Answer:
the partial of colloidal are smaller and they are not heavy whereas the partial of suspension are larger but they are heavy and less movement thus they settle down due to gravity
(04.01 LC)
Fill in the blank with the correct number to balance the equation: __KCIO3 - 2KCI +
302. (Enter only a whole number.) (3 points)
How much heat is absorbed when 15.0 g of liquid water is
heated until the temperature increases by 6.0°C? The specific
heat of liquid water is 4.18 J/gºC.
Answer:
376.56
Explanation:
using the formula q=mcΔT, where m=15g, C=4.18J/g°C and ΔT=6.0°C
(URGENT!!!!!) the electron configuration of some elements are given. Based on the electron configuration which ELEMENTS can likely form ions with multiple charges?
a) zinc [Ar] 3d¹⁰4s²
b) iron [Ar] 3d⁶4s²
c) sodium [Ne] 3s¹
d) cobalt [Ar] 3d⁷ 4s²
e) silver [Kr] 4d¹⁰ 5s¹
Answer:
iron (Ar) 3d^6 4s^2 and cobalt (Ar) 3d^7 4s^2
Based on the electron configuration of elements Fe and Co can likely form ions with multiple charges.
What is electron configuration?Electron configuration of an element describes how electrons are distributed in its atomic orbitals. Electron configurations of atoms follow a standard notation in which all electron-containing atomic subshells (with the number of electrons they hold written in superscript) are placed in a sequence.
Electron configuration can be written according to the following rules-
1. Aufbau Principle
2. Pauli's exclusion principle
3. Hund's rule
Electrons will be filled according to the increasing order of the energy as per the n+l rule.
Given,
a) zinc [Ar] 3d¹⁰4s²
b) iron [Ar] 3d⁶4s²
c) sodium [Ne] 3s¹
d) cobalt [Ar] 3d⁷ 4s²
e) silver [Kr] 4d¹⁰ 5s¹
Except Co and Fe, all the elements when loose 1 or 2 electrons form full filled electrons, Fe and Co show +2, +3, +4 etc oxidation states.
Therefore, Based on the electron configuration of elements Fe and Co can likely form ions with multiple charges.
Learn more about electron configuration , here:
https://brainly.com/question/29757010
#SPJ7
guess wat Ytuber this is from
"hey guys its joe aka a mothers disappointment."
Answer:
Itlolk
Explanation:
How many moles of Oxygen are in 1 mile of CaCo3?
[tex]\huge\boxed{3moles}[/tex]
_____________________________________Compound:The compound given in the question is [tex]CaCO_{3}[/tex] which is called Calcium Carbonate. A 1 mole of Calcium Carbonate has,
1 Moles of Calcium.
1 Moles of Carbon.
3 Moles of Oxygen.
_____________________________________Question:In the Question, It is asked that how many moles are present in the 1 mole of Calcium Carbonate, So as per information we have, there are 3 moles of oxygen present in Calcium Carbonate.
__________________________________________________________
Much simpler way to understand why there are 3 mole is look at the subscript along the element. There is no number in the subscript of Calcium and Carbon thus 1 Mole, There is 3 present in the subscript thus 3 moles of calcium. Remember that subscript suggests the number of moles of an element in only 1 MOLE OF COMPOUND
_____________________________________Best Regards,'Borz'
Read this excerpt from Eleanor Roosevelt’s "What I Hope to Leave Behind."
As I see it we can have no new deal until great groups of people, particularly the women, are willing to have a revolution in thought; are willing to look ahead . . . are willing to give up constant competition.
By repeating the phrase “are willing” three times, Roosevelt creates a tone of
politeness.
firmness.
triumph.
cooperation.
Answer:
triumph
Explanation:
Because women had been fighting so much that she feels triumphant that they will succeed and they are willing to continue until they reach success
Answer:
triumph
Explanation:
i got it right
Hi can someone help me answer this!
Help pls. Are they a pure substance or mixture?
Answer:
Pizza is difintly a mixture the other i have no idea..im pretty sure CO2 is a substance btw im sorry I wish I could help more Hope this helps! :)
Explanation:
Answer:
Mixture
?
Pure
Pure
Pure
Pure
Mixture
Mixture
Pure
Pure
Mixture
Pure
Explanation:The answers are on google. Im not sure what they mean by hunter.
Calculate the wavelength of radiation with a frequency of 7.13 x 1020 s-1
Answer:
λ = 4.2x10^-13 m
Explanation:
c = λν
c is speed of light 3x10^8 m/s
λ is wavelength
ν is frequency
3.10^8 = λ . 7.13 × 10^20
λ = 4.2x10^-13 m
An electron jumps down from the fourth energy level to the first energy level and releases a light wave of 10.8 nm in wavelength. Determine the energy level value for the fourth energy level for the atom
Answer:
-20.2 * 10^-18 J
Explanation:
From;
E = hc/λ
h= planks constant = 6.6 * 10^-34 Js
c= speed of light = 3 * 10^8 ms-1
λ = wavelength = 10.8 * 10^-9 m
Substituting values;
E = 6.6 * 10^-34 * 3 * 10^8/ 10.8 * 10^-9
ΔE = -1.8 * 10^-17 J
But for ground state E1=−13.6eV or -2.176 * 10^-18 J
From;
ΔE = E4 - E1
E4 = ΔE + E1
E4 = (-1.8 * 10^-17) + (-2. 176* 10^-18)
E4 = -20.2 * 10^-18 J
Which statement best describes the particles in a sample of H2O in the solid phase?Immersive Reader
(10 Points)
They move very quickly and rarely interact.
They move very quickly and frequently collide.
They vibrate in place and have very weak bonds.
They vibrate in place and have very strong bonds.
Answer:
You can describe, the state, the color, the texture, and the odor of matter using your senses. ... As the motion of particles continues to increase, they move even farther apart. ... For example water is normally a liquid at room temperature. When it ... Gases have the most kinetic energy because their particles move very quickly.
Explanation:
Hopefully this helps!
Answer:
They vibrate in place and have very strong bonds.
Explanation:
All solids, in their form, have particles that vibrate in place and strong bonds to keep their form.
why is water being on the moon important?
Answer:
In order for people to survive, we need water. If we wanted to live on the moon, we would need water.
Answer:
Gravity
Explanation:
So water on the moon turns into fine ice dust, when you pour it.
Which orbital diagram is the most stable?
A. 1s ↑↓ 2s ↑↓ 2p ↑↓ ↑↓ ↑
B. 1s ↑↓ 2s ↑↓ 2p ↑↓ ↑↓ ↑↓ 3s ↑↓ 3p ↑↓ ↑↓ ↑↓ 4s ↑↓ 3d ↑ ↑ ↑ ↑ ↑
C. 1s ↑↓ 2s ↑↓ 2p ↑↓ ↑↓ ↑↓ 3s ↑↓ 3p ↑ ↑ ↑
D. 1s ↑↓ 2s ↑↓ 2p ↑↓ ↑↓ ↑↓
E. 1s ↑↓ 2s ↑ 2p 3s 3p ↑
F. 1s ↑↓ 2s ↑↓ 2p ↑↓ ↑↓ ↑↓ 3s ↑↓ 3p ↑↓ ↑ ↑
Answer:
D
Explanation:
Because sub-shell p have maximum no. of electrons I. E. 6
why do chemical equations have to be equal
Answer:
Every chemical equation adheres to the law of conservation of mass, which states that matter cannot be created or destroyed. Therefore, there must be the same number of atoms of each element on each side of a chemical equation.
Explanation:
YW :)
Which manufacturing process is shown in the photograph?
A Combining
B. Separating
c. Forming
D. Conditioning
The manufacturing process shown in the photograph is a process of forming. The correct answer is option C.
Manufacturing processes refer to the series of steps or operations involved in converting raw materials or components into finished products. These processes are designed to transform the materials into the desired shape, form, or functionality.
