Perform the following conversion: 6.1 × 103 K (the surface temperature of the Sun) to °F and °C. Pay attention to the number of significant figures in this problem. (Enter your answers in scientific notation.)

Answer:

a. CH_3OH and Na^+

Explanation:

Ion-dipole interaction is the forces of attraction existing between a polar compound and an ion. This particular type of ion-dipole attraction occurs between an electrostatic attraction of an ion and a dipole molecule.

From the given example, CH3OH is a polar compound, and Na^+ is an ion. Therefore, that is the only pair that exhibit the characteristics of an ion-dipole interaction.

Answer:

It will take the police car 3.5 hours to travel a distance of 175 miles traveling at a rate of 50 miles/hour.

Explanation:

Answer:

H2O - Hydrogen bonding, dipole dipole, and dispersion

CH4 - Dispersion only

CO - Dipole dipole and dispersion only

CH3Cl - Dipole dipole and dispersion only

Explanation:

Hydrogen bonding can only exist when hydrogen is bonded to a small highly electronegative atom such as oxygen hence hydrogen bonds, dipole interactions and dispersion by are present in water.

CH4 is a nonpolar molecule hence only dispersion forces are present.

CH3Cl and CO both possess dipoles in the molecule hence both dipole interactions and dispersion forces exist in the molecule.

Answer:

Pb(NO₂)₂(aq) + 2 LiCl(aq) ⇒ PbCl₂(s) + 2 LiNO₂(aq)

Explanation:

Let's consider the reaction between aqueous lead (II) nitrite and aqueous lithium chloride to form solid lead (II) chloride and aqueous lithium nitrite.

Pb(NO₂)₂(aq) + LiCl(aq) ⇒ PbCl₂(s) + LiNO₂(aq)

This is a double displacement reaction. We will start balancing Cl by multiplying LiCl by 2.

Pb(NO₂)₂(aq) + 2 LiCl(aq) ⇒ PbCl₂(s) + LiNO₂(aq)

Now, we have to balance Li by multiplying LiNO₂ by 2.

Pb(NO₂)₂(aq) + 2 LiCl(aq) ⇒ PbCl₂(s) + 2 LiNO₂(aq)

The equation is now balanced.

The balanced chemical reaction equation required is; Pb(NO2)2(aq) + 2 LiCl(aq) -----> PbCl2(s) + 2LiNO2(aq)

In order to write a balanced chemical reaction equation, we must write down the symbols of the compounds involved as follows;

lead (II) nitrite  - Pb(NO2)2

lithium chloride - LiCl

lead (II) chloride - PbCl2

lithium nitrite - LiNO2

Recall that the principle of writing a balanced chemical reaction equation is that the number of atoms of each element on both sides of the reaction equation must be the same. The required balanced chemical reaction equation is;

Pb(NO2)2(aq) + 2 LiCl(aq) -----> PbCl2(s) + 2LiNO2(aq)

Learn more: https://brainly.com/question/2320755

Answer:

(a) N₂O - Dinitrogen monoxide or Dinitrogen (I) oxide

(b) NO - Nitrogen monoxide or Nitrogen (II) oxide

(c) NO₂ - Nitrogen dioxide or Nitrogen (IV) oxide

(d) N₂O₅ - Dinitrogen pentoxide

(e) N₂O₄ - Dinitrogen tetraoxide.

Explanation:

To name each of the compounds,

(a) N2O; It is properly written as N₂O. N₂O is a colorless, sweet tasting gas also known as "laughing gas".

N₂O - Dinitrogen monoxide OR Dinitrogen (I) oxide.

(b) NO; NO is a colorless gas.

NO - Nitrogen monoxide OR Nitrogen (II) oxide.

(c) NO2; It is properly written as NO₂

NO₂ is a reddish-brown gas.

NO₂ - Nitrogen dioxide or Nitrogen (IV) oxide.

(d) N2O5; It is properly written as N₂O₅

N₂O₅ is a white solid.

N₂O₅ - Dinitrogen pentoxide.

(e) N2O4; It is properly written as N₂O₄;

N₂O₄ is a red-brown liquid with an unpleasant smell.

N₂O₄ - Dinitrogen tetraoxide.

