FILL IN THE BLANK The _____stage of information technology planning outlines business processes that are central to achieving strategic goals and helps determine which ones could most benefit from information technology.

Answers

Answer 1

The business area analysis stage of information technology planning outlines business processes that are central to achieving strategic goals and helps determine which ones could most benefit from information technology.

What is Information Technology?

Utilizing hardware, software, services, and supporting infrastructure to manage and transmit information utilizing speech, data, and video is known as information technology. Data storage, retrieval, transmission, and sending are all part of the field of information technology, or IT.

The phrase "IT" is frequently used as a shorthand for computers and the networks that connect them, but it also refers to other means of information dissemination, such as television and mobile devices.

IT, or information technology, is the term used to describe the use of technology to an organization's business difficulties or to expedite and manage business processes.

To learn more about information technology, use the link given
https://brainly.com/question/26986135
#SPJ4


Related Questions

Question 9

Concerning IP address shortages, what is the most important difference between IPv4 and IPv6?
1 point

IPv6 addresses are simpler and therefore easier to remember than IPv4 addresses.

There are many, many more potential IPv6 addresses than IPv4 addresses.

IPv6 addresses are more secure.

It will be less expensive for a company to have multiple IPv6 addresses as compared to IPv4 addresses.

Answers

The most important difference between IPv4 and IPv6 is option b:there are many, many more potential IPv6 addresses than IPv4 addresses.

What is the  IP address  about?

IPv4 uses 32-bit addresses and can support a maximum of approximately 4.3 billion unique addresses. In contrast, IPv6 uses 128-bit addresses and can support a virtually unlimited number of unique addresses.

Therefore, This is important because the rapid growth of the internet and the increasing number of devices that are connected to it have led to a shortage of available IPv4 addresses. As a result, IPv6 was developed to address this shortage and provide a much larger pool of available addresses.

Learn more about  IP address  from
https://brainly.com/question/30018838

#SPJ1

your u.s.-based company has recently purchased an old office building where employees are being assigned to work. as you are setting up the employees' desktop computers, you come to one location where the nearest wall outlet has only two prongs. all of the metal-enclosed desktop computers have three-prong cords. which of the following is the best way to proceed with that particular desktop computer?

Answers

There is only one solution to this: use a two-prong extension cord and plug all of the metal-enclosed desktop computers with three-prong cords into it. 

What function does the third prong in cords with three prongs serve?

A grounding wire can be connected from the electrical circuit to the appliance using the common 3-prong receptacle, which is why it is known as a grounding receptacle. A connection is made between the grounding wire and the plug's third prong.

Almost all electric board outlets in North-America have 2 vertical slots. The right slot is for the hot wire, and the left slot is for the neutral wire.

To power your device, electricity first passes through the hot wire. The neutral wire is then used to carry the current back to the outlet.

The circuit would be lacking without this loop. In other words, you just need two prongs for an outlet or device to work.

A ground prong, often known as a grounding wire, is the third, rounded prong on a plug. Electricity is constantly trying to find a way to the ground.

The ground wire serves as an escape route in the event of damage or a malfunction that changes the circuit and puts you and your equipment in danger of electric shock.

To know more about ground wire, visit: https://brainly.com/question/29689656

#SPJ4

Answer:

Find a different outlet that uses three prongs.

Explanation:

The third, or middle, prong of a computer plug is the grounding prong. In the event of a malfunction, the electricity flows through the grounding prong to the earth which, in turn, trips off the breaker, removing all electricity from that outlet. If the grounding prong is removed or bypassed and a malfunction occurs, the electricity will find the next shortest path to the earth, which may be a person who touches the computer. Having the electricity pass through a person could cause serious harm or even death.

You should never remove the third grounding prong or use an adapter to bypass the prong.

References

TestOut PC Pro 7.0 - 2.1 Protection and Safety

q_com_safm_equipment_grounding_pp7.question.fex

Help is greatly appreciated! I need a step but step explanation and a startup would be perfect.

Answers

First Problem:

The point we should pay attention to in this section is the following;

The type of the variable that we will store the temperature from the user must be a float. Because in the formula we will use, an integer is not generated for every integer we give.

Below is the Python Code of this problem with comments added.

