The pressure is always higher on the outside of the curve because this side will push the flow and make a curve.
What is streamlines curve?Streamlines curve is a streamline that have shape like curve. Streamlines curve can created because there is a pressure gradient in different level, if the pressure gradient doesn't have different level it will continue streamline and create straight line not a curve.
The higher level of pressure gradient that make streamline curve will push the flow into one side and create the opposite of curve direction which is been called as outside of the curve. Because of this, wherever the higher level of pressure is located it will push the flow and make curve and that position will be outside of the curve.
Learn more about pressure gradient here:
brainly.com/question/14336958
#SPJ4
Let P(x) and Q(x) be predicates and suppose D is the domain of x. For the statement forms in each pair, determine whether (a) they have the same truth value for every choice of P(x), Q(x), and D, or (b) there is a choice of P(x), Q(x), and D for which they have opposite truth values.
Answer:
just use the formal man .
The ______ must be placed on timbers or cribbed so as to spread the weight of the crane and the load over a large enough area.
Note that the outrigger must be placed on timbers or cribbed so as to spread the weight of the crane and the load over a large enough area.
What is an outrigger and what is it used for?An outrigger is a device that is used to provide stability and support for a structure or vehicle. It consists of a beam or frame that extends horizontally from the main body of the structure or vehicle, usually supported by one or more additional beams or poles that are attached to the ground or other surfaces.
An outrigger or double-hull watercraft produces stability owing to the distance between its hulls rather than the form of each individual hull, as opposed to a single-hulled vessel.
Outriggers are used for a number of purposes, including:
Outriggers are commonly used on boats and ships to give additional stability and support, especially in strong seas.Cranes utilize outriggers to assist balance the cargo being hoisted and keep the crane from tipping over.Outriggers are employed on a variety of construction equipment, including excavators and bulldozers, to offer stability when working on uneven terrain.Learn more about outrigger:
https://brainly.com/question/23653582
#SPJ1
in a dry type transformer, the size and operating temperature of the unit is determined by the type of?
Dry-type transformers, unlike liquid-filled counterparts, do not use liquid to dissipate excess heat and meet temperature classification requirements. The coils in a dry-type transformer, on the other hand, are made of a gaseous or dry insulation medium.
The following factors influence the unit's size and operating temperature:
Temperature ratings (i.e., ambient temperature, winding temperature, or temperature rise) are normally measured depending on the design of transformers. whether the transformer is dry or oil-immersed. The majority of the cases only contain oil-immersed transformers.
As a result, the temperature ratings can be identified by the transformers' cooling system. As a result, the dry type transformer contains an air natural or air forced (ANAF) system. We don't use oil for cooling here, so we can't use temperature measuring instruments like thermometers, oil temp indicators, or winding temp indicators. All of these are only suitable for oil insulating transformers.
To know more about Dry-type transformers, visit: https://brainly.com/question/29673808
#SPJ4
A cylindrical piece of steel 25 mm (1.0 in.) in diameter is to be quenched in moderately agitated oil. Surface and center hardnesses must be at least 55 and 50 HRC, respectively. Which of the following alloys will satisfy these requirements: 1040, 5140, 4340, 4140, and 8640? Justify your choice(s). Use the following figures as necessary
The following alloys 8660,8640,4140,4340 and 5140. A metal alloy is a material that combines multiple metals or combines a metal with non-metallic components.
In water that is only slightly stirred, a cylindrical piece of steel is to be quenched. The minimum required surface and centre hardness is:
[tex]H_{sur}=50[/tex] HRC
[tex]H_{c}[/tex]=40HRC
D=50 mm
Given alloys: 1[tex]040, 5140, 4340, 4140, 8620, 8630, 8640,[/tex]and [tex]8660[/tex].