Explanation:

A dishonest scientst has a lot of integrity.

Confirmation bias is the most common type of bias in science.

Answer: ethical scientists make unbiased conclusions, science is based on opinion and subjective evidence, and bias can be ruled out if similar results are obtained from repeated experiments.

Explanation: If you’re a dishonest scientist you don’t have integrity and confirmation bias isn’t the most common type of bias in science

Answer:

2.7 × 10⁻⁷ M

Explanation:

Step 1: Write the reaction for the solution of PbCO₃

PbCO₃(s) ⇄ Pb²⁺(aq) + CO₃²⁻(aq)

Step 2: Make an ICE chart

To relate the solubility of PbCO₃ (S) with its solubility product constant (Ksp) we will make an ICE chart.

        PbCO₃(s) ⇄ Pb²⁺(aq) + CO₃²⁻(aq)

I                              0               0

C                            +S             +S

E                              S               S

The solubility product constant is:

Ksp = 7.4 × 10⁻¹⁴ = [Pb²⁺] × [CO₃²⁻] = S²

S = √7.4 × 10⁻¹⁴ = 2.7 × 10⁻⁷ M

Answer:

1. 0.209quart

2. 743.6pounds

3. 22500kg/m^3

4. 2.07pounds

5. 4.50cm

Explanation:

Note that, these questions are related to density which can be calculated using the formula:

Density (p) = Mass (m) / Volume (v)

However, the units are different for each questions, hence, must be made the same

1. 1 ounce = 28.35 grams

95 ounces will be 95 × 28.35 = 2693.2g

Volume = mass/density

Volume of Mercury= 2693.2/13.6

Volume= 198ml

1 ml = 0.00106quart

198ml = 198 × 0.00106 = 0.209quart

2. 1 gallon = 3785.4ml

55 gallons = 55× 3785.4 = 208197ml

Mass = density × volume

Mass = 1.62 × 208197

Mass = 337,279.14g

1 pounds = 453.592 g

337279.14 g = 337279.14/453.592

Mass = 743.6pounds

3. 1g/cm^3 = 1000kg/m^3

Hence, a density of 22.5g/cm^3 will be 22.5 × 1000 = 22500kg/m^3

4. Volume of a cube of side 5cm each will be 5×5×5 = 125cm^3

Density = 7.50g/cm^3

Mass = Density×volume

Mass in grams = 7.50 × 125

Mass = 937.5grams

1 pound = 453.592 g

Therefore, 937.5g will be 937.5/453.592 = 2.07pounds.

5. Volume = Mass / density

Volume = 500/10.5

Volume = 47.62cm^3

Since a ball is spherical in shape, volume of a sphere (V) = 4/3πr^3

To find radius, we say;

47.62 = 1.33 × 3.142 × r^3

47.62 = 4.179 × r^3

r^3 = 47.62/4.179

r^3 = 11.395

r = 3√11.395

r = 2.25cm

To get diameter (d), we multiply the radius (r) by 2,

d = 2 × 2.25

d= 4.50cm

Answer:

[tex]d=1x10^{-9}dm[/tex]

Explanation:

Hello,

In this case, considering that 1 m equals 10 dm, the required diameter of the atom in decimetres is:

[tex]d=1x10^{-10}m*\frac{10dm}{1m} \\\\d=1x10^{-9}dm[/tex]

Best regards.

Answer:

680

Explanation:

Move the decimal 2 to the right.

When a number is written using only the digits of the number, that is considered standard notation. 6.8 × 10²  is converted into standard notation by shifting two decimal to the right side, then it became 680.

A form of writing a certain number, an equation, or an expression in a way that adheres to set norms is known as a standard notation. For instance, 4,500,000,000 years is how 4.5 billion years is written.

When a number is written using only the digits of the number, that is considered standard notation. Since words are not used in conventional number notation, this is the way that numbers are typically written.

The stages to writing a number in its standard form are as follows: Write the first digit of the supplied number in step one. Step 2: After the first number, add the decimal point. Step 3: Next, count how many digits there are in the supplied number after the first one and express that number as a power of 10.

Thus, the standard notation is 680.

