hydrogen or delayed, under-bead cracking becomes a concern when welding steels with which of the following minimum carbon content?

Answers

Answer 1

When welding steels have 0.30% of the required carbon content or more, premature or premature, under-bead cracking becomes an issue.

Describe hydrogen.

Methane, often known as natural gas, may be replaced with hydrogen, a clean fuel. It is the most prevalent chemical element and is thought to make about 75% of the universe's mass. Numerous hydroxyl group may be found in water, plants, animals, and, of course, people here on earth.

Why does hydrogen cost so much?

Hydrogen is more difficult to transport, store, and deliver to the place of use compared to other fuels because it has a lower energy density per unit volume compared to other fuels.

To know more about Hydrogen visit:

https://brainly.com/question/28937951

#SPJ4

The complete question is-

Hydrogen or delayed, under-bead cracking becomes a concern when welding steels with which of the following minimum carbon content?

0.30%

0.15%

0.50%

0.45


Related Questions

the number of electrons present in the p orbitals in the ouitermost electron shell of the halogen atoms is

Answers

The number of electrons present in the p orbitals in the outermost electron shell of the halogen atoms depends on the element.

Halogens are a group of chemical elements consisting of fluorine, chlorine, bromine, iodine, and astatine. They are all highly reactive and are found in a variety of compounds. Halogens are used in a wide range of applications from household cleaning products to industrial processes.

The number of electrons present in the p orbitals in the outermost electron shell of the halogen atoms is

For Fluorine (F): 2 electrons in the 2p orbital

For Chlorine (Cl): 6 electrons in the 3p orbital

For Bromine (Br): 10 electrons in the 4p orbital

For Iodine (I): 14 electrons in the 5p orbital

For Astatine (At): 18 electrons in the 6p orbital

For more questions like Halogens click the link below:

https://brainly.com/question/11156152

#SPJ4

Which of the following wavenumber corresponds to the carbon/carbon triple bond region on an IR spectrum? 500 4000 cm 400-4000 cm1 400 1500 cm1 2100 2300 cm1 1600 - 1850 cm1

Answers

The wavenumber that corresponds to the carbon/carbon triple bond area on an IR spectra is 2100–2300 cm–1.

Alkynes in IR Spectroscopy Training Alkynes are substances with a triple bond between carbon atoms (-CC-). Between 2260 and 2100 cm-1, a faint band represents the -CC stretch. Due to the rarity of organic substances that exhibit an absorption in this area, this can be a crucial diagnostic tool. In compounds known as alkenes or alkynes, carbon atoms can also form double or triple bonds. An sp 2-hybridized orbital and a p-orbital that wasn't engaged in the hybridization combine to produce a double bond. An sp-hybridized orbital and two p-orbitals from each atom combine to form a triple bond.

To know more about Alkynes please click on the link brainly.com/question/23508203

#SPJ4

when adding refrigerant to a newly evacuated system, which of the following is the best method

Answers

When adding refrigerant to a newly evacuated system, add liquid refrigerant to the system through the liquid-line service valve. The correct option is B.

What is a refrigerant?

A refrigerant is a substance that is used in a heat cycle to transfer heat from one area to another.

At room temperature, it is usually a gas. Found in almost everything that cools, and occasionally in things that heat, most notably air conditioners, refrigerators, freezers, and vehicle air conditioners.

If liquid refrigerant is added to the suction line while the system is not running, the compressor may be flooded upon startup.

The compressor will not start in some cases. Only liquid refrigerant should be added to the liquid line when the system is not running.

Thus, the correct option is B.

For more details regarding a refrigerant, visit:

https://brainly.com/question/28265596

#SPJ1

Your question seems incomplete, the missing options are:

A. Add liquid refrigerant to the system through the suction- line service valve

B. Add liquid refrigerant to the system through the liquid-line service valve

C. Add vapor refrigerant to the system through the suction- line service valve

D. Add vapor refrigerant to the system through the liquid- line service valve

Using the following standard reduction potentials,
Fe3+(aq) + e- →Fe2+(aq) E° = +0.77 V
Ni2+(aq) + 2 e- →Ni(s) E° = -0.23 V
calculate the standard cell potential for the galvanic cell reaction given below, and determine whether or not this reaction is spontaneous under standard conditions.
Ni2+(aq) + 2 Fe2+(aq) → 2 Fe3+(aq) + Ni(s)
a) E° = -1.00 V, spontaneous
b) E° = +1.00 V, nonspontaneous
c) E° = +1.00 V, spontaneous
d) E° = -1.00 V, nonspontaneous

Answers

The standard cell potential for the galvanic cell reaction given below is

+100 V and it is non spontaneous reaction.

E°= Fe2+(aq) - Ni+(s)

E°=+0.77 V- ( -0.23 V)

E°=+100 V

this reaction is non spontaneous.

A spontaneous reaction is one that favors the formation of products under the reaction's current conditions. An illustration of a spontaneous response is a roaring bonfire (see illustration below). A fire is exothermic, which means that as heat is released into the environment, the energy of the system decreases. Since gases like carbon dioxide and water vapor make up the majority of a fire's byproducts, the entropy of the system rises during most combustion reactions. Because of this decrease in energy and rise in entropy, combustion reactions take place on their own. A non-spontaneous reaction is one that, under the specified conditions, does not favor the formation of products.

