For 16-23, identify the atomic model that matches the description below. Some letters may be used more than once
A. Dalton's atomic model
B. Thomson's atomic model
C. Rutherford's atomic model
D. Bohr atomic model
E. Quantum mechanical model
16. In this model, you can only describe the most probable location of an electron.
17. This model describes the atom as indivisible and indestructible.
18. This model was the first to propose that an atom is mostly empty space.
19. This model describes an atom as a positive sphere on which electrons are embedded.
pls help

Answers

Answer 1

Answer:

16. Quantum Mechanical Model

17. Dalton's Atomic Model

18. Rutherford's Atomic Model

19. Thomson's Atomic Model


Related Questions

What is the more active nonmetal S or P


What is the more active nonmetal S or SE

Answers

There are various kind of elements that are present in periodic table. Some elements are meta, some are non metals, some are metalloids. Therefore, out of S or P, S is more reactive. Out of S or Se, S is more reactive.

What are on metals?

Non metals are the element that are found on the right side of the periodic table.

Features of non metals

Non metals are non conducting

Non metals are not lustrous

Non metals are not ductile and malleable

Non metals have high electronegativity.

Oxides of non metals are acidic in nature.

The non metals with high electronegativity values, are more reactive toowards the recation. Out of S or P, S is more reactive. Out of S or Se, S is more reactive.

Therefore, out of S or P, S is more reactive. Out of S or Se, S is more reactive.

To know more about non metals, here:

https://brainly.com/question/28650063

#SPJ1

PLEASE ANSWER THIS QUESTION (EXPLAIN AND CORRECTLY ANSWER) FOLLOW THE INSTRUCTIONS IN THE IMAGE

Answers

There can be release of radiations like gamma radiation. There can be emission of particles too like alpha particle. Therefore, the given nuclear decay reaction is balanced.

What is nuclear decay?

It is process in which the radioactive element releases particles or radiations. Alpha particles is ⁴₂He. Alpha particle is nothing but helium particle.

So, according to our questions Uranium-238 is undergoing alpha emission. The balanced reaction can be written as

²³⁸U₉₂ ²³⁴ [tex]\rightarrow[/tex]Th₉₀+⁴₂He

So, From above reaction we can see that the total mass on reactant side is equal to total mass on product side. So, this reaction is balanced.

Therefore, the given nuclear decay reaction is balanced.

To know more about nuclear decay, here:

brainly.com/question/21114779

#SPJ1

which of the following statements about cells and genes is false? multiple choice the sequencing of bases within a gene is of little significance. each chromosome contains hundreds to thousands of genes. each cell contains 23 pairs of chromosomes. our bodies are made up of about 260 different types of cells.

Answers

The statement about cells and genes that is false is a) the sequencing of bases within a gene is of little significance.

The sequence of bases is of major significance in an individual and hence option a is false. The sequences of bases in a gene help in the formation of specified proteins that carry out the functioning in an individual. The sequencing of the bases is also important as any change in the bases can cause the wrong proteins to be formed which might cause the ultimate death of an individual if a major kind of protein is not produced.

The sequence of bases also determines if there are chances of any disorder to occur in an individual due to the pattern of bases being changed.

The question will correctly be written as:

Which of the following statements about cells and genes is false? multiple choice

a) the sequencing of bases within a gene is of little significance.

b) each chromosome contains hundreds to thousands of genes.

c) each cell contains 23 pairs of chromosomes.

d) our bodies are made up of about 260 different types of cells.

To learn more about gene, click here:

https://brainly.com/question/1480756

#SPJ4

hello, please I need the solution of this question asap , thank you in advance

Answers

The distribution coefficient is a measure of how well a compound dissolves in one solvent relative to another. In this case, the distribution coefficient of caffeine in chloroform and water is 10, which means that caffeine is 10 times more soluble in chloroform than it is in water.

If the goal is to extract 90% of the caffeine present in one extraction, this means that 90% of the caffeine must be dissolved in the chloroform, while only 10% remains in the water. Since the distribution coefficient is 10, this means that the relative volume of chloroform-water must be 10 times larger than the relative volume of water.

In other words, if the relative volume of water is Vo/Vaq, the relative volume of chloroform-water must be 10 * (Vo/Vaq) in order to extract 90% of the caffeine. Therefore, the relative volume of chloroform-water that must be used is 10 * (Vo/Vaq) = 90% of the caffeine.

In horses, one which runs best in water (or in wet conditions) is called (WATER), and one which runs best in dry conditions is called (DRY). (WATER) is recessive to (DRY). A horse can also be either a trotter, which we will designate (GAIT) or a pacer, which we will designate (PACE). (PACE) is recessive to (GATE). We have mated two horses, a stallion named Halter-Man and a mare named Erlich-Mane. Halter-Man is a (WATER)(PACER), while Erlich-mane is a (DRY)(GAIT). One of Erlich-Mane’s parents was a (WATER)(PACER). What are the chances of Erlich-Mane and Halter-Man producing a (WATER)(GAIT) foal (that’s a baby horse, in case you didn’t know)?

Answers

Answer:

In order for a horse to be a (WATER)(GAIT), it must have two (WATER) alleles and two (GAIT) alleles. Both Halter-Man and Erlich-Mane have one (WATER) allele and one (GAIT) allele, so there is a chance that they could produce a (WATER)(GAIT) foal. However, without more information about the genotypes of Halter-Man, Erlich-Mane, and Erlich-Mane's parents, it is not possible to determine the exact chances of them producing a (WATER)(GAIT) foal.

6. For each skeleton equation below, classify the type of reaction as a synthesis decomposition, single replacement, double replacement, neutralization, or combustion reaction. Justify your classification. Then write the balanced chemical equation for each.

a) C4H10(g) + O2(g) → CO2(g) + H₂O(g)

b) Li(s) + N₂(g) → Li3N(s)

c) AgNO3(aq) + Na₂CrO4(aq)
NaNO3(aq) + Ag₂CrO4(s)

d) MgO(s)→ Mg(s) + O₂(g)

e) HI(aq) + KOH(aq) →KI(aq) +H₂O(l)

f) AlPO4(aq) + Mg(s) → Al(s) + Mg3(PO4)2(aq)

Answers

Answer:

a) combustion reaction

balanced equation: 2C4H10 + 13O2 → 8CO2 + 10H2O

b) synthesis reaction

balance equation: 6Li + N2 → 2Li3N

c) double replacement

balanced equation: 2AgNO3 + Na2CrO4 → 2NaNO3 + Ag2CrO4

d) decomposition

balanced equation: 2MgO → 2Mg + O2

e) double dispalcement

balanced equation: HI + KOH → KI + H2O

f)  single displacement

2AlPO4 + 3Mg → 2Al + Mg3(PO4)2

Explanation (detailed):

a)

Word Equation: Butane + Dioxygen = Carbon Dioxide + Water

How to balance:

1- Label Each Compound With a Variable

Label each compound (reactant or product) in the equation with a variable representing the unknown coefficients.

aC4H10 + bO2 = cCO2 + dH2O

2- Create a System of Equations

Create an equation for each element (C, H, O) where each term represents the number of atoms of the element in each reactant or product.

C: 4a + 0b = 1c + 0d

H: 10a + 0b = 0c + 2d

O: 0a + 2b = 2c + 1d

3-Solve For All Variables

Use substitution, gauss elimination, or a calculator to solve for each variable.

(keep doing this for every equation)

if you have any questions feel free to ask ill be happy to answer

How many moles are in 1.08 x 10^26 atoms of He?

Answers

Answer: 179 mols

Explanation:

1 mole = 6.02 x 1023 atoms

Avogadro’s number: 6.02 x 1023

Use Dimensional Analysis to solve.

(1.08 x 10^26 atoms/1 mole) x (1 mole/ 6.02 x10^23) = (1.08x 10^26)/(6.02x 10^23) = 179.4019934

179 moles

There are 3 significant figures.

A voltaic cell is constructed based on the following pair of half-reactions. identify the components in the cell below. ag+(aq)+1e- rightarrow ag(s) cd2+(aq)+2e- rightarrow cd(s) write the balanced equation for the cell reaction. (includes states and charges.)

Answers

A voltaic cell is constructed based on  ag+(aq)+1e- rightarrow ag(s) cd2+(aq)+2e- rightarrow cd(s) , the balanced equation for the cell reaction.  Cd(s) +2 Ag* (aq)⇒2 Ag(s) + Cd2+ (aq)

Ag* (aq) + e-  →→Ag(s                      E° +0.7996 V

Cd²+(aq) + 2e¯→→Cd(s)              E° = -0.40V

So, the cell potential is calculated as follows:

E° cell = E° cathode - E°anode

For the reaction to be spontaneous, the E should be postive, thatis cell

greater than 0.

Thus, E°cathode-E°anode>0

E° cathode > E° anode

So, the value of volatic  cell potential will be more for the cathode.

Here, the E° is more for Ag+ (aq) | Ag(s) and less for Cd2+ (aq) |Cd(s). Therefore, Ag* (aq)| Ag(s) acts as a cathode and Cd²+ (aq) | Cd(s)

acts as an anode.

Add the two half-reactions as follows:

2 Ag* (aq) + 2e→→2 Ag(s)

Cd(s) —Cd²+(aq) + 2e

Cd(s)+2 Ag* (aq)2 Ag(s)+Cd2+ (aq)

Therefore, the balanced equation is as follows:

Cd(s) +2 Ag* (aq)-2 Ag(s) + Cd2+ (aq)

A voltaic cell is constructed based on the following pair of half-reactions. identify the components in the cell below. ag+(aq)+1e- rightarrow ag(s) cd2+(aq)+2e- rightarrow cd(s) write the balanced equation for the cell reaction. (includes states and charges.?

Learn more about voltaic cell here:

https://brainly.com/question/1370699

#SPJ4

How much energy (in kJ) is gained by iron when a 24.6 g sample is heated from 23.0°C to 99.8°C. The specific heat capacity of iron is 0.387 J/(g*°C)

Answers

Answer:

7.31 x 10⁵ kJ

Explanation:

To find the energy gained by the iron sample, you need to use the following equation:

Q = mcΔT

In this equation,

-----> Q = energy (J)

-----> m = mass (g)

-----> c = specific heat capacity (J/g°C)

-----> ΔT = T₂ - T₁ = change in temperature (°C)

T₂ represents the final temperature and T₁ represents the initial temperature. After you calculate the value of "Q", you need to convert the energy from joules (J) to kilojoules (kJ).

Q = ? J                                  c = 0.387 J/g°C

m = 24.6 g                         ΔT = 99.8°C - 23.0°C = 76.8°C

Q = mcΔT                                                     <----- Equation

Q = (24.6 g)(0.387 J/g°C)(76.8°)                  <----- Insert values

Q = 731 J                                                       <----- Multiply

1,000 J = 1 kJ

   731 J                  1 kJ
--------------  x  -------------------  =  7.31 x 10⁵ kJ
                          1,000 J

indicate polar bonds for acetone. draw a vector representing the direction of polar bonds starting from the cross.

Answers

Among Acetone, butane, and propanol except for butane, the other two compounds possess polar bonds.  

Polar bonds are when one end of a molecule has a positive charge and the other end has a negative charge. Butane has no polar bonds because its atoms have the same electronegativity.

Acetone has a polar bond because the oxygen atom has a higher electronegativity than the carbon and hydrogen atoms, creating a charge difference between them.              

Propanol has two polar bonds. The oxygen atom has a higher electronegativity than the hydrogen and carbon atoms, creating a charge difference between them.

Additionally, the hydrogen atoms are slightly more electronegative than the carbon atom, creating a second charge difference within the molecule. This charge difference is what makes the polar bonds in propanol.

The image attached explains the polar bonds in each compound

To know more about electronegativity, click below:

https://brainly.com/question/18258838

#SPJ4

industrial non-metallic mineral resources do not include: group of answer choices sulfides salts fertilizers diamonds

Answers

industrial non-metallic mineral resources do not include Diamond

Non-Metallic is Metallic minerals are minerals that contain metal elements in their natural state. Metal substances are not found in non-metallic minerals. A new product is formed when metallic minerals are melted. In the case of non-metallic minerals, such a process yields no new product. Nonmetallic minerals are a category of chemical components that, once melted, yield no new products. Soil, small stones, limestone, terra cotta, and marble are instances of nonmetallic minerals. Non-metallic minerals are composed of chemical elements that lack the properties of a metal.

Learn more about Diamond here:

https://brainly.com/question/7074677

#SPJ4

A student combines a solution of NaCl(aq) with a solution of AgNO3(aq), and a precipitate forms.
Which of the following is the balanced net ionic equation for the formation of the precipitate?Ag+(aq)+Cl−(aq)→AgCl(s)

Answers

The balanced net ionic equation for the formation of the precipitate is Ag⁺(aq) + cl⁻ --> Agcl(s)

Given ,   Nacl(aq) + AgNO₃(aq )  --> ?

since,

   Nacl(aq) + cl⁻(aq) + Ag⁺(aq) + NO₃⁻(aq) --> Na⁺(aq)+NO₃⁻(aq)+ Agcl(s)

Net ionic equation is , Ag⁺(aq) + cl⁻ --> Agcl(s) .

