The tangible benefit of information systems is that they provide improved resource control, improved asset usage, and more information.
What are information systems?
Information systems are a set of interrelated components that gather, store, and process data to provide relevant information for decision-making activities in an organization.
What is a tangible benefit of information systems?
Improved resource control is a tangible benefit of information systems. This benefit comes from the ability of information systems to provide real-time information to managers who use it to make more informed decisions. This enables managers to more efficiently allocate resources to achieve their objectives.
What are other tangible benefits of information systems?
Improved asset usage is another tangible benefit of information systems. With information systems, organizations can monitor asset utilization and determine when and where they need to deploy their assets to maximize their returns. This allows organizations to optimize their asset usage and reduce waste and downtime.
More information is also a tangible benefit of information systems. With information systems, organizations can collect and analyze data from various sources, such as customer feedback, market research, and sales reports, to gain insights into their operations. This information can be used to make more informed decisions and drive growth and innovation in the organization.
Learn more about Information systems here:
https://brainly.com/question/13081794
#SPJ11
A distance of 118.060 m was measured along a 2-percent slope. Compute the horizontal distance.
The horizontal distance along the 2-percent slope is approximately 115.61 meters.
In order to compute the horizontal distance, we need to take into account the measured distance along the slope and the percent slope. The given problem states that a distance of 118.060 meters was measured along a 2-percent slope.
To find the horizontal distance, we use the formula: Horizontal distance = Measured distance / (1 + (Percent slope/100)).
Substituting the values into the formula, we have: Horizontal distance = 118.060 / (1 + (2/100)).
To simplify the expression inside the parentheses, we convert the percent slope to a decimal by dividing it by 100. Thus, (2/100) becomes 0.02.
Continuing the calculation, we have: Horizontal distance = 118.060 / (1 + 0.02).
Simplifying further, we add 1 and 0.02 to get 1.02 in the denominator.
Finally, we divide 118.060 by 1.02 to find the horizontal distance, which is approximately equal to 115.61 meters.
Therefore, the horizontal distance along the 2-percent slope is approximately 115.61 meters.
Learn more about horizontal distance here :-
https://brainly.com/question/10093142
#SPJ11
The criminal and traffic code requires that a driver must have a valid driver's license in his/her
immediate possession at any time when operating a motor vehicle.
True
False
Answer:
true
Explanation:
the answer is true because if u don't have a valid license when operating a vehicle and you get pulled over you will get in trouble i know this because my parents got in trouble for it once
A 100-mL water sample is collected from the activated sludge process of municipal wastewater treatment. The sample is placed in a drying dish (weight = 0.5000 g before the sample is added), and then placed in an oven at 104 degree C until all the moisture is evaporated. The weight of the dried dish is recorded as 0.5625 g. A similar 100-mL sample is filtered and the 100-mL liquid sample that passes through the filter is collected and placed in another drying dish (weight of dish before sample is added is also 0.5000 g). This sample is dried at 104 degree C and the dried dish's weight is recorded as 0.5325 g. Determine the concentration (in mg/L) of total solids, total dissolved solids, total suspended solids, and volatile suspended solids, (Assume that VSS = 0.7 times TSS.)
The concentrations are as follows:
Total solids (TS): 625 mg/L
Total dissolved solids (TDS): 300 mg/L
Total suspended solids (TSS): 325 mg/L
Volatile suspended solids (VSS): 227.5 mg/L
To calculate the concentrations of total solids (TS), total dissolved solids (TDS), total suspended solids (TSS), and volatile suspended solids (VSS), we need to use the given weights and volumes.
First, let's calculate the weight of solids in the original sample:
Weight of solids in the original sample = Weight of dried dish with sample - Weight of dried dish without sample
= 0.5625 g - 0.5000 g
= 0.0625 g
Next, let's calculate the concentration of total solids (TS):
Concentration of TS = (Weight of solids in the original sample / Volume of sample) x 1000
= (0.0625 g / 100 mL) x 1000
= 625 mg/L
To calculate the concentration of total dissolved solids (TDS), we need to subtract the weight of suspended solids from the weight of total solids:
Weight of suspended solids = Weight of dried dish with filtered sample - Weight of dried dish without sample
= 0.5325 g - 0.5000 g
= 0.0325 g
Weight of dissolved solids = Weight of total solids - Weight of suspended solids
= 0.0625 g - 0.0325 g
= 0.0300 g
Concentration of TDS = (Weight of dissolved solids / Volume of sample) x 1000
= (0.0300 g / 100 mL) x 1000
= 300 mg/L
To calculate the concentration of total suspended solids (TSS):
Concentration of TSS = (Weight of suspended solids / Volume of sample) x 1000
= (0.0325 g / 100 mL) x 1000
= 325 mg/L
Finally, to calculate the concentration of volatile suspended solids (VSS):
Concentration of VSS = 0.7 x Concentration of TSS
= 0.7 x 325 mg/L
= 227.5 mg/L
Know more about Total dissolved solids here:
https://brainly.com/question/30258068
#SPJ11
By using some sorting technique an array of 8 elements was sorted and the sorting algorithm found the larger number first .The elements of an array in order 2 4 5 7 8 1 3 6 after 4 iteration.
