Answer:
Perpendicular to the polarization
Explanation:
In this question, we are interested in selecting the option that best complete the question.
The direction of propagation of light is perpendicular to the polarization. Polarized and unpolarized light behave in different manners.
In unpolarized light, the oscillation of the magnetic and electric occurs in all directions to the propagated light.
However, in the case of polarized light, there is a restriction of the electric field oscillation. And thus, it only oscillates in a direction which is perpendicular to the propagation light
In an emergency an airplane needs to land on a short runway at Albany County Airport. The plane comes in for a landing with a speed of 95 m/s. The planes maximum magnitude of acceleration is 7.07 m/s2 as it comes to a stop. (a) What is the minimum time interval needed for this plane to stop?
Answer:
t = 13.43 s
Explanation:
In order to find the minimum time required by the plane to stop, we will use the first equation of motion. The first equation of motion is written as follows:
Vf = Vi + at
where,
Vf = Final Velocity of the Plane = 0 m/s (Since, the plane finally stops)
Vi = Initial Velocity of the Plane = 95 m/s
a = deceleration of the plane = - 7.07 m/s²
t = minimum time interval needed to stop the plane = ?
Therefore,
0 m/s = 95 m/s + (- 7.07 m/s²)t
t = (95 m/s)/(7.07 m/s²)
t = 13.43 s
sort the properties of metalloids into the correct categories
Boron
Sillicon
Germanium
Arsenic
Antimony
Tellurium
Pelorium
Metallic characteristics: lustrous, solid at room temperature
In-between characteristics: semiconducting, amphoteric
Nonmetallic: brittle
Juan, a biologist, notices that a particular group of hummingbirds leaves during the colder winter months and returns during the warmer spring months. Juan hypothesizes that the birds fly south to locations with warmer weather and blooming flowers during the winter months. Which procedure should Juan use to test his hypothesis?
Answer:
C. Tag the hummingbirds with transmitters and track their movement.
Explanation:
Hypothesis refers to the conclusion of the analysis found on the grounds of certain observations. The hypothesis is further tested and verified by performing certain experiments. In the given excerpt, Juan hypothesizes that certain group of hummingbirds fly to certain locations depending upon the season. To test the hypothesis, Juan can experiment with finding and tracking the hummingbirds and the direction in which they fly. Tagging the hummingbirds with transmitters and tracking their movement would help Juan concluding about the hypothesis.
Answer:
Tag the hummingbirds with transmitters and track their movement
Explanation:
Add these two velocity vectors to find the magnitude of their resultant vector. A. 4.6 meters/second B. 0.8 meters/second C. 2.2 meters/second D. 7.0 meters/second
The magnitude of the resultant vector is D, 7.0 meters/second, and the direction is to the left.
How to find magnitude?To add these two velocity vectors, find the magnitude and direction of each vector. The magnitude of the first vector is 5.8 meters/second, and the direction is to the right. The magnitude of the second vector is 1.2 meters/second, and the direction is to the left.
To find the magnitude of the resultant vector, add the magnitudes of the two vectors. The magnitude of the resultant vector is 5.8 meters/second + 1.2 meters/second = 7.0 meters/second.
To find the direction of the resultant vector, find the angle between the two vectors. The angle between the two vectors is 180 degrees. The direction of the resultant vector is 180 degrees from the first vector, which is to the left.
Therefore, the magnitude of the resultant vector is 7.0 meters/second, and the direction is to the left.
Find out more on resultant vector here: https://brainly.com/question/28047791
#SPJ1
A car runs around a circular race track from the point A to diametrically opposite point B The radius of the circle is ‘r’ . The distance traveled by the car is ________ the displacement of the car is _________ show your work!
Answer:
Distance = πr
Displacement = 2r
Explanation:
First we need to find the distance covered by the car. As the car is travelling on a circular path and it traveled to a diametrically opposite point on the circular path. Therefore, the distance covered by the car must be the half value of the circumference.
