The car will be going with the speed of 20m/s in 5 seconds.
It is provided that a car is starting from the rest and has a constant acceleration of 4m/s².
The time taken by the car during its motion is 5 seconds.
Using the first equation of motion,
V = U+at
Where,
V is the final velocity,
U is the initial velocity
a is the acceleration and,
t is the time taken by the car during the motion.
Now, putting all the values accordingly,
V = 4 × 5
V = 20 m/s.
So, the car will be going at a speed of 20m/s in 5 seconds.
To know more about equation of motion, visit,
https://brainly.com/question/25951773
#SPJ4
if c1 = 25µf, c2 = 20µf, c3 = 10µf, and ∆v0 = 21v , determine the energy stored by c2.
The energy stored by c2 is =0.00144478
As per the details share in the above question are as bellow,
The value of the capacitor is ,c1 = 25µf, c2 = 20µf, c3 = 10µf.
While the potential difference is ∆v0 = 21v.
We have to determine the energy stored by c2?
In order to accomplish labor and to produce heat and light, energy must be transmitted to a body or to a physical system. Energy is the quantitative attribute that does this.
When the capacitors are connected in parallel then,
Ceq'= c2+c3= 20+10=30
When the capacitors are connected in series then
Capacitors in series (1/Ceq)=(1/c1)+(1/ceq')= (1/25)+(1/30)
Ceq=13.63μF
Now Energy is equal to one by two into c into v square,
[tex]E=\frac{1}{2} CV^2[/tex]
Substitute the value in above equation we get,
Energy[tex]=\frac{1}{2} (13.63 \times 10^{-6})\times (212)[/tex]
E=0.00144478
For such more question on Energy.
https://brainly.com/question/13881533
#SPJ4
Note:- The correct question would be as follow,
if c1 = 25µf, c2 = 20µf, c3 = 10µf, and ∆v0 = 21v , determine the energy stored by c2.
Can someone help me in this question?
Answer:
3×x for both .they did the same amount.
A woman of ma 54 kg jump off the bow of a 48 kg canoe that i intially at ret. If her velocity i 2 m/ to the right, what i the velocity of the canoe after he jump? Anwer in unit of m/ˆı
The velocity of canoe will be 27 m/s.
Explain what conservation of momentum is.According to the rule of conservation of momentum, absent an external force, the combined momentum of two bodies operating upon one another in an isolated system kept static. As a result, momentum cannot be gained or lost.
How to calculate the velocity of the canoe?Given, mass of the woman, m = 54 kg
mass of canoe, M = 48 kg
velocity of woman, v = 2 m/s
The principle of momentum conservation results in,
pi = pf
0 = mv - Mu
mv = Mu
u = mv/M
u = 54×2/48
u = 27 m/s
The velocity of canoe will be 27 m/s.
To know more about conservation of momentum visit
brainly.com/question/24989124
#SPJ4
Describe the work done while you apply force on the box and after you let go
Explanation:
If you apply a force on a box and push it across a surface, you are doing work on the box. The amount of work done is equal to the force applied multiplied by the distance the box moves in the direction of the force. This means that if you apply a greater force or move the box a greater distance, you will do more work on the box.
Once you let go of the box, the work that you did on the box is no longer being applied, and the box will come to a stop unless there are other forces acting on it (such as gravity or friction). If the box is on a horizontal surface and there is no friction, it will not move at all after you let go, and the work you did on it will be completely converted into kinetic energy (the energy of motion). If the box is on a sloping surface or there is friction, the kinetic energy will be converted into other forms of energy, such as heat, and the box will slow down and eventually stop.
Which of these events moves small pieces of rocks away from where they originally formed?
Answer: The answer should be Erosion
Explanation: Erosion removes and transports rock and soil. Additionally, it also moves sediment through water, ice, and wind.
what is the speed of an electron that has the same momentum as a photon with a wavelength in vacuum of 488 nm the mass of an electron is 9.11*10^-31 kg
With a vacuum wavelength of 488 nm and an electron mass of 9.11*10^-31 kg, an electron travelling at 1490.45 m/s has the same momentum as a photon.
The pace at which the distance a moving item travels changes is measured as speed. Since speed is a scalar, it has magnitude but no direction as a unit of measurement. Speed is the rate at which anything moves over a predetermined distance. The elementary electric charge of the electron, sometimes known as the symbol e or, is a negative one. Given that they have no known components and are part of the first generation of lepton particles, electrons are frequently regarded as being elementary particles to its wavelength.
