change the recording shown in the figure? threshold values would increase. no action potential would be generated. the period of hyperpolarization would be longer. the peak would occur over a longer period of time. the peak voltage would be higher.
If a neuron is genetically engineered to produce voltage-gated Na+ and K+ channels that opened at the same time in response to a change in voltage, it would affect the shape of the action potential curve.
In the original recording shown in the figure, voltage-gated Na+ channels opened first, leading to a rapid depolarization phase, and then voltage-gated K+ channels opened later, leading to repolarization and hyperpolarization. However, if the channels opened simultaneously, the peak of the action potential would be lower, and the shape of the curve would be broader due to the overlapping of Na+ and K+ conductances.
This would result in a longer period of depolarization and slower repolarization. Therefore, the peak would occur over a longer period of time, and the peak voltage would be lower. Overall, the genetically engineered neuron would produce a modified action potential with different characteristics than the original.
Learn more about Neuron here:- brainly.com/question/13061744
#SPJ11
ou should be able to trace carbon atoms through glycolysis and fermentation Imagine an experiment in which cells carrying out glycolysis are given glucose labeled with c (a Map radioactive isotope of carbon) in the carbon atom(s) indicated below. Where will this carbon be found in the intermediate(s) and/or product(s) of glycolysis? You start with glucose labeled with MC at carbon 6. Where will this label be found after the reaction catalyzed by aldolase is completed? O Carbon 3 in G3P. O Carbon 1 in DHAP O Carbon 3 in DHAP O Carbon 2 in G3P O Carbon 1 in G3P O Carbon 2 in DHAP
If cells carrying out glycolysis are given glucose labeled with MC at carbon 6, the label will be found in carbon 3 of G3P after the reaction catalyzed by aldolase is completed.
Where will the carbon be found during glycolysis?
The carbon will be in G3P. This is because aldolase cleaves the 6-carbon molecule into two 3-carbon molecules - glyceraldehyde-3-phosphate (G3P) and dihydroxyacetone phosphate (DHAP). Since carbon 6 of glucose is now part of DHAP, it will not be labeled with MC. However, carbon 3 of G3P will be labeled with MC because it originally came from carbon 6 of glucose.
During fermentation, the fate of the labeled carbon depends on the specific pathway being used. In alcoholic fermentation, for example, the labeled carbon will end up in ethanol, while in lactic acid fermentation, it will end up in lactate.
To know more about glycolysis, visit:
https://brainly.com/question/30828407
#SPJ11
If cells carrying out glycolysis are given glucose labeled with MC at carbon 6, the label will be found in carbon 3 of G3P after the reaction catalyzed by aldolase is completed.
Where will the carbon be found during glycolysis?
The carbon will be in G3P. This is because aldolase cleaves the 6-carbon molecule into two 3-carbon molecules - glyceraldehyde-3-phosphate (G3P) and dihydroxyacetone phosphate (DHAP). Since carbon 6 of glucose is now part of DHAP, it will not be labeled with MC. However, carbon 3 of G3P will be labeled with MC because it originally came from carbon 6 of glucose.
During fermentation, the fate of the labeled carbon depends on the specific pathway being used. In alcoholic fermentation, for example, the labeled carbon will end up in ethanol, while in lactic acid fermentation, it will end up in lactate.
To know more about glycolysis, visit:
https://brainly.com/question/30828407
#SPJ11
Credit Multiple Choice a. probably came into being at the same time as coinage. b. first became popular due to the writings of Aristotle. c. did not exist until the Middle Ages. d. predates coinage by 2,000 years.
D. Credit predates coinage by 2,000 years.
The concept of credit can be traced back to ancient civilizations such as Babylon and Egypt, where farmers and merchants would borrow grain or money from each other and repay it with interest at a later date.
Coinage, on the other hand, was not developed until around 600 BCE in Lydia, which is a few hundred years after the first recorded instances of credit transactions.
To know more about ancient civilizations, refer here:
https://brainly.com/question/17306873#
#SPJ11
What reaction would you expect when performing a positive control in the oxidase assay? What would it mean if a known oxidase-positive bacterium did not cause the expected reaction?
When performing a positive control in the oxidase assay, you would expect to see a blue/purple color change on the oxidase test strip due to the presence of oxidase enzyme. This indicates that the bacterium being tested is able to produce oxidase enzyme and is therefore considered oxidase-positive.
