Draw a line l, and take two point A and B on it. Through A and B, draw line L2 and L3 perpendicular to L1. On L2, mark a point C at a ditance 4cm from L1 and draw a line L4 parrallel to L1 through C. If L4 interect L3 at D , what type of quadrilateral i ABDC? ​

The F-statistic for the F-test for joint significance for the variables that are omitted between Regression 1 and Regression 2 is calculated by dividing the difference between the sum of squares of the two regressions by the sum of squares of the omitted variables.

The F-statistic for the F-test for joint significance is a measure of the strength of the relationship between the variables that have been omitted between two regressions. It is calculated by taking the difference between the sum of squares of the two regressions, and dividing it by the sum of squares of the omitted variables. This gives us a value that indicates how well the omitted variables explain the variance in the data. If the value is high, then the omitted variables do explain a significant amount of the variance in the data, indicating that they should not be omitted.

Learn more about regression here

https://brainly.com/question/28178214

#SPJ4

Answer:

y = 3x - 3

Step-by-step explanation:

Answer:

y = 3x + 3

Step-by-step explanation:

When two lines are parallel, this means they have the same slope!

So, first, we are going to take the slope from the equation y = 3x - 11 and use it in our new equation

SLOPE = 3

Next, we use the point-slope formula to make a new equation for the coordinate (4,9) ⇒ x = 4 and y = 9

Point-slope equation = y - y1 = m ( x - x1 )

Let's plug in and solve!

y - 9 = 3 ( x - 4 )

Simplify to turn it into INTERCEPT FORM !

y - 9 = 3x - 12

y = 3x + 3

This is the final answer!

I hope I helped! Let me know if you have any questions about my answer! :)

A chart that compares three sets of values in a three-dimension chart is called surface.

A two-dimensional collection of points (flat surface), a three-dimensional collection of points with a curved cross section (curved surface), or the perimeter of any three-dimensional solid are all examples of surfaces in geometry.

A surface is typically a continuous boundary that separates two areas of a three-dimensional space. For instance, a sphere's surface divides its interior from its exterior, and a horizontal plane divides the half-planes above and below it. Despite the fact that regions they contain are three-dimensional and have a volume, surfaces are basically two-dimensional and have an area. Despite this, surfaces are frequently referred to by the names of the regions they surround. Differential geometry studies the characteristics of surfaces, particularly the concept of curvature.

You can learn more about 3D surface at

https://brainly.com/question/16012416

#SPJ4

Step-by-step explanation:

Given that,QTR =77°

RTS =71°

QTS=QTR+RTS

=77°+71°

=148°

Answer:

∠QTS is 148°

Step-by-step explanation:

To find the measure of ∠QTS we would simply add the angles.

[tex]77+71=148[/tex]

The sum of interior angles in a triangle is 180°

We can check our work by subtracting the adjacent angles from 180.

A right angle is 90°.

[tex]90-77=13[/tex]

[tex]90-71=19[/tex]

[tex]180-13-19=148[/tex]

A rating/review would be much appreciated. Wish you a happy holiday season!

Six unrelated African American people in the United State are elected at random then the probability that  all three have type O+ blood would be 0.103823

The probability that a person in the United States has type O+ blood is 47%. Three unrelated people in the United States are selected at random. Find the probability that  all three have type O+ blood.

Since the probability of having a O+ blood is an independent event, so to find probability that  all three have type O+ blood we will use multiplication rule of independent events as:

0.47*0.47*0.47= 0.103823

Therefore, the probability that  all three have type O+ blood would be 0.103823

learn more about of probability here

https://brainly.com/question/14502506

#SPJ4

Answer:

True

Step-by-step explanation:

The probabilities of all outcomes add to 1.

Answer:

Step-by-step explanation:

Use the formula for a normal dist.

⊕ = sigma

∪ = standard deviation,  mu

f(x) = 1 / (⊕*[tex]\sqrt{2\pi }[/tex])*e^(-1/2*(x-∪/⊕)^2)

A)  f(274) =  1 / (16*[tex]\sqrt{2\pi }[/tex])*e^(-1/2*(274-266/16)^2)

             = 0.022

B  F(246) = 1 / (16*[tex]\sqrt{2\pi }[/tex])*e^(-1/2*(246-266/16)^2)

             = 0.017

The number of adults that can get in the considered elevator if there are 10 children already in it is 4 adults.

Suppose that the capacity of the considered elevator is expressed in the third form (neither in terms of children nor in terms of adults), as 'k'.

So, we have: k = 15 children = 15x (say each children covers x capacity)

and k = 11 adults = 11y (say each adult covers y capacity)

(here, we assumed that capacity is linearly covered, ie if one person covers some capacity, then two people cover the sum of their covered capacity).

It is given that there are 10 children in the elevator right now.

That means, k-10x = 15x -10x = 5x capacity is still remaining.

Converting x to y, as shown below:

[tex]15x = 11y[/tex]

[tex]x= \frac{11y}{15}[/tex]

Thus, 5x is equivalent to:

[tex]5x =5( \frac{11y}{15})[/tex] [tex]= \frac{11y}{3}[/tex]

It is smaller than 4y but bigger than 3y. Therefore, 3 more adults can come in it, as 4 will make the elevator get overloaded.

Thus, the number of adults that can get in the considered elevator if there are 10 children already in it is 4 adults.

The human beings-transferring enterprise has come an extended way because 1852 when Elisha Graves Otis invented the elevator safety brake and inspired a method to a customary hassle—a way to competently flow freight from floor to ground without risking lives and destroying the cargo.

If one is at the pinnacle ground of construction, all elevators will come from beneath (none can come from above), and then go away going down, while if one is on the second from the top floor, an elevator going to the pinnacle floor will skip first on the way up, and then rapidly later on at the way down – consequently, whilst a same.

Once the elevator is falling greater than half of as fast as the speed you get via jumping from rest, jumping reduces your energy and could soften the fall. in case you attempted jumping simply as soon because the elevator started to fall, you'll honestly come to be falling from a more height, and hit tougher.

To learn more about Elevators visit here:

brainly.com/question/29477960

#SPJ4

The degree of freedom for the f-test for anova in a regression model with 4 predictors and 47 observations is  (4,42)

degree of freedom = (k, n - k - 1)

= (4, 47 - 4 - 1)

= (4, 42).

Any statistical test with an F-distribution for the test statistic under the null hypothesis is known as an F-test. In order to determine which statistical model better represents the population from which the data were sampled, it is most frequently applied when contrasting models that have been fitted to data sets.

Exact "F-tests" are typically required after least squares fitting of the models to the data. In honor of Ronald Fisher, George W. Snedecor came up with the name. In the 1920s, Fisher created the statistic as the variance ratio.

To learn more about degree of freedom

brainly.com/question/29588583

#SPJ4

Answer:

+$95

Step-by-step explanation:

We want to write a singles number that can represent this change

We know that David received $95

When someone receive something, it is positive

So to represent this, we simply put +$95

David made a profit of 95 dollars as a result of the transaction. As a result, you display this as a positive signed number, which is +95.

Positive numbers are generally used to express positive changes in the world of mathematics, especially when working with signed numbers. In order to describe a change of 95 dollars given to David, you would use a positive signed number, which in this case would be +95. You can tell that this was an increase or gain by putting the plus symbol (plus) before the 95; in this case, David made a profit of 95 dollars.

https://brainly.com/question/10751292

#SPJ2

Answer:

B

Step-by-step explanation:

Shortest time taken for a is 0.666hours and for b is 0.866hours.

Take a variable x on the possible road. Evaluate an equation of time in terms of x and find the extrema of the function. To find extrema differentiate the function and equal it to zero. Then find the roots of equation to get the extreme value, which should be the minimum time path.

A is initial point

P is oasis

S is intermediate point

Let us assume he directly reaches  x km from N at S.

then AS=[tex]\sqrt{100+X^2}[/tex] and SP=20-X

Time taken:

[tex]\frac{\sqrt{100+X^2}}{30}[/tex]+[tex]\frac{20-X}{50}[/tex]

Differentiating it and putting this to zero gives extrema value

[tex]\frac{2x}{60(\sqrt{100+X^2})}[/tex]=[tex]\frac{1}{50}[/tex]

⇒[tex]\frac{50x}{30}[/tex]=[tex]\sqrt{100+X^2}[/tex]

⇒By squaring on both sides

⇒100+X^2=[tex]\frac{25x^2}{9}[/tex]

⇒x=7.5km

x is independent of PN as while differentiating PN term became 0

Now time:

a) t= [tex]\frac{\sqrt{100+7.5^2}}{30}[/tex]+[tex]\frac{20-7.5}{50}[/tex]=0.666hours

b) t=[tex]\frac{\sqrt{100+7.5^2}}{30}[/tex]+[tex]\frac{30-7.5}{50}[/tex]=0.866hours

Shortest time taken for a is 0.666hours and for b is 0.866hours.

