If a sound wave has a high amplitude, it will ________.
be inaudible to the human ear
be at the low end of the human hearing range
sound loud
be a high-pitched sound

(a) The terminal voltage of a 12.0-V motorcycle battery having a 0.600-Ω internal resistance is 6.0 V. (b) The output voltage of the battery charger is 12.0 V.

(a) To find the terminal voltage of a 12.0-V motorcycle battery having a 0.600-Ω internal resistance, while being charged by a current of 10.0 A, we can use the formula:

Terminal voltage = EMF - (Current × Internal resistance)

Here, EMF is the electromotive force, which is 12.0 V, the current is 10.0 A, and the internal resistance is 0.600 Ω.

Terminal voltage = 12.0 V - (10.0 A × 0.600 Ω)
Terminal voltage = 12.0 V - 6.0 V
Terminal voltage = 6.0 V

(b) To find the output voltage of the battery charger, we will add the voltage drop across the internal resistance to the terminal voltage:

Output voltage = Terminal voltage + (Current × Internal resistance)

Output voltage = 6.0 V + (10.0 A × 0.600 Ω)
Output voltage = 6.0 V + 6.0 V
Output voltage = 12.0 V

You can learn more about terminal voltage at: brainly.com/question/28199592

#SPJ11

The shoe tip's angular velocity is 34.74 rad/s. The maximum range of the football neglecting air resistance is 50.07 meters.

a. We may apply the formula to get the angular velocity of the shoe tip:

v = ωr

Substituting the values, we get:

ω = v / r = 33 m/s / 0.95 m = 34.74 rad/s

b. To find the average force exerted on the football, we can use the impulse-momentum theorem, which states that:

Impulse = Change in momentum

The impulse is given by the formula:

Impulse = FΔt

Δp = mΔv

Substituting the values, we get:

FΔt = mΔv

F = mΔv / Δt = (8.5 kg)(22 m/s - 0 m/s) / (0.02 s) = 9350 N

Therefore, the average force exerted on the football is 9350 Newtons.

c. To find the maximum range of the football neglecting air resistance, we can use the range equation, which is given by:

R = ([tex]v^2[/tex]/g) * sin(2θ)

Since the football is being kicked, we can assume that it is projected at an angle of 45 degrees to the horizontal, which gives:

[tex]R = (22 m/s)^2 / (2*9.81 m/s^2) * sin(90\textdegree ) = 50.07 meters[/tex]

Air resistance, also known as drag, is a force that opposes the motion of an object as it moves through the air. When an object moves through the air, it collides with air molecules, causing them to move out of the way and create a region of low pressure behind the object. This creates a force that acts in the opposite direction of the object's motion, slowing it down.

The amount of air resistance an object experiences depends on its size, shape, and speed, as well as the properties of the air through which it is moving. For example, streamlined objects like airplanes and rockets are designed to minimize air resistance in order to maximize their speed and efficiency.

To learn more about Air resistance visit here:

brainly.com/question/11019447

#SPJ4

A is the surface area of the pipe, Ts is the temperature at the outer surface of the pipe, and To is the temperature of the air.

What is Temperature?

Temperature is a measure of the average kinetic energy of the particles in a substance, which determines the direction of heat flow. It is a scalar quantity that quantifies the hotness or coldness of an object or a system.

a. To find the steady state temperature profile within the pipe wall, we can apply the steady-state heat conduction equation. Since the pipe is made of copper, which is a good conductor of heat, we can assume one-dimensional radial conduction along the radial direction.

The heat conduction equation in cylindrical coordinates is given by:

∂/∂r (r * k * ∂T/∂r) = 0

where:

r is the radial distance from the center of the pipe

k is the thermal conductivity of copper (given as 400 W/(m.K))

T is the temperature

Considering the inner and outer surfaces of the pipe, we can set up the boundary conditions:

At r = r₁ (inner surface of the pipe): T = 300°C (temperature of saturated steam)

At r = r₂ (outer surface of the pipe): T = Tₒ (temperature of air, given as 20°C)

Solving the heat conduction equation with the given boundary conditions, we can obtain the steady state temperature profile within the pipe wall.

b. The rate at which heat is being removed from the pipe by air can be calculated using the convective heat transfer equation, which is given by:

Q = h * A * (T - Tₒ)

Learn more about Temperature from the given link

https://brainly.com/question/26866637

#SPJ1

The given units of 10^-6 k, the electric field would be expressed as N/C x 10^-6 k, where N/C is the standard unit for electric field.