To know more about  non spontaneous visit : https://brainly.com/question/13790391

#SPJ4

the conversion of succinate to oxaloacetate during krebs cycle involves reduction, dehydration, reduction oxidation, hydration, oxidation oxidation, dehydration, oxidation reduction, hydration, reduction

Answers

During the Krebs cycle, succinate is converted to oxaloacetate through oxidation, hydration, and oxidation.

There were three processes involved in converting succinate to oxaloacetate. First, fumarate is produced by oxidising succinate. Oxidation is the result of the removal of hydrogen from succinate. These hydrogen are taken up by FAD, resulting in FADH2.

Hydration then follows. Malate is created by combining fumarate with water.

Malate is then subjected to oxidation by loosing hydrogen, which NAD takes up. Oxaloacetate is created when malate undergoes oxidation.

learn more about succinate here:

https://brainly.com/question/15395369

#SPJ4

buna s. the americans, who improved upon its manufacturing with the copolymerization of butadiene and styrene, gave it the name gr-s (government rubber-styrene) throughout the duration of the war. this copolymer, later known as sbr, quickly rose to prominence as the most significant synthetic rubber, accounting for nearly half of global output

Answers

Buna-S is a synthetic rubber. The monomers that are used for it is butadiene and styrene. It is generally used for making automobiles tyres, floor tiles, footwear components etc.

Any artificial elastomer is generally referred to as synthetic rubber. Synthetic rubber is usually derived from the  additional polymers of polyene monomers and, unless the synthetic rubber is disclosed as a polysulfide rubber, laminates that is usually containing such a layer will be classified with additional polymers.

Synthetic rubber is any man-made elastomer. They're polymers made from petroleum byproducts. Synthetic rubber, like natural rubber, has several applications in the automobile sector, which is generally including tyres, door and window profiles, seals such as O-rings and gaskets, hoses, belts, matting, and flooring.

Buna-S is a polymer.

Its name derives Bu stands for butadiene and Na stands for sodium and S stands for Styrene.

It is formed by the copolymerization of butadiene and styrene.

To know more about Buna S

https://brainly.com/question/4047007

#SPJ4

this chemical tightly binds to hemoglobin, blocking its ability to deliver oxygen to red blood cells. A. ulfur dioxide B.nitrogen dioxide C.sulfuric acid D.carbon monoxide

Answers

D. Carbon monoxide is the chemical that tightly binds to hemoglobin, blocking its ability to deliver oxygen to red blood cells.

When carbon monoxide interacts and binds with hemoglobin in the blood to generate carboxyhemoglobin, carbon monoxide poisoning ensues (COHb). Less oxygen is transferred to bodily tissues and key organs including the brain and heart when carbon monoxide binds to hemoglobin. Hemoglobin and carbon monoxide have a connection that is roughly 250 times stronger than hemoglobin and oxygen.

Although carbon monoxide binds to hemoglobin with an about 240 times greater affinity than oxygen does, this affinity varies between and even within species.

The Hb-Kirklareli mutation causes systemic carboxyhemoglobin to consistently reach a level of 16% COHb in people because it has an affinity for carbon monoxide that is 80,000 times larger than that for oxygen.

To know more about hemoglobin here:

https://brainly.com/question/10114997#

#SPJ4

Make an ionic equation from: V2O5 (s) + 6HCl (aq) => 2VOCl3 + 3H2O (l)

Answers

The net ionic equation of the reaction is; [tex]6H^+(aq) + 3O^{2-} (aq) ------ > 3H_{2} O(l)[/tex]

What is the net ionic reaction equation?

We know that the ionic reaction equation has to do with the equation that shows the species that underwent a change in the reaction. In this case, we have to be able to look at the reaction, break into ions before we can be able to make the molecular reaction equation.

We have;

Molecular equation; [tex]V_{2}O_{5} (s) + 6HCl (aq) ---- > 2VOCl_{3}(aq) + 3H_{2}O (l)[/tex]. We can see the species that have undergone a change from here and the net ionic equation can now be easily written as;

[tex]6H^+(aq) + 3O^{2-} (aq) ------ > 3H_{2} O(l)[/tex]

Learn more about ionic equation:https://brainly.com/question/15466794

#SPJ1

how many signals would you expect to find in the 13c nmr spectrum of the following compound? 6 7 8 9 10

Answers

In the compound's 13c nmr spectrum, there should be six signals. Despite there being four carbon atoms, there are only three distinct habitats for the carbons in the spectrum, which has a total of three peaks.

The carbon skeleton itself, not simply the proton linked to it, is the subject of the 13C NMR. The quantity of signals indicates the number of distinct carbons or sets of comparable carbons. b. Signal splitting reveals how many hydrogen atoms are bonded to each carbon. Due to sp2 hybridization and the double bond to oxygen, the 13C-NMR signals for carbonyl carbons are often the deepest downfield (170–220 ppm).

To know more about carbonyl carbons click here brainly.com/question/12308782

#SPJ4

Question 1 (2 points)



Determine the percent composition of chlorine in iron (III) chloride.?



Question 2 (5 points)
If we start this reaction with 40 grams of magnesium and an excess of nitric acid, how many grams of hydrogen gas could be produced?

____ Mg + ____ HNO3 à ____ Mg(NO3)2 + ____ H2


If 1.7 grams of hydrogen is actually produced, what was the percent yield of hydrogen?



Question 3 (6 points)
Magnesium metal reacts quantitatively with oxygen to give magnesium oxide, MgO. If 5.00 g of Mg and 5.00 g of O2 are allowed to react, what weight of MgO is formed, and what weight of which reactant is left in excess?



Question 4 (6 points)
Mr.T thinks the windows need cleaning (instead of preparing his lesson), (What a mistake!). So instead he starts cleaning his office because it is a disaster. He pulls out the ammonia (NH3) and gets to work. It takes him 5 hours!! During that time he decides to do a little chemistry, because he doesn't want to fall behind. He weighs his bottle of ammonia before (32.3g) and after (30.7g) he cleans. Using this information, he calculates how many atoms are present in the ammonia he used during cleaning.



Question 5 (6 points)
Mr.T keeps getting in trouble for not cleaning his plate completely after supper every night. He argues that it is because there is water-insoluble compounds on his plate so the water won't clean it. Being the cheeky chemist that he is he comes up with a method to make carbon disulfide, a natural solvent for water-insoluble compounds like fats, oils, and waxes. He is going to make millions!! The unbalanced reaction is shown below. When 27.5 g of carbon reacts with 235 g of sulfur dioxide, what mass of carbon disulfide can Mr.T make? Balance the following equation and use it to determine the limiting reagent in order to answer the problem.

Answers

Answer:

( I only know 2,3,4 )

If we start this reaction with 40 grams of magnesium and an excess of nitric acid, how many grams of hydrogen gas could be produced?

ANSWER:   40.g Mg + 1 mol HNO3 à 1 mol Mg (NO3)2+ 2.02g H2

= 3.3g H2

If 1.7 grams of hydrogen is actually produced, what was the percent yield of hydrogen?[tex]\frac{1.7g'hz}{3.3g'hz} x100 = 52% yield[/tex]

ANSWER:

Magnesium metal reacts quantitatively with oxygen to give magnesium oxide, MgO. If 5.00 g of Mg and 5.00 g of O2 are allowed to react, what weight of MgO is formed, and what weight of which reactant is left in excess? 

ANSWER: 2 Mg(s) + O2(g) → 2 MgO(s)

if the solute is less volatile than water, explain what will happen to the volumes in the two containers as time passes.

Answers

After a while, the volume of water will shrink and the volume of the aqueous solution will grow.

What exactly does the word "solute" mean?

Solute refers to an object that dissolves in a solution. In fluid solutions, there is a larger concentration of solvent than solute. Salt and water are two excellent examples of substances that we use on a daily basis. Since salt dissolves in water, it serves as the solute.

Water: a solute or not?

Solute is the name for the substance that dissolves in the solvent. Solute concentration is lower than solvent concentration. One instance of a mixture where salt serves as the solute and water as the solvent is salt and water.

To know more about Solute visit:

https://brainly.com/question/15757469

#SPJ4

Consider the generic ionic compounds with the formulas AX and BY and the following solubility rules: AX soluble; BY soluble; AY soluble; BX insoluble Let circles represent A+ ions, squares represent B+ ions, triangles represent X? ions, and diamonds represent Y? ions. We can then represent solutions of the two compounds (AX and BY) as follows:
Draw a molecular-level representation showing the result of mixing the two solutions.
Drag the appropriate labels to their respective targets. Note: not all labels will be used.

Answers

As the BX is insoluble but is an ionic salt that shows that the reaction forms the precipitate and BX will remain settled at the bottom. While AY is soluble salt means in an aqueous solution it will remain in form of ions.

The distance between the A+ circle and Y- y-diamond will be represented as larger than the distance between the B+ square and X- triangle.  Distance shows the interaction of water molecules with ions. 

The reaction is = AX(aq) + BY(aq) --> AY(aq) + BX(s)

Ionic compounds are neutral compounds made up of positively charged ions called cations and negatively charged ions called anions. For binary ionic compounds name the compound by writing the name of the cation first and then the name of the anion.

Learn more about Ionic compounds here:- https://brainly.com/question/2687188

#SPJ4


Calcium oxide reacts with water in a combination reaction to produce calcium hydroxide:
CaO (s) + H₂O (1)→ Ca(OH)2 (s)
A 3.50-g sample of CaO is reacted with 3.38 g of H₂O. How many grams of water remain after completion of reaction?

Answers

The experiment's yield as a percentage was 92.4%. The reaction's balanced equation is provided below: CaO + H₂O —>Ca(OH)₂

How much water is left over when the reaction is finished?

The mass of CaO that reacted and the mass of Ca(OH)2 generated by the balanced equation will then be determined.

CaO has a molar mass of 40 plus 16.

= 56 g/mol

The balanced equation yields the mass of CaO as 1 56 = 56 g.

Ca(OH)2's molecular mass is 40 + 2(16 + 1)

= 74 g/mol

The balanced equation yields the mass of Ca(OH)2 as 1 74 = 74 g.

From the above balanced equation,

56 grams of CaO were converted into 74 grams of Ca(OH)2.

When 5 g of CaO reacts, 6.61 g of Ca(OH)2 is created.

Therefore, 6.61 g is the theoretical yield of Ca(OH)2.

Finally, we will calculate the Ca(OH)2 percentage yield.

Ca(OH)2 really produced 6.11 g.

Ca(OH)2 theoretical yield is 6.61 g.

The percentage of Ca(OH)2 that was produced was 92.4%.

