9.73 g of lead(iv) chloride contains enough cl- ions to make 5.31 g of magnesium chloride.
Given data:
Mass of lead(iv) chloride = 9.73 g
Molar mass of 9.73 g = 278 g/mol
Mole can be determine by using the formula:
Mole = mass / molar mass
Moles = 9.73 g / 278 g/mol
Moles = 0.035
If 9.73 g of lead(iv) chloride contains 0.035 mole of lead(iv) chloride then 5.31 g of magnesium chloride
The formula is Mgcl2 ,so the mole will be 24 + (35.5 x2) = 95.
So 2x 35.5 = 71g of Cl will be required to make 95g of Mgcl2
So 1 gram of Cl = 95/71 = 1.34g Mgcl2
So 3.95g Cl =1.34 x 3.95 = 5.28gram
Therefore, cl- ions to make 5.31 g of magnesium chloride.
To know more about mass
https://brainly.com/question/19694949
#SPJ4
How many grams of CaCl₂ would be required to produce a 3.5 M solution with a volume
of 2.0 L?
what would happen if you placed a magnet in a furnace capable to melthing any mineral and turned it to maximum
If you placed a magnet in a furnace capable to melting any mineral and turned it to maximum then magnet will lose its magnetic force.
anything that can produce a magnetic field around itself and draw iron with it is a magnet. Every known element and several compounds had undergone magnetism tests by the end of the 19th century, and it was found that each one of them possessed some magnetic properties. The only three elements that exhibit ferromagnetism are iron, nickel, and cobalt. All ferromagnetic materials exhibit hysteresis, a lag in response to shifting forces brought on by energy losses from internal friction. When B is measured for various values of H and the results are graphically displayed, a loop of the kind shown in the accompanying figure is created. A hysteresis loop is what this loop is called.
To know more about magnet visit : https://brainly.com/question/22077087
#SPJ4
[Urgent!] - Equilibrium Problem
The equilibrium constant, K, for the following reaction
N₂(g) + O₂(g) ↔ 2NO(g)
is 4.00 x 10⁻² at a very high temperature. The reaction is at equilibrium at this temperature with [N2] = [O2] = 0.100 M and [NO] = 0.0200 M in a 2.00 liter flask. If 0.120 mol of NO is suddenly added to the reaction mixture what will be the concentrations of all species when equilibrium is re-established?
Answer:
√K = [.08-2x]/[.1+x]
Explanation:
As instructed by the question asker, I am putting this answer down. Hopefully it is correct (fingers crossed).
an aqueous solution of potassium bromide, kbr, has a concentration of 4.60 mol/l and has a density of 1.37 g/ml. what are the mass percent and mole fraction of kbr in this solution?
Mass percentage of potassium bromide KBr is 40.0% and the mole fraction of potassium bromide KBr is 0.0915.
The ratio of the mass of the solute contained in a solution to the mass of the solution as a whole is known as the mass percent. When the mass of the solute and the volume of the solution are supplied, the mass/volume percent is employed to indicate the Mole fraction concentration of the solution. Mole fraction is the ratio of the moles of one component to the total moles that represent all the components in a solution or other combination.
Brief explanation of solution :-
Molarity of KBr solution = 4.60 mol/L
Density of solution d= 1.37 g/mL
Molar mass of KBr=119.002 g/mol
a) Mass percentage of KBr ,(%):
We have formula that M = mxdx10/MW
Here, m is mass of KBr and MW is molar mass of KBr.
M is molarity of solution
Then, m= MXMW/dx10
= 4.60×119.002 /1.37×10
=39.95 or 40.0
mass percentage of KBr is 40.0%.
b) Mole fraction of KBr in solution:
Weight of solution, w = dxV
=1.37g/mL *1000mL
=1370g
So, mass of water, [tex]W_{H2O}[/tex] = 1370-(4.60x119.002)
=1370-547.409
= 822.59g
No. of moles of water = mass of water / MW. of water
= 822.59g/18.02 g/mol
=45.65mol
Now, the mole fraction of KBr (solute) is
квт = No. of moles of KBr / Total no. of moles in solution
= 4.60 mol (4.60+45.65)mol =0.0915
Mole fraction of KBr= 0.0915
learn more about Mass percentage and mole fraction here:
https://brainly.com/question/14783710
#SPJ4
What is the difference between organic and inorganic chemistry? What are the main characteristics and classes of organic compounds?
Organic chemistry is the study of the structure, properties, and reactions of compounds that contain carbon. These compounds are found in living organisms and also can be synthesized artificially. Organic compounds are characterized by the presence of carbon-hydrogen bonds and are often based on hydrocarbons, which are molecules made up of only hydrogen and carbon atoms.
Inorganic chemistry is the study of the structure, properties, and reactions of compounds that do not contain carbon-hydrogen bonds. These compounds are typically not found in living organisms and are not based on hydrocarbons. Inorganic compounds can include elements such as metals, nonmetals, and metalloids.
There are many classes of organic compounds, including:
Hydrocarbons: These are compounds that are made up of only hydrogen and carbon atoms. They can be saturated (single bonds only) or unsaturated (double or triple bonds). Examples include alkanes, alkenes, and alkynes.
Alcohols: These are compounds that contain a hydroxyl group (-OH) attached to a carbon atom. Examples include ethanol and methanol.
Ethers: These are compounds that contain an oxygen atom bonded to two carbon atoms. Examples include dimethyl ether and ethyl methyl ether.
Aldehydes: These are compounds that contain a carbonyl group (-CO) at the end of a carbon chain. The carbonyl group can also be found within a chain of carbon atoms. Examples include formaldehyde and acetaldehyde.
Ketones: These are compounds that contain a carbonyl group (-CO) within a carbon chain. Examples include acetone and 2-butanone.
Carboxylic acids: These are compounds that contain a carboxyl group (-COOH) attached to a carbon chain. Examples include acetic acid and propionic acid.
Esters: These are compounds that contain a carbonyl group (-CO) bonded to an oxygen atom and a hydroxy group (-OH). They are formed by the reaction of a carboxylic acid with an alcohol. Examples include ethyl acetate and butyl acetate.
Amines: These are compounds that contain a nitrogen atom bonded to one or more carbon atoms. They can be primary, secondary, or tertiary, depending on the number of carbon atoms bonded to the nitrogen atom. Examples include methylamine and ethylamine.
Nitriles: These are compounds that contain a carbon atom bonded to a nitrogen atom and a triple bond (-CN). Examples include acetonitrile and propionitrile.
Aromatic compounds: These are compounds that contain a ring of carbon atoms with alternating single and double bonds. They are usually characterized by their pleasant odors and are often found in natural products. Examples include benzene and toluene.
which contains more moles of material: 80 grams of helium gas (he, having atomic weight 4.0 g/mol) or 400 grams of argon gas (ar, having atomic weight 40 g/mol)?
More material per mole can be found in helium.
The unit of measurement for quantity is the mole. Things react in straightforward mole ratios. However, as balances do not provide readings in moles, you must convert them into grams when comparing the amount of one material to another using moles.
To convert molecular weights to grams, follow these three procedures.
1. Determine the number of moles mentioned in the question.
2. Determine the substance's molar mass.
3. Multiply the two figures.
Avogadro's number of atoms makes up one mole. The amount of a mole can be translated to grams if you know how many there are, and vice versa.
80g/4g/mol helium = 20 Mol
400g/40g/mol of argon = 10 mol
To learn more about helium, refer:-
https://brainly.com/question/1780577
#SPJ4
when a system is adiabatic, what can be said about the entropy change of the substance in the system
The system goes through a reversible process, but because there is no heat movement, the entropy of the system stays the same. Entropy must rise if the process is irreversible.
In other words, it doesn't go down. Entropy change occurs solely as a result of irreversibilities in the absence of any heat transmission, and its consequence is invariably a rise in entropy. In a process that is only adiabatic, entropy does not remain constant.
In an adiabatic process that is also reversible, entropy doesn't change.
where there is no mass transfer in a close system. Because the process is adiabatic, there is no heat transmission and no entropy change as a result of heat transfer. If the process is likewise reversible, then neither entropy inside the system is generated nor is there any entropy change as a result of entropy formation. Therefore, for an adiabatic process that is also reversible, the entropy change is zero.
To learn more about Entropy please click on below link
https://brainly.com/question/13999732
#SPJ4
in attempting to explain the line spectrum of hydrogen, bohr suggested that the energy of electrons in atoms is
When the electrons in an atom transition between energy levels, according to Bohr, an atomic spectrum is produced. When energy is absorbed, the electrons would leap to a greater energy level than they normally would, creating an excited and unstable condition. Electrons ordinarily have the lowest energy attainable.
The characteristic wavelengths of electromagnetic radiation (or a subset of it) that are released or absorbed by a material, atom, or molecule are known as a spectrum.
The term "spectrum" alludes to how various people experience autism in a variety of ways; autism is a condition that is highly diverse. Autism is seen as a spectrum disorder because each autistic person experiences it differently. Some autistic people may require more care than others in order to live the lifestyles they desire.
The sun's spectrum of colors, the rainbow, and a molecule's infrared absorption wavelengths are a few examples of spectra.
Continuous, emission, and absorption spectra are the many types.
To learn more about spectrum. Please visit the below link.
https://brainly.com/question/6836691
#SPJ4
Where are most volcanoes located? (Use information from the map.) What is happening to the earth’s crust in these locations? Why might these locations be more conducive to volcanic activity?
Answer:
The Pacific ocean
Explanation:
Why because it Causes by the amount of movement of tectonic plates in the area.
The mass of an irregular object is 42.67 g. If it displaces a volume of water equivalent to 12.9 mL, what is the density?
The density of the irregular object, given that it has a mass 42.67 g and it displaces a volume of water equivalent to 12.9 mL is 3.31 g/mL
How do I determine the density?We know that the density of a substance is defined as mass per unit volume as shown below:
Density = mass / volume
With the above formula, we can obtain the density of the irregular object as illustrated below:
Mass of irregular object = 42.67 gVolume of water displaced = 12.9Volume of irregular object = Volume of water displaced = 12.9 mL Density of irregular object = ?Density = mass / volume
Density of irregular object = 42.67 / 12.9
Density of irregular object = 3.31 g/mL
Thus, from the above calculation, the density of the irregular object is 3.31 g/mL
Learn more about density:
https://brainly.com/question/952755
#SPJ1
describe how soil salinization occurs. propose a solution to prevent or remediate soil salinization. identify one disadvantage of the solution you propose.
Soil salinization occurs when the soil becomes too high in salt content, which can be harmful to plants. This can happen due to a variety of factors, including irrigation with salty water, natural salt deposits in the soil, or high levels of salt in the air.
One solution to prevent soil salinization is to use irrigation techniques that minimize the amount of salt that is introduced to the soil. For example, drip irrigation and other low-volume irrigation methods can help to reduce the amount of salt that is applied to the soil. Another solution is to use a soil amendment, such as gypsum, to help remove excess salt from the soil.
One disadvantage of using a soil amendment to remediate soil salinization is that it can be expensive to apply. Additionally, it may not be effective in all cases, depending on the specific cause of the soil salinization and the type of soil.
To know more about Soil Salinization visit :
https://brainly.com/question/27588666?referrer=searchResults
#SPJ4
Which element in the periodic table would be the mot likely to gain electron in a chemical bond
The right-hand side of the atomic numbers contains nonmetals, which have relatively high electronegativity values and a propensity to gain electrons.
What is chemical bond explain?Atoms in molecules are held together by chemical bonds. Electrostatic forces between negative-charged electrons and ionized atomic nuclei produce bonds (the positions of which in space are determined by quantum mechanics).
How does a chemical bond develop?A chemical bond is the term used to describe the attraction amongst atomic nuclei. To form bonds, atoms exchange or swap their valence electrons. The valence electrons, which make up an atom's lowest energy level, have the capacity to interact chemically. The most straightforward explanation is that atoms are trying to enter the safest (lowest-energy) state they can.
To know more about Chemical bond visit:
https://brainly.com/question/15444131
#SPJ4
what is the minimum voltage required to generate h2 and o2 if the pressure on the gases at the depth of the wreckage (2 mi ) is 300 atm ?
A. 7 x 10^8 mole of H2 requires 8.48 x 10^10 Coulombs of electrical charge, and a voltage of 632.2 V. The minimum electrical energy required to raise the Titanic is 4.02 x 10^13 kW hr, and the minimum cost is $9.2 x 10^7.
1. The amount of H2 gas required to buoy the Titanic is 7 x 10^8 mole.
2. The number of Coulombs of electrical charge required to generate this amount of H2 gas is computed using Faraday's Law:
Q = nF
Where n is the number of moles of H2, F is the Faraday constant (96485 C/mol), and Q is the number of Coulombs.
Therefore, Q = (7 x 10^8) x (96485 C/mol) = 8.48 x 10^10 C.
3. The minimum voltage required to generate H2 and O2 gases is computed using the Nernst Equation:
E = E° - (RT/nF) ln(Q/Q°)
Where E is the voltage, E° is the standard voltage (1.229 V at 300 atm and 25°C), R is the gas constant (8.314 J/molK), T is the temperature (288 K at 2 miles depth), n is the number of moles of H2, F is the Faraday constant (96485 C/mol), Q is the number of Coulombs, and Q° is the standard charge (1 C).
Therefore, E = 1.229 - (8.314 J/molK x 288 K / (7 x 10^8 mol x 96485 C/mol)) ln(8.48 x 10^10 C / 1 C) = 632.2 V.
4. The minimum electrical energy required to raise the Titanic is calculated using the equation:
E = QV
Where E is the electrical energy, Q is the number of Coulombs, and V is the voltage.
Therefore, E = (8.48 x 10^10 C) x (632.2 V) = 4.02 x 10^13 kW hr.
5. The minimum cost of the electrical energy required to generate the necessary H2 gas is calculated using the equation:
Cost = (E x Price) / (1000 x 3600)
Where E is the electrical energy, Price is the cost per kW hr, and 1000 and 3600 are conversion factors.
Therefore, Cost = (4.02 x 10^13 kW hr x $0.23/kW hr) / (1000 kW hr/kW hr x 3600 s/hr) = $9.2 x 10^7.
For more questions like Electrical charge click the link below:
https://brainly.com/question/12502147
#SPJ4
Complete question:
Some years ago a unique proposal was made to raise the Titanic. The plan involved placing pontoons within the ship using a surface‐controlled submarine‐type vessel. The pontoons would contain electrodes (cathodes) and would be filled with H2 gas as a result of the electrolysis of water. It has been estimated that it would require about 7 x 10^8 mole of H2 gas to provide the buoyancy to lift the ship
a) How many Coulombs of electrical charge would be required?
b) What is the minimum voltage required to generate H2 and O2 if the pressure on the gases at the depth of the wreckage (2 miles) is 300 atm?
c) What is the minimum electrical energy (in kW hr) required to raise the Titanic by electrolysis?
d) What is the minimum cost of the electrical energy required to generate the necessary H2 gas if the electricity costs $0.23 per kilowatt‐hour (kW hr) to generate at the site?
the metal, with an atomic radius of 144 pm, crystallizes in a face-centered cubic lattice. what is the density of the metal? 30.0 g/cm3 7.17 g/cm3 10.6 g/cm3 2.40. g/cm3 1.06 g/cm3
The density of the given metal is 19.4g/cm³ which is calculated using the density formula.
For the FCC crystal, atoms are in contact along the diagonal of the unit cell.
4r= √2a
where a is edge length of unit cell and r is radius of atom.
Substituting values in the above given expression, we get
r= 144pm
Number of the atoms per unit cell (FCC) =4
Mass of 1 unit cell = 197×4=788amu
=1.66×10⁻²⁷ ×788kg=1.30808×10⁻²⁴ kg
Volume of 1 unit cell =(407×10⁻¹² )³ m³
=6.741×10⁻²⁹
=2.824×10⁻²⁸
Hence the density= 1.30808×10⁻²⁴/ 6.741×10⁻²⁹
=19404.83kg/m³
=19.4g/cm³
The density of the crystal will be 19.4g/cm³
To know more about the FCC lattice , please refer to below link:
https://brainly.com/question/20849341
#SPJ4
z, Kelly
7
In double replacement reactions, why will two metals not combine with each other when products are
formed?
A metals form negative ions and like charges attract
B metals form positive ions and like charges do not attract
Cmetals form negative ions and like charges do not attract
D metals form positive ions and like charges attract
<6
Save
8>
Dec's
When pieces of two ionic compounds swap places to create two new compounds, the reaction is known as a double replacement (also known as a double displacement, exchange, or metathesis reaction).
What is Double Displacement Reaction?When one reactant is partially replaced by another, the reaction is referred to as a twofold displacement reaction.
The list of double displacement reactions is as follows:
CB + CD + AB = AD
A twofold replacement process replaces the ions in two reactant ionic compounds with the same ions in two new product compounds.
When two reactants transfer cations or anions to create two new products, the reaction is called a double replacement.
Metathesis reactions and double displacement reactions are two other names for double replacement processes.
Examples of double replacement reactions include precipitation, gas production, and neutralization.
To learn more about double replacement refer to :
https://brainly.com/question/23918356
#SPJ1
Arrange the organic compounds from most soluble in water to least soluble in water: Most soluble in water Least = soluble in water Answer Bank CH; OH CH CH, OCH,
The order from most soluble to least soluble is CH3CH2CH2OH > CH3CH2OCH3 > CH3CH2CH3.
The solubility of a compound depends on the nature of the solute and the solvent. If the nature of both is the same (either both polar or both nonpolar) the salute will be soluble in that solvent.
The solubility of an organic compound in water depends on the following factor:
Hydrogen bonding: If the solute is capable to form hydrogen bonding with water, it will be soluble in the water.
Polarity: As the polarity of the solvent increases the water solubility also increases.
The most soluble compound in water is alcohol. The alcohol is the highest polar molecule from the given molecules. It also forms hydrogen bonding with the water as follows:
The second most soluble compound in water is ether, CH3CH2OCH3. Ether is less polar than alcohol and forms fewer hydrogen bonds with water.
The least soluble compound in water is propane, CH3CH2CH3. Propane is a nonpolar compound and it is insoluble in a polar solvent, water.
Therefore the order is as follows:
CH3CH2CH2OH>CH3CH2OCH3>CH3CH2CH3
To learn more about hydrogen bonding visit
https://brainly.com/question/16854739
#SPJ4
What is the molar solubility of Fe(OH)2 at 25 C if K sp of the compound is 7.9 x 10^16?
2.8 x 10^8 M
5.8 x 10^6 M
2.0 x 10^16 M
9.2x10^6 M
The molar solubility of Fe(OH)2 at 25 C if K sp of the compound is 7.9 x 10^16 is 5.8 x 10^6 M.
The equilibrium solubility of Fe(OH)2 is as follows:
Fe(OH)2(s) <--------> Fe2+(aq) + 2OH-(aq)
The equilibrium constant expression for this equilibrium, i.e. Ksp, is as follows.
Ksp = [Fe2+] [OH-]2
where,
[Fe2+] = molar concentration of Fe2+
[OH-] = molar concentration of OH-
sp stands for solubility product
The value of Ksp = 7.9×10-16
Now,
Let S represent the molar solubility of Fe(OH)2.
Fe(OH)2 having one Fe2+ and two OH-
So,
[Fe2+] = 1S
[OH-] = 2S
substitute 1S and 2S in Ksp expression
Ksp = 1S × (2S)^2
Ksp = 4S^3
So,
4S^3 = 7.9 ×10^-16 M3
S^3 = 1.975 × 10^-16 M3
S = 5.8×10^-6 M
Therefore,
The Molar solubility of Fe(OH)2 = 5.8 ×10-6 M
To know more about the Equilibrium constant, here
https://brainly.com/question/10038290
#SPJ4
Which of the following is a single replacement reaction?
Ca(OH)2 + H₂SO4 → CaSO4 + 2H₂O
CH4 + 202→ CO2 + 2H₂O
H₂O+ CO2 → H₂CO3
Fe + 3NaBr FeBr3 + 3No
Answer:
Fe + 3NaBr FeBr3 + 3No
Explanation:
In a single replacement reaction, a single element is replaced by another element in a compound. In this case, the iron (Fe) atom is replaced by a bromine (Br) atom, forming the compound iron (III) bromide (FeBr3) and sodium (Na) ions.
The other reactions you provided are not single replacement reactions. For example, in the first reaction, Ca(OH)2 and H2SO4 react to form CaSO4 and H2O, but no element is replaced by another element. In the second reaction, CH4 and O2 react to form CO2 and H2O, but again, no element is replaced. In the third reaction, H2O and CO2 react to form H2CO3, a compound known as carbonic acid. This reaction is not a single replacement reaction because no elements are replaced by other elements.
5-0.1 M solution of .................. has a lower ability to conduct electric current.
(a) Sulphuric acid
(b) Nitric acid
(C) Carbonic acid
(d) Hydrochloric acid
In
solution
Answer: c
Explanation:
the specific heat capacity of water is 1.00 cal/g.0c. how much heat is required to raise the temperature of 25.0 g water from 22.0 0c to 50.0 0c?
The specific heat capacity of water is 1.00 cal/g.°C, 2940 J much heat is required to raise the temperature of 25.0 g water from 22°C to 50.0°C
What is specific heat capacity?The specific heat capacity is measured in J/(kg K) or J/(kg °C), and it is the amount of heat (J) absorbed per unit mass (kg) of the material when its temperature rises by 1 K (or 1 °C).
The amount of heat required to increase the temperature of 1 gram of a material by 1 degree Celsius (°C) is known as specific heat. Since water has a higher specific heat than other substances, it requires more energy to raise its temperature.
Given that,
T₁ = 22°C
T₂ = 50.0°C
here
Specific heat capacity of water (Cp) = 1.00 cal/g.°C = 4.2 J/g.°C
Heat required to convert liquid from 22°C to 50.0°C.
Q₁ = m × Cp × (T₂-T₁)
or, Q = 25 g × (4.2 J/g.°C) × (50-22) °C
or, Q = 2940 J
To know more about specific heat capacity refer to:
https://brainly.com/question/26846829
#SPJ1
if two atoms of differing electronegativity are bonded covalently to each other, what is true of the electrons they share
If two atoms of differing electronegativity are bonded covalently to each other, the atom with the greater electronegativity attracts the bonded electrons.
When two atoms with different electronegativity are brought together in a covalent bond, the atom with a greater tendency toward electronegativity will often pull the shared electron pair closer to itself. because the definition of electronegativity is the potential to pull electron density in a covalent binding. So when two atoms of differing electronegativity are bonded covalently to each other, the atom with the greater electronegativity attracts the bonded electrons toward itself which results in a dipole generation in the molecule formed.
You can also learn about electronegativity from the following question:
https://brainly.com/question/17762711
#SPJ4
Which of the following best helps explain the trend of increasing atomic radius from N to Bi? A) The number of particles in the nucleus of the atom increases. Submit B The number of electrons in the outermost shell of the atom increases. Ğ¡ The attractive force between the valence electrons and the nuclei of the atoms decreases. D The repulsive force between the valence electrons and the electrons in the inner shells decreases.
The correct response is option C: The attractive interaction between the valence electrons and the atoms' nucleus weakens.
The force of attraction is an attraction that draws the body to it. In nature, there are many alluring forces at work. Among these are gravitational force, magnetic force, electric force, and electrostatic force.
The force of attraction between two bodies, according to Newton's law of gravitation, is directly proportional to the product of their masses and inversely proportional to the square of the distance between them. The gravitational force is always alluring in the natural world.
Give an illustration of an alluring force in nature.
Examples include gravitational force, electric force, electrostatic force, and magnetic force. Since it draws objects regardless of their distance, gravity is a well-known illustration of an attraction force.
To learn more about the attractive force. Please visit the below link.
https://brainly.com/question/2396709
#SPJ4
the most common type of regenerated fiber, which is derived from cellulose and is mostly plant in origin, is rayon.
It is true that the most common type of regenerated fiber, which is derived from cellulose and is mostly plant in origin, is rayon.
