In CuCl2(aq), the solvent is _____.

Answer:

The hotter one loses heat and the cooler one gains heat until they become equal in temperature.

Poverty is defined as a situation in which a family's fundamental necessities, such as food, housing, clothes, and education, are not met. It can lead to additional issues such as low literacy, unemployment, and starvation, among others. Due to a lack of funds, a poor individual is unable to obtain an education and hence remains unemployed. Unemployed people are unable to provide sufficient and healthy food for their families, and their health suffers as a result. A person who is weak lacks the necessary energy for the work. A unemployed individual would always be impoverished. As a result, we might claim that poverty is the basis of all other issues.

The United Nations has created two methods for evaluating poverty: absolute and relative poverty. In developing nations like India, absolute poverty is used to assess poverty. In industrialized countries like the United States, relative poverty is employed to quantify poverty. A poverty line has been established based on the minimum level of income in absolute poverty. If a family's daily income is less than this, they are poor or living in poverty. If a family's daily income exceeds this amount, it is considered non-poor or above the poverty line. The new poverty threshold in India is Rs 32 in rural areas and Rs 47 in cities.

"Poverty is not natural; it is manufactured," said Nobel Laureate and South African leader Nelson Mandela. The preceding remark is correct since most causes of poverty are caused by humans. Poverty has several causes, but the most significant is population growth. Countries' resources and budgets are being strained by rising population. Food, housing, and work are becoming increasingly difficult for governments to supply.

Lack of education, conflict, natural disasters, a lack of job, a lack of infrastructure, political instability, and so on are some of the other factors. For example, a person becomes jobless due to a lack of employment prospects and is unable to earn enough to meet his family's basic needs, resulting in poverty. Lack of knowledge forces a person to accept lower-paying occupations, making him poorer. Lack of infrastructure indicates that a country lacks industry, banks, and other institutions, resulting in a labor shortage. Natural calamities such as floods and earthquakes exacerbate poverty.

A protracted period of civil conflict in certain nations, particularly African ones like Somalia, has resulted in widespread poverty. This is because all of the resources and money are being diverted to the war effort rather than public welfare. Natural catastrophes, such as cyclones, are common in countries like India, Pakistan, and Bangladesh. Every year, these calamities occur, leading poverty to grow.

A poor family's life is affected by poverty. Poor people are unable to consume adequate food and nourishment, and their capacity to work is reduced. His income is further reduced by his reduced capacity to work, leaving him impoverished. Children from low-income families do not receive adequate education or nourishment. They must work in order to support their families, which ruins their childhood. Some of them may be involved in crimes such as theft, murder, and robbery, among others. A poor individual is illiterate and forced to live in slums in unsanitary conditions. In slums, there is no basic sanitation or drinking water, therefore he gets sick frequently and his health deteriorates. A disadvantaged individual is more likely to die young. As a result, all societal ills are linked to poverty.

The Indian government has also taken many steps to reduce poverty in the country. Some of these include establishing job opportunities, population control, and so on. In India, almost 60% of the population still relies on agriculture for a living. The Indian government has taken steps to boost agriculture. In our nation, the government built dams and canals to offer convenient access to water for irrigation. To support agriculture, the government has also made initiatives to make seeds and farming equipment more affordable. The government is also encouraging the cultivation of commercial crops such as cotton rather than food crops. The government is supporting manufacturing in cities in order to create more jobs. 'Ration stores' have also been established by the government. 

Other initiatives include free and obligatory education for children up to the age of 14, scholarships for deserving students from low-income families, and subsidized housing for the poor.

Poverty is a societal ill, but we can help to combat it. For example, we may easily contribute old clothes to the needy, fund a poor child's education, or volunteer to educate impoverished pupils in our spare time. Before you throw food out, keep in mind that someone is still hungry.

Answer:

Only A., the stick structure with no branches and five vertices between the two endpoints.

Explanation:

An alkane is a saturated hydrocarbon compound with no branches- just a series of carbon atoms connected with [tex]{\rm C}-{\rm C}[/tex] single bonds. Heptane is the name for an alkane with [tex]7[/tex] carbon atoms (the prefix "[tex]\verb!hept-![/tex]" means "seven".)

Notice that there are only [tex]6[/tex] carbon atoms in the alkane with the condensed structure formula [tex]{\rm CH_{3}}({\rm CH_{2})_{4}{\rm CH_{3}}[/tex]. The name for that structure would be hexane, not heptane.

