Find the supplementary angle (or supplement) to a 55º angle



30 PTSSSSSS IF YOU HELP ME GOOD, I WILL GIVE YOU BRAINLYEST BUT ANY FOOL ANSWERS WILL BE REPORTED

Friday's practice session was 3 and 153/896 hours longer than

To find out how much longer Friday's practice session was than Wednesday's, we need to subtract Wednesday's practice time from Friday's practice time.

Friday's practice time is 2 3/7 hours. To make it easier to subtract, we can convert this mixed number to an improper fraction:

2 3/7 = (2 × 7 + 3) / 7 = 17/7

Now we can add this to Wednesday's practice time, which is already in improper fraction form:

1 1/8 = (1 × 8 + 1) / 8 = 9/8

Adding these two fractions, we get:

17/7 + 9/8

To add these fractions, we need to find a common denominator. The smallest number that both 7 and 8 divide into is 56, so we can convert both fractions to have 56 as the denominator:

17/7 × 8/8 = 136/56

9/8 × 7/7 = 63/56

Now we can add the numerators:

136/56 + 63/56 = 199/56

This is the total practice time for both Wednesday and Friday. To find out how much longer Friday's practice session was than Wednesday's, we need to subtract Wednesday's practice time from this total:

199/56 - 9/8

To subtract fractions, we need to find a common denominator again:

199/56 - 9/8 = (199/56) × (8/8) - (9/8) × (7/7) = 1425/448 - 63/56

Now we can subtract the numerators:

1425/448 - 63/56 = 2841/896

This is the difference between Friday's practice time and Wednesday's practice time, expressed as an improper fraction. To convert this back to a mixed number, we can divide the numerator by the denominator:

2841 ÷ 896 = 3 with a remainder of 153

So the answer is Friday's practice session was 3 and 153/896 hours longer than Wednesday's practice session.

Learn more about subtraction here,

https://brainly.com/question/1927340

#SPJ1

To find the radius of the circle, we need to rewrite the equation of the circle in standard form, which is:

(x - h)^2 + (y - k)^2 = r^2

where (h, k) is the center of the circle and r is its radius.

To rewrite the given equation in standard form, we need to complete the square for both x and y terms:

x^2 - 12x + y^2 + 6y + 20 = 0

(x^2 - 12x + 36) + (y^2 + 6y + 9) = -20 + 36 + 9 (adding and subtracting appropriate terms to complete the square)

(x - 6)^2 + (y + 3)^2 = 25

Comparing this equation with the standard form, we see that the center of the circle is (6, -3) and the radius is sqrt(25) = 5.

Therefore, the radius of the circle is 5 units.

HOPE THIS HELPS!

If man travels "3-miles", turns left ,travel "6-miles", then turn left again travels "8-miles", then he is "7.8-miles" away from the starting point, No option is correct.

The man travel 3 miles straight, so we let the "starting-point" be (0,0),

So, the point after travelling 3 miles straight will be (0,3),

Next, he turns left and travels 6 miles(now facing downwards),

So, the coordinate becomes (6,3);

Next, he Turns left again(now facing right) and travels "8 miles" to the right .

So, the final-coordinate becomes (6, -5).

Now, we calculate the distance between the final point (6, -5) and the starting point (0,0) using the distance formula, which is the square root of the sum of squares of differences in "x" and "y" coordinates:

So, Distance = √((6-0)² + (-5-0)²),

⇒ Distance = √(36 + 25),

⇒ Distance = √61 ≈ 7.8 miles.

Therefore, The distance is approximately 7.81 miles, which is not present in any of the option, So, no option is correct.

Learn more about Distance here

https://brainly.com/question/28956738

#SPJ4

Answer:

To find the solution of the system of equation.

The intersection point is the solution of the system of equation in the graph.

(2,7) is the solution of the given system of equation.

The answer is, option A The solution is (2, 7) because the solution to the system must satisfy both equations simultaneously

Answer:

18.62π square inches

Step-by-step explanation:

To find the surface area of the cylinder, we need to find the area of each of its components and add them together. We can use the net of the cylinder to visualize its components and dimensions.

First, let's find the area of the top and bottom circles. We know the diameter of each circle is 3.8 inches, so the radius is half of that, or 1.9 inches. The formula for the area of a circle is A = πr^2, so:

A(top and bottom circles) = 2π(1.9 in)^2

= 2π(3.61 in^2)

= 7.22π in^2

Next, let's find the area of the curved surface of the cylinder. The height of the cylinder is labeled as 3 inches, which is also the height of the rectangle in the net. The length of the rectangle is the circumference of one of the circles, which is πd (where d is the diameter). So:

length of rectangle = π(3.8 in) = 11.96 in

The formula for the area of the curved surface of a cylinder is A = 2πrh, where r is the radius and h is the height. We can use the radius we found earlier and the height of 3 inches to calculate the area of the curved surface:

A(curved surface) = 2π(1.9 in)(3 in)

= 11.4π in^2

Finally, we can add the areas of the top and bottom circles and the curved surface to get the total surface area of the cylinder:

Total surface area = A(top and bottom circles) + A(curved surface)

= 7.22π in^2 + 11.4π in^2

= 18.62π in^2

Therefore, the surface area of the cylinder in terms of π is 18.62π square inches.

We need to integrate the function

y = 2x - x² with respect to x, from x = 0 to x = 2.

The graph of the function intersects the x-axis at x = 0 and x = 2.

So,

Area of region R = ∫[0,2] (2x - x²) dx

= [x² - (1/3)x³] from 0 to 2

= [2² - (1/3)(2)³] - [0² - (1/3)(0)³]

= 4/3

Now, let's find the equation of the line y = cx. Since the line passes through the origin (0,0), we have y = cx.

To find the value of c that divides the region R into two equal subregions, we need to find the value of x where the

area under the curve y = 2x - x² is equal to the area under the line y = cx.

∫[0,a] (2x - x²) dx = ∫[0,a] cx dx

[2x²/2 - x³/3] from 0 to a = [c/2 x²] from 0 to a

2a²/2 - a³/3 = c/2 a²

We multiply both sides by 6, we get:

12a² - 2a³ = 3ac

2a² - (1/3)a³ = (1/2)ac

2a - (1/3)a² = (1/2)c

c = (4a - (2/3)a²)/2

We know that the area under the line is equal to the area under the curve up to the point of intersection, we have:

∫[0,a] (2x - x²) dx = ∫[0,a] (cx) dx - ∫[a,2] (2x - x²) dx

2a²/2 - a³/3 = c/2 a² - 2a² + (8/3)a³ - 4a + (4/3)a²

10a³/3 - 7a² + 4a = 0

a = 0, 1.4105, -0.6172

The only value of a that is within the range 0 to 2 is a = 1.4105. Substituting this value into the equation for c, we get:

c = (4a - (2/3)a²)/2 = 1.636

Learn more about area under the curve at: https://brainly.com/question/15122151

#SPJ1

The length of each side is 2√6 cm.

We have,

Length of diagonal of square = 4√3 cm

Now, To compute the length of a side of a square Divide d by √2.

So, length of each side

= 4√3 / √2

= 4√6/ 2

= 2√6

Thus, the length of each side is 2√6 cm.

Learn more about Length of Diagonal here:

https://brainly.com/question/30891856

#SPJ1

The graph of the linear equation is on the image at the end.,

To graph a line, we need to find two points on the line and then connect them with a line.

Evaluating in x = 0 we will get.

y = (-2/5)*0 - 2 = -2

evaluating in x = 5

y = (-2/5)*5 - 2 = -4

Then we have the points (0, -2) and (5, -4)

And the graph of the linear equation can be seen in the image at the end.