To learn more about standard notation, follow the link;

https://brainly.com/question/10253124

#SPJ2

Answer:

This replacements will make the compound less basic and more acidic

Explanation:

Replacing amino groups (-NH₂) which act as bases [because of there ability to accept hydrogen ion (H⁺)] with carboxyl group (-COOH) which acts as acid [because of it's ability to donate hydrogen ion (H⁺)] in a compound changes the property of the compound to be less basic and more acidic.

Answer:

Assume that the sack was initially close to the sea level. Its weight will increase even though its mass stays the same.

Explanation:

The weight of an object typically refers to the size of the planet's gravitational attraction (a force) on this object. That's not the same as the mass of the object. The weight of an object at a position depends on the size of the gravitational field there; on the other hand, the mass of the object is supposed to be same regardless of the location- as long as the object stays intact.

Let [tex]g[/tex] denote the strength of the gravitational field at a certain point. If the mass of an object is [tex]m[/tex], its weight at that point will be [tex]m \cdot g[/tex].

Indeed, [tex]g \approx 9.81\; \rm N \cdot kg^{-1}[/tex] on many places of the earth. However, this value is accurate only near the sea level. The equation for universal gravitation is a more general way for finding the strength of the gravitational field at an arbitrary height. Let [tex]G[/tex] denote the constant of universal gravitation, and let [tex]M[/tex] denote the mass of the earth. At a distance [tex]r[/tex] from the center of the earth (where

[tex]\displaystyle g \approx \frac{G \cdot M}{r^2}[/tex].

The elevation of many places in Bhutan are significantly higher than that of many places in India. Therefore, a sack of potato in Bhutan will likely be further away from the center of the earth (larger [tex]r[/tex]) compared to a sack of potato in India.

Note, that in the approximation, the value of [tex]g[/tex] is (approximately, because the earth isn't perfectly spherical) inversely proportional to the distance from the center of the planet. The gravitational field strength

On the other hand, the weight of an object of fixed mass is proportional to the gravitational field strength. Therefore, the same bag of potatoes will have a smaller weight at most places in Bhutan compared to most places in India.

Answer:

What are the properties of the aluminum in the can? Check all that apply.

*It conducts electricity well.

*It is solid.

It is brittle.

*It does not react easily with water or air.

It is less dense than water.

Explanation:

a b d

The properties of aluminium (Al) includes electrical conductivity, solid and it does not react easily with water. Therefore, option A, B and D are correct.

Aluminium is a common metal we use day to day. It is an electropositive element and due to its metallic nature, Al shows electrical and thermal conductivity. Unlike other metals Al can withstand brittleness and it is ductile in nature.

Aluminium easily reacts with oxygen and forms an oxide layer on its surface so that, it can resist attack by other chemical such as acid or bases as well as oil and water. Hence water does not easily react with aluminium.

Therefore, we can say that aluminium is a solid which conduct electricity and not easily reacts with water.

To learn more about Al, refer the link below:https://brainly.com/question/23755698

#SPJ5

Answer: m=F/a

Explanation:

Answer:

d

Explanation:

Answer:

P=110 m

Explanation:

Length of the field is 38 m

Breadth of the field is 17 m

We need to find the perimeter of this field. It is in the form of a rectangle. The perimeter of a rectangle is given by :

P=2(l+b)

P=2(38+17)

P=110 m

So, the perimeter of this field is 110 m.

Answer:

0.1

tenth

hundredth (0.01)

1.05 (can be anywhere from 1.00 to 1.10)

11.42 (can be anywhere from 11.40 to 11.50)

yes, it falls within reasonable doubt

Given :

a. [tex]BH_x[/tex] b. [tex]CH_x[/tex] c. [tex]NH_x[/tex] d. [tex]CH_2Cl_x[/tex] .

To Find :

Find the most likely vale of x for each one .

Solution :

a . [tex]BH_x[/tex]

Because boron have valency of 3 .

So , x = 3 .

b . [tex]CH_x[/tex]

Valency of carbon is 4 .

x = 4 .

c . [tex]NH_x[/tex]

Valency of nitrogen is 3 .

Therefore , x = 3 .

d . [tex]CH_2Cl_x[/tex]

Now ,we know valency of carbon is 4 and hydrogen is 1 .