Consequently, the experiment's percentage yield is 92.4%.

To learn more about percentage yield refer

https://brainly.com/question/13143779

#SPJ1

9.45 draw a structural formula for the major organic product of each reaction and specify the most likely mechanism by which each is formed.

Answers

The reactions listed follows various mechanisms which includes SN1, SN2, of nucleophilic substitution, elimination reaction and so on.

When cyclobromohexene (C6H8Br) reacts with methanol (CH3OH), a substitution reaction occurs. The bromine atom in cyclobromohexene is replaced with a methyl group from the methanol. This results in the formation of 1-methyl cyclohexene (C6H10) and hydrobromic acid (HBr).

The reaction follows a mechanism known as an SN1 (substitution nucleophilic unimolecular) reaction. In this type of reaction, the bromine atom in cyclobromohexene is first protonated (it gains a hydrogen atom) by the methanol. This results in the formation of a carbocation (a positively charged carbon atom). The carbocation then reacts with a methanol molecule to form a new carbon-oxygen bond and release a proton. This forms 1-methyl cyclohexene and hydrobromic acid.

The treatment of haloalkanes with sodium hydroxide is a nucleophilic substitution reaction. The reaction involves the nucleophilic attack of the hydroxide anion on the carbon atom of the haloalkane to form an alkoxide ion and a halide ion. This process is known as the S N2 mechanism. The reaction proceeds via a three-step mechanism:

1) formation of a transition state where the incoming nucleophile attacks the carbon atom of the haloalkane.

2) the displacement of the leaving group, and

3) the formation of the product. The reaction is favorable due to the presence of strong nucleophilic and electrophilic sites in the reactant.

An alkyl halide can be converted to an ether via an SN2 reaction. In this type of reaction, a nucleophile attacks the carbon atom of the alkyl halide, replacing the halide group with an oxygen atom to form an ether. This reaction is generally favored in an aprotic solvent such as diethyl ether and requires an appropriate nucleophile such as an alkoxide ion. The SN2 reaction is a substitution reaction in which the nucleophile attacks the carbon atom, pushing off the leaving group (halide) in a single concerted step.

Dehydrohalogenation is a reaction in which a halogen atom (e.g. chlorine or bromine) is removed from an alkane along with the hydrogen atom to which it is attached, resulting in the formation of an alkene. This reaction is usually catalyzed by a strong base, such as an alkoxide or hydroxide ion, which abstracts a proton from the alkane, leaving the halogen atom with a negative charge. This halogen anion is then attacked by the nucleophile (the base itself) resulting in the formation of an alkene and the regeneration of the base. The reaction is also known as a "beta-elimination" reaction since the beta-carbon (the carbon next to the halogen atom) is the one that is eliminated in the reaction.

The image attached clearly explains the reactions.

To know more about Substitution reaction, click below:

https://brainly.com/question/10143438

#SPJ4

A team at a university in Pennsylvania has concerns about the health of streams in a watershed because of the various land uses in the area. There has been an increase in road repair work, and the area has many dairy farms. Which of the following would be most effective at preventing sediment runoff into the streams of the watershed?

Answers

A team at a university in Pennsylvania has concerns about the health of streams in a watershed because of the various land uses in the area. Maintain zones of grass at least 100m wide on the sides of streams in the area  would be most effective at preventing sediment runoff into the streams of the watershed

watershed is a piece of land which drains or "sheds" water into a particular body of water. A watershed exists for every body of water. Rainfall and snowmelt are channelled into rivers and streams by watersheds. These relatively small bodies of water drain into larger bodies of water, such as lakes, bays, and seas. Stream water is also obtained from permeates and artesian wells where groundwater discharges to the land surface from aquifers. As this water collects and flows downslope, it concentrates in low areas, forming small stream channels. These small streams are known as a watershed's headwaters

Learn more about watershed here:

https://brainly.com/question/13313239

#SPJ4

the pulley shown below is massless and frictionless. if the system is released from rest from the position shown, which of the following statements are true (more than one answer can be correct). since block b is larger and heavier than block a, the pulley will rotate clockwise.

Answers

A massless string crosses a frictionless pulley while carrying two masses at its ends: m and me (m;> m.

What exactly does it mean when a pulley has no friction?

When we say a pulley is frictionless, we mean that there is little to no friction in its bearings, which allows the pulley to rotate freely and without encountering any resistance. We don't want to imply that there is little to no friction between the string and the surface of the pulley.

How can the tension be determined in a frictionless pulley system?

The following equations are used to determine the tension T = M x A. If you are attempting to determine T in a simple pulley system with a mass of 9g and an upward acceleration of 2m/s2, then T = 9g x 2m/s2 = 18gm/s2

To know more about frictionless pulley system visit:-

https://brainly.com/question/29415092

#SPJ4

an unknown gas x effuses 1.65 times faster than propane (c3h8). what is the molar mass of gas x? (round to nearest whole number; omit units). [blank] g/mol

Answers

The molar mass of unknown gas is - 16 g/mole

To calculate the rate of diffusion of gas is , we use Graham's law.