To refer more about Shortest Path, visit:

https://brainly.com/question/22845464

#SPJ1

Answer:

B

Step-by-step explanation:

they have same slopes,the slopes is 1/2,it mean they can't intersect

If a and b are independent events with p(a) = 0.38 and p(b) = 0.55, then p(a | b) = 0.38

In the given question, a and b are independent events with p(a) = 0.38 and p(b) = 0.55, then we have to find p(a | b).

Events classified as independent do not depend on other events for their occurrence.

The likelihood of both A and B happening is equal to the sum of the probabilities of A and B, which is how mathematics expresses the independence of events A and B.

If A and B are independent events, then

P(A and B) = P(A) * P(B)

Then P(A | B) = P(A and B) / P(B)

P(A | B) = P(A) * P(B) / P(B)

P(A | B) = P(A) = 0.38

Hence, if a and b are independent events with p(a) = 0.38 and p(b) = 0.55, then p(a | b) = 0.38.

To learn more about independent events link is here

brainly.com/question/22881926

#SPJ4

The inequalities for the equation -7x + 3y ≤ 15 is [tex]x\ge \frac{-15+3y}{7}[/tex] and 6x - 5y < 12 is [tex]x < \frac{12+5y}{6}[/tex]

What is inequalities ?

An inequality in mathematics is a relation that compares two numbers or other mathematical expressions in an unequal way. The majority of the time, size comparisons between two numbers on the number line are made.

In mathematics, "inequality" refers to a relationship between two expressions or values that are not equal to one another.

Inequality of wealth (the distribution of wealth across households or individuals at a particular point in time), inequality of opportunity (the impact on income of circumstances over which individuals have no control, such as the availability of jobs), and lifetime inequality (the inequality in incomes for an individual over his or her lifetime) are all related concepts.

- 7x ≤ 15 - 3y

(-7x)(-1) ≥ 15 (-1) - 3y(-1)

7x ≥ -15 + 3y

Dividing by 7 we get

[tex]x\ge \frac{-15+3y}{7}[/tex]

6x < 12 + 5y

Dividing by 6 we get

[tex]x < \frac{12+5y}{6}[/tex]

To learn more about inequalities from the given link  

https://brainly.com/question/24372553

#SPJ1

Answer: see below

Step-by-step explanation:

They intersect at the point (2,6) which is the solution

Step-by-step explanation:

since the roller coaster takes always 8 people at a time, this problem is simply to find how often 8 fits into 346 and how many people are remaining (when we cannot fill all 8 places anymore at the end).

that is what division is for.

346 / 8 = 43 and remainder 2

as 8×43 = 344, plus 2 is then 346.

so, the remainder (2 people) will be on the last ride.

To find the number of people on the last ride of the roller coaster, divide the total number of people waiting in line by the number of people the roller coaster can fit at a time.

To find the number of people on the last ride of the roller coaster, we need to divide the total number of people waiting in line by the number of people the roller coaster can fit at a time. In this case, we have 346 people waiting and the roller coaster can fit 8 people at a time. Dividing 346 by 8 gives us 43 with a remainder of 2. This means that there will be 43 full rides, and on the last ride, there will be 2 people left.

https://brainly.com/question/33969335

#SPJ2

Standard Deviation of given set of numbers is 0.71

The two key areas in statistics are variance and standard deviation. It is a metric for statistical data dispersion. The degree to which values in a distribution deviate from the distribution's average is known as dispersion.

The standard deviation is a metric that reveals how much variance from the mean there is, including spread, dispersion, and spread. A "typical" variation from the mean is shown by the standard deviation. Because it uses the data set's original units of measurement, it is a well-liked measure of variability. When data points are closely spaced from the mean, there is a small variation, and when they are far spaced from the mean, there is a large variation.

Standard Deviation Formula:

σ=[tex]\sqrt{\frac{sigma(xi-m)^2}{n} }[/tex]

Given 6,4,5,5

m=[tex]\frac{6+4+5+5}{4}[/tex]=5;

⇒σ=[tex]\sqrt{\frac{(6-5)^2+(4-5)^2+(5-5)^2+(5-5)^2}{4} }[/tex]=0.707≅0.71

Standard Deviation of given set of numbers is 0.71

To refer more about Standard Deviation, visit:

https://brainly.com/question/475676

#SPJ1

Crew 1 more worker-days to repave the same distance, it is also clear that they required more worker-day per mile than Crew 2.