The most widely used type of regenerated fibre is rayon, which is mostly derived from plants and is manufactured from cellulose. Synthetic polymer fibres with a cellulose base are all derived from petroleum.
Dietary fibres are produced from indigestible plant parts and frequently consist of long, repeated chains of carbohydrates. The majority of fibers come from cereal and grain husks, which contain the insoluble fibers cellulose and lignin. The bulk of plant fibers are made of cellulose, sometimes in combination with other materials like lignin.
To know more about Rayon refer here
https://brainly.com/question/2203634#
#SPJ4
to neutralize a 40.0 ml sample of 0.120 m hcl using titration, what volume (ml) of the 0.120 m naoh would you need at the equivalence point of the titration?
At the equivalence point, the molarities of the two solutions are equal, so the volume of the NaOH required to neutralize the HCl is also 40.0 mL, for the titration.
The concentration of HCl multiplied by the volume of HCl must be equal to the concentration of NaOH multiplied by the volume of NaOH. The concentration of the HCl is 0.120 moles/L and the volume of the sample is 40.0 mL. This means that the concentration of NaOH multiplied by the volume of NaOH must equal 0.120 x 40.0 = 4.8 moles. The concentration of NaOH is also 0.120 moles/L, so the volume of NaOH must be 4.8/0.120 = 40.0 mL. This means that 40.0 mL of 0.120 m NaOH is needed at the equivalence point of the titration to neutralize a 40.0 mL sample of 0.120 m HCl. To determine the volume of 0.120 m NaOH needed at the equivalence point of a titration, the moles of HCl and NaOH must be equal. This means that the concentration of HCl multiplied by the volume of HCl must be equal to the concentration of NaOH multiplied
To know more about titration refer to the link brainly.com/question/2728613
#SPJ4
When a nucleus of 235U undergoes fission, it breaks into two smaller, more tightly bound fragments. Calculate the binding energy per nucleon for 235U and for the fission product 137Cs
When a nucleus of 235U undergoes fission, it breaks into two smaller, more tightly bound fragments. The binding energy per nucleon for 235U is 7.59 MeV/nucleon and for the fission product 137Cs is 8.39 MeV/nucleon.
What is nucleons ?
Nucleons is a term in chemistry that is used designate both protons and nucleus. The atomic nucleus holds them with a very strong force.
1) m_proton + m_netron + m_electron - m_U
= 92*1.007276466812 + 92*5.4857990943e-4 + 143*1.008664916 - (235.0439299)
= 1.9151 u
= 931.494061 * 1.9151 MeV
= 1784 MeV
=> 1784/235 = 7.59 MeV/nucleon
2) m_proton + m_netron + m_electron - m_Cs
= 55*1.007276466812 + 55*5.4857990943e-4 + 82*1.008664916 - (136.9070895)
= 1.2338 u
= 931.494061 * 1.2338 MeV
= 1149 MeV
=> 1145/137 = 8.39 MeV/nucleon
To learn more about proton click here:
https://brainly.com/question/29431392
#SPJ4
Which of these statements is true?
A. The largest muscles of the human body are located in the
arms.
B. Bending of arms is controlled by muscles only.
C. The muscles located in the arm have a fixed shape.
D. Bending of arms involves the contraction and relaxation of a pair of muscles.
Answer:
Explanation:
Correct option is (D).
When human body bend at the elbow , then there is contraction of biceps.
After this there is relaxation of biceps and on other hand the triceps contracts so that elbow is straightened.
The statement that is true is bending of arms involves the contraction and relaxation of a pair of muscles. The correct option is D.
What is a contraction of muscles?The process of shortening the sarcomere and, consequently, the whole myocyte during muscle contraction involves the sliding of the thin filaments through the thick filaments.
The tendon transfers the ensuing longitudinal tension from the extracellular matrix (ECM) to the bone. An Action Potential that travels from the nerves to the muscles causes a muscle contraction. The neurological system sends a signal, which triggers the onset of muscle contraction.
The biceps contract whenever the human body bends at the elbow. Following this, the triceps contract while the biceps relax, causing the elbow to straighten.
Therefore, the correct option is D. Bending of arms involves the contraction and relaxation of a pair of muscles.