#Variables we need to store the data from user.

city = input("Enter the city name: ")

temperature_celcius = float(input("Enter the current temperature in Celcius: "))

#Calculation section by using the formula.

temperature_fahrenheit = (temperature_celcius * 9/5) + 32

#Inform the user.

print(f"The current temperature in {city} is {temperature_celcius}°C, which is {temperature_fahrenheit}°F.")

Some computer experts have spoken out against the conversion to touch-screen voting machines because
A) a power failure could make it impossible for people to vote.
B) they do not have a paper audit trail.
C) there is no evidence that there have been any problems with punched card systems.
D) they are made in China, which does not even hold elections.
E) All of these

Answers

Due to the lack of a paper audit trail, several computer specialists have opposed the switch to touch-screen voting machine.

How do digital voting machines function?

A direct-recording electronic (DRE) voting machine processes data using computer software and records votes using a ballot display with mechanical or electro-optical components that can be actuated by the voter (usually buttons or a touchscreen).

An ExpressVote device is what?

All voters can use the ExpressVote, a universal voting mechanism. The touchscreen allows voters to select their options on the ballot. Voters who need an audio ballot have access to headphones and a tactile keypad.

To know more about computer software visit:-

https://brainly.com/question/29946531

#SPJ4

the 802.11ac wireless networking standard provides increased bandwidth and communication speeds by using which of the following technologies? (select two).

Answers

Channel bonding to combine more channels in the 5 GHz band to allow for up to 160-MHz-wide channels. MU-MIMO to allow multiple users to use the same channel. The correct options are B and D.

What is wireless networking?

A computer network that uses wireless data links between network nodes is referred to as a wireless network. Homes, telecommunications networks, and commercial facilities can all be connected using wireless networking.

By using channel bonding to connect multiple channels in the 5 GHz band to support up to 160-MHz-wide channels, the wireless networking standard increases bandwidth and communication speeds. MU-MIMO enables sharing of a channel by several users.

Thus, B and D are the correct options.

For more details regarding wireless networking, visit:

https://brainly.com/question/14921244

#SPJ4

Your question seems incomplete, the missing options are:

OFDM modulation to allow several parallel data channels to stream data.

Channel bonding to combine more channels in the 5 GHz band to allow for up to 160-MHz-wide channels.

Peer-to-peer mode to allow each host to communicate directly with other hosts.

MU-MIMO to allow multiple users to use the same channel.

Dual band transmission to allow data to be transmitted at two frequencies at the same time.

wap to find to sum the digits of a positive integer which is 5 digits long.​

Answers

Answer:

Explanation:

#include

int main()

{

int n, sum = 0;

printf("Enter a five digit number: ");

scanf("%d", &n);

while (n != 0) {

sum = sum + n % 10;

// removing last digit from number

n /= 10;

}

printf("Sum of digits: %d",sum);

return 0;

}

you are taking photographs of a friend, but when you review them they are consistently too dark. which of the following variables would not address this problem if you adjusted it? a. Shutter speed
b. Aperture
c. Focal length
d. ISO

Answers

If you are taking photographs that are consistently too dark, adjusting the following variables could help address the problem:

Shutter speed: By lowering the shutter speed, more light will be let into the camera, which will aid to brighten the image.

Aperture: By allowing more light to enter the camera and brightening the image, the aperture can be made larger (by using a lower f-number).

Increased ISO will increase the camera's sensor's sensitivity to light, which may help the image appear brighter.

Adjusting the focus length is one of the stated variables that would not solve the issue of the photos being too dark. The field of view and magnification of the image are determined by the focal length, however the exposure of the image is unaffected.

To know more about Photograph kindly visit
https://brainly.com/question/25379778

#SPJ4


Which security related phrase relates to the integrity of data?

Answers

Answer:

Explanation:

Data integrity.

Which of the following methods are static methods? The class in which the method is defined is given in parentheses following the method name.
a) sqrt (Math)
b) deposit (BankAccount)
c) equals (String)
d) play (Game from pig example in lecture)
e) a and c

Answers

The subsequent techniques are static methods as follows:

(A) sqrt (Math)

(B) deposit (BankAccount)

(C) equals (String)

(D) play (Game from pig example in lecture)

What are static methods?