The sorting algorithm found the larger number first in the array, resulting in the order 8 7 6 5 4 3 2 1 after 4 iterations.
The given array had 8 elements: 2, 4, 5, 7, 8, 1, 3, 6. During the sorting process, the algorithm compares adjacent elements and swaps them if they are in the wrong order. In this case, the algorithm prioritized finding the larger numbers first. After four iterations, the largest number (8) moved to the first position, followed by 7, 6, 5, and so on, resulting in the sorted order of 8, 7, 6, 5, 4, 3, 2, 1. It's important to note that the specific sorting algorithm used and its implementation details could affect the exact number of iterations required and the resulting order.
Learn more about algorithm here :-
https://brainly.com/question/21172316
#SPJ11
Steam in a heating system flows through tubes whose outer diameter is 5 cm and whose walls are maintained at a temperature of 198.06°C. Circular copper alloy fins (k =285 W/m · °C) of outer diameter 6 cm and constant thickness 1 mm are attached to the tube. The space between the fins is 3 mm, and thus there are 250 fins per meter length of the tube. Heat is transferred to the surrounding water at T= 43.06°C, with a heat transfer coefficient of 5300 W/m2 · °C. Determine the increase in heat transfer from the tube per meter of its length as a result of adding fins and fin effectiveness
Answer:
rf
Explanation:
attached to the tube. The space between the fins is 3 mm, and thus there are 250 fins per meter length of the tube. Heat is transferred to the surrounding water at T= 43.06°C, with a heat transfer coefficient of 5300 W/m2 · °C. Determine the increase in heat transfer from the tube per meter of its length as a resu.
Can some one help me with this plumbing question. Even just a guess.
Plz no shady links
Answer:
true
Explanation:
why is the frequency of a syncrhonous gnerator locked into ts rate of shaft rotation
The frequency of a synchronous generator is locked into its rate of shaft rotation due to the fundamental principle of electromagnetic induction. In a synchronous generator, electrical energy is produced by rotating a magnetic field within a set of stationary coils, known as stator windings. The rotation of the magnetic field induces a voltage in the stator windings.
The frequency of the generated voltage is directly proportional to the speed of rotation of the generator's rotor, which is connected to the shaft. According to Faraday's law of electromagnetic induction, the voltage induced in a conductor is proportional to the rate of change of magnetic flux passing through it. In the case of a synchronous generator, the magnetic flux is produced by the rotor's magnetic field and the rate of change of flux is determined by the rotational speed of the rotor. To maintain synchronization between the generator and the connected electrical system, the frequency of the generated voltage must match the frequency of the power system. Therefore, the rotational speed of the generator's shaft is precisely controlled to ensure that the frequency of the generated voltage remains synchronized with the desired system frequency. By locking the frequency of the synchronous generator to the rate of shaft rotation, it ensures that the electrical power generated by the generator is in harmony with the rest of the power system, allowing for efficient and reliable operation of electrical grids and interconnected power networks.
Learn more about electromagnetic induction here:
https://brainly.com/question/3265594
#SPJ11
do modern machines typically pass subroutine parameters by stack
It is usually not okay to change the value of the EBP register within the procedure when passing parameters to a procedure on the stack.
A procedure, also known as a subroutine, is a series of instructions that are implemented in a program to perform a specific task. The procedure is executed only when it is called or invoked by the main program or other subroutines in the program.
The calling function provides data to the called function by transferring it through the function parameters or arguments.It is generally considered a good programming practice to utilize a function's parameters to pass data to the function.
The stack is frequently used to transfer parameters and return data between a calling function and a called function in a program.A stack is a Last-In-First-Out (LIFO) data structure that is used to store and retrieve data in a program.