The photograph shows that, the substance is poured in a mold to create a product of specific geometry. In this case, it is a cube. This process is known as forming processes. It includes techniques like bending, stamping, or forging, which involve shaping materials by applying pressure or manipulating them through dies or molds.
Therefore, the photograph shows the manufacturing process is a process of forming. Option C is the correct answer.
Learn more about Manufacturing processes here:
https://brainly.com/question/33472750
#SPJ2
8. The following system contains 20.0 psi each of gases A and B in the end bulbs with an evacuated bulb in the centre. Both stopcocks are opened at once. What is the new overall pressure in the system?
I literally have no idea how to even start this, I know that the answer is 13.3 psi, but I don't have any clue why or how to get there.
Answer:
13.3
Explanation:
Before opening the stopcocks you have 40psi in total.
After that, those 40psi will be divided into 3bulbs, so 40/3=13.3psi for the system.
How many valence electrons are in Lithium
Answer:
Por ejemplo, el Litio se ubica en el grupo 1A, entonces tiene 1 electrón de valencia.
Explanation
Excepto los grupos 3-12 (los metales de transición), el dígito de las unidades del número de grupo identifica cuántos electrones de valencia se pueden asociar con un átomo neutro de un elemento listado en dicha columna.E
7
Select the correct answer.
Which quantity is a graduated cylinder designed for measuring?
O A. length
ОВ.
mass
O C. temperature
D.
time
O E. volume
WILL GIVE BRAINLIEST Pam and Caroline determined the mass and volume of a piece of metal to be 34.16 g and 11.3 mL respectively. Determine the density of the metal. (Please show work and use significant figures.
Answer:
0.303kg/m
Explanation:
Density=m/v where m is mass
and v is volume
we then convert m in grams to kg
= 34.16/1000
=0.0342kg
converting ml to m
=11.3/100
=0.113m
then density=0.0342/0.113
=0.303kg/m
How do changes in wind currents affect the short-term climate in a region?
Prevailing winds can cause a milder climate with heavy rain.
Global winds can cause a longer summer.
Prevailing winds can cause heavy rains or a dry climate.
Global winds can cause a longer winter.
Answer:
a
Explanation:
Prevailing winds can cause a milder climate with heavy rain is the change that affects the short-term climate in a region, hence option A is correct.
What is wind currents?Concentrated areas of winds are known as air currents. They primarily result from variations in the temperature or atmospheric pressure.
The horizontal and vertical currents are present at the mesoscale, whereas horizontal currents predominate at the synoptic scale.
A region's short-term climate can be dramatically impacted by changes in wind currents. As they move moisture from one place to another, prevailing winds can result in a milder climate with heavy rain.
As a result, the impacted area may see higher precipitation and a more temperate environment.
Therefore, prevailing winds can cause a milder climate with heavy rain can impact the short-term climate in a region.
Learn more about wind current, here:
https://brainly.com/question/31051853
#SPJ5
A sample substance has the chemical formula:
H2CO3
One molecule of the sample contains -
Two different elements with atomic numbers 1 and 27
Two different elements with atomic numbers 1, 6, and 8
Two different elements with atomic numbers 2 and 29
Two different elements with atomic numbers 2, 8 and 20
Answer:
1,6,8
Explanation:
Periodic Table- H=1.C=6,O=8
Hydrogen is H, Carbon is C, Oxygen is O
One molecule of the sample contains three different elements with atomic numbers 1,6 and 8.
What is an element?Element is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.
Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.
The number of protons in the nucleus is the defining property of an element and is related to the atomic number.All atoms with same atomic number are atoms of same element.Each element has its own characteristic property.