A static method (or static function) is a method that is defined as a member of an object but can only be accessed from the constructor of an API object, not from an instance of the object generated using the constructor.

Rather than being an instance of a class, a static method in Java is a method that is a part of the class itself.

The method is available to each instance of the class.

Without requiring the class's object, static methods have access to class variables (static variables) (instance).

A static method can only access static data.

Now, we know about static methods, then the following static methods from the given options are:

(A) sqrt (Math)

(B) deposit (BankAccount)

(C) equals (String)

(D) play (Game from pig example in lecture)

Therefore, the subsequent techniques are static methods as follows:

(A) sqrt (Math)

(B) deposit (BankAccount)

(C) equals (String)

(D) play (Game from pig example in lecture)

Know more about static methods here:

https://brainly.com/question/29607459

#SPJ4

in a certain video game, players are awarded bonus points at the end of a level based on the value of the integer variable timer. the bonus points are awarded as follows. if timer is less than 30, then 500 bonus points are awarded. if timer is between 30 and 60 inclusive, then 1000 bonus points are awarded. if timer is greater than 60, then 1500 bonus points are awarded. which of the following code segments assigns the correct number of bonus points to bonus for all possible values of timer ? select two answers.

Answers

Options A & D code segments assign the correct number of bonus points to the bonus for all possible values of the timer.

What are code segments?

In computing, an executable instruction-containing piece of an object file or the corresponding area of the program's virtual address space is referred to as a code segment, sometimes known as a text segment or simply as text. The non-coding portions are known as introns, while the coding segments are known as exons.

A code segment is a section of a computer file that contains object code or a similar segment of the program's address space that contains information on executable commands and directives. In the world of computing, a code segment is sometimes referred to as a text segment or, simply, as text.

To learn more about code segments, use the link given
https://brainly.com/question/25781514
#SPJ4

Your organization hosts an e-commerce website that has been receiving a significant increase in traffic. the cpu is handling the load, but the server is unable to process the bandwidth consistently. which of the following is the best choice to solve this problem?

Answers

The best choice to solve the server that unable to process the bandwidth consistently is NIC Teaming.

What is NIC Teaming?

NIC Teaming or Network Interface Card teaming is the technique to combining multiple network card or physical network adapters together into a single or multi group, so it can make improvement for load balancing, performance, or redundancy reasons.

Since it grouping the network interface card, it can increase the availability of network bandwidth in a network path. So, it can make the bandwidth more consistent for server.

Thus, with the NIC Teaming we can make more consistent in bandwidth for server.

You question is incomplete, but this is a general answer about bandwidth, server, and NIC Teaming.

Learn more about NIC Teaming here:

brainly.com/question/24075846

#SPJ4

can classify linear and nonlinear data by transforming the original data into a higher dimension from where it can find a hyperplane for data separation using essential training tuples.

Answers

Support Vector Machines can classify linear and nonlinear data by transforming the original data into a higher dimension from where it can find a hyperplane for data separation using essential training tuples.

Define Support Vector Machines.

Support vector machines are supervised learning models with related learning algorithms that examine data for regression and classification in machine learning. A deep learning technique known as a support vector machine (SVM) carries out supervised learning for the classification or regression of data sets. In the fields of artificial intelligence and machine learning, supervised learning systems offer input and intended output data that are labeled for classification.

Support Vector Machine (SVM) models are a strong tool for identifying predictive models or classifiers because they can categorize groups or generate predictive rules for data that cannot be classed by linear decision functions and because they handle sparse data effectively.

To learn more about support vector machine, use the link given
https://brainly.com/question/17490061
#SPJ4

question 2 understanding context is an analytical skill best described by which of the following? select all that apply.

Answers

It is crucial to note that understanding context is an analytical skill best described by:

"Gathering additional information about data to understand the broader picture" (Option C)"Identifying the motivation behind the collection of a dataset" (Option D)

What is analytical skill?

The capacity to dissect information into smaller categories in order to derive conclusions is referred to as analytical capability. Analytical ability is divided into aspects such as logical reasoning, critical thinking, communication, research, data analysis, and creativity.