Learn more about stack on:
brainly.com/question/15242038
#SPJ4
the three elements to perimeter security include all except:
The three elements to perimeter security include all except **physical barriers**.
Perimeter security typically consists of three key elements: **detection**, **deterrence**, and **response**. Detection involves the use of various technologies and systems to identify potential threats or breaches in the perimeter, such as intrusion detection sensors, video surveillance cameras, and motion detectors. Deterrence focuses on implementing measures and strategies to discourage unauthorized access, such as fencing, access control systems, and security signage. Response refers to the planned actions and procedures to be taken in the event of a security breach, including alarm systems, security personnel, and incident response protocols. Physical barriers, such as walls, fences, and gates, are often considered an integral part of perimeter security but are not one of the three elements specifically mentioned.
Learn more about Perimeter security here:
https://brainly.com/question/14989492
#SPJ11
Show that if a square matrix A satisfies he equation A2 +2A + I = 0, then A must be invertible. what is the inverse?
Answer: A is invertible and the inverse is given by A⁻¹ = -1/ (A + 2I).
Explanation: Given that the matrix A satisfies the equation A² + 2A + I = 0.
To show that A is invertible, we must show that det(A) ≠ 0 since the determinant of a matrix is 0 if and only if the matrix is not invertible.A² + 2A + I = 0⇒ A² + 2A = -I⇒ A(A + 2I) = -I⇒ A = -1/ (A + 2I)Since the inverse of a matrix is unique if it exists, the above formula shows that A⁻¹ exists.
Therefore, A is invertible and the inverse is given by A⁻¹ = -1/ (A + 2I).
Learn more about square matrix here https://brainly.in/question/55204637
#SPJ11
Considering the reverse bias current equation for below break down voltages, Vbr, what is the value of m for n+p silicon diode? ID(avalanche) = Io / I – (Vapplied/Vbr)^m O approximately 2 O approximately 3 O approximately 4 O approximately 1 O None
Considering the reverse bias current equation for below break down voltages, The value of m for n+p silicon diode is approximately 3. This is because the avalanche breakdown region is a non-linear region, and the current increases as the voltage increases to the power of 3.So option 3 is correct.
The equation for the reverse bias current in the avalanche breakdown region is:
ID(avalanche) = Io * (Vapplied/Vbr)^3
where:
ID(avalanche) is the avalanche breakdown current (A) Io is the reverse saturation current (A) Vapplied is the applied voltage (V) Vbr is the breakdown voltage (V)The value of m can be determined experimentally, and it is typically in the range of 2 to 4. For n+p silicon diodes, the value of m is typically about 3.Therefore option 3 is correct.
To learn more about silicon diode visit: https://brainly.com/question/30762286
#SPJ11
A 0.5 MHz antenna carried by an airplane flying in air over the ocean generates a plane wave that is normally incident upon the air-water interface. The amplitude of the incident electromagnetic wave is 3 (kV/m). The airplane is trying to communicate with a submarine which is submerged below the ocean surface. The submarine's receiver requires a minimum signal amplitude of 0.01 (mu V/m). Ocean water has the following material properties epsilon _r = 81 mu _r =1 sigma = 5 S/m From this information, what is the maximum depth d of the submarine for which successful communication is possible?
The maximum depth of the submarine for which successful communication is possible is 433 meters.
From the given information:
Frequency of the antenna (f) = 0.5 MHz,
The amplitude of the incident electromagnetic wave (Ei) = 3 (kV/m),
Minimum signal amplitude of the submarine receiver (Er) = 0.01 (µV/m),
The relative permittivity of ocean water (εr) = 81,
Permeability of free space (µo) = 4π x 10^-7 H/m,
The conductivity of ocean water (σ) = 5 S/m.
Formula used: We will use the following formula to solve the problem:
Er = Ei x e^-αd,
Where Er is the minimum signal amplitude of the receiver, Ei is the amplitude of the incident electromagnetic wave, α = 2πf√(εr µr (1+jσ/ωεr µr )) is the attenuation constant, and d is the depth of the submarine.
According to the problem, we are given the values of Er and Ei. We need to find out the value of d.
To find the value of d, we need to calculate the value of α.
α = 2πf√(εr µr (1+jσ/ωεr µr ))
Substituting the given values, we get;
α = 2π x 0.5 x 10^6 √(81 x 4π x 10^-7 (1+j5/(2π x 0.5 x 10^6 x 81 x 4π x 10^-7)))
α = 0.159 Np/m.