Learn more about linear equations at:

https://brainly.com/question/1884491

#SPJ1

The way that data sets can be used to compare two data

When attempting to compare two sets of data, there are numerous ways one can utilize visual representations to help recognize similarities and variances between the two. Here are some common examples:

Measures of center: Data displays such as box plots or histograms can be employed to quickly display measures of central tendency – like the mean, median, and mode – then contrast them amongst the two datasets.

Measures of variability: To compare two collections of data in terms of their measures of variability – including range, interquartile range, and standard deviation

Trends: Scatterplots or line graphs can be used to discern trends among the data and observe distinguishing characteristics between the two sets.

Read more on data sets here:https://brainly.com/question/28168026

#SPJ1

Answer: 3.45meters

Step-by-step explanation:

To find the range of the length of pipe that the plumber can cut, we need to write an absolute value inequality that expresses the condition that the length of the pipe must be within 0.09 meters of the required length. Let's call the required length L.

The plumber can cut a pipe that is within 0.09 meters of the required length, so the length of the pipe must be between L - 0.09 and L + 0.09. We can express this as:

|3.36 - L| ≤ 0.09

To solve this inequality, we need to consider two cases: when 3.36 - L is positive and when it is negative.

Case 1: 3.36 - L ≥ 0

In this case, the absolute value of 3.36 - L is equal to 3.36 - L. So we can write:

3.36 - L ≤ 0.09

Solving for L, we get:

L ≥ 3.36 - 0.09

L ≥ 3.27

Therefore, if 3.36 - L is positive, the length of the pipe must be greater than or equal to 3.27 meters.

Case 2: 3.36 - L < 0

In this case, the absolute value of 3.36 - L is equal to -(3.36 - L), or L - 3.36. So we can write:

L - 3.36 ≤ 0.09

Solving for L, we get:

L ≤ 3.36 + 0.09

L ≤ 3.45

Therefore, if 3.36 - L is negative, the length of the pipe must be less than or equal to 3.45 meters.

Putting these two cases together, we get:

3.27 ≤ L ≤ 3.45

Therefore, the range of the length of pipe that the plumber can cut is between 3.27 meters and 3.45 meters.

Answer:

The perimeter of a semicircle is the sum of half of the circumference of the circle and its diameter. As the perimeter of a circle is 2πr or πd. So, the perimeter of a semicircle is 1/2 (πd) + d or πr + 2r, where r is the radius.

Thus, the probability that this song will be played on no more than two out of every four days is 35.60%.

Combination as well as permutation are two alternative strategies in mathematics to divide up a collection of components into subsets. The subset's components can be listed in whatsoever order when combined. The components of the subset usually listed in a permutation in a certain order.

Since this is a combination issue, we must first determine the combination of 4 select 2, and then multiply that result by the chance of each possible outcome:

Choose 2 from a combination of 4:

C(4, 2) = 4! / (2! * 2!) = 4*3/2 = 6

This figure indicates that there are 6 alternative ways that the 2 days we want to be allocated in the 4 days could be used.

The probability of every event is now:

2 days of song playback: (0.58)²

The song wasn't played for two days: (0.42)².

Hence, the final probability is

P = C(4,2) * (0.58)² * (0.42)²

P = 6 * (0.58)² * (0.42)²

P = 0.3560

Thus, the probability that this particular song will be played on no more than two out of every four days is 35.60%.

Know more about the combinations:

https://brainly.com/question/28065038

#SPJ1

If you are trying to predict Y scores from X scores, X is referred to as the a. predictor variable. Therefore, option a. predictor variable is correct.

The predictor variable, also known as the independent variable or explanatory variable, is a variable that is used to explain the changes or variations in another variable. In this case, the predictor variable (X) is used to predict the value of the dependent variable (Y).

