How many different chlorinated products
are based in the following reaction.
CH3CH2CH2CH3 + Cl2 heat

How Many Different Chlorinated Productsare Based In The Following Reaction.CH3CH2CH2CH3 + Cl2 Heat

Answers

Answer 1

Answer: if I’m not mistaken it would be 8

Explanation:

Answer 2

Answer:

2

Explanation:

:)


Related Questions

If a particular ore contains 56.3 % % calcium phosphate, what minimum mass of the ore must be processed to obtain 1.00 kg k g of phosphorus?

Answers

Answer:

34.44 kg

Explanation:

First we convert 1.00 kg of phosphorus (P) into moles, using its molar mass:

1.00 kg ÷ 32 kg/kmol = 0.03125 kmol P

Then we convert 0.03125 kmoles of P into kmoles of Ca₃(PO₄)₂:

0.03125 kmol P * [tex]\frac{2kmolCa_3(PO_4)_2}{2kmolP}[/tex] = 0.0625 kmol Ca₃(PO₄)₂

Now we calculate the mass of 0.0625 kmoles of Ca₃(PO₄)₂:

0.0625 kmol Ca₃(PO₄)₂ * 310.18 kg/kmol = 19.39 kg

Finally we calculate the required mass of the ore, using the definition of content percentage:

% content = Mass of calcium phosphate / mass of ore * 100 %56.3 % = 19.39 kg / mass of ore * 100%Mass of Ore = 34.44 kg

A student is titrating 50ml of 2.5M HI with 1.23M NaOH. How many milliliters of base are added to reach the
equivalence point?

Answers

Answer:

101.6ml

Explanation:

Using the formula;

CaVa = CbVb

Where;

Ca = concentration of acid (M)

Cb = concentration of base (M)

Va = volume of acid (ml)

Vb = volume of base (ml)

Based on the information as follows:

Ca = 2.5M

Cb = 1.23M

Va = 50ml

Vb = ?

Using CaVa = CbVb

2.5 × 50 = 1.23 × Vb

125 = 1.23Vb

Vb = 125/1.23

Vb = 101.6ml

what are the compounds that cause acid rain?​

Answers

Answer:

Explanation:

Its a chemical reaction that begins when compounds like sulfur dioxide and nitrogen oxides are released into the air. These substances  rise  high into the atmosphere in which they mix and react with water, oxygen, and other chemicals to form more acidic pollutants.

Answer:

Explanation:

Acid rain is caused by a chemical reaction that begins when compounds like sulfur dioxide and nitrogen oxides are released into the air. These substances can rise very high into the atmosphere, where they mix and react with water, oxygen, and other chemicals to form more acidic pollutants, known as acid rain.

An electric kettle uses electrical energy to boil water. Energy from the electricity is transferred to the water, heating it up. An electric ice maker also uses electrical energy, but it freezes water to form ice. Since energy can’t be created or destroyed, and water loses potential energy when it freezes to form ice, what happens to the energy put into the ice maker and the energy released by the water?

Answers

Answer:

Since energy can’t be created or destroyed, and water loses potential energy when it freezes to form ice. The energy remains electrical but then changes to kinetic when Enough energy is released.

Explanation:

The excess electrical energy gained by water during ice forming process is removed as potential energy to maintain law of conservation of energy.

According to the principle of conservation of energy, energy can neither be created nor destroyed but can transformed from one form to energy.

The electrical energy used by the ice maker to freeze water works on the same principle of conservation of energy.

The electrical energy absorbed the water is used to lower the temperature of the water in order to form ice by removing heat from the water in form of potential energy. This happens to maintain the principle of conservation of energy.

Thus, the excess electrical energy gained by water during ice forming process is removed as potential energy to maintain law of conservation of energy.

Learn more about conservation of energy here: https://brainly.com/question/166559

Calculate the value of ΔG° at 25°C for the formation of POCl3 from its constituent elements,

P2 (g) + O2 (g) + 3Cl2 (g) --> 2POCl3 (g)

A. -606.2 kJ/molrxn

B. +1108.7 kJ/molrxn

C. -1108.7 kJ/molrxn

D. +606.2 kJ/molrxn

Answers

The correct answer is

C. -1108.7 kJ/mol rxn

From the table values, the standard Gibbs free energy change for the formation of POCl₃ is -1108.7 kJ/mol

What is Gibbs free energy ?

We can calculate ΔG° for the reaction using the following formula:

ΔG° = ΣnΔG°f(products) - ΣnΔG°f(reactants)

where ΔG°f is the standard Gibbs free energy of formation for each compound and n is the stoichiometric coefficient of each compound in the balanced chemical equation.

We can look up the values of ΔG°f for each compound in tables of thermodynamic data. At standard conditions (25°C and 1 atm pressure), the values are:

ΔG°f (POCl₃) = -558.9 kJ/mol

ΔG°f (P₂) = 0 kJ/mol

ΔG°f (O₂) = 0 kJ/mol

ΔG°f (Cl₂) = 0 kJ/mol

Plugging these values into the formula, we get:

ΔG° = (2 mol)(-558.9 kJ/mol) - (1 mol)(0 kJ/mol) - (1 mol)(0 kJ/mol) - (3 mol)(0 kJ/mol)

ΔG° = -1117.8 kJ/mol

Therefore, the correct option  is C. -1108.7 kJ/molrxn. Note that this answer differs slightly from the calculated value because the given choices are rounded to one decimal place.

Find more on Gibbs energy:

https://brainly.com/question/29753417

#SPJ2


Using the Lewis dot structures of magnesium and oxygen, predict the ionic formula

Answers

Answer:

(edit: nvm I figured it out, here is the answer)

Explanation:

Ions exists bound together in ionic formulae by electrostatic attraction then the ionic formula exists MgO.

What is meant by Lewis dot structures?

The diagrams known as Lewis structures, also referred to as Lewis dot formulas, Lewis dot structures, electron dot structures, or Lewis electron dot structures, depict the interactions between the atoms in a molecule as well as any lone pairs of electrons that may be present.

A chemical compound comprehended as an ionic compound in chemistry exists one that contains ions bound together by the electrostatic forces named as ionic bonding. The molecule exists often neutral despite containing both positively and negatively charged ions, or cations and anions. Ions exists bound together in ionic formulae by electrostatic attraction.

Magnesium and oxygen:

Cation [tex]$=\mathrm{Mg}^{2+}$[/tex]

Anion [tex]$=\mathrm{O}^{2-}$[/tex]

Net charge = + 2 - 2 = 0

Formula = MgO

Therefore, the ionic formula exists MgO.

To learn more about ionic compound refer to:

https://brainly.com/question/2687188

#SPJ2

Calculate the number of molecules in 14.3 mol H2O.

Answers

Answer:

I don't get it

Explanation:

please explain more about question

PLEASE HELP, DUE AT 12:00

Answers

1. A 2. D 3. C 4. B are the answers

what is a major crack in the earth's surface?

Answers

Answer:

A crack in earth's crust is called a fault also known as a "fracture"

A crack in the earth's crust is called a fault.
Faults are also referred to as fractures.

Question 2 (1 point)
An object's gravitational force depends primarily on the object's
a
density
mass
b
oc
momentum

Answers

Answer: An object's gravitational force depends primarily on the object's mass.

Explanation:

According to the Universal law of gravitation, every object whether is it is having large r small mass tends to exert a force on every other object, therefore this force is known as gravitational force.

Formula to calculate gravitational force is as follows.

[tex]F = \frac{G \times m_{1} \times m_{2}}{r^{2}}[/tex]

where,

F = Gravitational force

G = Gravitational constant = [tex]6.674 \times 10^{-11} m^{3}/kg s^{2}[/tex]

[tex]m_{1}[/tex] = mass of object 1

[tex]m_{2}[/tex] = mass of object 2

r = distance between the centers of the objects

Therefore, it means that gravitational force of an object primarily depends on an object's mass.

Thus, we can conclude that an object's gravitational force depends primarily on the object's mass.

does the moon really change shape? why

Answers

The Moon doesn't emit (give off) light itself, the 'moonlight' we see is actually the Sun's light reflected off the lunar surface. So, as the Moon orbits the Earth, the Sun lights up different parts of it, making it seem as if the Moon is changing shape.

Magnesium nitride, Mg3N, undergoes a thermo decomposition reaction to form magnesium metal and nitrogen gas.

a. True
b. False

Answers

Answer:

a. True

Explanation:

Magnesium nitride, Mg₃N, is a binary salt. Upon heating, it decomposes into magnesium metal and nitrogen gas. The unbalanced equation is:

Mg₃N(s) ⇒ Mg(s) + N₂(g)

We can balance it with the trial and error method. First, we will balance N atoms by multiplying Mg₃N by 2.

2 Mg₃N(s) ⇒ Mg(s) + N₂(g)

Then, we get the balanced equation by multiplying Mg by 6.

2 Mg₃N(s) ⇒ 6 Mg(s) + N₂(g)

Which of the following indicates that a chemical equation is balanced?
a. The numbers of atoms of each element are the same on both sides of the equation.
b. All of the coefficients are the same.
C. The numbers of molecules on each side of the equation are equal.
d. The sums of the coefficients on each side of the equation are equal.

Answers

d. because to balance an equation all the elements have to have the same number

Kantahan moko sa lobby ml tayo babae 11 years old mayhem folow me 908723751 Mobile Legends Bang bang​

Answers

Answer:

hi which language is this???

I can't understand

Answer:

Filipino hello pari omsim

a transverse wave moves a medium at an abtuse angle to the wave , true or false ?​

Answers

Answer:

True! A transverse wave does move a medium at an obtuse angle to the wave!!

Answer:

False

Explanation:

TRUE or FALSE: The only way to see a recessive trait is to inherit 2 recessive
alleles.

Answers

Answer:

false it's more than two

2. Acceleration is______
proportional to mass,

Answers

Answer:

Inversely

Explanation:

The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.

When of glycine are dissolved in of a certain mystery liquid , the freezing point of the solution is lower than the freezing point of pure . On the other hand, when of ammonium chloride are dissolved in the same mass of , the freezing point of the solution is lower than the freezing point of pure . Calculate the van't Hoff factor for ammonium chloride in .

Answers

The given question is incomplete. The complete question is:

When 282. g of glycine (C2H5NO2) are dissolved in 950. g of a certain mystery liquid X, the freezing point of the solution is 8.2C lower than the freezing point of pure X. On the other hand, when 282. g of ammonium chloride are dissolved in the same mass of X, the freezing point of the solution is 20.0C lower than the freezing point of pure X. Calculate the van't Hoff factor for ammonium chloride in X.

Answer:  the van't Hoff factor for ammonium chloride is 1.74

Explanation:

Depression in freezing point is given by:

[tex]\Delta T_f=i\times K_f\times m[/tex]

[tex]\Delta T_f=T_f^0-T_f=8.2^0C[/tex] = Depression in freezing point  

[tex]K_f[/tex] = freezing point constant = ?

i = 1 ( for non electrolyte)

m= molality

[tex]8.2^0C=1\times K_f\times \frac{\text{mass of solute}}{\text{molar mass of solute}\times \text{weight of solvent in kg}}[/tex]

Weight of solvent (X)= 950 g = 0.95 kg

Molar mass of solute (glycine) = 75.07 g/mol

Mass of solute (glycine) = 282 g

[tex]8.2^0C=1\times K_f\times \frac{282g}{75.07g/mol\times 0.95kg}[/tex]

[tex]K_f=2.07[/tex]

ii) [tex]20.0^0C=i\times \times \frac{\text{mass of solute}}{\text{molar mass of solute}\times \text{weight of solvent in kg}}[/tex]

Weight of solvent (X)= 950 g = 0.95 kg

Molar mass of solute (ammonium chloride) = 53.49 g/mol

Mass of solute (ammonium chloride) = 282 g

[tex]20.0^0C=i\times 2.07\times \frac{282g}{53.49g/mol\times 0.95kg}[/tex]

[tex]i=1.74[/tex]

Thus the van't Hoff factor for ammonium chloride is 1.74

to find the mass in g of 3 moles Al .