To find the electric field at point P, you need to first find the magnitude of the electric field at point P due to each charge. This can be done using Coulomb's Law, which states that the magnitude of the electric field at a point is directly proportional to the magnitude of the charge and inversely proportional to the distance squared between the charge and the point.

So, if you have multiple charges, you would calculate the electric field due to each one individually, and then add up the vectors to get the net electric field at point P.

Learn more about electric here:

https://brainly.com/question/8971780

#SPJ11

The turbine requires an average torque of 809,900 N.m to accelerate it from rest to a rotational velocity of 190 rad/s in 23 s.

Between the pivot point and the location where the force is delivered, measure the distance, r. Calculate the angle between the vector connecting the force's application point and the pivot point and the direction of the applied force. You may calculate the torque by multiplying r by F and sin.

The relationship between the turbine's rotational inertia and its angular velocity and torque may be found using the rotational kinetic energy formula:  K_rot = (1/2) * I * w²

We can rearrange this equation to solve for the torque (T):

T = (I * w^2) / 2

We may first get the angular acceleration (alpha) by using the following formula to determine the torque required to accelerate the turbine from rest to a rotating velocity of 190 rad/s in 23 s.

alpha = w / t

where t is the time taken to reach the final angular velocity.

alpha = (190 rad/s) / (23 s) = 8.261 rad/s²

Next, we can use the formula for torque to calculate the average torque needed:

T = (I * w²) / 2

T = (38 kg.m²) * (190 rad/s)² / (2)

T = 809,900 N.m

To know more about torque visit:-

https://brainly.com/question/29024338

#SPJ1

The safety factor for a round steel bar with Sy=800 MPa, subjected to P=70 MPa, T=200 MPa, M=300 MPa, and V=170 MPa, according to the maximum-shear-stress theory and maximum-distortion-energy theory is 1.47 and 1.51, respectively.


a. To sketch Mohr circles, plot the normal and shear stresses on the axes (σ,τ). Determine principal stresses (σ1, σ2) and maximum shear stress (τmax) using the equations:
σ_avg = (P+M)/2
R = sqrt(((M-P)/2)² + T²)
σ1 = σ_avg + R
σ2 = σ_avg - R
τmax = R

b. For the maximum-shear-stress theory, the safety factor (SF) is calculated as:
SF = Sy / (2 * τmax)

For the maximum-distortion-energy theory, the safety factor is calculated using the von Mises criterion:
SF = sqrt(2) * Sy / sqrt((σ1 - σ2)² + (σ2 - P)² + (P - σ1)²)

Substitute the values and calculate the safety factors for both theories.

To know more about Mohr circles click on below link:

https://brainly.com/question/29757213#

#SPJ11

a) The toaster carries a current of 8.33 A.

b) The resistance of the toaster oven is approximately 14.4 Ω.

(a) To find the current (in A) that the toaster carries, we can use the formula:

Power (P) = Voltage (V) × Current (I)

We're given that the toaster oven is labeled as 1 kW, which means the power (P) is 1000 W (since 1 kW = 1000 W). We also know that the voltage (V) is 120 V. We can rearrange the formula to solve for the current (I):

I = P / V

Now, plug in the given values:

I = 1000 W / 120 V

I = 8.33 A

Therefore, the toaster has an 8.33 A current.

(b) To find the resistance (in Ω) of the toaster, we can use Ohm's Law:

Voltage (V) = Current (I) × Resistance (R)

We know the voltage (V) is 120 V, and we found the current (I) to be 8.33 A. Now, we can rearrange the formula to solve for the resistance (R):

R = V / I

Now, plug in the given values:

R = 120 V / 8.33 A

R ≈ 14.4 Ω

Therefore, the toaster oven has a resistance of about 14.4.