For example, if you are trying to predict the score of a student on a test (Y) based on the number of hours they study (X), then the number of hours studied is the predictor variable. The predictor variable is what you manipulate or control to see its effect on the dependent variable. In other words, the predictor variable is what you believe influences the outcome variable.

It is important to note that the predictor variable does not necessarily cause changes in the dependent variable. There may be other variables at play that can affect the outcome variable. Therefore, it is important to consider other potential confounding variables in your analysis.

In summary, when trying to predict Y scores from X scores, X is referred to as the predictor variable. It is the variable that is manipulated to explain the changes in the dependent variable, Y.

for such more question on predictor variable

https://brainly.com/question/24275089

#SPJ11

The polynomial equation with roots -26, -2, and 4.39 is:

x³ + 15.22x² - 239.44x + 1049.44 = 0

The given root of 0.11 is not a root of this equation.

Any equation with a sum of terms that includes constant coefficients multiplied by one or more variables raised to a non-negative integer power constitutes a polynomial equation.

If the roots of a polynomial equation are -26, -2, and 4.39, then the factored form of the polynomial equation can be written as:

(x + 26)(x + 2)(x - 4.39) = 0

Expanding this equation gives us:

(x + 26)(x² - 2x - 8.78x + 8.78×2) = 0

Simplifying further, we get:

(x + 26)(x² - 10.78x + 38.44) = 0

Multiplying out the second factor, we get:

x³ - 10.78x² + 38.44x + 26x² - 277.88x + 1049.44 = 0

Combining like terms, we get:

x³ + 15.22x² - 239.44x + 1049.44 = 0

To know more about roots visit:

https://brainly.com/question/31109820

#SPJ1

Answer:

The possible radius and height for the inside of the cylinder that meets the constraints are r = 4 cm and h = 9.4 cm.

Step-by-step explanation:

The formula for the volume of a cylinder is V = πr^2h, where V is the volume, r is the radius, and h is the height. We want to find a radius and height that will give us a volume between 475 and 480 cubic centimeters, with a diameter between 8 and 10 centimeters. First, we’ll use the lower limits of the constraints: a volume of 475 cubic centimeters and a diameter of 8 centimeters. The diameter is 8 centimeters, so the radius is 4 centimeters. We can plug in these values to the formula for volume and solve for h: 475 = 3.14 x 4^2 x h 475 = 50.24h h = 9.44 So a possible radius and height for the inside of the cylinder that meets the constraints are: r = 4 cm and h = 9.4 cm.

The maximum height achieved by the rider is given by the equation above. You can calculate this value using the given measurements and plug them into the equation to find the maximum height.

What is statistics?

Statistics is a branch of mathematics that deals with the collection, analysis, interpretation, presentation, and organization of numerical data. It involves the use of methods and techniques to gather, summarize, and draw conclusions from data.

A. The two quantities you would measure for x and y are the time and height, respectively.

B. The equation that relates time and height for an object in projectile motion is given by:

y = y0 + v0y * t - (1/2) * g * t²

where:

y = vertical height at any time t

y0 = initial vertical height (in this case, the height of the ramp)

v0y = initial vertical velocity (in this case, the vertical velocity of the rider at the top of the ramp)

g = acceleration due to gravity (approx. 9.81 m/s²)

t = time elapsed since the rider left the ramp

To apply this equation to the given image, you can put the picture on a grid with the x-axis representing time and the y-axis representing height.

C. To find the maximum height, you need to determine the point at which the rider's height is greatest. From the plotted points, you can see that the maximum height occurs at the point where the curve reaches its apex. You can find this point by calculating the time at which the vertical velocity of the rider becomes zero (i.e., the highest point of the jump). This occurs at the peak of the curve, where the vertical velocity changes from positive to negative. To calculate this time, you can use the equation for vertical velocity in projectile motion:

v = v0y - g * t

where:

v = vertical velocity at any time t

v0y = initial vertical velocity (in this case, the vertical velocity of the rider at the top of the ramp)

g = acceleration due to gravity (approx. 9.81 m/s²)

t = time elapsed since the rider left the ramp

At the peak of the jump, the vertical velocity becomes zero, so we can set v = 0 and solve for t:

0 = v0y - g * t

t = v0y / g

Substituting this value of t into the equation for height, we can find the maximum height:

y = y0 + v0y * (v0y / g) - (1/2) * g * (v0y / g)²

y = y0 + (v0y² / 2g)

Therefore, the maximum height achieved by the rider is given by the equation above. You can calculate this value using the given measurements and plug them into the equation to find the maximum height.