Quenching cylindrical bars in slightly disturbed water:
Since the centre hardness of 8660,8640,4140,4340, and 5140 is greater than 40 HRC and the surface harness is greater than 50HRC, they are eligible. There must be at least one metal in a mixture of chemical elements known as an alloy. The qualities of a metal, such as electrical conductivity, ductility, opacity, and shine, will all be kept in the alloy's ultimate product, unlike chemical compounds with metallic bases. An alloy may, however, also possess extra qualities not seen in pure metals, including greater strength or hardness. In certain cases, an alloy may maintain essential properties while lowering the material's overall cost. In other cases, the combination gives the individual metal elements added benefits like corrosion resistance or mechanical strength.
Learn about alloys here
https://brainly.com/question/24842164
#SPJ4
the repetition structures we have discussed this week can be used interchangeably; however, there are a few occasions when one is clearly preferable to another. discuss, in detail as well as illustrate with an example, how to determine which structure to use when there is no clear indication. additionally, how much of the choice should be based on personal preference and how much on conventional practices?
When a program needs to process one or more instructions repeatedly until a condition is met, at which point the loop stops, repetition structures, sometimes known as loops, are utilized.
Numerous programming tasks are monotonous and rarely differ from one another. Counting and accumulating running totals, repeatedly accepting input data, and recalculating output values that only stop upon entry of a designated value are a few examples of such repetition. Another is the continuous checking of user data entries until an acceptable entry, such as a valid password, is made. Depending on the loop termination criterion, these repetition control structures can be used to repeatedly run the statements in the loop body.
Learn more about input here-
https://brainly.com/question/24179864
#SPJ4
In order to perform a binary search on an array, which of the following must be true (select all that apply)?
a. The array must be ordered
b. The array must contain integers
c. The array must have an even number of elements
d. The array must have an odd number of elements
In order to perform a binary search on an array, the array must be ordered. Thus, option (A) is true regarding this statement.
Binary search is an efficient searching algorithm that finds an element from a sorted list of elements. Binary search functions by repeatedly dividing in half the portion of the list that could have the element, until it has been narrowed down the possible locations to just one. Binary search can only be implemented using an array of sorted values.
Therefore, the required condition to perform binary search on an array or list is that the array must be ordered or sorted.
You can learn more about binary search at
https://brainly.com/question/15190740
#SPJ4
the video discusses four potential models of how the expansion of the universe changes with time. drag the correct model description from the left-hand column to the appropriate blank in the sentences in the right-hand column. use each term only once.
The coasting model assumes that the expansion rate of the universe always stays the same.
All four models predict that the universe is expanding today.
The recollapsing model predicts that the universe will someday contract.
The critical model predicts that the average density of mass in the universe is exactly the critical density.
The accelerating model predicts that the universe is expanding faster now than it was in the distant past.
What is the model about?This type of thinking can be practiced using a critical thinking model. It provides guidelines for asking the right questions, coming to logical conclusions, and explaining how we did it all while assisting us in recognizing our own thinking biases and enabling us to attempt viewing the world objectively.
An acceleration model is a type of model that forecasts time-to-failure as a function of operating stresses. Models of physics or kinetics that describe the failure mechanism are frequently used to create acceleration models. Acceleration models typically draw their foundation from the physics or chemistry of a specific failure mechanism.
Learn more about model on:
https://brainly.com/question/17764105
#SPJ1
when hammer test is preferable than concrete cubic test?
Answer:
Rebound Hammer test is a Non-destructive testing method of concrete which provide a convenient and rapid indication of the compressive strength of the concrete. The rebound hammer is also called as Schmidt hammer that consist of a spring controlled mass that slides on a plunger within a tubular housing.
The operation of rebound hammer is shown in the fig.1. When the plunger of rebound hammer is pressed against the surface of concrete, a spring controlled mass with a constant energy is made to hit concrete surface to rebound back. The extent of rebound, which is a measure of surface hardness, is measured on a graduated scale. This measured value is designated as Rebound Number (rebound index). A concrete with low strength and low stiffness will absorb more energy to yield in a lower rebound value.
a(n) ____ is any numeric variable you use to count the number of times an event has occurred.
It is incremented each time the event happens, providing a count of the number of times the event has happened.