E = mc^2
mc^2 = hc/(lamda)
v = h/m(lamda)
v = 6.626*10^-34/9.11*10^-31*488*10^-9
v = 1490.45 m/s
Learn more about wavelength here
https://brainly.com/question/13533093
#SPJ4
A slender, uniform metal rod of mass M and length lis pivoted without friction about an axis through its midpoint andperpendicular to the rod. A horizontal spring, assumed massless andwith force constant k,is attached to the lower end of the rod, with the other end of thespring attached to a rigid support.
Find the torque tau due to the spring.
The torque due to the spring is τ = kx × (l/2).
The torque is a measure of the rotational force that can cause an object to rotate about an axis. It is defined as the product of the magnitude of the force and the perpendicular distance from the line of action of the force to the axis of rotation.
The torque due to a spring is the force of the spring multiplied by the distance from the spring's axis of rotation. This torque is also known as spring torque.
The torque due to the spring is given by:
τ = F × r
Where F is the force exerted by the spring and r is the distance between the pivot point and the point at which the spring is attached to the rod.
Since the spring is assumed to be massless and has a force constant k, then the force is given by:
F = kx
Where x is the displacement of the end of the rod to which the spring is attached.
Since the rod is pivoted at its midpoint, then the distance between the pivot point and the point at which the spring is attached is:
r = l/2
Therefore, the torque due to the spring is given by:
τ = kx × (l/2)
Where k is the force constant of the spring, x is the displacement of the end of the rod to which the spring is attached, and l is the length of the rod.
For more questions like Torque click the link below:
https://brainly.com/question/29821190
#SPJ4
the larger player on the left and the smaller player on the right push against each other. who fees the greater force?
Answer:
The players feel equal force against one another.
Explanation:
This is known from Newton's Third Law of Motion which states that for every action/force there is an equal and opposite reaction/force. Therefore, even if one player is larger, the force exerted on each player from the other is the same.
a 200-n force is applied as shown to the bracket abc. determine the moment of the force about a
The moment of the force about A will be 14150.97 N-m Force = 200 N
A force's moment is determined by its magnitude and distance from the rotating axis. The moment of a force around a point measures the force's strength (the perpendicular distance of the line of action of the force from the point). The turning effect of a force is known as its moment. The moment of force, sometimes referred to as the torque. A moment must develop because of a force F, which prevents the line of action from passing through the location where the moment is to be taken. If the line of action does not travel through that location, the moment is zero since the magnitude of the moment arm is 0.
[tex]amp; \vec{F}=200\left(-\cos 30^{\circ} \hat{j}+\sin 30 \hat{k}\right) M \\& \vec{F}=200 \cdot\left(\frac{-\sqrt{3} \hat{\imath}+\hat{k}}{2}\right)=100(-\sqrt{3} \hat{\jmath}+\hat{k}) M \\& \overrightarrow{r_A}=-50 \hat{\jmath}, \quad \vec{r}_C=60 \hat{i}+25 \hat{1} \\& \Rightarrow \quad \vec{r}_{C A}=\vec{r}_e-\vec{r}_A=60 \hat{\imath}+755[/tex]
Moment of F about A -
[tex]amp; \vec{M}_A=\vec{\pi} A \times \vec{F}=(60 \hat{+}+75 \hat{1}) \times(100(-\sqrt{3} \gamma+\hat{k}) \\& \vec{M}_A=100\{-\sqrt{3} .60 \hat{k}-60 \hat{\imath}+0+75 \hat{\jmath}\}[/tex]
[tex]\vec{MA}=7500 i-6000 i-6000 \sqrt{3} \hat{N} N-m\\\\\mid \vec{MA}|_A=14150.97 N-m[/tex]
For more questions on Moment of force
https://brainly.com/question/26117248
#SPJ4
what happens to the electric potential energy of the positive charge, after the charge is released from rest in the uniform electric field?
The potential energy decreases, converted to kinetic energy. velocity is increasing and potential energy is decreasing.
What is velocity?velocity is a term that describes the speed and direction of a point's motion. For example, a circular path's direction is always perpendicular to a lines from the point to the circle's center. A point always travels in a position that is tangential to its path (a radius). An object's ultimate velocity can be expressed as: v = u + at, where v is the final velocity. The ultimate velocity of an boody is equivalent to its original velocity with acceleration directly proportional to the displacement it traveled.