This law states that the rate of diffusion is inversely proportional to the square root of of the molar mass of the gas. The equation of the law is :

Rate of diffusion [tex]\alpha[/tex]  [tex]\frac{1}{ \sqrt{ Molar mass of the gas} }[/tex]

Given that,

[tex]Rate_{unknown gas}[/tex]  = 1.65 ×[tex]Rate_{C_{3}H_{8} }[/tex]

we know that,

Molar mass of the propane = 44 g/mole

Take the ratio of rate of diffusion of gases, we get:

[tex]\frac{Rate_{( unknown gas)} }{Rate_{C_{3} H_{8} } }[/tex]  =  [tex]\sqrt{} \frac{MC_{3}H _{8} }{ M_{(unknown gas)} }[/tex]

Putting values in above equation, we get:

    [tex]\frac{1.65 * Rate_{C_{3} H_{8} } }{ Rate_{C_{3} H_{8} }}[/tex]     =   [tex]\sqrt{\frac{44}{ M_{(unknown gas} } }[/tex]

⇒    1.65    =  [tex]\sqrt{\frac{44}{M_{(unknown gas} } } }[/tex]

⇒    [tex]1.65^{2}[/tex]    =    [tex]\frac{44}{M_{(unknown gas)} }[/tex]

⇒  [tex]M_{(unknown gas)}[/tex] = [tex]\frac{44}{2.7225}[/tex]

⇒  [tex]M_{(unknown gas)}[/tex] = 16.1616  

[tex]M_{(unknown gas)}[/tex]  = 16

Hence, the molar mass of unknown gas is - 16 g/mole.

Read more about molar mass:

https://brainly.com/question/21334167

#SPJ4

Use the van der Waals equation to calculate the volume of 1.055 mol of neon at a pressure of 460.0 atm and a temperature of 375.0 K. (Use a = 0.211 L² .atm/mol? and b = 0.0171 L/mol for the van der Waals constants.) (Hint: One way to solve the van der Waals equation for V is to use successive approximations. Use the ideal gas law to get a preliminary estimate for V.) Express your answer in liters to three significant figures.V = ___ L

Answers

The volume of 1.055 mol of neon at a pressure of 460.0 atm and a temperature of 375.0 K is 0.046 L

What is  the van der Waals equation?

The relationship between pressure, volume, temperature, and amount of actual gases is described by the Van der Waals equation. The equation for a real gas with 'n' moles is expressed as;

(P + an²/V²)(V - nb) = nRT

The formula can also be expressed as follows: Cube power of volume:

V = nRT/(P + an²/V²) -nb

Given that:  a = 0.211 L² .atm/mol,  b = 0.0171 L/mol, P = 460.0 atm T = 375.0 K, n = 1.055

Now from ideal gas equation V = nRT/P we get:

V = (1.055×0.082×375)/460.0 L

= 0.0705 L

Now from the van der Waals equation:

V =  (1.055×0.082×375)/(460.0 + 0.211×1.055²/0.0705²) - (1.055×0.0171)

= 0.046 L

Hence, volume of the gas is 0.046 L.

Learn more about the van der Waals equation here:

https://brainly.com/question/29412319

#SPJ1

True or False: bulk deformation of magnesium is only possible at hot-working temperatures somewhat above the melting point

Answers

True: bulk deformation of magnesium is only possible at hot-working temperatures somewhat above the melting point

Magnesium supports muscle and neuron function as well as energy synthesis in the body, among many other vital functions. Typically, low magnesium levels don't result in any symptoms. On the other hand, persistently low levels can raise your risk of osteoporosis, type 2 diabetes, high blood pressure, and heart disease.

The chemical element magnesium has the atomic number 12 and the letter Mg as its symbol. It is a glossy grey metal that is similar to the other five alkaline earth metals in terms of both physical and chemical characteristics (group 2 of the periodic table).

Only in the presence of other elements does magnesium naturally arise, and in these situations, it almost invariably possesses a +2 oxidation state. The artificially created free element (metal) is very reactive. The liberated metal emits a distinctive brilliant-white light during combustion.

To learn more about magnesium Please click on the given link:

https://brainly.com/question/25860912

#SPJ4

sodium borohydride is reactive and a selective reducing agent than lithium aluminum hydride.

Answers

When compared to aluminium hydride, the anion of Sodium borohydride is substantially less reactive. With protic solvents like water, it reacts very slowly. It can be utilised in an ethanol-based solvent or a basic aqueous solution.

Sodium borohydride works well as a reducer. It works just as well as lithium aluminium hydride (LiAlH4) for reducing aldehydes and ketones to alcohols while being less potent. It typically won't decrease esters, carboxylic acids, or amides by itself (although it will reduce acyl chlorides to alcohols). Sodium borohydride is more chemoselective in action because it is less reactive than lithium aluminium hydride. At room temperature, it only reacts slowly with most alcohols and water, and it reduces with this reagent.

To learn more about Sodium borohydride please click on below link

https://brainly.com/question/28563915

#SPJ4

From the same 44,000 liters of water used to discover Rubidium Chloride, Busen extracted 17 g of Cesium Chloride (MW=168.36). what was the original concentration (in micromolar) of Cesium chloride? ______ micromolar

Answers

Radiation therapy uses the radioactive isotope of the alkali metal cesium (Cesium 137). A non-radioactive salt called cadmium chloride is marketed as an alternative cancer treatment. It is based on discoveries that cancer cells have an affinity for cesium ions and is also known as "high pH therapy" (1).

What is the cesium chloride chemical formula?