Distance = Circumference/2
Distance = 2πr/2
Distance = πr
Since, displacement is the straight line distance between two points. So, the displacement in moving from a point to its diametrically opposite point must be equal to the diameter of circle:
Displacement = Diameter
Displacement = 2r
Use the exact values you enter to make later calculations. Jack and Jill are on two different floors of their high rise office building and looking out of their respective windows. Jack sees a flower pot go past his window ledge and Jill sees the same pot go past her window ledge a little while later. The time between the two observed events was 4.0 s. Assume air resistance is negligible. (a) If the speed of the pot as it passes Jill's window is 60.0 m/s, what was its speed when Jack saw it go by
The part B of the question is missing and it is;
b) What is the height between the two window ledges?
Answer:
A) 20.76 m/s
B) 161.52 m
Explanation:
A) To calculate the initial speed we use the formula from Newton's first law of motion:
v = u + at
Making u the subject gives;
u = v - at
Where;
v is the final velocity which is the speed when Jill sees the pot = 60 m/s
u is the initial velocity which is the speed when Jack sees the pot go by
t is the time between the two observed events = 4 s
a in this question is acceleration due to gravity = 9.81 m/s².
Plugging in the relevant values into the initial velocity equation gives;
u = 60 - (9.81 × 4)
u = 20.76 m/s
B) To get the height difference, we will use the formula;
(y1 - y0) = ut + ½at²
Thus, plugging in the relevant values, we have;
y1 - y0 = (20.76 × 4) + (½ × 9.81 × 4²)
(y1 - y0) = 161.52 m
Select the correct answer. As per the new modified method of classifying the magnitude of stars, what kind of values were the brightest stars assigned? A. negative values B. positive values C. fractional values D. letters
Answer:
A. Negative values
Explanation:
Answer:
A-negative values
Explanation:
As per the new modified method of classifying the magnitude of stars, what kind of values were the brightest stars assigned?
A.
negative values
B.
positive values
C.
fractional values
D.
letters
Meter #1 can measure voltage to within 0.1 volts. Meter #2 can measure voltage to within 0.01 volts.
A.) Which meter has the greatest precision?
B.) Which meter is more accurate? Why?
Meter #2 is more precise.
There's no information here that tells us which meter is more accurate.
What the answers due in 2 min
Hello ┬┴┬┴┤◕3◕)づ├┬┴┬┴
The answer is 3 m
the gap in between 4s and 6s is 5s
you follow your finger up to the purple like, and follow the purple line in a straight line to the left. It ends at 3m and that is your answer.
A stone is thrown vertically downward with an initial speed of 12.0 m/s from the top of a
building. The stone takes 1.54 s to reach the ground.
The question is incomplete; However, the height from which the stone is thrown is most likely to be what's required of the question
Answer:
See Explanation
Explanation:
Given
[tex]Initial\ Speed, u = 12.0m/s[/tex]
[tex]Time, t = 1.54\ s[/tex]
Required
Determine the height
This question will be answered using the following equation of motion;
[tex]S = ut + \frac{1}{2}gt^2[/tex]
Take g as 9.8
This gives:
[tex]S = 12 * 1.54 + \frac{1}{2} * 9.8 * 1.54^2[/tex]
[tex]S = 12 * 1.54 + \frac{1}{2} * 9.8 * 2.3716[/tex]
[tex]S = 18.48 + 11.62084[/tex]
[tex]S = 30.10084[/tex]
[tex]S = 30.1\ m[/tex] (Approximated)
Hence; Height = 30.1m
Newtons third law of motion states that if a force is exerted on an object, another force occurs that, A. is equal in speed and opposite direction
B. is equal in side an opposite in direction
C. is in the same direction and speed
D. is in the same direction and size.
Answer:
Newton's third law: If an object A exerts a force on object B, then object B must exert a force of equal magnitude and opposite direction back on object A. This law represents a certain symmetry in nature: forces always occur in pairs, and one body cannot exert a force on another without experiencing a force itself.
Explanation:
Newtons third law of motion states that if a force is exerted on an object, another force occurs that is equal in side an opposite in direction.
What is force?A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.
Newton's third law: If an object A exerts a force on object B, then object B must exert a force of equal magnitude and opposite direction back on object A. This law represents a certain symmetry in nature forces always occur in pairs, and one body cannot exert a force on another without experiencing a force itself.
Newtons third law of motion states that if a force is exerted on an object, another force occurs that is equal in side an opposite in direction.
