Draw the following neutral molecules and then indicate their charge and how they change when binding metal ions. Name an important protein or bioinorganic complex in which an analogue of each is found. Porphine (or porphyrin) Corrin Chlorin

Answer:

B. Experiments are rarely accurate, so it’s important to keep testing a hypothesis.

Explanation:

Since non-metals (-ve ion) are "stronger" than metals (+ve ion), they may easily obtain electrons from metals. Ionic bonds are created when these two opposing ions are drawn to one another.

The term "metal" refers to any one of a group of materials with high thermal and electrical conductivities, as well as malleability, ductility, and high light reflection.

During the hippy era, when "heavy" indicated serious or profound, the term "metal" is thought to have originated. A few essential elements make up metal music: forceful drumming, extra-low bass notes, and angry or throaty vocals. The guitar riffs and chords are sometimes greatly distorted.

To know more about Metals visit:

https://brainly.com/question/29404080

#SPJ4

The evidence that is showing that Earth’s atmospheres or oceans have changed over time.

Humans have dramatically changed the composition of the atmosphere and increased the amount of greenhouse gases in the environment since the industrial revolution. Long-term changes in our climate result from these gases' ability to make the atmosphere act more like a greenhouse and store more heat.

By condensation from the solar nebula, Earth was created 4.54 billion years ago, or roughly one-third the age of the universe. The primeval atmosphere was likely produced by volcanic outgassing, and others.

Therefore, Due to plant photosynthesis, the amount of oxygen rose. As ammonia reacted with the newly generated oxygen in the atmosphere to create nitrogen and water vapor, its proportion in the atmosphere fell. As it combined with the freshly created oxygen to create carbon dioxide and water, the amount of methane reduced.

Learn more about Earth’s atmospheres from

https://brainly.com/question/26029272
#SPJ1

Answer:

help what is this im so sorry u have to do this

Explanation:

omg

An atomic nucleus, atom, or molecule's ground state is its lowest energy state. Excited states are referred to as higher energy states. Any particle property that has been quantized falls under the ground state.

Atomic ground states and Ground states of vibration, Rotational ground conditions of atoms and molecules, as well as their excited states, are significant.

Most molecules are in their electron and vibrational ground states at ambient temperature; they must be heated to enter excited states.

Since a molecule requires less energy to enter a rotational excited state than an electron or vibrational excited state, the majority of molecules are in an excited rotational state at room temperature.

Therefore, An atomic nucleus, atom, or molecule's ground state is its lowest energy state. Excited states are referred to as higher energy states. Any particle property that has been quantized falls under the ground state.

To learn more about Ground state, refer to the link:

https://brainly.com/question/2289096

#SPJ2

Helium in 1 atm + 273 K, neon at 1 atm, neon at 2 atm, neon at 2 atm, and neon at 73 K

Advertising signs are the main application for neon gas. High voltage indicators are also made of neon, and helium-neon lasers are created by combining neon with helium. As a cryogenic refrigerant, liquid neon is employed.

Neon is extremely volatile and doesn't form any compounds that would allow it to be fixed to solids, which accounts for its relative paucity on Earth as well as the inner (terrestrial) planets. As a result, in the early Solar System, it broke free from the planetesimals while being warmed by the newly ignited Sun.

To know more about neon  visit:

https://brainly.com/question/25174831

#SPJ4

Answer:

Here are the oxidation states for nitrogen in each of the compounds you listed:

a. Li3N - Nitrogen has an oxidation state of +3 in Li3N.

b. NH3 - Nitrogen has an oxidation state of -3 in NH3.

c. N2H4 - Nitrogen has an oxidation state of +1 in N2H4.

d. NO - Nitrogen has an oxidation state of +2 in NO.

e. NO - Nitrogen has an oxidation state of +2 in NO.

f. NO2 - Nitrogen has an oxidation state of +4 in NO2.

g. NO2 - Nitrogen has an oxidation state of +4 in NO2.

h. NO3 - Nitrogen has an oxidation state of +5 in NO3.

i. N2 - Nitrogen has an oxidation state of 0 in N2.

The oxidation state of an element is a measure of the degree of oxidation or reduction that has occurred in a compound. It is determined by the number of electrons that an element has gained or lost in forming a chemical bond.

One of the most widely used explosophores—functional groups that give a compound its explosive properties—in the world is the nitro group. Also strongly electron-withdrawing is the nitro group. This property allows for the possibility of acidic C-H bonds that are alpha to the nitro group (nearby).

The silver-mirror appearance that develops at the end of the reaction serves as a marker for the Nitro group. Tollen's reagent is used to heat hydroxylamine even more. Heating causes hydroxylamine to oxidize into the appropriate nitroso compound and reduce Tollen's reagent to metallic silver.

The prefix "nitro" is added to the name of the matching alkane or arene to create the name of any nitro compound.

To know more about nitro group visit:-

https://brainly.com/question/13028455

#SPJ4

question:-

What type of group is nitro group?

The first and third statements are correct, impossible for every atoms in xef to satisfy this same octet rule.

What is octet rule?

The octet rule is a general chemical principle that represents the idea that main-group elements have a propensity to connect in a way that each atom has eight electrons in its valence shell, giving it the same electronic configuration as a noble gas.

TRUE

The octet rule is not followed by Xe. In fact, it creates ties. It can accommodate more than 8 electrons.

Since Xenon has valence electrons at the fourth energy level, it can reach the fourth sublevel, which gives it access to more than eight electrons. The Xenon is surrounded by 3 lone pairs and 2 bonded pairs of valence electrons in XeF2, which is dsp3 hybridised. The VSEPR forecasts the form to be linear.

The d sublevel is not accessible to elements in the first two periods of the Periodic Table, and they are instead required to abide by the octet rule (or duet H and He rule).

False. (b)

Due to its electrical arrangement of 1s2, 2s2, and 2p4, oxygen is tiny and does not have a vacant d-orbital.

(c) TRUE

Stronger bonds result from stronger bond orders. The bond strength will also be lesser the longer the bond is. One can tell that the NO+ bond will be stronger if they compute the bond order, which is greater for NO+ and the bond length, which is greater for NO-.

D. FALSE

Due to Covalency, the three oxygen forms are bonded. The double bond and single bond will switch places if you design a resonant structure, but in reality, no resonating form can fully explain the structure of ozone; the behaviour of the bond is the average of a single bond and a double bond between the oxygen atoms. There is neither a weaker nor a stronger bond in ozone because both bonds are equivalent.

For more information about octet rule please visit:

https://brainly.com/question/865531

#SPJ4

Green light has a higher frequency and shorter wavelengths than infrared radiation. Option A is correct.

On the electromagnetic spectrum, green light, which is visible light, has a wavelength that falls between 380 nm and 750 nm, while infrared light, which begins at 700 nm and extends to 1 mm, is just beyond it. Because of this, infrared can only be viewed with specialised tools like security cameras.

Due to their longer wavelengths than visible light, infrared waves can travel across crowded areas of gas and dust in space without being significantly scattered or absorbed. In comparison to infrared photons, visible light has shorter wavelengths and higher frequency.

Know more about infrared radiation at:

https://brainly.com/question/11847490

#SPJ1

Buffer solution containing equimolar amounts of PO₄³⁻ and HPO₄²⁻ then

a) PO₄³⁻ + H3O⁺ = HPO₄²⁻ + H₂O

b) HPO₄²⁻ + OH⁻ = PO₄³⁻ + H₂O

A) Add mg to each solution, then watch for gas bubbles to emerge. B) Change the temperature of each solution by adding aqueous sodium hydroxide. C) To determine how bright the light glows, use all solution in an electric circuit containing a battery and a lamp. D) Try the remedies.

Equimolar remedies Equimolar solution are those in which each mole of a solvent is saturated in the same amount of solvent. As a result, all the colliding characteristics also remains the same in a molar ratio solution since both solvents have the same quantity or number of moles.