The inorganic compound with the chemical formula CsCl is known as calcium chloride or cesium chloride. In a variety of specialized applications, this colorless salt serves as a significant supply of caesium ions. Each caesium ion in its crystal structure constitutes a primary structural type that is coordinated by 8 chloride ions.

Is CsCl an electrical conductor?

For usage compatible with chlorides, cesium chloride is a great supply of crystalline cesium that is water soluble. When combined or dissolved in water, chloride compounds can conduct electricity when fused.

To know more about cesium visit;

https://brainly.com/question/29132590

#SPJ4

How do you do number thirty?

Answers

what is 30 can you show a clearer picture of the problem or a cropped one

what is the ratio of the volume occupied before the reaction to that following the reaction? enter your answer in the form of a decimal number.

Answers

the ratio of the volume occupied before the reaction to that following the reaction is 0.5.

the ratio of volume is calculated by v1/v2 where v1=n1=4 and v2=n2=8, hence 4/8=1/2=0.5.The percentage of gases which react to create a product is regarded to as the volume ratio. Consider the following aspects nitrogen and oxygen. As seen in the balanced chemical equation below, when these gases react, nitrogen dioxide is formed. Based on Avogadro's molar volume hypothesis, we can calculate the volume equivalents of the moles. The law of Avogadro. According to Avogadro's law, the volume occupied by one gram-mole of gas is approximately 22.4 litres (0.791 cubic foot) at standard temperature and pressure (0 °C, 1 atmosphere). Avogadro's gas law is expressed as V/n = k, where V is volume, n is the number of gas particles, and k is a constant. V1/n1 = V2/n2 is another way to express Avogadro's gas law.

Learn more about volume ratio here:

https://brainly.com/question/13330873

#SPJ4

The complete question is :

VISUALIZATION Avogadro's Law 8 + 8 Molecules 4 Molecules,what is the ratio of the volume occupied before the reaction to that following the reaction? enter your answer in the form of a decimal number.

Which of these is NOT correct?1. Kinases are enzymes that phosphorylate other molecules.2. Cyclic AMP binds to calmodulin.3. Ion channels are found on both the plasma membrane and the endoplasmic reticulum.4. Tyrosine-kinase receptors consist of two polypeptides that join when activated by a signal molecule.5. Phospholipase C catalyzes the formation of IP3.

Answers

False: Cyclic AMP binds to calmodulin Calcium binds to calmodulin is the appropriate response.

This protein-protein interaction ultimately has a physiological consequence; for instance, in smooth muscle, Ca2+ binding to calmodulin causes it to connect with and activate myosin light chain kinase, which in turn catalyses the phosphorylation of myosin. The smooth muscle contracts as a result of this reaction.

The protein calmodulin interacts with calcium ions as they enter a cell. Four calcium sites are present in this protein, and when three or four of these sites are occupied by calcium, the calmodulin changes form and starts a number of internal cell processes, such as the activation or inhibition of protein kinases.

To learn more about Calcium binds to calmodulin. Please visit the below link.

https://brainly.com/question/14351855

#SPJ4

Arrange the following from lowest to highest entropy: NO(g) , NO2(g), N2O4(g) , N2 (g) . Assume 1 mole of each at the same conditions.

Answers

Values of entropy, from lowest to greatest

N2 = 191.6, NO = 210.8, NO2 = 240.0, N2O4 = 304.4, N2 is the lowest and N2O4 is the greatest entropy values.

Entropy, broadly speaking, serves as a metric for energy quality, with lower entropy indicating higher quality. Entropy is lower for energy that has been carefully organised (the efficient library). The random-pile library is a chaotic energy storage system with high entropy.

In other terms, entropy is the growth in disorder inside a system. It is described as the measurement of degree of unpredictability.

Greek words en- = in + trope = a turning were combined to form the word entropy by German physicist Rudolf Clausius in 1865 [Cl] (point). The name has an energy analogue, and etymologists think it was intended to signify the type of energy that all energy eventually and inevitably transforms into: wasteful heat.

To learn more about entropy. Please visit the below link.

https://brainly.com/question/13146879

#SPJ4

1. The standard enthalpy of formation values, standard entropy values, and the standard free energy of formation values are listed in Appendix C, and other Thermodynamic tables.
Which of the following is not a requirement for standard state conditions. (Be sure not to confuse standard state conditions with STP conditions used for gas phase systems.)
A) Gases: 1 atm pressure
B) Solutions: 1 M concentration
C) Solid: Pure
D) Liquid: Pure
E)
Temperature: 273 K

Answers

The following is not a requirement for standard state conditions: Gases: 1 atm pressure ,Liquid: Pure ,Temperature: 273 K.

The standard state of a substance (pure substance, mixture or solution) is the reference point for calculating properties under various conditions. A superscripted circle ° (degree symbol) or the Plimsoll symbol (⦵) is used to denote thermodynamic quantities in the standard state. B. Enthalpy change (ΔH°), entropy change (ΔS°), or Gibbs free energy change (ΔG°) [1][2]. The standard recommends plimsoll, but the degree symbol is widely used.

Learn more about Standard State here:

https://brainly.com/question/13148273

#SPJ4

for each reaction, consider whether a reaction will move in the forward (right) or reverse (left) direction? select the arrow that best indicates the acid-base equilibrium position.

Answers

A forward reaction is a reaction in which the products are produced from reactants and it goes from left to right in a reversible reaction.