Ionic equations are chemical equations in which electrolytes in aqueous solution are described as dissociated ions.

Example: 1) Sodium chloride(aq) + Silver nitrate(aq) → Silver chloride(s) + Sodium nitrate(aq) >>Ag+(aq) + Cl-(aq) → AgCl(s) 2) Sodium(s) + Hydrochloric acid (aq) -> sodium chloride (aq) + hydrogen (g)

Learn more about  ionic equation here : https://brainly.com/question/13879496

#SPJ4

43
1 point
When a physical change in á sample occurs, which of the following does NOT change?
volume
mass
shape
composition
Previous

Answers

When a physical change in a sample occurs, composition of sample does not change.

What are physical changes?

Physical changes are defined as changes which affect only the form of a substance but not it's chemical composition. They are used to separate mixtures in to chemical components but cannot be used to separate compounds to simpler compounds.

Physical changes are always reversible using physical means and involve a change in the physical properties.Examples of physical changes include melting,boiling , change in texture, size,color,volume and density.Magnetism, crystallization, formation of alloys are all reversible and hence physical changes.

They involve only rearrangement of atoms and are often characterized to be changes which are reversible.

Learn more about physical changes,here:

https://brainly.com/question/17931044

#SPJ1

a multifaceted synthetic route to functional polyacrylates by trans-esterification of poly(pentafluorophenyl acrylates)

Answers

true,a multifaceted synthetic route to functional polyacrylates by trans-esterification of poly(pentafluorophenyl acrylates).

polyacrylate, any of a class of synthetic resins derived from the polymerization of acrylic esters. Polyacrylates are used primarily in paints and other surface coatings, adhesives, and textiles because they can be formed into plastic materials with notable clarity and flexibility using certain methods. They are strong and flexible, allowing for the creation of solid products with a supple texture. It is a large compound that cannot pass through the skin's barrier and has been shown to be safe for cosmetic use. Polyacrylate, also known as Acrylate polymers, is a type of polymer that is commonly referred to as a plastic. Transesterification is the process of exchanging the organic group R′′ of an ester with the organic group R' of an alcohol in organic chemistry. The addition of an acid or base catalyst frequently catalyses these reactions. Other enzymes, particularly lipases, can also be used to carry out the reaction.

Learn more about polyacrylate here:

https://brainly.com/question/16038578

#SPJ4

hydrogen or delayed, under-bead cracking becomes a concern when welding steels with which of the following minimum carbon content?

Answers

When welding steels have 0.30% of the required carbon content or more, premature or premature, under-bead cracking becomes an issue.

Describe hydrogen.

Methane, often known as natural gas, may be replaced with hydrogen, a clean fuel. It is the most prevalent chemical element and is thought to make about 75% of the universe's mass. Numerous hydroxyl group may be found in water, plants, animals, and, of course, people here on earth.

Why does hydrogen cost so much?

Hydrogen is more difficult to transport, store, and deliver to the place of use compared to other fuels because it has a lower energy density per unit volume compared to other fuels.

To know more about Hydrogen visit:

https://brainly.com/question/28937951

#SPJ4

The complete question is-

Hydrogen or delayed, under-bead cracking becomes a concern when welding steels with which of the following minimum carbon content?

0.30%

0.15%

0.50%

0.45

amino acid addition to a growing chain happens at the [ select ] and [ select ] (consider only the formation of a peptide bond and not other steps such as translocation)
1. for the first blank, is it a C terminal / N terminal?
2. Do they require GTP/ ATP/ or none of them?

Answers

Amino acid addition to a growing chain happens at the C terminal and ATP is required.

Proteins are made up of substances called amino acids. Proteins and amino acids are the components of life. Amino acids are the byproducts of the digestion or breakdown of proteins. Amino acids are used by the human body to create proteins that benefit the organism. Two ATP molecules are needed for amino acid activation, two more for peptide bond formation and ribosome translation, as well as an additional ATP molecule or so for error correction and the synthesis of sequences that are lost during protein maturation, in order to add an amino acid to a growing peptide chain.

Want to know more about amino acids visit the link which is given below;

https://brainly.com/question/14583479

#SPJ4

Which species in the reaction below is being reduced?

H2O(g) + CO(g) → H2(g) + CO2(g)

Answers

Answer:

Therefore, H2O is being reduced, while CO is being oxidized.

Explanation:

In a chemical reaction, a species that gains electrons is being reduced, while a species that loses electrons is being oxidized.In the reaction given, H2O is gaining electrons, while CO is losing electrons.