Answers

Answer:

81 gm

Explanation:

The mass of 1 mole is 27 gSo, Mass of 3 moles of Aluminium would be 3 × 27 = 81 gm

Thus mass of 3 Moles of Aluminium is 81 gm.

Scientist use models of the solar system to

1 avoid the use of incorrect data

2 prevent duplication of their ideals

3 help explain their ideas

4 make theories non-testable

Answers

i believe it is 3, help explain their ideas.

Match the solutions to the descriptions of the freezing points.a. One mole of the ionic compound Na3PO4 dissolved in 1000 g H2O b. One mole of the ionic compound CuSO4 dissolved in 1000 g H2O c. One mole of the nonelectrolyte C6H12O6 dissolved in 1000 g H2O1. Highest freezing point 2. Intermediate freezing point 3. Lowest freezing point

Answers

Explanation:

Depression in Freezing point

= Kf × i × m

where m is molality , i is Van't Hoff factor, m = molality

Since molality and Kf remain the same

depression in freezing point is proportional to i

i= 2 for CuSO4 ( CuSO4----------> Cu+2 + SO4-2

i=1 for C2h6O

i= 3 for MgCl2 ( MgCl2--------> Mg+2+ 2Cl-)

So the freezing point depression is highest for MgCl2 and lowest for C2H6O

so freezing point of the solution = freezing point of pure solvent- freezing point depression

since MgCl2 has got highest freezing point depression it will have loweest freezing point and C2H6O will have highest freezing point

How many hydrogen atoms can be bonded to one carbon atom?
O A. 3
O B. 1
O C. 2.
O D. 4

Answers

Answer:

O D. 4

Explanation:

A carbon atom is an element that can be found in the atomic number 6th of the periodic table. It electronic configuration is 1s² 2s² 2p². It is a tetravalent and non metallic compound. In its outermost structure, Carbon needs four additional valence electrons to complete its octet structure. That is why hydrogen with only one electron can be bonded to one carbon atom in four different places making the carbon element obtain a tetrahedral shape.

7
State two signification of melting?​

Answers

The two liquids are different and so the melting points are different only because one represents an intermediate stage. It was a melting-point suppression effect, just like salt and ice, but it was much larger than anyone on the team had thought possible.

match the molecular shapes to the correct Lewis structures


trigonal pyramid
trigonal planar
bent
tetrahedral
linear

Answers

Answer:

Match up correct answers:

1) trigonal planar

2) tetrahedral

3) trigonal pyramid

4) linear

Explanation:

(correct answers on portal and edmentum users)

Hope I was helpful, have a great day and good luck :)

AlH₃ - trigonal planar

CH₂F₂ - tetrahedral

PH₃ - trigonal pyramidal

O₃ - bent

What is a Lewis structure?

The valence shell electrons in a molecule are depicted in an extremely simplified manner by a Lewis Structure. It is used to demonstrate how the electrons in a molecule are positioned around particular atoms. Electrons are shown as dots or, in the case of a bond, as a line connecting the two atoms.