Learn more about element,here:
https://brainly.com/question/1812430
#SPJ2
Your question is incomplete, but most probably your full question was,a sample substance has the chemical formula:
H2CO3
One molecule of the sample contains -
Two different elements with atomic numbers 1 and 27
Two different elements with atomic numbers 1, 6, and 8
Two different elements with atomic numbers 2 and 29
Two different elements with atomic numbers 2, 8 and 20
Three different elements with atomic numbers 1,6 and 8
If you want to warm 3.10 g of water from 56.4 C to 82.4 C, how many calories would you need to add to the water?
Answer: 80.6
Explanation:
q = mcAt
we have the grams of water, temp change, and specific heat of water is 4.186 J/g so we can plug in our numbers to find the heat energy in joules
q = (3.10)(4.184)(82.4-56.4)
q= 337.2304 J
we need our answer to be in calories so divide our answer by 4.184 and we get 80.6 calories
The amount of calorie required to warm 3.10 g of water from 56.4°C to 82.4°C is 80.6 calories.
HOW TO CALCULATE CALORIES:
The amount of calories can be calculated by using the formula as follows:Q = m × c × ∆T
Where:
Q = amount of heat in caloriesc = specific heat capacity (J/g°C)∆T = change in temperature (°C)m = mass (g)According to this question, c = 4.184J/g°C, m = 3.10g, ∆T = 82.4°C - 56.4°C = 26°CQ = 3.10 × 4.184 × 26Q = 337.23JSince 1J = 0.2390057361 calories337.23 J = 80.6calories.Therefore, amount of calorie required to warm 3.10 g of water from 56.4°C to 82.4°C is 80.6 calories.Learn more at: https://brainly.com/question/8097823?referrer=searchResults
carol accidentally dropped a container of salt and sodium chloride, into a container of a dark grey metal. carol is pretty sure that the gray metal is iron fillings. using the table above, help carol seperate the two substances
Explanation:
The best way to separate the mixture is by using a bar magnet. We explore the magnetic property of the iron fillings in the mixture to separate it out.
The mixture is spread out thinly on a flat surface. A bar magnet is hovered above the spread of the mixtureThe magnet attracts the iron fillings to itself This will leave the salt behind in the mixture.Centripetal acceleration is in a
Vocab Term
Letter of matching definition
Definition
Proton
E
A) An element containing a charge.
Neutron
K
B) The defined distances away from the nucleus that electrons exist.
Electron
M
C) The electrons exclusively on the outermost energy level
Neutral
L
D) A model of the atom that shows rings for energy levels and the total number of electrons in each energy level
Ion
E) A subatomic particle found in the nucleus with a positive charge
Cation
I
F) A negatively charged ion
Anion
F
G) The different shaped zones where electrons can be found most of the time but have undefined paths within.
Energy Level
L
H) A model of the atom that simply shows the element abbreviation and the number of valence electrons
Orbital
D
I) A positively charged ion
Valence Electrons
J) A model of the atom that shows the truest shape of the atom by showing orbitals stacked on top of each other to form layers of energy levels.
Quantum Mechanical Model
J
K) A subatomic particle found in the nucleus with no charge
Bohr’s Model
L) The state of an atom having no charge
Lewis Dot Structure
H
M) A subatomic particle found outside of the nucleus with a negative charge.
Answer:
E
Explanation:
took the test
Un estudiante de noveno año decide realizar varias mezclas de compuestos quimicos y tiene un frasco rotulado con la formula quimica: MgO ¿cual es el nombre del compuesto?
Answer:
- Oxido de magnesio
Explanation:
Mg → magnesio
O → oxígeno
La unión del oxígeno (no metal) con un metal, forma el determinado óxido que se nombra como óxido de .... y el no metal.
En este caso, podemos deducir que el contenido del frasco es de óxido de magnesio, aunque viendo que hay un sólo átomo de oxígeno podemos llamarlo como monóxido de magnesio, similar al CO (monóxido de carbono).
A partir de que el magnesio sólido entre en contacto con el aire, se produce MgO de acuerdo a la siguiente reacción:
2Mg + O₂ → 2MgO
Write the number of atoms and name of each element in each chemical formula. Use the periodic table
in Canvas for assistance or you may Google Periodic Table.