To know more about Equimolar visit:

https://brainly.com/question/28044054

#SPJ1

The complete question is-

Write an equation to show what happened when, to a buffer solution containing equimolar amounts of PO₄³⁻ and HPO₄²⁻, we add.

a) H3O⁺

_____ + _____ ----> _____ + _____

b) OH⁻

_____ + _____ ----> _____+ _____

please do the math

Divide the imbalanced response into two equal halves. - maintain atomic equilibrium for each half-reaction. To balance oxygen, add H2O to each half-reaction that requires it, and to balance hydrogen, add H+ as necessary.

Redox reactions are oxidation-reduction chemical processes in which the oxidation states of the reactants change. Redox is a shortened version of reduction-oxidation. Two distinct techniques may be used to summarize all redox reactions.

Redox reactions are those in which one chemical is reduced and another is oxidized. Here, oxygen is being introduced, which causes C to oxidize into CO, and oxygen is being withdrawn, which causes ZnO to decrease to Zn. It is a redox reaction as a result.

To know more about Redox visit:

https://brainly.com/question/13978139

#SPJ4

In first reaction alkyne is treated with base to remove proton later alkyne anion react with T20 to form tritium isotope labelled product.

What is reagent?

Reagent is a substance used to bring about a chemical reaction, or added to test if a reaction occurs. In a chemical reaction, one or more reactants are combined to form one or more products. A reagent is typically used to start, speed up, or determine the progress of a reaction. Common reagents include acids, bases, oxidizers, reducing agents, and salts. Reagents can also be used in qualitative or quantitative analysis to detect, measure, or separate chemicals in a sample.

For structure refer attached file
For more information about reagent please visit:
https://brainly.com/question/30024442
#SPJ4

After being treated with a base in the initial reaction to remove the proton, the alkyne anion then reacts with T20 to produce a product labeled with the tritium isotope.

A reagent in a chemical process is what?

In the field of chemical research, a "substance or compound that is given to a system in order to bring about a chemical reaction or is added to check whether a reaction is occurring or not" is referred to as a reagent. A similar response is utilized to validate the discovery of the presence of another drug.

A catalyst can speed up a certain chemical reaction, whereas a reagent is a material or mixture used in chemical analysis or other reactions.

See attached file for response.

To learn more about reagent use link below:

https://brainly.com/question/26905271

#SPJ4

Chemical precipitation occurs when a product is insoluble and precipitates out of a solution. By comparison, precipitation reactions require the reactants to be soluble in the solvent.

To learn more about Chemical precipitation refer :

https://brainly.com/question/11194650

#SPJ1

Answer:  1.) insoluble 2.) soluble

Explanation: EDMENTUM

To calculate the unified atomic mass unit (u) of 13N using the energy of the reaction given in equation (5.28), you can use the following equation:

u = energy / c^2

where energy is the energy of the reaction in joules, c is the speed of light in meters per second, and u is the unified atomic mass unit in kilograms.

First, you need to convert the energy of the reaction from MeV (Mega electron volts) to joules. You can do this using the conversion factor of 1 MeV = 1.602 x 10^-13 joules. Plugging in the values for the energy of the reaction (-3.00 MeV) and the conversion factor, you get:

Energy in joules = -3.00 MeV * 1.602 x 10^-13 joules/MeV = -4.806 x 10^-13 joules

Next, you need to convert the speed of light from meters per second to joules per second. You can do this using the conversion factor of 1 m/s = 1 j/s. Plugging in the value for the speed of light (299,792,458 m/s) and the conversion factor, you get:

c = 299,792,458 m/s * 1 j/s = 299,792,458 j/s

Now you can plug in the values for energy and c into the equation above to calculate the unified atomic mass unit of 13N:

u = (-4.806 x 10^-13 joules) / (299,792,458 j/s)^2 = 1.50 x 10^-27 kilograms

This is the unified atomic mass unit of 13N in kilograms. You can convert this value to atomic mass units (amu) by dividing it by 1.660 x 10^-27 kilograms/amu:

u in amu = 1.50 x 10^-27 kilograms / (1.660 x 10^-27 kilograms/amu) = 0.906 amu

Therefore, the unified atomic mass unit (u) of 13N is approximately 0.906 amu.

Using Benedict's solution, lowering sugars such as glucose, fructose, and maltose produce favorable effects.

A brick-red precipitate that forms as a result of Benedict's reagent's interactions with reducing sugars is a sign that the test is successful.

Indophenol Test in Vitamin C and the Benedict Test of Reducing and Non-Reducing Sugars.An illustration of the protein biuret test.Positive evidence that proteins is present is a color change from blue to purple.

To know more about benedict's test visit:

https://brainly.com/question/25800056

#SPJ4

3.6 atm is the pressure inside the container after 243 mg of magnesium has reacted.

Pressure is defined as the force applied perpendicularly to an object's surface divided by the area over which that force is applied.

The reaction given is: Mg(s) + 2HCl(aq) → MgCl2(s) + H2(g). The moles of H2 gas formed are therefore equal to the moles of Mg that reacted, and can be calculated from: n = 0.243 g/(24.3 g/mol) = 0.01 moles (converting 243 mg to 0.243 g).

The added pressure is calculated by P = nRT/V using approximations: 0.08 L atm/molK for R (0.0821 rounded), 300K for T (303.15 before rounding) and 0.10 L for V.

Solving gives pressure = 2.4 atm. Finally, this number must be added to the initial pressure: 2.4 + 1.2 = 3.6 atm.

To know more about pressure visit:-

https://brainly.com/question/29341536

#SPJ4

Selenium is a chemical element with the atomic number 34 and the symbol Se. It is a nonmetal with properties that are intermediate between sulphur and tellurium in the periodic table, as well as similarities to arsenic.

a) The isotopes have the same number (34) of protons, but a different number of neutrons.

b) 1s^2 2s^2 2p^6 3s^2 3p^6 4s^2 3d^10 4p^4 is the complete electron configuration for a selenium atom.

c) Se' 1st ionization energy is greater than Te because Se is experiencing less shielding than Te, as a result Se' electrons are more attracted to the nucleus compared to Te.

d) Seesaw shape is the shape of the selenium tetrafluoride and the number of electrons is 34. It is polar due to Asymmetry.

To learn more about element Selenium, here

https://brainly.com/question/15062897

#SPJ4

Only BeCl4^2- has a central atom with sp3 hybridization. The other molecules, SF4 and BrO3-, do not have a central atom with sp3 hybridization.

When it comes to identifying which of the following molecules has a central atom with sp3 hybridization, the answer is X. BeCl4^2-. This molecule has a central atom of beryllium, which has an electron configuration of [He] 2s^2 2p^1. In order to form a stable structure, the beryllium atom must use sp3 hybridization, which is a combination of one s orbital and three p orbitals. This hybridization allows the beryllium atom to form four single covalent bonds with the four chlorine atoms, resulting in a tetrahedral shape.

The other molecules, Y. SF4 and Z. BrO3-, have central atoms of sulfur and bromine, respectively. Both of these atoms have an electron configuration of [Ne] 3s^2 3p^4. This allows them to form a stable structure without needing to use sp3 hybridization. Instead, sulfur forms a seesaw shape using sp3d2 hybridization, while bromine forms a trigonal bipyramidal shape using sp3d2 hybridization.

Learn more about hybridization at : https://brainly.com/question/14140731

#SPJ4

Answer:

Jupiter is 5.2 astronomical units from the Sun, at a distance of 484 million miles (778 million kilometres) on average. The distance between the Sun and Earth is one astronomical unit, or AU. Sunlight travels from the Sun to Jupiter at this distance in 43 minutes.

Explanation:

Astronomical unit (AU, or au), a measurement of length that is equivalent to 149,597,870.7 km of the mean or average distance between Earth and the Sun (92,955,807.3 miles).

To know more about Astronomical unit,

https://brainly.com/question/21860092

#SPJ4

2.6×10³Seconds is the time taken by the light to cover the distance from sun to Jupiter.

Time= distance ÷speed

Time=?