A solution is prepared by adding 0.10 mol of potassium acetate, KC2H3O2, to 1.00 L of water. Which statement about the solution is correct?
It is basic
It is acidic
It is neutral

Answers

The statement that is true regarding the solution prepared by adding 0.10 mol of potassium acetate to 1.00 L of water is that it is acidic (option B).

How to calculate pH?

pH refers to the measure of the acidity or alkalinity of a solution. It can be calculated by using the following expression:

pH = - log {H}

Where;

H = hydrogen ion concentration

The concentration of the acetate solution must first be calculated by dividing the number of moles by its volume as follows:

Molarity = no of moles ÷ volume

Molarity = 0.10 mol ÷ 1L = 0.1M

pH = - log {0.1}

pH = 1

1 indicates that the solution is acidic, hence, option B is correct.

Learn more about pH at: https://brainly.com/question/14116906

#SPJ1

fill in the blank. the minimum daytime temperature typically occurs ___ the time of maximum outgoing earth energy.

Answers

Minimum daytime temperature typically occurs at sunrise, the time of maximum outgoing earth energy.

When is the minimum daytime temperature?

The minimum temperature occurs in the early morning whereas maximum temperature of the day occurs in the afternoon.

The lowest temperature is recorded diurnally, monthly, seasonally, or annually. Daily air temperature minima is recorded by screen minimum thermometer.

Mean minimum temperature is the long-term average daily minimum air temperature observed during a month and over the year. Lowest temperature (°C) is the lowest recorded temperature observed at the site.

Frigid zone receives less amount of sun rays therefore the temperature in this zone is very low and the climate is usually very cold.

To know more about minimum daytime temperature, refer

https://brainly.com/question/1447361

#SPJ4

the presumptive definition of driving under the influence in florida is having a blood alcohol content (bac) of .08.

Answers

True. The presumptive definition of Driving Under the Influence in Florida is having a Blood Alcohol Content (BAC) of .08.

True. In Florida, it is illegal to operate a motor vehicle with a blood alcohol content (BAC) of .08 or higher. This is known as driving under the influence (DUI). The legal limit for DUI in Florida is .08.

If a driver is found to have a BAC of .08 or higher, they can be arrested for DUI. Florida also has a Zero Tolerance Law for drivers under 21, meaning that any BAC .02 or higher can lead to an arrest for DUI.

For more questions like DUI click the link below:

https://brainly.com/question/29771200

#SPJ4

Complete question:

The presumptive definition of Driving Under the Influence in Florida is having a Blood Alcohol Content (BAC) of .08. true or false

Suppose 6 M HCl is substituted for the 3 M HCl in a procedure. What would be the consequence of this substitution?

Answers

If 6 M HCl is substituted for the 3 M HCl in a procedure, the concentration of the acid will be doubled.

This could have several consequences, depending on the specific procedure. In general, doubling the concentration of the acid will increase the rate of any reaction that involves the acid, so the reaction could proceed more quickly or with greater intensity than it would with the 3 M HCl.

In addition, the increased concentration of HCl could cause the reaction to become more acidic, so other components of the reaction may be affected as well. Finally, the increased concentration of HCl could increase the risk of hazards, such as burns, if proper safety precautions are not taken.

For more questions like HCL click the link below:

https://brainly.com/question/29847167

#SPJ4

Changing gloves often will minimize the spread of chemicals. To properly remove gloves, first, ____, and then, ___. Then insert ___ between the interior edge of the second glove and the skin, and remove the second glove.grasp the exterior of one glove with a gloved hand, peel the first glove, a bare finger

Answers

Pull the glove inside out as you peel it away from your body. Peel one glove away from your body and grab it by the wrist on the outside. Avoid touching your exposed skin.

Describe chemicals.

Any material with a known composition is a chemical.

How to take off your gloves:

Grab one glove's palm just above your wrist. Turning the glove inside out, carefully remove it.

Hold the glove in the palm of the hand that is still wearing gloves.

The glove must be pulled off from the inside out.

After taking off your gloves and before handling any surfaces or items, always wash your hands.

To know more about chemicals click on the link below:

https://brainly.com/question/13145357

#SPJ4

examine the plot of the volume of a sample of gas versus temperature at three different pressures. select all the correct statements derived from and/or related to this graphical presentation.

Answers

The temperature at which the gas could have zero volume is called absolute zero. It is a hypothetical condition where all the curves meet at a point at V= 0 and T becomes -273.15°C.