In general, the condensed structure formula of an alkane with [tex]n[/tex] carbon atoms ([tex]n > 2[/tex]) is [tex]{\rm CH_{3}}({\rm CH_{2}})_{n-2} {\rm CH_{3}}[/tex]. The correct condensed structure formula for heptane ([tex]n = 7[/tex]) would be [tex]{\rm CH_{3}}({\rm CH_{2}})_{5} {\rm CH_{3}}[/tex].

The structure in choice A is represented as a line-angle formula. As long as no letter is present in the formula, each vertex in the line-angle formula (including the endpoints) represents a carbon atom. Hence, the line-angle formula in choice A would represent a hydrocarbon with [tex]7[/tex] carbon atoms.

A single line denotes a single bond between atoms. All [tex]7[/tex] carbon atoms in this structure are thus joined in a line with [tex]{\rm C}-{\rm C}[/tex] single bonds. Hence, this structure denotes an alkane with [tex]7[/tex] carbon atoms- heptane.

Answer:

D. using bioremediation to speed up existing, natural oil degradation.

Explanation:

Got an A on this.

Explanation:

The correct answer is option D

Answer:

C

Explanation:its right

The correct structure that corresponds to the name 2,2,3-trichloro-3-fluorohexane is both. Thus option C is correct.

Chemical structure is defined as the physical configuration of atoms within a molecule. The molecular geometry of the molecule is determined by its chemical structure. By illustrating how the atoms and chemical bonds are arranged in space within the molecule, chemical structure can be used to establish the molecular geometry of a product. Chemists can now see a crucial visual depiction of a chemical formula thanks to this.

2,2,3-trichloro-3-fluorohexane structure given is both are correct as one of the structure is trans form and the other is cis form of the structure. Option A is trans form while option B is cis form of structure.

Thus, the correct structure that corresponds to the name 2,2,3-trichloro-3-fluorohexane is both. Thus option C is correct.

To learn more about chemical structure, refer to the link below:

https://brainly.com/question/12166462

#SPJ2

Explanation:

resistivity is the reciprocal of cell constant

Compounds are pure substances the are composed of two or more elements chemically bonded. Compounds have a definite composition, so they are the same throughout, which makes them homogeneous.

Answer: 7.82999 g/cm³

Explanation:

1. Divide all of the lengths of the block by 10 to get them from mm to cm

2. Calculate volume of box

3. Calculate density using volume and mass

Explanation:

If 14.0 g of sodium sulfide are reacting, how many molecules of sodium chloride will be produced?

3 Na₂S + 2 AICI36 NaCl + Al2S3

1.08 x 10^23

2.16 x 10^23

2.16 x 10^-23

5.97 x 10^-25

Answer:

one factor is the speed at which crystals are formed

crystals that are formed near or on the surface tend to crystalize faster and therefore are usually smaller crystals deeper in the crust tend to crystalize slower and therefore are larger

Answer:

Nitrous Oxide

Explanation:

Answer:

What changes do you notice? The white you see have undergone coral bleaching. At high temperatures, corals may lose their zooxanthellae, causing corals to lose their color and their main source of food. Once bleaching occurs, the coral colony usually dies.

Explanation:

study well

Arigato

Zirconium - 96 isotope is formed from the beta decay of zirconium-97 , Option C is the correct answer .

Atoms are composed of a cloud of electrons surrounding a dense nucleus that is 100,000 times smaller and comprised of protons and neutrons.

The number of protons(i.e., atomic number, "Z") determines the element.

Isotopes are atoms of the same element that have the same number of protons (i.e., atomic number, "Z") but a different number of neutrons, meaning that their mass number, "A", varies.

Naturally occurring zirconium (⁴⁰Zr) is composed of four stable isotopes

One very long-lived radio isotope (⁹⁶Zr), a primordial nuclide that decays via double beta decay with an observed half-life of 2.0×10¹⁹ years

The second most stable radioisotope is ⁹³Zr, which has a half-life of 1.53 million years.

Thirty other radioisotopes have been observed.

All have half-lives less than a day except for ⁹⁵Zr (64.02 days), ⁸⁸Zr (83.4 days), and ⁸⁹Zr (78.41 hours).

