Energy is the fundamental need for lives. Fossil fuel is the energy source that is most needed in society. It is now replaced with solar energy as fossil fuels are nonrenewable resources.
What is the non-renewable and renewable source?Nonrenewable resources are energy sources that are finite in amount and get depleted after some time as it takes millions of years to produce these resources. Fossil fuels though are needed but are nonrenewable and cause pollution.
Solar energy is a renewable source that is present in abundant and infinite quantity and does not get depleted fast after they are used excessively. They are also environmentally friendly and do not produces much pollution.
Therefore, fossil fuel and solar energy are the most demanded sources.
Learn more about fossil fuels here:
https://brainly.com/question/27775949
#SPJ1
Solve and balance H2+Cl2
H2 + Cl2 → 2 HCl - Equation Balanced
Explanation:
Two elements H2and Cl2 combine to from a single compound, HCl. Hence, it is a combination reaction As two elements combine to from a compound, it is an element - element combination.
I hope it'll help you...
An unknown substance weighing 50.0g was heated from 36.0 to 69.0. In this process, the substance absorbed 5890.0J of energy. What is the specific heat of the substance
What is the formula for calculating the change in thermal energy?
Answer: :Change in thermal energy = mass x specific heat capacity x change in temperature.
Explanation: what it basically means is mass x heat x the change in temperature.
Chemical labels must contain a product identifier, signal word and a pictogram to represent the hazards. what other information is required on a chemical label?
Answer:
The HCS now requires the following elements on labels of hazardous chemicals: Name, Address and Telephone Number of the chemical manufacturer, importer or other responsible party
Explanation:
I tried, I think this is the correct answer.
Radiocarbon dating can be used to determine the age of a fossil because the amount of carbon-14 found in the fossil...
a. increases steadily over time.
b. decreases steadily over time.
c. is unaffected by time.
d. remains the same for the first 10 years, and then rapidly decreases.
Answer:
B
Explanation:
Carbon-14 will steadily decrease in a dead organism. Fossils are no different. Sense it's dead already, it will still be getting rid of the last bit of carbon-14 it has in a steadily way.
What was in Flint's water that caused 12 people to die?(1 point)
lead
total triahalomethanes
Legionella pneumophila
Escherichia coli
The presence of lead in Flint's water is what caused the death of 12 people.
Option A.
What was in Flint's water?The Flint water crisis started in 2014 when the city of Flint, Michigan, switched its water source from Lake Huron to the Flint River as a cost-cutting measure.
The water from the Flint River was more corrosive and caused lead to leach from the pipes, contaminating the drinking water. This led to high levels of lead in the drinking water, which is a potent neurotoxin that can cause a variety of health problems, particularly in children.
The contamination also led to an outbreak of Legionnaires' disease, a severe form of pneumonia, which was linked to at least 12 deaths in the area.
Learn more about flint's water here: https://brainly.com/question/13688064
#SPJ1
Imagine that the human population continues to increase, but we don't monitor or implement strategies to minimize our impact on the blue crab population.
Construct an argument supported by evidence for how increases in human populations impact the consumption of natural resources. In your answer, be
sure to include:
• the relationship between human populations and the consumption of resources
• a prediction of how the blue crab population would change with an increasing human population
evidence from the resources explored during the lesson
scientific reasoning
Answer:
The Explanation
Explanation:
:i imagine less blue crabs ngl
Question 1 (1 point) Which of the following summarizes cellular respiration?
Oxygen reacts with glucose to produce carbon dioxide and water, and release energy.
Light energy is changed into chemical energy.
Chemical energy is changed into light energy.
Light energy is used to join water and carbon dioxide to make oxygen and glucose
Answer:
oxygen reacts with glucose to produce carbon dixiode into water and release energy. It is 1
Explanation:
It is A
Explanation:
A balloon containing 0.15mol of hydrogen gas (H2) has a volume of 0.75L. If the balloon is further inflated with additional hydrogen gas to a 3.75L volume, what is the total mass of hydrogen gas in grams in the balloon
The total mass of hydrogen gas in grams in the balloon given the data is 1.5 g
How to determine the new mole of hydrogenInitial mole (n₁) = 0.15 moleInitial volume (V₁) = 0.75 LNew volume (V₂) = 3.75 LNew mole (n₂) = ?The new mole of the gas can be obtained by using the ideal gas equation as follow:
PV = nRT
V / n = RT / P
RT / P = constant
V₁ / n₁ = V₂ / n₂
0.75 / 0.15 = 3.75 / n₂
5 = 3.75 / n₂
Cross multiply
5 × n₂ = 3.75
Divide both sides by 5
n₂ = 3.75 / 5
n₂ = 0.75 mole
How to determine the mass of hydrogenNumber of mole = 0.75 moleMolar mass of H₂ = 2 g/moleMass of H₂ = ?Mass = mole × molar mass
Mass of H₂ = 0.75 × 2
Mass of H₂ = 1.5 g
Learn more about ideal gas equation:
https://brainly.com/question/4147359
#SPJ1
Define density please thanks!!