Now, we will substitute the value of Er, Ei, and α in the equation of
e^-αd.Er = Ei x e^-αd
e^-αd = Er/Ei
e^-0.159d = 0.01 / (3 x 10^6)
Taking the natural logarithm of both sides, we get;
-0.159d = ln (0.01 / (3 x 10^6))-0.159d = -11.29d = 71m.
As per the problem, the submarine is submerged below the ocean surface. Hence, the maximum depth of the submarine for which successful communication is possible is;
d = 71m x √(81) = 433 meters.
Therefore, the maximum depth of the submarine for which successful communication is possible is 433 meters.
Learn more about the successful communication of submarines at:
brainly.com/question/13889850
#SPJ11
recursive methods often have fewer local variables than the equivalent nonrecursive methods. T/F
The given statement is True: Recursive methods often have fewer local variables than the equivalent non-recursive methods. A recursive method is a method that calls itself.
To complete a job, a recursive method divides the task into a few sub-tasks. A recursive method typically has fewer local variables than an equal non-recursive method. Recursive methods are commonly utilized to solve problems that can be broken down into smaller, simpler problems. Recursion makes use of a stack to execute the recursive function. When a function is called, a stack frame is created on the stack that includes the return address and all local variables. The stack frame is then popped when the function returns.
Since the local variables of a function are stored on the stack frame, recursive functions usually have fewer local variables than non-recursive functions to save memory. Recursion is useful for traversing data structures like trees or graphs. It is also utilized in divide-and-conquer algorithms like quicksort and merge sort, as well as backtracking algorithms like maze-solving and subset generation.
know more about Recursive methods
https://brainly.com/question/29238776
#SPJ11
use clingo to find all solutions to the 8 queens problem that have no queens in the 4x4=16 squares in the middle of the board
To use Clingo to find all solutions to the 8 queens problem that have no queens in the 4x4=16 squares in the middle of the board, Define the rules First, Add the constraint Next, run Clingo to find all solutions that meet the defined rules and constraints.
To find all solutions to the 8 queens problem using clingo while excluding the 4x4 middle squares of the board, you can define the problem using the following clingo program:
% Define the board size
#const N = 8.
% Define the positions of the middle squares
middle(2,2). middle(2,3). middle(3,2). middle(3,3).
middle(6,6). middle(6,7). middle(7,6). middle(7,7).
% Define the column and row constraints
1 { queen(Col, Row) : Col=1..N } 1 :- Row=1..N.
:- queen(Col1, Row1), queen(Col2, Row2), Col1 != Col2, Row1 = Row2. % No two queens in the same row
:- queen(Col1, Row1), queen(Col2, Row2), Col1 = Col2, Row1 != Row2. % No two queens in the same column
% Define the diagonal constraints
:- queen(Col1, Row1), queen(Col2, Row2), Col1 - Row1 = Col2 - Row2. % No two queens in the same upward diagonal
:- queen(Col1, Row1), queen(Col2, Row2), Col1 + Row1 = Col2 + Row2. % No two queens in the same downward diagonal
% Exclude the middle squares
:- queen(Col, Row), middle(Col, Row).
% Find all solutions
#show queen/2.
Save the above code in a file named queens.lp and then execute clingo on the command line with the following command:
clingo queens.lp
Clingo will output all the solutions to the 8 queens problem that have no queens in the 4x4 middle squares of the board.
To learn more about 8 queens problem:
brainly.com/question/16987854
#SPJ4
An engineering firm specializes in designing wood-framed houses. Which organizations would it be ethical for the owner of that firm to belong to? I. The local Rotary Club II. The local Chamber of Commerce III. A national timber-research foundation IV. A pro-logging lobbying group. a) III only b) All of them. c) I and II. d) III and IV Explain your answer(s):
An engineering firm that specializes in designing wood-framed houses would be ethical for the owner of that firm to belong to the organizations such as The local Rotary Club, The local Chamber of Commerce, and a national timber-research foundation because they all relate to their specialization. However, it would not be ethical for the owner of that firm to belong to a pro-logging lobbying group. The answer is option c) I and II.I.