An scalar or a vector, what is velocity?Speed is a scalar since it simply has a defined magnitude and no defined direction. A vector quantity with both magnitude and direction is velocity.
To learn more about velocity visit:
https://brainly.com/question/18084516
#SPJ4
a slingshot fires a pebble from the top of a building at a speed of 14.0 m/s. the building is 31.0 m tall. air resistance is negligible. (a) calculate the speed with which the pebble strikes the ground when the pebble is fired horizontally. (b) calculate the speed with which the pebble strikes the ground when the pebble is fired vertically. (c) calculate the speed with which the pebble strikes the ground when the pebble is fired vertically straight down.
(A) The pebble's final speed after being fired horizontally is 14 m/s. (b) When launched vertically and straight up, the projectile's terminal velocity is zero. (c) The pebble's terminal speed when fired vertically and directly downward is 28.31 m/s.
What are examples of resistance?The degree to which an object obstructs or resists an electric current is referred to as resistance. The movement of electrons is referred to as electric current. Consider the scenario of a person navigating a busy market and encountering difficulty moving from one shop to another to better understand resistance.
What results in opposition?This is due to the fact that resistance is brought about by an interaction between the conductor's atoms and electrons. Longer conductors in this situation will result in more collisions and higher resistance because of this. Inversely correlated to a conductor's cross-sectional area is the conductor's resistance.
To know more about Resistance visit:
https://brainly.com/question/11431009
#SPJ4
the atmosphere, and space. the numbers express units, in relative terms, of the total incoming solar or outgoing infrared energy how many units of energy are absorbed by earth's surface?
51 units of energy are absorbed by the earth's surface.
23 of the 51 solar radiation units that the Earth's surface absorbs are utilized to evaporate water, resulting in a 23-unit loss of heat. Convection and conduction, which both result in heat loss at the Earth's surface, employ 7 units each. The leftover units of the initial 51 units of solar energy are released as departing infrared radiation, commonly referred to as terrestrial radiation, from the surface of the Earth. However, instead of radiating 21 units (51-23-7 = 21), Earth emits 117 units away from the surface. This occurs because the Earth only receives solar radiation during the day and emits infrared radiation both during the day and at night. Of these 117 units, only 6 are sent into space past Earth's atmosphere. The 111 more units of infrared light that the Earth's surface released into the atmosphere are absorbed by clouds and greenhouse gases.
Want to know more about solar energy visit the link which is given below;
https://brainly.com/question/27203456
#SPJ4
a spacex rocket is sometimes used for trips from cape canaveral in florida to the international space station, which is in orbit in the thermosphere. as the rocket moves upwards away from the earth, towards the international space station, it uses a lot of fuel. as the rocket uses fuel, its overall mass decreases. how will this decrease in mass impact the gravitational force between the earth and the rocket?
The Mass Increase the thrust force and increase the mass of the rocket between the earth and the rocket .
At full throttle, the net thrust of a rocket motor increases somewhat with altitude because the pressure thrust term increases as atmospheric pressure lowers with height. The rocket accelerates more quickly the faster its fuel is burned. The acceleration increases with decreasing rocket mass.
Similar to the horizontal example, a rocket with more mass will accelerate more slowly, but there is also another result. Because gravity is now forcing the rocket downward rather than up, there is less force pushing the rocket upward as a result.
To know more about thrust force visit :
https://brainly.com/question/863770
#SPJ4
which term best describes the amount of variation, over or under the required size, permitted on a piece of machined work?
"frequency" describes the amount of variation, over or under the required size, permitted on a piece of machined work.
When a wave changes media, what happens to its velocity, frequency, and wavelength?the wave's frequency as well as its wavelength. The wave moves at the same speed no matter what the medium. However, pace varies depending on the medium. The characteristics of the medium affected how fast these waves traveled.
How can variations in amplitude and wavelength affect sound speed?Note: The speed of sound is unaffected by changes in the wavelength of the sound wave. The amplitude of the sound wave diminishes as the distance from the source grows. The density of the medium affects how quickly sound travels.
To know more about frequency visit:-
https://brainly.com/question/14316711
#SPJ4
the force required to start an object sliding across a uniform horizontal surface is larger than the force required to keep the object sliding at a constant velocity. the magnitudes of the required forces are different in these situations because the force of kinetic friction
Answer: The force of kinetic friction is smaller than the maximum force of static friction due to the fact that the coefficient of kinetic friction is less than that of static friction.
what is the pressure p(r)p(r)p(r) of the fluid in the test tube at an arbitrary distance rrr from the axis of rotation?