Context analysis is a technique for examining the environment in which a company works. Environmental scanning mostly focuses on a company's macroenvironment. However, context analysis takes into account a company's complete environment, both internal and external.

It is important to note that understanding context is thinking about the larger context in which a dataset or piece of information resides and acquiring extra knowledge as needed to make sense of it. It also entails analyzing the reason for data gathering and how it may have impacted how the data was obtained or presented.

Learn more about analytical skills:
https://brainly.com/question/1086200
#SPJ1

Full Question:

Understanding context is an analytical skill best described by which of the following? Select all that apply.

A. Working with facts in an orderly manner

B. Adding descriptive headers to columns of data in a spreadsheet

C. Gathering additional information about data to understand the broader picture

D. Identifying the motivation behind the collection of a dataset

As an IT technician, you are often asked to work on laptop computers that included internal wireless network cards. Which of the following is the MOST commonly used type of card for these internal wireless adapters?

Answers

Answer:

The most commonly used type of card for internal wireless adapters in laptops is a Wi-Fi card, also known as a wireless network interface controller (WNIC). Wi-Fi is a wireless networking technology that uses radio waves to provide wireless high-speed Internet and network connections. Wi-Fi cards use the IEEE 802.11 standard to operate, and they are designed to work with a variety of devices, including laptops, smartphones, tablets, and other wireless-enabled devices. Some examples of Wi-Fi cards that are commonly used in laptops include the Intel Wireless-AC series, the Qualcomm Atheros AR9485, and the Realtek 8821AE.

Explanation:

TCP/IP:
a. is the least commonly used network protocol for LANs because it cannot be combined with Ethernet
b. performs packetizing, as well as routing and addressing functions
c. is not very efficient and is prone to errors
d. is compatible with only one type of data link protocol, SDLC
e. refers to Telephone Control Procedures/Inter-exchange Procedures

Answers

TCP/IP is the least commonly used network protocol for LANs because it cannot be combined with Ethernet. The correct option is a.

What is TCP?

The usage of TCP allows for the secure exchange of data between the server and the client. No matter how much data is transferred across the network, it ensures its integrity. It is therefore used to transfer data from higher-level protocols that demand the arrival of all transmitted data.

When it came to protocols that could be used to offer network-layer and transport-layer functionality, TCP/IP was formerly only "one of many" alternative sets of protocols. TCP/IP is the globally accepted standard for internetworking protocol suites even if there are still other solutions available today.

Therefore, the correct option is a, is the least commonly used network protocol for LANs because it cannot be combined with Ethernet.

To learn more about TCP, refer to the link:

https://brainly.com/question/28119964

#SPJ4

TRUE OR FALSE susanne accidentally deleted an important paragraph in her document. she can recover the paragraph by selecting the appropriate autosaved version of the document in the info screen of the file tab.

Answers

Susanne accidentally deleted some important paragraph in her document. she can recover the paragraph by just selecting the appropriate autosaved version of the document in the info screen of the file tab. (True)

What is file tab?

The File tab is a section of the Office Ribbon in Microsoft Word and other Microsoft Office applications that provides access to file functions. For instance, you can access the Open, Save, Close, Properties, and Recent file options from the File tab. Microsoft Word 2010 is shown in the image below. The blue icon in the top-left is the File tab.

The top of the window contains one or more tabs called file tabs when viewing a computer file's properties. Some software programmes might integrate, adding more file tabs, information, or functionality to the properties window. The information listed below is one of the specific details about the file that are provided on each file tab.

Learn more about file tab

https://brainly.com/question/27683448

#SPJ4

A computer's power supply converts mains AC to low-voltage regulated DC power for the internal components of a computer. You are building a new computer. You are deciding which type of power supply to install. Which of the following definitions BEST describes a valid type of power supply?
- A single-rail power supply provides one rail (PCB trace). This provides the best safety for the computer by providing a single point of shutdown in the event of a short circuit.
- A single-rail power supply provides one rail (PCB trace) used to always provide equal wattage to all devices attached to the power supply.
- A dual-rail power supply provides separate rails (PCB traces) used to balance the power load between multiple circuits, which prevents any one circuit from becoming overloaded.
- A dual-rail power supply provides separate rails (PCB traces) used to provide equal wattage to the devices attached to each rail.