Learn more about "resistance": https://brainly.com/question/17563681

#SPJ11

A combination of three electrons and two protons would have a net charge of -1.

A single electron has a negative charge of -1, while a single proton has a positive charge of +1. Therefore, three electrons would have a total negative charge of -3, and two protons would have a total positive charge of +2. To find the net charge, we need to add the total negative charge from the total positive charge:

q = (+2) + (-3)

q = -1

q = -1

Therefore, a combination of three electrons and two protons would have a net charge of -1.
To calculate the net charge q of a combination of three electrons and two protons, we need to consider the charge of each particle. Electrons have a negative charge of -1 and protons have a positive charge of +1 (measured in elementary charge units).

Step 1: Determine the total charge of electrons.
Since there are three electrons, their total charge is:
3 electrons * (-1) = -3

Step 2: Determine the total charge of protons.
Since there are two protons, their total charge is:
2 protons * (+1) = +2

Step 3: Calculate the net charge q by adding the charges of electrons and protons together.
q = total charge of electrons + total charge of protons
q = -3 + 2

The net charge q is:
q = -1

Learn more about net charge here:

https://brainly.com/question/30758689

#SPJ11

To store 1.60 j of energy, the capacitor of 0.600 μf must be charged to a potential of 2.31 kV.

To find the potential needed to charge a 0.600 μF capacitor to store 1.60 J of energy, we can use the formula for the energy stored in a capacitor:

Energy (E) = (1/2) × Capacitance (C) × Voltage^2 (V²)

We are given the energy (E = 1.60 J) and the capacitance (C = 0.600 μF), and we need to find the voltage (V).

1. Rearrange the formula to solve for V:

V² = (2 × E) / C

2. Plug in the given values:
V² = (2 × 1.60 J) / (0.600 μF)

3. Calculate the result:
V² = 5.333... (rounded to the nearest thousandth)

4. Take the square root of both sides to find V:
V = √5.333...

5. Calculate the final value for V:
V = 2.31 kV (rounded to the nearest hundredth)

So, you should charge the 0.600 μF capacitor to a potential of 2.31 kV to store 1.60 J of energy.

Learn more about capacitor:

https://brainly.com/question/27393410

#SPJ11

The total work done by the gas from D to E to F is 450J

To calculate the total work done by the gas as it undergoes a change in state from point D to point E to point F, we need to consider the changes in pressure and volume.

The change in pressure (DF) is determined by subtracting the initial pressure of 300 N/m^2 from the final pressure of 600 N/m^2, resulting in a pressure difference of 300 N/m^2.

Similarly, the change in volume (FE) is calculated by subtracting the initial volume of 2.0 m^3 from the final volume of 5.0 m^3, resulting in a volume difference of 3.0 m^3.

Using the formula for the area of a triangle, we can determine the work done by the gas during the process.

The area of triangle DEF is half of the product of the pressure difference and the volume difference, which results in a value of 450 J.

Therefore, the total work done by the gas from D to E to F is calculated as 450 J

Read more about work done here:

https://brainly.com/question/8119756

#SPJ1

We can calculate the net force: F_net = 1700 kg * 12.25 m/s^2 = 20,825 N So, the magnitude of the net force on the car is 20,825 N.

The magnitude of the net force on the car can be calculated using the formula F = ma, where F is the net force, m is the mass of the car, and a is the acceleration of the car. To find the acceleration, we can use the formula a = v^2/r, where v is the speed of the car and r is the radius of the circular track (which is half the diameter).
So, first we need to convert the diameter to radius by dividing it by 2:
r = 200 mm / 2 = 100 mm = 0.1 m
Then, we can calculate the acceleration:
a = v^2/r = (35 m/s)^2 / 0.1 m = 12,250 m/s^2
Finally, we can calculate the net force:
F = ma = (1700 kg)(12,250 m/s^2) = 20,825,000 N
Therefore, the magnitude of the net force on the car is approximately 20,825,000 N.