The plot of the volume of a sample of gas versus temperature at three different pressures is a graphical representation of the ideal gas law.

As the temperature of the gas sample increases, the pressure increases, and the volume of the gas sample increases as well.

However, the rate at which the volume of the gas sample increases is different at the three different pressures. At higher pressures, the volume increases more quickly than at lower pressures, indicating that the gas sample is more compressible at higher pressures.

This can be seen in the plot as the curves for the three different pressures diverge. Additionally, the plot also shows that the volume of the gas sample increases more quickly at higher temperatures.

This is because the kinetic energy of the gas molecules increases with temperature, allowing them to move more freely, thus increasing the volume of the gas sample.

To know more about ideal gas law, click here:

https://brainly.com/question/27870704

#SPJ4

For aldol reactions that are not favored, the reaction could proceed backwards: the aldol product, upon treatment with base, reverts to the carbonyl compounds it would have formed from in aldol condensation. That is known as "retro-aldol" reaction. Select ALL carbonyl compounds that would result in the following retro-aldol reaction. ?

Answers

In this retro synthesis the following two reactant would be involved. [SEE in attachement]

A reaction in which a β-hydroxy carbonyl compound decomposes into an aldehyde or ketone, plus another carbonyl compound. The formal reverse of the aldol reaction.

The stage of an aldol condensation known as dehydration is also reversible in the presence of acid and base catalysts. Therefore, many, -unsaturated carbonyl compounds break into smaller aldehydes or ketones when heated with aqueous solutions of strong acids or bases; this reaction is known as the retro-aldehyde reaction. The aldol reaction is reversible in the presence of acid or base catalysts, and the beta-hydroxy carbonyl products may transform back into the initial aldehyde or ketone reactants. These aldol products are fully stable and isolable chemicals in the absence of such catalysts.

To learn more about catalysts visit:https://brainly.com/question/28813725

#SPJ4

1. in this experiment, why 3-sulfolene was used instead of 1,3-butadiene? explain thoroughly for full credit.

Answers

Starting with solid 3-sulfolene and then breaking it down was simpler than doing it with gaseous 1,3-butadiene. Maleic anhydride, a dienophile, reacts with the diene to produce 4-cyclohexene-cis-dicarboxylic anhydride.

What is sulfolene ?

A cyclic organic compound with a sulfone functional group is known as sulfolene or butadiene sulfone. It is a crystalline, odorless, white solid that can be stored forever and dissolves in various organic solvents as well as water. The substance is utilized as a butadiene source.

Sulfolane is a common industrial solvent that is used for cleaning natural gas and extracting aromatic hydrocarbons from hydrocarbon mixtures.

Sulfolane, a dipolar aprotic sulfone solvent, is comparable in physicochemical qualities to other dipolar aprotic solvents as DMSO, NMP, DMF, and DMAC. Sulfolane (anhydrous) has the highest freezing point and highest boiling point among the solvents in Table 1 at 28.4 °C.

Thus, solid 3-sulfolene and then breaking it down was simpler than doing it with gaseous 1,3-butadiene.

To learn more about sulfolene, follow the link;

https://brainly.com/question/29854277

#SPJ1

One mole of aluminum and one mole of manganese oxide are placed in a reaction vessel, and the following reaction occurs:
2 Al(s) + 3 MnO(s) → Al2O3(s) + 3 Mn(s)
Which one of the following statements is true?
a.) 1.0 mole of Mn will be produced.
b.) 2.0 mole of Al2O3 will be produced.
c.) 1.0 mole of Al will be left over.
d.) 2.0 mole of MnO will be left over.
e.) Al is the limiting reactant.
Please show work!

Answers

One mole of aluminum and one mole of manganese oxide are placed in a reaction vessel, the correct option is  a.) 1.0 mole of Mn will be produced.

The reaction is given as follows :

2Al + 3MnO  --->   Al₂O₃  +   3Mn

if One mole of aluminum react with one mole of manganese oxide  then,

moles of Al = 0.5 mol

moles of MnO = 0.33

here it is clear that Mn is the limiting reagent, therefore formation of the product is depends on the ,MnO.

the moles MnO = moles of Mn

thus ,  1.0 mole of Mn will be produced by 1 mole of the MnO.

To learn more about moles here

https://brainly.com/question/9584025

#SPJ4

Compound X has the molecular formula C9H19Cl, and when treated with KOH in ethanol, 3 total products are obtained. Which of the following is compound X?

Answers

The reaction that treated with KOH in ethanol is explained by the E2 Elimination.