Chemical equilibrium is the state in which both reactants and products are present in the concentrations which have no further tendency to change with time. A forward reaction is a reaction in which products are usually produced from reactants and it goes from left to right in a reversible reaction.

A backward reaction is a reaction in which reactants are produced from products and it goes from right to left in a reversible reaction. Chemical equilibrium is achieved when the rate of the forward reaction is generally equal to the rate of the backward reaction.

For a reversible reaction, one is the forward reaction and the other is generally considered as the backward reaction. The forward reactions usually favour the formation of products and the backward reaction favours the formation of reactants.

To know more about forward reaction

https://brainly.com/question/8592296

#SPJ4

The indicator in a titration changed color after 0.005 mol of calcium hydroxide were added to to a sulfuric acid solution for the chemical reaction shown below.

How much sulfuric acid was in solution?

H2SO4+Ca(OH)2 > CaSO4+2H2O

0.005 mol
0.1 mol
0.105 mol
I need more information to answer this question.

Answers

According to the equation, the solution must be neutralized using 1 mole of Ca(OH)₂ per each 1 mole of H₂SO₄. Therefore, 0.005 moles of H₂SO₄ are needed for every mole of Ca(OH)₂.

What is the definition of titration?

Titration, commonly referred to as titrimetry, is a method of chemical qualitative analysis used to determine the level of a certain analyte in a mixture. Titration is a crucial analytical chemistry technique that is also frequently referred to as serial dilution.

What does titration mean?

The French term titrer (1543), which means the percentage of silver and gold in coins or in compositions of gold or silver, is where the word "titration" comes from. This word is a measurement of fineness of purity.

To know more about Titration visit:

https://brainly.com/question/2728613

#SPJ1

Which of the following represents an element in its most stable form at standard state? (Select all that apply.] O N (g) O C (diamond) O CO2 (g) O I2 (s) O Ge (s) O Pt (s) O O2 (g) O Na+ (s)

Answers

Element in its most stable form at standard state:

CO2(g) , I2(s) , Pt(s) , O2(g)

The maximum number of electrons that can be accommodated in the last shell or orbital is called a stable element. In the case of helium, the helium atom has only one shell. The maximum number of electrons that can be accommodated in the first shell is two. Therefore, the helium "two-electron" pattern system is stable. Most stable elements have an "octet electron configuration". Other examples are Neon (Ne), Argon (Ar), Krypton (Kr), Xenon (Xe) and Radon (Rn). These elements are chemically stable elements, so they usually do not react chemically.  Floating objects that are denser than water, such as razor blades and insects, float on the surface of the water without being partially submerged.

learn more about stable element here:

https://brainly.com/question/1415612

#SPJ4

carbon dioxide equivalent ( co2e ) is used to compare contributions to climate change of various greenhouse gases. a study at a farm calculated the carbon dioxide equivalent for different production stages for beef and chicken production. which of the following statements is best supported by the data in the graph?

Answers

The correct statement is that beef contributes to green house effect. As a result of fermentation in cows' digestive tracts, which emits methane gas, producing beef results in a greater greenhouse gas contribution than producing chickens.

India, for instance, consumes the least meat of any nation despite having the biggest population of cattle worldwide. Cows live longer as a result, and they produce more methane overall. Additionally, cows in tropical areas produce less milk and meat, which increases the time it takes for them to reach the market. The greenhouse effect explains how heat is trapped at the Earth's surface by "greenhouse gases."You may think of these heat-trapping gases as a blanket keeping the Earth warmer than it otherwise would be. Examples of greenhouse gases include carbon dioxide, methane, nitrous oxides, and water vapor. “Feedback” is a type of water vapor that reacts physically or chemically to changes in temperature. Scientists have found that the warming effect of carbon dioxide contributes to the stabilization of Earth's atmosphere.

Learn more about methane gas here:

https://brainly.com/question/12645626

#SPJ4

As a result of fermentation in cows' digestive systems, which emits methane gas, producing beef results in a greater greenhouse gas contribution than producing chickens.

When comparing the emissions of different greenhouse gases (GHGs) based on their global-warming potential (GWP), carbon dioxide equivalents, also known as CO2e, are used to convert levels of other gases to the equivalent quantity of carbon dioxide with the same GWP.While this is going on, global-warming potential explains the relative potency of a greenhouse gas, molecule for molecule, taking into account how long it remains active in the atmosphere. The following are some of the greenhouse gases included in the Kyoto Protocol: Carbon dioxide (CO2). Nitrous oxide, methane (CH4) (N2O). Hydrofluorocarbons (HFCs), perfluorocarbons (PFCs), sulfur hexafluoride (SF6), and nitrogen trifluoride are examples of fluorinated gases (NF3).