Using Counters to Track Frequency of EventsA counter is a useful tool for tracking the frequency of events. By incrementing the counter each time the event occurs, it provides a numerical value that can be used to measure the number of times the event has occurred. Counters can be used to track a wide range of events, from the number of visitors to a website, to the number of times a certain keyword is used in a document. They are also useful for measuring patterns of behavior, as the counter can be set to reset at specific intervals to measure how often the event occurs over time.
Learn more about counters: https://brainly.com/question/1581078
#SPJ4
Is there a way to know whether the model I downloaded is made using a pirated copy of Solidworks/ Autodesk Etc?
Answer:
NO
Explanation:
No, there is no way to know if the model you downloaded was made using a pirated copy of Solidworks or Autodesk. It is possible to download free models from legitimate sources such as 3D Warehouse, but it is also possible to download models from sites that are known to host pirated models. The only way to be sure that you are downloading a legitimate model is to purchase it from an authorized source.
if you need to weld two pieces of aisi 1018 cd steel together, what will be the yield strength of the steel in the vicinity of the weld in units of kpsi?
if you need to weld two pieces of AISI 1018 cd steel together, the yield strength of the steel in the vicinity of the weld will be 64 kpsi.
What is yield strength?Yield strength is a measure of the maximum stress that a material can withstand without deforming. It is a practical approximation of the elastic limit and is defined as the stress at which a material exhibits a specified permanent deformation.
Yield strength is critical in structural engineering. When designing a component, for example, it must support the force incurred during use and must not deform plastically. To put it another way, a material with adequate yield strength should be chosen.
The yield strength is often used to calculate the maximum permissible load in a mechanical part because it represents the upper limit to forces that can be applied without causing permanent deformation. A variety of yield criteria for various materials have been established.
Learn more about yield strength
https://brainly.com/question/13259307
#SPJ4
Robots can be classified into five groups. The code used for these classifications consists of a set of _____ letters, which refer to types of robot joints.
The code used for robots classifications consists of a set of three letters.
What is robots classifications?Robot classifications is classification for robot depend on their function and capabilities.
Autonomous Mobile Robots (AMRs) is first classification of robot for robot that have limited human intervention or input and can move mobile freely with calculation to make decision in near real-time.
Automated Guided Vehicles (AGVs) is second classification of robot for robot like AMRs but need more human input for deciding their paths so it can't move freely.
Articulated Robots is third classification of robot for robot that can emulated human body parts and their function.
Humanoids is next classification of robot for robot that have form like human and human center oriented. It is similar to AMRs except to their form that like human.
Cobots is last classification of robot for robot that must have human input to perform, this robot can't autonomous to perform but it will help human to complete their task.
Learn more about robot here:
brainly.com/question/27571415
#SPJ4
Which of these is true for prototypes?
a. Horizontal Prototypes does some processing apart from the required for presenting the productâs user interface
b. Vertical Prototype realizes part or all of a productâs user interface
c. All of the mentioned
d. None of the mentioned
Answer:c
Explanation:
classical conditioning is the study of behaviors that are____ , whereas operant conditioning studies behaviors that are____
Operant conditioning examines proactive behaviour, whereas classical conditioning examines reactive behaviour.
That is what type of an operant is it?A rat clicking its lever with response to food, an infant screaming in relation to maternal care, or small talk in response to the social engagement are all examples of operant responses.
What is the operant concept?Operant conditioning is based on the fundamental idea that a sensory antecedent somehow triggers an action, which in turn triggers a result. This kind of training makes use of primary, supplementary, and generalised reinforcers—both positive and negative. Food, shelter, and/or water are the 3 main reinforcers.
To know more about Operant visit :
https://brainly.com/question/13144439
#SPJ1
the goal of one-shot learning is to find values for the weights wi using a large provided set of training data. once those weights have been found, they can be used to estimate prices for additional houses.
One-shot learning is an ML-based object classification algorithm that assesses the similarity and difference between two images. It's mainly used in computer vision.