To learn more about statistics from the given link:

https://brainly.com/question/28053564

#SPJ1

Once we have found the vertex, we can determine the maximum height achieved by the rider.

What is statistics?

Statistics is a branch of mathematics that deals with the collection, analysis, interpretation, presentation, and organization of numerical data. It involves the use of methods and techniques to gather, summarize, and draw conclusions from data.

To find the highest point the rider achieved on a jump, we need to measure the rider's height at different points during the jump.

A. The two quantities we would measure for x and y would be:

x: the horizontal distance the rider travels during the jump

y: the vertical height of the rider at different points during the jump

B. The equation that describes the rider's motion during the jump would be a quadratic equation in the form of:

y = ax² + bx + c

Where:

a is the coefficient of the quadratic term and represents the acceleration due to gravity

b is the coefficient of the linear term and represents the initial velocity of the rider

c is the constant term and represents the initial height of the rider

C. To find the maximum height, we need to find the vertex of the parabola that represents the rider's motion.

The vertex is the highest point on the parabola and is located at the point (-b/2a, c - b²/4a).

To find the vertex, we need to measure the rider's height at least two different points during the jump.

The two points should be on either side of the vertex to ensure that we have captured the shape of the parabola correctly.

hence, Once we have measured the rider's height at these two points, we can plug the values into the equation and solve for the vertex. Once we have found the vertex, we can determine the maximum height achieved by the rider.

To learn more about statistics from the given link:

brainly.com/question/28053564

#SPJ1

The inequality for "number t​ divided by 32 is at most 4. 25" is t/32 ≤ 4.25 and the solution is t ≤ 136

To write the word sentence as an inequality, we need to translate the words into mathematical symbols.

The phrase "a number t divided by 32" can be written as t/32. The word "is" can be translated as an equals sign, and "at most" can be translated as less than or equal to. Therefore, the word sentence "A number t divided by 32 is at most 4.25" can be written as:

t/32 ≤ 4.25

To solve the inequality, we can isolate the variable t by multiplying both sides by 32:

t ≤ 4.25 * 32

t ≤ 136

Therefore, the solution to the inequality is t is less than or equal to 136. This means that any value of t that is less than or equal to 136 will make the original inequality true. If t is greater than 136, then the inequality will be false.

To learn more about inequality click on,

https://brainly.com/question/22162185

#SPJ4

If owner asks you to change the method of estimating bad debts to a flat 3% of receivables, then you should carefully "evaluate request to change method of estimating bad-debts", "use prudent and analytical approach" and to communicate effectively with stake-holders.

As a "financial-advisor" for company, it is important to consider request of owner to change method of estimating "bad-debts" to a flat 3% of receivables, given the circumstances described.

(i) It is crucial to understand the reasons behind change in method of estimating bad debts.

In this case, the company is facing a "cash-crunch" and needs to borrow money from the bank, using accounts receivable as collateral.

The owner is aware that many of "accounts-receivable" are more than 90 days past-due, which results in net receivables equal to only 80% of total receivables,

It indicates that company is experiencing a higher level of delinquency in its accounts receivable, and the owner may be seeking a more conservative estimate of bad debts to reflect this situation.

(ii) A more prudent approach would be to conduct a thorough analysis of the company's accounts receivable, considering factors such as the aging of accounts, historical collection patterns, industry norms, economic conditions, and creditworthiness of customers.