To know more about greenhouse gas click here brainly.com/question/4509458

#SPJ4

Other Questions
the narrative approach first found its way into psychotherapy in the hermeneutic traditions in which of the following? Please answer the two following questions. Solve for x.3/7x +1/4x =38 you place a small air cart on a 3.00 m air track and set it into motion with a speed of 0.70 m/s. due to very good elastic bumpers at each end of the track, the cart oscillates back and forth between the two ends of the track with essentially no loss in energy. determine the period and the frequency for this motion. you may assume that the length of the cart is negligible compared to the length of the track. which of the following is not one of the strategies identified by houston and kramarae for resisting the process of muting? group of answer choices negotiating a shared language that can be understood by dominant and subordinate groups naming the strategies of silencing (e.g., ridicule, ritual, harassment) studying diaries, journals, quilts, and other artistic expressions of women developing a more representative language to capture women's uniquely gendered experiences for a sculpture to be considered high relief, the forms must project out from the background for at least percent of their visual depth. multiple choice question. 33 50 100 25 Which statements best describe the first stage of cellular respiration? Select three options. Make a the subject of the formula v = u + at.Hence, find the value of a when t = 4, u = 10 and v=50. the star r coronae borealis varies irregularly due to emission of clouds of this element. the atmosphere of cw leonis is dominated by this element. in addition to transition metal oxides and lithium, compounds containing this element are characteristic of spectra of brown dwarfs. the immediate cause of For 16-23, identify the atomic model that matches the description below. Some letters may be used more than onceA. Dalton's atomic modelB. Thomson's atomic modelC. Rutherford's atomic modelD. Bohr atomic modelE. Quantum mechanical model16. In this model, you can only describe the most probable location of an electron.17. This model describes the atom as indivisible and indestructible.18. This model was the first to propose that an atom is mostly empty space.19. This model describes an atom as a positive sphere on which electrons are embedded.pls help Who is mr. wolfshiem? question 4 options: he is the owner of gatsby's favorite restaurant in new york. he secretly arranged to have a member of the mob murdered outside the restaurant. he is jordan baker's coach and manager. he thinks jordan is spending too much time with nick and not enough on her golf. he is a racketeer and a business associate of gatsby's. he fixed the 1919 world series. he is the president of the company where nick is working. he wants to bring gatsby in on a new real estate deal. classical conditioning is the study of behaviors that are____ , whereas operant conditioning studies behaviors that are____ What time is Christmas? the tendency for initial compliance with a small request to facilitate subsequent compliance with a larger request is known as the 2. Hanna and Metta are identical twins who attended elementary school through high school together. Hanna got a job after high school, and Metta got a job after graduating from college. Hanna earns $36,000 a year, and Metta earns $69,000 a year. Select the best explanation for this wage difference. A Hanna has less human capital than Metta. Metta has less human capital than Hanna B C. Hanna has received a compensating differential D Hanna is a member of a union I A man 1.5m in height standing on top of a vertical building 42m heigth .sees a truck some distance away ,at an angel of depression of 53.5.At what distance is the truck from the base of the building. Prince Corporation holds 75 percent of the common stock of Sword Distributors Inc., purchased on December 31, 20X1, for $2,160,000. At the date of acquisition, Sword reported common stock with a par value of $900,000, additional paid-in capital of $1,250,000, and retained earnings of $530,000. The fair value of the noncontrolling interest at acquisition was $720,000. The differential at acquisition was attributable to the following items:Inventory (sold in 20X2)$50,000Land70,000Goodwill80,000Total Differential$200,000During 20X2, Prince sold a plot of land that it had purchased several years before to Sword at a gain of $28,000; Sword continues to hold the land. In 20X6, Prince and Sword entered into a five-year contract under which Prince provides management consulting services to Sword on a continuing basis; Sword pays Prince a fixed fee of $92,000 per year for these services. At December 31, 20X8, Sword owed Prince $23,000 as the final 20X8 quarterly payment under the contract.On January 2, 20X8, Prince paid $280,000 to Sword to purchase equipment that Sword was then carrying at $320,000. Sword had purchased that equipment on December 27, 20X2, for $480,000. The equipment is expected to have a total 15-year life and no salvage value. The amount of the differential assigned to goodwill has not been impaired.At December 31, 20X8, trial balances for Prince and Sword appeared as follows:Prince CorporationSword Distributors Inc.ItemDebitCreditDebitCreditCash$52,700$40,000Current Receivables102,80090,400Inventory298,000220,900Investment in Sword Distributors2,812,250Land406,0001,211,000Buildings & Equipment2,570,0003,080,000Cost of Goods Sold2,193,000510,000Depreciation & Amortization184,00083,000Other Expenses1,363,000213,000Dividends Declared48,00018,000Accumulated Depreciation$1,098,000$410,000Current Payables93,200441,300Bonds Payable879,000190,000Common Stock91,000900,000Additional Paid-in Capital1,270,0001,250,000Retained Earnings, January 11,474,8001,300,000Sales4,877,0001,002,000Other Income or Loss93,00027,000Income from Sword Distributors153,750Total$10,029,750$10,029,750$5,493,300$5,493,300As of December 31, 20X8, Sword had declared but not yet paid its fourth-quarter dividend of $5,000. Both companies use straight-line depreciation and amortization. Prince uses the fully adjusted equity method to account for its investment in Sword.Required:a. Compute the amount of the differential as of January 1, 20X8.b. Verify the balance in Princes Investment in Sword Distributors account as of December 31, 20X8.c. Present all consolidation entries that would appear in a three-part consolidation worksheet as of December 31, 20X8. (If no entry is required for a transaction/event, select "No journal entry required" in the first account field. Round your answers to nearest whole dollar amount.) Identify a value of k that transforms f into g, where g(x) = f(x) + k. an a/c unit consumes 12,000 btu of electricity to remove 24,000 btu of heat from a house. what is the coefficient of performance (cop)? how much heat is rejected to the outdoors? if a bank doubles the amount of its capital and roa stays constant, what will happen to roe?