Answer:
[tex]d=7.77\times 10^{13}\ m[/tex]
Explanation:
We know that the speed of light is equal to [tex]3\times 10^8\ m/s[/tex]
We need to find how far the light travel in 3 days.
Speed of an object is equal to distance covered divided by time taken.
Also, 1 day = 86400 s
3 days = 259200 s
So,
[tex]d=vt[/tex]
[tex]d=3\times 10^8\times 259200\\\\d=7.77\times 10^{13}\ m[/tex]
So, the light will travel [tex]7.77\times 10^{13}\ m[/tex] in 3 days.
According to the Michaelis-Menten equation, when an enzyme is combined with a substrate of concentration s (in millimolars), the reaction rate (in micromolars/min) is
Answer:
The answer is "A"
Explanation:
Please find the complete question in the attachment file.
[tex]\to R(s)= \frac{As}{K+s}[/tex]
when the s in the approach, that is infinity R(s) tends
[tex]\to \frac{A}{\frac{K}{s}+1} \\\\ \to\frac{A}{0+1} \\\\ \to\frac{A}{1} \\\\ \to A[/tex]
Use what you have learned to match the parts of the
Someone help!!!!FAST
sentences.
The mantle
is both solid and molten.
The core
is the outermost layer.
The part that includes land and water
is called the crust.
The crust
is under the crust.
Answer:
the crust is the outermost layer
Explanation:
the mantle is under the crust, the core is the innermost layer
land and water.is for crust-mantle. contain semi-molten iron and nickel please make the question clear
Answer:
answer in picture
Explanation:
Energy from the Sun reaches Earth through
Convection
O radiation
conduction
all the above
Solar Radiation(Basically Radiation)
What is a factor that determines whether this energy is a renewable or nonrenewable resource
Answer:
Nonrenewable energy resources, like coal, nuclear, oil, and natural gas, are available in limited supplies. This is usually due to the long time it takes for them to be replenished. Renewable resources are replenished naturally and over relatively short periods of time
In Part III, the methyl orange indicator is used to monitor the equilibrium shifts of the acetic acid/acetate ion system. The methyl orange equilibrium established with water is Hmo(aq)(orange-red) H2O(l) H3O (aq) mo-(aq)(yellow). You compared the color of the solutions in three test tubes that initially contained 3 mL of 0.1 M acetic acid and a few drops of methyl orange indicator. In the first test tube, you added 1.0 M NaC2H3O2 drop wise. What color change was observed and what did this color change indicate about the shift in the methyl orange equilibrium
Answer:
See explanation
Explanation:
Let us look at the situation closely, the undissociated Hmo is red in colour while the mo^- is yellow in colour.
This means that an acidic solution will appear red while a basic solution will appear yellow in colour.
NaC2H3O2 is a basic salt. When it is introduced, the acetate ion pulls a proton from water forming CH3COOH. CH3COOH is a weak acid and largely does not dissociate, it means that the undissociated acid remains in the solution leaving only the OH^- ions floating around thereby making the solution basic.
The colour of the system now changes to yellow.
Consider the equilibrium;
CH3COO^-(aq) + H2O(l) ------> CH3COOH(aq) + OH^-
Addition of NaC2H3O2 causes the equilibrium of this system to shift to the right.
The methyl orange water equilibrium also shifts towards the position where more mo^-(yellow) is produced.
PLZ HELP ASAP WILL GIVE BRAINLIST
2AlCl3 + 2Al + 3Cl2
If 20.0 g of aluminum chloride are decomposed, how many molecules of chlorine gas are produced?
A )6.63 x 1022 molecules CI
B )2.70 x 1023 molecules Cl2
C )1.35 x 1023 molecules Cl2
D )9.42 x 1023 molecules Cl2
Explanation:
Molar mass of AlCl3 = 133.34g/mol
Moles of AlCl3 used
= 20.0g / (133.34g/mol) = 0.150mol
Mole Ratio of AlCl3 to Cl2 = 2 : 3,
Moles of Cl2 produced
= 0.150mol * (3/2) = 0.225mol
We know that 1 mole of any gas has
6.023 * 10²³ molecules.