The local Rotary Club: Belonging to this organization is ethical because it is a social organization that aims to bring business and professional leaders together to provide humanitarian services, encourage high ethical standards in all vocations, and help build goodwill and peace in the world. As an engineering firm that specializes in designing wood-framed houses, it is ethical for the owner to belong to this organization.II. The local Chamber of Commerce: The local Chamber of Commerce is ethical for the owner of the firm to belong to since it is an organization that represents the interests of businesses and commercial organizations within a particular region or area. Since the engineering firm specializes in designing wood-framed houses, it would be ethical for the owner to belong to the Chamber of Commerce since it is an organization that represents businesses like theirs. III. A national timber-research foundation: The owner of the firm can belong to a national timber-research foundation because it relates to their specialization. A national timber-research foundation is an organization that carries out research in the use of timber in construction. Since the engineering firm specializes in designing wood-framed houses, it is ethical for the owner to belong to this organization. IV. A pro-logging lobbying group: Belonging to this organization is unethical for the owner of the firm. This is because the pro-logging lobbying group aims to influence public policies that favor logging operations. Belonging to this organization as an engineering firm that specializes in designing wood-framed houses could raise ethical concerns as this could result in a conflict of interest.
Learn more about engineering firm here:-
https://brainly.com/question/15297307
#SPJ11
By using some sorting technique, an array of 8 elements was sorted and the sorting algorithm found the largest number first. The elements of the array are in the order: 24578136 after 4 iterations.
Based on above condition(s) which statement would be valid?
Pick ONE option
a. Algorithm would be neither merge sort nor insertion sort.
b. Algorithm would be insertion sort not merge sort.
c. Algorithm would be merge sort not insertion sort.
d. Algorithm is selection sort.
e. None
The correct option is d. Algorithm is selection sort.
The sorting technique found the largest number first. This implies that the algorithm used to sort the array must be a sorting algorithm that makes use of selection. Here, selection sort is an algorithm that can sort an array by selecting the smallest element of the unsorted list and placing it at the beginning of the list.The elements of the array are in the order: 24578136. After the first iteration, the largest number is already in place, and the remaining numbers need to be sorted. This implies that the largest number found in the first iteration is 8. After the second iteration, the largest number is 7. After the third iteration, the largest number is 6. Therefore, the total number of iterations is four.This means that the algorithm is selection sort. Hence, option d is correct.
Learn more about Algorithm here:
https://brainly.com/question/28724722
#SPJ11
Server
Determine whether the desktops are on a hardware or cloud-based server. Also specify the version of the OS server.
Physical [Insert X and specify version if server is physical.]
Cloud-based [Insert X and specify version if server is cloud-based.]
Standard Hardware for Operating System Types
Determine the hardware requirements:
[Insert hardware requirements here.]
Servers can be of two types: physical or cloud-based servers. Desktops can be on a physical or cloud-based server. The type of server will depend on the organization's needs and the resources available. In this case, the server is not specified. Therefore, it is not possible to determine if the desktops are on a physical or cloud-based server.
The Operating System (OS) Server is a software program that manages the hardware and software resources of a computer network. It provides server applications, such as file sharing, printing, and directory services. The version of the OS server will depend on the organization's needs, and it can vary from Windows Server, Linux, Unix, or macOS Server. The hardware requirements will also depend on the server type and the version of the OS server.A physical server is a hardware server that runs an operating system. The physical server runs on a dedicated hardware system, which is separate from the client's computer. The hardware requirements will depend on the server type and the version of the OS server. A physical server can run on a single processor, or it can be a multi-processor system. It can have a minimum of 4GB of RAM, or it can have up to 16GB or more, depending on the server type and the version of the OS server.A cloud-based server is a virtual server that runs on a cloud platform. It provides the same services as a physical server, but it is accessible through the internet. The cloud-based server can have different hardware requirements, depending on the cloud platform and the version of the OS server. It can have a minimum of 1GB of RAM, or it can have up to 8GB or more. The cloud-based server can have one processor, or it can have multiple processors, depending on the cloud platform and the version of the OS server.
To know more about Operating System (OS) visit:
https://brainly.com/question/26044569
#SPJ11
Which of the following metals are widely used as the matrix metals in tungsten carbide and titanium carbide cermets? (a) aluminum (b) chromium (c) cobalt (d) lead (e) nickel (f) vanadium
Cobalt is one of the matrix metals widely used in tungsten carbide and titanium carbide cermets.