This help in developing a more accurate and reliable estimate of bad debts that aligns with the company's specific circumstances.

(iii) it is important to communicate-effectively with owner and other relevant stakeholders, explaining reasons behind recommended method of estimating bad debts and the potential implications of using a flat percentage.

This can help in building transparency, trust, and confidence in the financial reporting process and decision-making of the company.

Learn more about Bad Debts here

https://brainly.com/question/30124512

#SPJ4

The exponential function f(x) = 2^x is given by the blue graph on the given graph.

The horizontal asymptote of a function is the value of f(x) as x goes to infinity, as long as this value is different of infinity.

The function in this problem is defined as follows:

y = 2^x.

Two relevant numeric values are given as follows:

Hence the function is represented by the blue graph.

The horizontal asymptote is of y = 0, as when x goes to negative infinity, y goes to zero.

More can be learned about exponential functions at https://brainly.com/question/2456547

#SPJ1

Answer:

D

Step-by-step explanation:

given a parabola in standard form

y = ax² + bx + c ( a ≠ 0 )

then the x- coordinate of the turning point ( vertex ) is

[tex]x_{vertex}[/tex] = - [tex]\frac{b}{2a}[/tex]

y = 2x² + 4x - 3 ← is in standard form

with a = 2, b = 4 , then

[tex]x_{vertex}[/tex] = - [tex]\frac{4}{2(2)}[/tex] = - [tex]\frac{4}{4}[/tex] = - 1

substitute x = - 1 into the equation for corresponding y- coordinate

y = 2(- 1)² + 4(- 1) - 3 = 2(1) - 4 - 3 = 2 - 7 = - 5

turning point = (- 1, - 5 )

Answer:

The Correct answer is D

(-1,-5)

Answer:

Any linear equation with a slope of 1.5

(examples:

Step-by-step explanation:

If two equations are parallel, their slopes are the same.

y=1.5x-6 is written in slope-intercept form, which is:

[tex]y=mx+b[/tex]

Where m is the slope, and b is the y-coordinate of the y-intercept.

Thus, looking at the equation y=1.5x-6, we can find that m=1.5.

This means that the slope is 1.5.

Think of any equation in this format that uses 1.5 as the slope. Here are a few examples:

The graphs of all of these equations are parallel to the graph of y=1.5x-6 because their slopes are the same.

You can write your own equation using a slope of 1.5.

The total rations will be: 0.75 times the number of meals.

A ration refers to the fixed portion of food or other goods allowed to each person in times of shortages.

In this context, If you decide to eat only 75% of each meal, that means you will consume 0.75 times the number of meals.

For example, if you originally had 100 meals, you will now have:

= 0.75 x 100

= 75 rations in total.

This approach allows to stretch your meals and make them last longer by rationing your food intake.

Read more about rations

brainly.com/question/2914376

#SPJ1

Answer: 14.325 years old

Step-by-step explanation:

Dylan is 11 3/4 you add 1 3/8 to get camdens age of 13 1/8 add 1 1/5 to get janes age of 14.325 or as a fraction is 573/40

Answer:

(x - 4)² + (y + 3)² = 4

Remember the circle formula:

(x - h)² + (y - k)² = r²

h = X center point  

k = Y center point

In this case your center point is (4,-3) and your radius is 2

If u plug everything in and simplify you should get this:

(x - 4)² + (y - (-3))² = 2²

(x - 4)² + (y + 3)² = 4

The spread of the data in the histogram is uneven or skewed to the right.

A histogram is a graphical representation of data used to display the distribution of values in a dataset, showing data in bins or intervals along the horizontal axis.

The data distribution in the histogram is uneven or tilted to the right. This suggests that there are fewer students who have gone water skiing less frequently (1 to 5 trips) and more students who have gone water skiing more frequently (11 to 15 trips). The frequency is greatest between 11 and 15 visits, which is reflected by the largest bar in the histogram.