Also , two hydrogen are already there .

So , only 2 electrons left to share .

Since , chlorine have valency of 1 .

Therefore , only 2 electrons of chlorine can connect .

x = 2 .

Hence , this is the required solution .

Answer:

pH = -log₁₀ [H⁺]

Explanation:

pH is a value in chemistry used in to measure solution trying to determine each quality, purity, risks for health of some products, etc.

As you write in the question, [H⁺] = 10^(-pH)

Using logarithm law (log (m^(p) = p log(m):

log₁₀ [H⁺] = -pH

And

Answer:

7 (a neutral solution)

Answer: 10-7= 0.0000001 moles per liter

5.6 (unpolluted rainwater)

Answer: 10-5.6 = 0.0000025 moles per liter

3.7 (first acid rain sample in North America)

Answer: 10-3.7 = 0.00020 moles per liter

The concentration of H+ in the Hubbard Brook sample is 0.00020/0.0000025, which is 80 times higher than the H+ concentration in unpolluted rainwater.

Explanation:

plato

Answer:

b) At equilibrium, equal amounts of products and reactants are present.

Explanation:

At equilibrium , the ratio of product of concentration of products  and product of concentration of  reactants is constant .

                                             A + B ⇄ C + D

                                 [C] [ D]  / [ A ] [ B ] = Constant

So, the statement ( b )  is false .

All other statements are true .

Answer:

o-bromotoluene, m-bromotoluene  and p-bromotoluene.

Explanation:

Hello,

In this case, on the attached picture you will find the reaction which yields o-bromotoluene as the first product, m-bromotoluene as the second product and p-bromotoluene as the last one since the substitution could be done at the second (ortho), third (meta) or fourth (para) carbons on the toluene.

Regards.

Answer:

1km/h =27.778cm/s

therefore

if 1km/h=27.778cm/s

2.350km/h=?

cross multiple

2.350km/h X27.778cm/s /1km/h

=65.2783cm/s

The ans should be C. ( if i'm not wrong )

This is because the solubility of oxygen increases when temperature in the water is cooler. Cold water can hold more dissolved oxygen than warm water, thus having a higher concentration of oxygen.

Answer:

C. is greater in cool liquid water than in warm liquid water.

Explanation:

Explanation:

H2 (9) + 2 NOg) N20() + H20G)

H2 (M) NO (M) Rate (M*s)

Trial 1 0.30 0.35 2.835 x 10-3

Trial 2 0.60 0.35 1.134 x 10-2

Trial 3 0.60 0.70 2.268 x 10-2

a. What is the order with respect to H2?

Comparing trials 1 and 2,the concentration of H is doubled and that leads to an increase in the rate of the reaction by a factor of 4. This means the order with respect to H is 2.

b. What is the order with respect to NO?

Comparing trials 2 and 3, the concentration of NO is doubled and that leads to an increase in the rate of the reaction by a factor of 2. This means the order with respect to NO is 1.

c. What is the rate equation for this reaction?

rate = k [H]²[NO]

d. Calculate the rate constant for the reaction.

Taking trial 1;

rate = k [H]²[NO]

2.835 x 10-3  = k (0.30)² (0.35)

k = 90 x 10-3 = 0.09  L2 mol-2 s-1

Answer:

A. 10^9

B. 10^-1

C. 10^-1

Answer:

H-BI,H-Se,H-S,H-I,H-Br

Explanation:

One thing that must be kept in mind is that atomic size increases down the group and decreases across the period. The bond lengths of species are influenced by the relative sizes of atoms or ions present in the bond.

The bonds in the answer have been arranged on basis of their decreasing atomic size because the greater the atomic size of the atoms, the greater the bond length and vice versa.

Answer:

I would say it's A just because it's make no sense for the other answers.

Aluminum atom is most likely to form a metallic bond.

METALLIC BONDS:

Learn more: https://brainly.com/question/20511339?referrer=searchResults

Answer:

diamond

sugar

rubber

salt (NaCl)

wood

ice

flour

Answer:

diamond

sugar

salt

ice

Explanation:

Answer:

94 are naturally made on earth

Explanation:

Answer:

94 or 98, i think.

Explanation: