Identify the orbital containing the electron removed in each ionization. Enter a subshell designation, such as 3p or 5s.
a. 1st
b. 2nd
c. 3rd

Answer:

both are done due to the enviroment??

Answer:

sound waves in air and water are longitudinal. Their disturbances are periodic variations in pressure that are transmitted in fluids. Figure 13.5 the wave on a guitar string is transverse

Answer:

/dɪˈmɒkrəsi/

--noun--

A system of government by the whole population or all the eligible members of a state, typically through elected representatives.

13.1 g of KBr is required to produce 429.5 mL of a 0.256 M solution of KBr.

To calculate the mass of solute required to produce 429.5 mL of a 0.256 M solution of KBr, we can use the formula below;

Mass of solute = Molarity × Volume (liters) × Molecular weight of solute

We can also convert the volume of the solution from milliliters to liters by dividing by 1000.

Thus,429.5 mL = 429.5/1000 = 0.4295 Liters

Therefore,

Mass of KBr required = Molarity × Volume × Molecular weight of KBr= 0.256 mol/L × 0.4295 L × 119 g/mol= 13.1 g KBr

Thus, 13.1 g of KBr is required to produce 429.5 mL of a 0.256 M solution of KBr.

Learn more about Molarity here:

https://brainly.com/question/31545539

#SPJ11

Answer:

Respiration in plants: The process of respiration in plants involves using the sugars produced during photosynthesis plus oxygen to produce energy for plant growth. In many ways, respiration is the opposite of photosynthesis. ... As with photosynthesis, plants get oxygen from the air through the stomata.

Transpiration in plants: The water eventually is released to the atmosphere as vapour via the plant's stomata — tiny, closeable, pore-like structures on the surfaces of leaves. Overall, this uptake of water at the roots, transport of water through plant tissues, and release of vapour by leaves is known as transpiration.

Sources (jic)

https://www.usgs.gov/special-topic/water-science-school/science/evapotranspiration-and-water-cycle

https://www.pthorticulture.com/en/training-center/basics-of-plant-respiration/

Good luck!!

The answer is 0.015295197308045

We assume you are converting between moles Zinc and gram. You can view more details on each measurement unit: molecular weight of Zinc or grams The molecular formula for Zinc is Zn

The number of hydrogen atoms required to convert all of the oxygen atoms into nitric acid is 6000.

One molecule of nitric acid has a formula of HNO3, containing one nitrogen atom, one hydrogen atom, and three oxygen atoms. Therefore, if there are 6000 nitrogen atoms and 6000 oxygen atoms present, this means that there are 6000/3 = 2000 nitric acid molecules. Each nitric acid molecule has one hydrogen atom. Therefore, to convert all 6000 oxygen atoms into nitric acid, we need 3 times as many hydrogen atoms, which is 3 x 2000 = 6000 hydrogen atoms. This is because each molecule of nitric acid requires three oxygen atoms and one hydrogen atom.So, the number of hydrogen atoms required to convert all of the oxygen atoms into nitric acid is 6000.

To know more about hydrogen visit:

https://brainly.com/question/30623765

#SPJ11

The Kb expression for the reaction of propylamine, C3H7NH2, with water is [C3H7NH2][C3H7NH+3][OH−] . Hence, option (c) is correct.

The Kb expression for the reaction of propylamine (C3H7NH2) with water can be determined by considering the equilibrium between the amine (C3H7NH2) and its conjugate acid (C3H7NH+3) with hydroxide ions (OH−) in water. The reaction can be represented as follows:

C3H7NH2 + H2O ⇌ C3H7NH+3 + OH−

The equilibrium constant expression for this reaction, Kb, is given by the product of the concentrations of the products (C3H7NH+3 and OH−) divided by the concentration of the reactant (C3H7NH2):

Kb = [C3H7NH+3][OH−] / [C3H7NH2]

Therefore, the correct Kb expression for the reaction is [C3H7NH2][C3H7NH+3][OH−] (option c).

The Kb expression for the reaction of propylamine, C3H7NH2, with water is [C3H7NH2][C3H7NH+3][OH−] (option c).

To know more about propylamine, visit:

https://brainly.com/question/3131130

#SPJ11

A chemical equation must balance according to the rule of conservation of mass. According to the rule, mass cannot be generated or removed during a chemical process. Here the number of moles of electrons transferred in the given equation is 6.

A chemical equation is said to be balanced if the quantity of each type of atom in the reaction is the same on both the reactant and product sides. In a balanced chemical equation, the mass and charge are both equal.

The numbers which are used to balance the given chemical equation are known as the coefficients.

Here the balanced equation is:

Al³⁺ (aq) + Hg(s) → Al(s) + Hg²⁺(aq)

The oxidation and reduction half-reactions are:

Oxidation eqn: Al³⁺ + 3e⁻ → Al(s)

Reduction eqn: Hg(s) → Hg²⁺(aq) +  2e⁻

However, we need to balance equations to have an equal number of electrons. The least common multiple of 3 and 2 is 6, so you'll need to multiply the equations accordingly.

Oxidation eqn: Al³⁺ + 3e⁻ → Al(s)) ₓ 2

Reduction eqn: Hg(s) → Hg²⁺ (aq) +  2e⁻ ) ₓ 3

Oxidation eqn: 2Al³⁺ + 6e⁻ → 2Al(s)

Reduction eqn: 3Hg(s) → 3Hg²⁺(aq) +  6e⁻

The electrons transferred is 6.

To know more about balanced equation, visit;

https://brainly.com/question/29764227

#SPJ4

Your question is incomplete, most probably your full question was:

how many moles of electrons are transferred when the equation Al³⁺ (aq) + Hg(s) → Al(s) + Hg²⁺(aq) is balanced using the smallest whole-number coefficients.

The new pressure of the gas is [tex]45.906 torr.[/tex]

To calculate the new pressure:

[tex]P2 = P1 * (T2 / T1)[/tex]

where:

P1 is the initial pressure[tex](32.6 torr)[/tex]

T1 is the initial temperature [tex](735 K)[/tex]

P2 is the final pressure (unknown)

T2 is the final temperature [tex](1035 K)[/tex]

Substituting the values into the formula, we get:

[tex]P2 = 32.6 torr * (1035 K / 735 K)[/tex]

[tex]P2 = 45.906 torr[/tex]

Therefore, the new pressure of the gas is [tex]45.906 torr.[/tex]

To know more about pressure:

https://brainly.com/question/14696697

#SPJ12

Answer:

2.69g

Explanation:

The molar masses of

Cu = 63.5

Cl = 35.5

So the molar mass of [tex]CuCl_{2}[/tex] is 63.5 + (35.5 x 2) = 134.5

134.5 x 0.02 = 2.69g

Answer:

In a titration, you determine an unknown concentration of a sample by adding a second reactant of known concentration. In many titrations, you use a chemical called an indicator, which lets you know when the titration finishes.

Explanation:

Answer: it is an importtant resource because it is what keeps most things alive in earth.

Explanation:

Answer:

362,5J

Explanation:

formula for calculating Gravitational Potential Energy is mass×gravitational field strength ×height

12.5×10×2.9=362,5J

Among the given functions, (a) e^ikx, (c) k, and (d) kx are eigenfunctions of the operator d/dx. The corresponding eigenvalues are (a) ik, (c) 0, and (d) k, respectively.

To determine whether a function is an eigenfunction of the operator d/dx, we need to check if applying d/dx to the function yields a scalar multiple of the original function.

(a) For the function e^ikx, we have d/dx(e^ikx) = ike^ikx. This shows that e^ikx is an eigenfunction of d/dx with an eigenvalue of ik.

(b) Taking the derivative of cos(kx) with respect to x gives us -ksin(kx), which is not proportional to the original function. Therefore, cos(kx) is not an eigenfunction of d/dx.