Answers

The correct definition of a dual-rail power supply is: "A dual-rail power supply provides separate rails (PCB traces) used to balance the power load between multiple circuits, which prevents any one circuit from becoming overloaded."

In general, dual-rail power supplies are preferred for computers because they offer better power management and can help prevent short circuits or other issues that can damage the computer's components. However, single-rail power supplies can also be used in some cases, depending on the specific power requirements of the computer's components. A dual-rail power supply is a type of power supply that provides separate rails, or PCB traces, for distributing power to the components of a computer. These separate rails are used to balance the power load between multiple circuits, which can help prevent any one circuit from becoming overloaded.

Learn more about power supply, here https://brainly.com/question/28875612

#SPJ4

which of the following will result in only all the items in list being printed to the console if placed where the program reads and the program is run? A. i < list[list.length]
B. i < list.length
C. i < list[0]
D. i < list[1]

Answers

A.  i < list[list.length]  The program includes individual variables to store the names of each student rather than a single list of students.

The categorization of data items is known as a data type. It addresses the sort of significant worth that determines what tasks can be performed on a specific information. In Python programming, everything is an object. Data types are classes, and variables are instances (objects) of these classes.

Python has the following data types built-in by default, in these categories:

Text Type:               str

Numeric Types:     int, float, complex

Sequence Types:       list, tuple, range

Mapping Type:     dict

Set Types:             set, frozenset

Boolean Type:     bool

Binary Types: bytes,  bytearray, memoryview

None Type:             NoneType

Python List Data Type

The rundown is a flexible information type select in Python. It is similar to the C/C++ array in some ways. But the list in Python is interesting because it can hold multiple types of data at once. A formal list is an ordered sequence of data enclosed within commas and square brackets ([]).

The data in a Python Dictionary are arranged in a key-value pair format. It is like the hash table sort. Curved braces are used to write dictionaries in the form key: value. Optimized data retrieval from a large amount of data is extremely useful.

To know more about Python List Data Type visit

brainly.com/question/17738995

#SPJ4

Protecting information and information systems from unauthorized access, use, disclosure, disruption, modification, perusal, inspection, recording, or destruction best defines
A) information security.
B) security audit.
C) anti-virus protection.
D) incident management

Answers

In order to maintain integrity, confidentiality, and availability, information and information systems must be protected from unauthorized access, use, disclosure, interruption, alteration, and destruction.

Which three methods of information protection are there?

The CIA trinity must be taken into account when talking about data and information. The three fundamental components of an information security concept known as the CIA triad are confidentiality, integrity, and availability.

Which response most accurately sums up the authorization part of access control?

The process of deciding who is granted access and what resources they are granted for is known as authorization.

To know more about information systems visit :-

https://brainly.com/question/14688347

#SPJ4

one possible tool to collect primary research data is the , which allows the researcher to gain much insight on the attitudes, opinions or motivations of customers. observation method clutter test central location test experimental method survey method

Answers

The survey is a typical technique for acquiring primary research data, in which the researcher learns about attitudes, beliefs, or motivations by questioning present or potential clients (political polls are a common type of survey).

What are the two basic categories of research tools that are employed to gather primary data?

Due to the variety of questionnaires (with open-ended or closed-ended questions) and the widespread use of mechanical instruments, it is known that these two forms are the most common.

What technique is applied to the gathering of primary data?

Direct information gathering from users is known as primary data collection. Typically, questionnaires or interviews are used to gather this type of data.

To know more about primary research visit :-

https://brainly.com/question/502703

#SPJ4

FILL IN THE BLANK sql allows users to isolate specific information contained in a database, as well as to aid in the selection, creation, addition, and extraction of data from a database. sql stands for____query language.

Answers

Sql allows users to isolate specific information contained in a database, as well as to aid in the selection, creation, addition, and extraction of data from a database. sql stands for Structured query language.

What are structured query languages?Relational databases are managed and different operations on its data are carried out using the standardized programming language known as Structured Query Language (SQL).The domain-specific programming language known as Structured Query Language, or simply SQL, is used to handle data stored in relational databases or for stream processing in relational data stream management systems.A common computer language used to extract, arrange, manage, and manipulate data from relational databases is known as Structured Query Language (SQL). As a result, SQL is known as a database language that can operate on databases made up of tables made up of rows and columns.