Distance= 778,000 000 kilometre

Speed of light is= 3×10⁸

Converting the 778,000 000 kilometre into metre

Since we know that 1 kilometre = 1000 meter

So we will multiply 1000 to the given value 778,000 000 kilometre

So the answered will be,

= 778,000 000,000 meter

Now we can write this value as,

= 778 × 10⁹ meter

Also, = 7.78 × 10¹¹  meter

Now we are putting the values into the above formula that is,

Time= 7.78 × 10¹¹ ÷ 3×10⁸

Time= 2.6 × 10³ Seconds

Jupiter:  Jupiter is the fifth planet from the Sun and is the biggest planet in the Solar System. It is a gas giant with a mass just below one thousandth that of the Sun but greater than 2.5 times that of all the other planets combined in the Solar System.

To know more about Solar visit this:

https://brainly.com/question/28510762

#SPJ1

Magnesium parts are typically attached using mechanical fasteners.

A tool used to mechanically attach (or fasten) two or more things together is known as a mechanical fastener. Although there are many distinct kinds of mechanical fasteners, they can generally be split into two groups: permanent and non-permanent fastening.

There are many different kinds of mechanical fasteners, such as screws, nails, nuts, bolts, washers, anchors, and rivets.

Since World War II, magnesium sheet has been utilized in the transportation sector as a structural material.

For the purpose of attaching magnesium components to various metal substrates, upset protrusion joining was created. Cast and wrought alloys are the two primary divisions of magnesium alloys. Cast alloys made of magnesium are the most common use. Many industries use parts and components made of magnesium and magnesium alloys.

Read more on magnesium here:https://brainly.com/question/25860912

#SPJ1

After solving the equation the volume of the sample is 121.967L.

What is ideal gas equation?

The Ideal Gas Law (also known as the General Gas Equation) states that the pressure, volume, and temperature of an ideal gas are related through the equation PV = nRT, where P is the pressure, V is the volume, n is the number of moles of the gas, R is the ideal gas constant, and T is the absolute temperature. This equation is useful for understanding the behavior of gases and for calculating the amount of gas present in a given volume at a given temperature and pressure.

Using ideal gas equation

PV=nRT

V=nRT/P

n=59.9/44 =1.361 mol

V=[ 1.361×62.3636LmmHg/Kmol×293.15K]÷ 204 mm hg

=121.967L

For more information about ideal gas equation please visit:

https://brainly.com/question/20212888

#SPJ4

The volume of the sample is 121.967L.

Define the ideal gas law.

The ideal gas law, also known as the perfect gas law, is a relationship between a gas's pressure P, volume V, and temperature T in the range of low pressures and high temperatures where the gas's molecules move virtually independently of one another.

The ideal gas law (PV = nRT) connects the macroscopic characteristics of ideal gases. An ideal gas is one in which the particles are both non-repellent and non-attractive to one another (have no volume).

Using ideal gas equation

PV= nRT

V= nRT/P

n= 59.9/44 =1.361 mol

V=[ 1.361×62.3636LmmHg/Kmol×293.15K]÷ 204 mm hg

=121.967L

To know more about ideal gas law use link below:

https://brainly.com/question/27870704

#SPJ4

Here, cathode seems to be the positive electrode and anode is the negative electrode. Positive (+) is the anode and negative (-) is the cathode. Thus, electrons go from the aluminosilicate and niobium

A conductor used to establish contact with the a nonmetallic component of a circuit is known as an electrode. Electrodes are frequently employed in electrochemical cells, semiconductors including diodes, and medical equipment. The electrode is where the transport of electrons takes place.

Electrodes are divided into two categories, cathode and anode, depending on the sort of reaction that takes place in an electrochemical cell. Positive and negative charges, respectively, are present at the cathode and anode.