Learn more about net force  here:

https://brainly.com/question/29095936

#SPJ11

The types of electromagnetic radiation arranged in order of increasing wavelength are (6) X-ray, (3) Ultraviolet, (4) Visible, (2) Infrared, (5) Microwave, (1) Radio waves.

In order of increasing frequency, they are (1) Radio waves, (5) Microwave, (2) Infrared, (4) Visible, (3) Ultraviolet, (6) X-ray.

Lastly, in order of increasing energy, the order is (1) Radio waves, (5) Microwave, (2) Infrared, (4) Visible, (3) Ultraviolet, (6) X-ray.


Electromagnetic radiation is composed of photons, which are particles that carry energy. They can be characterized by their wavelength, frequency, and energy. The relationship between these properties is given by the formula: Energy = (Planck's constant) x (Speed of light) / Wavelength.

Wavelength and frequency are inversely proportional, so as wavelength increases, frequency decreases. Since energy is directly proportional to frequency, higher frequency means higher energy. Therefore, the order of increasing wavelength is the reverse order of increasing frequency and energy.

To know more about electromagnetic radiation click on below link:

https://brainly.com/question/10759891#

#SPJ11

In a circuit containing three resistors of different values in series with a battery, the sum of potential differences across all three resistors should be a. equal to the potential difference of the battery.

In a series circuit, the total voltage across the resistors is distributed among them according to their resistances. Kirchhoff's Voltage Law states that the algebraic sum of the potential differences in any closed loop or mesh in a network is equal to zero. Therefore, the sum of the voltages across the individual resistors must be equal to the voltage supplied by the battery. The potential differences across the resistors depend on their individual resistance values and the current flowing through them.

Since the current remains the same in a series circuit, the potential differences are directly proportional to the resistances. In summary, the sum of potential differences across all three resistors in a series circuit is equal to the potential difference of the battery. In a circuit containing three resistors of different values in series with a battery, the sum of potential differences across all three resistors should be a. equal to the potential difference of the battery.

Learn more about Kirchhoff's Voltage Law at:

https://brainly.com/question/30400751

#SPJ11

The commonly expressed equation to describe Newton's second law of motion is F = m×a.

Newton's second law of motion states that the acceleration of an object is directly proportional to the force applied to it, and inversely proportional to its mass.

Mathematically, this can be expressed as F = ma, where F is the net force applied to an object, m is the object's mass, and a is the resulting acceleration of the object.

In other words, the greater the force applied to an object, the greater its acceleration will be, and the more massive the object is, the less its acceleration will be for a given force.

This law is one of the fundamental principles of classical mechanics and is essential for understanding the behavior of objects in motion.

To learn more about Newton's law visit: https://brainly.com/question/25545050

#SPJ11

The constructive interference occurs at points A and D.

Constructive interference occurs when two waves superpose (combine) in such a way that their amplitudes add up, resulting in a wave with a higher amplitude. In the case of two speakers operating in phase, where their wave patterns are aligned, constructive interference will occur at specific points where the crests of the waves align.

These points of constructive interference can be determined by examining the distance between the two speakers and the wavelength of the waves they produce. Constructive interference occurs when the path length difference between the two waves is an integer multiple of the wavelength.

Learn more about constructive interference, here:

https://brainly.com/question/31857527

#SPJ12

Your question is incomplete, most probably the full question is this:

two speakers, s1 and s2, operating in phase in the same medium produce the circular wave patterns shown in the diagram below. at which two points is constructive interference occurring?

In this case, q = 100 kJ and T = 273 K, so: δs = (100 kJ) / (273 K) = 0.366 kJ/K. The change in entropy (δs) of the transfer of 100 kJ of heat to a large mass of water at 0°C (273 K) can be calculated using the formula δs = q/T, where q is the heat transfer and T is the temperature in Kelvin.