The primary decay mode is electron capture for isotopes lighter than ⁹²Zr

and the primary mode for heavier isotopes is beta decay.

Therefore Zirconium - 96 isotope is formed from the beta decay of zirconium-97 , Option C is the correct answer .

To know more about Isotope

https://brainly.com/question/11680817

#SPJ1

Answer:

It's the third option.

Explanation:

In order for the chemical equation to be correctly it needs the same number of atoms of each element on both sides of the equal sign

Answer:

The BP increases in temperature as you move down the halogen group ( group 7)

Answer:

The trend of boiling points in the the table vary according to the size of the elements atom, if an element has a larger size it will need greater intermolecular forces and heat to break the strong bonds. Therefore Bromine has a larger size followed by chlorine and later fluorine, and this has shown in their boiling points

Answer: Clouds need two things to form: cool air and particles on which water vapor can condense. Clouds form as air cools. Cold air cannot hold as much water vapor, so the water vapor condenses. Water vapor condenses on small particles in the atmosphere, such as smoke, salt, and dust. As a result, clouds form.

Explanation: correct on edge

Answer:

How do you find the concentration of OH in a solution?

The hydroxide ion concentration can be found from the pOH by the reverse mathematical operation employed to find the pOH. [OH-] = 10-pOH or [OH-] = antilog ( - pOH) Page 2 Example: What is the hydroxide ion concentration in a solution that has a pOH of 5.70? On a calculator calculate 10-5.70, or "inverse" log (- 5.70).Explanation:

Answer:

The concentration of Mg3P2 solution = 0.24mol/L

Explanation:

Mass = 81.1g

Volume = 2.5L

Concentration (C) of a solution = [tex]\frac{Moles (n)}{Volume (V)}[/tex]

but moles = [tex]\frac{mass}{Molar mass}[/tex]       and      Molar mass of Mg3P2 = 134.88g/mol

Moles = [tex]\frac{81.1g}{134.88g/mol}[/tex]

          = 0.60mol

hence the concentration can be calculated by;

C =  [tex]\frac{0.60mol}{2.5L} \\[/tex]

  = 0.24mol/L or 0.24M

The new pressure of the gas would be 505.58 torr

According to Boyle's law, the pressure of a gas is inversely proportional to its volume, provided that the temperature is constant.

This can be mathematically represented as: P1V1 = P2V2

In this case, P1 = 759.4 torr, P2 is what we are looking for, V1 = 97.6 mL, and V2 = 146.6 mL

Hence, P2 = P1V1/V2 = 759.4x97.6/146.6 = 505.58 torr

More on Boyle's law can be found here: https://brainly.com/question/1437490

#SPJ1

Answer:  4 A1+3 02 → 2 Al2O3

Explanation: Two different atoms combines together to produce a compound.

Answer:

c) Fe + CuCl2 → FeCl2 + Cu

Explanation: Synthesis Reaction is when you get same thing on the other side even if its not in the same order after you add the components.

Herd behavior in elephants ensures that individuals are protected and the species is perpetuated.

It is a behavior that is characteristic of animals that form herds.

Herds generally refer to groups of animals that live or move together or both.

By protecting individual elephants that are weak or young from being preyed upon by lions and leopards, more members of the population survive.

When more members of the population survive, the species is perpetuated and the likelihood of going into extinction reduces.

More on herd behavior can be found here: https://brainly.com/question/15112922

#SPJ1

Answer:

the best tool for separating marbles from water is evaporation disc

Answer:

0.00420

Explanation:

The equation is Q=mc(T(final)-T(initial), where c is the specific heat, Q is heat supplied, m is mass, T(final) is final temperature and T(initial) is initial temperature (you'll see this written as delta T, which means change in temperature).

2520 = Q

m = 10.0kg; answer choices are in g, not kg, so multiply by 1000 to get m in g; m = 10000 g

Plug in the values you have and solve for c.

2520=(10000)(c)(70-10)

2520=600000c

c=0.0042 j/(gc)

Answer:

4.2 j/kg-C      =  .0042 j / (g-C)

Explanation:

Specific heat units are    j / kg-C

   2520 J  / [ (10 kg)(70-10 C)]   = 4.2   j / kg-C

The amount of absorption force is not same at all time and at all where .

It has difference at different time periods

So during those the curve goes up and down and repeat this flow

So there are dips