Hence, number of molecules in Cl2
= 0.225mol * (6.023 * 10²³/mol)
= 1.35 * 10²³ molecules. (C)
Today, ammonia is synthesized through a series of reactions (called the Haber-Bosch process) that take place between methane, air (which is four parts N2, one part O2), and potassium carbonate:
7 CH4(g) + 8 N2(g) +2 O2(g) + 17 H2O(g) + 7 K2CO3(s) ?? 16 NH3(g) + 14 KHCO3(s)
What is the equilibrium expression for the Harber-Bosch process?
Answer:
K = [NH₃]¹⁶ [KHCO₃]¹⁴ / [CH₄]⁷ [N₂]⁸ [O₂]² [H₂O]¹⁷ [K₂CO₃]⁷
Explanation:
The equation for the reaction is given below:
7CH₄(g) + 8N₂(g) +2O₂(g) + 17H₂O(g) + 7K₂CO₃(s) —> 16NH₃(g) + 14KHCO₃(s)
Equilibrium constant (K) =..?
Equilibrium constant, K for a reaction is simply defined as the ratio of the concentration of the products raised to their coefficient to the concentration of the reactants raised to their coefficient.
Thus, the equilibrium expression for the Harber-Bosch process for the synthesis of ammonia can be written as shown below:
K = [NH₃]¹⁶ [KHCO₃]¹⁴ / [CH₄]⁷ [N₂]⁸ [O₂]² [H₂O]¹⁷ [K₂CO₃]⁷
What is the iupac name of ch3ch(oh)so3na
Answer:
propane-1-ol.
is the ans.
ok
is the name
ok
How do I know I'm a fish eh sorry
GRADE 5 SCIENCE MYA-2020-2021
Testosters are testing the choict of light on a radiometer Team 1 finds that blue light makes the radiometer spin slower when a blue light is 35 centimeters (cm) away. To validate Team 1's test results, how must
Text with and that is 20 cm away
Test what that is 45 cm away
Test with a green light that is 40 cm away
Test with the light that is 35 cm away
Answer:
Test it with a blue light that is 45 cm away.
Explanation:
An atom has 81 electrons, 84 neutrons, and 82 protons. What element is this atom?
Answer:
Lead
Explanation:
The subatomic particles within an atom can be used to know the atom or element given.
Of particular interest is the number of protons within the atom.
The periodic table is based on the atomic number of atoms. This atomic number is the number of protons within an atomic space.
So; If we know the number of protons within an atom, we can know the element.
The number of protons given is 82, the element is therefore lead.
Answer:
The atomic number of polonium is 84. The atomic number lead is 82.
Explanation:
How did fossil records support the existence of a supercontinent?
Similar fossils provided evidence that a meteor hit Earth.
Similar fossils were found in different continents.
Fossil records showed how old the continents were.
Fossil records provided evidence that dinosaurs existed.
Answer:
B. Similar fossils were found in different continents.
Answer:
B. Similar fossils were found in different continents.
Explanation:
Is caffeine additive?
Explain
Answer:yes anything can be addictive
Explanation:
Answer:
While caffeine produces a small rise in dopamine, it does not cause the large surge that unbalances the reward circuits in the brain and is necessary for an addiction. So even though the word “addiction” is often used casually, caffeine is not addictive (scientifically speaking).
an unknown substance has a mass of 57.4 g and occupies a volume of 34.3 ml. what is the density in g/ml?
Answer:
1.6734 g\ml..hope it helps
If the oxidation state of H is +1 and O is -2, what is the oxidation state of C in C2H4O?
Answer:
-1
Explanation:
According to this question, the oxidation state/number of H and O in C2H4O is +1 and -2 respectively.
The oxidation state of carbon in the compound can be calculated thus:
Where;
x represents the oxidation number of C
C2H4O = 0 (net charge)
x(2) + 1(4) - 2 = 0
2x + 4 - 2 = 0
2x + 2 = 0
2x = -2
Divide both sides by 2
x = -1
The oxidation number of C in C2H4O is -1.
Explain what would happen to the air temperature at Riverdale School over the course of the
day if the groundwater system were used.
Answer:
Air temperature increases.