To know more about electrode  visit:

https://brainly.com/question/17060277

#SPJ4

To solve this problem, we need to use the balanced chemical equation given in the question to determine the relative amounts of the reactants and products. The balanced chemical equation is:Cr2O3 + 2Al → 2Cr + Al2O3We are given that the starting amount is 1 tonne of chromium (III) oxide (Cr2O3), and we want to calculate the mass of aluminium needed to react with this amount. From the balanced equation, we can see that for every 1 mole of Cr2O3 that reacts, 2 moles of Al are needed.1 tonne is equal to 1000 kg, and the molar mass of Cr2O3 is 151.99 g/mol, so 1 tonne of Cr2O3 is equal to 1000 / 151.99 = 6.58 moles of Cr2O3. Since 2 moles of Al are needed for every 1 mole of Cr2O3, 6.58 moles of Al are needed to react with 1 tonne of Cr2O3.The molar mass of Al is 26.98 g/mol, so 6.58 moles of Al is equal to 6.58 x 26.98 = 179 kg of Al. Therefore, the mass of aluminium needed to react with 1 tonne of chromium (III) oxide is 179 kg.To calculate the mass of chromium produced, we can use the same method. From the balanced equation, we can see that for every 1 mole of Cr2O3 that reacts, 2 moles of Cr are produced. Since 1 tonne of Cr2O3 is equal to 6.58 moles, 6.58 x 2 = 13.16 moles of Cr are produced.The molar mass of Cr is 52 g/mol, so 13.16 moles of Cr is equal to 13.16 x 52 = 687 kg of Cr. Therefore, the mass of chromium produced from 1 tonne of chromium (III) oxide is 687 kg.

The balanced chemical equation provided in the question must be used to calculate the proportions of the reactants and products in order to answer this issue. Al2O3 + Cr2O3 = Cr2O3 + Al2O3 is the balanced chemical equation.

Given a starting amount of 1 tonne of chromium (III) oxide (Cr2O3) and need to determine how much aluminum is required for the reaction to occur.

We can see from the balanced equation that 2 moles of Al are required for every 1 mole of Cr2O3 that reacts. Given that 1 tonne is equivalent to 1000 kg and that Cr2O3 has a molar mass of 151.99 g/mol, 1 tonne of Cr2O3 is equal to 6.58 moles of Cr2O3.

In order for 1 tonne of Cr2O3 to react with 6.58 moles of Al, 2 moles of Al must be added for every mole of Cr2O3.6.58 moles of Al are equivalent to 6.58 x 26.98, or 179 kg, of Al since the molar mass of aluminum is 26.98 g/mol.

As a result, 179 kg of aluminum is required to react with 1 tonne of chromium (III) oxide.

We may apply the same procedure to determine the mass of chromium produced. The balanced equation shows that 2 moles of Cr are created for every mole of Cr2O3 that reacts.

Because 1 tonne of Cr2O3 is equivalent to 6.58 moles, the amount of Cr produced is 6.58 x 2 = 13.16 moles.

13.16 moles of Cr are equal to 13.16 x 52 = 687 kg of Cr since the molar mass of Cr is 52 g/mol. Consequently, 687 kg of chromium is created from 1 tonne of chromium (III) oxide.

Know more about aluminum:

https://brainly.com/question/4229590

#SPJ6

The concentration of the HCl (aq) solution was at least 1.0 M.

The abundance of a constituent divided by the sum of the mixture's volumes is the definition of concentration in chemistry. There are several different categories of mathematical description: mass concentration, molar concentration, number concentration, and volume concentration

P = 0.095atm(corresponds to 0.20g of CaCO3

so,moles of CaCO3 =0.20g/100gmol⁻¹=0.002moles

moles of HCl =(molesₓCaCO3ₓ2)=0.002ₓ2

M=0.004/4ₓ100

Concentration of HCl=1M

For more information about concentration please visit:

https://brainly.com/question/10725862

#SPJ4

While tumor marker test results can be useful, they are not conclusive. A low result does not imply that you do not have cancer or that you are in remission.

CA 15-3, for example, is raised in less than half of patients with early breast cancer and in more than 80% of those with metastatic breast cancer. Three tumor markers, cancer antigen 15-3 (CA 15-3), cancer antigen 27.29 (CA 27.29), and carcinoembryonic antigen (CEA), have been used in breast cancer care to help monitor metastatic breast cancer (advanced disease), but they have not been found to be useful in detecting a breast cancer recurrence or extending lives. If the level falls, the treatment is effective. If it rises, the cancer may be spreading.