One-shot learning aims to educate the model how to make its own inferences about the similarities between them based on the fewest possible pictures. One-shot learning is a common issue with object classification in computer vision. One-shot learning seeks to categorise things from one or a small number of instances, in contrast to the majority of machine learning-based object categorization algorithms that need training on hundreds or thousands of examples. When a machine is trained to learn from data without ever having to view the data itself, this process is known as zero-shot learning. Few-shot learning is the process of teaching a computer how to utilise data to learn from a particular perspective. A computer may be taught to learn from data using both zero-shot and few-shot learning techniques.
To learn more about One-shot learning click the link below:
brainly.com/question/29806553
#SPJ4
A ramjet has a constant-diameter combustion chamber followed by a nozzle whose throat diameter is 0.94 times the chamber diameter. Air enters the combustion chamber with T, 1450 K and M-0.3. How high may the temperature rise in the combustion chamber without necessarily changing the chamber inlet conditions? For simplicity, neglect frictional losses in the chamber and nozzles and assume that the working fluid has a specific heat ratio of 1.333.
The temperature of the air passing through the combustion chamber may increase to 2567 K. The amount of temperature increase will depend on the expansion ratio of the nozzle, as well as the specific heat ratio of the working fluid.
The temperature rise in a ramjet's combustion chamber is determined by the ratio of the area at the throat of the nozzle to the area of the inlet to the combustion chamber. The temperature of the air entering the combustion chamber will remain constant as long as the inlet conditions remain the same. However, the temperature of the air will increase as it passes through the combustion chamber and expands in the nozzle, resulting in an increase in temperature.
The maximum temperature increase in the combustion chamber can be calculated using the following formula:
Tmax = Tin x (gammaⁿ)
Where
Tmax = the maximum temperature increase in the combustion chamber. Tin = the inlet temperature of the air entering the chamber.
Gamma = the specific heat ratio of the working fluid.
n = the expansion ratio of the nozzle.
In the given example, the maximum temperature increase in the combustion chamber would be calculated as follows:
Tmax = 1450 K x (1.333²) = 2567 K.
Learn more about temperature, here https://brainly.com/question/11464844
#SPJ4
given the following instruction list and latencies, a reservation station with two loaders and one multiplier and one adder
Tomasulo's algorithm implements register renaming through the use of what are called reservation stations.
As soon as instruction operands become available, reservation stations act as buffers to retrieve and store them. Source operands can point to other reservation stations or the register file. Instead of having to wait for the data value to be saved in a register and reread, reservation stations allow the CPU to fetch and reuse a data value immediately after it has been calculated. They can choose the reservation station from which they wish their input to be read when instructions are given. In order to accommodate out-of-order and speculative instruction execution, the Tomasulo algorithm is extended with a hardware component known as a re-order buffer (ROB). The extension requires that commands be committed in the correct order.
To learn more about reservation stations click the link below:
brainly.com/question/27127828
#SPJ4
Identify the true statement for the given 3-bit shift-right and load register if Dis 011, shr_in is 1, shr is 1. Id is o, and Q is 010. Consider arising clock edge. shr_in D shr ld 3-bit shift-right/load register O I. The present value is shifted: therefore, Q becomes 101 O II. The present value is shifted; therefore, Q becomes 111 O III. The present value of D is loaded into Q: thus, Q becomes 011 O IV. The present value of Q is maintained; therefore, Q remains 010
A 0 is added on the other end and the least-significant bit is lost when shifting right using a logical right shift. A single logical right shift divides a positive number by 2, discarding any remainders, for positive values.
The right shift (>>) operator returns the signed integer represented by the outcome of executing a sign-extending shift to the right by the number of bits provided in the second operand, modulo 32, of the binary representation of the first operand (evaluated as a two's complement bit string). The result will be 14 / 4 = 3 if I move the number 14 by two positions to the right. Since it's an integer, i.e. 14/4 = 3.5, the fractional component will not be taken into account. Generally speaking, the result of shifting a number n times to the right will equal number / (2n). The shift-bit expression's pattern is moved to the right by the amount supplied by additive-expression when using the right-shift operator.
To learn more about single logical click the link below:
brainly.com/question/28713173
#SPJ4
Which of the following cable types often includes a solid plastic core that keeps the twisted pairs separated?Cat 6Cat 3Cat 5eCat 5
The twisted pairs are kept apart in cat 6 cables by a solid plastic core, which also helps to prevent the cable from being bent too tightly.