True. Crew 1 worked a total of 12 worker-day.

True. Crew 1 repaved the highway at a rate of 12 mile per day.

True. Crew 2 repaved the highway at a faster rate than Crew 1.

True. Crew 1 required more worker-day per mile than Crew 2.

True. Crew 2 repaved the highway at a rate of 1.3 worker-day per mile.

Crew 1 - 6 workers and 4 days of work = 24 worker-days to repave 2 miles of highway. This means that Crew 1 repaved the highway at a rate of 12 miles per day.

Crew 2 - 8 workers and 5 days of work = 40 worker-days to repave 3 miles of highway. This means that Crew 2 repaved the highway at a rate of 1.3 worker-days per mile.

Since Crew 2 repaved the highway in fewer worker-days, it is clear that they repaved the highway at a faster rate than Crew 1. Additionally, since it took Crew 1 more worker-days to repave the same distance, it is also clear that they required more worker-day per mile than Crew 2.

Learn more about distance here

https://brainly.com/question/28956738

#SPJ4

The vertex of the absolute value function f(x) = (-2/3)*|x + 4| is:

(-4, 0)

Here we have the following absolute value function:

f(x) = (-2/3)*|x + 4|

The x-value of the vertex is the one that makes the argument of the absolute value part equal to zero, so we will get:

x + 4 = 0

x = -4

To et the y-value of the vertex we evaluate the function in x = -4, we will get:

f(-4) = (-2/3)*|-4 + 4|

f(-4) = 0

Then the vertex of the absolute value function is (-4, 0).

Learn more about absolute value functions:

https://brainly.com/question/3381225

#SPJ1

Answer:

Point C

Step-by-step explanation:

The 99% confidence level produces the most comprehensive interval due to the increase in critical value.

99%, because, as the level of confidence increases, zc increases.

The level of confidence is the probability that actual value will fall in the confidence interval determined using sample statistics. As the probability increases, the area (middle part) under the curve expands, which results in increasing the critical value(zc) that determines the acceptance region.

The increase in the critical value results in increasing the margin of error, which defines the confidence interval's spread from the mean value of the distribution.

Hence, the 99% confidence level produces the most comprehensive interval due to the increase in critical value.

For such more questions about confidence interval:

https://brainly.com/question/19252254

#SPJ4

The 5th value of the 60% percentile is 47 when for each test score in the data set is 12, 28, 35, 47, 49, 50.

Given that,

For each test score in the data set, the percentile rank is determined. 12, 28, 35, 42, 47, 49,  

We have to find what number represents the 60% of the population.

We know that,

So,

Percentile rank =[(Number of values below x)+0.5]/ total number of values × 100

For 12,

Percentile rank = [0 +0.5]/7×100

= 7th

For 28,

Percentile rank = [1 +0.5]/7×100

= 21st

For 35,

Percentile rank = [2 +0.5]/7×100

= 36th

For 42,

Percentile rank = [3 +0.5]/7×100

= 50th

For 47,

Percentile rank = [4 +0.5]/7×100

= 64th

For 49,

Percentile rank = [5 +0.5]/7×100

= 79th

For 50,

Percentile rank = [6 +0.5]/7×100

= 93rd

Now,

n = 7

60th percentile = 60% of n

So,

60% of n = 60/100×7

= 0.6×7

= 4.2

Therefore, The 5th value of the 60% percentile is 47 when for each test score in the data set is 12, 28, 35, 47, 49, 50.

To learn more about percentile visit: https://brainly.com/question/1594020

#SPJ4

Answer: z=10, y=7

Step-by-step explanation:

z+30=40

y+10=17

solve for z by isolating z, Subtract 30 from both sides

z+30-30=40-30

z=10

solve for y by isolating y, Subtract 10 from both sides

y+10-10=17-10

y=7

Answer:

The correct answer is (b) SSA.   -- -- Read carefuly for total understanding

Step-by-step explanation:

In geometry, congruence is a relationship between two figures that means they have the same size and shape. In other words, congruent figures can be perfectly superimposed on one another. There are several criteria that can be used to determine whether two triangles are congruent.

However, the SSA (side-side-angle) criterion does not guarantee that two triangles are congruent. In other words, just because two triangles have two sides and the included angle congruent does not necessarily mean that the triangles are congruent. This is why the answer is (b) SSA.

Answer:

Dilation

-by-step explanation:

the figure is dilated (larger than original)