If a known oxidase-positive bacterium did not cause the expected reaction, it could indicate a few different things. It could be due to a technical error in the test, such as not allowing enough time for the reaction to occur or using expired test strips.
Alternatively, it could indicate that the bacterium has lost its ability to produce oxidase enzyme, possibly due to mutations or changes in its environment. Further testing and analysis would be needed to determine the cause of the unexpected result.
To know more about control refer here:
https://brainly.com/question/31358658#
SPJ11#
When performing a positive control in the oxidase assay, you would expect to see a purple color change within 10-30 seconds. A failure to observe the expected reaction in a known oxidase-positive bacterium could indicate a problem with the enzyme or the sample itself.
The positive control usually contains the oxidase enzyme, which is responsible for oxidizing the artificial electron acceptor present in the assay. The purple color change indicates the presence of the enzyme in the sample.
If a known oxidase-positive bacterium did not cause the expected reaction, it could indicate several things. One possibility is that the oxidase enzyme in the bacterium is not functioning properly. This could be due to a mutation in the gene encoding the enzyme or the presence of an inhibitor that is blocking its activity.
Another possibility is that the bacterium was not properly grown or handled prior to testing. For example, if the bacterium was not grown under the appropriate conditions or was exposed to high temperatures or chemicals that could damage the enzyme, it may not be able to perform the oxidation reaction in the assay.
Overall, a failure to observe the expected reaction in a known oxidase-positive bacterium could indicate a problem with the enzyme or the sample itself. Further testing and investigation would be needed to determine the cause of the unexpected result.
For more such questions on Oxidase-positive bacterium.
https://brainly.com/question/31329453#
#SPJ11
The rearrangement of connections at synapses, which occurs throughout life, is termed. A) elasticity. B) intelligence. C) plasticity. D) senility.
The rearrangement of connections at synapses, which occurs throughout life, is termed as (C) plasticity.
The rearrangement of connections at synapses throughout life is termed synaptic plasticity, which allows the brain to adapt to new experiences and learn new information. Neuroplasticity – or brain plasticity is the ability of the brain to rearrange its connections or re-wire itself. Without which any brain, not just the human brain , would be unable to develop from infancy through to adulthood or recover from brain injury.
To know more about Rearrangement of connections at synapses https://brainly.com/question/27363216
#SPJ11
What is the complementary sequence of DNA that would basepair to the following sequence: 5’-ATCCAGGT-3’? Remember that the complementary sequence should be anti-parallel.
A. 5’-TGGACCTA-3’
B. 5’-ACCTGGAT3’
C. 5’-ATCCAGGT-3’
D. 5’-TAGGTCCA-3’
D. 5’-TAGGTCCA-3’ would be the complementary sequence of DNA that would basepair to the given sequence 5’-ATCCAGGT-3’.
In DNA, the base pairs always follow the rule of complementary base pairing, where Adenine (A) pairs with Thymine (T) and Cytosine (C) pairs with Guanine (G). Therefore, the given sequence would pair with its complementary sequence in the following way:
5’-ATCCAGGT-3’ (original sequence)
3’-TAGGTCCA-5’ (complementary sequence, anti-parallel)
Note that the orientation of the two sequences is anti-parallel, meaning one sequence is read in the 5’ to 3’ direction while the other is read in the 3’ to 5’ direction.
Learn more about DNA here-
https://brainly.com/question/264225
#SPJ11
9. What attaches to oxygen and carbon dioxide gas in the blood?
hemoglobin
platelets
blood cells
plasma
the answer is haemohlobin also pls give brainliest answer
Answer:
Hemoglobin
Explanation:
Hemoglobin is made up of four symmetrical subunits and four heme groups. Iron associated with the heme binds oxygen. It is the iron in hemoglobin that gives blood its Red color.
Put the following events of excitation-contraction coupling in the order in which they occur. 1. Excitation 2. Sarcomere shortening 3. Generation of muscle tension 4. Neural control 5. Contraction cycle begins 6. Release of calcium ions O A) 4,1,5,2,6,3 O B) 4,1,6,5,2,3 O C) 1,2,5,6,3,4 O D) 6,1,4,2,5,3 O E) 1,4,6,2,5,3
B) 4,1,6,5,2,3. Excitation-contraction coupling refers to the sequence of events that lead to muscle contraction. The correct order of these events is:
1. Neural control - the nervous system sends a signal to the muscle fiber.
2. Excitation - the signal triggers the release of calcium ions from the sarcoplasmic reticulum.
3. Calcium ion release - the calcium ions bind to troponin, causing a shift in tropomyosin that exposes the myosin binding sites on actin.