The pressure p(r)p(r)p(r) of the fluid in the test tube at an arbitrary distance rrr from the axis of rotation is p(r) = ρω²/2 (r²-ro²) + Po
The following figure shows the test tube filled with water spinning with angular velocity ω
The centripetal force acting on the particle of mass dm at a distance x is, F = dmω²x
The mass dm is given as,
dm = ρdv
= p Adx
Therefore, the force is,
F = ρAω²x dx
The pressure is force per unit area. Therefore, the pressure can be determined as follows:
P(r) = ρω²[tex][\frac{x^{2} }{2} ]^{r} _{r0} +Po[/tex]
Hence, the pressure is,
p(r) = ρω²/2 (r²-ro²) + Po
1 based on or influenced by one's own whims, biases, etc.; capricious. 2 not being absolute; merely having a relative use or importance. 3 tyrannical or dictatorial (of a government, ruler, etc.). 4 (Math) does not represent any particular value.
Learn more about Pressure here:
https://brainly.com/question/29341536
#SPJ4
if the frequency of ultrasound in increased from 0.77 mhz to 1.54 mhz, what happens to the propagation speed?
If the frequency of ultrasound in increased from 0.77 mhz to 1.54 mhz, the propagation speed is remains same.
Since these are not modifications to the characteristics of the medium, changing the frequency or amplitude of the waves will not alter their speed. In a particular medium, the speed of propagation is constant; only the wavelength varies as the frequency does. Your physical, emotional, and mental bodies feel lighter as your energy or vibration frequency rises. More inner strength, clarity, tranquility, love, and joy are felt by you. Your physical body experiences little or no pain or suffering, and you can manage your emotions with ease.
To learn more about frequency visit:https://brainly.com/question/5102661
#SPJ4
a skydiver is falling at a constant velocity with a not yet opened parachute identify the forces exerted on the object
When a skydiver is falling at a constant velocity with a not yet opened parachute, then the main force exerted on the object gravity.
What is the force exerted on object when skydiver is falling at constant velocity?When a parachutist leaves the plane with the chute not open, then the main force acting is gravity. As speed through the air increases, then the air resistance also increases.
At 'terminal velocity', which is around 200 km/h, air resistance force balances gravitational force and parachutist stops accelerating and falls at constant velocity. When the parachute is open, then air resistance is greater due to the greater surface area.
To know more about forces, refer
https://brainly.com/question/12970081
#SPJ4
An object is launched at a velocity of 20 m/s in a direction making at an angle of 25⁰ upward with the horizontal. Find
(a) The maximum height reached by the object.
(b) The magnitude of the velocity of the object before it hits the ground.
Answer:
below
Explanation:
Vertical position = vo t + 1/2 at ^2
where vo = 20 sin25 =8.45 and a = -9.81 m/s^2
Vertical position = - 4.905 t^2 + 8.45 t
max will occur at t = -b/2a = -8.45 / (2* -4.905) = .861 s
Plug in this value to find vertical height
vertical position = 8.45(.861) - 1/2 (9.81)(.861)^2 = 6.92 m
b) magnitude when it comes down = magnitude when it went up = 20 m/s
for a particular process q = 20 kj and w = 15 kj. which of the following statements is true?
For a particular process q=-17 kJ and w=21 kJ. The following statements are true:
(a) Heat flows from the system to the surroundings
(d) The process is exothermic
E=q+w, where q is the amount of heat flowing into or out of the system, is the first law of thermodynamics.
Heat enters the system when q is positive, and heat exits the system when q is negative.
Workflow into or out of the system,
Work is done on the system when w is positive, and the system performs work when w is negative.
E is the system's overall internal energy change.
Q+W = 17 kJ + 21 kJ = + 4 kJ
As a result, the statement in (c) is correct.
Since q is negative in this case at -17 kJ, the process is exothermic, releasing heat from the system generally into the environment.
Thus, the assertion in (d) is true.
As q has a negative value, this indicates that heat is transferred from the system into the environment.
Therefore, the assertion in (a) is true.
Now that w is a positive number, the system is receiving work. Therefore, the assertion in (b) is false.
Since statement b. is untrue, statement e. is also false.
As a result, the assertion in (e) is false.
For more questions on first law of thermodynamics
https://brainly.com/question/26035962
#SPJ4
The complete question should be:
For a particular process q=-17 kJ and w=21 kJ. Which of the following statements is true?