Which of the following happens when a reaction reaches dynamic equilibrium in a closed system?
A) The concentrations of the reactants and products increase.
B) The concentrations of the reactants and products remain constant
C) The rate of the forward reaction is faster than the rate of the reverse reaction.
D) The rate of the forward reaction is slower than the rate of the reverse reaction
Answer: B
Explanation:
At equilibrium, the rate of the forward reaction is equal to the rate of the reverse reaction, and thus the concentrations of the reactants and products must be constant.
Why do medical implants and prosthetics should be carefully designed when placed inside or on the surface of the body?
Answer:
because it needs to fit exactly into how your body is like
Explanation:
uranium-235 fission given: energy released = about 200 MeV per individual reaction (mass = 235 amu) find the balanced nuclear reaction
The fission of uranium-235 leads to the equation; 235/92U + 1 neutron → 92/36Kr + 141/56Ba + 3 neutrons + energy.
What is a fission reaction?The term fission reaction refers to the reaction in which a nucleus is bombarded with a particle which causes the nucleus to break down. This leads to the release of energy.
The fission of uranium-235 leads to the equation; 235/92U + 1 neutron → 92/36Kr + 141/56Ba + 3 neutrons + energy.
Learn more about fision:https://brainly.com/question/913303
#SPJ1
In an ionic bond, metals lose electrons to become _____.
Answer:
In an ionic bond, metals lose electrons to become Cations.
Explanation:
Metal atoms lose electrons to form positive ions (cations).
6.0 L of gas in a piston at a pressure of 1.0 atm are compressed until the volume is 3.5 L. What is the new pressure inside the piston?
From the calculations and by the use of Boyles law, the new pressure of the gas is 1.7 atm
What are gas laws?The term gas law is used to demonstrate the relationship between the volume, pressure, number of moles and temperature of a gas.
Using the Boyles law;
P1 = 1 atm
P2 = ?
V1 = 6 L
V2 = 3.5 L
P1V1= P2V2
P2= P1V1/V2
P2= 1 atm * 6 L/3.5 L
= 1.7 atm
Learn more about Boyles law:https://brainly.com/question/1437490
#SPJ1
A nuclear fission reaction has mass difference between the products and the reactants of 0.0593 Calculate the amount of energy released by the reaction
a. 1.09 x 10(-45)J
b. 3.28 x 10(-37)J
c. 9.85 x 10(-29)J
d. 8.86 x 10(-12)J
The amount of energy released by the reaction b. 3.28 x 10(-37)J
What is a nuclear fission reaction?A nuclear fission reaction in which the nucleus is divided into numerous small nuclei.
The mass difference is 0.0593
To calculate the energy
[tex]E = \Delta mc^2\\\\c = 3 \times 10^8\;m/s\\\\m = 3.86 \times 10^-^3 \;kg\\[/tex]
Putting the values in the equation
[tex]E = (0.0593) (3 \times 10^8\;m/s)^2 = 5.337 \times 10^1^5[/tex]
Thus, the correct option is b. 3.28 x 10(-37)J
Learn more about nuclear fission reaction
https://brainly.com/question/913303
#SPJ1
how many moles of O2 will react with 0.6482 moles of H2O?
2C3H6O + 5O2 → 6CO + 6H2O
Answer:
n=0.648 moles
the ratio 5:6
x:0.648
x=0.54 moles
How many grams is 3.2 moles of water
Answer:
similarly 1 mole of water is equivalent to molecular mass of water x 3 that is 18x3=54 gram
Explanation:
what are three different ways land is used as a resource
Which of the following is not a type of energy
A. Heat from an oven.
B. Electricity in a power cord.
C. Light from a lightbulb.
D. Smoke from a fire.
Answer:
smoke from a fire Is not an example of energy
A mole is known by what other name?
Answer: avogadros number/constant
Explanation:
witchh organsim primary cosumers
Answer:
Primary consumers are herbivores, feeding on plants
Explanation:
:)
Primary consumers are at the second trophic level of the food pyramid. This means that they eat producers. An example of a primary consumer would be a grasshopper eating grass. Primary consumers get eaten by secondary consumers, such as a rabbit who eats grass, and the rabbit gets eaten by a fox.
Atoms of arsenic (As) are often added to silicon (Si) in a process called doping to change the conductivity of the silicon. How does the addition of arsenic change the conductivity of silicon?