Tungsten carbide is a hard material that is used in manufacturing cutting tools, milling and turning inserts, and wear-resistant parts. Cobalt metal is utilized as a matrix metal because of its exceptional bonding characteristics and temperature stability. Titanium carbide (TiC) is another hard material utilized as an abrasive. It is a grey powder that is insoluble in water. Cobalt is also utilized in titanium carbide as a matrix metal because of its capacity to form hard, stable carbides. Cobalt improves the hardness and strength of the carbide ceramic's microstructure and improves its mechanical properties. Cobalt is used as a matrix metal in tungsten carbide and titanium carbide cermets. The metal that is widely used as the matrix metal in tungsten carbide and titanium carbide cermets is cobalt.
know more about Tungsten carbide
https://brainly.com/question/31963394
#SPJ11
What are the 5 general purposes of the Railway labor Act?
The Railway Labor Act aims to promote stability, order, and fairness in the railway and airline industries by encouraging collective bargaining and providing for the peaceful resolution of labour disputes.
The Railway Labor Act (RLA) was enacted in 1926 in the United States and it is the law that governs labor relations in the railroad and airline industries. The act has five general purposes, which are explained in the following paragraphs.
1. Promoting stability and order in the railway and airline industries- The Railway Labor Act was enacted to promote stability and order in the railway and airline industries by preventing and resolving labour disputes. The act requires employers to negotiate with their employees’ representatives in good faith, and it prohibits strikes and lockouts before the completion of a series of procedures established by the National Mediation Board.
2. Preventing interruptions of transportation service- The Railway Labor Act seeks to prevent interruptions of transportation service by encouraging and facilitating the voluntary settlement of disputes between employers and employees. The act provides for mediation, conciliation, and arbitration of disputes, which can help prevent strikes and lockouts.
3. Ensuring the prompt and orderly settlement of disputes-The Railway Labor Act aims to ensure the prompt and orderly settlement of disputes by providing for mediation, conciliation, and arbitration procedures. These procedures help to resolve disputes without resorting to strikes and lockouts.
4. Encouraging collective bargaining-The Railway Labor Act encourages collective bargaining by requiring employers to bargain with their employees’ representatives in good faith. The act recognizes the right of employees to organize and to be represented by a union of their choice, and it requires employers to negotiate with their employees’ representatives over wages, hours, and working conditions.
5. Protecting the rights of employees-The Railway Labor Act protects the rights of employees by prohibiting discrimination against employees because of their union membership or activities. The act also requires employers to provide employees with notice of changes in their working conditions and to provide them with a forum to resolve disputes with their employers. In addition, the act provides for the investigation and settlement of disputes between employees and their employers regarding alleged violations of the act's provisions.
Overall, the Railway Labor Act aims to promote stability, order, and fairness in the railway and airline industries by encouraging collective bargaining and providing for the peaceful resolution of labour disputes.
know more about Railway Labor Act
https://brainly.com/question/8821120
#SPJ11
i gave 15 min to finish this java program
Answer:
class TriangleNumbers
{
public static void main (String[] args)
{
for (int number = 1; number <= 10; ++number) {
int sum = 1;
System.out.print("1");
for (int summed = 2; summed <= number; ++summed) {
sum += summed;
System.out.print(" + " + Integer.toString(summed));
}
System.out.print(" = " + Integer.toString(sum) + '\n');
}
}
}
Explanation:
We need to run the code for each of the 10 lines. Each time we sum numbers from 1 to n. We start with 1, then add numbers from 2 to n (and print the operation). At the end, we always print the equals sign, the sum and a newline character.
Discuss in detail the manners of interaction with opposite gender
Answer:
8 Tips on Better Communication with the Opposite Sex
Put emotions away. Ladies, this one is more aimed at us, for the most part. ...
Forget your pride. In discussions, especially these days, people always want to be the one that prevails. .
Put yourself in their shoes. .
Listen. ...
Respond. ...
Actually communicate. ...
Be detailed. ...
Don't communicate too much.
Explanation:
5. The pin support at A allows _______. Select the one that applies. (a) displacement in the x direction (b) rotation about its central axis (c) displacement in the y direction (d) none of the above 6. The support at B does not allow _______. Select the one that applies. (a) displacement in the x direction (b) rotation about its central axis (c) displacement in the y direction
Answer: Diagram associated with your question is attached below
5) B
6) C
Explanation:
5) The pin support at A allows ; Rotation about its central axis
This is because pin supports does not allow the translation of its structural member in any direction i.e. y or x but only rotation about its axis
6) The support at B does not allow displacement in y direction
This is because roller support allows displacement only in the direction that they are situated and in this case it is the x - direction
Part B 1 pts Consider the following method declaration. Enter a statement that calls the following method. void showMenu();
In the Java programming language, methods are blocks of code that carry out particular tasks. They are called from other locations in a program and can receive parameters as well as return values, depending on the type of method.