To learn more about force refer to the link:
brainly.com/question/13191643
#SPJ2
What potential difference is required to produce a current of 0.5 A in a bulb of power 60 W
Answer:
ans is 120
Explanation:
I= 0.5 A
p= 60w
p=Iv
60/0.5
v= 120
Answer:
V=P/I
V=60/0.5
V=120
Explanaton:
the formula P=IV is converted to V=P/I to make V (voltage) the subject. then sub in the values to get your answer
note that potential difference is same as voltage
Which statement illustrates how engineering has influences society
Answer:
I think C but I'm not sure
The statement that illustrates how engineering has influences society is nuclear power plants provide cheap electricity to power people's homes. The correct option is A.
This claim serves as an example of how engineering has impacted society. Because they offer a practical and economical source of electricity for lighting up homes and other infrastructure, nuclear power plants have had a big impact on society.
The ability to create electricity from the energy held in atoms thanks to improvements in nuclear technology has boosted the availability and affordability of power for users.
This illustrates how advances in engineering can influence and enhance how society fulfils its energy needs.
Thus, the correct option is A.
For more details regarding nuclear technology, visit:
https://brainly.com/question/15059972
#SPJ5
Two identical pellet guns are fired simultaneously from the edge of a cliff. These guns impart an initial speed of 23.7 m/s to each pellet. Gun A is fired straight upward, with the pellet going up and then falling back down, eventually hitting the ground beneath the cliff. Gun B is fired straight downward. In the absence of air resistance, how long after pellet B hits the ground does pellet A hit the ground
Answer:
Ta - Tb = 4.84 sec (approx)
Explanation:
Time taken by A = Time taken By B + Extra time
Ta - Tb = T
We know that
Time (T) = [v-u] /a ...................[a=9.8 m/s²]
So,
Ta - Tb = [v-u] /a
Ta - Tb = [-23.7-23.7] /9.8
Ta - Tb = 4.8367 sec
Ta - Tb = 4.84 sec (approx)
Which has the fastest wave speed, a high frequency sound or a low frequency sound?
Answer:
high frequent sound
Explanation:
because if its low than its slower.
The diagram below shows a star map. Which position would a planet most likely be at? A, B, C, or D?
The unit of the Power of a correction glass is the Diopter (D), As you know the Di ressed by means of a meter and thus we could express it as:
A. TC/(Ns)
B. Cv/N
C. J/N
D. None of above
where T- Tesla, v-volt, C-Coulomb, J-Joule
Answer:
reviewing the final answers the correct one is D none of the above
Explanation:
Diotria is highly used in ophthalmology and is related to distance by
P = 1 / f
where f is the focal length of the lens in meters
Therefore from the previous definition the unit of dioctry is the inverse of the meter
[P] = [1 / m]
when reviewing the final answers the correct one is D none of the above
does potential thermal energy affect the temperature of an object?
Answer:
Yes, it does
Explanation:
There are not many explanations, but when thermal energy is shined on an object it usually starts to heat up.
Thermal effects refers to the:
Answer:
removal of heat by cooling towers
What is the speed of an ocean wave if it’s wavelength is 5.0 m and it’s frequency is 3/s?
Answer:
15 m/s
Explanation:
We know that [tex]v = f * d[/tex] where f = frequency & d = wavelength .
So here.
Wavelength = 5 m
Frequency = 3 s⁻¹
Hence Speed = 5 * 3 = 15 m/s
Two forces P and Q act on an object of mass 7.00 kg with Q being the larger of the two forces. When both forces are directed to the left, the magnitude of the acceleration of the object is 1.30 m/s2. However, when the force P is directed to the left and the force Q is directed to the right, the object has an acceleration of 0.600 m/s2 to the right. Find the magnitudes of the two forces P and Q in newtons.