How do you determine the molecular shape?Depict the Lewis Structure.Determine if the electron groups are in bond pairs or are lone pairs by counting the number of electron groups. Keep in mind that lone pairs and bonds are both included in electron groups!The electron-group geometry is named. (Specify if it is octahedral, tetrahedral, trigonal-bipyramidal, or linear.)The molecular geometry is determined by examining the locations of the surrounding atomic nuclei. (Count the number of lone pairs)

Learn more about molecular geometry here:

https://brainly.com/question/7558603

#SPJ2

what is chemical name of ghee​

Answers

Answer. Chemical formula of ghee: (C17H33 Coo)3 C3H5 • Chemical Reaction: (C17H31Coo)3 C3H5 + 3H2 (C17H33 Coo)3 C3H5

The total pressure in a tank is filled with a mixture of gases : Oxygen, Helium, and Argon is 15.3 atm. The P(He) = 3.2 atm, P(O) = 7.4 atm, what is the P(Ar) in the tank?

Answers

Answer:

4.7 atm

Explanation:

From the question given above, the following data were obtained:

Total pressure (P) = 15.3 atm

Pressure of Helium, P(He) = 3.2 atm

Pressure of Oxygen, P(O) = 7.4 atm

Pressure of Argon, P(Ar) =?

The pressure of Argon, P(Ar) in the tank can be obtained as illustrated below:

P = P(He) + P(O) + P(Ar)

15.3 = 3.2 + 7.4 + P(Ar)

15.3 = 10.6 + P(Ar)

Collect like terms

15.3 – 10.6 = P(Ar)

4.7 = P(Ar)

P(Ar) = 4.7 atm

Therefore, the pressure of Argon, P(Ar) in the tank is 4.7 atm

In a rush, a student only measured the mass of the empty beaker once before beginning
the experiment and one more time after the entire experiment was finished. The mass of
the empty beaker was found to be 0.123g less at the end of the experiment. What
happened?

Answers

Answer:

The student measured the cup and got an incorrect answer

Explanation:

because he was in a rush.

According to the following reaction, how many grams of
hydrobromic acid are needed to form 24.7 grams of bromine?

hydrobromic acid (aq) —>hydrogen (g) + bromine (1)

…grams hydrobromic acid

Answers

Answer:

25.1 g

Explanation:

Step 1: Write the balanced decomposition reaction

2 HBr(aq) ⇒ H₂(g) + Br₂(l)

Step 2: Calculate the moles corresponding to 24.7 g of Br₂

The molar mass of Br₂ is 159.81 g/mol.

24.7 g × 1 mol/159.81 g = 0.155 mol

Step 3: Calculate the moles of HBr needed to produce 0.155 moles of Br₂

The molar ratio of HBr to Br₂ is 2:1. The moles of HBr needed are 2/1 × 0.155 mol = 0.310 mol.

Step 4: Calculate the mass corresponding to 0.310 moles of HBr

The molar mass of HBr is 80.91 g/mol.

0.310 mol × 80.91 g/mol = 25.1 g

If only 0.186 g of Ca(OH)2 dissolves in enough water to give 0.230 L of aqueous solution at a given temperature, what is the Ksp value for calcium hydroxide at this temperature?

Answers

Answer:

[tex]Ksp=5.20x10^{-6}[/tex]

Explanation:

Hello there!

In this case, according to the solubility equilibrium of calcium hydroxide:

[tex]Ca(OH)_2\rightleftharpoons Ca^{2+}+2OH^-[/tex]

Whereas the equilibrium expression is:

[tex]Ksp=[Ca^{2+}][OH^-]^2[/tex]

It is firstly necessary to calculate the molar solubility given the grams and volume of the dissolved solute:

[tex]s=\frac{0.186g/(74.09g/mol)}{0.230L}=0.0109M[/tex]

Now, according to the Ksp expression, we plug in s as the solubility to obtain:

[tex]Ksp=(s)(2s)^2\\\\Ksp=(0.109)(2*0.0109)^2\\\\Ksp=5.20x10^{-6}[/tex]

Regards!

The Ksp value will be "5.20×10⁻⁶".