Computer networks that can send data at speeds of one Gbps, 1000 Mbps, or more typically employ Cat 6 cables. The following traits apply: consists of four sets of copper wires, each of which is used in data transmission.
offers a speed of up to 10 Gbps, a bandwidth of 250 MHz, and a length that can be extended to 100 metres.
compares favourably to earlier twisted pair cable variants in terms of better crosstalk and attenuation protection.
Ethernet networks like 10BaseT, 100Base-TX, 1000 Base-T, and 10 GBase-T can use the Cat 6 cable.
Know more about Computer networks here:
https://brainly.com/question/13992507
#SPJ4
if you are designing a long-term retaining wall, which triaxial test should be used to determine the shear stress strength of the soil and why?
The soil's resistance to tangential (or shear) stress-induced deformation depends on its shear strength. More cohesion and friction or interlocking between the soil's particles will be present in soil with higher shear strength to stop the particles from sliding over one another. To determine bearing capacity and create retaining walls, slopes, and embankments, soil shear strength is used.
Deviatoric tension is elevated as a result (sigma 1 - sigma 3). The findings would point to a poorer soil (less shear strength than the actual shear strength of the soil). For any design project, it is essential for ground engineers to understand the shear strength of the soil. Everything that is constructed eventually comes into contact with the earth and transfers load there. The first stages in the design process are always to identify and measure the factors that affect a soil's strength. In this tutorial, we will first define and discuss the shear strength of soil and its significance before examining how groundwater and soil status affect shear strength of soil. We will then talk about soil shear strength tests and the method used to calculate them.
Learn more about shear strength here
https://brainly.com/question/22985582
#SPJ4
the program segment below is intended to move a robot in a grid to a gray square. the program segment uses the procedure goalreached, which evaluates to true if the robot is in the gray square and evaluates to false otherwise. the robot in each grid is represented as a triangle and is initially facing left. the robot can move into a white or gray square but cannot move into a black region. a 15-line code segment reads as follows. line 1: repeat until, open parenthesis, goal reached, open parenthesis close parenthesis, close parenthesis. line 2: open brace. line 3: if, open parenthesis, can underscore move, open parenthesis, forward, close parenthesis, close parenthesis. line 4: open brace. line 5: move underscore forward, open parenthesis close parenthesis. line 6: close brace. line 7: if, open parenthesis, can underscore move, open parenthesis, right, close parenthesis, close parenthesis. line 8: open brace. line 9: rotate underscore right, open parenthesis close parenthesis. line 10: close brace. line 11: if, open parenthesis, can underscore move, open parenthesis, left, close parenthesis, close parenthesis. line 12: open brace. line 13: rotate underscore right, open parenthesis close parenthesis. line 14: close brace. line 15: close brace. for which of the following grids does the program not correctly move the robot to the gray square?
The correct answer is Although the program will not move the robot to the gray square in Grid II, it will correctly move the robot to the gray square in Grid I. This option is correct.
A simulation enables exploration of a phenomena without the time, safety, or financial constraints of the actual world. Both the first value and the second value are true. These industrial robots have three prismatic joints that slide along three perpendicular axes to produce linear motion (X, Y and Z). In order to provide rotational movement, they could additionally include an attached wrist.While the programme is running, values are entered using the input statement.Robots that do not have servo motors are used to position and move items. This implies that these robots will be able to pick up, transfer, and then set down objects.
To learn more about gray square click the link below:
brainly.com/question/29172488
#SPJ4
Problem 1 (20 points) The beam
ABC
is subjected to a point load at the middle of segment
AB
and a uniformly distributed load at the segment
BC
, as shown in the figure. a) Find the equation of the elastic curve for the segment
AB
. b) Find the maximum absolute value of the deflection between the supports
A
and
B
c) Find the deflection at the middle of the segment
AB
d) Find the deflection at point C. Set
w 0 =3 N/m,L=2 m,EI=25000Nm^2
. Use the method of superposition for all parts. Hint: for
x>L/2
in segment
AB
, the solution can be obtained from the table by replacing
x
by
L−x
.