(c) For the constant function k, d/dx(k) = 0. This implies that k is an eigenfunction of d/dx with an eigenvalue of 0.

(d) The function kx has a derivative of d/dx(kx) = k. Hence, kx is an eigenfunction of d/dx with an eigenvalue of k.

(e) The derivative of e^(-ax^2) with respect to x is -2axe^(-ax^2). Since -2ax is not proportional to e^(-ax^2), e^(-ax^2) is not an eigenfunction of d/dx.

(a) e^ikx, (c) k, and (d) kx are eigenfunctions of d/dx, with corresponding eigenvalues of (a) ik, (c) 0, and (d) k, respectively. On the other hand, (b) cos(kx) and (e) e^(-ax^2) are not eigenfunctions of d/dx.

To learn more about eigenfunctions here brainly.com/question/2289152

#SPJ11

The one which is a non-electrolyte in aqueous solution among the options is the compound (d) CH4 is the non-electrolyte in aqueous solution.

A non-electrolyte is a substance that does not dissociate into ions when dissolved in water, meaning it does not conduct electricity. In the case of the options provided:

a) NH4F: This compound dissociates into ammonium ions (NH4+) and fluoride ions (F-) in water, making it an electrolyte.

b) NH4Cl: This compound dissociates into ammonium ions (NH4+) and chloride ions (Cl-) in water, making it an electrolyte.

c) NaHS: This compound dissociates into sodium ions (Na+) and hydrogen sulfide ions (HS-) in water, making it an electrolyte.

d) CH4: Methane does not dissociate into ions in water and does not conduct electricity, making it a non-electrolyte.

e) Na2S: This compound dissociates into sodium ions (Na+) and sulfide ions (S2-) in water, making it an electrolyte.

Learn more about non-electrolyte here, https://brainly.com/question/15194255

#SPJ11

Answer:

Homework hint: P1V1 = nRT1 and V1, n, and R are constant. Remember to use Kelvin.

The moles of sodium chloride we need to make 500mL solution is 0.125 mole.

Molarity of any solution tells about the concentration and it is define as the no. of moles of solute present in per liter of solution, and it is represented as:

M = n/V, where

M = molarity of given NaCl solution = 0.250M

V = volume of NaCl solution = 500mL = 0.5L

No we put these values on the above equation and calculate for n, we get:

n = (0.250M)(0.5L) = 0.125 mole

Hence, required moles of NaCl is 0.125 mole.

To know more about molarity, visit the below link:

https://brainly.com/question/489225

Answer:

CNS (central nervous system)

Explanation:

The central nervous system is responsible for integrating sensory information and responding accordingly.

Neurons (specialized cells of the nervous system ) send signals along thin fibers called axons and communicate with other cells by releasing chemicals called neurotransmitters at cell-cell junctions called synapses.

Answer:

Balloon filled with helium is not a mixture because the gas in it consists of solely helium atoms.

Explanation:

Explanation:

An element is a pure substance as well, because if we fill up a balloon with just helium gas, it will only contain helium atoms.

Answer:

The right response is "6 A". A further explanation is given below.

Explanation:

The given values are:

Resistance,

R = 6 ohms

Voltage,

V = 36 volts

As we know,

⇒  [tex]V=IR[/tex]

then,

⇒  [tex]I=\frac{V}{R}[/tex]

On substituting the values, we get

⇒     [tex]=\frac{36}{6}[/tex]

⇒     [tex]=6 \ A[/tex]

Every gas has a unique set of spectral lines that help identify the gas is a true statement.

A spectral line is a dark or bright line that appears in an otherwise uniform and continuous spectrum as a result of light being emitted or absorbed at a narrow frequency range as opposed to frequencies close by.

Note that a lot of element has a distinct line spectrum, which is known as the "fingerprint" of that element. Because each element has a different amount of electrons and hence a diverse range of energy levels, each one's spectra are distinctive.