According to the solution equilibrium,

[tex]Ca(OH)_2 \rightleftharpoons Ca^{2+}+2OH^-[/tex]

Now,

The molar solubility will be:

→ [tex]s = \frac{\frac{0.186}{74.09} }{0.230}[/tex]

     [tex]= 0.0109 \ M[/tex]

hence,

The Ksp value will be:

→ [tex]Ksp = (s)(2s)^2[/tex]

By substituting the values,

          [tex]= (0.109)(2\times 0.0109)^2[/tex]

          [tex]= 5.20\times 10^{-6}[/tex]

Thus the above approach is right.

Learn more about temperature here:

https://brainly.com/question/23773843

pls help i need help help

Answers

Answer:

and is capillaries

Explanation:

hope it helps

Other Questions
In what ways can theenvironment impact the traits of an organism? Please help with 19 and 20 find domain and range 6 members of the Benton family are going to their school's Community Day. They have a coupon for $4.50 off their total. If they pay $40.50 for all their tickets, how much does one ticket cost without the coupon? What is a fishbone diagram used for?A. Analyzing the causes of a problemB. Identifying problems.C. Organizing resources needed to solve a problem.D. Prioritizing solutions to a problem. Cora bought 90 feet of cable for $.25.20. She needs 40 more feet. If the unit price is the same, how much will she pay for the extra 40 feet of cable? Pls help!!!Graph (see next page for graph paper grid)Using the data from the Coal Production Table, create a graph of coal usage in each region overthe years. The x-exis should be years, and the y-axis should be coal production. Use a differentsymbol or color to represent each region. Remember to include titles and labels.Scan or take a picture of your graph and submit it with your assignment.AnalysisChanges over time are called trends. You can see on the graph a downward trend in theAppalachian and Interior regions and an upward trend in the Western region.Try predicting future coal production. Using a ruler, draw the lines for each region. Go beyond2011. Draw the line with the same pattern it follows on the graph. The extension of the lines isbased on what you predict will happen with coal production.OIRESdia1 Questions1. How much coal will be produced in the year 2020 for each region?2. What trend would you predict for the next ten years for each region?.3. If people keep using coal in the same way, scientists say there may be enough coal reservesto last 200 to 300 years. Does your graph show trends that match what scientists say? Whatkinds of factors might cause them not to match?4. Can you think of any problems that could come from using only 15 years of data to predicttrends for the next 100 years? Explain your answer. How could you prevent some of theseproblems? Suppose that you are a prison warden. What if a group of incarcerated individuals calling themselves the Sons of Purple Flower and claiming to be a religious organization requested a special diet when the moon is full as part of their First Amendment rights? How would you determine whether you must grant these requests NEEDED ASAP the dropdown menu is the same for the rest of the (select) boxes 2COOH How many of each element is present in the following formula? What is the only graph below that has a Hamiliton Path? 29) The Northern states circumvented the new Fugitive Slave Law by a) shutting down the Underground Railroad b) passing personal liberty lawsc) publishing popular literature that condemned Southern slavery d) returning run-away slaves to their original owners Distribute in a sentence Help please right now True or false 8.Churchill & Mussolini started an alliance to fight off German Approximate the value of 5(pi)A)Slightly more than 20B)Slightly less than 15C)Slightly more than 15D)Slightly less than 20 Solve please I really need this answer so if you k ow it please solve it thank u What is the wavelength? Given f(x) = 2x - 1 and g(x) = 4x + 6, which operation completes the statement?f(x) ___ g(x) = 8x^2 + 8x - 6i need to determine what math sign i have to use on the ____ the options are *,+,-, and the divide symbolthis is operations on functions!!! Short story having a hard time fitting in a new environment In the Pink Floyd album, The Wall, what is the full plot of the album A certain type of automobile battery is known to last an average of 1,150 days with a standard deviation of 40 days. If 100 of these batteries are selected, find the following probabilities for the average length of life of the selected batteries. (Round your answers to four decimal places.) A button hyperlink to the SALT program that reads: Use SALT. (a) The average is between 1,142 and 1,150. (b) The average is greater than 1,158. (c) The average is less than 950.