Explanation:
The air temperature at Riverdale School increases if the groundwater system were used because this system uses very huge amount of water than the other system. By using more molecules having the same temperature, the thing with more molecules has more total kinetic energy or thermal energy than the thing with fewer molecules so that's why air temperature of the school is increases.
What process forms an image in a mirror? Choices: A. absorbing light B. Reflecting light C. Refracting light D. Transmitting light
Answer
Using the law of reflection—the angle of reflection equals the angle of incidence—we can see that the image and object are the same distance from the mirror. This is a virtual image, since it cannot be projected—the rays only appear to originate from a common point behind the mirror.
Explanation:
Hope this helps someone
Experiments were done on a certain pure substance X to determine some of its properties. There's a description of each experiment in the table below. In each case, decide whether the property measured was a chemical or physical property of X, if you can. If you don't have enough information to decide, choose can't decide in the third column.
Property P: A small sample of X is dissolved in water. Drops of another solution, containing dissolved sodium hydroxide, are slowly added, and a pH indicator is used to determine when the sodium hydroxide has completely reacted with X. From the amount of sodium hydroxide needed, the value of P may be calculated.
Property D: A sample of X is carefully weighed and put inside a vented flask. Water is added to the flask until it just covers the sample, and the volume of sample and water is recorded. Then the sample is removed and the volume of water alone recorded. From the mass of the sample and the difference in volumes, the value of R may be calculated.
Property V: Sample of X is melted and put into a reservoir from which a very thin tube leads down. The rate at which X flows out of the tube is measured, and from this rate the value of V may be calculated.
Answer:
The property P measured, was a chemical property of X; its acidity
The property D measured, was a physical property of X; its density
The property V measured, was a physical property of X; it's viscosity probably.
Explanation:
1. The property V that was measured is the acidity of X. The acidity of X is a measure of the concentration of hydrogen ions present in it. When drops of another solution, containing dissolved sodium hydroxide, are slowly added, and a pH indicator is used to determine when the sodium hydroxide has completely reacted with X, the procedure determines the concentration of X that would neutralize the base, sodium hydroxide.
2. The property of X determined in the step is the density of X, a physical property. First the volume of X was determined by the displacement method. Then the density of X is calculated from its mass and volume.
3. Since during the determination of the property V, there was no alteration done to the chemical constitution of X, the property thus determined is a physical property. Melting of the sample is a physical change and likewise its flow rate through a very thin tube.
how many moles are there in 67.2 grams of h2
Answer: 33.3 moles
Explanation: 67.2 g H2 = 67.2/2.016 = 33.3 moles
3. What determines the frequency (color) of photons?
Thiamine hydrochloride (vitamin B1 hydrochloride, HC12- H17ON4SCl2) is a weak acid with Ka 5 3.4 3 1027. Sup- pose 3.0 3 1025 g of thiamine hydrochloride is dissolved in 1.00 L of water. Calculate the pH of the resulting solution. (Hint: This is a sufficiently dilute solution that the autoion- ization of water cannot be neglected.)
Answer:
pH = 6.76
Explanation:
Ka = 3.4x10⁻⁷; 3.0x10⁻⁵g
The molarity of the vitamin B1 -Molar mass: 327.268g/mol- solution is:
3.0x10⁻⁵g * (1mol / 327.268g) = 9.167x10⁻⁸M
The Ka expression is:
Ka = 3.4x10⁻⁷ = [H⁺] [B1-] / [B1]
Where B1- is the conjugate base of vitamin B1,
In equilibrium, the concentrations are:
[H⁺] = X
[B1-] = X
[B1] = 9.167x10⁻⁸M - X
Where X is reaction coordinate
Replacing:
3.4x10⁻⁷ = [X] [X] / [9.167x10⁻⁸M - X]
3.117x10⁻¹⁴ -3.4x10⁻⁷X = X²
3.117x10⁻¹⁴ -3.4x10⁻⁷X - X² = 0
Solving for X:
X = -4.15x10⁻⁷M. False solution. There is no negative concentrations.