To solve this problem, use the superposition method, the total deflection at any point is the sum of the deflections due to the individual loads acting at that point.
a. we need to find the elastic curve equation for segment AB. This can be done by solving for beam deflection due to a point load in the middle of segment AB.
The beam deflection under a point load at distance x from the left support is given by
δ(x) = (w0x^2)/(24EI)
where w0 is the point load, E is the modulus of elasticity of the beam, and I is the moment of inertia of the beam.
Inserting the given value will result in:
δ(x) = (3x^2)/(2425000) = x^2/2000
This is the elastic curve equation for segment AB, as there is a point load in the middle of the segment. For part (b), we need to find the maximum absolute value of deflection between supports A and B. The deflection due to a point load is symmetrical about the midpoint of the segment, so the maximum absolute deflection occurs at the midpoint. Substituting x=L/2=1 into the equation for the elastic curve gives:
δ(x) = (1^2)/2000 = 0.0005m
This is the maximum absolute deflection between supports A and B.
In part (c) we need to find the deflection in the middle of segment AB. Substituting x=L/2=1 into the equation for the elastic curve gives:
δ(x) = (1^2)/2000 = 0.0005m
This is the deflection in the middle of segment AB. In part (d) we need to find the deflection at point C. To do this, solve for the beam deflection due to the evenly distributed load on segment BC and add it to the deflection due to the point load at the middle of segment AB.
b. The deflection of a beam under a uniformly distributed load w per unit length is given by
δ(x) = (wx^3)/(48EI)
Inserting the given value will result in:
δ(x) = (3x^3)/(4825000) = x^3/3200
This is the equation for the elastic curve of segment BC as the load is evenly distributed.
c. To find the deflection at point C, we need to substitute x=L=2 into the elastic curve equation. This will tell you:
δ(x) = (2^3)/3200 = 0.00125m
d. To find the total deflection at point C, the deflection due to the point load at the center of section AB must be added to the deflection due to the evenly distributed load in section BC. Substituting x=L/2=1 into the equation for elastic curve due to point load, we get:
δ(x) = (1^2)/2000 = 0.0005m
Learn more about this on brainly.com/question/1288793
#SPJ4
You are working as a security administrator. Your enterprise has asked you to choose an access control scheme in which a user is authorized to access the resources if the user has a specific attribute and denied if they don't.Which of the following access control schemes should you choose?
Answer: Attribute-based access control
The access control scheme that could be used in order to authorize a user if he has a specific attribute and denied if they don't, then the access control scheme will be a) attribute-based access control.
In the field of computers and technology, attribute-based access control can be described as a control feature in which those users are authorized for access if they have a particular attribute. On the other hand, such users that do not have the particular attribute will not be granted access.
When working as a security administrator, attribute-based access control can be formulated by the administrator if he wants to give authorized access to certain users.
Although a part of your question is missing, you might be referring to this question:
You are working as a security administrator. Your enterprise has asked you to choose an access control scheme in which a user is authorized to access the resources if the user has a specific attribute and denied if they don't. Which of the following access control schemes should you choose?
a) Rule-based access control
b) attribute-based access control
c) ethernet-based access control
d) none of the above
To learn more about administrator, click here:
https://brainly.com/question/26096799
#SPJ4
Neo-luddites argue that the technologies such as computers, automobiles, internet etc. are necessary and they have made significant improvement in our life.
TRUE OR FALSE
Neo-luddites argue that the technologies such as computers, automobiles, internet etc. are necessary and they have made significant improvement in our life. [FALSE]
What is Neo-LudditeA Neo-Luddite is someone who believes that the use of technology has serious ethical, moral, and social ramifications. Operating under this belief, Neo-Luddites are critical of technology and cautious to promote its early adoption. While they are not necessarily opposed to technology, they would prefer to see a more serious discussion of the role of technology in society. Some Neo-Luddites actually dislike technology, opting for a life of "voluntary simplicity," but this is not always the case.