Heat flows from the system to the surroundings
The system does work on the surroundings
E=+4 KJ
The process is exothermic
None of the above is true
A vehicle undergoes acceleration when it
Speeds up
Slow down
Change direction
All of the above
Answer:
ALL OF THE ABOVE
Explanation:
A vehicle undergoes acceleration when what three things happen?
it gains speed, decreases speed, and changes direction .If there is acceleration, the velocity will change, either increasing or decreasing. The correct answer is D.
What is acceleration?The rate of growth of velocity is defined as acceleration. Acceleration usually indicates that the speed is changing, but this is not always the case. When an object is in motion in a circular track at a steady speed, it is still going to accelerate because its velocity direction changes.
Newton's Second Law states that an object's acceleration is the net result of all force applied to it. Acceleration is measured in meters per second squared.
The formula is given as,
a = Δv / Δt
If acceleration exists, the change of the velocity will be there and it may be increasing or decreasing. Then the correct option is D.
More about the acceleration link is given below.
https://brainly.com/question/12550364
#SPJ5
FILL IN THE BLANK. in a px orbital, the subscript x denotes the __________ of the electron.
In a px orbital, the subscript x denotes the axis along which the orbital is aligned of the electron.
'What is atomic orbital?'
The area closest to an atomic nucleus where an electron is most likely to be found is called an atomic orbital. An atom's orbitals can be classified as either s, p, d, or f orbitals. The Px, Py, and Pz orbitals are three of the p orbitals that exist.
The Px, Py, and Pz orbitals all have two lobes, but the Py orbital has two lobes directed along the y-axis, and the Pz orbital has two lobes oriented along the z-axis. This is the main distinction between the three orbitals. Because of how they are oriented in space, the Px Py and Pz orbitals differ from one another.
know about electrons here
https://brainly.com/question/1255220#
#SPJ4
a distant observer looks at the surface of a neutron star of 2m and radius of 11 km. how many seconds elapse for this distant observer for every 1 second measured on the surface of the star?
A distant observer looks at the surface of a neutron star of 2m and radius of 11 km. 16.06 seconds are elapse for this distant observer for every 1 second measured on the surface of the star.
The collapsing core of a large supergiant star with a total mass of between 10 and 25 solar masses—possibly even more if the star was very metal-rich—is what we refer to as a neutron star. Neutron star are the tiniest and densest class of stellar objects currently known, with the exception of black holes and some hypothetical objects (such as white holes, quark stars, and weird stars). Neutron stars are roughly 10 kilometers (6 miles) in diameter and weigh 1.4 solar masses. They are the outcome of a large star's supernova explosion coupled with gravitational collapse, which reduces the core's density to that of atomic nuclei from white dwarf star density. Once formed, they gradually cool down and stop actively producing heat, although they can still evolve further through collision or accretion. Neutrons are subatomic particles with no net electrical charge and a slightly larger mass than protons. According to the majority of basic models for these objects, neutron stars are almost entirely composed of neutrons; under the conditions in a neutron star, protons and electrons combine to create neutrons.
To know more about neutron star please refer: https://brainly.com/question/1322201
#SPJ4
for what wavelength of light is the scattering only 2.00 % that of light with a visible wavelength of 520 nm ?
Potentially, optical scattering can be employed to create a solids content assessment instrument that is useful for managing and monitoring tailings ponds.
This bench-scale study looked into the best laser wavelengths for real-time in situ use in oil sands tailings in the visible (405, 520, and 658 nm) and near infrared (980, 1310, and 1550 nm) ranges. In comparison to the visible wavelengths, the near infrared wavelengths generally showed greater sensitivity across the full test range. Additionally, oil sands tailings' remaining bitumen has a tendency to absorb visible wavelengths, interfering with the scattering light signals and resulting in unreliable results. The 1550 nm wavelength in particular demonstrated an almost linear sensitivity of the light scattering with the change in solids concentration due to a sufficiently strong water absorption.
Learn more about wavelength here-
https://brainly.com/question/13533093
#SPJ4
on average, what percentage of our total energy output is attributable to the thermic effect of food (tef)?
The percentage of our total energy output is attributable to the thermic effect of food up to 10%.
Decreased thermic effects of food are observed differently in the elderly and may predispose them to fat gain. Increased energy expenditure is very important for weight loss efforts.