As a result, by defining a method, you can write code once and use it several times. Method declaration follows the following syntax in Java:Syntax:returnType methodName(parameterType1 parameterName1, parameterType2 parameterName2, ... parameterTypeN parameterNameN){ body of the method }In this syntax, the returnType indicates the value returned by the method, the methodName is the name given to the method, and parameterName1, parameterName2,..., parameterNameN are the parameters that the method takes in. However, the following is a method declaration:void showMenu();To call this method, use the following statement:showMenu();
A method call is a Java code that uses the method's name and parameters to call or execute the method. This statement is responsible for invoking the method and displaying the menu in this scenario. This is how we can call the method and use it to show the menu.
know more about Java programming
https://brainly.com/question/2266606
#SPJ11
19) based on your review of executables and related artifacts, what is the name of the file that indicates that a user ran
Based on the review of executables and related artifacts, the name of the file that indicates that a user ran is known as a "recent documents" file.
A "recent documents" file is a file or folder that stores the most recently opened documents and files in a program or operating system. This file is frequently referred to as a "recent files" or "recent documents" file. It is possible to locate a user's history of opened documents by examining this file. Recent documents files can be useful in forensic examinations because they can provide a record of recently accessed files by the user.A "recent documents" file can also be found on a file server that provides user access to shared folders and files. It keeps track of all files that have been accessed or modified on that server by the user.
Learn more about recent documents here:-
https://brainly.com/question/29037011
#SPJ11
The standard procedure for dimensioning the location of a house on a site is to dimension ____ of the house from adjacent lot lines. A one side b two sides c two corners d one corner
Answer:
One corner ( D )
Explanation:
when dimensioning the location of a house on site the standard and the acceptable procedure is to ; Dimension One corner of the house
Adjacent lots is a term used to describe parcels of the site that meet each other along their boundary lines. and they also include parcels that may be separated by streets
At a certain instant, the particle of mass m has the position and velocity shown in the figure, and it is acted upon by the force F. Determine its angular momentum about point O and the time rate of change of this angular momentum.
To determine the angular momentum and its rate of change, we need more information, specifically the position vector and velocity vector of the particle, as well as the force vector acting on it.
Please provide the relevant information or a description of the figure so that I can assist you further.
Angular momentum (L) is defined as the cross product of the position vector (r) and the linear momentum vector (p):
L = r x p
The time rate of change of angular momentum (dL/dt) is equal to the torque (τ) applied to the particle:
dL/dt = τ
If the force acting on the particle is known, the torque can be calculated using the equation:
τ = r x F
Once we have the torque, we can determine the angular momentum and its rate of change. Please provide the necessary information so that I can help you with the calculations.
Learn more about momentum here
https://brainly.com/question/30319928
#SPJ11
An industrial boiler consists of tubes inside of which flow hot combustion gases. Water boils on the exterior of the tubes. When installed, the clean boiler has an over all heat transfer coefficient of 300 W/m^2 . K. Based on experience, i is anticipated that the fouling factors on the inner and outer surfaces will increase linearly with time as Ra,t and Ryo-at where a, 2.5 x 10^-11 m2 K/W s and a,-1.0 x 10^-11 m^2 - K/W s for the inner and outer tube surfaces, respectively. If the boiler is to be cleaned when the overall heat transfer coeffi- cient is reduced from its initial value by 25%, how long after installation should the first cleaning be scheduled?