To learn more about Structured query language refer to:

https://brainly.com/question/28579489

#SPJ4

Hi Can any one help me with this question please.On the Cities worksheet, click cell E13. Depending on the city, you will either take a shuttle to/from the airport or rent a car. Insert an IF function that compares to see if Yes or No is located in the Rental Car? Column for a city. If the city contains No, display the value in cell F2. If the city contains Yes, display the value in the Rental Car Total (F4). Copy the function from cell E13 and use the Paste Formulas option to copy the function to the range E14:E18 without removing the border in cell E18.

Answers

Using knowledge in computational language in EXCEL it is possible to write a code that insert an IF function that compares to see if Yes or No is located in the Rental Car.

Writting the formula:

E13 =IF(C13="No",$F$2,$F$4) copy down to E18

F13 =VLOOKUP(B13,$A$7:$B$10,2,0)*$B$5 copy down to F18

H13 =SUM(D13:G13) copy down to H18

I2 =AVERAGE(H13:H18)

I3 =MIN(H13:H18)

I4 =MAX(H13:H18)

What is VLOOKUP and how does it work?

VLOOKUP stands for Vertical Lookup. As the name specifies, VLOOKUP is a built-in Excel function that helps you look for a specified value by searching for it vertically across the sheet. VLOOKUP in Excel may sound complicated, but you will find out that it is a very easy and useful tool once you try it.

See more about EXCEL at brainly.com/question/28499437

#SPJ1

You have just installed a second monitor for a salesperson's workstation. The user wants to clone the display so that both monitors show the exact same image. This will allow them to see one of the displays while their customer sees the other across their desk. When you connect the second monitor and clone the display, the second monitor displays text twice as large as the other monitor. Which of the following settings should you configure?
Options are :
Refresh rate
Color depth
Extended mode
Resolution

Answers

The correct answer to the given question about setting configure is option d) Resolution

the group of settings that can be altered in hardware, software, or firmware that have an impact on how well an information system is protected or functions. The number of distinct pixels that can be shown on a digital television, computer monitor, or other display device depends on its display resolution or mode. It can be a confusing term, especially since projection displays that use fixed picture-element arrays, flat-panel displays, and cathode ray tube displays all use various mechanisms to regulate the shown resolution. Display resolution is a phrase used to describe the physical number of columns and rows of pixels that make up a fixed-pixel-array display, such as those used in plasma display panels, liquid crystal displays, DLP projectors, OLED displays, and related technologies.

To learn more about resolution click here

brainly.com/question/27964189

#SPJ4

Given string userText on one line and character fourthChar on a second line, change the fourth character of userText to fourthChar.

Ex: If the input is:

cheetah
v

then the output is:

chevtah

Note: Assume the length of string userText is greater than or equal to 4.

Answers

Answer:

# Get the input from the user

userText = input()

fourthChar = input()

# Replace the fourth character of the string with the new character

userText = userText[:3] + fourthChar + userText[4:]

# Print the modified string

print(userText)

Explanation:

This code first gets the input from the user and stores it in the userText and fourthChar variables. It then uses string slicing to replace the fourth character of the string with the new character. Finally, it prints the modified string.

The input string is cheetah, and the fourth character is e. The code replaces this character with the new character v, resulting in the modified string chevtah.

you are designing an application to support a veterinary clinic. which of the following probably should not be represented as an object?

Answers

It is probably best to avoid representing drug dosage as an object. You are creating an application to aid a veterinary hospital.

What does the text regard as the most crucial factor to take into account when planning a course?

A single concept or item from the problem domain should be represented by each class.

What kind of connection between the bank account and the consumer is displayed?

A customer who borrows money from a bank owes the bank money. Any time a loan or advance is involved, the banker is the creditor and the client is the debtor. When someone deposits money with a bank and then borrows money from the same bank, this is the first instance in which the relationship is reversed.