To learn more about the contraction of muscles, refer to the link:
https://brainly.com/question/28446332
#SPJ2
we combined baking soda with vinegar, according to the chemical equation
NaHCO3 + CH3COOH ==== NaCH3COO + CO2 + H2O
Consider 3 experiments: (i) 2g baking soda + 5mL vinegar, (ii) 2g baking soda + 10mL vinegar and (iii) 2g baking soda + 20mL vinegar. The amount of CO2 produced was highest for (iii) and lowest for (i). For these experiments, which of the following is true?
1). Vinegar ran out first
2). Baking soda ran out first
3). They both ran out at the same time
4). Neither ran out
According to the chemical equation, baking soda is required for evolution of carbon dioxide hence baking soda ran out first.
What is chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.
Learn more about chemical equation,here:
https://brainly.com/question/28294176
#SPJ1
How many total atoms in 3Na3PO4
There are a total of 24 atoms in 3 Na₃PO₄. 9 sodiums, 3 phosphorous and 12 oxygens are there.
What is sodium phosphate ?Sodium phosphate is an ionic compound formed by the loss of electron from sodium atom to the phosphate group. There are 3 sodium atoms in one sodium phosphate Na₃PO₄. One electrons from each sodium atom donates to the phosphate group.
The number of atoms in a compound are written as the subscripts for each chemical symbol. In Na₃PO₄, there are 3 sodium atoms, one phosphorous and 4 oxygen atoms. Thus, there are total 8 atoms.
In 3 Na₃PO₄, thus, contains 8 × 3 = 24 atom. Hence, the total number of atoms in 3Na₃PO₄ is 24.
To find more on Na₃PO₄, refer here:
https://brainly.com/question/15218755
#SPJ1
In the event that a chemical gets in your eye while in the lab, you would use the eyewash station. In your at-home lab, however, which of these courses of action (according to your lab procedure) could be used in lieu of an eye wash station?.
In an at-home lab, the best course of action to take in the event that a chemical gets in your eye is to flush your eye with a clean water source.
What is eye wash station?An eye wash station is an emergency device used to provide immediate and sustained irrigation to the eyes in the event of a hazardous material splash or other accident involving the eyes. It consists of a bowl or basin of potable water connected to a pressurized water source, often with an adjustable flow-control device. Eye wash stations are designed to allow for the user to tilt their head back and irrigate both eyes at the same time, usually for a period of 15 minutes. This is necessary in order to remove hazardous material from the eye before it can cause damage. Eye wash stations should be installed in areas where hazardous materials are handled, stored, or used, as well as areas where workers may be exposed to hazardous materials. They should also be clearly marked and easily accessible in case of an emergency.
This can be done by holding your eye open and running clean water over it for at least 15 minutes. This will help to flush out the chemical and reduce the risk of eye damage. Additionally, it is important to seek medical attention as soon as possible after flushing your eye to ensure that the chemical did not cause any further damage.
To learn more about eye wash station
https://brainly.com/question/20388865
#SPJ4
a. What chemicals are used in the biogas plant process?
b. Is there any dangerous waste being discharged to the environment? If yes list them.
The biogas produced by anaerobic fragmentation has the most content of methane, CO₂, H₂S, and water.
What is biogas?Biogas can be described as a mixture of gases consisting of methane, carbon dioxide, and hydrogen sulfide, formed from raw materials such as agricultural waste, municipal waste, sewage, plant material, green waste, and food waste. Biogas can be described as a renewable energy source.
Biogas can be produced by anaerobic digestion with anaerobic organisms inside an anaerobic digester, bioreactor, or biodigester. Biogas is methane, carbon dioxide, and may have little amounts of hydrogen sulfide, moisture, and siloxanes.
The gases methane and carbon monoxide can be combusted or oxidized with oxygen. This energy release permits biogas to be used as fuel, for any heating purpose, such as cooking. Biogas can be used in a gas engine to transform the energy in the gas into electricity and heat.
In some cases, biogas consists siloxanes. Hydrogen sulfide is corrosive in the biogas stream.
Learn more about biogas, here:
https://brainly.com/question/19153803
#SPJ1