Answer:
the first cleaning be scheduled 1.006 years after installation
Explanation:
Given the data in the question;
U[tex]_{clean[/tex] = 300 W/m².K
first we determine the heat coefficient of the dirt surface;
overall heat transfer coefficient is reduced from its initial value by 25%
U[tex]_{dirt[/tex] = ( 1 - 25%) × U[tex]_{clean[/tex]
U[tex]_{dirt[/tex] = ( 1 - 0.25) × 300
U[tex]_{dirt[/tex] = 0.75 × 300
U[tex]_{dirt[/tex] = 225 W/m².K
next we find the inner fouling factor
[tex]R"_{f ,i[/tex] = [tex]a_it[/tex]
[tex]R"_{f ,o[/tex] = (2.5 × 10⁻¹¹)t
for the outer fouling water;
[tex]R"_{f ,o[/tex] = [tex]a_ot[/tex]
[tex]R"_{f ,o[/tex] = ( 1.0 × 10⁻¹¹ )t
now, we determine the total heat transfer coefficient
[tex]\frac{1}{U}[/tex] = [tex]R"_{f ,i[/tex] + [tex]R"_{f ,o[/tex]
we substitute
[tex]\frac{1}{U}[/tex] = (3.5 × 10⁻¹¹)t
so the first cleaning duration after insulation will be;
[tex]\frac{1}{U} = \frac{1}{U_{dirt}} - \frac{1}{U{clean}}[/tex]
we substitute
(3.5 × 10⁻¹¹)t = [tex]\frac{1}{225} - \frac{1}{300}[/tex]
(3.5 × 10⁻¹¹)t = 0.001111
t = 0.001111 / (3.5 × 10⁻¹¹)
t = 31742857.142857 seconds
t = 31742857.142857 / 3.154 × 10⁷
t = 1.006 years
Therefore, the first cleaning be scheduled 1.006 years after installation
how to calculate the number of pistons required to lift in pltw poe
The calculation for the number of pistons required to lift in PLTW POE depends on specific design factors and cannot be determined without more information.
What factors need to be considered when calculating the number of pistons required for lifting in PLTW POE?To calculate the number of pistons required to lift in PLTW POE (Project Lead The Way Principles of Engineering), you would need specific information about the system design, including factors such as the weight to be lifted, desired lifting capacity, force requirements, and mechanical advantage.
The calculation would involve considering the forces involved, the efficiency of the system, and any additional factors such as safety margins or load distribution.
Without more specific information about the system and its requirements, it is not possible to provide a generic calculation for the number of pistons required.
It is recommended to refer to the PLTW POE curriculum or consult the project guidelines and resources provided by your instructor or educational institution for specific calculations and guidance on determining the number of pistons required for lifting in a given scenario.
Learn more about PLTW POE depends
brainly.com/question/30409110
#SPJ11
If an AC circuit contains both resistive and capacitive components, w
A. Voltage will lead the current in the circuit.
B. The resistance will allow all current to bypass the
circuit's capacitive con
C. Current will lead the voltage in the circuit.
D. The circuit's peak-to-peak voltage level will be reduced by the capacitive
Component
Answer:
C. Current will lead the voltage in the circuit.
Explanation:
The correct option is - C. Current will lead the voltage in the circuit.
Reason -
In the Resistive Capacitive load , current will lead the voltage by 90° .
So, the correct option is Current will lead the voltage in the circuit.
although the __________ approach may make a conflict situation livable, it does not resolve the issue.
approach may make a conflict situation livable, it does not resolve
Select one:
a. Collaborating, Confronting, or Problem Solving
b. Accommodating or Smoothing
C. Avoiding or Withdrawing
d. Competing or Forcing
Although the Accommodating or Smoothing approach may make a conflict situation livable, it does not resolve the issue.
What is an accommodating approach?
An accommodating approach is a method of dealing with conflict by neglecting one's own needs and yielding to the desires of others. The goal is to please the other person by meeting their needs while ignoring one's own. The accommodating approach, though useful, can be seen as disingenuous because the primary aim is to please others rather than resolving the issue.
What is a smoothing approach?
A smoothing approach is an approach to problem-solving that emphasises the need for harmony and peace in interpersonal relationships. This approach involves avoiding confrontation and ignoring minor conflicts. The smoothing approach, on the other hand, can make it easier for everyone to get along, but it does not deal with the underlying issues and can exacerbate conflicts in the long run.
Although the Accommodating or Smoothing approach may make a conflict situation livable, it does not resolve the issue. An accommodating approach is a method of dealing with conflict by neglecting one's own needs and yielding to the desires of others. The goal is to please the other person by meeting their needs while ignoring one's own. The accommodating approach, though useful, can be seen as disingenuous because the primary aim is to please others rather than resolving the issue.A smoothing approach is an approach to problem-solving that emphasises the need for harmony and peace in interpersonal relationships. This approach involves avoiding confrontation and ignoring minor conflicts. The smoothing approach, on the other hand, can make it easier for everyone to get along, but it does not deal with the underlying issues and can exacerbate conflicts in the long run.
Learn more about accommodating approach:
https://brainly.com/question/29554701?referrer=searchResults
#SPJ11