Types of vigorous activity that can boost your metabolism include brisk walking 2 miles or biking uphill. Total Energy Expenditure The amount of energy you expend per day includes not only the calories you expend during physical activity but also the calories expended at rest the calories expended when digesting food and heat generation.
Learn more about The thermic effect here:- https://brainly.com/question/29801013
#SPJ4
016 (part 1 of 2) 10.0 points
A neutron in a reactor makes an elastic headon collision with the nucleus of an atom initially at rest.
Assume: The mass of the atomic nucleus is
about 11.1 the mass of the neutron.
What fraction of the neutron’s kinetic energy is transferred to the atomic nucleus?
017 (part 2 of 2) 10.0 points
If the initial kinetic energy of the neutron is
4.2 × 10−13 J, find its final kinetic energy.
Answer in units of J.
No Rounding
The fraction of the neutron's kinetic energy transferred to the atomic nucleus is 0.09
If the initial kinetic energy of the neutron is
4.2 × 10−13 J, its final kinetic energy will be 3.82 x 10⁻¹³ J
What is kinetic energy?The kinetic energy of an object is described as the energy that it possesses due to its motion which is also the work needed to accelerate a body of a given mass from rest to its stated velocity.
In elastic head-on collision, the energy of the system and total momentum is conserved.
For the neutron,
m - mass
Vi - initial velocity
Vf - final velocity
For the atom ,
M- mass
Mi - initial velocity
Mf - final velocity
The initial kinetic energy of the neutron is calculated as;
K.Ei = ¹/₂m₁u₁²
The final kinetic energy of the atomic nucleus will be;
K.Ef = ¹/₂m₂u₂²
K.Ef = ¹/₂(11.1 m₁)(0.09u₁)²
K.Ef = 0.09 (¹/₂m₁u₁²)
K.Ef = 0.09 (K.Ei)
The fraction of neutron's kinetic energy transferred will be
= 0.09 (K.Ei) / K.Ei
= 0.09
= 9 %
The final kinetic energy of the neutron will be;
K.E.f (neutron) = (1 - 0.09) x (4.2 x 10⁻¹³ J)
K.E.f (neutron) = 3.82 x 10⁻¹³ J
Learn more about kinetic energy at: https://brainly.com/question/20658056
#SPJ1
points a (at (10,10) m) and b (at (1, 1) m) are in a region where the electric field is uniform and given by n/c. what is the potential difference ?
-144 V is the calculated value. The difference in charge carriers' energy between two places in a circuit is known as the potential difference.
Voltage is another name for potential difference, which is measured in volts (V). A simple measure of how much potential energy is gained or lost per coulomb when it moves from one location to another is the potential difference or voltage.
A = (2, 3) m = 2 I + 3 j
B = (5, 7) m = 5 I + 7 j
Displacement vector: (3 I + 4 j) m = AB = B - A
E = (4 I + 3 j) N/C for the electric field.
V = - E . AB
V = - (4 I + 3 j) . (3 I + 4 j)
V = - (12 + 12) = - 144 V
Learn more about voltage here-
https://brainly.com/question/2364325
#SPJ4
the fewer the periods over which one takes a moving average, the more accurately the resulting forecast mirrors the actual data of the most recent time periods. true false
True; the fewer the periods over which one takes a moving average, the more accurately the resulting forecast mirrors the actual data of the most recent time periods.
The length of time needed for one full cycle of vibration to pass a specific location is indicated by the letter "T" as a time period. The length of a wave shortens with increasing frequency. "Seconds" is the unit of measure for duration. length of time the period of time that a behavior or condition persists. Time, often known as the period of oscillation, or T, is a unit that can be measured in either seconds or millions of years, depending on the activity or circumstance under consideration. T is equal to 2 or T = 2/. According to the formula f = 1/T = /2, the period, or frequency f, is expressed as an oscillation per second.
Learn more about time periods here:
https://brainly.com/question/22991417
#SPJ4
two coins are released from the same height in an experiment. the first is dropped vertically. the second slides down a frictionless track. which coin has the greatest speed when they reach the bottom?
Answer:
1/2 m v^2 = E conservation of energy
Both will have the same speed.
v = (s2 - s1) / t holds for both coins
The coin that slides down the frictionless track will take longer to reach the bottom - the speed for both at the bottom will be the same
Calculate the acceleration of the car in stage A if it has a mass of 1200kg
stage A: 3000N
Answer:
2.5 m/s²
Explanation:
F = ma (Newton's 2nd Law)
a = F/m = 3,000 N / 1,200 kg = 2.5 m/s²