Answer:
P = 2.45 N
Q = 6.65 N
Explanation:
According to Newton's 2nd Law:
Unbalanced Force = ma
where,
m = mass = 7 kg
a = acceleration
In the first case when both forces P and Q act on left side:
Unbalanced Force = P + Q
a = 1.3 m/s²
Therefore,
P + Q = (7 kg)(1.3 m/s²)
P + Q = 9.1 N ------------------------- equation 1
Now, in second case when both forces have different directions:
Unbalanced Force = Greater Force - Smaller Force
Unbalanced Force = Q - P
a = 0.6 m/s²
Therefore,
Q - P = (7 kg)(0.6 m/s²)
Q - P = 4.2 N ------------------- equation 2
Adding equation 1 and equation 2, we get:
(Q + P) + (Q - P) = 9.1 N + 4.2 N
2 Q = 13.3 N
Q = 6.65 N
Using this value in equation 2, we get:
6.65 N - P = 4.2 N
P = 2.45 N
It is easier to open the lid of a can using a spoon why?
Answer:
It depends on how you use the spoon...
if you are keeping one end of the spoon and pressing other end, the force you provide is supported by the force due to gravity... Hence it is easy to open this way :)
F + G ... Where F is the force you provide and G is the force due to gravity.
Compare How does
the horse's average speed
from 60 s to 120 s compare
to its average speed from
120 s to 180 s?
Answer:
3.75 m/s
Explanation:
Formula:
Average Speed = Total Distance / Total Time
Given:
Total Distance = 150 m
Total Time = 160 - 120 = 40 s
To Find:
Average Speed
Solution:
Average Speed = 150/40
Average Speed = 3.75 m/s
can anyone help me with this.
Answer:
A. smaller arteries
Explanation:
A. because it makes no sence.
A squirrel is running a race where she is on track for her average velocity to be 6.0 m/s. She is distracted by a dummy of an attractive male squirrel and pauses for 3.0 s. As a result her average velocity ends up being 5.0 m/s instead. What is the length of the race? [HINT: construct two equations with the same two unknowns in them and you can solve the system of equations]
Answer:
90 m
Explanation:
There are two unknowns: the amount of time the squirrel spent running, and the length of the race. Let's call these t and x, respectively.
The average velocity is the total distance divided by the total time.
5.0 m/s = x / (t + 3.0)
The total distance is the time she spent running times the speed she ran at.
x = (6.0 m/s) t
Substitute and solve:
5 = 6t / (t + 3)
5 (t + 3) = 6t
5t + 15 = 6t
t = 15
She ran for 15 seconds (not including the 3 seconds she stopped). So the length of the race is:
x = (6.0 m/s) (15 s)
x = 90 m
Since Allura Red is red in color, why did we choose to use monitor the wavelength of 470 nm? does allura red transmit or absorb red light ?
Answer:
Wavelenght of light in the range of 470nm is that of blue colourand Allura red absorbs this blue light and reflects the red light
Then we can say Allura red absorbs all light colours but reflect red
Allura is red due to the fact that it absorbs the light that's in the wavelength.
From the complete information, it should be noted that even though allura red is red in color, we choose to use monitor the wavelength of 470nm because absorbs the light that's in the wavelength range of blue color and thereby reflects the red wavelength.
It should also be noted that the allura red absorbs all the other wavelengths. It doesn't absorb the red light but rather it reflects it.
In conclusion, the red light will be reflected.
Read related link on:
https://brainly.com/question/14524069
2. The components of vector A are given as follows:
Ax = 5.6 Ay = -4.7
What is the angle between vector A and positive direction of x-axis?
Answer:
50 degree.
Explanation:
Given that the components of vector A are given as follows: Ax = 5.6 Ay = -4.7
The angle between vector A and B in the positive direction of x-axis will be achieved by using the formula:
Tan Ø = Ay/Ax
Substitute Ay and Ax into the formula above.
Tan Ø = -4.7 / 5.6
Tan Ø = -0.839
Ø = tan^-1(-0. 839)
Ø = - 40 degree
Therefore, the angle between vector A and B positive direction of x-axis will be
90 - 40 = 50 degree.
Organized procedure to study something under controlled conditions
How much power is needed to lift the 200-N object to a height of 10 m in 4 s?
Answer:
500 watts
Explanation:
Recall that the definition of power is the amount of energy delivered per unit of time.
In our case, the energy delivered is potential energy which we can estimate as the product of the weight of the object times the distance it is lifted above ground:
200 N x 10 m = 2000 Nm
then the power is the quotient of this potential energy divided the time it took to lift the object to that position:
Power = 2000 / 4 Nm/s = 500 Nm/s = 500 watts
how many legs a cow has