To know more about designing  application visit :-

https://brainly.com/question/14913946

#SPJ4

Jason is printing out a copy of Dion Training's new logo on his color laser printer. When the logo is printed, the blue color does not appear to be the same as the one on the screen. Jason believes the issue is an incorrect chroma display between the monitor and the printer. Which of the following solutions would best fix this issue?
O Replace the toner cartridge since the printout is faded
O Update the print drivers to ensure they are operating properly
O Set the color profile to a sepia tone to eliminate the issue
O Calibrate the monitor and printer to use the same color profile

Answers

Inaccurate chroma display happens when the monitor's and printer's color profiles are different. In order to fix this problem, it is essential to calibrate both the printer and the monitor to the same standard.

How does printing use chroma?

Chroma, which is used to describe a color's purity, intensity, or saturation, is influenced by the individual and combined printed color densities, which were covered last week in Objective Ink Measures Optical Density.

What do a printer and a monitor have in common?

A printer is a device that makes a tangible copy of electronic data from a computer. A monitor, commonly referred to as a visual display unit (VDU), is a gadget that displays information as text or images. A monitor is a dynamic, continuously updated picture display.

To know more about monitor visit:-

https://brainly.com/question/13369289

#SPJ4

Assume a computer has 32-bit integers. Show how the value 0x0001122 would be stored sequentially in memory, starting at address 0x000, on both a big endian machine and a little endian machine, assuming that each address holds one byte.
Address Big Endian Little Endian
0x000
0x001
0x002
0x003

Answers

The value 0x0001122 would be stored consecutively in memory on both a big endian machine and a little endian machine, starting at address 0x000.

What is the number of 32-bit integers?

A nonnegative integer in the range [0 to 4294967295] is encoded using a 32-bit datum known as an unsigned integer. In twos complement notation, the signed integer is shown.

What does the computer term 32-bit mean?

In computer systems, the term "32-bit" describes how many bits can be sent or processed simultaneously. In other words, a data element consists of 32 bits in total. When referring to a data bus, the term "32-bit" refers to the number of accessible paths, indicating that data can move over 32 of them simultaneously.

To know more about memory visit :-

https://brainly.com/question/28314437

#SPJ4

Assume you have a 32-light bulb string and ONE bulb is burned out. Using the half-splitting method and starting from the left half of the circuit, how many resistance measurements will it take to find the faulty bulb if it is number seventeenth from the left?

Answers

Answer: Finding a defective bulb among a specified sequence of bulbs is the task. A broken bulb exhibits inadequate resistance.

Explanation: I took the assignment

The number of resistance measurements that will it take to find the faulty bulb if it is number seventeenth from the left is 15.

What is Resistance measurement?

Resistance measurement may be defined as a type of measure of the opposition to current flow in an electrical circuit. It is measured in ohms, symbolized by the Greek letter omega (Ω). It is the opposition that a substance offers to the flow of electric current.

According to the context of this question, if there is a 32-light bulb string and one bulb is burned out. Through the utilization of the half-splitting method starting from the left half of the circuit, there are 15 resistance measurements that will it take to find the faulty bulb if it is number seventeenth from the left.

To learn more about Resistance, refer to the link:

https://brainly.com/question/25997303

#SPJ2

A lesser known tool used widely by government agencies is ____, which retrieves data from smartphones, GPS devices, tablets, music players, and drones.
MOBILedit Forensic
Micro Systemation XRY
DataPilor
BitPim

Answers

The correct answer to the given fill in the blanks question about lesser known tool by government agencies is option b) Micro Systemation XRY

The Swedish business MSAB's XRY is a digital forensics and mobile device forensics product that is used to examine and recover data from mobile devices such mobile phones, smartphones, GPS navigation systems, and tablet computers. It comprises of a hardware component for connecting phones to a PC and software for data extraction. The goal of XRY is to forensically recover a device's contents such that the user may trust the information contained within. In civil and criminal investigations, intelligence gathering, data compliance, and electronic discovery situations, it is used. The program is accessible to military, law enforcement, and intelligence organizations. It has established itself as a well-known instrument in the field of digital forensics.

To learn more about forensics click here

brainly.com/question/14403044

#SPJ4

Write a flowchart (or pseudocode) and C code for a program that does the following: Declares variables with float (real) data types. Assigns the tax rate
=.08
Asks the user to enter the sales amount Computes the sales tax by multiplying the sales by the tax rate Displays the sales tax with the appropriate message Create an assignment statement that computes the total sales, including the tax amount. Output a final message along with the total sales amount Be sure to add comments throughout your program describing what is happening

Answers

In order to write Pseudcode Alghorithm follow the given step or the chart in the answer.