Compound has the molecular formula C9H19Cl and when treated with KOH, ethanol is obtained. haloalkanes that on reaction with a base form an alkene as the major product 2-chloro-2,6-dimethylheptane and 3-bromo-2,6-dimethylheptane respectively. On reaction with base, both the compounds form 2,6-dimethylhept-2-ene as major product via E2-elimination. This major product is decided by Zaitsev's rule. The alkene reacts with one mole H2 to form 2,6-dimethylheptane via addition reaction. Reaction with HCl occurs via Markovnikov addition, chlorine group is added to second carbon and 2-chloro-2,6-dimethylheptane is formed again. Therefore,  2-chloro-2,6-dimethyheptane and  3-bromo-2,6-dimethylheptane.

To learn more about E2 Elimination please visit:

https://brainly.com/question/18510324

#SPJ4

27.) Which Bronsted-Lowry acid has the strongest conjugate base?
HF, KA = 6.8 * 10 ^ -4
C6H5COOH, KA = 6.3 * 10 ^ -5
HNO2, KA = 4.0 * 10 ^-4
HCOOH, KA = 1.8 * 10 ^-4
HBrO, KA = 2.3 * 10 ^ -9

Answers

The Bronsted-Lowry acid that has the strongest conjugate base is HBrO, with the smallest Ka value of 2.3 * 10⁻⁹.

The correct option is E.

What are Bronsted-Lowry acids?

Bronsted-Lowry acids are substances that donate a proton in a reaction.

When Bronsted-Lowry acids donate protons, the substance formed is called a conjugate base. The conjugate base is able to accept a proton to form the Bronsted-Lowry acid.

For weak acids, dissociation into ions is not complete. Hence, the strength of weak acids is given by their acid dissociation constant, Ka.

The higher the Ka value of an acid, the stronger will be the acid.

However, Bronsted-Lowry acids that have large Ka values produce weak conjugate bases.

Hence, the Bronsted-Lowry acid that has the strongest conjugate base will have the smallest Ka value.

Learn more about Bronsted-Lowry acids at: https://brainly.com/question/12377772

#SPJ1

When naming organic compounds, there are strict rules regarding punctuation. 1. A comma is used to separate two numbers. 2. A hyphen is used to separate a number from a letter. Add hyphens and commas to this name as appropriate. 233trimethylhexane

Answers

After adding hyphens and commas to this name as appropriate. 233trimethylhexane is 2,3,3-trimethylhexane.

There are strict punctuation rules for naming organic compounds. A comma is used to separate two numbers. A hyphen is used to separate numbers and letters. Rewrite the name of this connection, using dashes and commas as necessary.

The first step in naming organic compounds is to choose the longest continuous chain of carbon atoms. This may or may not be linear. Longer sentences and phrases have stricter rules for using commas. If there are more than two adjectives they should be separated by commas. Similarly, more complex clauses and phrases are more likely to absolutely require commas between them.

Learn more about Naming organic compounds here:- https://brainly.com/question/1594044

#SPJ4

did tlc analysis of the aldol addition and condensation reactions suggest that starting materials were completely consumed? briefly explain. g

Answers

An aldol condensation is a condensation organic reaction whereby an enol or an enolate ion reacts with a carbonyl compound (from a ketone or aldehyde) to form a β-hydroxyaldehyde or β-hydroxyketone or more specifically an aldol reaction.

The reason why you can observe starting material and product in the tlc analysis is that the product ( which you obtained from a hydrogenation reaction) should be less polar than the source from which reaction starts.

TLC is a simple, quick, and inexpensive procedure that gives the chemist a quick answer as to how many components are in a reaction.

TLC is also used to support the identity of a compound in a mixture when the Rf of a compound is compared with the Rf of a known compound.

TLC or Thin Layer Chromatography is the type of analysis in which a small amount of the mixture to be analysed is spotted near the bottom of this plate.

This suggests that in aldol reactions, the starting material were analysed in TLC and during this analysis that material was completely consumed.