The term "Luddite" comes from a political movement during the Industrial Revolution. The Luddites disliked the spread of mechanical devices such as mechanized looms to accomplish tasks which were formerly performed by people. They held marches, destroyed factories, and engaged in other types of activism in an attempt to prevent further technological development. Ultimately, the Luddites were unsuccessful, but when people started to question technology in large numbers again in the 1970s, they revived the concept, calling themselves the "New Luddites," and the Neo-Luddite movement was born.
t necessarily refer to themselves as Neo-Luddites, although some do. Instead, it is often used in a deprecating way by advocates of technology, to suggest that the thinking of Neo-Luddites is outdated and outmoded. The fantastic failure of the original Luddite movement is sometimes cited as an argument that opposition to technology is ultimately fruitless.
Learn more about Neo-luddites at https://brainly.com/question/29534867.
#SPJ4
which of the following dot matrix printer components converts impulses into physical movements that cause small hammers to strike the printhead?
A: An electromagnet component of the dot matrix printer converts impulses into physical movements causing small hammers to strike the printhead.
Dot matrix printers also known as impact printers function by physically striking the printhead to the print surface like an old-fashioned typewriter. An inked ribbon is put between the printhead and the surface and then an inked impression is left behind. On a dot matrix printer, an electromagnetic impulse enables a small hammer to create the strike. Whenever the printer obtains data for a print job, the logic board produces a series of electric impulses. An electromagnet then converts impulses into physical movements for small hammers to strike the printhead appropriately.
"
Complete question is:
which of the following dot matrix printer components converts impulses into physical movements that cause small hammers to strike the printhead?
A: electromagnet
B: dot
C: hammer
D: ink ribbon
"
You can learn more about dot matrix printer at
https://brainly.com/question/14551097
#SPJ4
engineers may issue subjective and partial statements if such statements are in writing and consistent with the best interests of their employers, clients, or the public..
A. True
B. False
The statement for engineers may issue subjective and partial statements if such statements are in writing and consistent with the best interest of their employers, clients, or the public is false.
Engineers is a profession that focus to solve technical problem or develop solution for the problem with applied science and mathematics theories and/or principles.
Science and mathematics theories and/or principles is based on the actual facts or objective. So, engineers must put objectivity in their work.
Engineers also objective and issue the full statement in order to give solution to their clients or public problem. If the statement is subjective or partial in any form including writing is wrong because it can't solve clients or public problem.
Learn more about engineers here:
brainly.com/question/7447774
#SPJ4
FILL IN THE BLANK. Limited slip differential ______ can result from clutch parts that are worn; in some cases, changing the limited slip lubricating oil fixes the problem.
Growling and Chattering are signs of worn clutch components; in certain cases, changing the limited slip lubrication oil resolves the issue.
What impact would a lubricant level that was too low possibly have?Low oil levels starve component surfaces of lubricant, resulting in fast wear and eventual machine failure. Metal-on-metal friction can cause shaft, housing, and other machine damage, making this failure one of the most expensive ones.
In a manual transmission, which of the following is utilized to shift?In contrast to automatics, which only have two, manuals feature three pedals. The farthest pedal to the left is the clutch pedal. When changing from one gear to the next, including neutral, you utilize it to shift up or down.
To know more about lubricating oil visit :-
https://brainly.com/question/19481124
#SPJ1
If the parent isotope has a half-life that equals 1.75 million years, how old is the rock?
Choose one:
A. 0.86 Ma
B. 5.25 Ma
C. 3.50 Ma
D. 3.06 Ma
E. 1.75 Ma
If the parent isotope has a half-life that equals 1.75 million years, The rocks is 1.75 Ma. old
What is meant by isotope ?Atoms that have different numbers of neutrons but the same number of protons are called isotopes. They differ in mass, which affects their physical characteristics even if they have nearly identical chemical properties.
The name "isotope" refers to the fact that different isotopes of a single element occupy the same location on the periodic table. The term "isotope" is derived from the Greek words isos ("equal") and topos ("place"), which together indicate "the same place."
Atoms with varied proton numbers but the same neutron number are referred to as isotones.