X = 7.51x10⁻⁸MThat means from the equilibrium of vitamin B1, the [H⁺] = 7.51x10⁻⁸M
From the autoinoization of water:
[H⁺] = 1.0x10⁻⁷M
[H⁺] in the solution is:
1.0x10⁻⁷M + 7.51x10⁻⁸M = 1.751x10⁻⁸M
As pH = -log[H⁺]
pH = 6.76
chemistry
Definition in your own words. I will check if you got it from online.
Word:
Oxidizer
Answer:
oxidizer: one used to support the combustion of a rocket propellant
word: a single distinct meaningful element of speech or writing
Explanation:
Suppose that you are given a mixture of proteins with their properties provided in the following chart.
Isoelectric point PI Molecular weight
Protein A 4.1 80
Protein B 9.0 81
Protein C 8.8 37
Protein D 3.9 172
Choose one combination of techniques that can be used to isolate Protein B from Proteins A, C, and D.
a. gel filtration chromatography and ultracentrifugation
b. dialysis and ultracentrifugation
c. dialysis and ion exchange chromatography
d. ion exchange chromatography and gel filtration chromatography
Answer:
The correct option is d. ion exchange chromatography and gel filtration chromatography
Explanation:
The mixture contains proteins with different isoelectric points and molecular weights. Ion exchange chromatography separates the proteins with different electric charges, which depend on the isoelectric point. At certain pH of the aqueous medium, the proteins will have a certain electric charge and they will be retained differently in the stationary phase. Proteins A and D have similar isoelectric points (around 4.0) and maybe they cannot be efficiently separated by this method; the same occurs with protein B and C (with an isoelectric point around 9.0). To separate proteins A from D and protein B from C, it could be used gel filtration chromatography. This separation method is based on differences in molecular weights. So, at the end of the process, we will obtain the proteins A, B, C, D separated one from each other.
The gas carbon dioxide is a pure substance. Which of the following is true about carbon dioxide? (5 points)
Select one:
a. Carbon and oxygen are chemically bonded in it.
b. Carbon and oxygen retain their original identity in it.
c. It can be separated into carbon and oxygen using physical methods.
d. The proportion of carbon and oxygen is different in different samples of the gas.
Answer:
Carbon and oxygen are chemically bonded in it.
Explanation:
The other answer choices do not apply for compounds, but rather for mixtures instead.
calculate the number of atoms in 0.25 mole of uranium.
Answer: 0.25 mol × (6.02214 × 1023 /mol) = 1.5 × 10
Explanation: Hope that helps
Question 6 / 20
Which statement is always true about conservation of matter?
A. The mass of a system does not change during a chemical reaction
B. If a solid forms, the mass of a system increases
C. If a gas forms, the mass of a system decreases
D. The mass of a system changes when a substance changes from liquid to gas, but it does not change in
a chemical reaction
Select an answer
Back
Open notes navigator
Answer:
i gussss D is the answer may be
Answer:
A. The mass of a system does not change during a chemical reaction
Explanation:
Correct Answer
water is a unique material in that the density of the solid is lower than the density of the liquid (which is why ice forms at the top of a pond and why ice floats in our drinks). if the density for ice at 0C is .917g/mL and the density for water at 0C is .999 g/mL, what is the calculated free space (as %) for each of these materials. you will need to estimate the volume of water as the sum of 2 H atoms and 1 O atom with radii 37 and 66 pm respectively. note that you will also have to assume a quantity of water to perform this exercise
Answer:
% Free space in water = [tex]\frac{9.945* 10^{-7} }{1*10^{-6} }[/tex]×100 = 99.45%
% Free space in ice = [tex]\frac{9.98* 10^{-7} }{1*10^{-6} }[/tex]×100 = 99.8%
Explanation:
As given ,
Density for ice at 0⁰C = 0.917 g/ml
Density for water at 0⁰C = 0.999 g/ml