To know more about TLC, refer: https://brainly.com/question/13795068

#SPJ4

Other Questions
Company X recently detected some strange textmessages being sent between customers. Theybelieve that these coded text messages are insupport of criminal activities. They want to be able toautomate the detection and escalation of thesemessages to help avoid crime. The text messageseems to be a string of random alphanumericcharacters followed by a symbol (the last threecharacters of the text message), but on closeridentification they notice that there are palindromeswithin the text that correlate to spurious activity. Apalindrome is a word, phrase, or sequence thatreads the same backward as forward.The challenge is to identify these palindromes andassign a score. What we have noticed is thefollowing: In their scenario, a valid palindrome is definedas having three or more characters in sequenceand can overlap each other in the sequence.When there are two or more palindromes athreat should be detected. The score can be calculated as the sum of thelength of all valid palindromes.The cardinality of the score can be measured asfollows: 1-10 - Possible 11-40 - Probable11-40 - Probable 41-150 - Escalate Otherwise - IgnoreAs an analyst, you have been tasked to take the textmessages presented and write a programme that willpredict what your manager should do.Constraints 1 All text messages will be followed by a threecharacter symbol According to bush, who are the two sides in this conflict? FILL IN THE BLANK. there are many rdbms query tools we can use. those query tools include crosstab queries,___queries, parameter queries, and queries specific to sql apush what was the goal of the ku klux klan under the leadership of former confederate general nathan bedford forrest in 1866? assume the support at b is a roller. point c is located just to the right of the f = 8-kip load. product users/service receivers can benefit from hfe design of product/service systems as it ensures well-being and performance in terms of: The last three letters of a name can tell a lot about a particle! For each of the name endings below, give a general description of what type of ion or particle would be expected to have that ending (cation, monatomic anion, polyatomic anion, metal element, and/or nonmetal element).Have the instructor check your answers above, and initial here: _____________ If M= 2,000, P= 2.25, and Y= 6,000, what is velocity? a. 6.75. b. 3.00. c. 1.33. d. 1.50. which intervention should the nurse include in the plan of care for a client with leukocytosis? compare the frequency of an electromagnetic wave with the frequency of the vubrating charge that produces the wave discuss the measurement in detail and explain how you could use the search coil oscilloscope to measure the current passing through the large coil. The music box Theatre was built to showcase the owner's review during the 1920s.who was he?Murray boxIrving BerlinRichard Rogers Miss hart You can spend at most $3.50 at a market. Apples cost $0.40 each, and pears cost $0.65 each. Let x be numbers of apples and y be numbers of pears. Write an inequality that represents the numbers of apples and pears you can buy. Is (3,4) a solution of the inequality? ammoniagas and oxygengas react to form nitrogengas and watervapor. suppose you have of and of in a reactor. calculate the largest amount of that could be produced. round your answer to the nearest . FILL IN THE BLANK. a company might not want to consider___as a means of entry into a foreign market because it is generally the most costly method from a capital investment standpoint. when retailer's and brands sharing the costs ofand marketin advertising g, this is referred to as [ ] advertising work out the surface area In the following sentence, what figurative language does Shakespeare In the corrupted currents of this world Offence's gilded hand may shove by justice;a. Personificationb. Metaphorc. Similed. Hyperbole An ____ is a secure network that uses the Internet and Web technologies to connect intranets of business partners so communication between organizations is possible. Journalizing, adjusting, adjusted trial balance Harrisons Repair Service shows opening balance for some accounts on 01 January 20X1: Cash: $36,000; Accounts Receivable: 60,500; Prepaid Rent: $2,400; Supplies: $2,500; Equipment: $13,900; Accumulated depreciation - Equipment: $3,150; Accounts Payable: $2,780; Notes Payable: 16,000; Unearned service revenue: 6,120; Share capital: 86,915; Retained Earnings: 15,335; Dividends: 15,000.The following transactions in January were:January 1 Paid the monthly rental fee, $790.1 Made the monthly payment to Apple Company, $1,700 in order to decrease AccountsPayable.6 Purchased additional repair supplies on credit from Pineapple Company, $1820.15 Received cash for repair service performed, $2,950.20 Paid cash for an advertisement in the local newspaper, $370.23 Paid Pineapple Company on account, $1,20030 Collected payment for repair fees earned, $7,460.30 Recorded a dividend paid to stockholders, $8,100.RequiredA, Prepare journal entries to record the January transactions.B, Using the following information, record adjusting entries in the general journal and prepare the T- accounts for all accounts 1. One month of rent has expired. The rental policy is valid in one year starting from the first day of November 20X0.2. The inventory of unused repair supplies is $1,5203. The estimated depreciation on repair equipment is $350.4. Accrued one-month interest expense on Note Payable that will be paid on February 1 (Borrowing Note was in 6-month; annual interest rate is 6%).5. Accrued salaries for 2 employees at the end of the month, payment for each person is $5006. Service Revenue still unearned at the end of the period is $3,6757. Service revenue earned but not billed is $1,800C. Prepare an adjusted trial balance from above T-accounts