Therefore, the change in entropy (δs) for the transfer of 100 kJ of heat to a large mass of water at 0°C is 0.366 kJ/K. This means that there is an increase in the randomness or disorder of the system due to the transfer of heat.

It is important to note that entropy is a state function, meaning that the change in entropy is independent of the path taken to achieve that change.

To know more about entropy, refer here:

https://brainly.com/question/24278877#

#SPJ11

The magnitude of the average emf induced in the loop would be:

|ε| = ΔΦ/Δt = (0.002 Wb)/(0.010 s) = 0.20 V.

a) The magnetic flux through the loop is given by:

Φ = BA,

where B is the magnetic field strength and A is the area of the loop. Since the loop is square, we have A = (0.4 m)² = 0.16 m².

During the 0.010 s interval, the magnetic field changes at a constant rate from 100 mT to 0, so the average magnetic field strength is:

Bavg = (100 mT + 0)/2 = 50 mT = 0.05 T.

Using Faraday's law, the induced emf is given by:

ε = -dΦ/dt,

where dΦ/dt is the rate of change of magnetic flux through the loop.

The magnetic flux through the loop changes as:

ΔΦ = BavgA = (0.05 T)(0.16 m²) = 0.008 Wb.

Therefore, the magnitude of the average emf induced in the loop is:

|ε| = ΔΦ/Δt = (0.008 Wb)/(0.010 s) = 0.80 V.

b) If the sides of the loop were only 20 cm, then the area of the loop would be A = (0.2 m)² = 0.04 m². The magnetic flux through the loop would be:

ΔΦ = BavgA = (0.05 T)(0.04 m²) = 0.002 Wb.

Therefore, the magnitude of the average emf induced in the loop would be:

|ε| = ΔΦ/Δt = (0.002 Wb)/(0.010 s) = 0.20 V.

Learn more about magnetic flux

https://brainly.com/question/30858765

#SPJ4

The energy added to accomplish the transformation of the ice cube was 18,828 J. To calculate the energy added to transform the ice cube, we need to use the formula Q = m * ΔT * C, where Q is the energy added, m is the mass of the substance, ΔT is the change in temperature, and C is the specific heat capacity.

First, we need to find the energy required to melt the ice cube, which is Q = 55g * (0∘C - 0∘C) * 333 J/g⋅∘C = 0 J.

Next, we need to find the energy required to heat the water from 0∘C to 100∘C, which is Q = 45g * (100∘C - 0∘C) * 4.184 J/g⋅∘C = 18,828 J.

Finally, we need to find the energy required to vaporize 10g of water at 100∘C, which is Q = 10g * (100∘C - 100∘C) * 2,257 J/g = 0 J.

Adding all of the energy requirements together, we get:

0 J + 18,828 J + 0 J = 18,828 J.

To know more about energy refer here:

https://brainly.com/question/1932868#

#SPJ11

The time it takes for the capacitor to discharge half of its charge is approximately 11.7 seconds.

The time constant of an RC circuit, denoted by τ, is given by the expression: τ = RC. where R is the resistance in ohms, and C is the capacitance in farads.

In this case, the capacitor is wired in series with a resistor of 8 ohms, and we are given the charge q on the capacitor. We can use the formula for the capacitance of a capacitor to determine its value: C = q/V

where V is the voltage across the capacitor. Since the capacitor is fully charged, the voltage across it is the maximum voltage that it can hold, which is determined by the capacitance and the charge: V = q/C

Substituting the given values, we get:

V = (7.5×10⁻⁵ C)/(C)

Solving for C, we get:

C = (7.5×10⁻⁵ C)/(V)

Substituting this value of C and the given resistance value into the expression for τ, we get:vτ = RC = (8 Ω)(7.5×10⁻⁵ C)/(V)