(Example: CuNO3 - Copper + 3 oxygen
Hi can someone please help me ? I’ll give you brainlest I just started 6th grade I really need help
Explanation:
Sugar=12 carbon+22 Hydrogen+11 oxygen
marble =Calcium+Carbon×3 oxygen
Natural gas=Nitrogen +4 Hydrogen
Rubbing Alcohol=3 carbon +8 Hydrogen+Oxygen
Glass=Silicon +2 oxygen
Answer:
12 Carbon + 22 Hydrogen + 11 Oxygen
Calcium + Carbon + 3 Oxygen
Carbon + 4 Hydrogen
3 Carbon + 8 Hydrogen + Oxygen
SIlicon + 2 Oxygen
Explanation:
Can I have brainliest? TYSMMMMMMMMMMMMMMMMm
Arrange the elements in order of increasing ionization energy. Use the
periodic table to identify their positions on the table.
Drag each tile to the correct box.
Hola
Tiles
chlorine
fluorine
gallium
phosphorus
Sequence
Answer:
Gallium, Phosphorus, Chlorine, Fluorine
Explanation:
Arrange the elements in order of increasing ionization energy. Use the periodic table to identify their positions on the table.
Drag each tile to the correct box.
Tiles
chlorinefluorinegalliumphosphorus
Sequence
Atoms of different element can not have same atomic number because only same type of atoms combine to form element. Atoms belonging to different element can have different atomic number. Therefore, the element arranged in order of increasing ionization energy are Gallium, Phosphorus, Chlorine, Fluorine.
What is element?Element generally consist of atoms or we can atoms combine to form element. Atoms of an element is always same, means all the properties of all atoms of one type of element is same. Two or more than two atoms with different physical or chemical properties can not combine together to form an element.
For neutral atoms, ionization energy is positive, indicating that ionization is indeed an endothermic process. The higher the ionization energy of an atom, roughly speaking, the nearer the outer electrons are to nucleus. The element arranged in order of increasing ionization energy are Gallium, Phosphorus, Chlorine, Fluorine.
Therefore, the element arranged in order of increasing ionization energy are Gallium, Phosphorus, Chlorine, Fluorine.
To know more about element, here:
https://brainly.com/question/8460633
#SPJ2
NH4, C032. OH", and PO43- are all examples of
Answer:
the popultion of it
Explanation:
NH₄+ , (CO₃)₂- , OH- , (PO₄)₃- are all examples of polyatomic ions.
What are Polyatomic ions?A covalent bound type of collection of two or more atoms or of a metal complex that can be said as behaving as a single unit and that has a net charge which is not zero is referred to as a polyatomic ion or a molecular ion.
Depending on the terminology , a polyatomic ion may or may not be referred to as a molecule. The Greek word poly- that means "many," although even ions made of just two atoms are frequently referred to be polyatomic.
A polyatomic ion may also be referred to as a radical (or less commonly, as a radical group).
The term "radical" today refers to a variety of free radicals, which are species with an unpaired electron and do not require a charge.
The hydroxide ion, which has the chemical formula OH- and is made up of one oxygen and one hydrogen atom and has a net charge of 1, is a straightforward example of a polyatomic ion.
A nitrogen atom, four hydrogen atoms, and a charge of +1 make up an ammonium ion, which has the chemical formula NH₄+.
In the context of acid-base chemistry and the production of salts, polyatomic ions are frequently helpful.
A polyatomic ion is frequently thought of as the conjugate base or acid of a neutral molecule. For instance, the polyatomic hydrogen (H₂) sulphate anion (SO₄) is the conjugate base of sulfuric acid (H₂SO₄). The sulphate anion (SO₄)₂ is created when another hydrogen ion is eliminated.
To know more about the similar questions on 'polyatomic ion'
visit- https://brainly.com/question/16843545
#SPJ2
How is kinetic energy of particles and temperature related
Answer:
The higher the temperature, the faster the particles move, the lower the temperature, the slower.