Learn more about effective here-

https://brainly.com/question/27325201

#SPJ4

Answer:

You could calculate the answer given the formula

M = mol/L

you can get mol using g/MolarMass

=> 42g/22.99g/mol = 1.82688125mol

1.25M = 1.82688125mol/V

=> apply simple algebra
V = 1.4615 L
=> Notice that the answer requires the unit to be ml
V = 1.4615L * 1000ml/L = 1461.5ml

=> Notice that the given grams have 2 sig figs

V = 1500 ml

Answer:

Valence electrons are the outermost electrons of an atom, and the number of valence electrons in a metal can be determined by looking at the element's position on the periodic table. Generally, the columns on the periodic table are arranged in order of increasing valence electrons, except for the transition metals. The element's oxidation state can determine the valence electrons for transition metals.

Explanation:

The equilibrium partial pressure of CO(g) can be maximized by carrying out the reaction at low temperature and low pressure.

According to Le Chatelier's principle, when a dynamic equilibrium is disturbed by an external element, the equilibrium will move in a way that may counteract the effect of the external factor in order to maintain the equilibrium.

The given reaction is-

2CO₂(g)  ⇄  2CO(g) + O₂(g)    (ΔH = -514 kJ)

Now, how does change in pressure and temperature affects the reaction-

Change in pressure:

The equilibrium will move toward the side where there are less moles of gas from the reaction as pressure rises. Additionally, when pressure drops, the equilibrium will move in favor of the side where there are more gas molecules involved in the process.

2.0 moles of gases are on the reactants side (on the left) and 3.0 moles are on the products side (on the right).

Therefore, lowering the pressure will cause the reaction to move to the side where there are more gas molecules (right side, products) and the equilibrium partial pressure of CO(g) can be maximized at low pressure.

Change in temperature:

The sign of H indicates that the reaction is exothermic (negative).

The concentration of the products side will decrease as the temperature drops, so the reaction will be moved to the right to counteract the temperature drop so that the equilibrium partial pressure of CO (g) can be maximized at low temperatures.

Hence the correct answer is low temperature and low pressure.

Know more about Le Chatelier's principle at:

https://brainly.com/question/12099569

#SPJ1

Lattice structures: The correct answer is 2 anions and 3 cations. The unit cell contains a net 2 anions and 3 cations

What are lattice structures?

A lattice structure is a unit cell that fills all available space and may be tessellated along any axis without any spaces between the cells. These structures are a new development in terms of weight, energy, and time savings in modern manufacturing.

Anions are present at 8 corners and in one corner contribution is 1/8

so for 8 corners =(1/8)×8=1

And one anion i at centre and its contribution is one

total anion=2

Cations are present at 6 corners and contribution of one face is 1/2

So, net number of cations is 6×1/2 = 3 cations.

For more information about lattice structure please visit:

https://brainly.com/question/2569423

#SPJ4

The unit cell contains a net 3 cations and 2 anions.

Lattice structures: what are they?

A unit cell that completely occupies its area and can be tessellated along any axis without any gaps between the cells is known as a lattice structure. In terms of weight, energy, and time savings in modern manufacturing, these structures represent a new advance.

Corner atoms are counted as 1/8 of a total atom (just 1/8 of them are inside the unit cell's boundaries).

Atoms in the center count as one whole (whole thing inside the unit cell)

Face atoms are counted as one-half of a unit cell (half inside, half outside).

Therefore, the computation for anions is

1/8 anion at each corner x 8 corners on a cube = 1 anion

+ 1 whole anion

 = 2 anions per cell

The formula for cations is

1/2 cation at each face x 6 faces on a cube = 3 cations per cell

The unit cell contains a net 3 cations and 2 anions.

To know more about atoms use link below:

https://brainly.com/question/6258301

#SPJ4

Answer:

A

Explanation:

Aluminum has only one oxidation state, +3, so no need to specify its oxidation state (III) in its name. Also, ionic compound--between metals and non-metals--do not need a mono, di, or tri added to the beginning of each element's name.