An atom of arsenic has one fewer valence electron and more electron shells than an atom of silicon, so the conductivity decreases because the arsenic atom gains an electron.
An atom of arsenic has one more valence electron and more electron shells than an atom of silicon, so the conductivity decreases because the arsenic atom loses the electron.
An atom of arsenic has one fewer valence electron and fewer electron shells than an atom of silicon, so the conductivity increases because the arsenic atom gains an electron.
An atom of arsenic has one more valence electron and more electron shells than an atom of silicon, so the conductivity increases because the arsenic atom loses the electron.
Answer:
B.) An atom of arsenic has one more valence electron and more electron shells than an atom of silicon, so the conductivity decreases because the arsenic atom loses the electron.
Explanation:
Silicon is located in the 3rd row and 14th column in the periodic table. Arsenic is located in the 4th row and 15th column in the periodic table. This means that arsenic has one more valence electron than silicon. Since arsenic is located one row down from silicon, its valence electrons occupy higher energy orbitals.
Silicon maintains a crystal-like lattice structure. Each silicon atom is covalently connected to assume this shape. When silicon gains one extra electron from arsenic, it experiences n-type doping. This new electron is not tightly bound in the lattice structure. This allows it to move more freely and conduct more electricity. This can also be explained using band gaps. Silicon, which previously had an empty conduction band, now has one electron in this band. This lowers the band gap between the conduction and valence bands and increases conductivity.
Answer:
its d
Explanation:
At 0.500 atm and 15.0°C a sample of gas occupies 120. L. What volume does it occupy at
0.250 atm and 10.0°C?
O236 L
O 60 L
O 111 L
O 480 L
The combined gas law is used to determine the relationship between the pressure, temperature, and volume of the gas. The volume of the gas at 0.250 atm is 236 L. Thus, option A is correct.
What is combined gas law?The combined gas law uses the ideal gas equation to estimate the temperature, volume, or pressure of the given gas.
Given,
Initial pressure = 0.500 atm
Initial temperature = 288.15 K
Initial volume = 120 L
Final pressure = 0.250 atm
Final temperature = 283.15 K
The final volume is calculated as:
V₂ = (P₁V₁ T₂) ÷ (P₂ T₁)
= 0.500 × 120 × 283.15 ÷ 0.250 × 288.15
= 16989 ÷ 72.03
= 235.86 L
Therefore, 236 L is the final volume at 0.250 atm.
Learn more about combined gas law here:
https://brainly.com/question/14648508
#SPJ1
Which equation represents a combustion reaction?
1) 4fe + 3o2 = 2fe2o3
2) 2h2o = 2h2+o2
3) 2agno3 + h2s = ag2s + 2nho3
4) 2al + n2= 2aln
Answer:
2
Explanation:
do take note that combustion reactions releases oxygen.
Calculate the pressure (in kpa) of 1.5 mole of helium gas at 354 k when it occupies a volume of 16.5l.
Answer:
267.57 kPa
Explanation:
Ideal gas law:
PV = n RT R = 8.314462 L-kPa/K-mol
P (16.5) = 1.5 (8.314462)(354) P = 267.57 kPa
Why do fireworks produce heat when they explode?
How many moles of oxygen are required to make 4 moles of water?
Answer:
2 moles of oxygen
Explanation:
Basic Equation (given) :
2H₂ (g) + O₂ ⇒ 2H₂O (g)
From this, we understand for every 2 moles of water, 1 mole of oxygen is neededTaking the number of moles of oxygen and water in proportion :
1 : 21 × 2 : 2 × 22 : 4Therefore, 2 moles of oxygen are required to make 4 moles of water.
[tex] \textsf{\qquad\qquad\huge\underline{{\sf Answer}}} [/tex]
As per the given equation, we can infer that :
For getting 2 moles mole of water, 1 mole of oxygen gas was required. so to get 4 moles of water we need :
We just have to multiply the whole reaction by 2 on both sides, in order to get 4 moles of H2O on product side.
[tex] \qquad \qquad \rm4 \: H_2 + 2 \: O_2 \rightarrow4 \: H_2O[/tex]
therefore, we need
[tex]\qquad \sf \dashrightarrow \: 2 \times 1 = 2 \: moles \: \: oxygen \: gas[/tex]
When placed in a cloud chamber, a radioactive substance does which of the following?
a. Leaves a trail of condensed water vapor.
b. Produces an electric current.
c. lonizes chemicals on the film present in the chamber.
d. Causes a liquid to reach its boiling point.
Which element is number 14 on the periodic table?.
Answer:
Silicon
Explanation:
When viewing the periodic table of elements and locating atomic number 14, you will find that the element present is Silicon (Si), of which is within the metalloid elemental group.