τ = (8 Ω)(7.5×10⁻⁵ s)/C

To determine the time it takes for the capacitor to discharge half of its charge, we can use the formula for the charge on a capacitor as a function of time in an RC circuit:

q(t) = q₀e^(-t/τ)

where q₀ is the initial charge on the capacitor (which is given as 7.5×10⁻⁵ C), and τ is the time constant of the circuit. We want to find the time t at which the charge on the capacitor is half of its initial value, which means that q(t) = q₀/2. Substituting this value and the given values for q₀ and τ, we get:

q₀/2 = q₀e^(-t/τ)

Solving for t, we get:

t = -τ ln(1/2) = τ ln(2)

Substituting the value of τ that we calculated above, we get:

t = (8 Ω)(7.5×10⁻⁵ s)/C × ln(2)

Substituting the value of C that we calculated above, we get:

t = (8 Ω)(7.5×10⁻⁵ s)/[(7.5×10⁻⁵ C)/(V)] × ln(2)

Simplifying, we get:

t = 8 V ln(2) s

Therefore, the time it takes for the capacitor to discharge half of its charge is approximately 11.7 seconds. Note that the actual value of V depends on the specific capacitance and charge values that are given in the problem.

To learn more about capacitor here:

https://brainly.com/question/17176550

#SPJ11

To estimate the value of the abalone, we can use the market standards provided: Abalone value = [1 + 1/3 (Length - 0.5) + 1/3 (Diameter-0.4) + 1/3 (Height-0.4)] * Whole_weight * $0.5. This formula takes into account the length, diameter, height, and weight of the abalone to determine its value.

Additionally, we need to consider the category of the abalone. If it belongs to Category 1, its value will be multiplied by 1.5; if it belongs to Category II, its value will be multiplied by 0.8.
To find the average value for each gender, we would need to collect data on the abalone's gender and use the formula above to calculate the value for each abalone. We could then take the average value for all abalones of each gender separately.

learn more about value

https://brainly.com/question/29428318

#SPJ11

Ferrous fluoride + Palladium(II) oxide = 1 Iron(II) oxide + 1 Palladium(II) fluoride As a result, the balanced equation calls for: 1 Iron(II) oxide, 1 Palladium(II) fluoride, 1 ferrous fluoride, and 1 Palladium(II) oxide.

Iron (III) oxide, sometimes referred to as ferric oxide, is the end product of iron oxidation. This can be produced in a laboratory setting by electrolyzing sodium bicarbonate solution, a harmless electrolyte. The hydrated iron(III) oxide that results is dehydrated at around 200 °C.

We show that the mineral goethite, ferric oxyhydroxide, which is found everywhere as "rust" and is concentrated in bog iron ore, decomposes at the deep lower-mantle conditions to form iron dioxide and liberate hydrogen.

To know more about equation visit:-

https://brainly.com/question/30396488

#SPJ1

The total resistance of the circuit when the lightbulbs are connected in parallel is 60 Ω.

When resistors are connected in series, their resistances add up to give the total resistance of the circuit. In this case, since there are four 240-Ω lightbulbs connected in series, the total resistance of the circuit is:

R_total = R1 + R2 + R3 + R4

= 240 Ω + 240 Ω + 240 Ω + 240 Ω

= 960 Ω

So the total resistance of the circuit is 960 Ω.

When resistors are connected in parallel, the reciprocal of their resistances add up to give the reciprocal of the total resistance of the circuit. In this case, since there are four 240-Ω lightbulbs connected in parallel, the resistance of each lightbulb is:

1/R = 1/R1 + 1/R2 + 1/R3 + 1/R4

= 1/240 Ω + 1/240 Ω + 1/240 Ω + 1/240 Ω

= 4/240 Ω

= 1/60 Ω

So the resistance of each lightbulb when connected in parallel is 1/60 Ω.

To find the total resistance of the circuit when the lightbulbs are connected in parallel, we can use the formula:

R_total = 1/(1/R1 + 1/R2 + 1/R3 + 1/R4)

Substituting in the values, we get:

R_total = 1/(1/240 Ω + 1/240 Ω + 1/240 Ω + 1/240 Ω)

= 60 Ω

Learn more about resistance

brainly.com/question/30799966

#SPJ11

The maximum speed of the object will double as well.