Display " Enter the amount of the sale:" Read saleAmount. Display" Enter the sales tax rate:" Read taxRate. sales Tax saleAmount * taxRate. = saleTotal saleAmount + salesTax. Display" The sales tax is $" Display sales Tax. Display" The sale total is $" Display saleTotal.

The accuracy of complex software programs can be confirmed by implementing a thorough test plan that covers all potential outcomes that might occur when using the product. Test cases with boundary value cases for various software functions and procedures are one of the potential scenarios. Unit testing frameworks can be used to check the accuracy of various software program functionalities, and more test scenarios can be developed for thorough testing and verification. Additionally, several automation testing methods can be used to confirm the accuracy of the software program. By logging helpful data while the software is in use, further software behavior can be checked for accuracy.

To learn more about program click here

brainly.com/question/2553593

#SPJ4

Other Questions
A family compares the cost of renting a truck from two different companies for its 2-day move to another state.The costs are shown in the table. A professional football player kicks a football with an initial velocity v = (15.0 m/s ) x ^ + (19.0 m/s ) y ^ . How long the football stays in the air is known as the hang time. What is the importance of the Eightfold Path in humanity? What is the principle of temperature monitoring? Find the domain for the rational function f of x equals quantity x plus 4 over quantity 3 times x minus 5. 1. negative infinity to negative five thirds and negative five thirds to infinity 2. negative infinity to five thirds and five thirds to infinity 3. ([infinity], 4)( 4, [infinity]) ([infinity], 4)(4, [infinity]) APUSH Period 9 Timeline of Major Events and Ideas (1980-Present) Write the reaction that takes place between Ammonia, NH3, and Acetic Acid, HCH3COO. Then determine the acid, base, conjugate acid and conjugate base. sally automotive is preparing the budget for the first quarter and estimates that budgeted cash purchases will be $106,000, $98,400, and $103,600 for january, february, and march, respectively. the company also purchases on credit and historically pays 40% of its credit purchases in the month of purchase, 50% in the month following purchase, and 10% in the second month after the purchase. credit purchases during this time are expected to be $186,000, $174,800, and $202,000 for january, february, and march, respectively. what amount will be reported for accounts payable on the march balance sheet? Order chronologically the following civilizations, listing the more ancient ones first- 1. 2. 3. 4.Mesopotamian- 1. 2. 3. 4.Minoan- 1. 2. 3. 4.Mycenaean- 1. 2. 3. 4.Egyptian which sentence uses direct characterization? ana slipped out of the room when the argument began. liam consulted his notes and raised his hand to respond. georgia is patient and methodical when she practices guitar. discuss the four stages of malcolm's life with reference to his names: malcolm little, detroit red, malcolm x, and el-hajj malik el-shabazz One hundred offices need to be painted. The workers choose between yellow, blue, or red paint. They decide that 45% of the offices will be painted yellow; 28% will be painted blue, and the remaining offices will be painted red. What amount of offices will be painted red? What did World War 1 do for women's rights? What is the image point (-4, 5) after a translation right 5 units and 2 units up? #5 A bias of -10 means A. You are over forecasting B. You are under forecasting C. Your forecast is almost perfect D. It tells you nothing about your forecast Submit Answer format: Text public class NumberTriangle { public static void main(String[] args) { // Call makeNumberTriangle makeNumberTriangle(); } // Makes an upright triangle with the numbers 1-5 public static void makeNumberTriangle() { // Your code goes here! } } for a child to be xyy, there must have been a mistake in meiosis. was the mistake during sperm formation or egg formation? was the mistake in meiosis i or ii? explain. What was the most important issue for Mary Wollstonecraft? the balance of payments on the current account plus the balance of payments on the financial account is Read the song lyrics presented in this link. focus on the lyrics of "brother, can you spare a dime?" to answer the following question. take a close look at the first verse of the song. which consequences of the depression are reflected in this song? check all of the boxes that apply.a. bread lines shantytowns b. unemployment c. westward d. migration hope that things will improve