Learn more about spectral lines  from

https://brainly.com/question/4157056
#SPJ1

The compounds that can can form intermolecular hydrogen bonds are,

A) (CH₃)₂NH

B) HOCH₂CH₂OH

A) (CH₃)₂NH or (CH₃)₃N: The compound that can form intermolecular hydrogen bonds is (CH₃)₂NH. In this compound, the presence of a lone pair of electrons on the nitrogen atom allows it to act as a hydrogen bond acceptor. Hydrogen bonds can form between the hydrogen atom in (CH₃)₂NH and a hydrogen bond donor, such as a molecule with an electronegative atom (e.g., oxygen or nitrogen) bonded to a hydrogen atom.

B) HOCH₂CH₂OH or FCH₂CH₂F: The compound that can form intermolecular hydrogen bonds is HOCH₂CH₂OH. In this compound, there are two hydrogen bond donors (the hydroxyl groups) and two hydrogen bond acceptors (the oxygen atoms). Hydrogen bonds can form between the hydrogen atoms in HOCH₂CH₂OH and the oxygen atoms of other molecules.

Therefore, the compounds (CH₃)₂NH and HOCH₂CH₂OH can form intermolecular hydrogen bonds."

Learn more about intermolecular hydrogen bonds from the link given below.

https://brainly.com/question/10602513

#SPJ4

The standard free-energy change ΔG° at 25°C for the reaction H2(g) + Br2(l) → 2HBr(g) is -95.6 kJ/mol. The thermodynamic equilibrium constant K is 1.1 × 10^8.

To calculate ΔG°, we need to know the value of R and the temperature in Kelvin. The gas constant R is approximately 8.314 J/(mol·K), and to convert 25°C to Kelvin, we add 273.15 to the temperature, giving us 298.15 K. Plugging these values into the equation, we can solve for ΔG°.

Once we have the value of ΔG°, we can rearrange the equation ΔG° = -RT ln(K) to solve for K. Rearranging the equation gives us K = e^(-ΔG°/(RT)), where e is the base of the natural logarithm.

Therefore, in order to provide the specific value of ΔG° and calculate K, we need the standard free-energy change ΔG° at 25°C for the reaction H2(g) + Br2(l) → 2HBr(g).

To learn more about standard free-energy here brainly.com/question/28237924

#SPJ11

In comparison to the other ionic compounds, CaCO₃ is more soluble in acid solution.

Calcium carbonate (CaCO₃) is sparingly soluble in water. It undergoes a limited degree of dissociation and forms a weakly soluble salt.

However, when CaCO₃ is exposed to an acid solution, such as hydrochloric acid (HCl), it reacts to form a soluble salt, calcium chloride (CaCl₂), carbon dioxide (CO₂), and water (H2O). The following illustrates the reaction:

[tex]CaCO_3 + 2HCl \rightarrow CaCl_2+ CO_2 + H_2O[/tex]

Increased solubility of the CaCO₃ is the result of this reaction, which makes it easier for it to dissolve in an acidic solution as opposed to water.

Contrarily, the solubility of CuI (copper(I) iodide), PbCl₂ (lead(II) chloride), and Fe(OH)₃ (iron(III) hydroxide) in water and acid is limited and they are not greatly influenced by acid solutions.

Learn more about ionic compounds here:

https://brainly.com/question/13058663

#SPJ4

Answer:

(4) asexual reproduction (5) vegetative propagation (6) binary fission (7) budding (8) fragmentation

The correct words to fill the given blanks would be as follows:

4). A-s-e-x-u-a-l reproduction.

5). Vegetative propagation.

6) Binary fission

7). Budding

8) Fragmentation

Reproduction

Reproduction is denoted as the process by which living organisms generate their younger beings.

Some organisms generate through s-e-x-u-a-l mediums while others generate through the A-s-e-x-u-a-l process.

The a-s-e-x-u-a-l methods of reproduction include:

Learn more about "Organisms" here:

brainly.com/question/9349989