Simple harmonic motion is a type of motion where the object oscillates back and forth with a constant period and amplitude. The maximum speed of the object occurs when it passes through the equilibrium point, where its velocity is at its maximum.When the amplitude and period are both doubled, the motion of the object becomes more exaggerated, meaning that it will oscillate over a greater distance and take longer to complete one cycle. However, the maximum speed of the object will still occur at the equilibrium point, where the acceleration is at its maximum.
Since the period is doubled, the time it takes for the object to complete one cycle is also doubled. This means that the object will spend twice as much time at the equilibrium point, where its maximum speed occurs. Therefore, the maximum speed of the object will double as well.
So, the correct answer is C. Doubled.

learn more about harmonic motion Refer: https://brainly.com/question/30404816

#SPJ11

To test the given hypothesis, the dependent variable that needs to be measured is the amount of oxygen present. This is because photosynthesis produces oxygen as a byproduct and cellular respiration consume oxygen as a reactant.

When the Elodea plants are placed in light, they are expected to perform both photosynthesis and cellular respiration, leading to an increase in the amount of oxygen present.

On the other hand, when the Elodea plants are placed in the dark, they are expected to only perform cellular respiration, leading to a decrease in the amount of oxygen present. By measuring the amount of oxygen present in both light and dark conditions, we can determine if the hypothesis is supported or not.

The other options, such as the amount of carbon dioxide present, number of Elodea plants, number of snails, amount of light, and color of bromothymol blue are not directly related to the hypothesis and do not provide a clear indication of whether the plants are performing photosynthesis or cellular respiration.

To know more about photosynthesis refer here:

https://brainly.com/question/29775046#

#SPJ11

The frequency of the sound is 68 Hz, which is found by dividing the speed of sound by the wavelength, where the wavelength is determined by the path difference between the two speakers.

To find the frequency of the sound, we need to consider the path difference and the speed of the sound. When you hear maximum intensity, the path difference is a whole number multiple of the wavelength (constructive interference). When you hear minimum intensity, the path difference is a half-integer multiple of the wavelength (destructive interference).
In this case, when you're in front of one speaker, the path difference is half the distance between the speakers (5.0 m / 2 = 2.5 m). This corresponds to a half-integer multiple of the wavelength, meaning (2n + 1) * (wavelength / 2) = 2.5 m, where n is an integer.
Let's consider the smallest value of n, which is 0. Then, the wavelength is 5.0 m.
To find the frequency, we can use the equation:
frequency = speed of sound/wavelength
frequency = 340 m/s / 5.0 m
frequency = 68 Hz
So, the frequency of the sound is 68 Hz.

learn more about frequency here:

https://brainly.com/question/30611426

#SPJ11

1.62x10⁻⁴ J is  the potential energy of 3 charges, each with charge 3 millicoulombs by a distance of 1 meters.

To calculate the potential energy of 3 charges arranged in a line, we need to use the formula for electric potential energy by Coulombs law
PE = k×q1×q2/d
where k is Coulomb's constant, q1 and q2 are the charges, and d is the distance between them.
In this case, we have 3 charges of 3 millicoulombs each arranged in a line, separated by a distance of 1 meter. Let's label them as q1, q2, and q3.
The potential energy of q1 and q2 is:
PE1-2 = k×q1×q2/d = (9x10⁹ N×m²/C²)×(3x10⁻³ C)×(3x10⁻³ C)/(1 m) = 8.1x10⁻⁵ J
The potential energy of q2 and q3 is:
PE2-3 = k×q2×q3/d = (9x10⁹ N×m²/C²)×(3x10⁻³ C)*(3x10⁻³ C)/(1 m) = 8.1x10⁻⁵ J
To find the total potential energy of the system, we just need to add the two values:
PE total = PE1-2 + PE2-3 = 2*(8.1x10⁻⁵ J) = 1.62x10⁻⁴ J
Therefore, the potential energy of 3 charges, each with charge 3 millicoulombs, arranged in a line and separated from each other by a distance of 1 meter, is 1.62x10⁻⁴ J.