4. Contraction cycle begins - the myosin heads bind to the actin filaments and pull them towards the center of the sarcomere, shortening the muscle fiber.
5. Generation of muscle tension - the muscle fiber generates force as the sarcomeres shorten.
6. Relaxation - when the neural signal stops, the calcium ions are pumped back into the sarcoplasmic reticulum, the myosin heads release the actin filaments, and the muscle fiber relaxes.
Therefore, the correct order of events is B) 4,1,6,5,2,3.
Learn more about muscle contraction here:
https://brainly.com/question/15876085
#SPJ11
Self-splicing RNAs work because the a. SnRNAs found outside of the nucleus are activated instantaneously
b. double-stranded nature of RNA structure can create an enzyme-like effect if folded properly
c. conditional mutations in time-sensitive situations maintain phenotypic translation d. replacement of T with U causes a structural change that activates ribozymes
b. Self-splicing RNAs work because the double-stranded nature of RNA structure can create an enzyme-like effect if folded properly.
Self-splicing RNAs are a type of RNA molecule that can catalyze their own splicing reaction without the help of additional proteins. This is possible because of the way the RNA molecule is structured. Self-splicing RNAs have specific sequences and structural motifs that allow them to fold into a specific shape. When the RNA molecule folds in this way, it can create an enzyme-like effect that allows it to catalyze its own splicing reaction. This process is important for the regulation of gene expression and has been found in many different organisms.
To know more about RNA - https://brainly.com/question/28073947
#SPJ11
what is the purpose of technology assessment in the biomimetic design process?
The purpose of technology assessment in the biomimetic design process is to evaluate and compare the technological solutions available for a given design challenge against solutions found in nature.
What is Technology Assesment?Technology assessment in biomimicry involves examining existing technologies and evaluating them based on their ability to mimic the functional properties of natural systems. This assessment can include factors such as material properties, energy consumption, environmental impact, and cost-effectiveness. By comparing the performance of these technologies to the natural systems they aim to emulate, designers can identify gaps in current technology and potential areas for improvement.
Incorporating biomimetic design principles into technology assessment can also help to generate innovative solutions that are more sustainable, efficient, and effective. By looking to nature for inspiration, designers can create designs
Learn more about biomimetic design process from the given link
https://brainly.com/question/15290068
#SPJ1
the human β-globin polypeptide contains 146 amino acids. part a how many mrna nucleotides are required to encode this polypeptide?
438 mRNA nucleotides are required to encode the human β-globin polypeptide. The number of nucleotides in the mRNA by three to get the number of codons needed to code for the polypeptide.
The genetic code is a set of rules that determine how the four-letter nucleotide code of DNA is translated into the 20-letter amino acid code of proteins. In the case of the human β-globin polypeptide, which contains 146 amino acids, the number of mRNA nucleotides required to encode it can be calculated using the following steps:
Determine the number of nucleotides required to encode a single amino acid: Since the genetic code is a triplet code, meaning that three nucleotides (a codon) specify each amino acid, we can divide the number of nucleotides in the mRNA by three to get the number of codons needed to code for the polypeptide.Multiply the number of amino acids by the number of nucleotides per codon: The human β-globin polypeptide contains 146 amino acids, so we can multiply this by 3 to get the total number of nucleotides needed to code for the polypeptide. Therefore, the total number of mRNA nucleotides required to encode the human β-globin polypeptide is 146 amino acids x 3 nucleotides per codon = 438 nucleotides.Learn more about amino acids: https://brainly.com/question/14351754
#SPJ11
The point in a muscle twitch when the troponin is bound to calcium is called the
a. isotonic period
b. stimulus phase
c. relaxation phase
d. contraction phase
e. latent period
The point in a muscle twitch when the troponin is bound to calcium is called the contraction phase (d). During a muscle twitch, a single, brief contraction and relaxation of muscle fibers occurs in response to a stimulus. The process involves a series of events that lead to the shortening of muscle fibers and the generation of force.
The contraction phase begins when calcium ions, released from the sarcoplasmic reticulum, bind to troponin. This binding causes a conformational change in the troponin-tropomyosin complex, which allows the myosin heads to attach to the actin filaments. The subsequent pulling of actin filaments by myosin heads generates muscle tension and results in contraction.