In given problem, the skewed distribution of the given data shows that there are more no. of the students doing water-skiing regularly than those who are doing it less frequently.

This might imply that there is a group of students who are more experienced or enthusiastic about water skiing, and they have gone on more excursions than other students who have gone on less trips. It also implies that the majority of students fall within the 11 to 15 trip period, which might imply a common pattern or trend in the data.

Learn more about histogram here:

https://brainly.com/question/30664111

#SPJ1

The best description of the spread of the data is that it is skewed or unevenly distributed.

A histogram is a graphical representation of data used to display the distribution of values in a dataset, showing data in bins or intervals along the horizontal axis.

Based on the given histogram, the data is not evenly distributed across the five intervals. The majority of students have been water-skiing between 11 and 15 times, with a frequency of 5. There are fewer students who have been water-skiing between 16 and 20 times, with a frequency of 4, and even fewer students who have been water-skiing between 21 and 25 times, with a frequency of 3.

The spread of the data refers to how far apart the values in the dataset are from each other. In this case, the data is not evenly spread across the different intervals. The values in the dataset are more concentrated in the interval of 11 to 15, and less concentrated in the intervals of 1 to 5 and 21 to 25. This indicates that the majority of students have been water-skiing a similar number of times, while fewer students have been water-skiing either a lot or a little.

Therefore, the best description of the spread of the data is that it is skewed or unevenly distributed.

Learn more about histogram here:

brainly.com/question/30664111

#SPJ1

The complete question is:

A group of students was asked about the number of times they had been water-skiing. The data is shown in the histogram.

A histogram titled Water Skiing Trips. The x-axis is labeled Number of Times Water Skiing and has intervals of 1 to 5, 6 to 10, 11 to 15, 16 to 20, and 21 to 25. The y-axis is labeled Frequency and starts at 0 with tick marks every 1 units up to 6. There is a shaded bar for 1 to 5 that stops at 1, for 6 to 10 that stops at 2, for 11 to 15 that stops at 5, for 16 to 20 that stops at 4, and for 21 to 25 that stops at 3.

Which of the following best describes the spread of the data? Explain its meaning in this situation?

Using trigonometric functions, we can find the value of w to be = 9.688cm.

The right triangle's angle serves as the domain input value for the six fundamental trigonometric operations, which return a range of numbers as their output. The angle, expressed in degrees or radians, is the domain of the trigonometric function of f(x) = sin, also referred to as the "trig function," and its range is [-1, 1]. In terms of their domain and scope, the other functions are comparable. Algebra, geometry, and calculus all make extensive use of trigonometric functions.

Here in the question,

We have a right-angled triangle.

Basse of the triangle = 8√3cm.

It's an isosceles triangle.

So, cos45° = w/8√3

⇒ 0.70 = w/8√3

Cross multiplying:

⇒ w = 0.70 × 8√3

⇒ w = 9.688 cm.

Therefore, the measure of the length of the side w = 9.688cm.

To know more about trigonometric functions, visit:

https://brainly.com/question/6904750

#SPJ1

The volume of the bookshelf is 1/4 cubic units.

The amount of space a three-dimensional object occupies is measured by its volume.

A cubic unit, such as a cubic foot, cubic metre, or cubic metre is typically used to express it.

An object's volume can be calculated by figuring out how much space is contained within its boundaries. Depending on the shape of the object, different mathematical formulas can be used to accomplish this.

To calculate the volume of the bookshelf, we need to add the volumes of the two cubes together.

The length of one side cubed determines a cube's volume.

Since each cube has a side of (1/2), the volume of each cube can be calculated as:

(1/2)³ = 1/8

To get the total volume of the bookshelf, we can add the volumes of the two cubes:

1/8 x 2 = 1/4

To know more about cubes visit:

https://brainly.com/question/16642309

#SPJ1