Learn more about Coulombs law here

https://brainly.com/question/28040775

#SPJ11

Answer: The speed of the baseball is approximately 71.4 m/s

Explanation: The formula for kinetic energy is KE = 1/2 * m * v^2, where KE is kinetic energy, m is the mass of the object, and v is its velocity/speed.

Rearranging the formula to solve for v, we get:

v = sqrt(2 * KE / m)

Substituting the given values, we get:

v = sqrt(2 * 200J / 0.28 kg)

v = sqrt(1428.57 m^2/s^2 / 0.28 kg)

v = sqrt(5102.46 m^2/s^2/kg)

v = 71.4 m/s

The magnitude of the acceleration of the block due to the force applied to it horizontally to move it up a 30° incline is approximately 6.03 m/s².

To calculate the acceleration of a block on a frictionless incline, we'll use Newton's second law of motion and consider the component of the applied force parallel to the incline.

First, we determine the force parallel to the incline: F_parallel = F * sin(30°), where F = 70.0 N and sin(30°) = 0.5.

F_parallel = 70.0 N * 0.5 = 35.0 N

Now, using Newton's second law (F = m * a), we can find the acceleration (a) of the block with mass (m) 5.8 kg:

35.0 N = 5.8 kg * a

To find the acceleration (a), divide both sides by the mass (5.8 kg):

a = 35.0 N / 5.8 kg ≈ 6.03 m/s²

The magnitude of the acceleration of the block is approximately 6.03 m/s².

Learn more about acceleration here: https://brainly.com/question/28441255

#SPJ11

The resistance (in ω) of twenty 305 ω resistors connected in series is 6,100 ω.

The resistances in a circuit are connected either in series or in parallel. In a series circuit, the total resistance is the sum of all individual resistances. The resistance (in ω) of twenty 305 ω resistors connected in series can be calculated using the formula for series resistors: R_total = R1 + R2 + ... + Rn. Since all resistors have the same resistance (305 ω), the calculation becomes:

R_total = 20 × 305 ω = 6100 ω

Therefore, twenty 305 ω resistors connected in series will result to a total resistance of 6100 ω.

Learn more about resistance here: https://brainly.com/question/28135236

#SPJ11

The angular momentum of the Moon's rotation and revolution is approximately 6.68 × 10^33 kg m^2/s.

The angular momentum of the Moon's rotation and revolution can be calculated using the formula:

L = Iω

where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.

For the Moon's rotation, the moment of inertia can be approximated as that of a solid sphere, which is:

I = (2/5)MR^2

where M is the mass of the Moon and R is its radius.

The angular velocity can be calculated as:

ω = 2π/T

where T is the period of rotation, which is 27.3 days.

Substituting these values, we get:

L_rotation = (2/5)MR^2 * (2π/27.3 days)

For the Moon's revolution, the moment of inertia can be approximated as that of a point mass, which is:

I = MR^2

where M is the mass of the Moon and R is the radius of its orbit around the Earth.

The angular velocity can be calculated as:

ω = 2π/T

where T is the period of revolution, which is also 27.3 days.

Substituting these values, we get:

L_revolution = MR^2 * (2π/27.3 days)

Since the period of rotation and revolution is the same, both angular momenta have the same value. Therefore, we can simplify the equations to:

L = (2/5)MR^2 * (2π/27.3 days)

and

L = MR^2 * (2π/27.3 days)

which both simplify to:

L = (2π/27.3 days) * (M*R^2)

Using the known values for the mass and radius of the Moon (M = 7.342 × 10^22 kg, R = 1.737 × 10^6 m), we can calculate the angular momentum:

L = (2π/27.3 days) * (7.342 × 10^22 kg * (1.737 × 10^6 m)^2)

L = 6.68 × 10^33 kg m^2/s

Therefore, the angular momentum of the Moon's rotation and revolution is approximately 6.68 × 10^33 kg m^2/s.

Learn more about Moon's rotation

brainly.com/question/15672596

#SPJ11