Radii of H atoms = 37 pm
Radii of O atoms = 66 pm
Now,
Consider 1 ml of water = 1 cm²
As , we know that mass of water in 1 cm² = 0.999 g
Moles of water = [tex]\frac{0.999}{18} = 0.056[/tex]
Volume of H₂O = 1.624×[tex]10^{-31}[/tex] m²
Now,
Volume occupied by water = 0.056×6.022×[tex]10^{23}[/tex]× 1.624×[tex]10^{-31}[/tex] m²
= 5.48×[tex]10^{-9}[/tex] m²
⇒Volume occupied by water = 5.48×[tex]10^{-9}[/tex] m²
Now,
Free space = 1×[tex]10^{-6}[/tex] - 5.48×[tex]10^{-9}[/tex] = 9.95×[tex]10^{-7}[/tex] m²
% Free space = [tex]\frac{9.945* 10^{-7} }{1*10^{-6} }[/tex]×100 = 99.45%
Now,
Consider 1 ml of ice = 1 cm²
S.I unit of ice = 1×[tex]10^{-6}[/tex] m²
As , we know that mass of water in 1×[tex]10^{-6}[/tex] m² = 0.917 g
Moles of ice = [tex]\frac{0.917}{18} = 0.012[/tex]
Volume of H₂O = 6.022×[tex]10^{23}[/tex] ×0.012
Volume of ice unit = [tex]\frac{4}{3} \pi (37*10^{-12})^{3} *2 + \frac{4}{3} \pi (66*10^{-12})^{3} = 1.624*10^{-31}m^{3}[/tex]
Now,
Volume occupied by water = 0.012×6.022×[tex]10^{23}[/tex]× 1.624×[tex]10^{-31}[/tex] m²
= 1.17×[tex]10^{-9}[/tex] m²
⇒Volume occupied by water = 1.17×[tex]10^{-9}[/tex] m²
Now,
Free space = 1×[tex]10^{-6}[/tex] - 1.17×[tex]10^{-9}[/tex] = 9.98×[tex]10^{-7}[/tex] m²
% Free space = [tex]\frac{9.98* 10^{-7} }{1*10^{-6} }[/tex]×100 = 99.8%
What are the correct products for the following reaction? ---->
K2SO4 + MgF2 ---->
Question 3 options:
2KF + MgSO4
F2SO4 + K2Mg
No reaction will occur
K2SO4 + F2Mg
Answer:
2KF+MgSO4
Explanation:
The correct product of the reaction above is 2KF + MgSO4.
What is a chemical reaction?A chemical reaction is a reaction in which the reactants or reacting substances react or combine together to produce the products.
Therefore, The correct product of the reaction above is 2KF + MgSO4.
Learn more about chemical reactions below.
https://brainly.com/question/11231920
#SPJ2
How was Bohr's atomic model different from those of previous scientists?
Answer:
Bohr placed the electrons in distinct energy levels. Rutherford described the atom as consisting of a tiny positive mass surrounded by a cloud of negative electrons. Bohr thought that electrons orbited the nucleus in quantized orbits. Also, rutherfords was just a hypothesis while Bhor took the time to make his an experiment
differences between selenium tellurium and polonium
Explanation:
Selenium and tellurium are rare elements, respectively, in order of crustal abundance. However, polonium, on account of its radioactive decay, is less abundant. The main source of selenium and tellurium is the anode slime deposited during the electrolytic refining of copper.
15.0 g of Fe and 25.0 g of sand are added to 250.0 g of water. a. Determine the percent mass of Fe, sand, and water in the mixture. b. Create a flow chart illustrating how you could separate each of the mixture’s components. c. Explain which step of the separation is likely to have the highest amount of error.
Answer:
A. percentage mass of iron = 5.17%
percentage mass of sand = 8.62%
percentage mass of water = 86.205%
B. (Iron + sand + water) -------> ( iron + sand) ------> sand
C. The step of separation of iron and sand
Explanation:
A. Percentage mass of the mixtures:
Total mass of mixture = (15.0 + 25.0 + 250.0) g =290.0 g
percentage mass of iron = 15/290 * 100% = 5.17%
percentage mass of sand = 25/290 * 100% = 8.62%
percentage mass of water = 250/290 * 100% = 86.205%
B. Flow chart of separation procedure
(Iron + sand + water) -------> separation by filtration using filter paper and funnel to remove water --------> ( iron + sand) -----------> separation using magnet to remove iron ------> sand
C. The step of separation of iron and sand by magnetization of iron will have the highest amount of error because during the process, some iron particles may not readily be attracted to the magnet as they may have become interlaced in-between sand grains. Also, some sand particle may also be attracted to the magnet as they are are borne on iron particles.