Two atoms are different elements if they have differing quantities of protons. However, two atoms are said to be isotopes if they contain the same number of protons but differing numbers of neutrons. The words atomic number and mass number are used to describe nuclides (isotopes).
To learn more about isotope refer to :
brainly.com/question/14220416
#SPJ4
Consider a Couette flow with a pressure gradient. A plate, located a distance H above a solid wall, is moving with a velocity Ve. Furthermore, a constant pressure gradient, (dp/dx), is imposed in the x direction. It can be assumed that the plate and the wall extend to infinity. Assume incompressible steady flow of a Newtonian fluid with a constant viscosity u and neglect gravity. у (a) Determine the velocity profile in the fluid. (List the Plate assumptions and simplifications you make, and clearly show ►U which ones are used to drop terms in the governing H equations.) X (b) Find the non-zero components of the viscous stress throughout the fluid. wall (c) At what value of the pressure gradient, (dp/dx)a, is the shear stress at the plate equal to zero? (d) At what value of the pressure gradient, (dp/dx)p, is the shear stress at the wall equal to zero? (e) Make a neat qualitative sketch of the velocity profile for each of the following cases: i. (dp/dx) = 0 ii. (dp/dx) = (dp/dx)a iii. (dp/dx) = (dp/dx)}
(a) The velocity profile in the fluid or u is:
[tex]$$u=U_e\left(\frac{y}{H}\right)+\frac{1}{2 \mu}\left(\frac{\partial P}{\partial x}\right)\left(y^2-H y\right)$$[/tex]
(b) The value of the pressure gradient for which the shear stress on the wall is equal to zero is:
[tex]& \frac{\partial P}{\partial x}=\frac{-U_\theta \mu}{H\left(y-\frac{H}{2}\right)}\end{aligned}$$[/tex]
What is pressure gradient?The pressure gradient, which is a physical quantity used in atmospheric science to describe the direction and rate at which pressure rises most quickly around a specific location, is typically defined as being of air, but it can also more broadly refer to any fluid.
Pascals per meter (Pa/m) is a dimensional unit used to express the pressure gradient. The gradient of pressure as a function of position is what it is mathematically referred to as. The force density is the name for the negative gradient of pressure.
Pressure gradients in petroleum geology and petrochemical sciences pertaining to oil wells, and more specifically in hydrostatics, refer to the gradient of vertical pressure in a column of fluid within a wellbore and are typically expressed in pounds per square inch per foot (psi/ft).
Learn more about Pressure gradients
https://brainly.com/question/13383197
#SPJ4
an electrical load operates at 240 volts (rms). it absorbs an average power of 8kw at a lagging power factor of 0.8 (current lags voltage) calculate the complex power of the load calculate the impedance of the load, z
The impedance of the load 9.6 ohms. The complex power of the load is infinity.
The concept of complex power is important in bbecause it allows engineers to analyze the power flow in an AC electrical circuit, which is necessary for the design and operation of electrical power systems. It is also used in the analysis and optimization of power factor in electrical circuits.
The complex power of the load can be calculated using the following formula:
S = P + jQ
where P is the real power in watts, Q is the reactive power in volt-amperes reactive (VAR), and j is the imaginary unit.
To calculate the complex power of the load, we first need to calculate the reactive power. The reactive power can be calculated using the following formula:
Q = P x tan(θ)
where θ is the phase angle between the voltage and current. In this case, the phase angle is the angle between the voltage and the lagging current, which is 90 degrees. Therefore, the reactive power is:
Q = 8 kW x tan(90) = 8 kW x ∞ = ∞
The complex power of the load is then:
S = 8 kW + j x ∞
The impedance of the load can be calculated using the following formula:
Z = V / I
where V is the voltage and I is the current. In this case, the voltage is 240 volts and the current is:
I = P / (V x PF)
where P is the real power and PF is the power factor. Substituting the values, we get:
I = 8 kW / (240 V x 0.8) = 25 A
The impedance of the load is then:
Z = 240 V / 25 A = 9.6 ohms
Learn more about complex power, here https://brainly.com/question/2355649
#SPJ4