Other phases in a muscle twitch include the latent period (e), which is the brief time between the stimulus and the onset of contraction, and the relaxation phase (c), when the muscle fibers return to their resting state after the contraction has occurred. The isotonic period (a) and stimulus phase (b) are not recognized terms within the context of muscle contraction.
Learn more about contraction here:
https://brainly.com/question/4504596
#SPJ11
Globular proteins are typically constructed from several layers of secondary structure, with a hydrophobic core and a hydrophilic surface. Is this true for a fibrous protein such as alpha keratin?
Yes, the statement about globular proteins is true, but the structural organization of fibrous proteins like alpha-keratin is different. Alpha-keratin is a fibrous protein primarily found in hair, nails, and skin, and is characterized by a coiled-coil structure formed by two intertwined alpha-helices.
This structure results in a highly stable and strong protein. In contrast to globular proteins, which possess a hydrophobic core and hydrophilic surface, fibrous proteins like alpha-keratin have repeating patterns in their primary sequences, creating an elongated, rod-like structure. The amino acid side chains in alpha-keratin mostly consist of hydrophobic residues, contributing to the overall stability and water-insolubility of the protein. Additionally, alpha-keratin is stabilized by disulfide bridges formed by cysteine residues, which further enhances its mechanical strength.
In summary, while globular proteins have a hydrophobic core and hydrophilic surface, fibrous proteins such as alpha-keratin exhibit a different structural organization featuring a coiled-coil structure, elongated shape, and predominantly hydrophobic amino acid composition.
To learn more about Globular Proteins :
https://brainly.com/question/13637212
#SPJ11
men need to inherit only one copy of the recessive allele for the condition to be fully expressed. true or false
The statement "men need to inherit only one copy of the recessive allele for the condition to be fully expressed" is partially true because It depends on the specific condition and whether it is sex-linked or autosomal.
In autosomal recessive conditions, both males and females need to inherit two copies of the recessive allele in order for the condition to be fully expressed. This means that if a male inherits only one copy of the recessive allele, he will be a carrier of the condition but will not show any symptoms.
However, if he has children with a carrier female, there is a 25% chance that their offspring will inherit both copies of the recessive allele and thus show symptoms of the condition.
In contrast, some conditions are sex-linked and are carried on the X chromosome. Males have only one X chromosome, so if they inherit a recessive allele for a sex-linked condition from their mother, they will show symptoms of the condition.
This is because they do not have another X chromosome to offset the effects of the recessive allele. Females, on the other hand, have two X chromosomes and would need to inherit two copies of the recessive allele to show symptoms of a sex-linked condition.
In summary, the statement is true for some sex-linked conditions but false for autosomal recessive conditions. It is important to understand the inheritance pattern of specific genetic conditions to accurately interpret their expression in males and females.
For more such questions on autosomal
https://brainly.com/question/29793813
#SPJ11
one of the functions of synovial fluid is to act as a shock absorber that distributes force evenly across the joint surface.
a. true
b. false
a. true. One of the functions of synovial fluid is to act as a shock absorber that distributes force evenly across the joint surface. Synovial fluid is a viscous substance found within synovial joints, and its primary function is to reduce friction between the joint surfaces during movement.
Additionally, it helps distribute force evenly, providing a cushioning effect and protecting the joint surfaces from damage. Synovial fluid is a clear, viscous liquid that is found in the cavities of synovial joints. It helps to reduce friction between the articular cartilage of the joint surfaces and acts as a lubricant during joint movement. In addition to lubrication, synovial fluid also helps to cushion and distribute forces evenly across the joint surface during movement, thereby reducing the risk of joint damage or injury.
Learn more about Synovial fluid here:
https://brainly.com/question/1927640
#SPJ11
results when the spinal motor neurons are destroyed by disease. a.spina bifida b.spastic paralysis c.flaccid paralysis d.neural tube defect
The condition that results when the spinal motor neurons are destroyed by disease is c. flaccid paralysis.
Flaccid paralysis occurs when there is damage to the spinal motor neurons, which are responsible for sending signals from the brain to the muscles. This damage can be caused by various diseases, such as polio or amyotrophic lateral sclerosis (ALS). When these neurons are damaged, the muscles can no longer receive signals from the brain, leading to weakness and paralysis.
In contrast, spina bifida and neural tube defects are developmental disorders affecting the spinal cord and neural tube, respectively, while spastic paralysis results from damage to upper motor neurons and is characterized by involuntary muscle contractions.
Learn more about neurons here:
https://brainly.com/question/31215300
#SPJ11